summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/asrock/g41c-gs/romstage.c39
-rw-r--r--src/mainboard/asus/p5qc/romstage.c46
-rw-r--r--src/mainboard/asus/p5ql-em/romstage.c51
-rw-r--r--src/mainboard/asus/p5qpl-am/romstage.c48
-rw-r--r--src/mainboard/foxconn/g41s-k/romstage.c49
-rw-r--r--src/mainboard/gigabyte/ga-g41m-es2l/romstage.c48
-rw-r--r--src/mainboard/intel/dg41wv/romstage.c42
-rw-r--r--src/mainboard/intel/dg43gt/romstage.c46
-rw-r--r--src/mainboard/lenovo/thinkcentre_a58/romstage.c39
-rw-r--r--src/northbridge/intel/x4x/Makefile.inc1
-rw-r--r--src/northbridge/intel/x4x/romstage.c71
-rw-r--r--src/northbridge/intel/x4x/x4x.h3
12 files changed, 150 insertions, 333 deletions
diff --git a/src/mainboard/asrock/g41c-gs/romstage.c b/src/mainboard/asrock/g41c-gs/romstage.c
index b054897509..06e13eb652 100644
--- a/src/mainboard/asrock/g41c-gs/romstage.c
+++ b/src/mainboard/asrock/g41c-gs/romstage.c
@@ -16,11 +16,7 @@
*/
#include <device/pnp_ops.h>
-#include <device/pci_ops.h>
-#include <console/console.h>
-#include <arch/romstage.h>
#include <northbridge/intel/x4x/x4x.h>
-#include <southbridge/intel/common/pmclib.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
#include <superio/nuvoton/common/nuvoton.h>
#include <superio/nuvoton/nct6776/nct6776.h>
@@ -30,9 +26,8 @@
#define SERIAL_DEV_R2 PNP_DEV(0x2e, NCT6776_SP1)
#define SERIAL_DEV_R1 PNP_DEV(0x2e, W83627DHG_SP1)
#define SUPERIO_DEV PNP_DEV(0x2e, 0)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
-static void mb_lpc_setup(void)
+void mb_lpc_setup(void)
{
/* Set GPIOs on superio, enable UART */
if (CONFIG(SUPERIO_NUVOTON_NCT6776)) {
@@ -53,34 +48,8 @@ static void mb_lpc_setup(void)
RCBA16(D29IR) = 0x0237;
}
-void mainboard_romstage_entry(void)
+void mb_get_spd_map(u8 spd_map[4])
{
- // ch0 ch1
- const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
- u8 boot_path = 0;
- u8 s3_resume;
-
- /* Set southbridge and Super I/O GPIOs. */
- i82801gx_lpc_setup();
- mb_lpc_setup();
-
- console_init();
-
- enable_smbus();
-
- i82801gx_early_init();
- x4x_early_init();
-
- s3_resume = southbridge_detect_s3_resume();
- if (s3_resume)
- boot_path = BOOT_PATH_RESUME;
- if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
- boot_path = BOOT_PATH_WARM_RESET;
-
- sdram_initialize(boot_path, spd_addrmap);
-
- x4x_late_init(s3_resume);
-
- printk(BIOS_DEBUG, "x4x late init complete\n");
-
+ spd_map[0] = 0x50;
+ spd_map[2] = 0x52;
}
diff --git a/src/mainboard/asus/p5qc/romstage.c b/src/mainboard/asus/p5qc/romstage.c
index 9a90f74189..53aa176b38 100644
--- a/src/mainboard/asus/p5qc/romstage.c
+++ b/src/mainboard/asus/p5qc/romstage.c
@@ -14,57 +14,27 @@
* GNU General Public License for more details.
*/
-#include <device/pci_ops.h>
-#include <console/console.h>
#include <southbridge/intel/i82801jx/i82801jx.h>
-#include <southbridge/intel/common/pmclib.h>
#include <northbridge/intel/x4x/x4x.h>
-#include <arch/romstage.h>
#include <superio/winbond/w83667hg-a/w83667hg-a.h>
#include <superio/winbond/common/winbond.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83667HG_A_SP1)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
-/* Early mainboard specific GPIO setup.
- * We should use standard gpio.h eventually
- */
-
-static void mb_misc_rcba(void)
+void mb_lpc_setup(void)
{
/* TODO? */
RCBA32(RCBA_CG) = 0xbf7f001f;
RCBA32(0x3430) = 0x00000002;
RCBA32(0x3f00) = 0x00000038;
-}
-void mainboard_romstage_entry(void)
-{
- const u8 spd_addrmap[4] = { 0x50, 0x51, 0x52, 0x53 };
- u8 boot_path = 0;
- u8 s3_resume;
-
- /* Set southbridge and Super I/O GPIOs. */
- i82801jx_lpc_setup();
- mb_misc_rcba();
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
- console_init();
-
- enable_smbus();
-
- i82801jx_early_init();
- x4x_early_init();
-
- s3_resume = southbridge_detect_s3_resume();
- if (s3_resume)
- boot_path = BOOT_PATH_RESUME;
- if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
- boot_path = BOOT_PATH_WARM_RESET;
-
- sdram_initialize(boot_path, spd_addrmap);
-
- x4x_late_init(s3_resume);
-
- printk(BIOS_DEBUG, "x4x late init complete\n");
+void mb_get_spd_map(u8 spd_map[4])
+{
+ spd_map[0] = 0x50;
+ spd_map[1] = 0x51;
+ spd_map[2] = 0x52;
+ spd_map[3] = 0x53;
}
diff --git a/src/mainboard/asus/p5ql-em/romstage.c b/src/mainboard/asus/p5ql-em/romstage.c
index c7ade1c541..fa22a645d4 100644
--- a/src/mainboard/asus/p5ql-em/romstage.c
+++ b/src/mainboard/asus/p5ql-em/romstage.c
@@ -12,22 +12,22 @@
* GNU General Public License for more details.
*/
-#include <device/pci_ops.h>
#include <device/pnp_ops.h>
#include <console/console.h>
-#include <southbridge/intel/i82801jx/i82801jx.h>
-#include <southbridge/intel/common/pmclib.h>
#include <northbridge/intel/x4x/x4x.h>
#include <cpu/x86/msr.h>
#include <cpu/intel/speedstep.h>
-#include <arch/romstage.h>
#include <cf9_reset.h>
#include <superio/winbond/w83627dhg/w83627dhg.h>
#include <superio/winbond/common/winbond.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
#define GPIO_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
+
+void mb_lpc_setup(void)
+{
+ winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
static u8 msr_get_fsb(void)
{
@@ -103,41 +103,20 @@ static int setup_sio_gpio(void)
return need_reset;
}
-void mainboard_romstage_entry(void)
+void mb_pre_raminit_setup(int s3_resume)
{
- /* This board has first dimm slot of each channel hooked up to
- rank0 and rank1, while the second dimm slot is only connected
- to rank1. The raminit does not support such setups
- const u8 spd_addrmap[4] = { 0x50, 0x51, 0x52, 0x53 }; */
- const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
- u8 boot_path = 0;
- u8 s3_resume;
-
- /* Set southbridge and Super I/O GPIOs. */
- i82801jx_lpc_setup();
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
- console_init();
-
- enable_smbus();
-
- i82801jx_early_init();
- x4x_early_init();
-
- s3_resume = southbridge_detect_s3_resume();
- if (s3_resume)
- boot_path = BOOT_PATH_RESUME;
- if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
- boot_path = BOOT_PATH_WARM_RESET;
-
if (!s3_resume && setup_sio_gpio()) {
printk(BIOS_DEBUG, "Needs reset to configure CPU BSEL straps\n");
full_reset();
}
+}
- sdram_initialize(boot_path, spd_addrmap);
-
- x4x_late_init(s3_resume);
-
- printk(BIOS_DEBUG, "x4x late init complete\n");
+void mb_get_spd_map(u8 spd_map[4])
+{
+ /* This board has first dimm slot of each channel hooked up to
+ rank0 and rank1, while the second dimm slot is only connected
+ to rank1. The raminit does not support such setups. So only the
+ first dimms of each channel are used. */
+ spd_map[0] = 0x50;
+ spd_map[2] = 0x52;
}
diff --git a/src/mainboard/asus/p5qpl-am/romstage.c b/src/mainboard/asus/p5qpl-am/romstage.c
index de3972db4e..ad16c0f72a 100644
--- a/src/mainboard/asus/p5qpl-am/romstage.c
+++ b/src/mainboard/asus/p5qpl-am/romstage.c
@@ -17,20 +17,20 @@
#include <cf9_reset.h>
#include <device/pnp_ops.h>
-#include <device/pci_ops.h>
#include <console/console.h>
-#include <arch/romstage.h>
#include <cpu/intel/speedstep.h>
#include <cpu/x86/msr.h>
#include <northbridge/intel/x4x/x4x.h>
-#include <southbridge/intel/common/pmclib.h>
-#include <southbridge/intel/i82801gx/i82801gx.h>
#include <superio/winbond/common/winbond.h>
#include <superio/winbond/w83627dhg/w83627dhg.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
#define GPIO_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
+
+void mb_lpc_setup(void)
+{
+ winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
static u8 msr_get_fsb(void)
{
@@ -127,40 +127,16 @@ static int setup_sio_gpio(void)
return need_reset;
}
-void mainboard_romstage_entry(void)
+void mb_pre_raminit_setup(int s3_resume)
{
- // ch0 ch1
- const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
- u8 boot_path = 0;
- u8 s3_resume;
-
- /* Set southbridge and Super I/O GPIOs. */
- i82801gx_lpc_setup();
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
- console_init();
-
- enable_smbus();
-
- i82801gx_early_init();
- x4x_early_init();
-
- s3_resume = southbridge_detect_s3_resume();
- if (s3_resume)
- boot_path = BOOT_PATH_RESUME;
- if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
- boot_path = BOOT_PATH_WARM_RESET;
-
if (!s3_resume && setup_sio_gpio()) {
- printk(BIOS_DEBUG,
- "Needs reset to configure CPU BSEL straps\n");
+ printk(BIOS_DEBUG, "Needs reset to configure CPU BSEL straps\n");
full_reset();
}
+}
- sdram_initialize(boot_path, spd_addrmap);
-
- x4x_late_init(s3_resume);
-
- printk(BIOS_DEBUG, "x4x late init complete\n");
-
+void mb_get_spd_map(u8 spd_map[4])
+{
+ spd_map[0] = 0x50;
+ spd_map[2] = 0x52;
}
diff --git a/src/mainboard/foxconn/g41s-k/romstage.c b/src/mainboard/foxconn/g41s-k/romstage.c
index 45ff7e458e..b4bd77d78b 100644
--- a/src/mainboard/foxconn/g41s-k/romstage.c
+++ b/src/mainboard/foxconn/g41s-k/romstage.c
@@ -16,20 +16,15 @@
* GNU General Public License for more details.
*/
-#include <console/console.h>
-#include <arch/romstage.h>
-#include <device/pci_ops.h>
#include <northbridge/intel/x4x/x4x.h>
-#include <southbridge/intel/common/pmclib.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
#include <superio/ite/common/ite.h>
#include <superio/ite/it8720f/it8720f.h>
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
#define SERIAL_DEV PNP_DEV(0x2e, IT8720F_SP1)
#define GPIO_DEV PNP_DEV(0x2e, IT8720F_GPIO)
-static void mb_lpc_setup(void)
+void mb_lpc_setup(void)
{
/* Set up GPIOs on Super I/O. */
ite_reg_write(GPIO_DEV, 0x25, 0x01);
@@ -55,43 +50,13 @@ static void mb_lpc_setup(void)
RCBA16(D29IR) = 0x0237;
RCBA32(FD) |= FD_INTLAN;
-}
-
-void mainboard_romstage_entry(void)
-{
- // ch0 ch1
-#if CONFIG(BOARD_FOXCONN_G41S_K)
- const u8 spd_addrmap[4] = { 0x50, 0, 0, 0 };
-#else
- /* TODO adapt raminit such that other slots can be used
- * for single rank dimms */
- const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
-#endif
- u8 boot_path = 0;
- u8 s3_resume;
- /* Set up southbridge and Super I/O GPIOs. */
- i82801gx_lpc_setup();
- mb_lpc_setup();
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
- console_init();
-
- enable_smbus();
-
- i82801gx_early_init();
- x4x_early_init();
-
- s3_resume = southbridge_detect_s3_resume();
- if (s3_resume)
- boot_path = BOOT_PATH_RESUME;
- if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
- boot_path = BOOT_PATH_WARM_RESET;
-
- sdram_initialize(boot_path, spd_addrmap);
-
- x4x_late_init(s3_resume);
-
- printk(BIOS_DEBUG, "x4x late init complete\n");
-
+void mb_get_spd_map(u8 spd_map[4])
+{
+ spd_map[0] = 0x50;
+ if (CONFIG(BOARD_FOXCONN_G41M))
+ spd_map[2] = 0x52;
}
diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c b/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c
index 16b157b2dd..bde4f33bef 100644
--- a/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c
+++ b/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c
@@ -14,14 +14,9 @@
* GNU General Public License for more details.
*/
-#include <stdint.h>
-#include <device/pci_def.h>
#include <device/pci_ops.h>
-#include <console/console.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
#include <northbridge/intel/x4x/x4x.h>
-#include <arch/romstage.h>
#include <superio/ite/it8718f/it8718f.h>
#include <superio/ite/common/ite.h>
@@ -34,7 +29,7 @@
* We should use standard gpio.h eventually
*/
-static void mb_lpc_init(void)
+void mb_lpc_setup(void)
{
pci_devfn_t dev;
@@ -73,6 +68,11 @@ static void mb_lpc_init(void)
ite_reg_write(EC_DEV, 0x70, 0x00); // Don't use IRQ9
ite_reg_write(EC_DEV, 0x30, 0x01); // Enable
+ ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+
+ /* Disable SIO reboot */
+ ite_reg_write(GPIO_DEV, 0xEF, 0x7E);
+
/* IRQ routing */
RCBA32(D31IP) = 0x00002210;
RCBA32(D30IP) = 0x00002100;
@@ -84,38 +84,8 @@ static void mb_lpc_init(void)
RCBA32(D27IR) = 0x00000000;
}
-void mainboard_romstage_entry(void)
+void mb_get_spd_map(u8 spd_map[4])
{
- // ch0 ch1
- const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
- u8 boot_path = 0;
- u8 s3_resume;
-
- /* Set southbridge and Super I/O GPIOs. */
- i82801gx_lpc_setup();
- mb_lpc_init();
- ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
- /* Disable SIO reboot */
- ite_reg_write(GPIO_DEV, 0xEF, 0x7E);
-
- console_init();
-
- enable_smbus();
-
- i82801gx_early_init();
- x4x_early_init();
-
- s3_resume = southbridge_detect_s3_resume();
- if (s3_resume)
- boot_path = BOOT_PATH_RESUME;
- if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
- boot_path = BOOT_PATH_WARM_RESET;
-
- sdram_initialize(boot_path, spd_addrmap);
-
- x4x_late_init(s3_resume);
-
- printk(BIOS_DEBUG, "x4x late init complete\n");
-
+ spd_map[0] = 0x50;
+ spd_map[2] = 0x52;
}
diff --git a/src/mainboard/intel/dg41wv/romstage.c b/src/mainboard/intel/dg41wv/romstage.c
index 0d7c162272..ff018af5f6 100644
--- a/src/mainboard/intel/dg41wv/romstage.c
+++ b/src/mainboard/intel/dg41wv/romstage.c
@@ -16,19 +16,14 @@
*/
#include <device/pnp_ops.h>
-#include <device/pci_ops.h>
-#include <console/console.h>
-#include <arch/romstage.h>
#include <northbridge/intel/x4x/x4x.h>
-#include <southbridge/intel/common/pmclib.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
#include <superio/winbond/common/winbond.h>
#include <superio/winbond/w83627dhg/w83627dhg.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
-static void mb_lpc_setup(void)
+void mb_lpc_setup(void)
{
/* Set GPIOs on superio, enable UART */
pnp_enter_ext_func_mode(SERIAL_DEV);
@@ -38,40 +33,15 @@ static void mb_lpc_setup(void)
pnp_exit_ext_func_mode(SERIAL_DEV);
+ winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+
/* IRQ routing */
RCBA16(D31IR) = 0x0132;
RCBA16(D29IR) = 0x0237;
}
-void mainboard_romstage_entry(void)
+void mb_get_spd_map(u8 spd_map[4])
{
- // ch0 ch1
- const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
- u8 boot_path = 0;
- u8 s3_resume;
-
- /* Set southbridge and Super I/O GPIOs. */
- i82801gx_lpc_setup();
- mb_lpc_setup();
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
- console_init();
-
- enable_smbus();
-
- i82801gx_early_init();
- x4x_early_init();
-
- s3_resume = southbridge_detect_s3_resume();
- if (s3_resume)
- boot_path = BOOT_PATH_RESUME;
- if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
- boot_path = BOOT_PATH_WARM_RESET;
-
- sdram_initialize(boot_path, spd_addrmap);
-
- x4x_late_init(s3_resume);
-
- printk(BIOS_DEBUG, "x4x late init complete\n");
-
+ spd_map[0] = 0x50;
+ spd_map[2] = 0x52;
}
diff --git a/src/mainboard/intel/dg43gt/romstage.c b/src/mainboard/intel/dg43gt/romstage.c
index b851f98627..71fd87ad74 100644
--- a/src/mainboard/intel/dg43gt/romstage.c
+++ b/src/mainboard/intel/dg43gt/romstage.c
@@ -14,23 +14,14 @@
* GNU General Public License for more details.
*/
-#include <device/pci_ops.h>
-#include <console/console.h>
#include <southbridge/intel/i82801jx/i82801jx.h>
-#include <southbridge/intel/common/pmclib.h>
#include <northbridge/intel/x4x/x4x.h>
-#include <arch/romstage.h>
#include <superio/winbond/w83627dhg/w83627dhg.h>
#include <superio/winbond/common/winbond.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
-/* Early mainboard specific GPIO setup.
- * We should use standard gpio.h eventually
- */
-
-static void mb_misc_rcba(void)
+void mb_lpc_setup(void)
{
RCBA32(0x3410) = 0x00060464;
RCBA32(RCBA_BUC) &= ~BUC_LAND;
@@ -38,35 +29,14 @@ static void mb_misc_rcba(void)
RCBA32(0x341c) = 0xbf7f001f;
RCBA32(0x3430) = 0x00000002;
RCBA32(0x3f00) = 0x0000000b;
-}
-void mainboard_romstage_entry(void)
-{
- const u8 spd_addrmap[4] = { 0x50, 0x51, 0x52, 0x53 };
- u8 boot_path = 0;
- u8 s3_resume;
-
- /* Set southbridge and Super I/O GPIOs. */
- i82801jx_lpc_setup();
- mb_misc_rcba();
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
- console_init();
-
- enable_smbus();
-
- i82801jx_early_init();
- x4x_early_init();
-
- s3_resume = southbridge_detect_s3_resume();
- if (s3_resume)
- boot_path = BOOT_PATH_RESUME;
- if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
- boot_path = BOOT_PATH_WARM_RESET;
-
- sdram_initialize(boot_path, spd_addrmap);
-
- x4x_late_init(s3_resume);
-
- printk(BIOS_DEBUG, "x4x late init complete\n");
+void mb_get_spd_map(u8 spd_map[4])
+{
+ spd_map[0] = 0x50;
+ spd_map[1] = 0x51;
+ spd_map[2] = 0x52;
+ spd_map[3] = 0x53;
}
diff --git a/src/mainboard/lenovo/thinkcentre_a58/romstage.c b/src/mainboard/lenovo/thinkcentre_a58/romstage.c
index 8be2c86734..5594cbdda6 100644
--- a/src/mainboard/lenovo/thinkcentre_a58/romstage.c
+++ b/src/mainboard/lenovo/thinkcentre_a58/romstage.c
@@ -15,45 +15,18 @@
* GNU General Public License for more details.
*/
-#include <console/console.h>
-#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
#include <northbridge/intel/x4x/x4x.h>
-#include <arch/romstage.h>
-#include <device/pci_ops.h>
#include <superio/smsc/smscsuperio/smscsuperio.h>
#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
-void mainboard_romstage_entry(void)
+void mb_lpc_setup(void)
{
- // ch0 ch1
- const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
- u8 boot_path = 0;
- u8 s3_resume;
-
- /* Set southbridge and Super I/O GPIOs. */
- i82801gx_lpc_setup();
smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
- console_init();
-
- enable_smbus();
-
- i82801gx_early_init();
- x4x_early_init();
-
- s3_resume = southbridge_detect_s3_resume();
- if (s3_resume)
- boot_path = BOOT_PATH_RESUME;
- if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
- boot_path = BOOT_PATH_WARM_RESET;
-
- sdram_initialize(boot_path, spd_addrmap);
-
- x4x_late_init(s3_resume);
-
- printk(BIOS_DEBUG, "x4x late init complete\n");
-
+void mb_get_spd_map(u8 spd_map[4])
+{
+ spd_map[0] = 0x50;
+ spd_map[2] = 0x52;
}
diff --git a/src/northbridge/intel/x4x/Makefile.inc b/src/northbridge/intel/x4x/Makefile.inc
index b7fd2fe7ae..79a03cb77e 100644
--- a/src/northbridge/intel/x4x/Makefile.inc
+++ b/src/northbridge/intel/x4x/Makefile.inc
@@ -23,6 +23,7 @@ romstage-y += memmap.c
romstage-y += rcven.c
romstage-y += raminit_tables.c
romstage-y += dq_dqs.c
+romstage-y += romstage.c
ramstage-y += acpi.c
ramstage-y += memmap.c
diff --git a/src/northbridge/intel/x4x/romstage.c b/src/northbridge/intel/x4x/romstage.c
new file mode 100644
index 0000000000..c3a503643f
--- /dev/null
+++ b/src/northbridge/intel/x4x/romstage.c
@@ -0,0 +1,71 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/pci_ops.h>
+#include <console/console.h>
+#include <southbridge/intel/common/pmclib.h>
+#include <northbridge/intel/x4x/x4x.h>
+#include <arch/romstage.h>
+
+#if CONFIG(SOUTHBRIDGE_INTEL_I82801JX)
+#include <southbridge/intel/i82801jx/i82801jx.h>
+#elif CONFIG(SOUTHBRIDGE_INTEL_I82801GX)
+#include <southbridge/intel/i82801gx/i82801gx.h>
+#endif
+
+__weak void mb_pre_raminit_setup(int s3_resume)
+{
+}
+
+void mainboard_romstage_entry(void)
+{
+ u8 spd_addr_map[4] = {};
+ u8 boot_path = 0;
+ u8 s3_resume;
+
+#if CONFIG(SOUTHBRIDGE_INTEL_I82801JX)
+ i82801jx_lpc_setup();
+#elif CONFIG(SOUTHBRIDGE_INTEL_I82801GX)
+ i82801gx_lpc_setup();
+#endif
+
+ mb_lpc_setup();
+
+ console_init();
+
+ enable_smbus();
+
+#if CONFIG(SOUTHBRIDGE_INTEL_I82801JX)
+ i82801jx_early_init();
+#elif CONFIG(SOUTHBRIDGE_INTEL_I82801GX)
+ i82801gx_early_init();
+#endif
+
+ x4x_early_init();
+
+ s3_resume = southbridge_detect_s3_resume();
+ mb_pre_raminit_setup(s3_resume);
+
+ if (s3_resume)
+ boot_path = BOOT_PATH_RESUME;
+ if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
+ boot_path = BOOT_PATH_WARM_RESET;
+
+ mb_get_spd_map(spd_addr_map);
+ sdram_initialize(boot_path, spd_addr_map);
+
+ x4x_late_init(s3_resume);
+
+ printk(BIOS_DEBUG, "x4x late init complete\n");
+}
diff --git a/src/northbridge/intel/x4x/x4x.h b/src/northbridge/intel/x4x/x4x.h
index 76e82d9494..e4a6c215d8 100644
--- a/src/northbridge/intel/x4x/x4x.h
+++ b/src/northbridge/intel/x4x/x4x.h
@@ -373,6 +373,9 @@ enum ddr2_signals {
void x4x_early_init(void);
void x4x_late_init(int s3resume);
+void mb_lpc_setup(void);
+void mb_get_spd_map(u8 spd_map[4]);
+void mb_pre_raminit_setup(int s3_resume);
u32 decode_igd_memory_size(u32 gms);
u32 decode_igd_gtt_size(u32 gsm);
u32 decode_tseg_size(const u32 esmramc);