summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/include/reg_script.h5
-rw-r--r--src/lib/reg_script.c3
-rw-r--r--src/soc/intel/fsp_baytrail/Kconfig117
-rw-r--r--src/soc/intel/fsp_baytrail/Makefile.inc70
-rw-r--r--src/soc/intel/fsp_baytrail/acpi.c577
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/device_nvs.asl82
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/globalnvs.asl99
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/gpio.asl105
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/irq_helper.h124
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/irqlinks.asl487
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/irqroute.asl45
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/lpc.asl138
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/lpe.asl114
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/lpss.asl707
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/platform.asl32
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/scc.asl182
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/southcluster.asl294
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/usb.asl48
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/xhci.asl31
-rw-r--r--src/soc/intel/fsp_baytrail/bootblock/bootblock.c126
-rw-r--r--src/soc/intel/fsp_baytrail/chip.c78
-rw-r--r--src/soc/intel/fsp_baytrail/chip.h360
-rw-r--r--src/soc/intel/fsp_baytrail/cpu.c185
-rw-r--r--src/soc/intel/fsp_baytrail/fsp/Kconfig37
-rw-r--r--src/soc/intel/fsp_baytrail/fsp/Makefile.inc17
-rw-r--r--src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c329
-rw-r--r--src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.h55
-rw-r--r--src/soc/intel/fsp_baytrail/gfx.c115
-rw-r--r--src/soc/intel/fsp_baytrail/gpio.c372
-rw-r--r--src/soc/intel/fsp_baytrail/i2c.c294
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/acpi.h36
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/baytrail.h65
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/device_nvs.h61
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/ehci.h40
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/gfx.h44
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/gpio.h442
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/i2c.h23
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/iomap.h89
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/iosf.h346
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/irq.h164
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/lpc.h109
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/msr.h34
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/nvs.h72
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/pattrs.h60
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/pci_devs.h216
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/pcie.h98
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/pmc.h292
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/ramstage.h30
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/romstage.h34
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/smm.h21
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/spi.h63
-rw-r--r--src/soc/intel/fsp_baytrail/include/soc/xhci.h52
-rw-r--r--src/soc/intel/fsp_baytrail/iosf.c274
-rw-r--r--src/soc/intel/fsp_baytrail/lpe.c186
-rw-r--r--src/soc/intel/fsp_baytrail/lpss.c152
-rw-r--r--src/soc/intel/fsp_baytrail/memmap.c52
-rw-r--r--src/soc/intel/fsp_baytrail/northcluster.c200
-rw-r--r--src/soc/intel/fsp_baytrail/placeholders.c23
-rw-r--r--src/soc/intel/fsp_baytrail/pmutil.c383
-rw-r--r--src/soc/intel/fsp_baytrail/ramstage.c159
-rw-r--r--src/soc/intel/fsp_baytrail/romstage/Makefile.inc20
-rw-r--r--src/soc/intel/fsp_baytrail/romstage/pmc.c35
-rw-r--r--src/soc/intel/fsp_baytrail/romstage/report_platform.c84
-rw-r--r--src/soc/intel/fsp_baytrail/romstage/romstage.c277
-rw-r--r--src/soc/intel/fsp_baytrail/romstage/uart.c34
-rw-r--r--src/soc/intel/fsp_baytrail/smihandler.c395
-rw-r--r--src/soc/intel/fsp_baytrail/smm.c141
-rw-r--r--src/soc/intel/fsp_baytrail/southcluster.c616
-rw-r--r--src/soc/intel/fsp_baytrail/spi.c584
-rw-r--r--src/soc/intel/fsp_baytrail/tsc_freq.c72
-rw-r--r--src/vendorcode/intel/Kconfig4
-rw-r--r--src/vendorcode/intel/Makefile.inc9
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/absf/minnowmax_1gb.absf328
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/absf/minnowmax_2gb.absf328
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/include/azalia.h66
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/include/fsp.h69
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/include/fspapi.h65
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/include/fspffs.h506
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/include/fspfv.h247
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/include/fsphob.h542
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/include/fspinfoheader.h62
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/include/fspplatform.h78
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/include/fsptypes.h116
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/include/fspvpd.h126
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/srx/board_fsp.c186
-rw-r--r--src/vendorcode/intel/fsp1_0/baytrail/srx/fsphob.c198
86 files changed, 3 insertions, 14233 deletions
diff --git a/src/include/reg_script.h b/src/include/reg_script.h
index c6fdd523ee..1d0c0d68dc 100644
--- a/src/include/reg_script.h
+++ b/src/include/reg_script.h
@@ -369,8 +369,7 @@ struct reg_script_bus_entry {
REG_RES_RXW32(bar_, reg_, 0xffffffff, value_)
-#if CONFIG(SOC_INTEL_BAYTRAIL) || \
-CONFIG(SOC_INTEL_FSP_BAYTRAIL)
+#if CONFIG(SOC_INTEL_BAYTRAIL)
/*
* IO Sideband Function
*/
@@ -394,7 +393,7 @@ CONFIG(SOC_INTEL_FSP_BAYTRAIL)
REG_SCRIPT_IOSF(POLL, unit_, reg_, mask_, value_, timeout_)
#define REG_IOSF_XOR(unit_, reg_, value_) \
REG_IOSF_RXW(unit_, reg_, 0xffffffff, value_)
-#endif /* CONFIG_SOC_INTEL_BAYTRAIL || CONFIG_SOC_INTEL_FSP_BAYTRAIL*/
+#endif /* CONFIG_SOC_INTEL_BAYTRAIL */
/*
* CPU Model Specific Register
diff --git a/src/lib/reg_script.c b/src/lib/reg_script.c
index 5f4fa9fa11..299fd75028 100644
--- a/src/lib/reg_script.c
+++ b/src/lib/reg_script.c
@@ -28,8 +28,7 @@
#include <cpu/x86/msr.h>
#endif
-#define HAS_IOSF (CONFIG(SOC_INTEL_BAYTRAIL) || \
- CONFIG(SOC_INTEL_FSP_BAYTRAIL))
+#define HAS_IOSF (CONFIG(SOC_INTEL_BAYTRAIL))
#if HAS_IOSF
#include <soc/iosf.h> /* TODO: wrap in <soc/reg_script.h, remove #ifdef? */
diff --git a/src/soc/intel/fsp_baytrail/Kconfig b/src/soc/intel/fsp_baytrail/Kconfig
deleted file mode 100644
index 5a8bec995b..0000000000
--- a/src/soc/intel/fsp_baytrail/Kconfig
+++ /dev/null
@@ -1,117 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
-## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-
-config SOC_INTEL_FSP_BAYTRAIL
- bool
- help
- Bay Trail I part support using the Intel FSP.
-
-if SOC_INTEL_FSP_BAYTRAIL
-
-config CPU_SPECIFIC_OPTIONS
- def_bool y
- select ACPI_INTEL_HARDWARE_SLEEP_VALUES
- select ARCH_BOOTBLOCK_X86_32
- select ARCH_VERSTAGE_X86_32
- select ARCH_ROMSTAGE_X86_32
- select ARCH_RAMSTAGE_X86_32
- select HAVE_SMI_HANDLER
- select SOUTHBRIDGE_INTEL_COMMON_RESET
- select NO_RELOCATABLE_RAMSTAGE
- select PARALLEL_MP
- select REG_SCRIPT
- select SMP
- select SPI_FLASH
- select SSE2
- select TSC_SYNC_MFENCE
- select UDELAY_TSC
- select TSC_MONOTONIC_TIMER
- select SUPPORT_CPU_UCODE_IN_CBFS
- select MICROCODE_BLOB_NOT_HOOKED_UP
- select INTEL_DESCRIPTOR_MODE_CAPABLE
- select HAVE_SPI_CONSOLE_SUPPORT
- select DRIVERS_I2C_DESIGNWARE
-
- # Microcode header files are delivered in FSP package
- select USES_MICROCODE_HEADER_FILES if HAVE_FSP_BIN
-
-config VBOOT
- select VBOOT_STARTS_IN_ROMSTAGE
-
-config SOC_INTEL_FSP_BAYTRAIL_MD
- bool
- default n
-
-config BOOTBLOCK_CPU_INIT
- string
- default "soc/intel/fsp_baytrail/bootblock/bootblock.c"
-
-config MMCONF_BASE_ADDRESS
- hex
- default 0xe0000000
-
-config MAX_CPUS
- int
- default 4
-
-config CPU_ADDR_BITS
- int
- default 36
-
-config SMM_TSEG_SIZE
- hex
- default 0x800000
- help
- This is set by the FSP
-
-config SMM_RESERVED_SIZE
- hex
- default 0x100000
-
-config VGA_BIOS_ID
- string
- default "8086,0f31"
- help
- This is the default PCI ID for the Bay Trail graphics
- devices. This string names the vbios ROM in cbfs.
-
-config ENABLE_BUILTIN_COM1
- bool "Enable built-in legacy Serial Port"
- help
- The Baytrail SOC has one legacy serial port. Choose this option to
- configure the pads and enable it. This serial port can be used for
- the debug console.
-
-config VGA_BIOS_FILE
- string
- default "../intel/cpu/baytrail/vbios/Vga.dat" if VGA_BIOS
-
-config CPU_MICROCODE_HEADER_FILES
- string
- default "../intel/cpu/baytrail/microcode/M0130673322.h ../intel/cpu/baytrail/microcode/M0130679901.h ../intel/cpu/baytrail/microcode/M0230672228.h"
-
-config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
- int
- default 133
-
-config SOC_INTEL_I2C_DEV_MAX
- int
- default 7
-
-## Baytrail Specific FSP Kconfig
-source src/soc/intel/fsp_baytrail/fsp/Kconfig
-
-endif #SOC_INTEL_FSP_BAYTRAIL
diff --git a/src/soc/intel/fsp_baytrail/Makefile.inc b/src/soc/intel/fsp_baytrail/Makefile.inc
deleted file mode 100644
index 0d89832f7d..0000000000
--- a/src/soc/intel/fsp_baytrail/Makefile.inc
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2010 Google Inc.
-# Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
-# Copyright (C) 2016-2019 Siemens AG
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-
-ifeq ($(CONFIG_SOC_INTEL_FSP_BAYTRAIL),y)
-
-subdirs-y += fsp
-subdirs-y += romstage
-subdirs-y += ../../../cpu/intel/microcode
-subdirs-y += ../../../cpu/intel/turbo
-subdirs-y += ../../../cpu/x86/cache
-subdirs-y += ../../../cpu/x86/lapic
-subdirs-y += ../../../cpu/x86/mtrr
-subdirs-y += ../../../cpu/x86/smm
-subdirs-y += ../../../cpu/x86/tsc
-subdirs-y += ../../../lib/fsp
-
-romstage-y += gpio.c
-romstage-y += iosf.c
-romstage-y += memmap.c
-romstage-y += pmutil.c
-romstage-y += spi.c
-romstage-y += tsc_freq.c
-romstage-y += i2c.c
-
-postcar-y += tsc_freq.c
-
-ramstage-y += acpi.c
-ramstage-y += chip.c
-ramstage-y += cpu.c
-ramstage-y += gfx.c
-ramstage-y += gpio.c
-ramstage-y += i2c.c
-ramstage-y += iosf.c
-ramstage-y += lpe.c
-ramstage-y += lpss.c
-ramstage-y += memmap.c
-ramstage-y += northcluster.c
-ramstage-y += pmutil.c
-ramstage-y += ramstage.c
-ramstage-y += southcluster.c
-ramstage-y += spi.c
-ramstage-y += tsc_freq.c
-ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smm.c
-
-smm-y += pmutil.c
-smm-y += smihandler.c
-smm-y += spi.c
-smm-y += tsc_freq.c
-
-# Remove as ramstage gets fleshed out
-ramstage-y += placeholders.c
-
-CPPFLAGS_common += -I$(src)/soc/intel/fsp_baytrail/include
-CPPFLAGS_common += -I$(src)/soc/intel/fsp_baytrail/fsp
-
-endif
diff --git a/src/soc/intel/fsp_baytrail/acpi.c b/src/soc/intel/fsp_baytrail/acpi.c
deleted file mode 100644
index 5efa82f3b7..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi.c
+++ /dev/null
@@ -1,577 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 coresystems GmbH
- * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <types.h>
-#include <console/console.h>
-#include <arch/acpi.h>
-#include <arch/acpigen.h>
-#include <arch/cpu.h>
-#include <cpu/x86/msr.h>
-#include <cpu/x86/smm.h>
-#include <cpu/intel/speedstep.h>
-#include <cpu/intel/turbo.h>
-#include <arch/smp/mpspec.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <soc/baytrail.h>
-#include <soc/pci_devs.h>
-#include <soc/acpi.h>
-#include <string.h>
-#include <soc/iomap.h>
-#include <soc/lpc.h>
-#include <soc/pmc.h>
-#include <soc/irq.h>
-#include <soc/iosf.h>
-#include <device/mmio.h>
-#include <device/pci_ops.h>
-#include <soc/msr.h>
-#include <soc/pattrs.h>
-#include <cbmem.h>
-#include <version.h>
-
-#include "chip.h"
-
-#define MWAIT_RES(state, sub_state) \
- { \
- .addrl = (((state) << 4) | (sub_state)), \
- .space_id = ACPI_ADDRESS_SPACE_FIXED, \
- .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, \
- .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, \
- .access_size = ACPI_FFIXEDHW_FLAG_HW_COORD, \
- }
-
-/* C-state map without S0ix */
-static acpi_cstate_t cstate_map[] = {
- {
- /* C1 */
- .ctype = 1, /* ACPI C1 */
- .latency = 1,
- .power = 1000,
- .resource = MWAIT_RES(0, 0),
- },
- {
- /* C6NS with no L2 shrink */
- /* NOTE: this substate is above CPUID limit */
- .ctype = 2, /* ACPI C2 */
- .latency = 500,
- .power = 10,
- .resource = MWAIT_RES(5, 1),
- },
- {
- /* C6FS with full L2 shrink */
- .ctype = 3, /* ACPI C3 */
- .latency = 1500, /* 1.5ms worst case */
- .power = 10,
- .resource = MWAIT_RES(5, 2),
- }
-};
-
-void acpi_init_gnvs(global_nvs_t *gnvs)
-{
- /* CPU core count */
- gnvs->pcnt = dev_count_cpu();
-
- /* Top of Low Memory (start of resource allocation) */
- gnvs->tolm = nc_read_top_of_low_memory();
-
-#if CONFIG(CONSOLE_CBMEM)
- /* Update the mem console pointer. */
- gnvs->cbmc = (u32)cbmem_find(CBMEM_ID_CONSOLE);
-#endif
-}
-
-static int acpi_sci_irq(void)
-{
- u32 *actl = (u32 *)(ILB_BASE_ADDRESS + ACTL);
- int scis;
- static int sci_irq;
-
- if (sci_irq)
- return sci_irq;
-
- /* Determine how SCI is routed. */
- scis = read32(actl) & SCIS_MASK;
- switch (scis) {
- case SCIS_IRQ9:
- case SCIS_IRQ10:
- case SCIS_IRQ11:
- sci_irq = scis - SCIS_IRQ9 + 9;
- break;
- case SCIS_IRQ20:
- case SCIS_IRQ21:
- case SCIS_IRQ22:
- case SCIS_IRQ23:
- sci_irq = scis - SCIS_IRQ20 + 20;
- break;
- default:
- printk(BIOS_DEBUG, "Invalid SCI route! Defaulting to IRQ9.\n");
- sci_irq = 9;
- break;
- }
-
- printk(BIOS_DEBUG, "SCI is IRQ%d\n", sci_irq);
- return sci_irq;
-}
-
-unsigned long acpi_fill_mcfg(unsigned long current)
-{
- current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)current,
- MCFG_BASE_ADDRESS, 0, 0, 255);
- return current;
-}
-
-/**
- * Fill in the fadt with generic values that can be overridden later.
- */
-
-typedef struct soc_intel_fsp_baytrail_config config_t;
-
-void acpi_fill_in_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
-{
- acpi_header_t *header = &(fadt->header);
- struct device *lpcdev = pcidev_path_on_root(PCH_DEVFN_LPC);
- u16 pmbase = pci_read_config16(lpcdev, ABASE) & 0xfff0;
- config_t *config = config_of(lpcdev);
-
- memset((void *) fadt, 0, sizeof(acpi_fadt_t));
-
- /*
- * Reference section 5.2.9 Fixed ACPI Description Table (FADT)
- * in the ACPI 3.0b specification.
- */
-
- /* FADT Header Structure */
- memcpy(header->signature, "FACP", 4);
- header->length = sizeof(acpi_fadt_t);
- header->revision = get_acpi_table_revision(FADT);
- memcpy(header->oem_id, OEM_ID, 6);
- memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
- memcpy(header->asl_compiler_id, ASLC, 4);
- header->asl_compiler_revision = asl_revision;
-
- /* ACPI Pointers */
- fadt->firmware_ctrl = (unsigned long) facs;
- fadt->dsdt = (unsigned long) dsdt;
-
- fadt->reserved = 0; /* reserved, should be 0 ACPI 3.0 */
- fadt->preferred_pm_profile = config->fadt_pm_profile; /* unknown is default */
-
- /* System Management */
- fadt->sci_int = acpi_sci_irq();
-
- fadt->smi_cmd = APM_CNT;
- fadt->acpi_enable = APM_CNT_ACPI_ENABLE;
- fadt->acpi_disable = APM_CNT_ACPI_DISABLE;
-
- /* Power Control */
- fadt->s4bios_req = 0x00;
- fadt->pstate_cnt = 0x00;
-
- /* Control Registers - Base Address */
- fadt->pm1a_evt_blk = pmbase + PM1_STS;
- fadt->pm1b_evt_blk = 0x00; /* Not Used */
- fadt->pm1a_cnt_blk = pmbase + PM1_CNT;
- fadt->pm1b_cnt_blk = 0x00; /* Not Used */
- fadt->pm2_cnt_blk = pmbase + PM2A_CNT_BLK;
- fadt->pm_tmr_blk = pmbase + PM1_TMR;
- fadt->gpe0_blk = pmbase + GPE0_STS;
- fadt->gpe1_blk = 0x00; /* Not Used */
-
- /* Control Registers - Length */
- fadt->pm1_evt_len = 4; /* 32 bits */
- fadt->pm1_cnt_len = 2; /* 32 bit register, 16 bits used */
- fadt->pm2_cnt_len = 1; /* 8 bits */
- fadt->pm_tmr_len = 4; /* 32 bits */
- fadt->gpe0_blk_len = 8; /* 64 bits */
- fadt->gpe1_blk_len = 0;
- fadt->gpe1_base = 0;
- fadt->cst_cnt = 0;
- fadt->p_lvl2_lat = ACPI_FADT_C2_NOT_SUPPORTED;
- fadt->p_lvl3_lat = ACPI_FADT_C3_NOT_SUPPORTED;
- fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */
- fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */
- fadt->duty_offset = 1;
- fadt->duty_width = 0;
-
- /* RTC Registers */
- fadt->day_alrm = 0x0D;
- fadt->mon_alrm = 0x00;
- fadt->century = 0x00;
- fadt->iapc_boot_arch = config->fadt_boot_arch; /* legacy free default */
-
- fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
- ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
- ACPI_FADT_RESET_REGISTER | ACPI_FADT_SLEEP_TYPE |
- ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
-
- /* Reset Register */
- fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->reset_reg.bit_width = 8;
- fadt->reset_reg.bit_offset = 0;
- fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
- fadt->reset_reg.addrl = 0xCF9;
- fadt->reset_reg.addrh = 0x00;
- fadt->reset_value = 6;
-
- fadt->ARM_boot_arch = 0; /* MUST be 0 ACPI 3.0 */
- fadt->FADT_MinorVersion = 0; /* MUST be 0 ACPI 3.0 */
-
- /* Extended ACPI Pointers */
- fadt->x_firmware_ctl_l = (unsigned long)facs;
- fadt->x_firmware_ctl_h = 0x00;
- fadt->x_dsdt_l = (unsigned long)dsdt;
- fadt->x_dsdt_h = 0x00;
-
- /* PM1 Status & PM1 Enable */
- fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm1a_evt_blk.bit_width = 32;
- fadt->x_pm1a_evt_blk.bit_offset = 0;
- fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
- fadt->x_pm1a_evt_blk.addrl = fadt->pm1a_evt_blk;
- fadt->x_pm1a_evt_blk.addrh = 0x00;
-
- fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm1b_evt_blk.bit_width = 0;
- fadt->x_pm1b_evt_blk.bit_offset = 0;
- fadt->x_pm1b_evt_blk.access_size = 0;
- fadt->x_pm1b_evt_blk.addrl = fadt->pm1b_evt_blk;
- fadt->x_pm1b_evt_blk.addrh = 0x00;
-
- /* PM1 Control Registers */
- fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm1a_cnt_blk.bit_width = 16;
- fadt->x_pm1a_cnt_blk.bit_offset = 0;
- fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS;
- fadt->x_pm1a_cnt_blk.addrl = fadt->pm1a_cnt_blk;
- fadt->x_pm1a_cnt_blk.addrh = 0x00;
-
- fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm1b_cnt_blk.bit_width = 0;
- fadt->x_pm1b_cnt_blk.bit_offset = 0;
- fadt->x_pm1b_cnt_blk.access_size = 0;
- fadt->x_pm1b_cnt_blk.addrl = fadt->pm1b_cnt_blk;
- fadt->x_pm1b_cnt_blk.addrh = 0x00;
-
- /* PM2 Control Registers */
- fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm2_cnt_blk.bit_width = 8;
- fadt->x_pm2_cnt_blk.bit_offset = 0;
- fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
- fadt->x_pm2_cnt_blk.addrl = fadt->pm2_cnt_blk;
- fadt->x_pm2_cnt_blk.addrh = 0x00;
-
- /* PM1 Timer Register */
- fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_pm_tmr_blk.bit_width = 32;
- fadt->x_pm_tmr_blk.bit_offset = 0;
- fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
- fadt->x_pm_tmr_blk.addrl = fadt->pm_tmr_blk;
- fadt->x_pm_tmr_blk.addrh = 0x00;
-
- /* General-Purpose Event Registers */
- fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_gpe0_blk.bit_width = 64; /* EventStatus + EventEnable */
- fadt->x_gpe0_blk.bit_offset = 0;
- fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
- fadt->x_gpe0_blk.addrl = fadt->gpe0_blk;
- fadt->x_gpe0_blk.addrh = 0x00;
-
- fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO;
- fadt->x_gpe1_blk.bit_width = 0;
- fadt->x_gpe1_blk.bit_offset = 0;
- fadt->x_gpe1_blk.access_size = 0;
- fadt->x_gpe1_blk.addrl = fadt->gpe1_blk;
- fadt->x_gpe1_blk.addrh = 0x00;
-
- header->checksum =
- acpi_checksum((void *) fadt, sizeof(acpi_fadt_t));
-}
-static acpi_tstate_t baytrail_tss_table[] = {
- { 100, 1000, 0, 0x00, 0 },
- { 88, 875, 0, 0x1e, 0 },
- { 75, 750, 0, 0x1c, 0 },
- { 63, 625, 0, 0x1a, 0 },
- { 50, 500, 0, 0x18, 0 },
- { 38, 375, 0, 0x16, 0 },
- { 25, 250, 0, 0x14, 0 },
- { 13, 125, 0, 0x12, 0 },
-};
-
-static void generate_T_state_entries(int core, int cores_per_package)
-{
- /* Indicate SW_ALL coordination for T-states */
- acpigen_write_TSD_package(core, cores_per_package, SW_ALL);
-
- /* Indicate FFixedHW so OS will use MSR */
- acpigen_write_empty_PTC();
-
- /* Set NVS controlled T-state limit */
- acpigen_write_TPC("\\TLVL");
-
- /* Write TSS table for MSR access */
- acpigen_write_TSS_package(
- ARRAY_SIZE(baytrail_tss_table), baytrail_tss_table);
-}
-
-static int calculate_power(int tdp, int p1_ratio, int ratio)
-{
- u32 m;
- u32 power;
-
- /*
- * M = ((1.1 - ((p1_ratio - ratio) * 0.00625)) / 1.1) ^ 2
- *
- * Power = (ratio / p1_ratio) * m * tdp
- */
-
- m = (110000 - ((p1_ratio - ratio) * 625)) / 11;
- m = (m * m) / 1000;
-
- power = ((ratio * 100000 / p1_ratio) / 100);
- power *= (m / 100) * (tdp / 1000);
- power /= 1000;
-
- return (int)power;
-}
-
-static void generate_P_state_entries(int core, int cores_per_package)
-{
- int ratio_min, ratio_max, ratio_turbo, ratio_step, ratio_range_2;
- int coord_type, power_max, power_unit, num_entries;
- int ratio, power, clock, clock_max;
- int vid, vid_turbo, vid_min, vid_max, vid_range_2;
- u32 control_status;
- const struct pattrs *pattrs = pattrs_get();
- msr_t msr;
-
- /* Inputs from CPU attributes */
- ratio_max = pattrs->iacore_ratios[IACORE_MAX];
- ratio_min = pattrs->iacore_ratios[IACORE_LFM];
- vid_max = pattrs->iacore_vids[IACORE_MAX];
- vid_min = pattrs->iacore_vids[IACORE_LFM];
-
- /* Hardware coordination of P-states */
- coord_type = HW_ALL;
-
- /* Max Non-Turbo Frequency */
- clock_max = (ratio_max * pattrs->bclk_khz) / 1000;
-
- /* Calculate CPU TDP in mW */
- msr = rdmsr(MSR_PKG_POWER_SKU_UNIT);
- power_unit = 1 << (msr.lo & 0xf);
- msr = rdmsr(MSR_PKG_POWER_LIMIT);
- power_max = ((msr.lo & 0x7fff) / power_unit) * 1000;
-
- /* Write _PCT indicating use of FFixedHW */
- acpigen_write_empty_PCT();
-
- /* Write _PPC with NVS specified limit on supported P-state */
- acpigen_write_PPC_NVS();
-
- /* Write PSD indicating configured coordination type */
- acpigen_write_PSD_package(core, 1, coord_type);
-
- /* Add P-state entries in _PSS table */
- acpigen_write_name("_PSS");
-
- /* Determine ratio points */
- ratio_step = 1;
- num_entries = (ratio_max - ratio_min) / ratio_step;
- while (num_entries > 15) { /* ACPI max is 15 ratios */
- ratio_step <<= 1;
- num_entries >>= 1;
- }
-
- /* P[T] is Turbo state if enabled */
- if (get_turbo_state() == TURBO_ENABLED) {
- /* _PSS package count including Turbo */
- acpigen_write_package(num_entries + 2);
-
- ratio_turbo = pattrs->iacore_ratios[IACORE_TURBO];
- vid_turbo = pattrs->iacore_vids[IACORE_TURBO];
- control_status = (ratio_turbo << 8) | vid_turbo;
-
- /* Add entry for Turbo ratio */
- acpigen_write_PSS_package(
- clock_max + 1, /*MHz*/
- power_max, /*mW*/
- 10, /*lat1*/
- 10, /*lat2*/
- control_status, /*control*/
- control_status); /*status*/
- } else {
- /* _PSS package count without Turbo */
- acpigen_write_package(num_entries + 1);
- ratio_turbo = ratio_max;
- vid_turbo = vid_max;
- }
-
- /* First regular entry is max non-turbo ratio */
- control_status = (ratio_max << 8) | vid_max;
- acpigen_write_PSS_package(
- clock_max, /*MHz*/
- power_max, /*mW*/
- 10, /*lat1*/
- 10, /*lat2*/
- control_status, /*control */
- control_status); /*status*/
-
- /* Set up ratio and vid ranges for VID calculation */
- ratio_range_2 = (ratio_turbo - ratio_min) * 2;
- vid_range_2 = (vid_turbo - vid_min) * 2;
-
- /* Generate the remaining entries */
- for (ratio = ratio_min + ((num_entries - 1) * ratio_step);
- ratio >= ratio_min; ratio -= ratio_step) {
-
- /* Calculate VID for this ratio */
- vid = ((ratio - ratio_min) * vid_range_2) /
- ratio_range_2 + vid_min;
- /* Round up if remainder */
- if (((ratio - ratio_min) * vid_range_2) % ratio_range_2)
- vid++;
-
- /* Calculate power at this ratio */
- power = calculate_power(power_max, ratio_max, ratio);
- clock = (ratio * pattrs->bclk_khz) / 1000;
- control_status = (ratio << 8) | (vid & 0xff);
-
- acpigen_write_PSS_package(
- clock, /*MHz*/
- power, /*mW*/
- 10, /*lat1*/
- 10, /*lat2*/
- control_status, /*control*/
- control_status); /*status*/
- }
-
- /* Fix package length */
- acpigen_pop_len();
-}
-
-void generate_cpu_entries(struct device *device)
-{
- int core;
- int pcontrol_blk = get_pmbase(), plen = 6;
- const struct pattrs *pattrs = pattrs_get();
-
- for (core=0; core<pattrs->num_cpus; core++) {
- if (core > 0) {
- pcontrol_blk = 0;
- plen = 0;
- }
-
- /* Generate processor \_PR.CPUx */
- acpigen_write_processor(
- core, pcontrol_blk, plen);
-
- /* Generate P-state tables */
- generate_P_state_entries(
- core, pattrs->num_cpus);
-
- /* Generate C-state tables */
- acpigen_write_CST_package(
- cstate_map, ARRAY_SIZE(cstate_map));
-
- /* Generate T-state tables */
- generate_T_state_entries(
- core, pattrs->num_cpus);
-
- acpigen_pop_len();
- }
-
- /* PPKG is usually used for thermal management
- of the first and only package. */
- acpigen_write_processor_package("PPKG", 0, pattrs->num_cpus);
-
- /* Add a method to notify processor nodes */
- acpigen_write_processor_cnot(pattrs->num_cpus);
-}
-
-unsigned long acpi_madt_irq_overrides(unsigned long current)
-{
- int sci_irq = acpi_sci_irq();
- acpi_madt_irqoverride_t *irqovr;
- uint16_t sci_flags = MP_IRQ_TRIGGER_LEVEL;
-
- /* INT_SRC_OVR */
- irqovr = (void *)current;
- current += acpi_create_madt_irqoverride(irqovr, 0, 0, 2, 0);
-
- if (sci_irq >= 20)
- sci_flags |= MP_IRQ_POLARITY_LOW;
- else
- sci_flags |= MP_IRQ_POLARITY_HIGH;
-
- irqovr = (void *)current;
- current += acpi_create_madt_irqoverride(irqovr, 0, sci_irq, sci_irq,
- sci_flags);
-
- return current;
-}
-
-unsigned long southcluster_write_acpi_tables(struct device *device,
- unsigned long current,
- struct acpi_rsdp *rsdp)
-{
- acpi_header_t *ssdt2;
-
- current = acpi_write_hpet(device, current, rsdp);
- current = acpi_align_current(current);
-
- ssdt2 = (acpi_header_t *)current;
- memset(ssdt2, 0, sizeof(acpi_header_t));
- acpi_create_serialio_ssdt(ssdt2);
- if (ssdt2->length) {
- current += ssdt2->length;
- acpi_add_table(rsdp, ssdt2);
- printk(BIOS_DEBUG, "ACPI: * SSDT2 @ %p Length %x\n",ssdt2,
- ssdt2->length);
- current = acpi_align_current(current);
- } else {
- ssdt2 = NULL;
- printk(BIOS_DEBUG, "ACPI: * SSDT2 not generated.\n");
- }
-
- printk(BIOS_DEBUG, "current = %lx\n", current);
-
- return current;
-}
-
-void southcluster_inject_dsdt(struct device *device)
-{
- global_nvs_t *gnvs;
-
- gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS);
- if (!gnvs) {
- gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof (*gnvs));
- if (gnvs)
- memset(gnvs, 0, sizeof(*gnvs));
- }
-
- if (gnvs) {
- acpi_create_gnvs(gnvs);
- /* And tell SMI about it */
- smm_setup_structures(gnvs, NULL, NULL);
-
- /* Add it to DSDT. */
- acpigen_write_scope("\\");
- acpigen_write_name_dword("NVSA", (u32) gnvs);
- acpigen_pop_len();
- }
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/device_nvs.asl b/src/soc/intel/fsp_baytrail/acpi/device_nvs.asl
deleted file mode 100644
index 54978cd2c0..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/device_nvs.asl
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Device Enabled in ACPI Mode */
-
-S0EN, 8, // SDMA Enable
-S1EN, 8, // I2C1 Enable
-S2EN, 8, // I2C2 Enable
-S3EN, 8, // I2C3 Enable
-S4EN, 8, // I2C4 Enable
-S5EN, 8, // I2C5 Enable
-S6EN, 8, // I2C6 Enable
-S7EN, 8, // I2C7 Enable
-S8EN, 8, // SDMA2 Enable
-S9EN, 8, // SPI Enable
-SAEN, 8, // PWM1 Enable
-SBEN, 8, // PWM2 Enable
-SCEN, 8, // UART2 Enable
-SDEN, 8, // UART2 Enable
-C0EN, 8, // MMC Enable
-C1EN, 8, // SDIO Enable
-C2EN, 8, // SD Card Enable
-LPEN, 8, // LPE Enable
-
-/* BAR 0 */
-
-S0B0, 32, // SDMA BAR0
-S1B0, 32, // I2C1 BAR0
-S2B0, 32, // I2C2 BAR0
-S3B0, 32, // I2C3 BAR0
-S4B0, 32, // I2C4 BAR0
-S5B0, 32, // I2C5 BAR0
-S6B0, 32, // I2C6 BAR0
-S7B0, 32, // I2C7 BAR0
-S8B0, 32, // SDMA2 BAR0
-S9B0, 32, // SPI BAR0
-SAB0, 32, // PWM1 BAR0
-SBB0, 32, // PWM2 BAR0
-SCB0, 32, // UART1 BAR0
-SDB0, 32, // UART2 BAR0
-C0B0, 32, // MMC BAR0
-C1B0, 32, // SDIO BAR0
-C2B0, 32, // SD Card BAR0
-LPB0, 32, // LPE BAR0
-
-/* BAR 1 */
-
-S0B1, 32, // SDMA BAR1
-S1B1, 32, // I2C1 BAR1
-S2B1, 32, // I2C2 BAR1
-S3B1, 32, // I2C3 BAR1
-S4B1, 32, // I2C4 BAR1
-S5B1, 32, // I2C5 BAR1
-S6B1, 32, // I2C6 BAR1
-S7B1, 32, // I2C7 BAR1
-S8B1, 32, // SDMA2 BAR1
-S9B1, 32, // SPI BAR1
-SAB1, 32, // PWM1 BAR1
-SBB1, 32, // PWM2 BAR1
-SCB1, 32, // UART1 BAR1
-SDB1, 32, // UART2 BAR1
-C0B1, 32, // MMC BAR1
-C1B1, 32, // SDIO BAR1
-C2B1, 32, // SD Card BAR1
-LPB1, 32, // LPE BAR1
-
-/* Extra */
-
-LPFW, 32, // LPE BAR2 Firmware
diff --git a/src/soc/intel/fsp_baytrail/acpi/globalnvs.asl b/src/soc/intel/fsp_baytrail/acpi/globalnvs.asl
deleted file mode 100644
index c4d91a3c16..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/globalnvs.asl
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Global Variables */
-
-Name(\PICM, 0) // IOAPIC/8259
-
-/* Global ACPI memory region. This region is used for passing information
- * between coreboot (aka "the system bios"), ACPI, and the SMI handler.
- * Since we don't know where this will end up in memory at ACPI compile time,
- * we have to fix it up in coreboot's ACPI creation phase.
- */
-
-
-External(NVSA)
-OperationRegion (GNVS, SystemMemory, NVSA, 0x2000)
-Field (GNVS, ByteAcc, NoLock, Preserve)
-{
- /* Miscellaneous */
- Offset (0x00),
- OSYS, 16, // 0x00 - Operating System
- SMIF, 8, // 0x02 - SMI function
- PRM0, 8, // 0x03 - SMI function parameter
- PRM1, 8, // 0x04 - SMI function parameter
- SCIF, 8, // 0x05 - SCI function
- PRM2, 8, // 0x06 - SCI function parameter
- PRM3, 8, // 0x07 - SCI function parameter
- LCKF, 8, // 0x08 - Global Lock function for EC
- PRM4, 8, // 0x09 - Lock function parameter
- PRM5, 8, // 0x0a - Lock function parameter
- P80D, 32, // 0x0b - Debug port (IO 0x80) value
- LIDS, 8, // 0x0f - LID state (open = 1)
- PWRS, 8, // 0x10 - Power State (AC = 1)
- PCNT, 8, // 0x11 - Processor count
- TPMP, 8, // 0x12 - TPM Present and Enabled
- TLVL, 8, // 0x13 - Throttle Level
- PPCM, 8, // 0x14 - Maximum P-state usable by OS
-
- /* Device Config */
- Offset (0x20),
- S5U0, 8, // 0x20 - Enable USB0 in S5
- S5U1, 8, // 0x21 - Enable USB1 in S5
- S3U0, 8, // 0x22 - Enable USB0 in S3
- S3U1, 8, // 0x23 - Enable USB1 in S3
- TACT, 8, // 0x24 - Thermal Active trip point
- TPSV, 8, // 0x25 - Thermal Passive trip point
- TCRT, 8, // 0x26 - Thermal Critical trip point
- DPTE, 8, // 0x27 - Enable DPTF
-
- /* Base addresses */
- Offset (0x30),
- CMEM, 32, // 0x30 - CBMEM TOC
- TOLM, 32, // 0x34 - Top of Low Memory
- CBMC, 32, // 0x38 - coreboot mem console pointer
-
- Offset (0x1000),
- #include <soc/intel/fsp_baytrail/acpi/device_nvs.asl>
-}
-
-/* Set flag to enable USB charging in S3 */
-Method (S3UE)
-{
- Store (One, \S3U0)
- Store (One, \S3U1)
-}
-
-/* Set flag to disable USB charging in S3 */
-Method (S3UD)
-{
- Store (Zero, \S3U0)
- Store (Zero, \S3U1)
-}
-
-/* Set flag to enable USB charging in S5 */
-Method (S5UE)
-{
- Store (One, \S5U0)
- Store (One, \S5U1)
-}
-
-/* Set flag to disable USB charging in S5 */
-Method (S5UD)
-{
- Store (Zero, \S5U0)
- Store (Zero, \S5U1)
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/gpio.asl b/src/soc/intel/fsp_baytrail/acpi/gpio.asl
deleted file mode 100644
index d0e9be5366..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/gpio.asl
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <soc/intel/fsp_baytrail/include/soc/iomap.h>
-#include <soc/intel/fsp_baytrail/include/soc/irq.h>
-
-/* SouthCluster GPIO */
-Device (GPSC)
-{
- Name (_HID, "INT33FC")
- Name (_CID, "INT33FC")
- Name (_UID, 1)
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, RMEM)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,,)
- {
- GPIO_SC_IRQ
- }
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^RMEM._BAS, RBAS)
- Add (IO_BASE_ADDRESS, IO_BASE_OFFSET_GPSCORE, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- Return (0xF)
- }
-}
-
-/* NorthCluster GPIO */
-Device (GPNC)
-{
- Name (_HID, "INT33FC")
- Name (_CID, "INT33FC")
- Name (_UID, 2)
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, RMEM)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,,)
- {
- GPIO_NC_IRQ
- }
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^RMEM._BAS, RBAS)
- Add (IO_BASE_ADDRESS, IO_BASE_OFFSET_GPNCORE, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- Return (0xF)
- }
-}
-
-/* SUS GPIO */
-Device (GPSS)
-{
- Name (_HID, "INT33FC")
- Name (_CID, "INT33FC")
- Name (_UID, 3)
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, RMEM)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,,)
- {
- GPIO_SUS_IRQ
- }
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^RMEM._BAS, RBAS)
- Add (IO_BASE_ADDRESS, IO_BASE_OFFSET_GPSSUS, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- Return (0xF)
- }
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/irq_helper.h b/src/soc/intel/fsp_baytrail/acpi/irq_helper.h
deleted file mode 100644
index 8d18aeaeb3..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/irq_helper.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2014 Sage Electronics Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-
-/*
- * This file intentionally gets included multiple times, to set pic and apic
- * modes, so should not have guard statements added.
- */
-
-/*
- * This file will use arch/x86/acpi/irqroute.asl and mainboard/irqroute.h
- * to generate the ACPI IRQ routing for the mainboard being compiled.
- * This method uses #defines in irqroute.h along with the macros contained
- * in this file to generate an IRQ routing for each PCI device in the system.
- */
-
-#undef PCI_DEV_PIRQ_ROUTES
-#undef ACPI_DEV_IRQ
-#undef PCI_DEV_PIRQ_ROUTE
-#undef PIRQ_PIC_ROUTES
-#undef PIRQ_PIC
-#undef IRQROUTE_H
-#undef ROOTPORT_METHODS
-#undef RP_METHOD
-#undef ROOTPORT_IRQ_ROUTES
-#undef RP_IRQ_ROUTES
-
-#if defined(PIC_MODE)
-
-#define ACPI_DEV_IRQ(dev_, pin_, pin_name_) \
- Package() { ## dev_ ## ffff, pin_, \_SB.PCI0.LPCB.LNK ## pin_name_, 0 }
-
-#define RP_IRQ_ROUTES(prefix_, func_, a_, b_, c_, d_) \
-Name(prefix_ ## func_ ## P, Package() \
-{ \
- ACPI_DEV_IRQ(0x0000, 0, a_), \
- ACPI_DEV_IRQ(0x0000, 1, b_), \
- ACPI_DEV_IRQ(0x0000, 2, c_), \
- ACPI_DEV_IRQ(0x0000, 3, d_), \
-})
-
-/* define as blank so ROOTPORT_METHODS only gets inserted once */
-#define ROOTPORT_METHODS(prefix_, dev_)
-
-#else /* defined(PIC_MODE) */
-
-#define ACPI_DEV_IRQ(dev_, pin_, pin_name_) \
- Package() { ## dev_ ## ffff, pin_, 0, PIRQ ## pin_name_ ## _APIC_IRQ }
-
-#define RP_IRQ_ROUTES(prefix_, func_, a_, b_, c_, d_) \
-Name(prefix_ ## func_ ## A, Package() \
-{ \
- ACPI_DEV_IRQ(0x0000, 0, a_), \
- ACPI_DEV_IRQ(0x0000, 1, b_), \
- ACPI_DEV_IRQ(0x0000, 2, c_), \
- ACPI_DEV_IRQ(0x0000, 3, d_), \
-})
-
-#define ROOTPORT_METHODS(prefix_, dev_) \
- RP_METHOD(prefix_, dev_, 0) \
- RP_METHOD(prefix_, dev_, 1) \
- RP_METHOD(prefix_, dev_, 2) \
- RP_METHOD(prefix_, dev_, 3) \
- RP_METHOD(prefix_, dev_, 4) \
- RP_METHOD(prefix_, dev_, 5) \
- RP_METHOD(prefix_, dev_, 6) \
- RP_METHOD(prefix_, dev_, 7)
-
-#endif /* defined(PIC_MODE) */
-
-#define PCI_DEV_PIRQ_ROUTE(dev_, a_, b_, c_, d_) \
- ACPI_DEV_IRQ(dev_, 0, a_), \
- ACPI_DEV_IRQ(dev_, 1, b_), \
- ACPI_DEV_IRQ(dev_, 2, c_), \
- ACPI_DEV_IRQ(dev_, 3, d_)
-
-#define PCIE_BRIDGE_DEV(prefix_, dev_, a_, b_, c_, d_) \
- ROOTPORT_IRQ_ROUTES(prefix_, a_, b_, c_, d_) \
- ROOTPORT_METHODS(prefix_, dev_)
-
-#define ROOTPORT_IRQ_ROUTES(prefix_, a_, b_, c_, d_) \
- RP_IRQ_ROUTES(prefix_, 0, a_, b_, c_, d_) \
- RP_IRQ_ROUTES(prefix_, 1, b_, c_, d_, a_) \
- RP_IRQ_ROUTES(prefix_, 2, c_, d_, a_, b_) \
- RP_IRQ_ROUTES(prefix_, 3, d_, a_, b_, c_) \
- RP_IRQ_ROUTES(prefix_, 4, a_, b_, c_, d_) \
- RP_IRQ_ROUTES(prefix_, 5, b_, c_, d_, a_) \
- RP_IRQ_ROUTES(prefix_, 6, c_, d_, a_, b_) \
- RP_IRQ_ROUTES(prefix_, 7, d_, a_, b_, c_)
-
-#define RP_METHOD(prefix_, dev_, func_)\
-Device(prefix_ ## 0 ## func_) \
-{ \
- Name(_ADR, dev_ ## 000 ## func_) \
- Name(_PRW, Package() { \
- 0, 0 \
- }) \
- Method(_PRT,0) { \
- If(PICM) { \
- Return (prefix_ ## func_ ## A) \
- } Else { \
- Return (prefix_ ## func_ ## P) \
- } \
- } \
-}
-
-/* Empty PIRQ_PIC definition. */
-#define PIRQ_PIC(pirq_, pic_irq_)
-
-/* Include the mainboard irq route definition */
-#include "irqroute.h"
diff --git a/src/soc/intel/fsp_baytrail/acpi/irqlinks.asl b/src/soc/intel/fsp_baytrail/acpi/irqlinks.asl
deleted file mode 100644
index 2d029242d8..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/irqlinks.asl
+++ /dev/null
@@ -1,487 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Device (LNKA)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 1)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTA)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLA, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLA, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTA
- ShiftLeft(1, And(PRTA, 0x0f), IRQ0)
-
- Return (RTLA)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTA)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTA, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKB)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 2)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTB)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLB, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLB, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTB
- ShiftLeft(1, And(PRTB, 0x0f), IRQ0)
-
- Return (RTLB)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTB)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTB, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKC)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 3)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTC)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLC, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLC, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTC
- ShiftLeft(1, And(PRTC, 0x0f), IRQ0)
-
- Return (RTLC)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTC)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTC, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKD)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 4)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTD)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLD, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLD, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTD
- ShiftLeft(1, And(PRTD, 0x0f), IRQ0)
-
- Return (RTLD)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTD)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTD, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKE)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 5)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTE)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLE, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLE, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTE
- ShiftLeft(1, And(PRTE, 0x0f), IRQ0)
-
- Return (RTLE)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTE)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTE, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKF)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 6)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTF)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLF, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLF, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTF
- ShiftLeft(1, And(PRTF, 0x0f), IRQ0)
-
- Return (RTLF)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTF)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTF, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKG)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 7)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTG)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLG, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLG, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTG
- ShiftLeft(1, And(PRTG, 0x0f), IRQ0)
-
- Return (RTLG)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTG)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTG, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKH)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 8)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTH)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLH, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLH, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTH
- ShiftLeft(1, And(PRTH, 0x0f), IRQ0)
-
- Return (RTLH)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTH)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTH, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/irqroute.asl b/src/soc/intel/fsp_baytrail/acpi/irqroute.asl
deleted file mode 100644
index 4f3a744ff5..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/irqroute.asl
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-// PCI Interrupt Routing
-Method(_PRT)
-{
- /*
- * PICM comes from _PIC, which returns the following:
- * 0 - PIC mode
- * 1 - APIC mode
- * 2 - SAPIC mode
- */
- If (PICM) {
- Return (Package() {
- #undef PIC_MODE
- #include "irq_helper.h"
- PCI_DEV_PIRQ_ROUTES
- })
- } Else {
- Return (Package() {
- #define PIC_MODE
- #include "irq_helper.h"
- PCI_DEV_PIRQ_ROUTES
- })
- }
-
-}
-
-PCIE_BRIDGE_IRQ_ROUTES
-#undef PIC_MODE
-#include "irq_helper.h"
-PCIE_BRIDGE_IRQ_ROUTES
diff --git a/src/soc/intel/fsp_baytrail/acpi/lpc.asl b/src/soc/intel/fsp_baytrail/acpi/lpc.asl
deleted file mode 100644
index 7cdf1aa5d0..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/lpc.asl
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-// Intel LPC Bus Device - 0:1f.0
-
-Device (LPCB)
-{
- Name(_ADR, 0x001f0000)
-
- #include "irqlinks.asl"
-
- #include "acpi/ec.asl"
-
- Device (DMAC) // DMA Controller
- {
- Name(_HID, EISAID("PNP0200"))
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x00, 0x00, 0x01, 0x20)
- IO (Decode16, 0x81, 0x81, 0x01, 0x11)
- IO (Decode16, 0x93, 0x93, 0x01, 0x0d)
- IO (Decode16, 0xc0, 0xc0, 0x01, 0x20)
- DMA (Compatibility, NotBusMaster, Transfer8_16) { 4 }
- })
- }
-
- Device (FWH) // Firmware Hub
- {
- Name (_HID, EISAID("INT0800"))
- Name (_CRS, ResourceTemplate()
- {
- Memory32Fixed(ReadOnly, 0xff000000, 0x01000000)
- })
- }
-
- Device (HPET)
- {
- Name (_HID, EISAID("PNP0103"))
- Name (_CID, 0x010CD041)
-
- Method (_STA, 0) // Device Status
- {
- Return (0xf) // Enable and show device
- }
-
- Name(_CRS, ResourceTemplate()
- {
- Memory32Fixed(ReadOnly, CONFIG_HPET_ADDRESS, 0x400)
- })
- }
-
- Device(PIC) // 8259 Interrupt Controller
- {
- Name(_HID,EISAID("PNP0000"))
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x20, 0x20, 0x01, 0x02)
- IO (Decode16, 0x24, 0x24, 0x01, 0x02)
- IO (Decode16, 0x28, 0x28, 0x01, 0x02)
- IO (Decode16, 0x2c, 0x2c, 0x01, 0x02)
- IO (Decode16, 0x30, 0x30, 0x01, 0x02)
- IO (Decode16, 0x34, 0x34, 0x01, 0x02)
- IO (Decode16, 0x38, 0x38, 0x01, 0x02)
- IO (Decode16, 0x3c, 0x3c, 0x01, 0x02)
- IO (Decode16, 0xa0, 0xa0, 0x01, 0x02)
- IO (Decode16, 0xa4, 0xa4, 0x01, 0x02)
- IO (Decode16, 0xa8, 0xa8, 0x01, 0x02)
- IO (Decode16, 0xac, 0xac, 0x01, 0x02)
- IO (Decode16, 0xb0, 0xb0, 0x01, 0x02)
- IO (Decode16, 0xb4, 0xb4, 0x01, 0x02)
- IO (Decode16, 0xb8, 0xb8, 0x01, 0x02)
- IO (Decode16, 0xbc, 0xbc, 0x01, 0x02)
- IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02)
- IRQNoFlags () { 2 }
- })
- }
-
- Device(LDRC) // LPC device: Resource consumption
- {
- Name (_HID, EISAID("PNP0C02"))
- Name (_UID, 2)
-
- Name (RBUF, ResourceTemplate()
- {
- IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status
- IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post
- IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI
- })
-
- Method (_CRS, 0, NotSerialized)
- {
- Return (RBUF)
- }
- }
-
- Device (RTC) // Real Time Clock
- {
- Name (_HID, EISAID("PNP0B00"))
- Name (_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x70, 0x70, 1, 8)
-// Disable as Windows doesn't like it, and systems don't seem to use it.
-// IRQNoFlags() { 8 }
- })
- }
-
- Device (TIMR) // Intel 8254 timer
- {
- Name(_HID, EISAID("PNP0100"))
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x40, 0x40, 0x01, 0x04)
- IO (Decode16, 0x50, 0x50, 0x10, 0x04)
- IRQNoFlags() {0}
- })
- }
-
- // Include mainboard's superio.asl file.
- #include "acpi/superio.asl"
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/lpe.asl b/src/soc/intel/fsp_baytrail/acpi/lpe.asl
deleted file mode 100644
index d1dbd3a4b2..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/lpe.asl
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Device (LPEA)
-{
- Name (_HID, "80860F28")
- Name (_CID, "80860F28")
- Name (_UID, 1)
- Name (_DDN, "Low Power Audio Controller")
- Name (_PR0, Package () { PLPE })
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x00200000, BAR0)
- Memory32Fixed (ReadWrite, 0, 0x00001000, BAR1)
- Memory32Fixed (ReadWrite, 0, 0x00100000, BAR2)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPE_DMA0_IRQ
- }
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPE_DMA1_IRQ
- }
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPE_SSP0_IRQ
- }
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPE_SSP1_IRQ
- }
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPE_SSP2_IRQ
- }
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPE_IPC2HOST_IRQ
- }
- })
-
- Method (_CRS)
- {
- /* Update BAR0 from NVS */
- CreateDwordField (^RBUF, ^BAR0._BAS, BAS0)
- Store (\LPB0, BAS0)
-
- /* Update BAR1 from NVS */
- CreateDwordField (^RBUF, ^BAR1._BAS, BAS1)
- Store (\LPB1, BAS1)
-
- /* Update LPE FW from NVS */
- CreateDwordField (^RBUF, ^BAR2._BAS, BAS2)
- Store (\LPFW, BAS2)
-
- /* Append any Mainboard defined GPIOs */
- If (CondRefOf (^GBUF, Local0)) {
- ConcatenateResTemplate (^RBUF, Local0, Local1)
- Return (Local1)
- }
-
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\LPEN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, LPB1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- PowerResource (PLPE, 0, 0)
- {
- Method (_STA)
- {
- Return (1)
- }
-
- Method (_OFF)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_ON)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
- }
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/lpss.asl b/src/soc/intel/fsp_baytrail/acpi/lpss.asl
deleted file mode 100644
index 6cac06a13e..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/lpss.asl
+++ /dev/null
@@ -1,707 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Device (SDM1)
-{
- Name (_HID, "INTL9C60")
- Name (_UID, 1)
- Name (_DDN, "DMA Controller #1")
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_DMA1_IRQ
- }
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\S0B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\S0EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-}
-
-Device (SDM2)
-{
- Name (_HID, "INTL9C60")
- Name (_UID, 2)
- Name (_DDN, "DMA Controller #2")
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_DMA2_IRQ
- }
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\S8B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\S8EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-}
-
-Device (I2C1)
-{
- Name (_HID, "80860F41")
- Name (_UID, 1)
- Name (_DDN, "I2C Controller #1")
-
- /* Standard Mode: HCNT, LCNT, SDA Hold Time */
- Name (SSCN, Package () { 0x200, 0x200, 0x6 })
-
- /* Fast Mode: HCNT, LCNT, SDA Hold Time */
- Name (FMCN, Package () { 0x55, 0x99, 0x6 })
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_I2C1_IRQ
- }
- FixedDMA (0x10, 0x0, Width32Bit, )
- FixedDMA (0x11, 0x1, Width32Bit, )
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\S1B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\S1EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, S1B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
-
-Device (I2C2)
-{
- Name (_HID, "80860F41")
- Name (_UID, 2)
- Name (_DDN, "I2C Controller #2")
-
- /* Standard Mode: HCNT, LCNT, SDA Hold Time */
- Name (SSCN, Package () { 0x200, 0x200, 0x6 })
-
- /* Fast Mode: HCNT, LCNT, SDA Hold Time */
- Name (FMCN, Package () { 0x55, 0x99, 0x6 })
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_I2C2_IRQ
- }
- FixedDMA (0x10, 0x0, Width32Bit, )
- FixedDMA (0x11, 0x1, Width32Bit, )
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\S2B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\S2EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, S2B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
-
-Device (I2C3)
-{
- Name (_HID, "80860F41")
- Name (_UID, 3)
- Name (_DDN, "I2C Controller #3")
-
- /* Standard Mode: HCNT, LCNT, SDA Hold Time */
- Name (SSCN, Package () { 0x200, 0x200, 0x6 })
-
- /* Fast Mode: HCNT, LCNT, SDA Hold Time */
- Name (FMCN, Package () { 0x55, 0x99, 0x6 })
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_I2C3_IRQ
- }
- FixedDMA (0x10, 0x0, Width32Bit, )
- FixedDMA (0x11, 0x1, Width32Bit, )
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\S3B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\S3EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, S3B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
-
-Device (I2C4)
-{
- Name (_HID, "80860F41")
- Name (_UID, 4)
- Name (_DDN, "I2C Controller #4")
-
- /* Standard Mode: HCNT, LCNT, SDA Hold Time */
- Name (SSCN, Package () { 0x200, 0x200, 0x6 })
-
- /* Fast Mode: HCNT, LCNT, SDA Hold Time */
- Name (FMCN, Package () { 0x55, 0x99, 0x6 })
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_I2C4_IRQ
- }
- FixedDMA (0x10, 0x0, Width32Bit, )
- FixedDMA (0x11, 0x1, Width32Bit, )
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\S4B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\S4EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, S4B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
-
-Device (I2C5)
-{
- Name (_HID, "80860F41")
- Name (_UID, 5)
- Name (_DDN, "I2C Controller #5")
-
- /* Standard Mode: HCNT, LCNT, SDA Hold Time */
- Name (SSCN, Package () { 0x200, 0x200, 0x6 })
-
- /* Fast Mode: HCNT, LCNT, SDA Hold Time */
- Name (FMCN, Package () { 0x55, 0x99, 0x6 })
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_I2C5_IRQ
- }
- FixedDMA (0x10, 0x0, Width32Bit, )
- FixedDMA (0x11, 0x1, Width32Bit, )
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\S5B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\S5EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, S5B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
-
-Device (I2C6)
-{
- Name (_HID, "80860F41")
- Name (_UID, 6)
- Name (_DDN, "I2C Controller #6")
-
- /* Standard Mode: HCNT, LCNT, SDA Hold Time */
- Name (SSCN, Package () { 0x200, 0x200, 0x6 })
-
- /* Fast Mode: HCNT, LCNT, SDA Hold Time */
- Name (FMCN, Package () { 0x55, 0x99, 0x6 })
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_I2C6_IRQ
- }
- FixedDMA (0x10, 0x0, Width32Bit, )
- FixedDMA (0x11, 0x1, Width32Bit, )
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\S6B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\S6EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, S6B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
-
-Device (I2C7)
-{
- Name (_HID, "80860F41")
- Name (_UID, 7)
- Name (_DDN, "I2C Controller #7")
-
- /* Standard Mode: HCNT, LCNT, SDA Hold Time */
- Name (SSCN, Package () { 0x200, 0x200, 0x6 })
-
- /* Fast Mode: HCNT, LCNT, SDA Hold Time */
- Name (FMCN, Package () { 0x55, 0x99, 0x6 })
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_I2C7_IRQ
- }
- FixedDMA (0x10, 0x0, Width32Bit, )
- FixedDMA (0x11, 0x1, Width32Bit, )
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\S7B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\S7EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, S7B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
-
-Device (SPI1)
-{
- Name (_HID, "80860F0E")
- Name (_UID, 1)
- Name (_DDN, "SPI Controller #2")
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_SPI_IRQ
- }
- FixedDMA (0x0, 0x0, Width32Bit, )
- FixedDMA (0x1, 0x1, Width32Bit, )
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\S9B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\S9EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, S9B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
-
-Device (PWM1)
-{
- Name (_HID, "80860F09")
- Name (_UID, 1)
- Name (_DDN, "PWM Controller #1")
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\SAB0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\SAEN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-}
-
-Device (PWM2)
-{
- Name (_HID, "80860F09")
- Name (_UID, 2)
- Name (_DDN, "PWM Controller #2")
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\SBB0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\SBEN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-}
-
-Device (UAR1)
-{
- Name (_HID, "80860F0A")
- Name (_UID, 1)
- Name (_DDN, "HS-UART Controller #1")
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_HSUART1_IRQ
- }
- FixedDMA (0x2, 0x2, Width32Bit, )
- FixedDMA (0x3, 0x3, Width32Bit, )
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\SCB0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\SCEN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, SCB1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
-
-Device (UAR2)
-{
- Name (_HID, "80860F0A")
- Name (_UID, 2)
- Name (_DDN, "HS-UART Controller #2")
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- LPSS_HSUART2_IRQ
- }
- FixedDMA (0x4, 0x4, Width32Bit, )
- FixedDMA (0x5, 0x5, Width32Bit, )
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\SDB0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\SDEN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, SDB1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/platform.asl b/src/soc/intel/fsp_baytrail/acpi/platform.asl
deleted file mode 100644
index 01be3514fd..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/platform.asl
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- * Copyright (C) 2012 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <southbridge/intel/common/acpi/platform.asl>
-
-/* The _PTS method (Prepare To Sleep) is called before the OS is
- * entering a sleep state. The sleep state number is passed in Arg0
- */
-
-Method(_PTS,1)
-{
-}
-
-/* The _WAK method is called on system wakeup */
-
-Method(_WAK,1)
-{
- Return(Package(){0,0})
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/scc.asl b/src/soc/intel/fsp_baytrail/acpi/scc.asl
deleted file mode 100644
index c26511c751..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/scc.asl
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Device (EMMC)
-{
- Name (_HID, "80860F14")
- Name (_CID, "PNP0D40")
- Name (_UID, 1)
- Name (_DDN, "eMMC Controller 4.5")
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- SCC_EMMC_IRQ
- }
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\C0B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\C0EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, C0B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Device (EM45)
- {
- /* Slot 0, Function 8 */
- Name (_ADR, 0x8)
-
- Method (_RMV, 0, NotSerialized)
- {
- Return (0)
- }
- }
-}
-
-Device (SDIO)
-{
- Name (_HID, "INT33BB")
- Name (_CID, "PNP0D40")
- Name (_UID, 2)
- Name (_DDN, "SDIO Controller")
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- SCC_SDIO_IRQ
- }
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\C1B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\C1EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, C1B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
-
-Device (SDCD)
-{
- Name (_HID, "80860F16")
- Name (_CID, "PNP0D40")
- Name (_UID, 3)
- Name (_DDN, "SD Card Controller")
-
- Name (RBUF, ResourceTemplate()
- {
- Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
- Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
- {
- SCC_SD_IRQ
- }
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
- Store (\C2B0, RBAS)
- Return (^RBUF)
- }
-
- Method (_STA)
- {
- If (LEqual (\C2EN, 1)) {
- Return (0xF)
- } Else {
- Return (0x0)
- }
- }
-
- OperationRegion (KEYS, SystemMemory, C2B1, 0x100)
- Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
- {
- Offset (0x84),
- PSAT, 32,
- }
-
- Method (_PS3)
- {
- Or (PSAT, 0x00000003, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-
- Method (_PS0)
- {
- And (PSAT, 0xfffffffc, PSAT)
- Or (PSAT, 0x00000000, PSAT)
- }
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/southcluster.asl b/src/soc/intel/fsp_baytrail/acpi/southcluster.asl
deleted file mode 100644
index ef4523b004..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/southcluster.asl
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <soc/intel/fsp_baytrail/include/soc/iomap.h>
-#include <soc/intel/fsp_baytrail/include/soc/irq.h>
-#include "../include/soc/baytrail.h"
-
-Scope(\)
-{
- // IO-Trap at 0x800. This is the ACPI->SMI communication interface.
-
- OperationRegion(IO_T, SystemIO, 0x800, 0x10)
- Field(IO_T, ByteAcc, NoLock, Preserve)
- {
- Offset(0x8),
- TRP0, 8 // IO-Trap at 0x808
- }
-
- // Intel Legacy Block
- OperationRegion(ILBS, SystemMemory, ILB_BASE_ADDRESS, ILB_BASE_SIZE)
- Field (ILBS, AnyAcc, NoLock, Preserve)
- {
- Offset (0x8),
- PRTA, 8,
- PRTB, 8,
- PRTC, 8,
- PRTD, 8,
- PRTE, 8,
- PRTF, 8,
- PRTG, 8,
- PRTH, 8,
- }
-}
-
-Name(_HID,EISAID("PNP0A08")) // PCIe
-Name(_CID,EISAID("PNP0A03")) // PCI
-
-Name(_BBN, 0)
-
-Name (MCRS, ResourceTemplate()
-{
- // Bus Numbers
- WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
- 0x0000, 0x0000, 0x00ff, 0x0000, 0x0100,,, PB00)
-
- // IO Region 0
- DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8,,, PI00)
-
- // PCI Config Space
- Io (Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008)
-
- // IO Region 1
- DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, 0x0d00, 0xffff, 0x0000, 0xf300,,, PI01)
-
- // VGA memory (0xa0000-0xbffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000a0000, 0x000bffff, 0x00000000,
- 0x00020000,,, ASEG)
-
- // OPROM reserved (0xc0000-0xc3fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000c0000, 0x000c3fff, 0x00000000,
- 0x00004000,,, OPR0)
-
- // OPROM reserved (0xc4000-0xc7fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000c4000, 0x000c7fff, 0x00000000,
- 0x00004000,,, OPR1)
-
- // OPROM reserved (0xc8000-0xcbfff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000c8000, 0x000cbfff, 0x00000000,
- 0x00004000,,, OPR2)
-
- // OPROM reserved (0xcc000-0xcffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000cc000, 0x000cffff, 0x00000000,
- 0x00004000,,, OPR3)
-
- // OPROM reserved (0xd0000-0xd3fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000d0000, 0x000d3fff, 0x00000000,
- 0x00004000,,, OPR4)
-
- // OPROM reserved (0xd4000-0xd7fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000d4000, 0x000d7fff, 0x00000000,
- 0x00004000,,, OPR5)
-
- // OPROM reserved (0xd8000-0xdbfff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000d8000, 0x000dbfff, 0x00000000,
- 0x00004000,,, OPR6)
-
- // OPROM reserved (0xdc000-0xdffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000dc000, 0x000dffff, 0x00000000,
- 0x00004000,,, OPR7)
-
- // BIOS Extension (0xe0000-0xe3fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000e0000, 0x000e3fff, 0x00000000,
- 0x00004000,,, ESG0)
-
- // BIOS Extension (0xe4000-0xe7fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000e4000, 0x000e7fff, 0x00000000,
- 0x00004000,,, ESG1)
-
- // BIOS Extension (0xe8000-0xebfff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000e8000, 0x000ebfff, 0x00000000,
- 0x00004000,,, ESG2)
-
- // BIOS Extension (0xec000-0xeffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000ec000, 0x000effff, 0x00000000,
- 0x00004000,,, ESG3)
-
- // System BIOS (0xf0000-0xfffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000f0000, 0x000fffff, 0x00000000,
- 0x00010000,,, FSEG)
-
- // PCI Memory Region (Top of memory-CONFIG_MMCONF_BASE_ADDRESS)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- 0x00000000,,, PMEM)
-
- // TPM Area (0xfed40000-0xfed44fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0xfed40000, 0xfed44fff, 0x00000000,
- 0x00005000,,, TPMR)
-
- // High PCI Memory Region
- QwordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- 0x00000000,,, UMEM)
-})
-
-Method (_CRS, 0, Serialized)
-{
- // Update PCI resource area
- CreateDwordField(MCRS, ^PMEM._MIN, PMIN)
- CreateDwordField(MCRS, ^PMEM._MAX, PMAX)
- CreateDwordField(MCRS, ^PMEM._LEN, PLEN)
-
- // TOLM is BMBOUND accessible from IOSF so is saved in NVS
- Store (\TOLM, PMIN)
- Store (Subtract(CONFIG_MMCONF_BASE_ADDRESS, 1), PMAX)
- Add (Subtract (PMAX, PMIN), 1, PLEN)
-
- // Update High PCI resource area
- CreateQwordField(MCRS, ^UMEM._MIN, UMIN)
- CreateQwordField(MCRS, ^UMEM._MAX, UMAX)
- CreateQwordField(MCRS, ^UMEM._LEN, ULEN)
-
- Store(0x40000000 * 48, UMIN) // Set base address to 48GB
- Store(0x40000000 * 16, ULEN) // Allocate 16GB for PCI space
- Add(UMIN, Subtract(ULEN, 1), UMAX)
-
- Return (MCRS)
-}
-
-/* Device Resource Consumption */
-Device (PDRC)
-{
- Name (_HID, EISAID("PNP0C02"))
- Name (_UID, 1)
-
- Name (PDRS, ResourceTemplate() {
- Memory32Fixed(ReadWrite, ABORT_BASE_ADDRESS, ABORT_BASE_SIZE)
- Memory32Fixed(ReadWrite, MCFG_BASE_ADDRESS, MCFG_BASE_SIZE)
- Memory32Fixed(ReadWrite, PMC_BASE_ADDRESS, PMC_BASE_SIZE)
- Memory32Fixed(ReadWrite, ILB_BASE_ADDRESS, ILB_BASE_SIZE)
- Memory32Fixed(ReadWrite, SPI_BASE_ADDRESS, SPI_BASE_SIZE)
- Memory32Fixed(ReadWrite, MPHY_BASE_ADDRESS, MPHY_BASE_SIZE)
- Memory32Fixed(ReadWrite, PUNIT_BASE_ADDRESS, PUNIT_BASE_SIZE)
- Memory32Fixed(ReadWrite, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE)
- })
-
- // Current Resource Settings
- Method (_CRS, 0, Serialized)
- {
- Return(PDRS)
- }
-}
-
-Method (_OSC, 4)
-{
- /* Check for proper GUID */
- If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766")))
- {
- /* Let OS control everything */
- Return (Arg3)
- }
- Else
- {
- /* Unrecognized UUID */
- CreateDWordField (Arg3, 0, CDW1)
- Or (CDW1, 4, CDW1)
- Return (Arg3)
- }
-}
-
-/* IOSF MBI Interface for kernel access */
-Device (IOSF)
-{
- Name (_HID, "INT33BD")
- Name (_CID, "INT33BD")
- Name (_UID, 1)
-
- Name (RBUF, ResourceTemplate ()
- {
- /* MCR / MDR / MCRX */
- Memory32Fixed (ReadWrite, 0, 12, RBAR)
- })
-
- Method (_CRS)
- {
- CreateDwordField (^RBUF, ^RBAR._BAS, RBAS)
- Store (Add (MCFG_BASE_ADDRESS, 0xD0), RBAS)
- Return (^RBUF)
- }
-}
-
-// LPC Bridge 0:1f.0
-#include "lpc.asl"
-
-#if INCLUDE_EHCI
-// USB EHCI 0:1d.0
-#include "usb.asl"
-#endif
-
-#if INCLUDE_XHCI
-// USB XHCI 0:14.0
-#include "xhci.asl"
-#endif
-
-// IRQ routing for each PCI device
-#include "irqroute.asl"
-
-Scope (\_SB)
-{
- // GPIO Devices
- #include "gpio.asl"
-
-#if INCLUDE_LPSS
- // LPSS Devices
- #include "lpss.asl"
-#endif
-
-#if INCLUDE_SCC
- // SCC Devices
- #include "scc.asl"
-#endif
-
-#if INCLUDE_LPE
- // LPE Device
- #include "lpe.asl"
-#endif
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/usb.asl b/src/soc/intel/fsp_baytrail/acpi/usb.asl
deleted file mode 100644
index c60bfcec46..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/usb.asl
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Intel Baytrail USB support */
-
-// EHCI Controller 0:1d.0
-
-Device (EHC1)
-{
- Name(_ADR, 0x001d0000)
-
- Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake
-
- // Leave USB ports on for to allow Wake from USB
-
- Method(_S3D,0) // Highest D State in S3 State
- {
- Return (2)
- }
-
- Method(_S4D,0) // Highest D State in S4 State
- {
- Return (2)
- }
-
- Device (HUB7)
- {
- Name (_ADR, 0x00000000)
-
- Device (PRT1) { Name (_ADR, 1) } // USB Port 0
- Device (PRT2) { Name (_ADR, 2) } // USB Port 1
- Device (PRT3) { Name (_ADR, 3) } // USB Port 2
- Device (PRT4) { Name (_ADR, 4) } // USB Port 3
- }
-}
diff --git a/src/soc/intel/fsp_baytrail/acpi/xhci.asl b/src/soc/intel/fsp_baytrail/acpi/xhci.asl
deleted file mode 100644
index dbd34474f8..0000000000
--- a/src/soc/intel/fsp_baytrail/acpi/xhci.asl
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Device (XHCI)
-{
- Name (_ADR, 0x00140000)
- Name (_PRW, Package () { 0x0d, 3 })
- Name (_S3D, 3) /* Highest D state in S3 state */
-
- Device (RHUB)
- {
- Name (_ADR, 0x00000000)
- Device (PRT1) { Name (_ADR, 1) }
- Device (PRT2) { Name (_ADR, 2) }
- Device (PRT3) { Name (_ADR, 3) }
- Device (PRT4) { Name (_ADR, 4) }
- }
-}
diff --git a/src/soc/intel/fsp_baytrail/bootblock/bootblock.c b/src/soc/intel/fsp_baytrail/bootblock/bootblock.c
deleted file mode 100644
index 5351a0162f..0000000000
--- a/src/soc/intel/fsp_baytrail/bootblock/bootblock.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google, Inc.
- * Copyright (C) 2013-2014 Sage Electronic Engineering LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/io.h>
-#include <device/mmio.h>
-#include <device/pci_ops.h>
-#include <cpu/x86/cache.h>
-#include <cpu/x86/msr.h>
-#include <cpu/x86/mtrr.h>
-#include <cpu/intel/microcode/microcode.c>
-#include <soc/iosf.h>
-#include <soc/pci_devs.h>
-#include <soc/spi.h>
-#include <soc/iomap.h>
-#include <soc/lpc.h>
-#include <soc/gpio.h>
-
-/*
- * check for a warm reset and do a hard reset instead.
- */
-static void check_for_warm_reset(void)
-{
-
- /*
- * Check if INIT# is asserted by port 0xCF9 and whether RCBA has been set.
- * If either is true, then this is a warm reset so execute a Hard Reset
- */
- if ((inb(0xcf9) == 0x04) ||
- (pci_io_read_config32(LPC_BDF, RCBA) & RCBA_ENABLE)) {
- outb(0x00, 0xcf9);
- outb(0x06, 0xcf9);
- }
-}
-
-static void set_var_mtrr(int reg, uint32_t base, uint32_t size, int type)
-{
- msr_t basem, maskm;
- basem.lo = base | type;
- basem.hi = 0;
- wrmsr(MTRR_PHYS_BASE(reg), basem);
- maskm.lo = ~(size - 1) | MTRR_PHYS_MASK_VALID;
- maskm.hi = (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1;
- wrmsr(MTRR_PHYS_MASK(reg), maskm);
-}
-
-/*
- * Enable Prefetching and Caching.
- */
-static void enable_spi_prefetch(void)
-{
- u32 *bcr = (u32 *)(SPI_BASE_ADDRESS + BCR);
- /* Enable caching and prefetching in the SPI controller. */
- write32(bcr, (read32(bcr) & ~SRC_MASK) | SRC_CACHE_PREFETCH);
-}
-
-static void enable_rom_caching(void)
-{
- msr_t msr;
-
- disable_cache();
- set_var_mtrr(1, CACHE_ROM_BASE, CACHE_ROM_SIZE, MTRR_TYPE_WRPROT);
- enable_cache();
-
- /* Enable Variable MTRRs */
- msr.hi = 0x00000000;
- msr.lo = 0x00000800;
- wrmsr(MTRR_DEF_TYPE_MSR, msr);
-}
-
-static void setup_mmconfig(void)
-{
- uint32_t reg;
-
- /* Set up the MMCONF range. The register lives in the BUNIT. The
- * IO variant of the config access needs to be used initially to
- * properly configure as the IOSF access registers live in PCI
- * config space. */
- reg = 0;
- /* Clear the extended register. */
- pci_io_write_config32(IOSF_PCI_DEV, MCRX_REG, reg);
- reg = CONFIG_MMCONF_BASE_ADDRESS | 1;
- pci_io_write_config32(IOSF_PCI_DEV, MDR_REG, reg);
- reg = IOSF_OPCODE(IOSF_OP_WRITE_BUNIT) | IOSF_PORT(IOSF_PORT_BUNIT) |
- IOSF_REG(BUNIT_MMCONF_REG) | IOSF_BYTE_EN;
- pci_io_write_config32(IOSF_PCI_DEV, MCR_REG, reg);
-}
-
-static const uint8_t lpc_pads[12] = {
- 70, 68, 67, 66, 69, 71, 65, 72, 86, 90, 88, 92,
-};
-
-static void set_up_lpc_pads(void)
-{
- uint32_t reg = IO_BASE_ADDRESS | SET_BAR_ENABLE;
- pci_write_config32(LPC_BDF, IOBASE, reg);
-
- for (reg = 0; reg < 12; reg++)
- score_select_func(lpc_pads[reg], 1);
-}
-
-static void bootblock_cpu_init(void)
-{
- check_for_warm_reset();
-
- /* Load microcode before any caching. */
- intel_update_microcode_from_cbfs();
-
- /* Allow memory-mapped PCI config access. */
- setup_mmconfig();
- enable_rom_caching();
- enable_spi_prefetch();
- set_up_lpc_pads();
-}
diff --git a/src/soc/intel/fsp_baytrail/chip.c b/src/soc/intel/fsp_baytrail/chip.c
deleted file mode 100644
index 3ca26add30..0000000000
--- a/src/soc/intel/fsp_baytrail/chip.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <soc/pci_devs.h>
-#include <soc/ramstage.h>
-#include <drivers/intel/fsp1_0/fsp_util.h>
-#include "chip.h"
-
-static void pci_domain_set_resources(struct device *dev)
-{
- assign_resources(dev->link_list);
-}
-
-static struct device_operations pci_domain_ops = {
- .read_resources = pci_domain_read_resources,
- .set_resources = pci_domain_set_resources,
- .enable_resources = NULL,
- .init = NULL,
- .scan_bus = pci_domain_scan_bus,
-};
-
-static struct device_operations cpu_bus_ops = {
- .read_resources = DEVICE_NOOP,
- .set_resources = DEVICE_NOOP,
- .enable_resources = DEVICE_NOOP,
- .init = baytrail_init_cpus,
- .scan_bus = NULL,
-};
-
-static void enable_dev(struct device *dev)
-{
- printk(BIOS_DEBUG, "enable_dev(%s, %d)\n",
- dev_name(dev), dev->path.type);
-
- /* Set the operations if it is a special bus type */
- if (dev->path.type == DEVICE_PATH_DOMAIN) {
- dev->ops = &pci_domain_ops;
- } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) {
- dev->ops = &cpu_bus_ops;
- } else if (dev->path.type == DEVICE_PATH_PCI) {
- /* Handle south cluster enablement. */
- if (PCI_SLOT(dev->path.pci.devfn) > GFX_DEV &&
- (dev->ops == NULL || dev->ops->enable == NULL)) {
- southcluster_enable_dev(dev);
- }
- }
-}
-
-/* Called at BS_DEV_INIT_CHIPS time -- very early. Just after BS_PRE_DEVICE. */
-static void soc_init(void *chip_info)
-{
- baytrail_init_pre_device();
-}
-
-struct chip_operations soc_intel_fsp_baytrail_ops = {
- CHIP_NAME("Intel BayTrail SoC")
- .enable_dev = enable_dev,
- .init = soc_init,
-};
-
-struct pci_operations soc_pci_ops = {
- .set_subsystem = &pci_dev_set_subsystem,
-};
diff --git a/src/soc/intel/fsp_baytrail/chip.h b/src/soc/intel/fsp_baytrail/chip.h
deleted file mode 100644
index e3167885b2..0000000000
--- a/src/soc/intel/fsp_baytrail/chip.h
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- * Copyright (C) 2014-2015 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _FSP_BAYTRAIL_CHIP_H_
-#define _FSP_BAYTRAIL_CHIP_H_
-
-#include <arch/acpi.h>
-#include <drivers/intel/fsp1_0/fsp_values.h>
-#include <drivers/i2c/designware/dw_i2c.h>
-
-/* The devicetree parser expects chip.h to reside directly in the path
- * specified by the devicetree. */
-
-struct soc_intel_fsp_baytrail_config {
-
-/* ***** UPD Configuration ***** */
-
- /* Spd addresses */
- uint8_t PcdMrcInitSPDAddr1;
- uint8_t PcdMrcInitSPDAddr2;
- #define SPD_ADDR_DEFAULT UPD_SPD_ADDR_DEFAULT
- #define SPD_ADDR_DISABLED UPD_SPD_ADDR_DISABLED
-
- /* SataMode
- * NOTE: These are offset by 1 to set 0 as "use default". This is so that
- * if the register value is not set in the devicetree.cb file, the default
- * value gets used. This is fixed up in the chipset_fsp_util.c code.
- *
- * 0x0 "IDE"
- * 0x1 "AHCI"
- */
- uint8_t PcdSataMode;
- #define SATA_MODE_DEFAULT UPD_DEFAULT
- #define SATA_MODE_IDE INCREMENT_FOR_DEFAULT(0)
- #define SATA_MODE_AHCI INCREMENT_FOR_DEFAULT(1)
-
- /*
- * MrcInitMmioSize
- * 0x400, "1.0 GB"s
- * 0x600, "1.5 GB"
- * 0x800, "2.0 GB"
- */
- uint16_t PcdMrcInitMmioSize;
- #define MMIO_SIZE_DEFAULT UPD_DEFAULT
- #define MMIO_SIZE_1_0_GB INCREMENT_FOR_DEFAULT(0x400)
- #define MMIO_SIZE_1_5_GB INCREMENT_FOR_DEFAULT(0x600)
- #define MMIO_SIZE_2_0_GB INCREMENT_FOR_DEFAULT(0x800)
-
- /*
- * eMMCBootMode
- * NOTE: These are offset by 1 to set 0 as "use default". This is so that
- * if the register value is not set in the devicetree.cb file, the default
- * value gets used. This is fixed up in the chipset_fsp_util.c code
- *
- * 0x0 "Disabled"
- * 0x1 "Auto"
- * 0x2 "eMMC 4.1"
- * 0x3 "eMMC 4.5"
- */
- uint8_t PcdeMMCBootMode;
- #define EMMC_USE_DEFAULT UPD_DEFAULT
- #define EMMC_DISABLED UPD_DISABLE
- #define EMMC_AUTO INCREMENT_FOR_DEFAULT(1)
- #define EMMC_4_1 INCREMENT_FOR_DEFAULT(2)
- #define EMMC_4_5 INCREMENT_FOR_DEFAULT(3)
- #define EMMC_FOLLOWS_DEVICETREE UPD_USE_DEVICETREE
-
- /*
- * IgdDvmt50PreAlloc
- * 0x01, "32 MB"
- * 0x02, "64 MB"
- * 0x03, "96 MB"
- * 0x04, "128 MB"
- * 0x05, "160 MB"
- * 0x06, "192 MB"
- * 0x07, "224 MB"
- * 0x08, "256 MB"
- * 0x09, "288 MB"
- * 0x0A, "320 MB"
- * 0x0B, "352 MB"
- * 0x0C, "384 MB"
- * 0x0D, "416 MB"
- * 0x0E, "448 MB"
- * 0x0F, "480 MB"
- * 0x10, "512 MB"
- */
- uint8_t PcdIgdDvmt50PreAlloc;
- #define IGD_MEMSIZE_DEFAULT UPD_DEFAULT
- #define IGD_MEMSIZE_32MB INCREMENT_FOR_DEFAULT(0x01)
- #define IGD_MEMSIZE_64MB INCREMENT_FOR_DEFAULT(0x02)
- #define IGD_MEMSIZE_96MB INCREMENT_FOR_DEFAULT(0x03)
- #define IGD_MEMSIZE_128MB INCREMENT_FOR_DEFAULT(0x04)
- #define IGD_MEMSIZE_160MB INCREMENT_FOR_DEFAULT(0x05)
- #define IGD_MEMSIZE_192MB INCREMENT_FOR_DEFAULT(0x06)
- #define IGD_MEMSIZE_224MB INCREMENT_FOR_DEFAULT(0x07)
- #define IGD_MEMSIZE_256MB INCREMENT_FOR_DEFAULT(0x08)
- #define IGD_MEMSIZE_288MB INCREMENT_FOR_DEFAULT(0x09)
- #define IGD_MEMSIZE_320MB INCREMENT_FOR_DEFAULT(0x0A)
- #define IGD_MEMSIZE_352MB INCREMENT_FOR_DEFAULT(0x0B)
- #define IGD_MEMSIZE_384MB INCREMENT_FOR_DEFAULT(0x0C)
- #define IGD_MEMSIZE_416MB INCREMENT_FOR_DEFAULT(0x0D)
- #define IGD_MEMSIZE_448MB INCREMENT_FOR_DEFAULT(0x0E)
- #define IGD_MEMSIZE_480MB INCREMENT_FOR_DEFAULT(0x0F)
- #define IGD_MEMSIZE_512MB INCREMENT_FOR_DEFAULT(0x10)
- #define IGD_MEMSIZE_MULTIPLIER 32
-
- /*
- * Selection 0x1 , "128 MB"
- * Selection 0x2 , "256 MB"
- * Selection 0x3 , "512 MB"
- */
- uint8_t PcdApertureSize;
- #define APERTURE_SIZE_DEFAULT UPD_DEFAULT
- #define APERTURE_SIZE_128MB INCREMENT_FOR_DEFAULT(1)
- #define APERTURE_SIZE_256MB INCREMENT_FOR_DEFAULT(2)
- #define APERTURE_SIZE_512MB INCREMENT_FOR_DEFAULT(3)
- #define APERTURE_SIZE_BASE 64
-
- /*
- * Selection 0x1 , "1 MB"
- * Selection 0x2 , "2 MB"
- */
- uint8_t PcdGttSize;
- #define GTT_SIZE_DEFAULT UPD_DEFAULT
- #define GTT_SIZE_1MB INCREMENT_FOR_DEFAULT(1)
- #define GTT_SIZE_2MB INCREMENT_FOR_DEFAULT(2)
-
- /*
- * Enable PCI Mode for LPSS SIO devices.
- * If disabled, LPSS SIO devices will run in ACPI mode.
- */
- uint8_t PcdLpssSioEnablePciMode;
- #define LPSS_PCI_MODE_DEFAULT UPD_DEFAULT
- #define LPSS_PCI_MODE_DISABLE UPD_DISABLE
- #define LPSS_PCI_MODE_ENABLE UPD_ENABLE
-
- /* modifiers for various enables */
- uint8_t AzaliaAutoEnable;
- #define AZALIA_FOLLOWS_DEVICETREE UPD_USE_DEVICETREE
- #define AZALIA_FSP_AUTO_ENABLE UPD_ENABLE
-
- uint8_t LpeAcpiModeEnable;
- #define LPE_ACPI_MODE_DISABLED UPD_DISABLE
- #define LPE_ACPI_MODE_ENABLED UPD_ENABLE
-
- uint32_t SerialDebugPortAddress;
- #define SerialDebugPortAddress_DEFAULT UPD_DEFAULT
-
- uint8_t SerialDebugPortType;
- #define SERIAL_DEBUG_PORT_DEFAULT UPD_DEFAULT
- #define SERIAL_DEBUG_PORT_TYPE_NONE INCREMENT_FOR_DEFAULT(0)
- #define SERIAL_DEBUG_PORT_TYPE_IO INCREMENT_FOR_DEFAULT(1)
- #define SERIAL_DEBUG_PORT_TYPE_MMIO INCREMENT_FOR_DEFAULT(2)
-
- uint8_t PcdMrcDebugMsg;
- #define MRC_DEBUG_MSG_DEFAULT UPD_DEFAULT
- #define MRC_DEBUG_MSG_DISABLE UPD_DISABLE
- #define MRC_DEBUG_MSG_ENABLE UPD_ENABLE
-
- uint8_t PcdSccEnablePciMode;
- #define SCC_PCI_MODE_DEFAULT UPD_DEFAULT
- #define SCC_PCI_MODE_DISABLE UPD_DISABLE
- #define SCC_PCI_MODE_ENABLE UPD_ENABLE
-
- uint8_t IgdRenderStandby;
- #define IGD_RENDER_STANDBY_DEFAULT UPD_DEFAULT
- #define IGD_RENDER_STANDBY_DISABLE UPD_DISABLE
- #define IGD_RENDER_STANDBY_ENABLE UPD_ENABLE
-
- uint8_t TxeUmaEnable;
- #define TXE_UMA_DEFAULT UPD_DEFAULT
- #define TXE_UMA_DISABLE UPD_DISABLE
- #define TXE_UMA_ENABLE UPD_ENABLE
-
- /*
- * PcdOsSelection
- * Selection 0x1 , "Android"
- * Selection 0x4 , "Linux OS"
- */
- uint8_t PcdOsSelection;
- #define OS_SELECTION_DEFAULT UPD_DEFAULT
- #define OS_SELECTION_ANDROID INCREMENT_FOR_DEFAULT(1)
- #define OS_SELECTION_LINUX INCREMENT_FOR_DEFAULT(4)
-
- /* PcdEMMC45DDR50Enabled */
- uint8_t PcdEMMC45DDR50Enabled;
- #define EMMC45_DDR50_DEFAULT UPD_DEFAULT
- #define EMMC45_DDR50_DISABLE UPD_DISABLE
- #define EMMC45_DDR50_ENABLE UPD_ENABLE
-
- /* PcdEMMC45HS200Enabled */
- uint8_t PcdEMMC45HS200Enabled;
- #define EMMC45_HS200_DEFAULT UPD_DEFAULT
- #define EMMC45_HS200_DISABLE UPD_DISABLE
- #define EMMC45_HS200_ENABLE UPD_ENABLE
-
- /* PcdEMMC45RetuneTimerValue */
- uint8_t PcdEMMC45RetuneTimerValue;
- #define EMMC45_RETURN_TIMER_DEFAULT UPD_DEFAULT
-
- /* PcdEnableIgd */
- uint8_t PcdEnableIgd;
- #define ENABLE_IGD_DEFAULT UPD_DEFAULT
- #define ENABLE_IGD_DISABLE UPD_DISABLE
- #define ENABLE_IGD_ENABLE UPD_ENABLE
-
- /* AutoSelfRefreshEnable */
- uint8_t AutoSelfRefreshEnable;
- #define AUTO_SELF_REFRESH_DEFAULT UPD_DEFAULT
- #define AUTO_SELF_REFRESH_DISABLE UPD_DISABLE
- #define AUTO_SELF_REFRESH_ENABLE UPD_ENABLE
-
- /* APTaskTimeoutCnt */
- uint16_t APTaskTimeoutCnt;
- #define AP_TASK_TIMEOUT_CNT_DEFAULT UPD_DEFAULT
-
- /* Memory down data */
- uint8_t EnableMemoryDown;
- #define MEMORY_DOWN_DEFAULT UPD_DEFAULT
- #define MEMORY_DOWN_DISABLE UPD_DISABLE
- #define MEMORY_DOWN_ENABLE UPD_ENABLE
-
- /*
- * PcdDRAMSpeed
- * Selection 0x0 , "800 MHz"
- * Selection 0x1 , "1066 MHz"
- * Selection 0x2 , "1333 MHz"
- * Selection 0x3 , "1600 MHz"
- */
- uint8_t DRAMSpeed;
- #define DRAM_SPEED_DEFAULT UPD_DEFAULT
- #define DRAM_SPEED_800MHZ INCREMENT_FOR_DEFAULT(0)
- #define DRAM_SPEED_1066MHZ INCREMENT_FOR_DEFAULT(1)
- #define DRAM_SPEED_1333MHZ INCREMENT_FOR_DEFAULT(2)
- #define DRAM_SPEED_1600MHZ INCREMENT_FOR_DEFAULT(3)
-
- /*
- * PcdDRAMType
- * Selection 0x0 , "DDR3"
- * Selection 0x1 , "DDR3L"
- * Selection 0x2 , "DDR3U"
- * Selection 0x4 , "LPDDR2"
- * Selection 0x5 , "LPDDR3"
- * Selection 0x6 , "DDR4"
- */
- uint8_t DRAMType;
- #define DRAM_TYPE_DEFAULT UPD_DEFAULT
- #define DRAM_TYPE_DDR3 INCREMENT_FOR_DEFAULT(0)
- #define DRAM_TYPE_DDR3L INCREMENT_FOR_DEFAULT(1)
-
- uint8_t DIMM0Enable;
- #define DIMM0_ENABLE_DEFAULT UPD_DEFAULT
- #define DIMM0_DISABLE UPD_DISABLE
- #define DIMM0_ENABLE UPD_ENABLE
-
- uint8_t DIMM1Enable;
- #define DIMM1_ENABLE_DEFAULT UPD_DEFAULT
- #define DIMM1_DISABLE UPD_DISABLE
- #define DIMM1_ENABLE UPD_ENABLE
-
- /*
- * PcdDIMMDWidth
- * Selection 0x0 , "x8"
- * Selection 0x1 , "x16"
- * Selection 0x2 , "x32"
- */
- uint8_t DIMMDWidth;
- #define DIMM_DWIDTH_DEFAULT UPD_DEFAULT
- #define DIMM_DWIDTH_X8 INCREMENT_FOR_DEFAULT(0)
- #define DIMM_DWIDTH_X16 INCREMENT_FOR_DEFAULT(1)
- #define DIMM_DWIDTH_X32 INCREMENT_FOR_DEFAULT(2)
-
- /*
- * PcdDIMMDensity
- * Selection 0x0 , "1 Gbit"
- * Selection 0x1 , "2 Gbit"
- * Selection 0x2 , "4 Gbit"
- * Selection 0x3 , "8 Gbit"
- */
- uint8_t DIMMDensity;
- #define DIMM_DENSITY_DEFAULT UPD_DEFAULT
- #define DIMM_DENSITY_1G_BIT INCREMENT_FOR_DEFAULT(0)
- #define DIMM_DENSITY_2G_BIT INCREMENT_FOR_DEFAULT(1)
- #define DIMM_DENSITY_4G_BIT INCREMENT_FOR_DEFAULT(2)
- #define DIMM_DENSITY_8G_BIT INCREMENT_FOR_DEFAULT(3)
-
- /*
- * PcdDIMMBusWidth
- * Selection 0x0 , "8 bits"
- * Selection 0x1 , "16 bits"
- * Selection 0x2 , "32 bits"
- * Selection 0x3 , "64 bits"
- */
- uint8_t DIMMBusWidth;
- #define DIMM_BUS_WIDTH_DEFAULT UPD_DEFAULT
- #define DIMM_BUS_WIDTH_8BIT INCREMENT_FOR_DEFAULT(0)
- #define DIMM_BUS_WIDTH_16BIT INCREMENT_FOR_DEFAULT(1)
- #define DIMM_BUS_WIDTH_32BIT INCREMENT_FOR_DEFAULT(2)
- #define DIMM_BUS_WIDTH_64BIT INCREMENT_FOR_DEFAULT(3)
-
- /*
- * PcdDIMMSides
- * Selection 0x0 , "1 Ranks"
- * Selection 0x1 , "2 Ranks"
- */
- uint8_t DIMMSides;
- #define DIMM_SIDES_DEFAULT UPD_DEFAULT
- #define DIMM_SIDES_1RANK INCREMENT_FOR_DEFAULT(0)
- #define DIMM_SIDES_2RANK INCREMENT_FOR_DEFAULT(1)
-
- uint8_t DIMMtCL;
- #define DIMM_TCL_DEFAULT UPD_DEFAULT
-
- uint8_t DIMMtRPtRCD;
- #define DIMM_TRP_TRCD_DEFAULT UPD_DEFAULT
-
- uint8_t DIMMtWR;
- #define DIMM_TWR_DEFAULT UPD_DEFAULT
-
- uint8_t DIMMtWTR;
- #define DIMM_TWTR_DEFAULT UPD_DEFAULT
-
- uint8_t DIMMtRRD;
- #define DIMM_TRRD_DEFAULT UPD_DEFAULT
-
- uint8_t DIMMtRTP;
- #define DIMM_TRTP_DEFAULT UPD_DEFAULT
-
- uint8_t DIMMtFAW;
- #define DIMM_TFAW_DEFAULT UPD_DEFAULT
-
- /* LPE Audio Clock configuration. */
- int lpe_codec_clk_freq; /* 19 or 25 are valid. */
- int lpe_codec_clk_num; /* Platform clock pins. [0:5] are valid. */
-
- /* Structure for designware I2C controller */
- struct dw_i2c_bus_config i2c[CONFIG_SOC_INTEL_I2C_DEV_MAX];
-
-/* ***** ACPI configuration ***** */
- /* Options for these are in src/arch/x86/include/arch/acpi.h */
- uint8_t fadt_pm_profile;
- uint16_t fadt_boot_arch;
-
-};
-
-#endif /* _FSP_BAYTRAIL_CHIP_H_ */
diff --git a/src/soc/intel/fsp_baytrail/cpu.c b/src/soc/intel/fsp_baytrail/cpu.c
deleted file mode 100644
index 787a41015a..0000000000
--- a/src/soc/intel/fsp_baytrail/cpu.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdlib.h>
-#include <console/console.h>
-#include <cpu/cpu.h>
-#include <cpu/intel/em64t100_save_state.h>
-#include <cpu/intel/microcode.h>
-#include <cpu/intel/smm_reloc.h>
-#include <cpu/intel/turbo.h>
-#include <cpu/intel/smm_reloc.h>
-#include <cpu/x86/cache.h>
-#include <cpu/x86/lapic.h>
-#include <cpu/x86/mp.h>
-#include <cpu/x86/msr.h>
-#include <cpu/x86/mtrr.h>
-#include <cpu/x86/smm.h>
-#include <reg_script.h>
-
-#include <soc/baytrail.h>
-#include <soc/msr.h>
-#include <soc/pattrs.h>
-#include <soc/ramstage.h>
-#include <soc/smm.h>
-
-/* Core level MSRs */
-static const struct reg_script core_msr_script[] = {
- /* Dynamic L2 shrink enable and threshold */
- REG_MSR_RMW(MSR_PKG_CST_CONFIG_CONTROL, ~0x3f000f, 0xe0008),
- /* Disable C1E */
- REG_MSR_RMW(MSR_POWER_CTL, ~0x2, 0),
- REG_MSR_OR(MSR_POWER_MISC, 0x44),
- REG_SCRIPT_END
-};
-
-static void baytrail_core_init(struct device *cpu)
-{
- printk(BIOS_DEBUG, "Init BayTrail core.\n");
-
- /* On bay trail the turbo disable bit is actually scoped at building
- * block level -- not package. For non-bsp cores that are within a
- * building block enable turbo. The cores within the BSP's building
- * block will just see it already enabled and move on. */
- if (lapicid())
- enable_turbo();
-
- /* Set core MSRs */
- reg_script_run(core_msr_script);
-
- /* Set this core to max frequency ratio */
- set_max_freq();
-}
-
-static struct device_operations cpu_dev_ops = {
- .init = baytrail_core_init,
-};
-
-static const struct cpu_device_id cpu_table[] = {
- { X86_VENDOR_INTEL, 0x30671 },
- { X86_VENDOR_INTEL, 0x30672 },
- { X86_VENDOR_INTEL, 0x30673 },
- { X86_VENDOR_INTEL, 0x30678 },
- { X86_VENDOR_INTEL, 0x30679 },
- { 0, 0 },
-};
-
-static const struct cpu_driver driver __cpu_driver = {
- .ops = &cpu_dev_ops,
- .id_table = cpu_table,
-};
-
-/*
- * MP and SMM loading initialization.
- */
-
-struct smm_relocation_params {
- msr_t smrr_base;
- msr_t smrr_mask;
-};
-
-static struct smm_relocation_params smm_reloc_params;
-
-static void pre_mp_init(void)
-{
- x86_mtrr_check();
-
- /* Enable the local CPU apics */
- setup_lapic();
-}
-
-static int get_cpu_count(void)
-{
- const struct pattrs *pattrs = pattrs_get();
-
- return pattrs->num_cpus;
-}
-
-static void fill_in_relocation_params(struct smm_relocation_params *params)
-{
- uintptr_t tseg_base;
- size_t tseg_size;
-
- /* All range registers are aligned to 4KiB */
- const u32 rmask = ~(4 * KiB - 1);
-
- smm_region(&tseg_base, &tseg_size);
-
- /* SMRR has 32-bits of valid address aligned to 4KiB. */
- params->smrr_base.lo = (tseg_base & rmask) | MTRR_TYPE_WRBACK;
- params->smrr_base.hi = 0;
- params->smrr_mask.lo = (~(tseg_size - 1) & rmask) | MTRR_PHYS_MASK_VALID;
- params->smrr_mask.hi = 0;
-}
-
-static void get_smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
- size_t *smm_save_state_size)
-{
- printk(BIOS_DEBUG, "Setting up SMI for CPU\n");
-
- fill_in_relocation_params(&smm_reloc_params);
-
- smm_subregion(SMM_SUBREGION_HANDLER, perm_smbase, perm_smsize);
-
- *smm_save_state_size = sizeof(em64t100_smm_state_save_area_t);
-}
-
-static void get_microcode_info(const void **microcode, int *parallel)
-{
- const struct pattrs *pattrs = pattrs_get();
-
- *microcode = pattrs->microcode_patch;
- *parallel = 1;
-}
-
-static void relocation_handler(int cpu, uintptr_t curr_smbase,
- uintptr_t staggered_smbase)
-{
- struct smm_relocation_params *relo_params = &smm_reloc_params;
- em64t100_smm_state_save_area_t *smm_state;
-
- /* Set up SMRR. */
- wrmsr(IA32_SMRR_PHYS_BASE, relo_params->smrr_base);
- wrmsr(IA32_SMRR_PHYS_MASK, relo_params->smrr_mask);
-
- smm_state = (void *)(SMM_EM64T100_SAVE_STATE_OFFSET + curr_smbase);
- smm_state->smbase = staggered_smbase;
-}
-
-static void enable_smis(void)
-{
- if (CONFIG(HAVE_SMI_HANDLER))
- smm_southbridge_enable_smi();
-}
-
-static const struct mp_ops mp_ops = {
- .pre_mp_init = pre_mp_init,
- .get_cpu_count = get_cpu_count,
- .get_smm_info = get_smm_info,
- .get_microcode_info = get_microcode_info,
- .pre_mp_smm_init = smm_southbridge_clear_state,
- .relocation_handler = relocation_handler,
- .post_mp_init = enable_smis,
-};
-
-void baytrail_init_cpus(struct device *dev)
-{
- struct bus *cpu_bus = dev->link_list;
-
- if (mp_init_with_smm(cpu_bus, &mp_ops)) {
- printk(BIOS_ERR, "MP initialization failure.\n");
- }
-}
diff --git a/src/soc/intel/fsp_baytrail/fsp/Kconfig b/src/soc/intel/fsp_baytrail/fsp/Kconfig
deleted file mode 100644
index 3fe358ec89..0000000000
--- a/src/soc/intel/fsp_baytrail/fsp/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2014 Sage Electronic Engineering, LLC.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-
-config BAYTRAIL_FSP_SPECIFIC_OPTIONS
- def_bool y
- select PLATFORM_USES_FSP1_0
- select USE_GENERIC_FSP_CAR_INC
- select FSP_USES_UPD
-
-config FSP_FILE
- string
- default "../intel/fsp/baytrail/BAYTRAIL_FSP.fd"
- help
- The path and filename of the Intel FSP binary for this platform.
-
-config FSP_LOC
- hex
- default 0xfffc0000
- help
- The location in CBFS that the FSP is located. This must match the
- value that is set in the FSP binary. If the FSP needs to be moved,
- rebase the FSP with Intel's BCT (tool).
-
- The Bay Trail FSP is built with a preferred base address of
- 0xFFFC0000.
diff --git a/src/soc/intel/fsp_baytrail/fsp/Makefile.inc b/src/soc/intel/fsp_baytrail/fsp/Makefile.inc
deleted file mode 100644
index 024dd70855..0000000000
--- a/src/soc/intel/fsp_baytrail/fsp/Makefile.inc
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2014 Sage Electronic Engineering, LLC.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-
-romstage-y += chipset_fsp_util.c
-ramstage-y += chipset_fsp_util.c
diff --git a/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c b/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c
deleted file mode 100644
index 01c876d3b8..0000000000
--- a/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- * Copyright (C) 2014-2015 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <types.h>
-#include <string.h>
-#include <console/console.h>
-#include <bootstate.h>
-#include <cbmem.h>
-#include <cf9_reset.h>
-#include <device/device.h>
-#include <device/pci_def.h>
-#include <soc/pci_devs.h>
-#include <drivers/intel/fsp1_0/fsp_util.h>
-#include "../chip.h"
-#include <arch/io.h>
-#include <soc/pmc.h>
-#include <soc/acpi.h>
-#include <soc/iomap.h>
-
-/* Copy the default UPD region and settings to a buffer for modification */
-static void GetUpdDefaultFromFsp (FSP_INFO_HEADER *FspInfo, UPD_DATA_REGION *UpdData)
-{
- VPD_DATA_REGION *VpdDataRgnPtr;
- UPD_DATA_REGION *UpdDataRgnPtr;
- VpdDataRgnPtr = (VPD_DATA_REGION *)(UINT32)(FspInfo->CfgRegionOffset + FspInfo->ImageBase);
- UpdDataRgnPtr = (UPD_DATA_REGION *)(UINT32)(VpdDataRgnPtr->PcdUpdRegionOffset + FspInfo->ImageBase);
- memcpy((void *)UpdData, (void *)UpdDataRgnPtr, sizeof(UPD_DATA_REGION));
-}
-
-/* default to just enabling HDMI audio */
-const PCH_AZALIA_CONFIG mAzaliaConfig = {
- .Pme = 1,
- .DS = 1,
- .DA = 0,
- .HdmiCodec = 1,
- .AzaliaVCi = 1,
- .Rsvdbits = 0,
- .AzaliaVerbTableNum = 0,
- .AzaliaVerbTable = NULL,
- .ResetWaitTimer = 300
-};
-
-typedef struct soc_intel_fsp_baytrail_config config_t;
-
-static const char *acpi_pci_mode_strings[] = {
- "Disabled",
- "Enabled in PCI Mode",
- "Enabled in ACPI Mode"
-};
-
-static const char *emmc_mode_strings[] = {
- "Disabled",
- "Auto",
- "eMMC 4.1",
- "eMMC 4.5"
-};
-
-/**
- * Update the UPD data based on values from devicetree.cb
- *
- * @param UpdData Pointer to the UPD Data structure
- */
-static void ConfigureDefaultUpdData(FSP_INFO_HEADER *FspInfo, UPD_DATA_REGION *UpdData)
-{
- DEVTREE_CONST struct device *dev;
- DEVTREE_CONST config_t *config;
- printk(FSP_INFO_LEVEL, "Configure Default UPD Data\n");
-
- dev = pcidev_path_on_root(SOC_DEVFN_SOC);
- config = config_of(dev);
-
- /* Set up default verb tables - Just HDMI audio */
- UpdData->AzaliaConfigPtr = (UINT32)&mAzaliaConfig;
-
- /* Set SPD addresses */
- UPD_SPD_CHECK(PcdMrcInitSPDAddr1);
- UPD_SPD_CHECK(PcdMrcInitSPDAddr2);
-
- UPD_DEFAULT_CHECK(PcdSataMode);
- UPD_DEFAULT_CHECK(PcdLpssSioEnablePciMode);
- UPD_DEFAULT_CHECK(PcdMrcInitMmioSize);
- UPD_DEFAULT_CHECK(PcdIgdDvmt50PreAlloc);
- UPD_DEFAULT_CHECK(PcdApertureSize);
- UPD_DEFAULT_CHECK(PcdGttSize);
- UPD_DEFAULT_CHECK(SerialDebugPortAddress);
- UPD_DEFAULT_CHECK(SerialDebugPortType);
- UPD_DEFAULT_CHECK(PcdMrcDebugMsg);
- UPD_DEFAULT_CHECK(PcdSccEnablePciMode);
- UPD_DEFAULT_CHECK(IgdRenderStandby);
- UPD_DEFAULT_CHECK(TxeUmaEnable);
- UPD_DEFAULT_CHECK(PcdOsSelection);
- UPD_DEFAULT_CHECK(PcdEMMC45DDR50Enabled);
- UPD_DEFAULT_CHECK(PcdEMMC45HS200Enabled);
- UPD_DEFAULT_CHECK(PcdEMMC45RetuneTimerValue);
- UPD_DEFAULT_CHECK(PcdEnableIgd);
- UPD_DEFAULT_CHECK(AutoSelfRefreshEnable);
- UPD_DEFAULT_CHECK(APTaskTimeoutCnt);
-
- if (config->PcdeMMCBootMode == EMMC_FOLLOWS_DEVICETREE)
- UpdData->PcdeMMCBootMode = 0;
- else if ((config->PcdeMMCBootMode != EMMC_USE_DEFAULT))
- UpdData->PcdeMMCBootMode = config->PcdeMMCBootMode - EMMC_DISABLED;
-
- UpdData->PcdMrcInitTsegSize = CONFIG_SMM_TSEG_SIZE >> 20;
-
- printk(FSP_INFO_LEVEL, "GTT Size:\t\t%d MB\n", UpdData->PcdGttSize);
- printk(FSP_INFO_LEVEL, "Tseg Size:\t\t%d MB\n", UpdData->PcdMrcInitTsegSize);
- printk(FSP_INFO_LEVEL, "Aperture Size:\t\t%d MB\n",
- APERTURE_SIZE_BASE << UpdData->PcdApertureSize);
- printk(FSP_INFO_LEVEL, "IGD Memory Size:\t%d MB\n",
- UpdData->PcdIgdDvmt50PreAlloc * IGD_MEMSIZE_MULTIPLIER);
- printk(FSP_INFO_LEVEL, "MMIO Size:\t\t%d MB\n", UpdData->PcdMrcInitMmioSize);
-
- /* Advance dev to PCI device 0.0 */
- for (dev = &dev_root; dev; dev = dev_find_next_pci_device(dev)){
- if (dev->path.type != DEVICE_PATH_PCI)
- continue;
- if (dev->path.pci.devfn == PCI_DEVFN(0x0,0))
- break;
- }
-
- /*
- * Loop through all the SOC devices in the devicetree
- * enabling and disabling them as requested.
- */
- for (; dev; dev = dev->sibling) {
-
- if (dev->path.type != DEVICE_PATH_PCI)
- continue;
-
- switch (dev->path.pci.devfn) {
- UPD_DEVICE_CHECK(SOC_DEVFN_SDIO, PcdEnableSdio, "Sdio:\t\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_SD, PcdEnableSdcard, "Sdcard:\t\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_SIO_DMA1, PcdEnableDma0, "SIO Dma 0:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_I2C1, PcdEnableI2C0, "SIO I2C0:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_I2C2, PcdEnableI2C1, "SIO I2C1:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_I2C3, PcdEnableI2C2, "SIO I2C2:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_I2C4, PcdEnableI2C3, "SIO I2C3:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_I2C5, PcdEnableI2C4, "SIO I2C4:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_I2C6, PcdEnableI2C5, "SIO I2C5:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_I2C7, PcdEnableI2C6, "SIO I2C6:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_SIO_DMA2, PcdEnableDma1, "SIO Dma1:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_PWM1, PcdEnablePwm0, "Pwm0:\t\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_PWM2, PcdEnablePwm1, "Pwm1:\t\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_HSUART1, PcdEnableHsuart0, "Hsuart0:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_HSUART2, PcdEnableHsuart1, "Hsuart1:\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_SPI, PcdEnableSpi, "Spi:\t\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_SATA, PcdEnableSata, "SATA:\t\t\t");
- UPD_DEVICE_CHECK(SOC_DEVFN_HDA, PcdEnableAzalia, "Azalia:\t\t\t");
-
- case SOC_DEVFN_MIPI: /* Camera / Image Signal Processing */
- if (FspInfo->ImageRevision >= FSP_GOLD3_REV_ID) {
- UpdData->ISPEnable = dev->enabled;
- } else {
- /* Gold2 and earlier FSP: ISPEnable is the field */
- /* next to PcdGttSize in UPD_DATA_REGION struct */
- *(&(UpdData->PcdGttSize)+sizeof(UINT8)) = dev->enabled;
- printk (FSP_INFO_LEVEL,
- "Baytrail Gold2 or earlier FSP, adjust ISPEnable offset.\n");
- }
- printk(FSP_INFO_LEVEL, "MIPI/ISP:\t\t%s\n",
- dev->enabled?"Enabled":"Disabled");
- break;
- case SOC_DEVFN_EMMC: /* EMMC 4.1*/
- if ((dev->enabled) &&
- (config->PcdeMMCBootMode == EMMC_FOLLOWS_DEVICETREE))
- UpdData->PcdeMMCBootMode = EMMC_4_1 - EMMC_DISABLED;
- break;
- case SOC_DEVFN_MMC45: /* MMC 4.5*/
- if ((dev->enabled) &&
- (config->PcdeMMCBootMode == EMMC_FOLLOWS_DEVICETREE))
- UpdData->PcdeMMCBootMode = EMMC_4_5 - EMMC_DISABLED;
- break;
- case SOC_DEVFN_XHCI:
- UpdData->PcdEnableXhci = dev->enabled;
- break;
- case SOC_DEVFN_EHCI:
- UpdData->PcdEnableXhci = !(dev->enabled);
- break;
-
- case SOC_DEVFN_LPE:
- if (dev->enabled)
- UpdData->PcdEnableLpe = config->LpeAcpiModeEnable;
- else
- UpdData->PcdEnableLpe = 0;
- break;
- }
- }
-
- if (UpdData->PcdEnableLpe < sizeof(acpi_pci_mode_strings) / sizeof (char *))
- printk(FSP_INFO_LEVEL, "Lpe:\t\t\t%s\n",
- acpi_pci_mode_strings[UpdData->PcdEnableLpe]);
- else
- printk(FSP_INFO_LEVEL, "Lpe:\t\t\tUnknown (0x%02x)\n",
- UpdData->PcdEnableLpe);
-
- if (UpdData->PcdeMMCBootMode < sizeof(emmc_mode_strings) / sizeof (char *))
- printk(FSP_INFO_LEVEL, "eMMC Mode:\t\t%s\n",
- emmc_mode_strings[UpdData->PcdeMMCBootMode]);
- else
- printk(FSP_INFO_LEVEL, "eMMC Mode:\t\tUnknown (0x%02x)\n",
- UpdData->PcdeMMCBootMode);
-
-
- if (UpdData->PcdEnableSata)
- printk(FSP_INFO_LEVEL, "SATA Mode:\t\t%s\n",
- UpdData->PcdSataMode?"AHCI":"IDE");
-
- printk(FSP_INFO_LEVEL, "Xhci:\t\t\t%s\n",
- UpdData->PcdEnableXhci?"Enabled":"Disabled");
-
- /*
- * set memory down parameters
- * Skip setting values if memory down is disabled
- * Skip setting values if FSP is earlier than gold 3
- */
- if (FspInfo->ImageRevision >= FSP_GOLD3_REV_ID) {
- UPD_MEMDOWN_CHECK(EnableMemoryDown, DECREMENT_FOR_DEFAULT);
- if (UpdData->PcdMemoryParameters.EnableMemoryDown) {
- UPD_MEMDOWN_CHECK(DRAMSpeed, DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DRAMType, DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMM0Enable, DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMM1Enable, DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMDWidth, DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMDensity, DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMBusWidth, DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMSides, DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMtCL, NO_DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMtRPtRCD, NO_DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMtWR, NO_DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMtWTR, NO_DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMtRRD, NO_DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMtRTP, NO_DECREMENT_FOR_DEFAULT);
- UPD_MEMDOWN_CHECK(DIMMtFAW, NO_DECREMENT_FOR_DEFAULT);
-
- printk (FSP_INFO_LEVEL,
- "Memory Down Data Existed : %s\n"\
- "- Speed (0: 800, 1: 1066, 2: 1333, 3: 1600): %d\n"\
- "- Type (0: DDR3, 1: DDR3L) : %d\n"\
- "- DIMM0 : %s\n"\
- "- DIMM1 : %s\n"\
- "- Width : x%d\n"\
- "- Density : %dGbit\n"
- "- BudWidth : %dbit\n"\
- "- Rank # : %d\n"\
- "- tCL : %02X\n"\
- "- tRPtRCD : %02X\n"\
- "- tWR : %02X\n"\
- "- tWTR : %02X\n"\
- "- tRRD : %02X\n"\
- "- tRTP : %02X\n"\
- "- tFAW : %02X\n"
- , (UpdData->PcdMemoryParameters.EnableMemoryDown) ? "Enabled" : "Disabled"
- , UpdData->PcdMemoryParameters.DRAMSpeed
- , UpdData->PcdMemoryParameters.DRAMType
- , (UpdData->PcdMemoryParameters.DIMM0Enable) ? "Enabled" : "Disabled"
- , (UpdData->PcdMemoryParameters.DIMM1Enable) ? "Enabled" : "Disabled"
- , 8 << (UpdData->PcdMemoryParameters.DIMMDWidth)
- , 1 << (UpdData->PcdMemoryParameters.DIMMDensity)
- , 8 << (UpdData->PcdMemoryParameters.DIMMBusWidth)
- , (UpdData->PcdMemoryParameters.DIMMSides) + 1
- , UpdData->PcdMemoryParameters.DIMMtCL
- , UpdData->PcdMemoryParameters.DIMMtRPtRCD
- , UpdData->PcdMemoryParameters.DIMMtWR
- , UpdData->PcdMemoryParameters.DIMMtWTR
- , UpdData->PcdMemoryParameters.DIMMtRRD
- , UpdData->PcdMemoryParameters.DIMMtRTP
- , UpdData->PcdMemoryParameters.DIMMtFAW
- );
- }
- }
-}
-
-/* Set up the Baytrail specific structures for the call into the FSP */
-void chipset_fsp_early_init(FSP_INIT_PARAMS *pFspInitParams,
- FSP_INFO_HEADER *fsp_ptr)
-{
- FSP_INIT_RT_BUFFER *pFspRtBuffer = pFspInitParams->RtBufferPtr;
- uint32_t prev_sleep_state;
-
- /* Get previous sleep state but don't clear */
- prev_sleep_state = chipset_prev_sleep_state(0);
- printk(BIOS_INFO, "prev_sleep_state = S%d\n", prev_sleep_state);
-
- /* Initialize the UPD Data */
- GetUpdDefaultFromFsp (fsp_ptr, pFspRtBuffer->Common.UpdDataRgnPtr);
- ConfigureDefaultUpdData(fsp_ptr, pFspRtBuffer->Common.UpdDataRgnPtr);
- pFspInitParams->NvsBufferPtr = NULL;
-
- /* Find the fastboot cache that was saved in the ROM */
- if (CONFIG(ENABLE_MRC_CACHE))
- pFspInitParams->NvsBufferPtr = find_and_set_fastboot_cache();
-
- if (prev_sleep_state == ACPI_S3) {
- /* S3 resume */
- if (pFspInitParams->NvsBufferPtr == NULL) {
- /* If waking from S3 and no cache then. */
- printk(BIOS_WARNING, "No MRC cache found in S3 resume path.\n");
- post_code(POST_RESUME_FAILURE);
- /* Clear Sleep Type */
- outl(inl(ACPI_BASE_ADDRESS + PM1_CNT) &
- ~(SLP_TYP), ACPI_BASE_ADDRESS + PM1_CNT);
- /* Reboot */
- printk(BIOS_WARNING, "Rebooting..\n" );
- system_reset();
- /* Should not reach here.. */
- die("Reboot System\n");
- }
- pFspRtBuffer->Common.BootMode = BOOT_ON_S3_RESUME;
- } else {
- /* Not S3 resume */
- pFspRtBuffer->Common.BootMode = BOOT_WITH_FULL_CONFIGURATION;
- }
-
- return;
-}
diff --git a/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.h b/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.h
deleted file mode 100644
index f75cc4e93d..0000000000
--- a/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- * Copyright (C) 2014 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef CHIPSET_FSP_UTIL_H
-#define CHIPSET_FSP_UTIL_H
-
-#include <fsp.h>
-#include <fsptypes.h>
-#include <fspfv.h>
-#include <fspffs.h>
-#include <fspapi.h>
-#include <fspplatform.h>
-#include <fspinfoheader.h>
-#include <fsphob.h>
-#include <fspvpd.h>
-#include <azalia.h>
-
-#define FSP_INFO_HEADER_GUID \
- { \
- 0x912740BE, 0x2284, 0x4734, {0xB9, 0x71, 0x84, 0xB0, 0x27, 0x35, 0x3F, 0x0C} \
- }
-
-/*
- * The FSP Image ID is different for each platform's FSP and
- * can be used to verify that the right FSP binary is loaded.
- * For the Bay Trail FSP, the Image Id is "VLYVIEW0".
- */
-#define FSP_IMAGE_ID_DWORD0 0x56594C56 /* 'VLYV' */
-#define FSP_IMAGE_ID_DWORD1 0x30574549 /* 'IEW0' */
-
-/* Revision of the FSP binary */
-#define FSP_GOLD3_REV_ID 0x00000303
-
-#define NO_DECREMENT_FOR_DEFAULT 0
-#define DECREMENT_FOR_DEFAULT 1
-
-#define UPD_MEMDOWN_CHECK(member, adjust) \
- if (config->member != UPD_DEFAULT) { \
- UpdData->PcdMemoryParameters.member = config->member - adjust; \
- }
-
-#endif /* CHIPSET_FSP_UTIL_H */
diff --git a/src/soc/intel/fsp_baytrail/gfx.c b/src/soc/intel/fsp_baytrail/gfx.c
deleted file mode 100644
index dab997275d..0000000000
--- a/src/soc/intel/fsp_baytrail/gfx.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright 2013 Google Inc.
- * Copyright (C) 2016 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <reg_script.h>
-#include <stdlib.h>
-#include <soc/gfx.h>
-#include <soc/iosf.h>
-#include <soc/pci_devs.h>
-#include <soc/ramstage.h>
-
-#define GFX_TIMEOUT 100000 /* 100ms */
-
-static const struct reg_script gpu_pre_vbios_script[] = {
- /* Make sure GFX is bus master with MMIO access */
- REG_PCI_OR32(PCI_COMMAND, PCI_COMMAND_MASTER|PCI_COMMAND_MEMORY),
- /* Display */
- REG_IOSF_WRITE(IOSF_PORT_PMC, PUNIT_PWRGT_CONTROL, 0xc0),
- REG_IOSF_POLL(IOSF_PORT_PMC, PUNIT_PWRGT_STATUS, 0xc0, 0xc0,
- GFX_TIMEOUT),
- /* Tx/Rx Lanes */
- REG_IOSF_WRITE(IOSF_PORT_PMC, PUNIT_PWRGT_CONTROL, 0xfff0c0),
- REG_IOSF_POLL(IOSF_PORT_PMC, PUNIT_PWRGT_STATUS, 0xfff0c0, 0xfff0c0,
- GFX_TIMEOUT),
- /* Common Lane */
- REG_IOSF_WRITE(IOSF_PORT_PMC, PUNIT_PWRGT_CONTROL, 0xfffcc0),
- REG_IOSF_POLL(IOSF_PORT_PMC, PUNIT_PWRGT_STATUS, 0xfffcc0, 0xfffcc0,
- GFX_TIMEOUT),
- /* Ungating Tx only */
- REG_IOSF_WRITE(IOSF_PORT_PMC, PUNIT_PWRGT_CONTROL, 0xf00cc0),
- REG_IOSF_POLL(IOSF_PORT_PMC, PUNIT_PWRGT_STATUS, 0xfffcc0, 0xf00cc0,
- GFX_TIMEOUT),
- /* Ungating Common Lane only */
- REG_IOSF_WRITE(IOSF_PORT_PMC, PUNIT_PWRGT_CONTROL, 0xf000c0),
- REG_IOSF_POLL(IOSF_PORT_PMC, PUNIT_PWRGT_STATUS, 0xffffc0, 0xf000c0,
- GFX_TIMEOUT),
- /* Ungating Display */
- REG_IOSF_WRITE(IOSF_PORT_PMC, PUNIT_PWRGT_CONTROL, 0xf00000),
- REG_IOSF_POLL(IOSF_PORT_PMC, PUNIT_PWRGT_STATUS, 0xfffff0, 0xf00000,
- GFX_TIMEOUT),
- REG_SCRIPT_END
-};
-
-static const struct reg_script gfx_post_vbios_script[] = {
- /* Deassert Render Force-Wake */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x1300b0, 0x80000000),
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x1300b4, 0x8000, 0, GFX_TIMEOUT),
- /* Deassert Media Force-Wake */
- REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x1300b8, 0x80000000),
- REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x1300bc, 0x8000, 0, GFX_TIMEOUT),
- /* Set Lock bits */
- REG_PCI_RMW32(GGC, 0xffffffff, 1),
- REG_PCI_RMW32(GSM_BASE, 0xffffffff, 1),
- REG_PCI_RMW32(GTT_BASE, 0xffffffff, 1),
- REG_SCRIPT_END
-};
-
-static inline void gfx_run_script(struct device *dev, const struct reg_script *ops)
-{
- reg_script_run_on_dev(dev, ops);
-}
-
-static void gfx_pre_vbios_init(struct device *dev)
-{
- printk(BIOS_INFO, "GFX: Pre VBIOS Init\n");
- gfx_run_script(dev, gpu_pre_vbios_script);
-}
-
-static void gfx_post_vbios_init(struct device *dev)
-{
- printk(BIOS_INFO, "GFX: Post VBIOS Init\n");
- gfx_run_script(dev, gfx_post_vbios_script);
-}
-
-static void gfx_init(struct device *dev)
-{
- /* Pre VBIOS Init */
- gfx_pre_vbios_init(dev);
-
- /* Run VBIOS */
- pci_dev_init(dev);
-
- /* Post VBIOS Init */
- gfx_post_vbios_init(dev);
-}
-
-static struct device_operations gfx_device_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = gfx_init,
- .ops_pci = &soc_pci_ops,
-};
-
-static const struct pci_driver gfx_driver __pci_driver = {
- .ops = &gfx_device_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = GFX_DEVID,
-};
diff --git a/src/soc/intel/fsp_baytrail/gpio.c b/src/soc/intel/fsp_baytrail/gpio.c
deleted file mode 100644
index 3e2499accd..0000000000
--- a/src/soc/intel/fsp_baytrail/gpio.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/io.h>
-#include <device/mmio.h>
-#include <device/pci.h>
-#include <console/console.h>
-#include <soc/gpio.h>
-#include <soc/pmc.h>
-
-/*
- * GPIO-to-Pad LUTs
- *
- * These tables translate the GPIO number to the pad configuration register
- * for that GPIO in the memory-mapped pad configuration registers.
- * See the tables:
- * PCU iLB GPIO CFIO_SCORE Address Map
- * PCU iLB GPIO CFIO_SSUS Address Map
- */
-static const u8 gpncore_gpio_to_pad[GPNCORE_COUNT] =
- { 19, 18, 17, 20, 21, 22, 24, 25, /* [ 0: 7] */
- 23, 16, 14, 15, 12, 26, 27, 1, /* [ 8:15] */
- 4, 8, 11, 0, 3, 6, 10, 13, /* [16:23] */
- 2, 5, 9 }; /* [24:26] */
-
-static const u8 gpscore_gpio_to_pad[GPSCORE_COUNT] =
- { 85, 89, 93, 96, 99, 102, 98, 101, /* [ 0: 7] */
- 34, 37, 36, 38, 39, 35, 40, 84, /* [ 8: 15] */
- 62, 61, 64, 59, 54, 56, 60, 55, /* [16: 23] */
- 63, 57, 51, 50, 53, 47, 52, 49, /* [24: 31] */
- 48, 43, 46, 41, 45, 42, 58, 44, /* [32: 39] */
- 95, 105, 70, 68, 67, 66, 69, 71, /* [40: 47] */
- 65, 72, 86, 90, 88, 92, 103, 77, /* [48: 55] */
- 79, 83, 78, 81, 80, 82, 13, 12, /* [56: 63] */
- 15, 14, 17, 18, 19, 16, 2, 1, /* [64: 71] */
- 0, 4, 6, 7, 9, 8, 33, 32, /* [72: 79] */
- 31, 30, 29, 27, 25, 28, 26, 23, /* [80: 87] */
- 21, 20, 24, 22, 5, 3, 10, 11, /* [88: 95] */
- 106, 87, 91, 104, 97, 100 }; /* [96:101] */
-
-static const u8 gpssus_gpio_to_pad[GPSSUS_COUNT] =
- { 29, 33, 30, 31, 32, 34, 36, 35, /* [ 0: 7] */
- 38, 37, 18, 7, 11, 20, 17, 1, /* [ 8:15] */
- 8, 10, 19, 12, 0, 2, 23, 39, /* [16:23] */
- 28, 27, 22, 21, 24, 25, 26, 51, /* [24:31] */
- 56, 54, 49, 55, 48, 57, 50, 58, /* [32:39] */
- 52, 53, 59, 40 }; /* [40:43] */
-
-
-/* GPIO bank descriptions */
-static const struct gpio_bank gpncore_bank = {
- .gpio_count = GPNCORE_COUNT,
- .gpio_to_pad = gpncore_gpio_to_pad,
- .legacy_base = GP_LEGACY_BASE_NONE,
- .pad_base = GPNCORE_PAD_BASE,
- .has_wake_en = 0,
- .gpio_f1_range_start = GPNCORE_GPIO_F1_RANGE_START,
- .gpio_f1_range_end = GPNCORE_GPIO_F1_RANGE_END,
-};
-
-static const struct gpio_bank gpscore_bank = {
- .gpio_count = GPSCORE_COUNT,
- .gpio_to_pad = gpscore_gpio_to_pad,
- .legacy_base = GPSCORE_LEGACY_BASE,
- .pad_base = GPSCORE_PAD_BASE,
- .has_wake_en = 0,
- .gpio_f1_range_start = GPSCORE_GPIO_F1_RANGE_START,
- .gpio_f1_range_end = GPSCORE_GPIO_F1_RANGE_END,
-};
-
-static const struct gpio_bank gpssus_bank = {
- .gpio_count = GPSSUS_COUNT,
- .gpio_to_pad = gpssus_gpio_to_pad,
- .legacy_base = GPSSUS_LEGACY_BASE,
- .pad_base = GPSSUS_PAD_BASE,
- .has_wake_en = 1,
- .gpio_f1_range_start = GPSSUS_GPIO_F1_RANGE_START,
- .gpio_f1_range_end = GPSSUS_GPIO_F1_RANGE_END,
-};
-
-
-static void setup_gpios(const struct soc_gpio_map *gpios,
- const struct gpio_bank *bank)
-{
- const struct soc_gpio_map *config;
- int gpio = 0;
- u32 reg, pad_conf0, *regmmio;
- u8 set, bit;
-
- u32 use_sel[4] = {0};
- u32 io_sel[4] = {0};
- u32 gp_lvl[4] = {0};
- u32 tpe[4] = {0};
- u32 tne[4] = {0};
- u32 wake_en[4] = {0};
-
- if (!gpios)
- return;
-
- for (config = gpios; config->pad_conf0 != GPIO_LIST_END;
- config++, gpio++) {
- if (gpio > bank->gpio_count)
- break;
-
- set = gpio >> 5;
- bit = gpio % 32;
-
- if (bank->legacy_base != GP_LEGACY_BASE_NONE) {
- /* Legacy IO configuration */
- use_sel[set] |= config->use_sel << bit;
- io_sel[set] |= config->io_sel << bit;
- gp_lvl[set] |= config->gp_lvl << bit;
- tpe[set] |= config->tpe << bit;
- tne[set] |= config->tne << bit;
-
- /* Some banks do not have wake_en ability */
- if (bank->has_wake_en)
- wake_en[set] |= config->wake_en << bit;
- }
-
- /* Pad configuration registers */
- regmmio = (u32 *)(bank->pad_base + 16 *
- bank->gpio_to_pad[gpio]);
-
- /* Add correct func to GPIO pad config */
- pad_conf0 = config->pad_conf0;
- if (config->is_gpio)
- {
- if (gpio >= bank->gpio_f1_range_start &&
- gpio <= bank->gpio_f1_range_end)
- pad_conf0 |= PAD_FUNC1;
- else
- pad_conf0 |= PAD_FUNC0;
- }
-
-#ifdef GPIO_DEBUG
- printk(BIOS_DEBUG, "Write Pad: Base(%p) - %x %x %x\n",
- regmmio, pad_conf0, config->pad_conf1, config->pad_val);
-#endif
-
- write32(regmmio + (PAD_CONF0_REG/sizeof(u32)), pad_conf0);
- write32(regmmio + (PAD_CONF1_REG/sizeof(u32)),
- config->pad_conf1);
- write32(regmmio + (PAD_VAL_REG/sizeof(u32)), config->pad_val);
- }
-
- if (bank->legacy_base != GP_LEGACY_BASE_NONE)
- for (set = 0; set <= (bank->gpio_count - 1) / 32; ++set) {
- reg = bank->legacy_base + 0x20 * set;
-
-#ifdef GPIO_DEBUG
- printk(BIOS_DEBUG,
- "Write GPIO: Reg(%x) - %x %x %x %x %x\n",
- reg, use_sel[set], io_sel[set], gp_lvl[set],
- tpe[set], tne[set]);
-#endif
-
- outl(use_sel[set], reg + LEGACY_USE_SEL_REG);
- outl(io_sel[set], reg + LEGACY_IO_SEL_REG);
- outl(gp_lvl[set], reg + LEGACY_GP_LVL_REG);
- outl(tpe[set], reg + LEGACY_TPE_REG);
- outl(tne[set], reg + LEGACY_TNE_REG);
-
- /* TS registers are WOC */
- outl(0, reg + LEGACY_TS_REG);
-
- if (bank->has_wake_en)
- outl(wake_en[set], reg + LEGACY_WAKE_EN_REG);
- }
-}
-
-static void setup_gpio_route(const struct soc_gpio_map *sus,
- const struct soc_gpio_map *core)
-{
- uint32_t route_reg = 0;
- int i;
-
- /* FIXME: SCI interrupts should be routed regardlessy. */
- if (!CONFIG(HAVE_SMI_HANDLER))
- return;
-
- for (i = 0; i < 8; i++) {
- /* SMI takes precedence and wake_en implies SCI. */
- if (sus[i].smi) {
- route_reg |= ROUTE_SMI << (2 * i);
- } else if (sus[i].sci) {
- route_reg |= ROUTE_SCI << (2 * i);
- }
-
- if (core[i].smi) {
- route_reg |= ROUTE_SMI << (2 * (i + 8));
- } else if (core[i].sci) {
- route_reg |= ROUTE_SCI << (2 * (i + 8));
- }
- }
-
- smm_southcluster_save_gpio_route(route_reg);
-}
-
-static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS],
- const struct gpio_bank *bank)
-{
- u32 *reg = (u32 *)(bank->pad_base + PAD_BASE_DIRQ_OFFSET);
- u32 val;
- int i;
-
- /* Write all four DIRQ registers */
- for (i=0; i<4; ++i) {
- val = dirq[i * 4 + 3] << 24 | dirq[i * 4 + 2] << 16 |
- dirq[i * 4 + 1] << 8 | dirq[i * 4];
- write32(reg + i, val);
-#ifdef GPIO_DEBUG
- printk(BIOS_DEBUG, "Write DIRQ reg(%x) - %x\n",
- reg + i, val);
-#endif
- }
-}
-
-void setup_soc_gpios(struct soc_gpio_config *config)
-{
- if (config) {
- setup_gpios(config->ncore, &gpncore_bank);
- setup_gpios(config->score, &gpscore_bank);
- setup_gpios(config->ssus, &gpssus_bank);
- setup_gpio_route(config->ssus, config->score);
-
- if (config->core_dirq)
- setup_dirqs(*config->core_dirq, &gpscore_bank);
- if (config->sus_dirq)
- setup_dirqs(*config->sus_dirq, &gpssus_bank);
- }
-
-}
-
-struct soc_gpio_config* __weak mainboard_get_gpios(void)
-{
- printk(BIOS_DEBUG, "Default/empty GPIO config\n");
- return NULL;
-}
-
-/** \brief returns the input / output value from an SCORE GPIO
- *
- * @param gpio_num The GPIO number being read
- * @return The current input or output value of the GPIO
- */
-uint8_t read_score_gpio(uint8_t gpio_num)
-{
- uint8_t retval = 0;
- if (gpio_num < GPSCORE_COUNT)
- retval = score_get_gpio(gpscore_gpio_to_pad[gpio_num]);
-
- return retval;
-}
-
-/** \brief sets an output SCORE GPIO to desired value
- *
- * @param gpio_num The GPIO number being read
- * @param val The value this output must be set to (0 or 1)
- * @return void
- */
-void write_score_gpio(uint8_t gpio_num, uint8_t val)
-{
- if (gpio_num < GPSCORE_COUNT)
- score_set_gpio(gpscore_gpio_to_pad[gpio_num], val);
-}
-
-/** \brief returns the input / output value from an SSUS GPIO
- *
- * @param gpio_num The GPIO number being read
- * @return The current input or output value of the GPIO
- */
-uint8_t read_ssus_gpio(uint8_t gpio_num)
-{
- uint8_t retval = 0;
- if (gpio_num < GPSSUS_COUNT)
- retval = ssus_get_gpio(gpssus_gpio_to_pad[gpio_num]);
-
- return retval;
-}
-
-/** \brief sets an output SSUS GPIO to desired value
- *
- * @param gpio_num The GPIO number being read
- * @param val The value this output must be set to (0 or 1)
- * @return void
- */
-void write_ssus_gpio(uint8_t gpio_num, uint8_t val)
-{
- if (gpio_num < GPSSUS_COUNT)
- ssus_set_gpio(gpssus_gpio_to_pad[gpio_num], val);
-}
-
-/** \brief Sets up the function, pulls, and Input/Output of a Baytrail
- * SSUS (S5) or SCORE (S0) GPIO
- *
- * @param ssus_gpio 1 if SSUS GPIO is being configured 0 if SCORE GPIO
- * @param gpio_num The GPIO number being configured
- * @param pconf0 function, pull direction, and pull value
- * function: PAD_FUNC0 - PAD_FUNC7
- * pull assign: PAD_PULL_DISABLE / PAD_PULL_UP / PAD_PULL_DOWN
- * pull_value: PAD_PU_2K / PAD_PU_10K / PAD_PU_20K / PAD_PU_40K
- * @param pad_val input / output state and pad value
- * io state: PAD_VAL_INPUT / PAD_VAL_OUTPUT
- * pad value: PAD_VAL_HIGH / PAD_VAL_LOW
- */
-static void configure_ssus_score_gpio(uint8_t ssus_gpio, uint8_t gpio_num,
- uint32_t pconf0, uint32_t pad_val)
-{
- uint32_t reg;
- uint32_t *pad_addr;
- if (ssus_gpio)
- pad_addr = ssus_pconf0(gpssus_gpio_to_pad[gpio_num]);
- else
- pad_addr = score_pconf0(gpscore_gpio_to_pad[gpio_num]);
-
- if ((ssus_gpio && gpio_num >= GPSSUS_COUNT) ||
- (gpio_num >= GPSCORE_COUNT)){
- printk(BIOS_WARNING,"Warning: Invalid %s GPIO specified (%d)\n",
- ssus_gpio ? "SSUS" : "SCORE", gpio_num);
- return;
- }
-
- /*
- * Pad Configuration 0 Register
- * 2:0 - func_pin_mux
- * 8:7 - Pull assignment: 00 - Non pull 01 - Pull Up 10 - Pull down
- * 11 - reserved
- * 10:9 - Pull strength: 00 - 2K 01 - 10K 10 - 20K 11 - 40K
- */
- reg = PAD_CONFIG0_DEFAULT;
- reg |= pconf0 & 0x787;
- write32(pad_addr + (PAD_CONF0_REG/sizeof(u32)), reg);
-
- /*
- * Pad Value Register
- * 0: Pad value
- * 1: output enable (0 is enabled)
- * 2: input enable (0 is enabled)
- */
- reg = read32(pad_addr + (PAD_VAL_REG/sizeof(u32)));
- reg &= ~0x7;
- reg |= pad_val & 0x7;
- write32(pad_addr + (PAD_VAL_REG/sizeof(u32)), reg);
-}
-
-/** \brief Sets up the function, pulls, and Input/Output of a Baytrail S5 GPIO
- *
- */
-void configure_ssus_gpio(uint8_t gpio_num, uint32_t pconf0, uint32_t pad_val)
-{
- configure_ssus_score_gpio(1, gpio_num, pconf0, pad_val);
-}
-
-/** \brief Sets up the function, pulls, and Input/Output of a Baytrail S5 GPIO
- *
- */
-void configure_score_gpio(uint8_t gpio_num, uint32_t pconf0, uint32_t pad_val)
-{
- configure_ssus_score_gpio(0, gpio_num, pconf0, pad_val);
-}
diff --git a/src/soc/intel/fsp_baytrail/i2c.c b/src/soc/intel/fsp_baytrail/i2c.c
deleted file mode 100644
index 37ce2d0b21..0000000000
--- a/src/soc/intel/fsp_baytrail/i2c.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014-2019 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <cbmem.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci_def.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <drivers/i2c/designware/dw_i2c.h>
-#include <soc/i2c.h>
-#include <soc/iosf.h>
-#include <soc/iomap.h>
-#include <soc/nvs.h>
-#include <soc/pci_devs.h>
-
-#include "chip.h"
-
-/* Convert I2C bus number to PCI device and function */
-int dw_i2c_soc_bus_to_devfn(unsigned int bus)
-{
- if (bus <= 6)
- return PCI_DEVFN(SIO1_DEV, bus + 1);
- else
- return -1;
-}
-
-/* Convert PCI device and function to I2C bus number */
-int dw_i2c_soc_dev_to_bus(struct device *dev)
-{
- pci_devfn_t devfn = dev->path.pci.devfn;
- if ((devfn >= SOC_DEVFN_I2C1) && (devfn <= SOC_DEVFN_I2C7))
- return PCI_FUNC(devfn) - 1;
- else
- return -1;
-}
-
-/* Getting I2C bus configuration from devicetree config */
-const struct dw_i2c_bus_config *dw_i2c_get_soc_cfg(unsigned int bus)
-{
- const struct soc_intel_fsp_baytrail_config *config;
- const struct device *dev = pcidev_path_on_root(SOC_DEVFN_SOC);
-
- if (dev && dev->chip_info) {
- config = dev->chip_info;
- return &config->i2c[bus];
- }
-
- die("Could not find SA_DEV_ROOT devicetree config!\n");
-}
-
-#if !ENV_RAMSTAGE
-static int lpss_i2c_early_init_bus(unsigned int bus)
-{
- const struct dw_i2c_bus_config *config;
- const struct device *tree_dev;
- pci_devfn_t dev;
- int devfn;
- uintptr_t base;
-
- /* Find the PCI device for this bus controller */
- devfn = dw_i2c_soc_bus_to_devfn(bus);
- if (devfn < 0) {
- printk(BIOS_ERR, "I2C%u device not found\n", bus);
- return -1;
- }
-
- /* Look up the controller device in the devicetree */
- dev = PCI_DEV(0, PCI_SLOT(devfn), PCI_FUNC(devfn));
- tree_dev = pcidev_path_on_root(devfn);
- if (!tree_dev || !tree_dev->enabled) {
- printk(BIOS_ERR, "I2C%u device not enabled\n", bus);
- return -1;
- }
-
- /* Skip if not enabled for early init */
- config = dw_i2c_get_soc_cfg(bus);
- if (!config || !config->early_init) {
- printk(BIOS_DEBUG, "I2C%u not enabled for early init\n", bus);
- return -1;
- }
-
- /* Prepare early base address for access before memory */
- base = EARLY_I2C_BASE(bus);
- pci_write_config32(dev, PCI_BASE_ADDRESS_0, base);
- pci_write_config32(dev, PCI_COMMAND,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
- /* Take device out of reset */
- write32((void *)((uint32_t)base + I2C_SOFTWARE_RESET), I2C_RESET_APB | I2C_RESET_FUNC);
-
- /* Initialize the controller */
- if (dw_i2c_init(bus, config) < 0) {
- printk(BIOS_ERR, "I2C%u failed to initialize\n", bus);
- return -1;
- }
-
- return 0;
-}
-
-uintptr_t dw_i2c_base_address(unsigned int bus)
-{
- int devfn;
- pci_devfn_t dev;
- uintptr_t base;
-
- /* Find device+function for this controller */
- devfn = dw_i2c_soc_bus_to_devfn(bus);
- if (devfn < 0)
- return 0;
-
- /* Form a PCI address for this device */
- dev = PCI_DEV(0, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
- /* Read the first base address for this device */
- base = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & 0xfffffff0;
-
- /* Attempt to initialize bus if base is not set yet */
- if (!base && !lpss_i2c_early_init_bus(bus))
- base = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & 0xfffffff0;
- return base;
-}
-#else
-
-uintptr_t dw_i2c_base_address(unsigned int bus)
-{
- int devfn;
- struct device *dev;
- struct resource *bar = NULL;
-
- /* bus -> devfn */
- devfn = dw_i2c_soc_bus_to_devfn(bus);
-
- if (devfn < 0)
- return (uintptr_t)NULL;
-
- /* devfn -> dev */
- dev = pcidev_path_on_root(devfn);
- if (dev && dev->enabled) {
- /* dev -> bar0 */
- bar = find_resource(dev, PCI_BASE_ADDRESS_0);
- }
-
- if (bar)
- return bar->base;
- else
- return (uintptr_t)NULL;
-}
-
-static void i2c_enable_acpi_mode(struct device *dev, int iosf_reg, int nvs_index)
-{
- struct resource *bar;
- global_nvs_t *gnvs;
- uint32_t val;
-
- /* Find ACPI NVS to update BARs */
- gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS);
- if (!gnvs) {
- printk(BIOS_ERR, "Unable to locate Global NVS\n");
- return;
- }
-
- /* Save BAR0 and BAR1 to ACPI NVS */
- bar = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (bar)
- gnvs->dev.lpss_bar0[nvs_index] = (uint32_t)bar->base;
-
- bar = find_resource(dev, PCI_BASE_ADDRESS_1);
- if (bar)
- gnvs->dev.lpss_bar1[nvs_index] = (uint32_t)bar->base;
-
- /* Device is enabled in ACPI mode */
- gnvs->dev.lpss_en[nvs_index] = 1;
-
- /* Put device in ACPI mode */
- val = iosf_lpss_read(iosf_reg);
- val |= (LPSS_CTL_PCI_CFG_DIS | LPSS_CTL_ACPI_INT_EN);
- iosf_lpss_write(iosf_reg, val);
- val = pci_read_config32(dev, PCI_COMMAND);
- val |= PCI_COMMAND_INT_DISABLE;
- pci_write_config32(dev, PCI_COMMAND, val);
-}
-
-static void dev_enable_snoop_and_pm(struct device *dev, int iosf_reg)
-{
- uint32_t val;
-
- val = iosf_lpss_read(iosf_reg);
- val &= ~(LPSS_CTL_SNOOP | LPSS_CTL_NOSNOOP);
- val |= (LPSS_CTL_SNOOP | LPSS_CTL_PM_CAP_PRSNT);
- iosf_lpss_write(iosf_reg, val);
-}
-
-static void dev_ctl_reg(struct device *dev, int *iosf_reg, int *nvs_index)
-{
- int bus;
-
- bus = dw_i2c_soc_dev_to_bus(dev);
- if (bus >= 0) {
- *iosf_reg = LPSS_I2C1_CTL + (bus * 8);
- *nvs_index = bus + 1;
- } else {
-
- *iosf_reg = -1;
- *nvs_index = -1;
- }
-}
-
-static void i2c_disable_resets(struct device *dev)
-{
- uint32_t base;
-
- printk(BIOS_DEBUG, "Releasing I2C device from reset.\n");
- base = pci_read_config32(dev, PCI_BASE_ADDRESS_0) & 0xfffffff0;
- write32((void *)(base + I2C_SOFTWARE_RESET), I2C_RESET_APB | I2C_RESET_FUNC);
-}
-
-static void i2c_lpss_init(struct device *dev)
-{
- struct soc_intel_fsp_baytrail_config *config = dev->chip_info;
- int iosf_reg, nvs_index;
-
- dev_ctl_reg(dev, &iosf_reg, &nvs_index);
-
- if (iosf_reg < 0) {
- int slot = PCI_SLOT(dev->path.pci.devfn);
- int func = PCI_FUNC(dev->path.pci.devfn);
- printk(BIOS_DEBUG, "Could not find iosf_reg for %02x.%01x\n",
- slot, func);
- return;
- }
- dev_enable_snoop_and_pm(dev, iosf_reg);
- i2c_disable_resets(dev);
-
- if (config && (config->PcdLpssSioEnablePciMode == LPSS_PCI_MODE_DISABLE))
- i2c_enable_acpi_mode(dev, iosf_reg, nvs_index);
-}
-/*
- * This function ensures that the device is actually out of reset and
- * it is ready for initialization sequence.
- */
-static void dw_i2c_device_init(struct device *dev)
-{
- int bus = dw_i2c_soc_dev_to_bus(dev);
-
- if (bus < 0)
- return;
-
- if (!dw_i2c_base_address(bus))
- return;
- i2c_lpss_init(dev);
- dw_i2c_dev_init(dev);
-}
-
-static struct device_operations i2c_dev_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .scan_bus = scan_smbus,
- .ops_i2c_bus = &dw_i2c_bus_ops,
- .ops_pci = &pci_dev_ops_pci,
- .init = dw_i2c_device_init,
- .acpi_fill_ssdt_generator = dw_i2c_acpi_fill_ssdt,
-};
-
-static const unsigned short pci_device_ids[] = {
- I2C1_DEVID,
- I2C2_DEVID,
- I2C3_DEVID,
- I2C4_DEVID,
- I2C5_DEVID,
- I2C6_DEVID,
- I2C7_DEVID,
- 0
-};
-
-static const struct pci_driver pch_i2c __pci_driver = {
- .ops = &i2c_dev_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
-#endif
diff --git a/src/soc/intel/fsp_baytrail/include/soc/acpi.h b/src/soc/intel/fsp_baytrail/include/soc/acpi.h
deleted file mode 100644
index 917419e4df..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/acpi.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google, Inc.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_ACPI_H_
-#define _BAYTRAIL_ACPI_H_
-
-#include <arch/acpi.h>
-#include <soc/nvs.h>
-#include <device/device.h>
-
-void acpi_create_serialio_ssdt(acpi_header_t *ssdt);
-void acpi_fill_in_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt);
-unsigned long acpi_madt_irq_overrides(unsigned long current);
-void acpi_init_gnvs(global_nvs_t *gnvs);
-
-#ifndef __SIMPLE_DEVICE__
-unsigned long southcluster_write_acpi_tables(struct device *device,
- unsigned long current,
- struct acpi_rsdp *rsdp);
-void southcluster_inject_dsdt(struct device *device);
-#endif
-
-#endif /* _BAYTRAIL_ACPI_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/baytrail.h b/src/soc/intel/fsp_baytrail/include/soc/baytrail.h
deleted file mode 100644
index de902aac6f..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/baytrail.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2008 coresystems GmbH
- * Copyright (C) 2011 Google Inc.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __SOC_INTEL_FSP_BAYTRAIL_BAYTRAIL_H__
-#define __SOC_INTEL_FSP_BAYTRAIL_BAYTRAIL_H__
-
-#define DEFAULT_ECBASE CONFIG_MMCONF_BASE_ADDRESS
-#define CPU_MICROCODE_CBFS_LEN 0x26000
-
-/* Southbridge internal device IO BARs (Set to match FSP settings) */
-#define SMBUS_IO_BASE 0xefa0
-#define SMBUS_SLAVE_ADDR 0x24
-#define DEFAULT_GPIOBASE 0x0500
-#define DEFAULT_ABASE 0x0400
-
-/* Southbridge internal device MEM BARs (Set to match FSP settings) */
-#define DEFAULT_IBASE 0xfed08000
-#define DEFAULT_PBASE 0xfed03000
-#ifndef __ACPI__
-#define DEFAULT_RCBA ((u8 *)0xfed1c000)
-#else
-#define DEFAULT_RCBA 0xfed1c000
-#endif
-
-/* Device 0:0.0 PCI configuration space (Host Bridge) */
-#define SKPAD 0xFC
-
-/* SOC types */
-#define SOC_TYPE_BAYTRAIL 0x0F1C
-
-/* Everything below this line is ignored in the DSDT */
-#ifndef __ACPI__
-#ifndef __ASSEMBLER__
-#include <device/device.h>
-
-int bridge_silicon_revision(void);
-void rangeley_early_initialization(void);
-void set_max_freq(void);
-
-/* soc.c */
-int soc_silicon_revision(void);
-int soc_silicon_type(void);
-int soc_silicon_supported(int type, int rev);
-void soc_enable(struct device *dev);
-
-void report_platform_info(void);
-
-#endif /* __ASSEMBLER__ */
-#endif /* __ACPI__ */
-
-#endif
diff --git a/src/soc/intel/fsp_baytrail/include/soc/device_nvs.h b/src/soc/intel/fsp_baytrail/include/soc/device_nvs.h
deleted file mode 100644
index ec1e568bfd..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/device_nvs.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_DEVICE_NVS_H_
-#define _BAYTRAIL_DEVICE_NVS_H_
-
-#include <stdint.h>
-
-#define LPSS_NVS_SIO_DMA1 0
-#define LPSS_NVS_I2C1 1
-#define LPSS_NVS_I2C2 2
-#define LPSS_NVS_I2C3 3
-#define LPSS_NVS_I2C4 4
-#define LPSS_NVS_I2C5 5
-#define LPSS_NVS_I2C6 6
-#define LPSS_NVS_I2C7 7
-#define LPSS_NVS_SIO_DMA2 8
-#define LPSS_NVS_SPI 9
-#define LPSS_NVS_PWM1 10
-#define LPSS_NVS_PWM2 11
-#define LPSS_NVS_HSUART1 12
-#define LPSS_NVS_HSUART2 13
-
-#define SCC_NVS_MMC 0
-#define SCC_NVS_SDIO 1
-#define SCC_NVS_SD 2
-
-typedef struct {
- /* Device Enabled in ACPI Mode */
- u8 lpss_en[14];
- u8 scc_en[3];
- u8 lpe_en;
-
- /* BAR 0 */
- u32 lpss_bar0[14];
- u32 scc_bar0[3];
- u32 lpe_bar0;
-
- /* BAR 1 */
- u32 lpss_bar1[14];
- u32 scc_bar1[3];
- u32 lpe_bar1;
-
- /* Extra */
- u32 lpe_fw; /* LPE Firmware */
- u8 rsvd1[3930]; /* Add padding so sizeof(device_nvs_t) == 0x1000 */
-} __packed device_nvs_t;
-
-#endif
diff --git a/src/soc/intel/fsp_baytrail/include/soc/ehci.h b/src/soc/intel/fsp_baytrail/include/soc/ehci.h
deleted file mode 100644
index fe990b7017..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/ehci.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef BAYTRAIL_EHCI_H
-#define BAYTRAIL_EHCI_H
-
-/* EHCI PCI Registers */
-#define EHCI_CMD_STS 0x04
-# define INTRDIS (1 << 10)
-#define EHCI_SBRN_FLA_PWC 0x60
-# define PORTWKIMP (1 << 16)
-# define PORTWKCAPMASK (0x3ff << 17)
-#define EHCI_USB2PDO 0x64
-
-/* EHCI Memory Registers */
-#define USB2CMD 0x20
-# define USB2CMD_ASE (1 << 5)
-# define USB2CMD_PSE (1 << 4)
-# define USB2CMD_HCRESET (1 << 1)
-# define USB2CMD_RS (1 << 0)
-#define USB2STS 0x24
-# define USB2STS_HCHALT (1 << 12)
-
-/* RCBA EHCI Registers */
-#define RCBA_FUNC_DIS 0x220
-# define RCBA_EHCI_DIS (1 << 0)
-
-#endif /* BAYTRAIL_EHCI_H */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/gfx.h b/src/soc/intel/fsp_baytrail/include/soc/gfx.h
deleted file mode 100644
index e7fc8ca604..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/gfx.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_GFX_H_
-#define _BAYTRAIL_GFX_H_
-
-/*
- * PCI config registers.
- */
-
-#define GGC 0x50
-# define GGC_VGA_DISABLE (1 << 1)
-# define GGC_GTT_SIZE_MASK (3 << 8)
-# define GGC_GTT_SIZE_0MB (0 << 8)
-# define GGC_GTT_SIZE_1MB (1 << 8)
-# define GGC_GTT_SIZE_2MB (2 << 8)
-# define GGC_GSM_SIZE_MASK (0x1f << 3)
-# define GGC_GSM_SIZE_0MB (0 << 3)
-# define GGC_GSM_SIZE_32MB (1 << 3)
-# define GGC_GSM_SIZE_64MB (2 << 3)
-# define GGC_GSM_SIZE_128MB (4 << 3)
-
-#define GSM_BASE 0x5c
-#define GTT_BASE 0x70
-
-#define MSAC 0x62
-#define APERTURE_SIZE_MASK (3 << 1)
-#define APERTURE_SIZE_128MB (0 << 1)
-#define APERTURE_SIZE_256MB (1 << 1)
-#define APERTURE_SIZE_512MB (3 << 1)
-
-#endif /* _BAYTRAIL_GFX_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/gpio.h b/src/soc/intel/fsp_baytrail/include/soc/gpio.h
deleted file mode 100644
index 137ec95f14..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/gpio.h
+++ /dev/null
@@ -1,442 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_GPIO_H_
-#define _BAYTRAIL_GPIO_H_
-
-#include <stdint.h>
-#include <device/mmio.h>
-#include <soc/iomap.h>
-
-/* #define GPIO_DEBUG */
-
-/* Pad base, ex. PAD_CONF0[n]= PAD_BASE+16*n */
-#define GPSCORE_PAD_BASE (IO_BASE_ADDRESS + IO_BASE_OFFSET_GPSCORE)
-#define GPNCORE_PAD_BASE (IO_BASE_ADDRESS + IO_BASE_OFFSET_GPNCORE)
-#define GPSSUS_PAD_BASE (IO_BASE_ADDRESS + IO_BASE_OFFSET_GPSSUS)
-
-/* DIRQ registers start at pad base + 0x980 */
-#define PAD_BASE_DIRQ_OFFSET 0x980
-
-/* Pad register offset */
-#define PAD_CONF0_REG 0x0
-#define PAD_CONF1_REG 0x4
-#define PAD_VAL_REG 0x8
-
-/* Legacy IO register base */
-#define GPSCORE_LEGACY_BASE (GPIO_BASE_ADDRESS + 0x00)
-#define GPSSUS_LEGACY_BASE (GPIO_BASE_ADDRESS + 0x80)
-/* Some banks have no legacy GPIO interface */
-#define GP_LEGACY_BASE_NONE 0xFFFF
-
-#define LEGACY_USE_SEL_REG 0x00
-#define LEGACY_IO_SEL_REG 0x04
-#define LEGACY_GP_LVL_REG 0x08
-#define LEGACY_TPE_REG 0x0C
-#define LEGACY_TNE_REG 0x10
-#define LEGACY_TS_REG 0x14
-#define LEGACY_WAKE_EN_REG 0x18
-
-/* Number of GPIOs in each bank */
-#define GPNCORE_COUNT 27
-#define GPSCORE_COUNT 102
-#define GPSSUS_COUNT 44
-
-/* GPIO legacy IO register settings */
-#define GPIO_USE_MMIO 0
-#define GPIO_USE_LEGACY 1
-
-#define GPIO_DIR_OUTPUT 0
-#define GPIO_DIR_INPUT 1
-
-#define GPIO_LEVEL_LOW 0
-#define GPIO_LEVEL_HIGH 1
-
-#define GPIO_PEDGE_DISABLE 0
-#define GPIO_PEDGE_ENABLE 1
-
-#define GPIO_NEDGE_DISABLE 0
-#define GPIO_NEDGE_ENABLE 1
-
-/* config0[29] - Disable second mask */
-#define PAD_MASK2_DISABLE (1 << 29)
-
-/* config0[27] - Direct Irq En */
-#define PAD_IRQ_EN (1 << 27)
-
-/* config0[26] - gd_tne */
-#define PAD_TNE_IRQ (1 << 26)
-
-/* config0[25] - gd_tpe */
-#define PAD_TPE_IRQ (1 << 25)
-
-/* config0[24] - Gd Level */
-#define PAD_LEVEL_IRQ (1 << 24)
-#define PAD_EDGE_IRQ (0 << 24)
-
-/* config0[17] - Slow clkgate / glitch filter */
-#define PAD_SLOWGF_ENABLE (1 << 17)
-
-/* config0[16] - Fast clkgate / glitch filter */
-#define PAD_FASTGF_ENABLE (1 << 16)
-
-/* config0[15] - Hysteresis enable (inverted) */
-#define PAD_HYST_DISABLE (1 << 15)
-#define PAD_HYST_ENABLE (0 << 15)
-
-/* config0[14:13] - Hysteresis control */
-#define PAD_HYST_CTRL_DEFAULT (2 << 13)
-
-/* config0[11] - Bypass Flop */
-#define PAD_FLOP_BYPASS (1 << 11)
-#define PAD_FLOP_ENABLE (0 << 11)
-
-/* config0[10:9] - Pull str */
-#define PAD_PU_2K (0 << 9)
-#define PAD_PU_10K (1 << 9)
-#define PAD_PU_20K (2 << 9)
-#define PAD_PU_40K (3 << 9)
-
-/* config0[8:7] - Pull assign */
-#define PAD_PULL_DISABLE (0 << 7)
-#define PAD_PULL_UP (1 << 7)
-#define PAD_PULL_DOWN (2 << 7)
-
-/* config0[2:0] - Func. pin mux */
-#define PAD_FUNC0 0x0
-#define PAD_FUNC1 0x1
-#define PAD_FUNC2 0x2
-#define PAD_FUNC3 0x3
-#define PAD_FUNC4 0x4
-#define PAD_FUNC5 0x5
-#define PAD_FUNC6 0x6
-
-/* pad config0 power-on values - We will not often want to change these */
-#define PAD_CONFIG0_DEFAULT (PAD_MASK2_DISABLE | PAD_SLOWGF_ENABLE | \
- PAD_FASTGF_ENABLE | PAD_HYST_DISABLE | \
- PAD_HYST_CTRL_DEFAULT | PAD_FLOP_BYPASS)
-
-/* pad config1 reg power-on values - Shouldn't need to change this */
-#define PAD_CONFIG1_DEFAULT 0x8000
-
-/* pad_val[2] - Iinenb - active low */
-#define PAD_VAL_INPUT_DISABLE (1 << 2)
-#define PAD_VAL_INPUT_ENABLE (0 << 2)
-
-/* pad_val[1] - Ioutenb - active low */
-#define PAD_VAL_OUTPUT_DISABLE (1 << 1)
-#define PAD_VAL_OUTPUT_ENABLE (0 << 1)
-
-/* Input / Output state should usually be mutually exclusive */
-#define PAD_VAL_INPUT (PAD_VAL_INPUT_ENABLE | PAD_VAL_OUTPUT_DISABLE)
-#define PAD_VAL_OUTPUT (PAD_VAL_OUTPUT_ENABLE | PAD_VAL_INPUT_DISABLE)
-
-/* pad_val[0] - Value */
-#define PAD_VAL_HIGH (1 << 0)
-#define PAD_VAL_LOW (0 << 0)
-
-/* pad_val reg power-on default varies by pad, and apparently can cause issues
- * if not set correctly, even if the pin isn't configured as GPIO. */
-#define PAD_VAL_DEFAULT PAD_VAL_INPUT
-
-/* Configure GPIOs as MMIO by default */
-#define GPIO_INPUT_PU_10K \
- { .pad_conf0 = PAD_PU_10K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_INPUT, \
- .use_sel = GPIO_USE_MMIO, \
- .is_gpio = 1 }
-
-#define GPIO_INPUT_PD_10K \
- { .pad_conf0 = PAD_PU_10K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_INPUT, \
- .use_sel = GPIO_USE_MMIO, \
- .is_gpio = 1 }
-
-#define GPIO_INPUT_PU_20K \
- { .pad_conf0 = PAD_PU_20K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_INPUT, \
- .use_sel = GPIO_USE_MMIO, \
- .is_gpio = 1 }
-
-#define GPIO_INPUT_PD_20K \
- { .pad_conf0 = PAD_PU_20K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_INPUT, \
- .use_sel = GPIO_USE_MMIO, \
- .is_gpio = 1 }
-
-#define GPIO_INPUT_NOPU \
- { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_INPUT, \
- .use_sel = GPIO_USE_MMIO, \
- .is_gpio = 1 }
-
-#define GPIO_INPUT_LEGACY_NOPU \
- { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_INPUT, \
- .use_sel = GPIO_USE_LEGACY, \
- .io_sel = GPIO_DIR_INPUT, \
- .is_gpio = 1 }
-
-/* Direct / dedicated IRQ input - pass signal directly to apic */
-#define GPIO_DIRQ \
- { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \
- | PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ | PAD_LEVEL_IRQ, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_INPUT, }
-
-#define GPIO_OUT_LOW_LEGACY \
- { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_OUTPUT | PAD_VAL_LOW, \
- .use_sel = GPIO_USE_LEGACY, \
- .io_sel = GPIO_DIR_OUTPUT, \
- .gp_lvl = GPIO_LEVEL_LOW, \
- .is_gpio = 1 }
-
-#define GPIO_OUT_HIGH_LEGACY \
- { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_OUTPUT | PAD_VAL_HIGH, \
- .use_sel = GPIO_USE_LEGACY, \
- .io_sel = GPIO_DIR_OUTPUT, \
- .gp_lvl = GPIO_LEVEL_HIGH, \
- .is_gpio = 1 }
-
-#define GPIO_OUT_LOW \
- { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_OUTPUT | PAD_VAL_LOW, \
- .use_sel = GPIO_USE_MMIO, \
- .io_sel = GPIO_DIR_OUTPUT, \
- .gp_lvl = GPIO_LEVEL_LOW, \
- .is_gpio = 1 }
-
-#define GPIO_OUT_HIGH \
- { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_OUTPUT | PAD_VAL_HIGH, \
- .use_sel = GPIO_USE_MMIO, \
- .io_sel = GPIO_DIR_OUTPUT, \
- .gp_lvl = GPIO_LEVEL_HIGH, \
- .is_gpio = 1 }
-
-/* Define no-pull / PU / PD configs for each functional config option */
-#define GPIO_FUNC(_func, _pudir, _str) \
- { .use_sel = GPIO_USE_MMIO, \
- .pad_conf0 = PAD_FUNC##_func | PAD_##_pudir | PAD_PU_##_str | \
- PAD_CONFIG0_DEFAULT, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_DEFAULT }
-
-/* Default functional configs -- no PU */
-#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 20K)
-#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 20K)
-#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 20K)
-#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 20K)
-#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 20K)
-#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 20K)
-#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 20K)
-
-/* ACPI GPIO routing. Assume everything is externally pulled and negative edge
- * triggered. SCI implies WAKE, but WAKE doesn't imply SCI. */
-#define GPIO_ACPI_SCI \
- { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT | PAD_FUNC0, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_INPUT, \
- .use_sel = GPIO_USE_LEGACY, \
- .io_sel = GPIO_DIR_INPUT, \
- .tne = 1, \
- .sci = 1, \
- .wake_en = 1, }
-#define GPIO_ACPI_WAKE \
- { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT | PAD_FUNC0, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_INPUT, \
- .use_sel = GPIO_USE_LEGACY, \
- .io_sel = GPIO_DIR_INPUT, \
- .tne = 1, \
- .wake_en = 1, }
-#define GPIO_ACPI_SMI \
- { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT | PAD_FUNC0, \
- .pad_conf1 = PAD_CONFIG1_DEFAULT, \
- .pad_val = PAD_VAL_INPUT, \
- .use_sel = GPIO_USE_LEGACY, \
- .io_sel = GPIO_DIR_INPUT, \
- .tne = 1, \
- .smi = 1}
-
-/* End marker */
-#define GPIO_LIST_END 0xffffffff
-
-#define GPIO_END \
- { .pad_conf0 = GPIO_LIST_END }
-
-/* Common default GPIO settings */
-#define GPIO_INPUT GPIO_INPUT_NOPU
-#define GPIO_INPUT_LEGACY GPIO_INPUT_LEGACY_NOPU
-#define GPIO_INPUT_PU GPIO_INPUT_PU_20K
-#define GPIO_INPUT_PD GPIO_INPUT_PD_20K
-#define GPIO_NC GPIO_INPUT_PU_20K
-#define GPIO_DEFAULT GPIO_FUNC0
-
-/* 16 DirectIRQs per supported bank */
-#define GPIO_MAX_DIRQS 16
-
-/* Most pins are GPIO function 0. Some banks have a range of pins with GPIO
- * function 1. Indicate first / last GPIOs with function 1. */
-#define GPIO_NONE 255
-/* All NCORE GPIOs are function 0 */
-#define GPNCORE_GPIO_F1_RANGE_START GPIO_NONE
-#define GPNCORE_GPIO_F1_RANGE_END GPIO_NONE
-/* SCORE GPIO [92:93] are function 1 */
-#define GPSCORE_GPIO_F1_RANGE_START 92
-#define GPSCORE_GPIO_F1_RANGE_END 93
-/* SSUS GPIO [11:21] are function 1 */
-#define GPSSUS_GPIO_F1_RANGE_START 11
-#define GPSSUS_GPIO_F1_RANGE_END 21
-
-struct soc_gpio_map {
- u32 pad_conf0;
- u32 pad_conf1;
- u32 pad_val;
- u32 use_sel : 1;
- u32 io_sel : 1;
- u32 gp_lvl : 1;
- u32 tpe : 1;
- u32 tne : 1;
- u32 wake_en : 1;
- u32 smi : 1;
- u32 is_gpio : 1;
- u32 sci : 1;
-} __packed;
-
-struct soc_gpio_config {
- const struct soc_gpio_map *ncore;
- const struct soc_gpio_map *score;
- const struct soc_gpio_map *ssus;
- const u8 (*core_dirq)[GPIO_MAX_DIRQS];
- const u8 (*sus_dirq)[GPIO_MAX_DIRQS];
-};
-
-/* Description of GPIO 'bank' ex. {ncore, score. ssus} */
-struct gpio_bank {
- const int gpio_count;
- const u8 *gpio_to_pad;
- const int legacy_base;
- const unsigned long pad_base;
- const u8 has_wake_en :1;
- const u8 gpio_f1_range_start;
- const u8 gpio_f1_range_end;
-};
-
-void smm_southcluster_save_gpio_route(uint32_t route);
-void setup_soc_gpios(struct soc_gpio_config *config);
-/* This function is weak and can be overridden by a mainboard function. */
-struct soc_gpio_config* mainboard_get_gpios(void);
-uint8_t read_score_gpio(uint8_t gpio_num);
-void write_score_gpio(uint8_t gpio_num, uint8_t val);
-uint8_t read_ssus_gpio(uint8_t gpio_num);
-void write_ssus_gpio(uint8_t gpio_num, uint8_t val);
-void configure_ssus_gpio(uint8_t gpio_num, uint32_t pconf0, uint32_t pad_val);
-void configure_score_gpio(uint8_t gpio_num, uint32_t pconf0, uint32_t pad_val);
-
-/* Functions / defines for changing GPIOs in romstage */
-/* SCORE Pad definitions. */
-#define UART_RXD_PAD 82
-#define UART_TXD_PAD 83
-#define PCU_SMB_CLK_PAD 88
-#define PCU_SMB_DATA_PAD 90
-
-static inline uint32_t *score_pconf0(int pad_num)
-{
- return (uint32_t *)(GPSCORE_PAD_BASE + pad_num * 16);
-}
-
-static inline uint32_t *ssus_pconf0(int pad_num)
-{
- return (uint32_t *)(GPSSUS_PAD_BASE + pad_num * 16);
-}
-
-static inline void score_select_func(int pad, int func)
-{
- uint32_t reg;
- uint32_t *pconf0_addr = score_pconf0(pad);
-
- reg = read32(pconf0_addr);
- reg &= ~0x7;
- reg |= func & 0x7;
- write32(pconf0_addr, reg);
-}
-
-static inline void ssus_select_func(int pad, int func)
-{
- uint32_t reg;
- uint32_t *pconf0_addr = ssus_pconf0(pad);
-
- reg = read32(pconf0_addr);
- reg &= ~0x7;
- reg |= func & 0x7;
- write32(pconf0_addr, reg);
-}
-
-
-/* These functions require that the input pad be configured as an input GPIO */
-static inline int score_get_gpio(int pad)
-{
- uint32_t *val_addr = score_pconf0(pad) + (PAD_VAL_REG/sizeof(uint32_t));
-
- return read32(val_addr) & PAD_VAL_HIGH;
-}
-
-static inline int ssus_get_gpio(int pad)
-{
- uint32_t *val_addr = ssus_pconf0(pad) + (PAD_VAL_REG/sizeof(uint32_t));
-
- return read32(val_addr) & PAD_VAL_HIGH;
-}
-
-/* These functions require that the output pad is configured as an output */
-/* GPIO and is mapped to memory space and not IO space. */
-static inline void score_set_gpio(int pad, int val)
-{
- uint32_t *val_addr = score_pconf0(pad) + (PAD_VAL_REG/sizeof(uint32_t));
-
- write32(val_addr, ((read32(val_addr) & ~0x1) | val));
-}
-
-static inline void ssus_set_gpio(int pad, int val)
-{
- uint32_t *val_addr = ssus_pconf0(pad) + (PAD_VAL_REG/sizeof(uint32_t));
-
- write32(val_addr, ((read32(val_addr) & ~0x1) | val));
-}
-
-static inline void ssus_disable_internal_pull(int pad)
-{
- uint32_t reg;
- uint32_t *pconf0_addr = ssus_pconf0(pad);
-
- reg = read32(pconf0_addr);
- reg &= ~(0xf << 7);
- write32(pconf0_addr, reg);
-}
-
-#endif /* _BAYTRAIL_GPIO_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/i2c.h b/src/soc/intel/fsp_baytrail/include/soc/i2c.h
deleted file mode 100644
index 3a4ff2c32b..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/i2c.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2014-2019 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __SOC_INTEL_FSP_BAYTRAIL_I2C_H__
-#define __SOC_INTEL_FSP_BAYTRAIL_I2C_H__
-
-#define I2C_SOFTWARE_RESET 0x804
-#define I2C_RESET_APB (1 << 1)
-#define I2C_RESET_FUNC (1 << 0)
-
-#endif /* __SOC_INTEL_FSP_BAYTRAIL_I2C_H__ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/iomap.h b/src/soc/intel/fsp_baytrail/include/soc/iomap.h
deleted file mode 100644
index d54d3fcc29..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/iomap.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_IOMAP_H_
-#define _BAYTRAIL_IOMAP_H_
-
-/*
- * Memory Mapped IO bases.
- */
-
-/* PCI Configuration Space */
-#define MCFG_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS
-#define MCFG_BASE_SIZE 0x10000000
-
-/* Transactions in this range will abort */
-#define ABORT_BASE_ADDRESS 0xfeb00000
-#define ABORT_BASE_SIZE 0x00100000
-
-/* Power Management Controller */
-#define PMC_BASE_ADDRESS 0xfed03000
-#define PMC_BASE_SIZE 0x400
-
-/* IO Memory */
-#define IO_BASE_ADDRESS 0xfed0c000
-#define IO_BASE_OFFSET_GPSCORE 0x0000
-#define IO_BASE_OFFSET_GPNCORE 0x1000
-#define IO_BASE_OFFSET_GPSSUS 0x2000
-#define IO_BASE_SIZE 0x4000
-
-/* Intel Legacy Block */
-#define ILB_BASE_ADDRESS 0xfed08000
-#define ILB_BASE_SIZE 0x400
-
-/* SPI Bus */
-#define SPI_BASE_ADDRESS 0xfed01000
-#define SPI_BASE_SIZE 0x400
-
-/* MODPHY */
-#define MPHY_BASE_ADDRESS 0xfef00000
-#define MPHY_BASE_SIZE 0x100000
-
-/* Power Management Unit */
-#define PUNIT_BASE_ADDRESS 0xfed05000
-#define PUNIT_BASE_SIZE 0x800
-
-/* Root Complex Base Address */
-#define RCBA_BASE_ADDRESS 0xfed1c000
-#define RCBA_BASE_SIZE 0x400
-
-/* High Performance Event Timer */
-#define HPET_BASE_ADDRESS 0xfed00000
-#define HPET_BASE_SIZE 0x400
-
-/* Temporary Base Address */
-#define TEMP_BASE_ADDRESS 0xfd000000
-#define EARLY_I2C_BASE_ADDRESS 0xfe020000
-#define EARLY_I2C_BASE(x) (EARLY_I2C_BASE_ADDRESS + (0x2000 * (x)))
-
-/*
- * IO Port bases.
- */
-#define ACPI_BASE_ADDRESS 0x0400
-#define ACPI_BASE_SIZE 0x80
-
-#define GPIO_BASE_ADDRESS 0x0500
-#define GPIO_BASE_SIZE 0x100
-
-#define SMBUS_BASE_ADDRESS 0xefa0
-
-#ifndef __ACPI__
-#include <stdint.h>
-
-/* Read Top of Low Memory (BMBOUND) */
-uint32_t nc_read_top_of_low_memory(void);
-#endif
-
-#endif /* _BAYTRAIL_IOMAP_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/iosf.h b/src/soc/intel/fsp_baytrail/include/soc/iosf.h
deleted file mode 100644
index 0982da68db..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/iosf.h
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google, Inc.
- * Copyright (C) 2016 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_IOSF_H_
-#define _BAYTRAIL_IOSF_H_
-
-#include <stdint.h>
-#include <soc/pci_devs.h>
-
-/*
- * The Bay Trail SoC has a message network called IOSF Sideband. The access
- * routines are through 3 registers in PCI config space of 00:00.0:
- * MCR - control register
- * MDR - data register
- * MCRX - control register extension
- * The extension register is only used for addresses that don't fit into the
- * 8 bit register address.
- */
-
-#ifndef PCI_DEV
-#define PCI_DEV(SEGBUS, DEV, FN) ( \
- (((SEGBUS) & 0xFFF) << 20) | \
- (((DEV) & 0x1F) << 15) | \
- (((FN) & 0x07) << 12))
-#endif
-#define IOSF_PCI_DEV PCI_DEV(0,SOC_DEV,SOC_FUNC)
-
-#define MCR_REG 0xd0
-#define IOSF_OPCODE(x) ((x) << 24)
-#define IOSF_PORT(x) ((0xff & (x)) << 16)
-#define IOSF_REG(x) ((0xff & (x)) << 8)
-#define IOSF_REG_UPPER(x) (((~0xff) & (x)))
-#define IOSF_BYTE_EN_0 0x10
-#define IOSF_BYTE_EN_1 0x20
-#define IOSF_BYTE_EN_2 0x40
-#define IOSF_BYTE_EN_3 0x80
-#define IOSF_BYTE_EN \
- (IOSF_BYTE_EN_0 | IOSF_BYTE_EN_1 | IOSF_BYTE_EN_2 | IOSF_BYTE_EN_3)
-#define MDR_REG 0xd4
-#define MCRX_REG 0xd8
-
-uint32_t iosf_aunit_read(int reg);
-void iosf_aunit_write(int reg, uint32_t val);
-uint32_t iosf_cpu_bus_read(int reg);
-void iosf_cpu_bus_write(int reg, uint32_t val);
-uint32_t iosf_bunit_read(int reg);
-void iosf_bunit_write(int reg, uint32_t val);
-uint32_t iosf_dunit_read(int reg);
-void iosf_dunit_write(int reg, uint32_t val);
-/* Some registers are per channel while the globals live in dunit 0 */
-uint32_t iosf_dunit_ch0_read(int reg);
-uint32_t iosf_dunit_ch1_read(int reg);
-uint32_t iosf_punit_read(int reg);
-void iosf_punit_write(int reg, uint32_t val);
-uint32_t iosf_usbphy_read(int reg);
-void iosf_usbphy_write(int reg, uint32_t val);
-uint32_t iosf_ushphy_read(int reg);
-void iosf_ushphy_write(int reg, uint32_t val);
-uint32_t iosf_sec_read(int reg);
-void iosf_sec_write(int reg, uint32_t val);
-uint32_t iosf_port45_read(int reg);
-void iosf_port45_write(int reg, uint32_t val);
-uint32_t iosf_port46_read(int reg);
-void iosf_port46_write(int reg, uint32_t val);
-uint32_t iosf_port47_read(int reg);
-void iosf_port47_write(int reg, uint32_t val);
-uint32_t iosf_port55_read(int reg);
-void iosf_port55_write(int reg, uint32_t val);
-uint32_t iosf_port58_read(int reg);
-void iosf_port58_write(int reg, uint32_t val);
-uint32_t iosf_port59_read(int reg);
-void iosf_port59_write(int reg, uint32_t val);
-uint32_t iosf_port5a_read(int reg);
-void iosf_port5a_write(int reg, uint32_t val);
-uint32_t iosf_lpss_read(int reg);
-void iosf_lpss_write(int reg, uint32_t val);
-uint32_t iosf_ccu_read(int reg);
-void iosf_ccu_write(int reg, uint32_t val);
-uint32_t iosf_score_read(int reg);
-void iosf_score_write(int reg, uint32_t val);
-uint32_t iosf_scc_read(int reg);
-void iosf_scc_write(int reg, uint32_t val);
-uint32_t iosf_porta2_read(int reg);
-void iosf_porta2_write(int reg, uint32_t val);
-uint32_t iosf_ssus_read(int reg);
-void iosf_ssus_write(int reg, uint32_t val);
-
-/* IOSF ports. */
-#define IOSF_PORT_AUNIT 0x00 /* IO Arbiter unit */
-#define IOSF_PORT_SYSMEMC 0x01 /* System Memory Controller */
-#define IOSF_PORT_DUNIT_CH0 0x07 /* DUNIT Channel 0 */
-#define IOSF_PORT_CPU_BUS 0x02 /* CPU Bus Interface Controller */
-#define IOSF_PORT_BUNIT 0x03 /* System Memory Arbiter/Bunit */
-#define IOSF_PORT_PMC 0x04 /* Power Management Controller */
-#define IOSF_PORT_GFX 0x06 /* Graphics Adapter */
-#define IOSF_PORT_DUNIT_CH1 0x07 /* DUNIT Channel 1 */
-#define IOSF_PORT_SYSMEMIO 0x0c /* System Memory IO */
-#define IOSF_PORT_USBPHY 0x43 /* USB PHY */
-#define IOSF_PORT_SEC 0x44 /* SEC */
-#define IOSF_PORT_0x45 0x45
-#define IOSF_PORT_0x46 0x46
-#define IOSF_PORT_0x47 0x47
-#define IOSF_PORT_SCORE 0x48 /* SCORE */
-#define IOSF_PORT_0x55 0x55
-#define IOSF_PORT_0x58 0x58
-#define IOSF_PORT_0x59 0x59
-#define IOSF_PORT_0x5a 0x5a
-#define IOSF_PORT_USHPHY 0x61 /* USB XHCI PHY */
-#define IOSF_PORT_SCC 0x63 /* Storage Control Cluster */
-#define IOSF_PORT_LPSS 0xa0 /* LPSS - Low Power Subsystem */
-#define IOSF_PORT_0xa2 0xa2
-#define IOSF_PORT_SATAPHY 0xa3 /* SATA PHY */
-#define IOSF_PORT_PCIEPHY 0xa3 /* PCIE PHY */
-#define IOSF_PORT_SSUS 0xa8 /* SUS */
-#define IOSF_PORT_CCU 0xa9 /* Clock control unit. */
-
-/* Read and write opcodes differ per port. */
-#define IOSF_OP_READ_AUNIT 0x10
-#define IOSF_OP_WRITE_AUNIT (IOSF_OP_READ_AUNIT | 1)
-#define IOSF_OP_READ_SYSMEMC 0x10
-#define IOSF_OP_WRITE_SYSMEMC (IOSF_OP_READ_SYSMEMC | 1)
-#define IOSF_OP_READ_CPU_BUS 0x10
-#define IOSF_OP_WRITE_CPU_BUS (IOSF_OP_READ_CPU_BUS | 1)
-#define IOSF_OP_READ_BUNIT 0x10
-#define IOSF_OP_WRITE_BUNIT (IOSF_OP_READ_BUNIT | 1)
-#define IOSF_OP_READ_PMC 0x06
-#define IOSF_OP_WRITE_PMC (IOSF_OP_READ_PMC | 1)
-#define IOSF_OP_READ_GFX 0x00
-#define IOSF_OP_WRITE_GFX (IOSF_OP_READ_GFX | 1)
-#define IOSF_OP_READ_SYSMEMIO 0x06
-#define IOSF_OP_WRITE_SYSMEMIO (IOSF_OP_READ_SYSMEMIO | 1)
-#define IOSF_OP_READ_USBPHY 0x06
-#define IOSF_OP_WRITE_USBPHY (IOSF_OP_READ_USBPHY | 1)
-#define IOSF_OP_READ_SEC 0x04
-#define IOSF_OP_WRITE_SEC (IOSF_OP_READ_SEC | 1)
-#define IOSF_OP_READ_0x45 0x06
-#define IOSF_OP_WRITE_0x45 (IOSF_OP_READ_0x45 | 1)
-#define IOSF_OP_READ_0x46 0x06
-#define IOSF_OP_WRITE_0x46 (IOSF_OP_READ_0x46 | 1)
-#define IOSF_OP_READ_0x47 0x06
-#define IOSF_OP_WRITE_0x47 (IOSF_OP_READ_0x47 | 1)
-#define IOSF_OP_READ_SCORE 0x06
-#define IOSF_OP_WRITE_SCORE (IOSF_OP_READ_SCORE | 1)
-#define IOSF_OP_READ_0x55 0x04
-#define IOSF_OP_WRITE_0x55 (IOSF_OP_READ_0x55 | 1)
-#define IOSF_OP_READ_0x58 0x06
-#define IOSF_OP_WRITE_0x58 (IOSF_OP_READ_0x58 | 1)
-#define IOSF_OP_READ_0x59 0x06
-#define IOSF_OP_WRITE_0x59 (IOSF_OP_READ_0x59 | 1)
-#define IOSF_OP_READ_0x5a 0x04
-#define IOSF_OP_WRITE_0x5a (IOSF_OP_READ_0x5a | 1)
-#define IOSF_OP_READ_USHPHY 0x06
-#define IOSF_OP_WRITE_USHPHY (IOSF_OP_READ_USHPHY | 1)
-#define IOSF_OP_READ_SCC 0x06
-#define IOSF_OP_WRITE_SCC (IOSF_OP_READ_SCC | 1)
-#define IOSF_OP_READ_LPSS 0x06
-#define IOSF_OP_WRITE_LPSS (IOSF_OP_READ_LPSS | 1)
-#define IOSF_OP_READ_0xa2 0x06
-#define IOSF_OP_WRITE_0xa2 (IOSF_OP_READ_0xa2 | 1)
-#define IOSF_OP_READ_SATAPHY 0x00
-#define IOSF_OP_WRITE_SATAPHY (IOSF_OP_READ_SATAPHY | 1)
-#define IOSF_OP_READ_PCIEPHY 0x00
-#define IOSF_OP_WRITE_PCIEPHY (IOSF_OP_READ_PCIEPHY | 1)
-#define IOSF_OP_READ_SSUS 0x10
-#define IOSF_OP_WRITE_SSUS (IOSF_OP_READ_SSUS | 1)
-#define IOSF_OP_READ_CCU 0x06
-#define IOSF_OP_WRITE_CCU (IOSF_OP_READ_CCU | 1)
-
-/*
- * BUNIT Registers.
- */
-
-#define BNOCACHE 0x23
-/* BMBOUND has a 128MiB granularity. Highest address is 0xf8000000. */
-#define BUNIT_BMBOUND 0x25
-/* BMBOUND_HI describes the available RAM above 4GiB. It has a
- * 256MiB granularity. Physical address bits 35:28 are compared with 31:24
- * bits in the BMBOUND_HI register. Also note that since BMBOUND has 128MiB
- * granularity care needs to be taken with the e820 map to account for a hole
- * in the RAM. */
-#define BUNIT_BMBOUND_HI 0x26
-#define BUNIT_MMCONF_REG 0x27
-/* The SMMRR registers define the SMM region in MiB granularity. */
-#define BUNIT_SMRCP 0x2b
-#define BUNIT_SMRRAC 0x2c
-#define BUNIT_SMRWAC 0x2d
-#define BUNIT_SMRRL 0x2e
-#define BUNIT_SMRRH 0x2f
-# define BUNIT_SMRR_ENABLE (1 << 31)
-
-/* SA ID bits. */
-#define SAI_IA_UNTRUSTED (1 << 0)
-#define SAI_IA_SMM (1 << 2)
-#define SAI_IA_BOOT (1 << 4)
-
-/*
- * DUNIT Registers.
- */
-
-#define DRP 0x00
-# define DRP_DIMM0_RANK0_EN (0x01 << 0)
-# define DRP_DIMM0_RANK1_EN (0x01 << 1)
-# define DRP_DIMM1_RANK0_EN (0x01 << 2)
-# define DRP_DIMM1_RANK1_EN (0x01 << 3)
-# define DRP_RANK_MASK (DRP_DIMM0_RANK0_EN | DRP_DIMM0_RANK1_EN | \
- DRP_DIMM1_RANK0_EN | DRP_DIMM1_RANK1_EN)
-#define DTR0 0x01
-# define DTR0_SPEED_MASK 0x03
-# define DTR0_SPEED_800 0x00
-# define DTR0_SPEED_1066 0x01
-# define DTR0_SPEED_1333 0x02
-# define DTR0_SPEED_1600 0x03
-
-/*
- * PUNIT Registers
- */
-#define SB_BIOS_CONFIG 0x06
-# define SB_BIOS_CONFIG_ECC_EN (1 << 31)
-# define SB_BIOS_CONFIG_DUAL_CH_DIS (1 << 30)
-# define SB_BIOS_CONFIG_EFF_ECC (1 << 29)
-# define SB_BIOS_CONFIG_EFF_DUAL_CH_DIS (1 << 28)
-# define SB_BIOS_CONFIG_PERF_MODE (1 << 17)
-# define SB_BIOS_CONFIG_PDM_MODE (1 << 16)
-# define SB_BIOS_CONFIG_DDRIO_PWRGATE (1 << 8)
-# define SB_BIOS_CONFIG_GFX_TURBO_DIS (1 << 7)
-# define SB_BIOS_CONFIG_PS2_EN_VNN (1 << 3)
-# define SB_BIOS_CONFIG_PS2_EN_VCC (1 << 2)
-# define SB_BIOS_CONFIG_PCIE_PLLOFFOK (1 << 1)
-# define SB_BIOS_CONFIG_USB_CACHING_EN (1 << 0)
-#define BIOS_RESET_CPL 0x05
-# define BIOS_RESET_CPL_ALL_DONE (1 << 1)
-# define BIOS_RESET_CPL_RESET_DONE (1 << 0)
-#define PUNIT_PWRGT_CONTROL 0x60
-#define PUNIT_PWRGT_STATUS 0x61
-#define PUNIT_GPU_EC_VIRUS 0xd2
-
-#define PUNIT_SOC_POWER_BUDGET 0x02
-#define PUNIT_SOC_ENERGY_CREDIT 0x03
-#define PUNIT_PTMC 0x80
-#define PUNIT_GFXT 0x88
-#define PUNIT_VEDT 0x89
-#define PUNIT_ISPT 0x8c
-#define PUNIT_PTPS 0xb2
-#define PUNIT_TE_AUX0 0xb5
-#define PUNIT_TE_AUX1 0xb6
-#define PUNIT_TE_AUX2 0xb7
-#define PUNIT_TE_AUX3 0xb8
-#define PUNIT_TTE_VRIccMax 0xb9
-#define PUNIT_TTE_VRHot 0xba
-#define PUNIT_TTE_XXPROCHOT 0xbb
-#define PUNIT_TTE_SLM0 0xbc
-#define PUNIT_TTE_SLM1 0xbd
-#define PUNIT_TTE_SWT 0xbf
-
-/*
- * LPSS Registers
- */
-#define LPSS_SIO_DMA1_CTL 0x280
-#define LPSS_I2C1_CTL 0x288
-#define LPSS_I2C2_CTL 0x290
-#define LPSS_I2C3_CTL 0x298
-#define LPSS_I2C4_CTL 0x2a0
-#define LPSS_I2C5_CTL 0x2a8
-#define LPSS_I2C6_CTL 0x2b0
-#define LPSS_I2C7_CTL 0x2b8
-#define LPSS_SIO_DMA2_CTL 0x240
-#define LPSS_PWM1_CTL 0x248
-#define LPSS_PWM2_CTL 0x250
-#define LPSS_HSUART1_CTL 0x258
-#define LPSS_HSUART2_CTL 0x260
-#define LPSS_SPI_CTL 0x268
-# define LPSS_CTL_ACPI_INT_EN (1 << 21)
-# define LPSS_CTL_PCI_CFG_DIS (1 << 20)
-# define LPSS_CTL_SNOOP (1 << 18)
-# define LPSS_CTL_NOSNOOP (1 << 19)
-# define LPSS_CTL_PM_CAP_PRSNT (1 << 1)
-
-/*
- * SCC Registers
- */
-#define SCC_SD_CTL 0x504
-#define SCC_SDIO_CTL 0x508
-#define SCC_MMC_CTL 0x50c
-# define SCC_CTL_PCI_CFG_DIS (1 << 0)
-# define SCC_CTL_ACPI_INT_EN (1 << 1)
-
-/*
- * CCU Registers
- */
-
-#define PLT_CLK_CTRL_0 0x3c
-#define PLT_CLK_CTRL_1 0x40
-#define PLT_CLK_CTRL_2 0x44
-#define PLT_CLK_CTRL_3 0x48
-#define PLT_CLK_CTRL_4 0x4c
-#define PLT_CLK_CTRL_5 0x50
-# define PLT_CLK_CTRL_19P2MHZ_FREQ (0 << 1)
-# define PLT_CLK_CTRL_25MHZ_FREQ (1 << 1)
-# define PLT_CLK_CTRL_SELECT_FREQ (1 << 0)
-
-/*
- * USBPHY Registers
- */
-#define USBPHY_COMPBG 0x7f04
-#define USBPHY_PER_PORT_LANE0 0x4100
-#define USBPHY_PER_PORT_RCOMP_HS_PULLUP0 0x4122
-#define USBPHY_PER_PORT_LANE1 0x4200
-#define USBPHY_PER_PORT_RCOMP_HS_PULLUP1 0x4222
-#define USBPHY_PER_PORT_LANE2 0x4300
-#define USBPHY_PER_PORT_RCOMP_HS_PULLUP2 0x4322
-#define USBPHY_PER_PORT_LANE3 0x4400
-#define USBPHY_PER_PORT_RCOMP_HS_PULLUP3 0x4422
-
-/*
- * USHPHY Registers
- */
-#define USHPHY_CDN_PLL_CONTROL 0x03c0
-#define USHPHY_CDN_VCO_START_CAL_POINT 0x0054
-#define USHPHY_CCDRLF 0x8040
-#define USHPHY_PEAKING_AMP_CONFIG_DIAG 0x80a8
-#define USHPHY_OFFSET_COR_CONFIG_DIAG 0x80b0
-#define USHPHY_VGA_GAIN_CONFIG_DIAG 0x8080
-#define USHPHY_REE_DAC_CONTROL 0x80b8
-#define USHPHY_CDN_U1_POWER_STATE_DEF 0x0000
-
-/*
- * LPE Registers
- */
-#define LPE_PCICFGCTR1 0x0500
-# define LPE_PCICFGCTR1_PCI_CFG_DIS (1 << 0)
-# define LPE_PCICFGCTR1_ACPI_INT_EN (1 << 1)
-
-#endif /* _BAYTRAIL_IOSF_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/irq.h b/src/soc/intel/fsp_baytrail/include/soc/irq.h
deleted file mode 100644
index de8fc03cde..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/irq.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_IRQ_H_
-#define _BAYTRAIL_IRQ_H_
-
-#define PIRQA_APIC_IRQ 16
-#define PIRQB_APIC_IRQ 17
-#define PIRQC_APIC_IRQ 18
-#define PIRQD_APIC_IRQ 19
-#define PIRQE_APIC_IRQ 20
-#define PIRQF_APIC_IRQ 21
-#define PIRQG_APIC_IRQ 22
-#define PIRQH_APIC_IRQ 23
-/* The below IRQs are for when devices are in ACPI mode. Active low. */
-#define LPE_DMA0_IRQ 24
-#define LPE_DMA1_IRQ 25
-#define LPE_SSP0_IRQ 26
-#define LPE_SSP1_IRQ 27
-#define LPE_SSP2_IRQ 28
-#define LPE_IPC2HOST_IRQ 29
-#define LPSS_I2C1_IRQ 32
-#define LPSS_I2C2_IRQ 33
-#define LPSS_I2C3_IRQ 34
-#define LPSS_I2C4_IRQ 35
-#define LPSS_I2C5_IRQ 36
-#define LPSS_I2C6_IRQ 37
-#define LPSS_I2C7_IRQ 38
-#define LPSS_HSUART1_IRQ 39
-#define LPSS_HSUART2_IRQ 40
-#define LPSS_SPI_IRQ 41
-#define LPSS_DMA1_IRQ 42
-#define LPSS_DMA2_IRQ 43
-#define SCC_EMMC_IRQ 44
-#define SCC_SDIO_IRQ 46
-#define SCC_SD_IRQ 47
-#define GPIO_NC_IRQ 48
-#define GPIO_SC_IRQ 49
-#define GPIO_SUS_IRQ 50
-/* GPIO direct / dedicated IRQs. */
-#define GPIO_S0_DED_IRQ_0 51
-#define GPIO_S0_DED_IRQ_1 52
-#define GPIO_S0_DED_IRQ_2 53
-#define GPIO_S0_DED_IRQ_3 54
-#define GPIO_S0_DED_IRQ_4 55
-#define GPIO_S0_DED_IRQ_5 56
-#define GPIO_S0_DED_IRQ_6 57
-#define GPIO_S0_DED_IRQ_7 58
-#define GPIO_S0_DED_IRQ_8 59
-#define GPIO_S0_DED_IRQ_9 60
-#define GPIO_S0_DED_IRQ_10 61
-#define GPIO_S0_DED_IRQ_11 62
-#define GPIO_S0_DED_IRQ_12 63
-#define GPIO_S0_DED_IRQ_13 64
-#define GPIO_S0_DED_IRQ_14 65
-#define GPIO_S0_DED_IRQ_15 66
-#define GPIO_S5_DED_IRQ_0 67
-#define GPIO_S5_DED_IRQ_1 68
-#define GPIO_S5_DED_IRQ_2 69
-#define GPIO_S5_DED_IRQ_3 70
-#define GPIO_S5_DED_IRQ_4 71
-#define GPIO_S5_DED_IRQ_5 72
-#define GPIO_S5_DED_IRQ_6 73
-#define GPIO_S5_DED_IRQ_7 74
-#define GPIO_S5_DED_IRQ_8 75
-#define GPIO_S5_DED_IRQ_9 76
-#define GPIO_S5_DED_IRQ_10 77
-#define GPIO_S5_DED_IRQ_11 78
-#define GPIO_S5_DED_IRQ_12 79
-#define GPIO_S5_DED_IRQ_13 80
-#define GPIO_S5_DED_IRQ_14 81
-#define GPIO_S5_DED_IRQ_15 82
-/* DIRQs - Two levels of expansion to evaluate to numeric constants for ASL. */
-#define _GPIO_S0_DED_IRQ(slot) GPIO_S0_DED_IRQ_##slot
-#define _GPIO_S5_DED_IRQ(slot) GPIO_S5_DED_IRQ_##slot
-#define GPIO_S0_DED_IRQ(slot) _GPIO_S0_DED_IRQ(slot)
-#define GPIO_S5_DED_IRQ(slot) _GPIO_S5_DED_IRQ(slot)
-
-/* PIC IRQ settings. */
-#define PIRQ_PIC_IRQ3 0x3
-#define PIRQ_PIC_IRQ4 0x4
-#define PIRQ_PIC_IRQ5 0x5
-#define PIRQ_PIC_IRQ6 0x6
-#define PIRQ_PIC_IRQ7 0x7
-#define PIRQ_PIC_IRQ9 0x9
-#define PIRQ_PIC_IRQ10 0xa
-#define PIRQ_PIC_IRQ11 0xb
-#define PIRQ_PIC_IRQ12 0xc
-#define PIRQ_PIC_IRQ14 0xe
-#define PIRQ_PIC_IRQ15 0xf
-#define PIRQ_PIC_IRQDISABLE 0x80
-#define PIRQ_PIC_UNKNOWN_UNUSED 0xff
-
-/* Overloaded term, but these values determine the per device route. */
-#define PIRQA 0
-#define PIRQB 1
-#define PIRQC 2
-#define PIRQD 3
-#define PIRQE 4
-#define PIRQF 5
-#define PIRQG 6
-#define PIRQH 7
-
-/* These registers live behind the ILB_BASE_ADDRESS */
-#define ACTL 0x00
-# define SCIS_MASK 0x07
-# define SCIS_IRQ9 0x00
-# define SCIS_IRQ10 0x01
-# define SCIS_IRQ11 0x02
-# define SCIS_IRQ20 0x04
-# define SCIS_IRQ21 0x05
-# define SCIS_IRQ22 0x06
-# define SCIS_IRQ23 0x07
-
-/* In each mainboard directory there should exist a header file irqroute.h that
- * defines the PCI_DEV_PIRQ_ROUTES and PIRQ_PIC_ROUTES macros which
- * consist of PCI_DEV_PIRQ_ROUTE and PIRQ_PIC entries. */
-
-#if !defined(__ASSEMBLER__) && !defined(__ACPI__)
-#include <stdint.h>
-
-#define NUM_OF_PCI_DEVS 32
-#define NUM_PIRQS 8
-
-struct baytrail_irq_route {
- /* Per device configuration. */
- uint16_t pcidev[NUM_OF_PCI_DEVS];
- /* Route path for each internal PIRQx in PIC mode. */
- uint8_t pic[NUM_PIRQS];
-};
-
-extern const struct baytrail_irq_route global_baytrail_irq_route;
-
-#define DEFINE_IRQ_ROUTES \
- const struct baytrail_irq_route global_baytrail_irq_route = { \
- .pcidev = { PCI_DEV_PIRQ_ROUTES, }, \
- .pic = { PIRQ_PIC_ROUTES, }, \
- }
-
-#define PCI_DEV_PIRQ_ROUTE(dev_, a_, b_, c_, d_) \
- [dev_] = ((PIRQ ## d_) << 12) | ((PIRQ ## c_) << 8) | \
- ((PIRQ ## b_) << 4) | ((PIRQ ## a_) << 0)
-
-#define PIRQ_PIC(pirq_, pic_irq_) \
- [PIRQ ## pirq_] = PIRQ_PIC_IRQ ## pic_irq_
-
-/* used for ACPI only */
-#define PCIE_BRIDGE_DEV(prefix_, dev_, a_, b_, c_, d_)
-
-#endif /* !defined(__ASSEMBLER__) && !defined(__ACPI__) */
-
-#endif /* _BAYTRAIL_IRQ_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/lpc.h b/src/soc/intel/fsp_baytrail/include/soc/lpc.h
deleted file mode 100644
index defd34a2f5..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/lpc.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_LPC_H_
-#define _BAYTRAIL_LPC_H_
-
-/* PCI config registers in LPC bridge. */
-#define REVID 0x08
-#define ABASE 0x40 /* IO BAR */
-#define PBASE 0x44 /* MEM BAR */
-#define GBASE 0x48 /* IO BAR */
-#define IOBASE 0x4c /* MEM BAR */
-#define IBASE 0x50 /* MEM BAR */
-#define SBASE 0x54 /* MEM BAR */
-#define MPBASE 0x58 /* MEM BAR */
-#define PUBASE 0x5c
-#define SET_BAR_ENABLE 0x02
-#define UART_CONT 0x80
-#define RCBA 0xf0
-#define RCBA_ENABLE 0x01
-
-#define ILB_ACTL 0
-#define ILB_MC 0x4
-#define ILB_PIRQA_ROUT 0x8
-#define ILB_PIRQB_ROUT 0x9
-#define ILB_PIRQC_ROUT 0xA
-#define ILB_PIRQD_ROUT 0xB
-#define ILB_PIRQE_ROUT 0xC
-#define ILB_PIRQF_ROUT 0xD
-#define ILB_PIRQG_ROUT 0xE
-#define ILB_PIRQH_ROUT 0xF
-#define ILB_SERIRQ_CNTL 0x10
-#define SCNT_CONTINUOUS_MODE (1 << 7)
-#define SCNT_QUIET_MODE 0
-#define ILB_IR00 0x20
-#define ILB_IR01 0x22
-#define ILB_IR02 0x24
-#define ILB_IR03 0x26
-#define ILB_IR04 0x28
-#define ILB_IR05 0x2A
-#define ILB_IR06 0x2C
-#define ILB_IR07 0x2E
-#define ILB_IR08 0x30
-#define ILB_IR09 0x32
-#define ILB_IR10 0x34
-#define ILB_IR11 0x36
-#define ILB_IR12 0x38
-#define ILB_IR13 0x3A
-#define ILB_IR14 0x3C
-#define ILB_IR15 0x3E
-#define ILB_IR16 0x40
-#define ILB_IR17 0x42
-#define ILB_IR18 0x44
-#define ILB_IR19 0x46
-#define ILB_IR20 0x48
-#define ILB_IR21 0x4A
-#define ILB_IR22 0x4C
-#define ILB_IR23 0x4E
-#define ILB_IR24 0x50
-#define ILB_IR25 0x52
-#define ILB_IR26 0x54
-#define ILB_IR27 0x56
-#define ILB_IR28 0x58
-#define ILB_IR29 0x5A
-#define ILB_IR30 0x5C
-#define ILB_IR31 0x5E
-#define ILB_OIC 0x60
-#define SIRQEN (1 << 12)
-#define AEN (1 << 8)
-
-#define RID_A_STEPPING_START 1
-#define RID_B_STEPPING_START 5
-#define RID_C_STEPPING_START 0xe
-#define RID_D_STEPPING_START 0x11
-
-enum baytrail_stepping {
- STEP_A0,
- STEP_A1,
- STEP_B0,
- STEP_B1,
- STEP_B2,
- STEP_B3,
- STEP_C0,
- STEP_D0,
-};
-
-/* Registers behind the RCBA_BASE_ADDRESS bar. */
-#define GCS 0x00
-# define BILD (1 << 0)
-
-/* Default IO range claimed by the LPC devices. The upper bound is exclusive. */
-#define LPC_DEFAULT_IO_RANGE_LOWER 0
-#define LPC_DEFAULT_IO_RANGE_UPPER 0x1000
-#define IO_APIC_RANGE_SIZE 0x1000
-
-#endif /* _BAYTRAIL_LPC_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/msr.h b/src/soc/intel/fsp_baytrail/include/soc/msr.h
deleted file mode 100644
index 8edab59bdf..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/msr.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_MSR_H_
-#define _BAYTRAIL_MSR_H_
-
-#define MSR_BSEL_CR_OVERCLOCK_CONTROL 0xcd
-#define MSR_PLATFORM_INFO 0xce
-#define MSR_PKG_CST_CONFIG_CONTROL 0xe2
-#define MSR_POWER_MISC 0x120
-#define MSR_POWER_CTL 0x1fc
-#define MSR_PKG_POWER_SKU_UNIT 0x606
-#define MSR_PKG_POWER_LIMIT 0x610
-#define MSR_IACORE_RATIOS 0x66a
-#define MSR_IACORE_TURBO_RATIOS 0x66c
-#define MSR_IACORE_VIDS 0x66b
-#define MSR_IACORE_TURBO_VIDS 0x66d
-
-/* Read BCLK from MSR */
-unsigned int bus_freq_khz(void);
-
-#endif /* _BAYTRAIL_MSR_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/nvs.h b/src/soc/intel/fsp_baytrail/include/soc/nvs.h
deleted file mode 100644
index df2fc60d71..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/nvs.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2011 Google Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_NVS_H_
-#define _BAYTRAIL_NVS_H_
-
-#include <soc/device_nvs.h>
-
-typedef struct {
- /* Miscellaneous */
- u16 osys; /* 0x00 - Operating System */
- u8 smif; /* 0x02 - SMI function call ("TRAP") */
- u8 prm0; /* 0x03 - SMI function call parameter */
- u8 prm1; /* 0x04 - SMI function call parameter */
- u8 scif; /* 0x05 - SCI function call (via _L00) */
- u8 prm2; /* 0x06 - SCI function call parameter */
- u8 prm3; /* 0x07 - SCI function call parameter */
- u8 lckf; /* 0x08 - Global Lock function for EC */
- u8 prm4; /* 0x09 - Lock function parameter */
- u8 prm5; /* 0x0a - Lock function parameter */
- u32 p80d; /* 0x0b - Debug port (IO 0x80) value */
- u8 lids; /* 0x0f - LID state (open = 1) */
- u8 pwrs; /* 0x10 - Power state (AC = 1) */
- u8 pcnt; /* 0x11 - Processor Count */
- u8 tpmp; /* 0x12 - TPM Present and Enabled */
- u8 tlvl; /* 0x13 - Throttle Level */
- u8 ppcm; /* 0x14 - Maximum P-state usable by OS */
- u8 rsvd1[11];
-
- /* Device Config */
- u8 s5u0; /* 0x20 - Enable USB0 in S5 */
- u8 s5u1; /* 0x21 - Enable USB1 in S5 */
- u8 s3u0; /* 0x22 - Enable USB0 in S3 */
- u8 s3u1; /* 0x23 - Enable USB1 in S3 */
- u8 tact; /* 0x24 - Thermal Active trip point */
- u8 tpsv; /* 0x25 - Thermal Passive trip point */
- u8 tcrt; /* 0x26 - Thermal Critical trip point */
- u8 dpte; /* 0x27 - Enable DPTF */
- u8 rsvd2[8];
-
- /* Base Addresses */
- u32 obsolete_cmem; /* 0x30 - CBMEM TOC */
- u32 tolm; /* 0x34 - Top of Low Memory */
- u32 cbmc; /* 0x38 - coreboot memconsole */
- u8 rsvd3[196];
-
- /* Pad 0x0100-0x0fff */
- u8 rsvd4[3840];
-
- /* Baytrail LPSS (0x1000) */
- device_nvs_t dev;
-} __packed global_nvs_t;
-
-void acpi_create_gnvs(global_nvs_t *gnvs);
-
-/* Used in SMM to find the ACPI GNVS address */
-global_nvs_t *smm_get_gnvs(void);
-
-#endif /* _BAYTRAIL_NVS_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/pattrs.h b/src/soc/intel/fsp_baytrail/include/soc/pattrs.h
deleted file mode 100644
index 7b46345a47..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/pattrs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _PATTRS_H_
-#define _PATTRS_H_
-
-#include <stdint.h>
-#include <cpu/x86/msr.h>
-
-enum {
- IACORE_MIN,
- IACORE_LFM,
- IACORE_MAX,
- IACORE_TURBO,
- IACORE_END
-};
-
-/* The pattrs structure is a common place to stash pertinent information
- * about the processor or platform. Instead of going to the source (msrs, cpuid)
- * every time an attribute is needed use the pattrs structure.
- */
-struct pattrs {
- msr_t platform_id;
- msr_t platform_info;
- int iacore_ratios[IACORE_END];
- int iacore_vids[IACORE_END];
- uint32_t cpuid;
- int revid;
- int stepping;
- const void *microcode_patch;
- int address_bits;
- int num_cpus;
- unsigned int bclk_khz;
-};
-
-/* This is just to hide the abstraction w/o relying on how the underlying
- * storage is allocated. */
-#define PATTRS_GLOB_NAME __global_pattrs
-#define DEFINE_PATTRS struct pattrs PATTRS_GLOB_NAME
-extern DEFINE_PATTRS;
-
-static inline const struct pattrs *pattrs_get(void)
-{
- return &PATTRS_GLOB_NAME;
-}
-
-
-#endif /* _PATTRS_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/pci_devs.h b/src/soc/intel/fsp_baytrail/include/soc/pci_devs.h
deleted file mode 100644
index 5e5b8071df..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/pci_devs.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_PCI_DEVS_H_
-#define _BAYTRAIL_PCI_DEVS_H_
-
-#include <device/pci_def.h>
-
-#define BUS0 0
-
-/* All these devices live on bus 0 with the associated device and function */
-
-/* SoC transaction router */
-#define SOC_DEV 0x0
-#define SOC_FUNC 0
-# define SOC_DEVFN_SOC PCI_DEVFN(SOC_DEV,SOC_FUNC)
-
-
-/* Graphics and Display */
-#define GFX_DEV 0x2
-#define GFX_FUNC 0
-# define SOC_DEVFN_GFX PCI_DEVFN(GFX_DEV,GFX_FUNC)
-
-/* MIPI */
-#define MIPI_DEV 0x3
-#define MIPI_FUNC 0
-# define SOC_DEVFN_MIPI PCI_DEVFN(MIPI_DEV,MIPI_FUNC)
-
-
-/* SDIO Port */
-#define EMMC_DEV 0x10
-#define EMMC_FUNC 0
-# define SOC_DEVFN_EMMC PCI_DEVFN(EMMC_DEV,EMMC_FUNC)
-
-/* SDIO Port */
-#define SDIO_DEV 0x11
-#define SDIO_FUNC 0
-# define SOC_DEVFN_SDIO PCI_DEVFN(SDIO_DEV,SDIO_FUNC)
-
-/* SD Port */
-#define SD_DEV 0x12
-#define SD_FUNC 0
-# define SOC_DEVFN_SD PCI_DEVFN(SD_DEV,SD_FUNC)
-
-/* SATA */
-#define SATA_DEV 0x13
-#define SATA_FUNC 0
-# define SOC_DEVFN_SATA PCI_DEVFN(SATA_DEV,SATA_FUNC)
-
-/* xHCI */
-#define XHCI_DEV 0x14
-#define XHCI_FUNC 0
-# define XHCI_FUS_REG 0xE0
-# define XHCI_FUNC_DISABLE (1 << 0)
-# define XHCI_USB2PR_REG 0xD0
-# define SOC_DEVFN_XHCI PCI_DEVFN(XHCI_DEV,XHCI_FUNC)
-
-/* LPE Audio */
-#define LPE_DEV 0x15
-#define LPE_FUNC 0
-# define SOC_DEVFN_LPE PCI_DEVFN(LPE_DEV,LPE_FUNC)
-
-/* OTG */
-#define OTG_DEV 0x16
-#define OTG_FUNC 0
-# define SOC_DEVFN_OTG PCI_DEVFN(LPE_DEV,LPE_FUNC)
-
-/* MMC Port */
-#define MMC45_DEV 0x17
-#define MMC45_FUNC 0
-# define SOC_DEVFN_MMC45 PCI_DEVFN(MMC45_DEV,MMC45_FUNC)
-
-/* Serial IO 1 */
-#define SIO1_DEV 0x18
-# define SIO_DMA1_DEV SIO1_DEV
-# define SIO_DMA1_FUNC 0
-# define I2C1_DEV SIO1_DEV
-# define I2C1_FUNC 1
-# define I2C2_DEV SIO1_DEV
-# define I2C2_FUNC 2
-# define I2C3_DEV SIO1_DEV
-# define I2C3_FUNC 3
-# define I2C4_DEV SIO1_DEV
-# define I2C4_FUNC 4
-# define I2C5_DEV SIO1_DEV
-# define I2C5_FUNC 5
-# define I2C6_DEV SIO1_DEV
-# define I2C6_FUNC 6
-# define I2C7_DEV SIO1_DEV
-# define I2C7_FUNC 7
-# define SOC_DEVFN_SIO_DMA1 PCI_DEVFN(SIO_DMA1_DEV,SIO_DMA1_FUNC)
-# define SOC_DEVFN_I2C1 PCI_DEVFN(I2C1_DEV,I2C1_FUNC)
-# define SOC_DEVFN_I2C2 PCI_DEVFN(I2C2_DEV,I2C2_FUNC)
-# define SOC_DEVFN_I2C3 PCI_DEVFN(I2C3_DEV,I2C3_FUNC)
-# define SOC_DEVFN_I2C4 PCI_DEVFN(I2C4_DEV,I2C4_FUNC)
-# define SOC_DEVFN_I2C5 PCI_DEVFN(I2C5_DEV,I2C5_FUNC)
-# define SOC_DEVFN_I2C6 PCI_DEVFN(I2C6_DEV,I2C6_FUNC)
-# define SOC_DEVFN_I2C7 PCI_DEVFN(I2C7_DEV,I2C7_FUNC)
-
-#define PCH_DEV_SLOT_I2C1 I2C1_DEV
-
-/* Trusted Execution Engine */
-#define TXE_DEV 0x1a
-#define TXE_FUNC 0
-# define SOC_DEVFN_TXE PCI_DEVFN(TXE_DEV,TXE_FUNC)
-
-/* HD Audio */
-#define HDA_DEV 0x1b
-#define HDA_FUNC 0
-# define SOC_DEVFN_HDA PCI_DEVFN(HDA_DEV,HDA_FUNC)
-
-/* PCIe Ports */
-#define PCIE_DEV 0x1c
-# define PCIE_PORT1_DEV PCIE_DEV
-# define PCIE_PORT1_FUNC 0
-# define PCIE_PORT2_DEV PCIE_DEV
-# define PCIE_PORT2_FUNC 1
-# define PCIE_PORT3_DEV PCIE_DEV
-# define PCIE_PORT3_FUNC 2
-# define PCIE_PORT4_DEV PCIE_DEV
-# define PCIE_PORT4_FUNC 3
-# define SOC_DEVFN_PCIE_PORT1 PCI_DEVFN(PCIE_DEV,PCIE_PORT1_FUNC)
-# define SOC_DEVFN_PCIE_PORT2 PCI_DEVFN(PCIE_DEV,PCIE_PORT2_FUNC)
-# define SOC_DEVFN_PCIE_PORT3 PCI_DEVFN(PCIE_DEV,PCIE_PORT3_FUNC)
-# define SOC_DEVFN_PCIE_PORT4 PCI_DEVFN(PCIE_DEV,PCIE_PORT4_FUNC)
-
-/* EHCI */
-#define EHCI_DEV 0x1d
-#define EHCI_FUNC 0
-# define SOC_DEVFN_EHCI PCI_DEVFN(EHCI_DEV,EHCI_FUNC)
-
-/* Serial IO 2 */
-#define SIO2_DEV 0x1e
-# define SIO_DMA2_DEV SIO2_DEV
-# define SIO_DMA2_FUNC 0
-# define PWM1_DEV SIO2_DEV
-# define PWM1_FUNC 1
-# define PWM2_DEV SIO2_DEV
-# define PWM2_FUNC 2
-# define HSUART1_DEV SIO2_DEV
-# define HSUART1_FUNC 3
-# define HSUART2_DEV SIO2_DEV
-# define HSUART2_FUNC 4
-# define SPI_DEV SIO2_DEV
-# define SPI_FUNC 5
-# define SOC_DEVFN_SIO_DMA2 PCI_DEVFN(SIO_DMA2_DEV,SIO_DMA2_FUNC)
-# define SOC_DEVFN_PWM1 PCI_DEVFN(PWM1_DEV,PWM1_FUNC)
-# define SOC_DEVFN_PWM2 PCI_DEVFN(PWM2_DEV,PWM2_FUNC)
-# define SOC_DEVFN_HSUART1 PCI_DEVFN(HSUART1_DEV,HSUART1_FUNC)
-# define SOC_DEVFN_HSUART2 PCI_DEVFN(HSUART2_DEV,HSUART2_FUNC)
-# define SOC_DEVFN_SPI PCI_DEVFN(SPI_DEV,SPI_FUNC)
-
-
-/* Platform Controller Unit */
-#define PCU_DEV 0x1f
-# define LPC_DEV PCU_DEV
-# define LPC_FUNC 0
-# define PCH_DEVFN_LPC PCI_DEVFN(LPC_DEV,LPC_FUNC)
-# define LPC_BDF PCI_DEV(0, LPC_DEV, LPC_FUNC)
-
-# define SMBUS_DEV PCU_DEV
-# define SMBUS_FUNC 3
-# define SOC_DEVFN_SMBUS PCI_DEVFN(SMBUS_DEV,SMBUS_FUNC)
-
-#define SOC_DEVID 0x0f00
-#define GFX_DEVID 0x0f31
-#define MIPI_DEVID 0x0f38
-#define EMMC_DEVID 0x0f14
-#define SDIO_DEVID 0x0f15
-#define SD_DEVID 0x0f16
-#define IDE1_DEVID 0x0f20
-#define IDE2_DEVID 0x0f21
-#define AHCI1_DEVID 0x0f22
-#define AHCI2_DEVID 0x0f23
-#define XHCI_DEVID 0x0f35
-#define LPE_DEVID 0x0f28
-#define OTG_DEVID 0x0f37
-#define MMC45_DEVID 0x0f50
-#define SIO_DMA1_DEVID 0x0f40
-#define I2C1_DEVID 0x0f41
-#define I2C2_DEVID 0x0f42
-#define I2C3_DEVID 0x0f43
-#define I2C4_DEVID 0x0f44
-#define I2C5_DEVID 0x0f45
-#define I2C6_DEVID 0x0f46
-#define I2C7_DEVID 0x0f47
-#define TXE_DEVID 0x0f18
-#define HDA_DEVID 0x0f04
-#define PCIE_PORT1_DEVID 0x0f48
-#define PCIE_PORT2_DEVID 0x0f4a
-#define PCIE_PORT3_DEVID 0x0f4c
-#define PCIE_PORT4_DEVID 0x0f4e
-#define EHCI_DEVID 0x0f34
-#define SIO_DMA2_DEVID 0x0f06
-#define PWM1_DEVID 0x0f08
-#define PWM2_DEVID 0x0f09
-#define HSUART1_DEVID 0x0f0a
-#define HSUART2_DEVID 0x0f0c
-#define SPI_DEVID 0xf0e
-#define LPC_DEVID 0x0f1c
-#define SMBUS_DEVID 0x0f12
-
-#endif /* _BAYTRAIL_PCI_DEVS_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/pcie.h b/src/soc/intel/fsp_baytrail/include/soc/pcie.h
deleted file mode 100644
index 9d2d3de53e..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/pcie.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_PCIE_H_
-#define _BAYTRAIL_PCIE_H_
-
-/* PCIe root port config space registers. */
-#define XCAP 0x40
-# define SI (1 << 24)
-#define DCAP 0x44
-# define MPS_MASK 0x7
-#define DCTL_DSTS 0x48
-# define URE (1 << 3)
-# define FEE (1 << 2)
-# define NFE (1 << 1)
-# define CEE (1 << 0)
-#define LCAP 0x4c
-# define L1EXIT_SHIFT 15
-# define L1EXIT_MASK (0x7 << L1EXIT_SHIFT)
-#define LCTL 0x50
-# define CCC (1 << 6)
-# define RL (1 << 5)
-# define LD (1 << 4)
-#define LSTS 0x52
-#define SLCAP 0x54
-# define SLN_SHIFT 19
-# define SLS_SHIFT 15
-# define SLV_SHIFT 7
-# define HPC (1 << 6)
-# define HPS (1 << 5)
-#define SLCTL_SLSTS 0x58
-# define PDS (1 << 22)
-#define DCAP2 0x64
-# define OBFFS (0x3 << 18)
-# define LTRMS (1 << 11)
-#define DSTS2 0x68
-# define OBFFEN (3 << 13)
-# define LTRME (1 << 10)
-# define CTD (1 << 4)
-#define CHCFG 0xd0
-# define UPSD (1 << 24)
-# define UNRS (1 << 15)
-# define UPRS (1 << 14)
-#define MPC2 0xd4
-# define IPF (1 << 11)
-# define LSTP (1 << 6)
-# define EOIFD (1 << 1)
-#define MPC 0xd8
-# define CCEL_SHIFT 15
-# define CCEL_MASK (0x7 << CCEL_SHIFT)
-#define RPPGEN 0xe0
-# define RPSCGEN (1 << 15)
-# define LCLKREQEN (1 << 13)
-# define BBCLKREQEN (1 << 12)
-# define SRDLCGEN (1 << 11)
-# define SRDBCGEN (1 << 10)
-# define RPDLCGEN (1 << 9)
-# define RPDBCGEN (1 << 8)
-#define PWRCTL 0xe8
-# define RPL1SQPOL (1 << 1)
-# define RPDTSQPOL (1 << 0)
-#define PHYCTL2_IOSFBCTL 0xf4
-# define PLL_OFF_EN (1 << 8)
-# define TDFT (3 << 14)
-# define TXCFGCHWAIT (3 << 12)
-# define SIID (3 << 26)
-#define STRPFUSECFG 0xfc
-# define LANECFG_SHIFT 14
-# define LANECFG_MASK (0x3 << LANECFG_SHIFT)
-#define AERCH 0x100
-#define NFTS 0x314
-#define L0SC 0x318
-#define CFG2 0x320
-# define CSREN (1 << 22)
-# define LATGC_SHIFT 6
-# define LATGC_MASK (0x7 << LATGC_SHIFT)
-#define PCIEDBG 0x324
-# define SPCE (1 << 5)
-#define PCIESTS1 0x328
-#define PCIEALC 0x338
-#define RTP 0x33c
-#define PHYCTL4 0x408
-# define SQDIS (1 << 27)
-
-
-#endif /* _BAYTRAIL_PCIE_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/pmc.h b/src/soc/intel/fsp_baytrail/include/soc/pmc.h
deleted file mode 100644
index 9e588addae..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/pmc.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_PMC_H_
-#define _BAYTRAIL_PMC_H_
-
-#include <arch/acpi.h>
-
-#define IOCOM1 0x3f8
-
-/* Memory mapped IO registers behind PMC_BASE_ADDRESS */
-#define PRSTS 0x00
-# define PMC_WDT_STS (1 << 15)
-# define SEC_GBLRST_STS (1 << 7)
-# define SEC_WDT_STS (1 << 6)
-# define WOL_OVR_WK_STS (1 << 5)
-# define PMC_WAKE_STS (1 << 4)
-#define PMC_CFG 0x08
-# define SPS (1 << 5)
-# define NO_REBOOT (1 << 4)
-# define SX_ENT_TO_EN (1 << 3)
-# define TIMING_T581_SHIFT (0)
-# define TIMING_T581_MASK (3 << TIMING_T581_SHIFT)
-# define TIMING_T581_10uS (0 << TIMING_T581_SHIFT)
-# define TIMING_T581_100uS (1 << TIMING_T581_SHIFT)
-# define TIMING_T581_1mS (2 << TIMING_T581_SHIFT)
-# define TIMING_T581_10mS (3 << TIMING_T581_SHIFT)
-#define VLV_PM_STS 0x0c
-# define PMC_MSG_FULL_STS (1 << 24)
-# define PMC_MSG_4_FULL_STS (1 << 23)
-# define PMC_MSG_3_FULL_STS (1 << 22)
-# define PMC_MSG_2_FULL_STS (1 << 21)
-# define PMC_MSG_1_FULL_STS (1 << 20)
-# define CODE_REQ (1 << 8)
-# define HPR_ENT_TO (1 << 2)
-# define SX_ENT_TO (1 << 1)
-#define GEN_PMCON1 0x20
-# define UART_EN (1 << 24)
-# define DISB (1 << 23)
-# define MEM_SR (1 << 21)
-# define SRS (1 << 20)
-# define CTS (1 << 19)
-# define MS4V (1 << 18)
-# define PWR_FLR (1 << 16)
-# define PME_B0_S5_DIS (1 << 15)
-# define SUS_PWR_FLR (1 << 14)
-# define WOL_EN_OVRD (1 << 13)
-# define DIS_SLP_X_STRCH_SUS_UP (1 << 12)
-# define GEN_RST_STS (1 << 9)
-# define RPS (1 << 2)
-# define AFTERG3_EN (1 << 0)
-#define GEN_PMCON2 0x24
-# define SLPSX_STR_POL_LOCK (1 << 18)
-# define BIOS_PCI_EXP_EN (1 << 10)
-# define PWRBTN_LVL (1 << 9)
-# define SMI_LOCK (1 << 4)
-#define ETR 0x48
-# define CF9LOCK (1 << 31)
-# define LTR_DEF (1 << 22)
-# define IGNORE_HPET (1 << 21)
-# define CF9GR (1 << 20)
-# define CWORWRE (1 << 18)
-#define FUNC_DIS 0x34
-# define SIO_DMA2_DIS (1 << 0)
-# define PWM1_DIS (1 << 1)
-# define PWM2_DIS (1 << 2)
-# define HSUART1_DIS (1 << 3)
-# define HSUART2_DIS (1 << 4)
-# define SPI_DIS (1 << 5)
-# define SDIO_DIS (1 << 9)
-# define SD_DIS (1 << 10)
-# define MMC_DIS (1 << 11)
-# define HDA_DIS (1 << 12)
-# define LPE_DIS (1 << 13)
-# define OTG_DIS (1 << 14)
-# define XHCI_DIS (1 << 15)
-# define SATA_DIS (1 << 17)
-# define EHCI_DIS (1 << 18)
-# define TXE_DIS (1 << 19)
-# define PCIE_PORT1_DIS (1 << 20)
-# define PCIE_PORT2_DIS (1 << 21)
-# define PCIE_PORT3_DIS (1 << 22)
-# define PCIE_PORT4_DIS (1 << 23)
-# define SIO_DMA1_DIS (1 << 24)
-# define I2C1_DIS (1 << 25)
-# define I2C2_DIS (1 << 26)
-# define I2C3_DIS (1 << 27)
-# define I2C4_DIS (1 << 28)
-# define I2C5_DIS (1 << 29)
-# define I2C6_DIS (1 << 30)
-# define I2C7_DIS (1 << 31)
-#define FUNC_DIS2 0x38
-# define USH_SS_PHY_DIS (1 << 2)
-# define OTG_SS_PHY_DIS (1 << 1)
-# define SMBUS_DIS (1 << 0)
-#define GPIO_ROUT 0x58
-# define ROUTE_MASK 3
-# define ROUTE_NONE 0
-# define ROUTE_SMI 1
-# define ROUTE_SCI 2
-#define PLT_CLK_CTL_0 0x60
-#define PLT_CLK_CTL_1 0x64
-#define PLT_CLK_CTL_2 0x68
-#define PLT_CLK_CTL_3 0x6c
-#define PLT_CLK_CTL_4 0x70
-#define PLT_CLK_CTL_5 0x74
-# define CLK_FREQ_25MHZ (0x0 << 2)
-# define CLK_FREQ_19P2MHZ (0x1 << 2)
-# define CLK_CTL_D3_LPE (0x0 << 0)
-# define CLK_CTL_ON (0x1 << 0)
-# define CLK_CTL_OFF (0x2 << 0)
-#define PME_STS 0xc0
-#define GPE_LEVEL_EDGE 0xc4
-# define GPE_EDGE 0
-# define GPE_LEVEL 1
-#define GPE_POLARITY 0xc8
-# define GPE_ACTIVE_HIGH 1
-# define GPE_ACTIVE_LOW 0
-#define LOCK 0xcc
-
-/* IO Mapped registers behind ACPI_BASE_ADDRESS */
-#define PM1_STS 0x00
-#define WAK_STS (1 << 15)
-#define PCIEXPWAK_STS (1 << 14)
-#define USB_STS (1 << 13)
-#define PRBTNOR_STS (1 << 11)
-#define RTC_STS (1 << 10)
-#define PWRBTN_STS (1 << 8)
-#define GBL_STS (1 << 5)
-#define TMROF_STS (1 << 0)
-#define PM1_EN 0x02
-#define PCIEXPWAK_DIS (1 << 14)
-#define USB_WAKE_EN (1 << 13)
-#define RTC_EN (1 << 10)
-#define PWRBTN_EN (1 << 8)
-#define GBL_EN (1 << 5)
-#define TMROF_EN (1 << 0)
-#define PM1_CNT 0x04
-#define GBL_RLS (1 << 2)
-#define BM_RLD (1 << 1)
-#define SCI_EN (1 << 0)
-#define PM1_TMR 0x08
-#define GPE0_STS 0x20
-#define CORE_GPIO_STS7 (1 << 31)
-#define CORE_GPIO_STS6 (1 << 30)
-#define CORE_GPIO_STS5 (1 << 29)
-#define CORE_GPIO_STS4 (1 << 28)
-#define CORE_GPIO_STS3 (1 << 27)
-#define CORE_GPIO_STS2 (1 << 26)
-#define CORE_GPIO_STS1 (1 << 25)
-#define CORE_GPIO_STS0 (1 << 24)
-#define SUS_GPIO_STS7 (1 << 23)
-#define SUS_GPIO_STS6 (1 << 22)
-#define SUS_GPIO_STS5 (1 << 21)
-#define SUS_GPIO_STS4 (1 << 20)
-#define SUS_GPIO_STS3 (1 << 19)
-#define SUS_GPIO_STS2 (1 << 18)
-#define SUS_GPIO_STS1 (1 << 17)
-#define SUS_GPIO_STS0 (1 << 16)
-#define PME_B0_STS_BIT 13
-#define PME_B0_STS (1 << PME_B0_STS_BIT)
-#define BATLOW_STS (1 << 10)
-#define PCI_EXP_STS (1 << 9)
-#define PCIE_WAKE3_STS (1 << 8)
-#define PCIE_WAKE2_STS (1 << 7)
-#define PCIE_WAKE1_STS (1 << 6)
-#define GUNIT_SCI_STS (1 << 5)
-#define PUNIT_SCI_STS (1 << 4)
-#define PCIE_WAKE0_STS (1 << 3)
-#define SWGPE_STS (1 << 2)
-#define HOT_PLUG_STS (1 << 1)
-#define GPE0_EN 0x28
-#define CORE_GPIO_EN7 (1 << 31)
-#define CORE_GPIO_EN6 (1 << 30)
-#define CORE_GPIO_EN5 (1 << 29)
-#define CORE_GPIO_EN4 (1 << 28)
-#define CORE_GPIO_EN3 (1 << 27)
-#define CORE_GPIO_EN2 (1 << 26)
-#define CORE_GPIO_EN1 (1 << 25)
-#define CORE_GPIO_EN0 (1 << 24)
-#define SUS_GPIO_EN7_BIT 23
-#define SUS_GPIO_EN7 (1 << SUS_GPIO_EN7_BIT)
-#define SUS_GPIO_EN6_BIT 22
-#define SUS_GPIO_EN6 (1 << SUS_GPIO_EN6_BIT)
-#define SUS_GPIO_EN5_BIT 21
-#define SUS_GPIO_EN5 (1 << SUS_GPIO_EN5_BIT)
-#define SUS_GPIO_EN4_BIT 20
-#define SUS_GPIO_EN4 (1 << SUS_GPIO_EN4_BIT)
-#define SUS_GPIO_EN3_BIT 19
-#define SUS_GPIO_EN3 (1 << SUS_GPIO_EN3_BIT)
-#define SUS_GPIO_EN2_BIT 18
-#define SUS_GPIO_EN2 (1 << SUS_GPIO_EN2_BIT)
-#define SUS_GPIO_EN1_BIT 17
-#define SUS_GPIO_EN1 (1 << SUS_GPIO_EN1_BIT)
-#define SUS_GPIO_EN0_BIT 16
-#define SUS_GPIO_EN0 (1 << SUS_GPIO_EN0_BIT)
-#define PME_B0_EN (1 << 13)
-#define BATLOW_EN (1 << 10)
-#define PCI_EXP_EN (1 << 9)
-#define PCIE_WAKE3_EN (1 << 8)
-#define PCIE_WAKE2_EN (1 << 7)
-#define PCIE_WAKE1_EN (1 << 6)
-#define PCIE_WAKE0_EN (1 << 3)
-#define SWGPE_EN (1 << 2)
-#define HOT_PLUG_EN (1 << 1)
-#define _ACPI_ENABLE_WAKE_SUS_GPIO(x) SUS_GPIO_EN##x##_BIT
-#define ACPI_ENABLE_WAKE_SUS_GPIO(x) _ACPI_ENABLE_WAKE_SUS_GPIO(x)
-#define SMI_EN 0x30
-#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
-#define USB_EN (1 << 17) // Legacy USB2 SMI logic
-#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS
-#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al)
-#define BIOS_RLS (1 << 7) // asserts SCI on bit set
-#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set
-#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI#
-#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI#
-#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit
-#define EOS (1 << 1) // End of SMI (deassert SMI#)
-#define GBL_SMI_EN (1 << 0) // SMI# generation at all?
-#define SMI_STS 0x34
-#define ALT_GPIO_SMI 0x38
-#define UPRWC 0x3c
-# define UPRWC_WR_EN (1 << 1) // USB Per-Port Registers Write Enable
-#define GPE_CTRL 0x40
-#define PM2A_CNT_BLK 0x50
-#define TCO_RLD 0x60
-#define TCO_STS 0x64
-# define SECOND_TO_STS (1 << 17)
-# define TCO_TIMEOUT (1 << 3)
-#define TCO1_CNT 0x68
-# define TCO_LOCK (1 << 12)
-# define TCO_TMR_HALT (1 << 11)
-#define TCO_TMR 0x70
-
-/* I/O ports */
-#define RST_CNT 0xcf9
-# define FULL_RST (1 << 3)
-# define RST_CPU (1 << 2)
-# define SYS_RST (1 << 1)
-
-#if !defined(__ASSEMBLER__) && !defined(__ACPI__)
-
-/* Track power state from reset to log events. */
-struct chipset_power_state {
- uint16_t pm1_sts;
- uint16_t pm1_en;
- uint32_t pm1_cnt;
- uint32_t gpe0_sts;
- uint32_t gpe0_en;
- uint32_t tco_sts;
- uint32_t prsts;
- uint32_t gen_pmcon1;
- uint32_t gen_pmcon2;
-} __packed;
-
-/* Power Management Utility Functions. */
-uint16_t get_pmbase(void);
-uint32_t clear_smi_status(void);
-uint16_t clear_pm1_status(void);
-uint32_t clear_tco_status(void);
-uint32_t clear_gpe_status(void);
-uint32_t clear_alt_status(void);
-void clear_pmc_status(void);
-void enable_smi(uint32_t mask);
-void disable_smi(uint32_t mask);
-void enable_pm1(uint16_t events);
-void enable_pm1_control(uint32_t mask);
-void disable_pm1_control(uint32_t mask);
-void enable_gpe(uint32_t mask);
-void disable_gpe(uint32_t mask);
-void disable_all_gpe(void);
-
-uint32_t chipset_prev_sleep_state(uint32_t clear);
-
-void southcluster_log_state(void);
-
-#endif /* !defined(__ASSEMBLER__) && !defined(__ACPI__) */
-
-#endif /* _BAYTRAIL_PMC_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/ramstage.h b/src/soc/intel/fsp_baytrail/include/soc/ramstage.h
deleted file mode 100644
index 45fda9e937..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/ramstage.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_RAMSTAGE_H_
-#define _BAYTRAIL_RAMSTAGE_H_
-
-#include <device/device.h>
-
-/* The baytrail_init_pre_device() function is called prior to device
- * initialization, but it's after console and cbmem has been reinitialized. */
-void baytrail_init_pre_device(void);
-void baytrail_init_cpus(struct device *dev);
-void southcluster_enable_dev(struct device *dev);
-void scc_enable_acpi_mode(struct device *dev, int iosf_reg, int nvs_index);
-
-extern struct pci_operations soc_pci_ops;
-
-#endif /* _BAYTRAIL_RAMSTAGE_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/romstage.h b/src/soc/intel/fsp_baytrail/include/soc/romstage.h
deleted file mode 100644
index dce953993a..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/romstage.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_ROMSTAGE_H_
-#define _BAYTRAIL_ROMSTAGE_H_
-
-#include <stdint.h>
-#include <drivers/intel/fsp1_0/fsp_util.h>
-
-void main(FSP_INFO_HEADER *fsp_info_header);
-
-#define NUM_ROMSTAGE_TS 4
-
-void tco_disable(void);
-void punit_init(void);
-void early_mainboard_romstage_entry(void);
-void late_mainboard_romstage_entry(void);
-void get_func_disables(uint32_t *mask, uint32_t *mask2);
-void byt_config_com1_and_enable(void);
-
-#endif /* _BAYTRAIL_ROMSTAGE_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/smm.h b/src/soc/intel/fsp_baytrail/include/soc/smm.h
deleted file mode 100644
index b6e24a8a0f..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/smm.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_SMM_H_
-#define _BAYTRAIL_SMM_H_
-
-
-#endif /* _BAYTRAIL_SMM_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/spi.h b/src/soc/intel/fsp_baytrail/include/soc/spi.h
deleted file mode 100644
index 1ac0b59e56..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/spi.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _BAYTRAIL_SPI_H_
-#define _BAYTRAIL_SPI_H_
-
-#include <stdint.h>
-
-/* These registers live behind SPI_BASE_ADDRESS. */
-#define HSFSTS 0x04
-# define FLOCKDN (0x1 << 15)
-#define PREOP 0x94
-#define OPTYPE 0x96
-#define OPMENU0 0x98
-#define OPMENU1 0x9c
-#define LVSCC 0xc4
-# define VCL (0x1 << 23)
-# define EO(x) (((x) & 0xff) << 8)
-# define WG_1_BYTE (0x0 << 2)
-# define WG_64_BYTE (0x1 << 2)
-# define BES_256_BYTE (0x0 << 0)
-# define BES_4_KB (0x1 << 0)
-# define BES_8_KB (0x2 << 0)
-# define BES_64_KB (0x3 << 0)
-#define UVSCC 0xc8
-#define SCS 0xf8
-# define SMIWPEN (0x1 << 7)
-#define BCR 0xfc
-# define EISS (0x1 << 5)
-# define SRC_MASK (0x3 << 2)
-# define SRC_CACHE_NO_PREFETCH (0x0 << 2)
-# define SRC_NO_CACHE_NO_PREFETCH (0x1 << 2)
-# define SRC_CACHE_PREFETCH (0x2 << 2)
-# define BCR_LE (0x1 << 1)
-# define BCR_WPD (0x1 << 0)
-
-/*
- * SPI lockdown configuration.
- */
-struct spi_config {
- uint16_t preop;
- uint16_t optype;
- uint32_t opmenu[2];
- uint32_t lvscc;
- uint32_t uvscc;
-};
-
-/* Return 0 on success < 0 on failure. */
-int mainboard_get_spi_config(struct spi_config *cfg);
-
-#endif /* _BAYTRAIL_SPI_H_ */
diff --git a/src/soc/intel/fsp_baytrail/include/soc/xhci.h b/src/soc/intel/fsp_baytrail/include/soc/xhci.h
deleted file mode 100644
index d509b51a6a..0000000000
--- a/src/soc/intel/fsp_baytrail/include/soc/xhci.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef BAYTRAIL_XHCI_H
-#define BAYTRAIL_XHCI_H
-
-/* XHCI PCI Registers */
-#define XHCI_PWR_CTL_STS 0x74
-#define XHCI_USB2PR 0xd0
-#define XHCI_USB2PRM 0xd4
-#define XHCI_USB3PR 0xd8
-#define XHCI_USB3PRM 0xdc
-#define XHCI_USB2PDO 0xe4
-#define XHCI_USB3PDO 0xe8
-
-/* XHCI Memory Registers */
-#define XHCI_USB3_PORTSC(port) (0x4e0 + (port * 0x10))
-# define XHCI_USB3_PORTSC_CHST (0x7f << 17)
-# define XHCI_USB3_PORTSC_WCE (1 << 25) /* Wake on Connect */
-# define XHCI_USB3_PORTSC_WDE (1 << 26) /* Wake on Disconnect */
-# define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */
-# define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */
-# define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */
-# define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */
-# define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */
-# define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */
-# define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */
-# define XHCI_PLSR_RXDETECT (5 << 5) /* Port is disconnected */
-# define XHCI_PLSR_POLLING (7 << 5) /* Port is polling */
-# define XHCI_PLSW_ENABLE (5 << 5) /* Enable port */
-
-/* The Fuse register is incorrect for Baytrail-M so use hardcoded values */
-#define BYTM_USB2_PORT_COUNT 4
-#define BYTM_USB2_PORT_MAP 0xf
-#define BYTM_USB3_PORT_COUNT 1
-#define BYTM_USB3_PORT_MAP 0x1
-
-#define XHCI_RESET_TIMEOUT 100000 /* 100ms */
-
-#endif /* BAYTRAIL_XHCI_H */
diff --git a/src/soc/intel/fsp_baytrail/iosf.c b/src/soc/intel/fsp_baytrail/iosf.c
deleted file mode 100644
index 25f82ababd..0000000000
--- a/src/soc/intel/fsp_baytrail/iosf.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google, Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC.
- * Copyright (C) 2016 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <device/pci_ops.h>
-#include <soc/iosf.h>
-
-static inline void write_iosf_reg(int reg, uint32_t value)
-{
- pci_s_write_config32(IOSF_PCI_DEV, reg, value);
-}
-
-static inline uint32_t read_iosf_reg(int reg)
-{
- return pci_s_read_config32(IOSF_PCI_DEV, reg);
-}
-
-/* Common sequences for all the port accesses. */
-static uint32_t iosf_read_port(uint32_t cr, int reg)
-{
- cr |= IOSF_REG(reg) | IOSF_BYTE_EN;
- write_iosf_reg(MCRX_REG, IOSF_REG_UPPER(reg));
- write_iosf_reg(MCR_REG, cr);
- return read_iosf_reg(MDR_REG);
-}
-
-static void iosf_write_port(uint32_t cr, int reg, uint32_t val)
-{
- cr |= IOSF_REG(reg) | IOSF_BYTE_EN;
- write_iosf_reg(MDR_REG, val);
- write_iosf_reg(MCRX_REG, IOSF_REG_UPPER(reg));
- write_iosf_reg(MCR_REG, cr);
-}
-
-#define IOSF_READ(port) \
- IOSF_OPCODE(IOSF_OP_READ_##port) | IOSF_PORT(IOSF_PORT_##port)
-#define IOSF_WRITE(port) \
- IOSF_OPCODE(IOSF_OP_WRITE_##port) | IOSF_PORT(IOSF_PORT_##port)
-
-uint32_t iosf_bunit_read(int reg)
-{
- return iosf_read_port(IOSF_READ(BUNIT), reg);
-}
-
-void iosf_bunit_write(int reg, uint32_t val)
-{
- iosf_write_port(IOSF_WRITE(BUNIT), reg, val);
-}
-
-uint32_t iosf_dunit_read(int reg)
-{
- return iosf_read_port(IOSF_READ(SYSMEMC), reg);
-}
-
-uint32_t iosf_dunit_ch0_read(int reg)
-{
- return iosf_dunit_read(reg);
-}
-
-uint32_t iosf_dunit_ch1_read(int reg)
-{
- uint32_t cr = IOSF_OPCODE(IOSF_OP_READ_SYSMEMC) |
- IOSF_PORT(IOSF_PORT_DUNIT_CH1);
- return iosf_read_port(cr, reg);
-}
-
-void iosf_dunit_write(int reg, uint32_t val)
-{
- iosf_write_port(IOSF_WRITE(SYSMEMC), reg, val);
-}
-
-uint32_t iosf_punit_read(int reg)
-{
- return iosf_read_port(IOSF_READ(PMC), reg);
-}
-
-void iosf_punit_write(int reg, uint32_t val)
-{
- iosf_write_port(IOSF_WRITE(PMC), reg, val);
-}
-
-uint32_t iosf_usbphy_read(int reg)
-{
- return iosf_read_port(IOSF_READ(USBPHY), reg);
-}
-
-void iosf_usbphy_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(USBPHY), reg, val);
-}
-
-uint32_t iosf_ushphy_read(int reg)
-{
- return iosf_read_port(IOSF_READ(USHPHY), reg);
-}
-
-void iosf_ushphy_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(USHPHY), reg, val);
-}
-
-uint32_t iosf_lpss_read(int reg)
-{
- return iosf_read_port(IOSF_READ(LPSS), reg);
-}
-
-void iosf_lpss_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(LPSS), reg, val);
-}
-
-uint32_t iosf_ccu_read(int reg)
-{
- return iosf_read_port(IOSF_READ(CCU), reg);
-}
-
-void iosf_ccu_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(CCU), reg, val);
-}
-
-uint32_t iosf_score_read(int reg)
-{
- return iosf_read_port(IOSF_READ(SCORE), reg);
-}
-
-void iosf_score_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(SCORE), reg, val);
-}
-
-uint32_t iosf_scc_read(int reg)
-{
- return iosf_read_port(IOSF_READ(SCC), reg);
-}
-
-void iosf_scc_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(SCC), reg, val);
-}
-
-uint32_t iosf_aunit_read(int reg)
-{
- return iosf_read_port(IOSF_READ(AUNIT), reg);
-}
-
-void iosf_aunit_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(AUNIT), reg, val);
-}
-
-uint32_t iosf_cpu_bus_read(int reg)
-{
- return iosf_read_port(IOSF_READ(CPU_BUS), reg);
-}
-
-void iosf_cpu_bus_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(CPU_BUS), reg, val);
-}
-
-uint32_t iosf_sec_read(int reg)
-{
- return iosf_read_port(IOSF_READ(SEC), reg);
-}
-
-void iosf_sec_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(SEC), reg, val);
-}
-
-uint32_t iosf_port45_read(int reg)
-{
- return iosf_read_port(IOSF_READ(0x45), reg);
-}
-
-void iosf_port45_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(0x45), reg, val);
-}
-
-uint32_t iosf_port46_read(int reg)
-{
- return iosf_read_port(IOSF_READ(0x46), reg);
-}
-
-void iosf_port46_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(0x46), reg, val);
-}
-
-uint32_t iosf_port47_read(int reg)
-{
- return iosf_read_port(IOSF_READ(0x47), reg);
-}
-
-void iosf_port47_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(0x47), reg, val);
-}
-
-uint32_t iosf_port55_read(int reg)
-{
- return iosf_read_port(IOSF_READ(0x55), reg);
-}
-
-void iosf_port55_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(0x55), reg, val);
-}
-
-uint32_t iosf_port58_read(int reg)
-{
- return iosf_read_port(IOSF_READ(0x58), reg);
-}
-
-void iosf_port58_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(0x58), reg, val);
-}
-
-uint32_t iosf_port59_read(int reg)
-{
- return iosf_read_port(IOSF_READ(0x59), reg);
-}
-
-void iosf_port59_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(0x59), reg, val);
-}
-
-uint32_t iosf_port5a_read(int reg)
-{
- return iosf_read_port(IOSF_READ(0x5a), reg);
-}
-
-void iosf_port5a_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(0x5a), reg, val);
-}
-
-uint32_t iosf_porta2_read(int reg)
-{
- return iosf_read_port(IOSF_READ(0xa2), reg);
-}
-
-void iosf_porta2_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(0xa2), reg, val);
-}
-
-uint32_t iosf_ssus_read(int reg)
-{
- return iosf_read_port(IOSF_READ(SSUS), reg);
-}
-
-void iosf_ssus_write(int reg, uint32_t val)
-{
- return iosf_write_port(IOSF_WRITE(SSUS), reg, val);
-}
diff --git a/src/soc/intel/fsp_baytrail/lpe.c b/src/soc/intel/fsp_baytrail/lpe.c
deleted file mode 100644
index 91f8880a18..0000000000
--- a/src/soc/intel/fsp_baytrail/lpe.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <device/mmio.h>
-#include <device/pci_ops.h>
-#include <cbmem.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <reg_script.h>
-
-#include <soc/iomap.h>
-#include <soc/iosf.h>
-#include <soc/lpc.h>
-#include <soc/nvs.h>
-#include <soc/pattrs.h>
-#include <soc/pci_devs.h>
-#include <soc/pmc.h>
-#include <soc/ramstage.h>
-#include "chip.h"
-
-
-/* The LPE audio devices needs 1MiB of memory reserved aligned to a 512MiB
- * address. Just take 1MiB @ 512MiB. */
-#define FIRMWARE_PHYS_BASE (512 << 20)
-#define FIRMWARE_PHYS_LENGTH (1 << 20)
-#define FIRMWARE_PCI_REG_BASE 0xa8
-#define FIRMWARE_PCI_REG_LENGTH 0xac
-#define FIRMWARE_REG_BASE_C0 0x144000
-#define FIRMWARE_REG_LENGTH_C0 (FIRMWARE_REG_BASE_C0 + 4)
-
-static void assign_device_nvs(struct device *dev, u32 *field, unsigned int index)
-{
- struct resource *res;
-
- res = find_resource(dev, index);
- if (res)
- *field = res->base;
-}
-
-static void lpe_enable_acpi_mode(struct device *dev)
-{
- static const struct reg_script ops[] = {
- /* Disable PCI interrupt, enable Memory and Bus Master */
- REG_PCI_OR32(PCI_COMMAND,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | (1<<10)),
- /* Enable ACPI mode */
- REG_IOSF_OR(IOSF_PORT_0x58, LPE_PCICFGCTR1,
- LPE_PCICFGCTR1_PCI_CFG_DIS |
- LPE_PCICFGCTR1_ACPI_INT_EN),
- REG_SCRIPT_END
- };
- global_nvs_t *gnvs;
-
- /* Find ACPI NVS to update BARs */
- gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS);
- if (!gnvs) {
- printk(BIOS_ERR, "Unable to locate Global NVS\n");
- return;
- }
-
- /* Save BAR0, BAR1, and firmware base to ACPI NVS */
- assign_device_nvs(dev, &gnvs->dev.lpe_bar0, PCI_BASE_ADDRESS_0);
- assign_device_nvs(dev, &gnvs->dev.lpe_bar1, PCI_BASE_ADDRESS_1);
- assign_device_nvs(dev, &gnvs->dev.lpe_fw, FIRMWARE_PCI_REG_BASE);
-
- /* Device is enabled in ACPI mode */
- gnvs->dev.lpe_en = 1;
-
- /* Put device in ACPI mode */
- reg_script_run_on_dev(dev, ops);
-}
-
-static void setup_codec_clock(struct device *dev)
-{
- uint32_t reg;
- u32 *clk_reg;
- struct soc_intel_fsp_baytrail_config *config;
- const char *freq_str;
-
- config = config_of(dev);
- switch (config->lpe_codec_clk_freq) {
- case 19:
- freq_str = "19.2";
- reg = CLK_FREQ_19P2MHZ;
- break;
- case 25:
- freq_str = "25";
- reg = CLK_FREQ_25MHZ;
- break;
- default:
- printk(BIOS_DEBUG, "LPE codec clock not required.\n");
- return;
- }
-
- /* Default to always running. */
- reg |= CLK_CTL_ON;
-
- if (config->lpe_codec_clk_num < 0 || config->lpe_codec_clk_num > 5) {
- printk(BIOS_DEBUG, "Invalid LPE codec clock number.\n");
- return;
- }
-
- printk(BIOS_DEBUG, "LPE Audio codec clock set to %sMHz.\n", freq_str);
-
- clk_reg = (u32 *)(PMC_BASE_ADDRESS + PLT_CLK_CTL_0);
- clk_reg += config->lpe_codec_clk_num;
-
- write32(clk_reg, (read32(clk_reg) & ~0x7) | reg);
-}
-
-static void lpe_stash_firmware_info(struct device *dev)
-{
- struct resource *res;
- struct resource *mmio;
- const struct pattrs *pattrs = pattrs_get();
-
- res = find_resource(dev, FIRMWARE_PCI_REG_BASE);
- if (res == NULL) {
- printk(BIOS_DEBUG, "LPE Firmware memory not found.\n");
- return;
- }
-
- /* Continue using old way of informing firmware address / size. */
- pci_write_config32(dev, FIRMWARE_PCI_REG_BASE, res->base);
- pci_write_config32(dev, FIRMWARE_PCI_REG_LENGTH, res->size);
-
- /* C0 and later steppings use an offset in the MMIO space. */
- if (pattrs->stepping >= STEP_C0) {
- mmio = find_resource(dev, PCI_BASE_ADDRESS_0);
- write32((u32 *)(uintptr_t)(mmio->base + FIRMWARE_REG_BASE_C0),
- res->base);
- write32((u32 *)(uintptr_t)(mmio->base + FIRMWARE_REG_LENGTH_C0),
- res->size);
- }
-}
-
-static void lpe_init(struct device *dev)
-{
- struct soc_intel_fsp_baytrail_config *config = config_of(dev);
-
- lpe_stash_firmware_info(dev);
-
- setup_codec_clock(dev);
-
- if (config->LpeAcpiModeEnable == LPE_ACPI_MODE_ENABLED)
- lpe_enable_acpi_mode(dev);
-}
-
-static void lpe_read_resources(struct device *dev)
-{
- pci_dev_read_resources(dev);
-
- reserved_ram_resource(dev, FIRMWARE_PCI_REG_BASE,
- FIRMWARE_PHYS_BASE >> 10,
- FIRMWARE_PHYS_LENGTH >> 10);
-}
-
-static const struct device_operations device_ops = {
- .read_resources = lpe_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = lpe_init,
- .enable = NULL,
- .scan_bus = NULL,
- .ops_pci = &soc_pci_ops,
-};
-
-static const struct pci_driver southcluster __pci_driver = {
- .ops = &device_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = LPE_DEVID,
-};
diff --git a/src/soc/intel/fsp_baytrail/lpss.c b/src/soc/intel/fsp_baytrail/lpss.c
deleted file mode 100644
index 2ad6fb3804..0000000000
--- a/src/soc/intel/fsp_baytrail/lpss.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <cbmem.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <reg_script.h>
-
-#include <soc/iosf.h>
-#include <soc/nvs.h>
-#include <soc/pci_devs.h>
-#include <soc/ramstage.h>
-
-#include "chip.h"
-
-static void dev_enable_acpi_mode(struct device *dev, int iosf_reg, int nvs_index)
-{
- struct reg_script ops[] = {
- /* Disable PCI interrupt, enable Memory and Bus Master */
- REG_PCI_OR32(PCI_COMMAND,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | (1<<10)),
- /* Enable ACPI mode */
- REG_IOSF_OR(IOSF_PORT_LPSS, iosf_reg,
- LPSS_CTL_PCI_CFG_DIS | LPSS_CTL_ACPI_INT_EN),
- REG_SCRIPT_END
- };
- struct resource *bar;
- global_nvs_t *gnvs;
-
- /* Find ACPI NVS to update BARs */
- gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS);
- if (!gnvs) {
- printk(BIOS_ERR, "Unable to locate Global NVS\n");
- return;
- }
-
- /* Save BAR0 and BAR1 to ACPI NVS */
- bar = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (bar)
- gnvs->dev.lpss_bar0[nvs_index] = (u32)bar->base;
-
- bar = find_resource(dev, PCI_BASE_ADDRESS_1);
- if (bar)
- gnvs->dev.lpss_bar1[nvs_index] = (u32)bar->base;
-
- /* Device is enabled in ACPI mode */
- gnvs->dev.lpss_en[nvs_index] = 1;
-
- /* Put device in ACPI mode */
- reg_script_run_on_dev(dev, ops);
-}
-
-static void dev_enable_snoop_and_pm(struct device *dev, int iosf_reg)
-{
- struct reg_script ops[] = {
- REG_IOSF_RMW(IOSF_PORT_LPSS, iosf_reg,
- ~(LPSS_CTL_SNOOP | LPSS_CTL_NOSNOOP),
- LPSS_CTL_SNOOP | LPSS_CTL_PM_CAP_PRSNT),
- REG_SCRIPT_END,
- };
-
- reg_script_run_on_dev(dev, ops);
-}
-
-static void dev_ctl_reg(struct device *dev, int *iosf_reg, int *nvs_index)
-{
- *iosf_reg = -1;
- *nvs_index = -1;
-#define SET_IOSF_REG(name_) \
- case PCI_DEVFN(name_ ## _DEV, name_ ## _FUNC): \
- *iosf_reg = LPSS_ ## name_ ## _CTL; \
- *nvs_index = LPSS_NVS_ ## name_
-
- switch (dev->path.pci.devfn) {
- SET_IOSF_REG(SIO_DMA1);
- break;
- SET_IOSF_REG(SIO_DMA2);
- break;
- SET_IOSF_REG(PWM1);
- break;
- SET_IOSF_REG(PWM2);
- break;
- SET_IOSF_REG(HSUART1);
- break;
- SET_IOSF_REG(HSUART2);
- break;
- SET_IOSF_REG(SPI);
- break;
- }
-}
-
-static void lpss_init(struct device *dev)
-{
- struct soc_intel_fsp_baytrail_config *config = config_of(dev);
- int iosf_reg, nvs_index;
-
- dev_ctl_reg(dev, &iosf_reg, &nvs_index);
-
- if (iosf_reg < 0) {
- int slot = PCI_SLOT(dev->path.pci.devfn);
- int func = PCI_FUNC(dev->path.pci.devfn);
- printk(BIOS_DEBUG, "Could not find iosf_reg for %02x.%01x\n",
- slot, func);
- return;
- }
- dev_enable_snoop_and_pm(dev, iosf_reg);
-
- if (config->PcdLpssSioEnablePciMode == LPSS_PCI_MODE_DISABLE)
- dev_enable_acpi_mode(dev, iosf_reg, nvs_index);
-}
-
-static struct device_operations device_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = lpss_init,
- .enable = NULL,
- .scan_bus = NULL,
- .ops_pci = &soc_pci_ops,
-};
-
-static const unsigned short pci_device_ids[] = {
- SIO_DMA1_DEVID,
- SIO_DMA2_DEVID,
- PWM1_DEVID,
- PWM2_DEVID,
- HSUART1_DEVID,
- HSUART2_DEVID,
- SPI_DEVID,
- 0,
-};
-
-static const struct pci_driver southcluster __pci_driver = {
- .ops = &device_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .devices = pci_device_ids,
-};
diff --git a/src/soc/intel/fsp_baytrail/memmap.c b/src/soc/intel/fsp_baytrail/memmap.c
deleted file mode 100644
index d8dcf49acb..0000000000
--- a/src/soc/intel/fsp_baytrail/memmap.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google, Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <cbmem.h>
-#include <cpu/x86/smm.h>
-#include <soc/iosf.h>
-#include <drivers/intel/fsp1_0/fsp_util.h>
-#include <types.h>
-
-static uintptr_t smm_region_start(void)
-{
- return (iosf_bunit_read(BUNIT_SMRRL) & 0xFFFF) << 20;
-}
-
-static size_t smm_region_size(void)
-{
- return CONFIG_SMM_TSEG_SIZE;
-}
-
-/** @brief get the top of usable low memory from the FSP's HOB list
- *
- * The FSP's reserved memory sits just below the SMM region. The memory
- * region below it is usable memory.
- *
- * The entire memory map is shown in northcluster.c
- *
- * @return pointer to the first byte of reserved memory
- */
-
-void *cbmem_top_chipset(void)
-{
- return find_fsp_reserved_mem(*(void **)CBMEM_FSP_HOB_PTR);
-}
-
-void smm_region(uintptr_t *start, size_t *size)
-{
- *start = smm_region_start();
- *size = smm_region_size();
-}
diff --git a/src/soc/intel/fsp_baytrail/northcluster.c b/src/soc/intel/fsp_baytrail/northcluster.c
deleted file mode 100644
index 474ba84890..0000000000
--- a/src/soc/intel/fsp_baytrail/northcluster.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <cpu/x86/smm.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <cpu/x86/lapic.h>
-#include <soc/iomap.h>
-#include <soc/iosf.h>
-#include <soc/pci_devs.h>
-#include <soc/ramstage.h>
-#include <cbmem.h>
-#include <soc/baytrail.h>
-#include <drivers/intel/fsp1_0/fsp_util.h>
-#include <arch/acpi.h>
-
-static const int legacy_hole_base_k = 0xa0000 / 1024;
-static const int legacy_hole_size_k = 384;
-
-/* Host Memory Map:
- *
- * +--------------------------+ BMBOUND_HI
- * | Usable DRAM |
- * +--------------------------+ 4GiB
- * | PCI Address Space |
- * +--------------------------+ BMBOUND
- * | TPM |
- * +--------------------------+ IMR2
- * | TXE |
- * +--------------------------+ IMR1
- * | iGD |
- * +--------------------------+
- * | GTT |
- * +--------------------------+ SMMRRH, IRM0
- * | TSEG |
- * +--------------------------+ SMMRRL
- * | FSP |
- * +--------------------------+ SMMRRL - 2MB
- * | Usable DRAM |
- * +--------------------------+ FFFFF
- * | ROM Area |
- * +--------------------------+ A0000
- * | Usable DRAM |
- * +--------------------------+ 0
- *
- * Note that there are really only a few regions that need to enumerated w.r.t.
- * coreboot's resource model:
- *
- * +--------------------------+ BMBOUND_HI
- * | Cacheable/Usable |
- * +--------------------------+ 4GiB
- *
- * +--------------------------+ BMBOUND
- * | Uncacheable/Reserved |
- * +--------------------------+ SMMRRH
- * | Cacheable/Reserved |
- * +--------------------------+ SMMRRL - 2MB
- * | Cacheable/Usable |
- * +--------------------------+ 0
- */
-
-/*
- * Get the top of low memory for use by ACPI
- */
-uint32_t nc_read_top_of_low_memory(void)
-{
- uint32_t fsp_mem_base = 0;
- GetLowMemorySize(&fsp_mem_base);
-
- return fsp_mem_base;
-}
-
-static int get_pcie_bar(u32 *base)
-{
- u32 pciexbar_reg;
-
- *base = 0;
-
- pciexbar_reg = iosf_bunit_read(BUNIT_MMCONF_REG);
-
- if (!(pciexbar_reg & (1 << 0)))
- return 0;
-
- *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
- (1 << 28));
- return 256;
-
-}
-
-static void add_fixed_resources(struct device *dev, int index)
-{
- struct resource *resource;
-
- resource = new_resource(dev, index++); /* Local APIC */
- resource->base = LAPIC_DEFAULT_BASE;
- resource->size = 0x00001000;
- resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE |
- IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
-
- mmio_resource(dev, index++, legacy_hole_base_k, legacy_hole_size_k);
-}
-
-static void mc_add_dram_resources(struct device *dev)
-{
- u32 bmbound, bsmmrrl;
- int index = 0;
- uint64_t highmem_size = 0;
- uint32_t fsp_mem_base = 0;
-
- GetHighMemorySize(&highmem_size);
- fsp_mem_base=(uint32_t)cbmem_top();
-
- bmbound = iosf_bunit_read(BUNIT_BMBOUND);
- bsmmrrl = iosf_bunit_read(BUNIT_SMRRL) << 20;
-
- if (bsmmrrl){
- printk(BIOS_DEBUG, "UMA, GTT & SMM memory location: 0x%x\n"
- "UMA, GTT & SMM memory size: %dM\n",
- bsmmrrl, (bmbound - bsmmrrl) >> 20);
-
- printk(BIOS_DEBUG, "FSP memory location: 0x%x\nFSP memory size: %dM\n",
- fsp_mem_base, (bsmmrrl - fsp_mem_base) >> 20);
- }
-
- printk(BIOS_INFO, "Available memory below 4GB: 0x%08x (%dM)\n",
- fsp_mem_base, fsp_mem_base >> 20);
-
- /* Report the memory regions. */
- ram_resource(dev, index++, 0, legacy_hole_base_k);
- ram_resource(dev, index++, legacy_hole_base_k + legacy_hole_size_k,
- ((fsp_mem_base >> 10) - (legacy_hole_base_k + legacy_hole_size_k)));
-
- /* Mark SMM & FSP regions reserved */
- mmio_resource(dev, index++, fsp_mem_base >> 10,
- (bmbound - fsp_mem_base) >> 10);
-
- if (highmem_size) {
- ram_resource(dev, index++, 0x100000000 >> 10, highmem_size >> 10);
- }
- printk(BIOS_INFO, "Available memory above 4GB: %lluM\n",
- highmem_size >> 20);
-
- add_fixed_resources(dev, index);
-}
-
-static void nc_read_resources(struct device *dev)
-{
- u32 pcie_config_base;
- int buses;
-
- /* Call the normal read_resources */
- pci_dev_read_resources(dev);
-
- /* We use 0xcf as an unused index for our PCIe bar so that we find it again */
- buses = get_pcie_bar(&pcie_config_base);
- if (buses) {
- struct resource *resource = new_resource(dev, 0xcf);
- mmconf_resource_init(resource, pcie_config_base, buses);
- }
-
- /* Calculate and add DRAM resources. */
- mc_add_dram_resources(dev);
-}
-
-static void nc_enable(struct device *dev)
-{
- print_fsp_info();
-}
-
-static struct device_operations nc_ops = {
- .read_resources = nc_read_resources,
- .acpi_fill_ssdt_generator = generate_cpu_entries,
- .set_resources = DEVICE_NOOP,
- .enable_resources = NULL,
- .init = NULL,
- .enable = &nc_enable,
- .scan_bus = NULL,
- .ops_pci = &soc_pci_ops,
-};
-
-static const struct pci_driver nc_driver __pci_driver = {
- .ops = &nc_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = SOC_DEVID,
-};
diff --git a/src/soc/intel/fsp_baytrail/placeholders.c b/src/soc/intel/fsp_baytrail/placeholders.c
deleted file mode 100644
index e9a8757557..0000000000
--- a/src/soc/intel/fsp_baytrail/placeholders.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/acpi.h>
-#include <device/pci_rom.h>
-#include <soc/acpi.h>
-
-
-void acpi_create_serialio_ssdt(acpi_header_t *ssdt) {}
-
-/* Rmodules don't like weak symbols. */
-u32 map_oprom_vendev(u32 vendev) { return vendev; }
diff --git a/src/soc/intel/fsp_baytrail/pmutil.c b/src/soc/intel/fsp_baytrail/pmutil.c
deleted file mode 100644
index 10838e3a99..0000000000
--- a/src/soc/intel/fsp_baytrail/pmutil.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <arch/io.h>
-#include <device/mmio.h>
-#include <device/pci_ops.h>
-#include <cbmem.h>
-#include <console/console.h>
-
-#include <soc/iomap.h>
-#include <soc/lpc.h>
-#include <soc/pci_devs.h>
-#include <soc/pmc.h>
-#include <security/vboot/vbnv.h>
-
-#if defined(__SIMPLE_DEVICE__)
-
-static const pci_devfn_t pcu_dev = PCI_DEV(0, PCU_DEV, 0);
-
-static inline pci_devfn_t get_pcu_dev(void)
-{
- return pcu_dev;
-}
-
-#else /* !__SIMPLE_DEVICE__ */
-#include <device/device.h>
-#include <device/pci.h>
-
-static struct device *pcu_dev;
-static struct device *get_pcu_dev(void)
-{
- if (pcu_dev == NULL)
- pcu_dev = pcidev_on_root(PCU_DEV, 0);
- return pcu_dev;
-}
-#endif
-
-uint16_t get_pmbase(void)
-{
- return pci_read_config16(get_pcu_dev(), ABASE) & 0xfff8;
-}
-
-static void print_num_status_bits(int num_bits, uint32_t status,
- const char *bit_names[])
-{
- int i;
-
- if (!status)
- return;
-
- for (i = num_bits - 1; i >= 0; i--) {
- if (status & (1 << i)) {
- if (bit_names[i])
- printk(BIOS_DEBUG, "%s ", bit_names[i]);
- else
- printk(BIOS_DEBUG, "BIT%d ", i);
- }
- }
-}
-
-static void print_status_bits(uint32_t status, const char *bit_names[])
-{
- print_num_status_bits(32, status, bit_names);
-}
-
-static uint32_t print_smi_status(uint32_t smi_sts)
-{
- static const char *smi_sts_bits[] = {
- [2] = "BIOS",
- [4] = "SLP_SMI",
- [5] = "APM",
- [6] = "SWSMI_TMR",
- [8] = "PM1",
- [9] = "GPE0",
- [12] = "DEVMON",
- [13] = "TCO",
- [14] = "PERIODIC",
- [15] = "ILB",
- [16] = "SMBUS_SMI",
- [17] = "LEGACY_USB2",
- [18] = "INTEL_USB2",
- [20] = "PCI_EXP_SMI",
- [26] = "SPI",
- [28] = "PUNIT",
- [29] = "GUNIT",
- };
-
- if (!smi_sts)
- return 0;
-
- printk(BIOS_DEBUG, "SMI_STS: ");
- print_status_bits(smi_sts, smi_sts_bits);
- printk(BIOS_DEBUG, "\n");
-
- return smi_sts;
-}
-
-static uint32_t reset_smi_status(void)
-{
- uint16_t pmbase = get_pmbase();
- uint32_t smi_sts = inl(pmbase + SMI_STS);
- outl(smi_sts, pmbase + SMI_STS);
- return smi_sts;
-}
-
-uint32_t clear_smi_status(void)
-{
- return print_smi_status(reset_smi_status());
-}
-
-void enable_smi(uint32_t mask)
-{
- uint16_t pmbase = get_pmbase();
- uint32_t smi_en = inl(pmbase + SMI_EN);
- smi_en |= mask;
- outl(smi_en, pmbase + SMI_EN);
-}
-
-void disable_smi(uint32_t mask)
-{
- uint16_t pmbase = get_pmbase();
- uint32_t smi_en = inl(pmbase + SMI_EN);
- smi_en &= ~mask;
- outl(smi_en, pmbase + SMI_EN);
-}
-
-void enable_pm1_control(uint32_t mask)
-{
- uint16_t pmbase = get_pmbase();
- uint32_t pm1_cnt = inl(pmbase + PM1_CNT);
- pm1_cnt |= mask;
- outl(pm1_cnt, pmbase + PM1_CNT);
-}
-
-void disable_pm1_control(uint32_t mask)
-{
- uint16_t pmbase = get_pmbase();
- uint32_t pm1_cnt = inl(pmbase + PM1_CNT);
- pm1_cnt &= ~mask;
- outl(pm1_cnt, pmbase + PM1_CNT);
-}
-
-static uint16_t reset_pm1_status(void)
-{
- uint16_t pmbase = get_pmbase();
- uint16_t pm1_sts = inw(pmbase + PM1_STS);
- outw(pm1_sts, pmbase + PM1_STS);
- return pm1_sts;
-}
-
-static uint16_t print_pm1_status(uint16_t pm1_sts)
-{
- static const char *pm1_sts_bits[] = {
- [0] = "TMROF",
- [5] = "GBL",
- [8] = "PWRBTN",
- [10] = "RTC",
- [11] = "PRBTNOR",
- [13] = "USB",
- [14] = "PCIEXPWAK",
- [15] = "WAK",
- };
-
- if (!pm1_sts)
- return 0;
-
- printk(BIOS_SPEW, "PM1_STS: ");
- print_status_bits(pm1_sts, pm1_sts_bits);
- printk(BIOS_SPEW, "\n");
-
- return pm1_sts;
-}
-
-uint16_t clear_pm1_status(void)
-{
- return print_pm1_status(reset_pm1_status());
-}
-
-void enable_pm1(uint16_t events)
-{
- outw(events, get_pmbase() + PM1_EN);
-}
-
-static uint32_t print_tco_status(uint32_t tco_sts)
-{
- static const char *tco_sts_bits[] = {
- [3] = "TIMEOUT",
- [17] = "SECOND_TO",
- };
-
- if (!tco_sts)
- return 0;
-
- printk(BIOS_DEBUG, "TCO_STS: ");
- print_status_bits(tco_sts, tco_sts_bits);
- printk(BIOS_DEBUG, "\n");
-
- return tco_sts;
-}
-
-static uint32_t reset_tco_status(void)
-{
- uint16_t pmbase = get_pmbase();
- uint32_t tco_sts = inl(pmbase + TCO_STS);
- uint32_t tco_en = inl(pmbase + TCO1_CNT);
-
- outl(tco_sts, pmbase + TCO_STS);
- return tco_sts & tco_en;
-}
-
-uint32_t clear_tco_status(void)
-{
- return print_tco_status(reset_tco_status());
-}
-
-void enable_gpe(uint32_t mask)
-{
- uint16_t pmbase = get_pmbase();
- uint32_t gpe0_en = inl(pmbase + GPE0_EN);
- gpe0_en |= mask;
- outl(gpe0_en, pmbase + GPE0_EN);
-}
-
-void disable_gpe(uint32_t mask)
-{
- uint16_t pmbase = get_pmbase();
- uint32_t gpe0_en = inl(pmbase + GPE0_EN);
- gpe0_en &= ~mask;
- outl(gpe0_en, pmbase + GPE0_EN);
-}
-
-void disable_all_gpe(void)
-{
- disable_gpe(~0);
-}
-
-
-static uint32_t reset_gpe_status(void)
-{
- uint16_t pmbase = get_pmbase();
- uint32_t gpe_sts = inl(pmbase + GPE0_STS);
- outl(gpe_sts, pmbase + GPE0_STS);
- return gpe_sts;
-}
-
-static uint32_t print_gpe_sts(uint32_t gpe_sts)
-{
- static const char *gpe_sts_bits[] = {
- [1] = "HOTPLUG",
- [2] = "SWGPE",
- [3] = "PCIE_WAKE0",
- [4] = "PUNIT",
- [5] = "GUNIT",
- [6] = "PCIE_WAKE1",
- [7] = "PCIE_WAKE2",
- [8] = "PCIE_WAKE3",
- [9] = "PCI_EXP",
- [10] = "BATLOW",
- [13] = "PME_B0",
- [16] = "SUS_GPIO_0",
- [17] = "SUS_GPIO_1",
- [18] = "SUS_GPIO_2",
- [19] = "SUS_GPIO_3",
- [20] = "SUS_GPIO_4",
- [21] = "SUS_GPIO_5",
- [22] = "SUS_GPIO_6",
- [23] = "SUS_GPIO_7",
- [24] = "CORE_GPIO_0",
- [25] = "CORE_GPIO_1",
- [26] = "CORE_GPIO_2",
- [27] = "CORE_GPIO_3",
- [28] = "CORE_GPIO_4",
- [29] = "CORE_GPIO_5",
- [30] = "CORE_GPIO_6",
- [31] = "CORE_GPIO_7",
- };
-
- if (!gpe_sts)
- return gpe_sts;
-
- printk(BIOS_DEBUG, "GPE0a_STS: ");
- print_status_bits(gpe_sts, gpe_sts_bits);
- printk(BIOS_DEBUG, "\n");
-
- return gpe_sts;
-}
-
-uint32_t clear_gpe_status(void)
-{
- return print_gpe_sts(reset_gpe_status());
-}
-
-static uint32_t reset_alt_status(void)
-{
- uint16_t pmbase = get_pmbase();
- uint32_t alt_gpio_smi = inl(pmbase + ALT_GPIO_SMI);
- outl(alt_gpio_smi, pmbase + ALT_GPIO_SMI);
- return alt_gpio_smi;
-}
-
-static uint32_t print_alt_sts(uint32_t alt_gpio_smi)
-{
- uint32_t alt_gpio_sts;
- static const char *alt_gpio_smi_sts_bits[] = {
- [0] = "SUS_GPIO_0",
- [1] = "SUS_GPIO_1",
- [2] = "SUS_GPIO_2",
- [3] = "SUS_GPIO_3",
- [4] = "SUS_GPIO_4",
- [5] = "SUS_GPIO_5",
- [6] = "SUS_GPIO_6",
- [7] = "SUS_GPIO_7",
- [8] = "CORE_GPIO_0",
- [9] = "CORE_GPIO_1",
- [10] = "CORE_GPIO_2",
- [11] = "CORE_GPIO_3",
- [12] = "CORE_GPIO_4",
- [13] = "CORE_GPIO_5",
- [14] = "CORE_GPIO_6",
- [15] = "CORE_GPIO_7",
- };
-
- /* Status bits are in the upper 16 bits. */
- alt_gpio_sts = alt_gpio_smi >> 16;
- if (!alt_gpio_sts)
- return alt_gpio_smi;
-
- printk(BIOS_DEBUG, "ALT_GPIO_SMI: ");
- print_num_status_bits(16, alt_gpio_sts, alt_gpio_smi_sts_bits);
- printk(BIOS_DEBUG, "\n");
-
- return alt_gpio_smi;
-}
-
-uint32_t clear_alt_status(void)
-{
- return print_alt_sts(reset_alt_status());
-}
-
-void clear_pmc_status(void)
-{
- uint32_t prsts;
- uint32_t gen_pmcon1;
-
- prsts = read32((u32 *)(PMC_BASE_ADDRESS + PRSTS));
- gen_pmcon1 = read32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1));
-
- /* Clear the status bits. The RPS field is cleared on a 0 write. */
- write32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1), gen_pmcon1 & ~RPS);
- write32((u32 *)(PMC_BASE_ADDRESS + PRSTS), prsts);
-}
-
-int vbnv_cmos_failed(void)
-{
- uint32_t gen_pmcon1;
- int rtc_fail;
- struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE);
-
- if (ps != NULL)
- gen_pmcon1 = ps->gen_pmcon1;
- else
- gen_pmcon1 = read32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1));
-
- rtc_fail = !!(gen_pmcon1 & RPS);
-
- if (rtc_fail)
- printk(BIOS_DEBUG, "RTC failure.\n");
-
- return rtc_fail;
-}
diff --git a/src/soc/intel/fsp_baytrail/ramstage.c b/src/soc/intel/fsp_baytrail/ramstage.c
deleted file mode 100644
index 754c5f5c45..0000000000
--- a/src/soc/intel/fsp_baytrail/ramstage.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/cpu.h>
-#include <arch/acpi.h>
-#include <cbmem.h>
-#include <console/console.h>
-#include <cpu/intel/microcode.h>
-#include <cpu/x86/cr.h>
-#include <cpu/x86/msr.h>
-#include <device/device.h>
-#include <device/pci_def.h>
-#include <device/pci_ops.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <soc/gpio.h>
-#include <soc/lpc.h>
-#include <soc/nvs.h>
-#include <soc/msr.h>
-#include <soc/pattrs.h>
-#include <soc/pci_devs.h>
-#include <soc/ramstage.h>
-
-/* Global PATTRS */
-DEFINE_PATTRS;
-
-#define SHOW_PATTRS 1
-
-static void detect_num_cpus(struct pattrs *attrs)
-{
- int ecx = 0;
-
- while (1) {
- struct cpuid_result leaf_b;
-
- leaf_b = cpuid_ext(0xb, ecx);
-
- /* Bay Trail doesn't have hyperthreading so just determine the
- * number of cores by from level type (ecx[15:8] == * 2). */
- if ((leaf_b.ecx & 0xff00) == 0x0200) {
- attrs->num_cpus = leaf_b.ebx & 0xffff;
- break;
- }
- ecx++;
- }
-}
-
-static inline void fill_in_msr(msr_t *msr, int idx)
-{
- *msr = rdmsr(idx);
- if (SHOW_PATTRS) {
- printk(BIOS_DEBUG, "msr(%x) = %08x%08x\n",
- idx, msr->hi, msr->lo);
- }
-}
-
-static const char *stepping_str[] = {
- "A0", "A1", "B0", "B1", "B2", "B3", "C0", "D0",
-};
-
-static void fill_in_pattrs(void)
-{
- struct device *dev;
- msr_t msr;
- struct pattrs *attrs = (struct pattrs *)pattrs_get();
-
- attrs->cpuid = cpuid_eax(1);
- dev = pcidev_on_root(LPC_DEV, LPC_FUNC);
- attrs->revid = pci_read_config8(dev, REVID);
- /* The revision to stepping IDs have two values per metal stepping. */
- if (attrs->revid >= RID_D_STEPPING_START) {
- attrs->stepping = (attrs->revid - RID_D_STEPPING_START) / 2;
- attrs->stepping += STEP_D0;
- } else if (attrs->revid >= RID_C_STEPPING_START) {
- attrs->stepping = (attrs->revid - RID_C_STEPPING_START) / 2;
- attrs->stepping += STEP_C0;
- } else if (attrs->revid >= RID_B_STEPPING_START) {
- attrs->stepping = (attrs->revid - RID_B_STEPPING_START) / 2;
- attrs->stepping += STEP_B0;
- } else {
- attrs->stepping = (attrs->revid - RID_A_STEPPING_START) / 2;
- attrs->stepping += STEP_A0;
- }
-
- attrs->microcode_patch = intel_microcode_find();
- attrs->address_bits = cpuid_eax(0x80000008) & 0xff;
- detect_num_cpus(attrs);
-
- if (SHOW_PATTRS) {
- printk(BIOS_DEBUG,
- "CPUID: %08x\nCores: %d\nRevision ID: %02x\nStepping: %s\n",
- attrs->cpuid, attrs->num_cpus, attrs->revid,
- (attrs->stepping >= ARRAY_SIZE(stepping_str)) ? "??" :
- stepping_str[attrs->stepping]);
- }
-
- fill_in_msr(&attrs->platform_id, IA32_PLATFORM_ID);
- fill_in_msr(&attrs->platform_info, MSR_PLATFORM_INFO);
-
- /* Set IA core speed ratio and voltages */
- msr = rdmsr(MSR_IACORE_RATIOS);
- attrs->iacore_ratios[IACORE_MIN] = msr.lo & 0x7f;
- attrs->iacore_ratios[IACORE_LFM] = (msr.lo >> 8) & 0x7f;
- attrs->iacore_ratios[IACORE_MAX] = (msr.lo >> 16) & 0x7f;
- msr = rdmsr(MSR_IACORE_TURBO_RATIOS);
- attrs->iacore_ratios[IACORE_TURBO] = (msr.lo & 0xff); /* 1 core max */
-
- msr = rdmsr(MSR_IACORE_VIDS);
- attrs->iacore_vids[IACORE_MIN] = msr.lo & 0x7f;
- attrs->iacore_vids[IACORE_LFM] = (msr.lo >> 8) & 0x7f;
- attrs->iacore_vids[IACORE_MAX] = (msr.lo >> 16) & 0x7f;
- msr = rdmsr(MSR_IACORE_TURBO_VIDS);
- attrs->iacore_vids[IACORE_TURBO] = (msr.lo & 0xff); /* 1 core max */
-
- /* Set bus clock speed */
- attrs->bclk_khz = bus_freq_khz();
-}
-
-static void s3_resume_prepare(void)
-{
- global_nvs_t *gnvs;
-
- gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof(global_nvs_t));
- if (gnvs == NULL)
- return;
-
- if (!acpi_is_wakeup_s3())
- memset(gnvs, 0, sizeof(global_nvs_t));
-}
-
-void baytrail_init_pre_device(void)
-{
- struct soc_gpio_config *config;
-
- fill_in_pattrs();
-
- /* Allow for SSE instructions to be executed. */
- write_cr4(read_cr4() | CR4_OSFXSR | CR4_OSXMMEXCPT);
-
- /* Indicate S3 resume to rest of ramstage. */
- s3_resume_prepare();
-
- /* Get GPIO initial states from mainboard */
- config = mainboard_get_gpios();
- setup_soc_gpios(config);
-}
diff --git a/src/soc/intel/fsp_baytrail/romstage/Makefile.inc b/src/soc/intel/fsp_baytrail/romstage/Makefile.inc
deleted file mode 100644
index c47dfb5c16..0000000000
--- a/src/soc/intel/fsp_baytrail/romstage/Makefile.inc
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2013 Google Inc.
-# Copyright (C) 2014 Sage Electronic Engineering, LLC.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-
-romstage-y += romstage.c
-romstage-y += pmc.c
-romstage-y += report_platform.c
-romstage-$(CONFIG_ENABLE_BUILTIN_COM1) += uart.c
diff --git a/src/soc/intel/fsp_baytrail/romstage/pmc.c b/src/soc/intel/fsp_baytrail/romstage/pmc.c
deleted file mode 100644
index dab31bf314..0000000000
--- a/src/soc/intel/fsp_baytrail/romstage/pmc.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stddef.h>
-#include <arch/io.h>
-#include <device/device.h>
-#include <device/pci_def.h>
-#include <soc/iomap.h>
-#include <soc/iosf.h>
-#include <soc/lpc.h>
-#include <soc/pci_devs.h>
-#include <soc/pmc.h>
-#include <soc/romstage.h>
-#include "../chip.h"
-
-void tco_disable(void)
-{
- uint32_t reg;
-
- reg = inl(ACPI_BASE_ADDRESS + TCO1_CNT);
- reg |= TCO_TMR_HALT;
- outl(reg, ACPI_BASE_ADDRESS + TCO1_CNT);
-}
diff --git a/src/soc/intel/fsp_baytrail/romstage/report_platform.c b/src/soc/intel/fsp_baytrail/romstage/report_platform.c
deleted file mode 100644
index 2b5dad7ab7..0000000000
--- a/src/soc/intel/fsp_baytrail/romstage/report_platform.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Google Inc.
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/pci_ops.h>
-#include <soc/iosf.h>
-#include <soc/baytrail.h>
-#include <cpu/x86/msr.h>
-#include <soc/msr.h>
-#include <cpu/x86/name.h>
-
-static void print_dram_info(void)
-{
- const int mrc_ver_reg = 0xf0;
- const uint32_t soc_dev = PCI_DEV(0, SOC_DEV, SOC_FUNC);
- uint32_t reg;
- int num_channels;
- int speed;
- uint32_t ch0;
- uint32_t ch1;
-
- reg = pci_read_config32(soc_dev, mrc_ver_reg);
-
- printk(BIOS_INFO, "MRC v%d.%02d\n", (reg >> 8) & 0xff, reg & 0xff);
-
- /* Number of channels enabled and DDR3 type. Determine number of
- * channels by the keying of the rank enable bits [3:0]. * */
- ch0 = iosf_dunit_ch0_read(DRP);
- ch1 = iosf_dunit_ch1_read(DRP);
- num_channels = 0;
- if (ch0 & DRP_RANK_MASK)
- num_channels++;
- if (ch1 & DRP_RANK_MASK)
- num_channels++;
-
- printk(BIOS_INFO, "%d channels of %sDDR3 @ ", num_channels,
- (reg & (1 << 22)) ? "LP" : "");
-
- /* DRAM frequency -- all channels run at same frequency. */
- reg = iosf_dunit_read(DTR0);
- switch (reg & 0x3) {
- case 0:
- speed = 800; break;
- case 1:
- speed = 1066; break;
- case 2:
- speed = 1333; break;
- case 3:
- speed = 1600; break;
- }
- printk(BIOS_INFO, "%dMHz\n", speed);
-}
-
-#define VARIANT_ID_BYTE 18
-#define VARIANT_ID_MASK 7
-void report_platform_info(void)
-{
- const char *baytrail_variants[4] = {
- "Bay Trail-I (ISG/embedded)",
- "Bay Trail-T (Tablet)",
- "Bay Trail-D (Desktop)",
- "Bay Trail-M (Mobile)",
- };
- msr_t platform_id = rdmsr(IA32_PLATFORM_ID);
- uint8_t variant = (platform_id.hi >> VARIANT_ID_BYTE) & VARIANT_ID_MASK;
-
- printk(BIOS_INFO, "Baytrail Chip Variant: %s\n", variant < 4 ?
- baytrail_variants[variant] : "Unknown");
- print_dram_info();
-
-}
diff --git a/src/soc/intel/fsp_baytrail/romstage/romstage.c b/src/soc/intel/fsp_baytrail/romstage/romstage.c
deleted file mode 100644
index f347591599..0000000000
--- a/src/soc/intel/fsp_baytrail/romstage/romstage.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stddef.h>
-#include <arch/io.h>
-#include <device/mmio.h>
-#include <device/pci_ops.h>
-#include <arch/cbfs.h>
-#include <arch/early_variables.h>
-#include <console/console.h>
-#include <console/usb.h>
-#include <cbmem.h>
-#include <cpu/x86/mtrr.h>
-#include <cpu/x86/smm.h>
-#include <program_loading.h>
-#include <romstage_handoff.h>
-#include <timestamp.h>
-#include <soc/gpio.h>
-#include <soc/iomap.h>
-#include <soc/lpc.h>
-#include <soc/pci_devs.h>
-#include <soc/romstage.h>
-#include <soc/acpi.h>
-#include <soc/baytrail.h>
-#include <drivers/intel/fsp1_0/fsp_util.h>
-#include <soc/pmc.h>
-#include <soc/spi.h>
-#include <version.h>
-#include <pc80/mc146818rtc.h>
-#include <device/pci_def.h>
-#include <security/vboot/vboot_common.h>
-
-/* Return 0, 3, 4 or 5 to indicate the previous sleep state. */
-uint32_t chipset_prev_sleep_state(uint32_t clear)
-{
- /* Default to S0. */
- uint32_t prev_sleep_state = ACPI_S0;
- uint32_t pm1_sts;
- uint32_t pm1_cnt;
- uint32_t gen_pmcon1;
-
- /* Read Power State */
- pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS);
- pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT);
- gen_pmcon1 = read32((u32 *)(PMC_BASE_ADDRESS + GEN_PMCON1));
-
- printk(BIOS_DEBUG, "PM1_STS = 0x%x PM1_CNT = 0x%x GEN_PMCON1 = 0x%x\n",
- pm1_sts, pm1_cnt, gen_pmcon1);
-
- if (pm1_sts & WAK_STS) {
- switch (acpi_sleep_from_pm1(pm1_cnt)) {
- case ACPI_S3:
- if (CONFIG(HAVE_ACPI_RESUME))
- prev_sleep_state = ACPI_S3;
- break;
- case ACPI_S4:
- prev_sleep_state = ACPI_S4;
- break;
-
- case ACPI_S5:
- prev_sleep_state = ACPI_S5;
- break;
- }
- /* If set Clear SLP_TYP. */
- if (clear == 1) {
- outl(pm1_cnt & ~(SLP_TYP), ACPI_BASE_ADDRESS + PM1_CNT);
- }
- }
-
- if (gen_pmcon1 & (PWR_FLR | SUS_PWR_FLR)) {
- prev_sleep_state = ACPI_S5;
- }
-
- return prev_sleep_state;
-}
-
-static void program_base_addresses(void)
-{
- uint32_t reg;
-
- /* Memory Mapped IO registers. */
- reg = PMC_BASE_ADDRESS | SET_BAR_ENABLE;
- pci_write_config32(LPC_BDF, PBASE, reg);
- reg = IO_BASE_ADDRESS | SET_BAR_ENABLE;
- pci_write_config32(LPC_BDF, IOBASE, reg);
- reg = ILB_BASE_ADDRESS | SET_BAR_ENABLE;
- pci_write_config32(LPC_BDF, IBASE, reg);
- reg = SPI_BASE_ADDRESS | SET_BAR_ENABLE;
- pci_write_config32(LPC_BDF, SBASE, reg);
- reg = MPHY_BASE_ADDRESS | SET_BAR_ENABLE;
- pci_write_config32(LPC_BDF, MPBASE, reg);
- reg = PUNIT_BASE_ADDRESS | SET_BAR_ENABLE;
- pci_write_config32(LPC_BDF, PUBASE, reg);
- reg = RCBA_BASE_ADDRESS | RCBA_ENABLE;
- pci_write_config32(LPC_BDF, RCBA, reg);
-
- /* IO Port Registers. */
- reg = ACPI_BASE_ADDRESS | SET_BAR_ENABLE;
- pci_write_config32(LPC_BDF, ABASE, reg);
- reg = GPIO_BASE_ADDRESS | SET_BAR_ENABLE;
- pci_write_config32(LPC_BDF, GBASE, reg);
-}
-
-static void spi_init(void)
-{
- uint32_t *scs = (uint32_t *)(SPI_BASE_ADDRESS + SCS);
- uint32_t *bcr = (uint32_t *)(SPI_BASE_ADDRESS + BCR);
- uint32_t reg;
-
- /* Disable generating SMI when setting WPD bit. */
- write32(scs, read32(scs) & ~SMIWPEN);
- /*
- * Enable caching and prefetching in the SPI controller. Disable
- * the SMM-only BIOS write and set WPD bit.
- */
- reg = (read32(bcr) & ~SRC_MASK) | SRC_CACHE_PREFETCH | BCR_WPD;
- reg &= ~EISS;
- write32(bcr, reg);
-}
-
-static void baytrail_rtc_init(void)
-{
- uint32_t *pbase = (uint32_t *)(pci_read_config32(LPC_BDF, PBASE) & 0xfffffff0);
- uint32_t gen_pmcon1 = read32(pbase + (GEN_PMCON1/sizeof(u32)));
- int rtc_failed = !!(gen_pmcon1 & RPS);
-
- if (rtc_failed) {
- printk(BIOS_DEBUG,
- "RTC Failure detected. Resetting Date to %s\n",
- coreboot_dmi_date);
-
- write32((uint32_t *)(DEFAULT_PBASE + GEN_PMCON1), gen_pmcon1 & ~RPS);
- }
-
- cmos_init(rtc_failed);
-}
-
-/* Entry from cache-as-ram.inc. */
-void main(FSP_INFO_HEADER *fsp_info_header)
-{
- uint32_t *func_dis = (uint32_t *)(PMC_BASE_ADDRESS + FUNC_DIS);
- uint32_t *func_dis2 = (uint32_t *)(PMC_BASE_ADDRESS + FUNC_DIS2);
- uint32_t fd_mask = 0;
- uint32_t fd2_mask = 0;
-
- post_code(0x40);
-
- timestamp_init(get_initial_timestamp());
- timestamp_add_now(TS_START_ROMSTAGE);
-
- program_base_addresses();
-
- post_code(0x41);
- tco_disable();
-
- post_code(0x42);
- if (CONFIG(ENABLE_BUILTIN_COM1))
- byt_config_com1_and_enable();
-
- post_code(0x43);
- console_init();
-
- spi_init();
- baytrail_rtc_init();
-
- /* Call into mainboard. */
- early_mainboard_romstage_entry();
-
- set_max_freq();
-
- post_code(0x44);
-
- /* Program any required function disables */
- get_func_disables(&fd_mask, &fd2_mask);
-
- if (fd_mask != 0) {
- write32(func_dis, read32(func_dis) | fd_mask);
- /* Ensure posted write hits. */
- read32(func_dis);
- }
-
- if (fd2_mask != 0) {
- write32(func_dis2, read32(func_dis2) | fd2_mask);
- /* Ensure posted write hits. */
- read32(func_dis2);
- }
-
- post_code(0x47);
-
- timestamp_add_now(TS_BEFORE_INITRAM);
-
- /*
- * Call early init to initialize memory and chipset. This function returns
- * to the romstage_main_continue function with a pointer to the HOB
- * structure.
- */
- post_code(0x48);
- printk(BIOS_DEBUG, "Starting the Intel FSP (early_init)\n");
- fsp_early_init(fsp_info_header);
- die_with_post_code(POST_INVALID_VENDOR_BINARY,
- "Uh Oh! fsp_early_init should not return here.\n");
-}
-
-/*******************************************************************************
- * The FSP early_init function returns to this function.
- * Memory is setup and the stack is set by the FSP.
- */
-void romstage_main_continue(EFI_STATUS status, void *hob_list_ptr)
-{
- void *cbmem_hob_ptr;
- uint32_t prev_sleep_state;
-
- timestamp_add_now(TS_AFTER_INITRAM);
-
- post_code(0x4a);
- printk(BIOS_DEBUG, "%s status: %x hob_list_ptr: %x\n",
- __func__, (u32) status, (u32) hob_list_ptr);
-
- /* FSP reconfigures USB, so reinit it to have debug */
- if (CONFIG(USBDEBUG_IN_PRE_RAM))
- usbdebug_hw_init(true);
-
- printk(BIOS_DEBUG, "FSP Status: 0x%0x\n", (u32)status);
-
- /* Get previous sleep state again and clear */
- prev_sleep_state = chipset_prev_sleep_state(1);
- printk(BIOS_DEBUG, "%s: prev_sleep_state = S%d\n", __func__, prev_sleep_state);
-
- report_platform_info();
-
- post_code(0x4b);
-
- late_mainboard_romstage_entry();
- post_code(0x4c);
-
- cbmem_recovery(prev_sleep_state == ACPI_S3);
-
- /* Save the HOB pointer in CBMEM to be used in ramstage*/
- cbmem_hob_ptr = cbmem_add(CBMEM_ID_HOB_POINTER, sizeof(*hob_list_ptr));
- if (cbmem_hob_ptr == NULL)
- die("Could not allocate cbmem for HOB pointer");
- *(u32*)cbmem_hob_ptr = (u32)hob_list_ptr;
- post_code(0x4e);
-
- romstage_handoff_init(prev_sleep_state == ACPI_S3);
-
- if (CONFIG(SMM_TSEG))
- smm_list_regions();
-
- /* Load the ramstage. */
- post_code(0x4f);
- run_ramstage();
- while (1);
-}
-
-uint64_t get_initial_timestamp(void)
-{
- return 0;
-}
-
-int vboot_platform_is_resuming(void)
-{
- return !!romstage_handoff_is_resume();
-}
diff --git a/src/soc/intel/fsp_baytrail/romstage/uart.c b/src/soc/intel/fsp_baytrail/romstage/uart.c
deleted file mode 100644
index dbd6e9df10..0000000000
--- a/src/soc/intel/fsp_baytrail/romstage/uart.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <device/pci_ops.h>
-#include <soc/gpio.h>
-#include <soc/iomap.h>
-#include <soc/lpc.h>
-#include <soc/pci_devs.h>
-#include <soc/romstage.h>
-
-void byt_config_com1_and_enable(void)
-{
- uint32_t reg;
-
- /* Enable the legacy UART hardware. */
- reg = 1;
- pci_write_config32(PCI_DEV(0, LPC_DEV, 0), UART_CONT, reg);
-
- /* Set up the pads to select the UART function */
- score_select_func(UART_RXD_PAD, 1);
- score_select_func(UART_TXD_PAD, 1);
-}
diff --git a/src/soc/intel/fsp_baytrail/smihandler.c b/src/soc/intel/fsp_baytrail/smihandler.c
deleted file mode 100644
index 1a8fb4b6e6..0000000000
--- a/src/soc/intel/fsp_baytrail/smihandler.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <stdlib.h>
-#include <arch/io.h>
-#include <device/pci_ops.h>
-#include <console/console.h>
-#include <cpu/x86/cache.h>
-#include <cpu/x86/smm.h>
-#include <cpu/intel/em64t100_save_state.h>
-#include <device/pci_def.h>
-#include <elog.h>
-#include <halt.h>
-
-#include <soc/pci_devs.h>
-#include <soc/pmc.h>
-#include <soc/nvs.h>
-
-/* GNVS needs to be set by coreboot initiating a software SMI. */
-static global_nvs_t *gnvs;
-static int smm_initialized;
-
-int southbridge_io_trap_handler(int smif)
-{
- switch (smif) {
- case 0x32:
- printk(BIOS_DEBUG, "OS Init\n");
- /* gnvs->smif:
- * On success, the IO Trap Handler returns 0
- * On failure, the IO Trap Handler returns a value != 0
- */
- gnvs->smif = 0;
- return 1; /* IO trap handled */
- }
-
- /* Not handled */
- return 0;
-}
-
-void southbridge_smi_set_eos(void)
-{
- enable_smi(EOS);
-}
-
-global_nvs_t *smm_get_gnvs(void)
-{
- return gnvs;
-}
-
-static void busmaster_disable_on_bus(int bus)
-{
- int slot, func;
- unsigned int val;
- unsigned char hdr;
-
- for (slot = 0; slot < 0x20; slot++) {
- for (func = 0; func < 8; func++) {
- u32 reg32;
- pci_devfn_t dev = PCI_DEV(bus, slot, func);
-
- val = pci_read_config32(dev, PCI_VENDOR_ID);
-
- if (val == 0xffffffff || val == 0x00000000 ||
- val == 0x0000ffff || val == 0xffff0000)
- continue;
-
- /* Disable Bus Mastering for this one device */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 &= ~PCI_COMMAND_MASTER;
- pci_write_config32(dev, PCI_COMMAND, reg32);
-
- /* If this is a bridge, then follow it. */
- hdr = pci_read_config8(dev, PCI_HEADER_TYPE);
- hdr &= 0x7f;
- if (hdr == PCI_HEADER_TYPE_BRIDGE ||
- hdr == PCI_HEADER_TYPE_CARDBUS) {
- unsigned int buses;
- buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
- busmaster_disable_on_bus((buses >> 8) & 0xff);
- }
- }
- }
-}
-
-static void southbridge_smi_sleep(void)
-{
- uint32_t reg32;
- uint8_t slp_typ;
- uint16_t pmbase = get_pmbase();
-
- /* First, disable further SMIs */
- disable_smi(SLP_SMI_EN);
-
- /* Figure out SLP_TYP */
- reg32 = inl(pmbase + PM1_CNT);
- printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32);
- slp_typ = acpi_sleep_from_pm1(reg32);
-
- /* Do any mainboard sleep handling */
- mainboard_smi_sleep(slp_typ);
-
- /* Log S3, S4, and S5 entry */
- if (slp_typ >= ACPI_S3)
- elog_gsmi_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ);
-
- /* Next, do the deed.
- */
-
- switch (slp_typ) {
- case ACPI_S0:
- printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n");
- break;
- case ACPI_S1:
- printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n");
- break;
- case ACPI_S3:
- printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
-
- /* Invalidate the cache before going to S3 */
- wbinvd();
- break;
- case ACPI_S4:
- printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n");
- break;
- case ACPI_S5:
- printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
-
- /* Disable all GPE */
- disable_all_gpe();
-
- /* also iterates over all bridges on bus 0 */
- busmaster_disable_on_bus(0);
- break;
- default:
- printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n");
- break;
- }
-
- /* Write back to the SLP register to cause the originally intended
- * event again. We need to set BIT13 (SLP_EN) though to make the
- * sleep happen.
- */
- enable_pm1_control(SLP_EN);
-
- /* Make sure to stop executing code here for S3/S4/S5 */
- if (slp_typ >= ACPI_S3)
- halt();
-
- /* In most sleep states, the code flow of this function ends at
- * the line above. However, if we entered sleep state S1 and wake
- * up again, we will continue to execute code in this function.
- */
- reg32 = inl(pmbase + PM1_CNT);
- if (reg32 & SCI_EN) {
- /* The OS is not an ACPI OS, so we set the state to S0 */
- disable_pm1_control(SLP_EN | SLP_TYP);
- }
-}
-
-/*
- * Look for Synchronous IO SMI and use save state from that
- * core in case we are not running on the same core that
- * initiated the IO transaction.
- */
-static em64t100_smm_state_save_area_t *smi_apmc_find_state_save(uint8_t cmd)
-{
- em64t100_smm_state_save_area_t *state;
- int node;
-
- /* Check all nodes looking for the one that issued the IO */
- for (node = 0; node < CONFIG_MAX_CPUS; node++) {
- state = smm_get_save_state(node);
-
- /* Check for Synchronous IO (bit0==1) */
- if (!(state->io_misc_info & (1 << 0)))
- continue;
-
- /* Make sure it was a write (bit4==0) */
- if (state->io_misc_info & (1 << 4))
- continue;
-
- /* Check for APMC IO port */
- if (((state->io_misc_info >> 16) & 0xff) != APM_CNT)
- continue;
-
- /* Check AX against the requested command */
- if ((state->rax & 0xff) != cmd)
- continue;
-
- return state;
- }
-
- return NULL;
-}
-
-static void southbridge_smi_gsmi(void)
-{
- u32 *ret, *param;
- uint8_t sub_command;
- em64t100_smm_state_save_area_t *io_smi =
- smi_apmc_find_state_save(APM_CNT_ELOG_GSMI);
-
- if (!io_smi)
- return;
-
- /* Command and return value in EAX */
- ret = (u32*)&io_smi->rax;
- sub_command = (uint8_t)(*ret >> 8);
-
- /* Parameter buffer in EBX */
- param = (u32*)&io_smi->rbx;
-
- /* drivers/elog/gsmi.c */
- *ret = gsmi_exec(sub_command, param);
-}
-
-static void southbridge_smi_apmc(void)
-{
- uint8_t reg8;
- em64t100_smm_state_save_area_t *state;
-
- /* Emulate B2 register as the FADT / Linux expects it */
-
- reg8 = inb(APM_CNT);
- switch (reg8) {
- case APM_CNT_CST_CONTROL:
- /* Calling this function seems to cause
- * some kind of race condition in Linux
- * and causes a kernel oops
- */
- printk(BIOS_DEBUG, "C-state control\n");
- break;
- case APM_CNT_PST_CONTROL:
- /* Calling this function seems to cause
- * some kind of race condition in Linux
- * and causes a kernel oops
- */
- printk(BIOS_DEBUG, "P-state control\n");
- break;
- case APM_CNT_ACPI_DISABLE:
- disable_pm1_control(SCI_EN);
- printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
- break;
- case APM_CNT_ACPI_ENABLE:
- enable_pm1_control(SCI_EN);
- printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
- break;
- case APM_CNT_GNVS_UPDATE:
- if (smm_initialized) {
- printk(BIOS_DEBUG,
- "SMI#: SMM structures already initialized!\n");
- return;
- }
- state = smi_apmc_find_state_save(reg8);
- if (state) {
- /* EBX in the state save contains the GNVS pointer */
- gnvs = (global_nvs_t *)((uint32_t)state->rbx);
- smm_initialized = 1;
- printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs);
- }
- break;
- case APM_CNT_ELOG_GSMI:
- if (CONFIG(ELOG_GSMI))
- southbridge_smi_gsmi();
- break;
- }
-
- mainboard_smi_apmc(reg8);
-}
-
-static void southbridge_smi_pm1(void)
-{
- uint16_t pm1_sts = clear_pm1_status();
-
- /* While OSPM is not active, poweroff immediately
- * on a power button event.
- */
- if (pm1_sts & PWRBTN_STS) {
- // power button pressed
- elog_gsmi_add_event(ELOG_TYPE_POWER_BUTTON);
- disable_pm1_control(-1UL);
- enable_pm1_control(SLP_EN | (SLP_TYP_S5 << SLP_TYP_SHIFT));
- }
-}
-
-static void southbridge_smi_gpe0(void)
-{
- clear_gpe_status();
-}
-
-static void southbridge_smi_tco(void)
-{
- uint32_t tco_sts = clear_tco_status();
-
- /* Any TCO event? */
- if (!tco_sts)
- return;
-
- if (tco_sts & TCO_TIMEOUT) { /* TIMEOUT */
- /* Handle TCO timeout */
- printk(BIOS_DEBUG, "TCO Timeout.\n");
- }
-}
-
-static void southbridge_smi_periodic(void)
-{
- uint32_t reg32;
-
- reg32 = inl(get_pmbase() + SMI_EN);
-
- /* Are periodic SMIs enabled? */
- if ((reg32 & PERIODIC_EN) == 0)
- return;
-
- printk(BIOS_DEBUG, "Periodic SMI.\n");
-}
-
-typedef void (*smi_handler_t)(void);
-
-static const smi_handler_t southbridge_smi[32] = {
- NULL, // [0] reserved
- NULL, // [1] reserved
- NULL, // [2] BIOS_STS
- NULL, // [3] LEGACY_USB_STS
- southbridge_smi_sleep, // [4] SLP_SMI_STS
- southbridge_smi_apmc, // [5] APM_STS
- NULL, // [6] SWSMI_TMR_STS
- NULL, // [7] reserved
- southbridge_smi_pm1, // [8] PM1_STS
- southbridge_smi_gpe0, // [9] GPE0_STS
- NULL, // [10] reserved
- NULL, // [11] reserved
- NULL, // [12] reserved
- southbridge_smi_tco, // [13] TCO_STS
- southbridge_smi_periodic, // [14] PERIODIC_STS
- NULL, // [15] SERIRQ_SMI_STS
- NULL, // [16] SMBUS_SMI_STS
- NULL, // [17] LEGACY_USB2_STS
- NULL, // [18] INTEL_USB2_STS
- NULL, // [19] reserved
- NULL, // [20] PCI_EXP_SMI_STS
- NULL, // [21] reserved
- NULL, // [22] reserved
- NULL, // [23] reserved
- NULL, // [24] reserved
- NULL, // [25] reserved
- NULL, // [26] SPI_STS
- NULL, // [27] reserved
- NULL, // [28] PUNIT
- NULL, // [29] GUNIT
- NULL, // [30] reserved
- NULL // [31] reserved
-};
-
-void southbridge_smi_handler(void)
-{
- int i;
- uint32_t smi_sts;
-
- /* We need to clear the SMI status registers, or we won't see what's
- * happening in the following calls.
- */
- smi_sts = clear_smi_status();
-
- /* Call SMI sub handler for each of the status bits */
- for (i = 0; i < ARRAY_SIZE(southbridge_smi); i++) {
- if (!(smi_sts & (1 << i)))
- continue;
-
- if (southbridge_smi[i] != NULL) {
- southbridge_smi[i]();
- } else {
- printk(BIOS_DEBUG,
- "SMI_STS[%d] occurred, but no "
- "handler available.\n", i);
- }
- }
-
- /* The GPIO SMI events do not have a status bit in SMI_STS. Therefore,
- * these events need to be cleared and checked unconditionally. */
- mainboard_smi_gpi(clear_alt_status());
-}
diff --git a/src/soc/intel/fsp_baytrail/smm.c b/src/soc/intel/fsp_baytrail/smm.c
deleted file mode 100644
index fbfd094c93..0000000000
--- a/src/soc/intel/fsp_baytrail/smm.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <device/device.h>
-#include <device/pci.h>
-#include <console/console.h>
-#include <arch/io.h>
-#include <device/mmio.h>
-#include <cpu/x86/smm.h>
-#include <cpu/intel/smm_reloc.h>
-#include <bootstate.h>
-#include <soc/gpio.h>
-#include <soc/iomap.h>
-#include <soc/pmc.h>
-
-/* Save the gpio route register. The settings are committed from
- * smm_southbridge_enable_smi(). */
-static uint32_t gpio_route;
-
-void smm_southcluster_save_gpio_route(uint32_t route)
-{
- gpio_route = route;
-}
-
-void smm_southbridge_clear_state(void)
-{
- uint32_t smi_en;
-
- /* Log events from chipset before clearing */
- if (CONFIG(ELOG))
- southcluster_log_state();
-
- printk(BIOS_DEBUG, "Initializing Southbridge SMI...");
- printk(BIOS_SPEW, " pmbase = 0x%04x\n", get_pmbase());
-
- smi_en = inl(get_pmbase() + SMI_EN);
- if (smi_en & APMC_EN) {
- printk(BIOS_INFO, "SMI# handler already enabled?\n");
- return;
- }
-
- /* Dump and clear status registers */
- clear_smi_status();
- clear_pm1_status();
- clear_tco_status();
- clear_gpe_status();
- clear_alt_status();
- clear_pmc_status();
-}
-
-static void smm_southcluster_route_gpios(void)
-{
- u32 *gpio_rout = (u32 *)(PMC_BASE_ADDRESS + GPIO_ROUT);
- const unsigned short alt_gpio_smi = ACPI_BASE_ADDRESS + ALT_GPIO_SMI;
- uint32_t alt_gpio_reg = 0;
- uint32_t route_reg = gpio_route;
- int i;
-
- printk(BIOS_DEBUG, "GPIO_ROUT = %08x\n", route_reg);
-
- /* Start the routing for the specific gpios. */
- write32(gpio_rout, route_reg);
-
- /* Enable SMIs for the gpios that are set to trigger the SMI. */
- for (i = 0; i < 16; i++) {
- if ((route_reg & ROUTE_MASK) == ROUTE_SMI) {
- alt_gpio_reg |= (1 << i);
- }
- route_reg >>= 2;
- }
- printk(BIOS_DEBUG, "ALT_GPIO_SMI = %08x\n", alt_gpio_reg);
-
- outl(alt_gpio_reg, alt_gpio_smi);
-}
-
-void smm_southbridge_enable_smi(void)
-{
-
- printk(BIOS_DEBUG, "Enabling SMIs.\n");
- /* Configure events Disable pcie wake. */
- enable_pm1(PWRBTN_EN | GBL_EN | PCIEXPWAK_DIS);
- disable_gpe(PME_B0_EN);
-
- /* Set up the GPIO route. */
- smm_southcluster_route_gpios();
-
- /* Enable SMI generation:
- * - on APMC writes (io 0xb2)
- * - on writes to SLP_EN (sleep states)
- * - on writes to GBL_RLS (bios commands)
- * No SMIs:
- * - on TCO events
- * - on microcontroller writes (io 0x62/0x66)
- */
- enable_smi(APMC_EN | SLP_SMI_EN | GBL_SMI_EN | EOS);
-}
-
-void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
-{
- /*
- * Issue SMI to set the gnvs pointer in SMM.
- * tcg and smi1 are unused.
- *
- * EAX = APM_CNT_GNVS_UPDATE
- * EBX = gnvs pointer
- * EDX = APM_CNT
- */
- asm volatile (
- "outb %%al, %%dx\n\t"
- : /* ignore result */
- : "a" (APM_CNT_GNVS_UPDATE),
- "b" ((uint32_t)gnvs),
- "d" (APM_CNT)
- );
-}
-
-static void finalize_chipset(void *unused)
-{
- printk(BIOS_DEBUG, "Finalizing SMM.\n");
- /* Lock sleep stretching policy and set SMI lock. */
- write32((void *)(PMC_BASE_ADDRESS + GEN_PMCON2),
- read32((void *)(PMC_BASE_ADDRESS + GEN_PMCON2))
- | SLPSX_STR_POL_LOCK | SMI_LOCK);
- outb(APM_CNT_FINALIZE, APM_CNT);
-}
-
-BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, finalize_chipset, NULL);
-BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, finalize_chipset, NULL);
diff --git a/src/soc/intel/fsp_baytrail/southcluster.c b/src/soc/intel/fsp_baytrail/southcluster.c
deleted file mode 100644
index 59411ec5f8..0000000000
--- a/src/soc/intel/fsp_baytrail/southcluster.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2013 Google Inc.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <arch/io.h>
-#include <device/mmio.h>
-#include <device/pci_ops.h>
-#include <arch/ioapic.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_def.h>
-#include <pc80/i8254.h>
-#include <pc80/i8259.h>
-#include <pc80/isa-dma.h>
-
-#include <soc/baytrail.h>
-#include <soc/iomap.h>
-#include <soc/irq.h>
-#include <soc/lpc.h>
-#include <soc/nvs.h>
-#include <soc/acpi.h>
-#include <soc/pci_devs.h>
-#include <soc/pmc.h>
-#include <soc/ramstage.h>
-#include "chip.h"
-#include <arch/acpi.h>
-
-typedef struct soc_intel_fsp_baytrail_config config_t;
-
-static inline void
-add_mmio_resource(struct device *dev, int i, unsigned long addr, unsigned long size)
-{
- mmio_resource(dev, i, addr >> 10, size >> 10);
-}
-
-static void sc_add_mmio_resources(struct device *dev)
-{
- add_mmio_resource(dev, 0xfeb, ABORT_BASE_ADDRESS, ABORT_BASE_SIZE);
- add_mmio_resource(dev, PBASE, PMC_BASE_ADDRESS, PMC_BASE_SIZE);
- add_mmio_resource(dev, IOBASE, IO_BASE_ADDRESS, IO_BASE_SIZE);
- add_mmio_resource(dev, IBASE, ILB_BASE_ADDRESS, ILB_BASE_SIZE);
- add_mmio_resource(dev, SBASE, SPI_BASE_ADDRESS, SPI_BASE_SIZE);
- add_mmio_resource(dev, MPBASE, MPHY_BASE_ADDRESS, MPHY_BASE_SIZE);
- add_mmio_resource(dev, PUBASE, PUNIT_BASE_ADDRESS, PUNIT_BASE_SIZE);
- add_mmio_resource(dev, RCBA, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE);
- add_mmio_resource(dev, 0xfff, 0xffffffff - CONFIG_VIRTUAL_ROM_SIZE + 1,
- CONFIG_VIRTUAL_ROM_SIZE); /* BIOS ROM */
- add_mmio_resource(dev, 0xfec, IO_APIC_ADDR, 0x00001000); /* IOAPIC */
-}
-
-/* Default IO range claimed by the LPC device. The upper bound is exclusive. */
-#define LPC_DEFAULT_IO_RANGE_LOWER 0
-#define LPC_DEFAULT_IO_RANGE_UPPER 0x1000
-
-static void sc_enable_ioapic(struct device *dev)
-{
- int i;
- u32 reg32;
- volatile u32 *ioapic_index = (u32 *)(IO_APIC_ADDR);
- volatile u32 *ioapic_data = (u32 *)(IO_APIC_ADDR + 0x10);
- u8 *ilb_base = (u8 *)(pci_read_config32(dev, IBASE) & ~0x0f);
-
- /*
- * Enable ACPI I/O and power management.
- * Set SCI IRQ to IRQ9
- */
- write32(ilb_base + ILB_OIC, 0x100); /* AEN */
- reg32 = read32(ilb_base + ILB_OIC); /* Read back per BWG */
- write32(ilb_base + ILB_ACTL, 0); /* ACTL bit 2:0 SCIS IRQ9 */
-
- *ioapic_index = 0;
- *ioapic_data = (1 << 25);
-
- /* affirm full set of redirection table entries ("write once") */
- *ioapic_index = 1;
- reg32 = *ioapic_data;
- *ioapic_index = 1;
- *ioapic_data = reg32;
-
- *ioapic_index = 0;
- reg32 = *ioapic_data;
- printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
- if (reg32 != (1 << 25))
- die_with_post_code(POST_HW_INIT_FAILURE, "APIC Error\n");
-
- printk(BIOS_SPEW, "Dumping IOAPIC registers\n");
- for (i=0; i<3; i++) {
- *ioapic_index = i;
- printk(BIOS_SPEW, " reg 0x%04x:", i);
- reg32 = *ioapic_data;
- printk(BIOS_SPEW, " 0x%08x\n", reg32);
- }
-
- *ioapic_index = 3; /* Select Boot Configuration register. */
- *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
-}
-
-static void sc_enable_serial_irqs(struct device *dev)
-{
-#ifdef SETUPSERIQ /* NOT defined. Remove when the TODO is done. */
- /*
- * TODO: SERIRQ seems to have a number of problems on baytrail.
- * With it enabled, we get some spurious interrupts (ps2)
- * in seabios. It also caused IOCHK# NMIs. Remove it
- * until we understand how it needs to be configured.
- */
- u8 reg8;
- u8 *ibase = (u8 *)(pci_read_config32(dev, IBASE) & ~0xF);
-
- /*
- * Disable the IOCHK# NMI. Let the NMI handler enable it if it needs.
- */
- reg8 = inb(0x61);
- reg8 &= 0x0f; /* Higher Nibble must be 0 */
- reg8 |= (1 << 3); /* IOCHK# NMI Disable for now */
- outb(reg8, 0x61);
-
- write32(ibase + ILB_OIC, read32(ibase + ILB_OIC) | SIRQEN);
- write8(ibase + ILB_SERIRQ_CNTL, SCNT_CONTINUOUS_MODE);
-
-#if !CONFIG(SERIRQ_CONTINUOUS_MODE)
- /*
- * SoC requires that the System BIOS first set the SERIRQ logic to
- * continuous mode operation for at least one frame before switching
- * it into quiet mode operation.
- */
- outb(0x00, 0xED); /* I/O Delay to get the 1 frame */
- write8(ibase + ILB_SERIRQ_CNTL, SCNT_QUIET_MODE);
-#endif
-#endif /* DON'T SET UP IRQS */
-}
-
-/*
- * Write PCI config space IRQ assignments. PCI devices have the INT_LINE
- * (0x3C) and INT_PIN (0x3D) registers which report interrupt routing
- * information to operating systems and drivers. The INT_PIN register is
- * generally read only and reports which interrupt pin A - D it uses. The
- * INT_LINE register is configurable and reports which IRQ (generally the
- * PIC IRQs 1 - 15) it will use. This needs to take interrupt pin swizzling
- * on devices that are downstream on a PCI bridge into account.
- *
- * This function will loop through all enabled PCI devices and program the
- * INT_LINE register with the correct PIC IRQ number for the INT_PIN that it
- * uses. It then configures each interrupt in the pic to be level triggered.
- */
-static void write_pci_config_irqs(void)
-{
- struct device *irq_dev;
- struct device *targ_dev;
- uint8_t int_line = 0;
- uint8_t original_int_pin = 0;
- uint8_t new_int_pin = 0;
- uint16_t current_bdf = 0;
- uint16_t parent_bdf = 0;
- uint8_t pirq = 0;
- uint8_t device_num = 0;
- const struct baytrail_irq_route *ir = &global_baytrail_irq_route;
-
- if (ir == NULL) {
- printk(BIOS_WARNING, "Warning: Can't write PCI IRQ assignments because"
- " 'global_baytrail_irq_route' structure does not exist\n");
- return;
- }
-
- /*
- * Loop through all enabled devices and program their
- * INT_LINE, INT_PIN registers from values taken from
- * the Interrupt Route registers in the ILB
- */
- printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ assignments\n");
- for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
-
- if ((irq_dev->path.type != DEVICE_PATH_PCI) ||
- (!irq_dev->enabled))
- continue;
-
- current_bdf = irq_dev->path.pci.devfn |
- irq_dev->bus->secondary << 8;
-
- /*
- * Step 1: Get the INT_PIN and device structure to look for
- * in the pirq_data table defined in the mainboard directory.
- */
- targ_dev = NULL;
- new_int_pin = get_pci_irq_pins(irq_dev, &targ_dev);
- if (targ_dev == NULL || new_int_pin < 1)
- continue;
-
- /*
- * Adjust the INT routing for the PCIe root ports
- * See 'Interrupt Generated for INT[A-D] Interrupts'
- * Table 241 in Document Number: 538136, Rev. 3.9
- */
- if (PCI_SLOT(targ_dev->path.pci.devfn) == PCIE_DEV &&
- targ_dev != irq_dev)
- new_int_pin = ((new_int_pin - 1 +
- PCI_FUNC(targ_dev->path.pci.devfn)) % 4) + 1;
-
- /* Get the original INT_PIN for record keeping */
- original_int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
-
- parent_bdf = targ_dev->path.pci.devfn
- | targ_dev->bus->secondary << 8;
- device_num = PCI_SLOT(parent_bdf);
-
- if (ir->pcidev[device_num] == 0) {
- printk(BIOS_WARNING,
- "Warning: PCI Device %d does not have an IRQ entry, skipping it\n",
- device_num);
- continue;
- }
-
- /* Find the PIRQ that is attached to the INT_PIN this device uses */
- pirq = (ir->pcidev[device_num] >> ((new_int_pin - 1) * 4)) & 0xF;
-
- /* Get the INT_LINE this device/function will use */
- int_line = ir->pic[pirq];
-
- if (int_line != PIRQ_PIC_IRQDISABLE) {
- /* Set this IRQ to level triggered since it is used by a PCI device */
- i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED);
- /* Set the Interrupt Line register in PCI config space */
- pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
- } else {
- /* Set the Interrupt line register as "unknown or unused" */
- pci_write_config8(irq_dev, PCI_INTERRUPT_LINE,
- PIRQ_PIC_UNKNOWN_UNUSED);
- }
-
- printk(BIOS_SPEW, "\tINT_PIN\t\t: %d (%s)\n",
- original_int_pin, pin_to_str(original_int_pin));
- if (parent_bdf != current_bdf)
- printk(BIOS_SPEW, "\tSwizzled to\t: %d (%s)\n",
- new_int_pin, pin_to_str(new_int_pin));
- printk(BIOS_SPEW, "\tPIRQ\t\t: %c\n"
- "\tINT_LINE\t: 0x%X (IRQ %d)\n",
- 'A' + pirq, int_line, int_line);
- }
- printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n");
-}
-
-static void sc_pirq_init(struct device *dev)
-{
- int i, j;
- int pirq;
- u8 *pr_base = (u8 *)(ILB_BASE_ADDRESS + 0x08);
- u16 *ir_base = (u16 *)(ILB_BASE_ADDRESS + 0x20);
- u32 *actl = (u32 *)(ILB_BASE_ADDRESS + ACTL);
- const struct baytrail_irq_route *ir = &global_baytrail_irq_route;
-
- /* Set up the PIRQ PIC routing based on static config. */
- printk(BIOS_SPEW, "Start writing IRQ assignments\n"
- "PIRQ\tA\tB\tC\tD\tE\tF\tG\tH\n"
- "IRQ ");
- for (i = 0; i < NUM_PIRQS; i++) {
- write8(pr_base + i, ir->pic[i]);
- printk(BIOS_SPEW, "\t%d", ir->pic[i]);
- }
- printk(BIOS_SPEW, "\n\n");
-
- /* Set up the per device PIRQ routing based on static config. */
- printk(BIOS_SPEW, "\t\t\tPIRQ[A-H] routed to each INT_PIN[A-D]\n"
- "Dev\tINTA (IRQ)\tINTB (IRQ)\tINTC (IRQ)\tINTD (IRQ)\n");
- for (i = 0; i < NUM_OF_PCI_DEVS; i++) {
- write16(ir_base + i, ir->pcidev[i]);
-
- /* If the entry is more than just 0, print it out */
- if (ir->pcidev[i]) {
- printk(BIOS_SPEW, " %d: ", i);
- for (j = 0; j < 4; j++) {
- pirq = (ir->pcidev[i] >> (j * 4)) & 0xF;
- printk(BIOS_SPEW, "\t%-4c (%d)", 'A' + pirq, ir->pic[pirq]);
- }
- printk(BIOS_SPEW, "\n");
- }
- }
-
- /* Route SCI to IRQ9 */
- write32(actl, (read32(actl) & ~SCIS_MASK) | SCIS_IRQ9);
- printk(BIOS_SPEW, "Finished writing IRQ assignments\n");
-
- /* Write IRQ assignments to PCI config space */
- write_pci_config_irqs();
-}
-
-static inline int io_range_in_default(int base, int size)
-{
- /* Does it start above the range? */
- if (base >= LPC_DEFAULT_IO_RANGE_UPPER)
- return 0;
-
- /* Is it entirely contained? */
- if (base >= LPC_DEFAULT_IO_RANGE_LOWER &&
- (base + size) < LPC_DEFAULT_IO_RANGE_UPPER)
- return 1;
-
- /* This will return not in range for partial overlaps. */
- return 0;
-}
-
-/*
- * Note: this function assumes there is no overlap with the default LPC device's
- * claimed range: LPC_DEFAULT_IO_RANGE_LOWER -> LPC_DEFAULT_IO_RANGE_UPPER.
- */
-static void sc_add_io_resource(struct device *dev, int base, int size, int index)
-{
- struct resource *res;
-
- if (io_range_in_default(base, size))
- return;
-
- res = new_resource(dev, index);
- res->base = base;
- res->size = size;
- res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED |
- IORESOURCE_FIXED;
-}
-
-static void sc_add_io_resources(struct device *dev)
-{
- struct resource *res;
- u8 io_index = 0;
-
- /*
- * Add the default claimed IO range for the LPC device
- * and mark it as subtractive decode.
- */
- res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
- res->base = LPC_DEFAULT_IO_RANGE_LOWER;
- res->size = LPC_DEFAULT_IO_RANGE_UPPER - LPC_DEFAULT_IO_RANGE_LOWER;
- res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
- IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-
- /* GPIO */
- sc_add_io_resource(dev, GPIO_BASE_ADDRESS, GPIO_BASE_SIZE, GBASE);
-
- /* ACPI */
- sc_add_io_resource(dev, ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, ABASE);
-}
-
-static void sc_read_resources(struct device *dev)
-{
- /* Get the normal PCI resources of this device. */
- pci_dev_read_resources(dev);
-
- /* Add non-standard MMIO resources. */
- sc_add_mmio_resources(dev);
-
- /* Add IO resources. */
- sc_add_io_resources(dev);
-}
-
-static void enable_hpet(void)
-{
-}
-
-static void sc_init(struct device *dev)
-{
- u8 *ibase;
-
- printk(BIOS_DEBUG, "soc: southcluster_init\n");
-
- ibase = (u8 *)(pci_read_config32(dev, IBASE) & ~0xF);
-
- write8(ibase + ILB_MC, 0);
-
- /* Set the value for PCI command register. */
- pci_write_config16(dev, PCI_COMMAND,
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
-
- /* IO APIC initialization. */
- sc_enable_ioapic(dev);
-
- sc_enable_serial_irqs(dev);
-
- /* Setup the PIRQ. */
- sc_pirq_init(dev);
-
- /* Initialize the High Precision Event Timers, if present. */
- enable_hpet();
-
- /* Initialize ISA DMA. */
- isa_dma_init();
-
- setup_i8259();
-
- setup_i8254();
-}
-
-/*
- * Common code for the south cluster devices.
- */
-
-/* Set bit in function disable register to hide this device. */
-static void sc_disable_devfn(struct device *dev)
-{
- u32 *func_dis = (u32 *)(PMC_BASE_ADDRESS + FUNC_DIS);
- u32 *func_dis2 = (u32 *)(PMC_BASE_ADDRESS + FUNC_DIS2);
- uint32_t fd_mask = 0;
- uint32_t fd2_mask = 0;
-
-#define SET_DIS_MASK(name_) \
- case PCI_DEVFN(name_ ## _DEV, name_ ## _FUNC): \
- fd_mask |= name_ ## _DIS
-#define SET_DIS_MASK2(name_) \
- case PCI_DEVFN(name_ ## _DEV, name_ ## _FUNC): \
- fd2_mask |= name_ ## _DIS
-
- switch (dev->path.pci.devfn) {
- SET_DIS_MASK(LPE);
- break;
- SET_DIS_MASK(TXE);
- break;
- SET_DIS_MASK(PCIE_PORT1);
- break;
- SET_DIS_MASK(PCIE_PORT2);
- break;
- SET_DIS_MASK(PCIE_PORT3);
- break;
- SET_DIS_MASK(PCIE_PORT4);
- break;
- SET_DIS_MASK2(SMBUS);
- break;
- SET_DIS_MASK(OTG);
- /* Disable OTG PHY when OTG is not available. */
- fd2_mask |= OTG_SS_PHY_DIS;
- break;
- }
-
- if (fd_mask != 0) {
- write32(func_dis, read32(func_dis) | fd_mask);
- /* Ensure posted write hits. */
- read32(func_dis);
- }
-
- if (fd2_mask != 0) {
- write32(func_dis2, read32(func_dis2) | fd2_mask);
- /* Ensure posted write hits. */
- read32(func_dis2);
- }
-}
-
-static inline void set_d3hot_bits(struct device *dev, int offset)
-{
- uint32_t reg8;
- printk(BIOS_DEBUG, "Power management CAP offset 0x%x.\n", offset);
- reg8 = pci_read_config8(dev, offset + 4);
- reg8 |= 0x3;
- pci_write_config8(dev, offset + 4, reg8);
-}
-
-/* Parts of the audio subsystem are powered by the HDA device. Therefore, one
- * cannot put HDA into D3Hot. Instead perform this workaround to make some of
- * the audio paths work for LPE audio. */
-static void hda_work_around(struct device *dev)
-{
- u32 *gctl = (u32 *)(TEMP_BASE_ADDRESS + 0x8);
-
- /* Need to set magic register 0x43 to 0xd7 in config space. */
- pci_write_config8(dev, 0x43, 0xd7);
-
- /* Need to set bit 0 of GCTL to take the device out of reset. However,
- * that requires setting up the 64-bit BAR. */
- pci_write_config32(dev, PCI_BASE_ADDRESS_0, TEMP_BASE_ADDRESS);
- pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0);
- pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY);
- write32(gctl, read32(gctl) | 0x1);
- pci_write_config8(dev, PCI_COMMAND, 0);
- pci_write_config32(dev, PCI_BASE_ADDRESS_0, 0);
-}
-
-static int place_device_in_d3hot(struct device *dev)
-{
- unsigned int offset;
-
- /* Parts of the HDA block are used for LPE audio as well.
- * Therefore assume the HDA will never be put into D3Hot. */
- if (dev->path.pci.devfn == PCI_DEVFN(HDA_DEV, HDA_FUNC)) {
- hda_work_around(dev);
- return 0;
- }
-
- offset = pci_find_capability(dev, PCI_CAP_ID_PM);
-
- if (offset != 0) {
- set_d3hot_bits(dev, offset);
- return 0;
- }
-
- /* For some reason some of the devices don't have the capability
- * pointer set correctly. Work around this by hard coding the offset. */
-#define DEV_CASE(name_) \
- case PCI_DEVFN(name_ ## _DEV, name_ ## _FUNC)
-
- switch (dev->path.pci.devfn) {
- DEV_CASE(MIPI):
- DEV_CASE(SDIO):
- DEV_CASE(EMMC):
- DEV_CASE(SD):
- DEV_CASE(MMC45):
- DEV_CASE(LPE):
- DEV_CASE(SIO_DMA1):
- DEV_CASE(I2C1):
- DEV_CASE(I2C2):
- DEV_CASE(I2C3):
- DEV_CASE(I2C4):
- DEV_CASE(I2C5):
- DEV_CASE(I2C6):
- DEV_CASE(I2C7):
- DEV_CASE(SIO_DMA2):
- DEV_CASE(PWM1):
- DEV_CASE(PWM2):
- DEV_CASE(HSUART1):
- DEV_CASE(HSUART2):
- DEV_CASE(SPI):
- DEV_CASE(OTG):
- offset = 0x80;
- break;
- DEV_CASE(SATA):
- DEV_CASE(XHCI):
- DEV_CASE(EHCI):
- offset = 0x70;
- break;
- DEV_CASE(HDA):
- DEV_CASE(SMBUS):
- offset = 0x50;
- break;
- DEV_CASE(TXE):
- /* TXE cannot be placed in D3Hot. */
- return 0;
- break;
- DEV_CASE(PCIE_PORT1):
- DEV_CASE(PCIE_PORT2):
- DEV_CASE(PCIE_PORT3):
- DEV_CASE(PCIE_PORT4):
- offset = 0xa0;
- break;
- }
-
- if (offset != 0) {
- set_d3hot_bits(dev, offset);
- return 0;
- }
-
- return -1;
-}
-
-/* Common PCI device function disable. */
-void southcluster_enable_dev(struct device *dev)
-{
- uint32_t reg32;
-
- if (!dev->enabled) {
- int slot = PCI_SLOT(dev->path.pci.devfn);
- int func = PCI_FUNC(dev->path.pci.devfn);
- printk(BIOS_DEBUG, "%s: Disabling device: %02x.%01x\n",
- dev_path(dev), slot, func);
-
- /* Ensure memory, io, and bus master are all disabled */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 &= ~(PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
- pci_write_config32(dev, PCI_COMMAND, reg32);
-
- /* Place device in D3Hot */
- if (place_device_in_d3hot(dev) < 0) {
- printk(BIOS_WARNING,
- "Could not place %02x.%01x into D3Hot. "
- "Keeping device visible.\n", slot, func);
- return;
- }
- /* Disable this device if possible */
- sc_disable_devfn(dev);
- } else {
- /* Enable SERR */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 |= PCI_COMMAND_SERR;
- pci_write_config32(dev, PCI_COMMAND, reg32);
- }
-}
-
-static struct device_operations device_ops = {
- .read_resources = sc_read_resources,
- .set_resources = pci_dev_set_resources,
- .acpi_inject_dsdt_generator = southcluster_inject_dsdt,
- .write_acpi_tables = southcluster_write_acpi_tables,
- .enable_resources = NULL,
- .init = sc_init,
- .enable = southcluster_enable_dev,
- .scan_bus = scan_static_bus,
- .ops_pci = &soc_pci_ops,
-};
-
-static const struct pci_driver southcluster __pci_driver = {
- .ops = &device_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = LPC_DEVID,
-};
diff --git a/src/soc/intel/fsp_baytrail/spi.c b/src/soc/intel/fsp_baytrail/spi.c
deleted file mode 100644
index 8aa6290386..0000000000
--- a/src/soc/intel/fsp_baytrail/spi.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
- * Copyright (C) 2016 Siemens AG
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* This file is derived from the flashrom project. */
-#include <arch/early_variables.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <commonlib/helpers.h>
-#include <delay.h>
-#include <device/mmio.h>
-#include <device/pci_ops.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <spi_flash.h>
-#include <spi-generic.h>
-
-#include <soc/lpc.h>
-#include <soc/pci_devs.h>
-
-typedef struct spi_slave ich_spi_slave;
-
-static int g_ichspi_lock CAR_GLOBAL = 0;
-
-typedef struct ich9_spi_regs {
- uint32_t bfpr;
- uint16_t hsfs;
- uint16_t hsfc;
- uint32_t faddr;
- uint32_t _reserved0;
- uint32_t fdata[16];
- uint32_t frap;
- uint32_t freg[5];
- uint32_t _reserved1[3];
- uint32_t pr[5];
- uint32_t _reserved2[2];
- uint8_t ssfs;
- uint8_t ssfc[3];
- uint16_t preop;
- uint16_t optype;
- uint8_t opmenu[8];
- uint8_t _reserved3[16];
- uint32_t fdoc;
- uint32_t fdod;
- uint8_t _reserved4[8];
- uint32_t afc;
- uint32_t lvscc;
- uint32_t uvscc;
- uint8_t _reserved5[4];
- uint32_t fpb;
- uint8_t _reserved6[28];
- uint32_t srdl;
- uint32_t srdc;
- uint32_t srd;
-} __packed ich9_spi_regs;
-
-typedef struct ich_spi_controller {
- int locked;
-
- uint8_t *opmenu;
- int menubytes;
- uint16_t *preop;
- uint16_t *optype;
- uint32_t *addr;
- uint8_t *data;
- unsigned int databytes;
- uint8_t *status;
- uint16_t *control;
-} ich_spi_controller;
-
-static ich_spi_controller g_cntlr CAR_GLOBAL;
-
-enum {
- SPIS_SCIP = 0x0001,
- SPIS_GRANT = 0x0002,
- SPIS_CDS = 0x0004,
- SPIS_FCERR = 0x0008,
- SSFS_AEL = 0x0010,
- SPIS_LOCK = 0x8000,
- SPIS_RESERVED_MASK = 0x7ff0,
- SSFS_RESERVED_MASK = 0x7fe2
-};
-
-enum {
- SPIC_SCGO = 0x000002,
- SPIC_ACS = 0x000004,
- SPIC_SPOP = 0x000008,
- SPIC_DBC = 0x003f00,
- SPIC_DS = 0x004000,
- SPIC_SME = 0x008000,
- SSFC_SCF_MASK = 0x070000,
- SSFC_RESERVED = 0xf80000
-};
-
-enum {
- HSFS_FDONE = 0x0001,
- HSFS_FCERR = 0x0002,
- HSFS_AEL = 0x0004,
- HSFS_BERASE_MASK = 0x0018,
- HSFS_BERASE_SHIFT = 3,
- HSFS_SCIP = 0x0020,
- HSFS_FDOPSS = 0x2000,
- HSFS_FDV = 0x4000,
- HSFS_FLOCKDN = 0x8000
-};
-
-enum {
- HSFC_FGO = 0x0001,
- HSFC_FCYCLE_MASK = 0x0006,
- HSFC_FCYCLE_SHIFT = 1,
- HSFC_FDBC_MASK = 0x3f00,
- HSFC_FDBC_SHIFT = 8,
- HSFC_FSMIE = 0x8000
-};
-
-enum {
- SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0,
- SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1,
- SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2,
- SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3
-};
-
-#define SPI_OFFSET_MASK 0x3ff
-
-static uint8_t readb_(const void *addr)
-{
- uint8_t v = read8(addr);
- if (CONFIG(DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: read %2.2x from %4.4x\n",
- v, (((uint32_t) addr) & SPI_OFFSET_MASK));
- }
- return v;
-}
-
-static uint16_t readw_(const void *addr)
-{
- uint16_t v = read16(addr);
- if (CONFIG(DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: read %4.4x from %4.4x\n",
- v, (((uint32_t) addr) & SPI_OFFSET_MASK));
- }
- return v;
-}
-
-static uint32_t readl_(const void *addr)
-{
- uint32_t v = read32(addr);
- if (CONFIG(DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: read %8.8x from %4.4x\n",
- v, (((uint32_t) addr) & SPI_OFFSET_MASK));
- }
- return v;
-}
-
-static void writeb_(uint8_t b, void *addr)
-{
- write8(addr, b);
- if (CONFIG(DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: wrote %2.2x to %4.4x\n",
- b, (((uint32_t) addr) & SPI_OFFSET_MASK));
- }
-}
-
-static void writew_(uint16_t b, void *addr)
-{
- write16(addr, b);
- if (CONFIG(DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: wrote %4.4x to %4.4x\n",
- b, (((uint32_t) addr) & SPI_OFFSET_MASK));
- }
-}
-
-static void writel_(uint32_t b, void *addr)
-{
- write32(addr, b);
- if (CONFIG(DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: wrote %8.8x to %4.4x\n",
- b, (((uint32_t) addr) & SPI_OFFSET_MASK));
- }
-}
-
-static void write_reg(const void *value, void *dest, uint32_t size)
-{
- const uint8_t *bvalue = value;
- uint8_t *bdest = dest;
-
- while (size >= 4) {
- writel_(*(const uint32_t *)bvalue, bdest);
- bdest += 4; bvalue += 4; size -= 4;
- }
- while (size) {
- writeb_(*bvalue, bdest);
- bdest++; bvalue++; size--;
- }
-}
-
-static void read_reg(const void *src, void *value, uint32_t size)
-{
- const uint8_t *bsrc = src;
- uint8_t *bvalue = value;
-
- while (size >= 4) {
- *(uint32_t *)bvalue = readl_(bsrc);
- bsrc += 4; bvalue += 4; size -= 4;
- }
- while (size) {
- *bvalue = readb_(bsrc);
- bsrc++; bvalue++; size--;
- }
-}
-
-static ich9_spi_regs *spi_regs(void)
-{
- uint32_t sbase;
-
-#ifdef __SIMPLE_DEVICE__
- pci_devfn_t dev = PCI_DEV(0, LPC_DEV, LPC_FUNC);
-#else
- struct device *dev = pcidev_on_root(LPC_DEV, LPC_FUNC);
-#endif
- sbase = pci_read_config32(dev, SBASE);
- sbase &= ~0x1ff;
-
- return (void *)sbase;
-}
-
-#define MENU_BYTES member_size(struct ich9_spi_regs, opmenu)
-
-void spi_init(void)
-{
- ich_spi_controller *cntlr = car_get_var_ptr(&g_cntlr);
- ich9_spi_regs *ich9_spi = spi_regs();
-
- car_set_var(g_ichspi_lock, readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN);
- cntlr->opmenu = ich9_spi->opmenu;
- cntlr->menubytes = sizeof(ich9_spi->opmenu);
- cntlr->optype = &ich9_spi->optype;
- cntlr->addr = &ich9_spi->faddr;
- cntlr->data = (uint8_t *)ich9_spi->fdata;
- cntlr->databytes = sizeof(ich9_spi->fdata);
- cntlr->status = &ich9_spi->ssfs;
- cntlr->control = (uint16_t *)ich9_spi->ssfc;
- cntlr->preop = &ich9_spi->preop;
-}
-
-typedef struct spi_transaction {
- const uint8_t *out;
- uint32_t bytesout;
- uint8_t *in;
- uint32_t bytesin;
- uint8_t type;
- uint8_t opcode;
- uint32_t offset;
-} spi_transaction;
-
-static inline void spi_use_out(spi_transaction *trans, unsigned int bytes)
-{
- trans->out += bytes;
- trans->bytesout -= bytes;
-}
-
-static inline void spi_use_in(spi_transaction *trans, unsigned int bytes)
-{
- trans->in += bytes;
- trans->bytesin -= bytes;
-}
-
-static void spi_setup_type(spi_transaction *trans)
-{
- trans->type = 0xFF;
-
- /* Try to guess spi type from read/write sizes. */
- if (trans->bytesin == 0) {
- if (trans->bytesout > 4)
- /*
- * If bytesin = 0 and bytesout > 4, we presume this is
- * a write data operation, which is accompanied by an
- * address.
- */
- trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS;
- else
- trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS;
- return;
- }
-
- if (trans->bytesout == 1) { /* and bytesin is > 0 */
- trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS;
- return;
- }
-
- if (trans->bytesout == 4) { /* and bytesin is > 0 */
- trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
- }
-
- /* Fast read command is called with 5 bytes instead of 4 */
- if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) {
- trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
- --trans->bytesout;
- }
-}
-
-static int spi_setup_opcode(spi_transaction *trans)
-{
- ich_spi_controller *cntlr = car_get_var_ptr(&g_cntlr);
- uint16_t optypes;
- uint8_t opmenu[MENU_BYTES];
-
- trans->opcode = trans->out[0];
- spi_use_out(trans, 1);
- if (!car_get_var(g_ichspi_lock)) {
- /* The lock is off, so just use index 0. */
- writeb_(trans->opcode, cntlr->opmenu);
- optypes = readw_(cntlr->optype);
- optypes = (optypes & 0xfffc) | (trans->type & 0x3);
- writew_(optypes, cntlr->optype);
- return 0;
- } else {
- /* The lock is on. See if what we need is on the menu. */
- uint8_t optype;
- uint16_t opcode_index;
-
- /* Write Enable is handled as atomic prefix */
- if (trans->opcode == SPI_OPCODE_WREN)
- return 0;
-
- read_reg(cntlr->opmenu, opmenu, sizeof(opmenu));
- for (opcode_index = 0; opcode_index < ARRAY_SIZE(opmenu); opcode_index++) {
- if (opmenu[opcode_index] == trans->opcode)
- break;
- }
-
- if (opcode_index == ARRAY_SIZE(opmenu)) {
- printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
- trans->opcode);
- return -1;
- }
-
- optypes = readw_(cntlr->optype);
- optype = (optypes >> (opcode_index * 2)) & 0x3;
- if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
- optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
- trans->bytesout >= 3) {
- /* We guessed wrong earlier. Fix it up. */
- trans->type = optype;
- }
- if (optype != trans->type) {
- printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
- optype);
- return -1;
- }
- return opcode_index;
- }
-}
-
-static int spi_setup_offset(spi_transaction *trans)
-{
- /* Separate the SPI address and data. */
- switch (trans->type) {
- case SPI_OPCODE_TYPE_READ_NO_ADDRESS:
- case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS:
- return 0;
- case SPI_OPCODE_TYPE_READ_WITH_ADDRESS:
- case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS:
- trans->offset = ((uint32_t)trans->out[0] << 16) |
- ((uint32_t)trans->out[1] << 8) |
- ((uint32_t)trans->out[2] << 0);
- spi_use_out(trans, 3);
- return 1;
- default:
- printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type);
- return -1;
- }
-}
-
-/*
- * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set
- * below is True) or 0. In case the wait was for the bit(s) to set - write
- * those bits back, which would cause resetting them.
- *
- * Return the last read status value on success or -1 on failure.
- */
-static int ich_status_poll(uint16_t bitmask, int wait_til_set)
-{
- ich_spi_controller *cntlr = car_get_var_ptr(&g_cntlr);
- int timeout = 40000; /* This will result in 400 ms */
- uint16_t status = 0;
-
- while (timeout--) {
- status = readw_(cntlr->status);
- if (wait_til_set ^ ((status & bitmask) == 0)) {
- if (wait_til_set)
- writew_((status & bitmask), cntlr->status);
- return status;
- }
- udelay(10);
- }
-
- printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n",
- status, bitmask);
- return -1;
-}
-
-static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
- size_t bytesout, void *din, size_t bytesin)
-{
- ich_spi_controller *cntlr = car_get_var_ptr(&g_cntlr);
- uint16_t control;
- int16_t opcode_index;
- int with_address;
- int status;
-
- spi_transaction trans = {
- dout, bytesout,
- din, bytesin,
- 0xff, 0xff, 0
- };
-
- /* There has to always at least be an opcode. */
- if (!bytesout || !dout) {
- printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n");
- return -1;
- }
- /* Make sure if we read something we have a place to put it. */
- if (bytesin != 0 && !din) {
- printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n");
- return -1;
- }
-
- if (ich_status_poll(SPIS_SCIP, 0) == -1)
- return -1;
-
- writew_(SPIS_CDS | SPIS_FCERR, cntlr->status);
-
- spi_setup_type(&trans);
- if ((opcode_index = spi_setup_opcode(&trans)) < 0)
- return -1;
- if ((with_address = spi_setup_offset(&trans)) < 0)
- return -1;
-
- if (!car_get_var(g_ichspi_lock) && trans.opcode == SPI_OPCODE_WREN) {
- /*
- * Treat Write Enable as Atomic Pre-Op if possible
- * in order to prevent the Management Engine from
- * issuing a transaction between WREN and DATA.
- */
- writew_(trans.opcode, cntlr->preop);
- return 0;
- }
-
- /* Preset control fields */
- control = SPIC_SCGO | ((opcode_index & 0x07) << 4);
-
- /* Issue atomic preop cycle if needed */
- if (readw_(cntlr->preop))
- control |= SPIC_ACS;
-
- if (!trans.bytesout && !trans.bytesin) {
- /* SPI addresses are 24 bit only */
- if (with_address)
- writel_(trans.offset & 0x00FFFFFF, cntlr->addr);
-
- /*
- * This is a 'no data' command (like Write Enable), its
- * bytesout size was 1, decremented to zero while executing
- * spi_setup_opcode() above. Tell the chip to send the
- * command.
- */
- writew_(control, cntlr->control);
-
- /* wait for the result */
- status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
- if (status == -1)
- return -1;
-
- if (status & SPIS_FCERR) {
- printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n");
- return -1;
- }
-
- goto spi_xfer_exit;
- }
-
- /*
- * Check if this is a write command attempting to transfer more bytes
- * than the controller can handle. Iterations for writes are not
- * supported here because each SPI write command needs to be preceded
- * and followed by other SPI commands, and this sequence is controlled
- * by the SPI chip driver.
- */
- if (trans.bytesout > cntlr->databytes) {
- printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use"
- " spi_crop_chunk()?\n");
- return -1;
- }
-
- /*
- * Read or write up to databytes bytes at a time until everything has
- * been sent.
- */
- while (trans.bytesout || trans.bytesin) {
- uint32_t data_length;
-
- /* SPI addresses are 24 bit only */
- writel_(trans.offset & 0x00FFFFFF, cntlr->addr);
-
- if (trans.bytesout)
- data_length = min(trans.bytesout, cntlr->databytes);
- else
- data_length = min(trans.bytesin, cntlr->databytes);
-
- /* Program data into FDATA0 to N */
- if (trans.bytesout) {
- write_reg(trans.out, cntlr->data, data_length);
- spi_use_out(&trans, data_length);
- if (with_address)
- trans.offset += data_length;
- }
-
- /* Add proper control fields' values */
- control &= ~((cntlr->databytes - 1) << 8);
- control |= SPIC_DS;
- control |= (data_length - 1) << 8;
-
- /* write it */
- writew_(control, cntlr->control);
-
- /* Wait for Cycle Done Status or Flash Cycle Error. */
- status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
- if (status == -1)
- return -1;
-
- if (status & SPIS_FCERR) {
- printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n");
- return -1;
- }
-
- if (trans.bytesin) {
- read_reg(cntlr->data, trans.in, data_length);
- spi_use_in(&trans, data_length);
- if (with_address)
- trans.offset += data_length;
- }
- }
-
-spi_xfer_exit:
- /* Clear atomic preop now that xfer is done */
- writew_(0, cntlr->preop);
-
- return 0;
-}
-
-static int xfer_vectors(const struct spi_slave *slave,
- struct spi_op vectors[], size_t count)
-{
- return spi_flash_vector_helper(slave, vectors, count, spi_ctrlr_xfer);
-}
-
-static const struct spi_ctrlr spi_ctrlr = {
- .xfer_vector = xfer_vectors,
- .max_xfer_size = member_size(ich9_spi_regs, fdata),
-};
-
-const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
- {
- .ctrlr = &spi_ctrlr,
- .bus_start = 0,
- .bus_end = 0,
- },
-};
-
-const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);
diff --git a/src/soc/intel/fsp_baytrail/tsc_freq.c b/src/soc/intel/fsp_baytrail/tsc_freq.c
deleted file mode 100644
index d31ddd9be3..0000000000
--- a/src/soc/intel/fsp_baytrail/tsc_freq.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <cpu/x86/msr.h>
-#include <cpu/x86/tsc.h>
-#include <soc/msr.h>
-#include <soc/baytrail.h>
-
-unsigned int bus_freq_khz(void)
-{
- msr_t clk_info = rdmsr(MSR_BSEL_CR_OVERCLOCK_CONTROL);
- switch (clk_info.lo & 0x3) {
- case 0:
- return 83333;
- case 1:
- return 100000;
- case 2:
- return 133333;
- case 3:
- return 116666;
- default:
- return 0;
- }
-}
-
-unsigned long tsc_freq_mhz(void)
-{
- msr_t platform_info;
- unsigned int bclk_khz = bus_freq_khz();
-
- if (!bclk_khz)
- return 0;
-
- platform_info = rdmsr(MSR_PLATFORM_INFO);
- return (bclk_khz * ((platform_info.lo >> 8) & 0xff)) / 1000;
-}
-
-void set_max_freq(void)
-{
- msr_t perf_ctl;
- msr_t msr;
-
- /* Enable speed step. */
- msr = rdmsr(IA32_MISC_ENABLE);
- msr.lo |= (1 << 16);
- wrmsr(IA32_MISC_ENABLE, msr);
-
- /* Set guaranteed ratio [21:16] from IACORE_RATIOS to bits [15:8] of
- * the PERF_CTL. */
- msr = rdmsr(MSR_IACORE_RATIOS);
- perf_ctl.lo = (msr.lo & 0x3f0000) >> 8;
- /* Set guaranteed vid [21:16] from IACORE_VIDS to bits [7:0] of
- * the PERF_CTL. */
- msr = rdmsr(MSR_IACORE_VIDS);
- perf_ctl.lo |= (msr.lo & 0x7f0000) >> 16;
- perf_ctl.hi = 0;
-
- wrmsr(IA32_PERF_CTL, perf_ctl);
-}
diff --git a/src/vendorcode/intel/Kconfig b/src/vendorcode/intel/Kconfig
index 027f12b66e..e1458db829 100644
--- a/src/vendorcode/intel/Kconfig
+++ b/src/vendorcode/intel/Kconfig
@@ -14,10 +14,6 @@
## GNU General Public License for more details.
##
-config FSP_VENDORCODE_HEADER_PATH
- string
- default "fsp1_0/baytrail" if SOC_INTEL_FSP_BAYTRAIL
-
config UEFI_2_4_BINDING
def_bool n
diff --git a/src/vendorcode/intel/Makefile.inc b/src/vendorcode/intel/Makefile.inc
index 33b2f81720..7b9ca5167e 100644
--- a/src/vendorcode/intel/Makefile.inc
+++ b/src/vendorcode/intel/Makefile.inc
@@ -14,15 +14,6 @@
## GNU General Public License for more details.
##
-ifneq ($(CONFIG_FSP_VENDORCODE_HEADER_PATH),)
-FSP_PATH := $(call strip_quotes,$(CONFIG_FSP_VENDORCODE_HEADER_PATH))
-FSP_SRC_FILES := $(wildcard src/vendorcode/intel/$(FSP_PATH)/srx/*.c)
-FSP_C_INPUTS := $(foreach file, $(FSP_SRC_FILES), $(FSP_PATH)/srx/$(notdir $(file)))
-ramstage-y += $(FSP_C_INPUTS)
-
-CFLAGS_x86_32 += -Isrc/vendorcode/intel/$(FSP_PATH)/include
-endif
-
ifeq ($(CONFIG_UEFI_2_4_BINDING),y)
# ProccessorBind.h provided in Ia32 directory. Types are derived from ia32.
# It's possible to provide our own ProcessorBind.h using posix types. However,
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/absf/minnowmax_1gb.absf b/src/vendorcode/intel/fsp1_0/baytrail/absf/minnowmax_1gb.absf
deleted file mode 100644
index 66ab0d774c..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/absf/minnowmax_1gb.absf
+++ /dev/null
@@ -1,328 +0,0 @@
-//
-// This file contains an 'Intel Peripheral Driver' and is
-// licensed for Intel CPUs and chipsets under the terms of your
-// license agreement with Intel or your vendor. This file must not
-// be modified by end users or could render the generated boot loader
-// inoperable.
-//
-// @file
-// Boot Setting File for Platform: Bayley Bay Platform
-//
-// Copyright (c) 2010-2013 Intel Corporation. All rights reserved
-// This software and associated documentation (if any) is furnished
-// under a license and may only be used or copied in accordance
-// with the terms of the license. Except as permitted by such
-// license, no part of this software or documentation may be
-// reproduced, stored in a retrieval system, or transmitted in any
-// form or by any means without the express written consent of
-// Intel Corporation.
-//
-//
-
-
-GlobalDataDef
- SKUID = 0 $_AS_BUILT_ = 0x01 , "DEFAULT"
-EndGlobalData
-
-StructDef
-
- Find "VLV2UPDR"
- Skip 24 bytes
- $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitTsegSize 2 bytes $_AS_BUILT_ = 0x1, 0x0 $_DEFAULT_ = 0x0001
- $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitMmioSize 2 bytes $_AS_BUILT_ = 0x0, 0x8 $_DEFAULT_ = 0x0800
- $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitSPDAddr1 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0xA0
- $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitSPDAddr2 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0xA2
- $gPlatformFspPkgTokenSpaceGuid_PcdeMMCBootMode 1 byte $_AS_BUILT_ = 0x3 $_DEFAULT_ = 2
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableSdio 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableSdcard 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsuart0 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsuart1 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableSpi 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableLan 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableSata 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdSataMode 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableAzalia 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
- $gPlatformFspPkgTokenSpaceGuid_AzaliaConfigPtr 4 bytes $_AS_BUILT_ = 0x0, 0x0, 0x0, 0x0 $_DEFAULT_ = 0
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableXhci 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableLpe 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdLpssSioEnablePciMode 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableDma0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableDma1 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C1 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C2 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C3 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C4 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C5 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C6 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnablePwm0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnablePwm1 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsi 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
- $gPlatformFspPkgTokenSpaceGuid_PcdIgdDvmt50PreAlloc 1 byte $_AS_BUILT_ = 0x2 $_DEFAULT_ = 2
- $gPlatformFspPkgTokenSpaceGuid_PcdApertureSize 1 byte $_AS_BUILT_ = 0x2 $_DEFAULT_ = 2
- $gPlatformFspPkgTokenSpaceGuid_PcdGttSize 1 byte $_AS_BUILT_ = 0x2 $_DEFAULT_ = 2
- $gPlatformFspPkgTokenSpaceGuid_ISPEnable 1 bytes $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
-
- Find "VLYVIEW1"
- $gPlatformFspPkgTokenSpaceGuid_PcdImageRevision 4 bytes $_AS_BUILT_ = 0x2, 0x3, 0x0, 0x0 $_DEFAULT_ = 0x00000302
- Skip 24 bytes
- $gPlatformFspPkgTokenSpaceGuid_PcdPlatformType 1 byte $_AS_BUILT_ = 0x2 $_DEFAULT_ = 2
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableSecureBoot 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 2
-
- $DIMM_MemDown 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 0
- $DRAM_Speed 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 2
- $DRAM_Type 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $Rank_En_0_0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $Rank_En_1_0 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
- $DIMM_DWidth_0_0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 0
- $DIMM_Density_0_0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $DIMM_BusWidth_0_0 1 byte $_AS_BUILT_ = 0x3 $_DEFAULT_ = 3
- $DIMM_Sides_0_0 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
- $tCL 1 byte $_AS_BUILT_ = 0x7 $_DEFAULT_ = 9
- $tRP_tRCD 1 byte $_AS_BUILT_ = 0x7 $_DEFAULT_ = 9
- $tWR 1 byte $_AS_BUILT_ = 0x8 $_DEFAULT_ = 10
- $tWTR 1 byte $_AS_BUILT_ = 0x4 $_DEFAULT_ = 5
- $tRRD 1 byte $_AS_BUILT_ = 0x6 $_DEFAULT_ = 4
- $tRTP 1 byte $_AS_BUILT_ = 0x4 $_DEFAULT_ = 5
- $tFAW 1 byte $_AS_BUILT_ = 0x14 $_DEFAULT_ = 20
-
-EndStruct
-
-List &DRAMSPEED
- Selection 0x0 , "800 MHz"
- Selection 0x1 , "1066 MHz"
- Selection 0x2 , "1333 MHz"
- Selection 0x3 , "1600 MHz"
-EndList
-
-List &DRAMTYPE
- Selection 0x0 , "DDR3"
- Selection 0x1 , "DDR3L"
- Selection 0x2 , "DDR3U"
- //Selection 0x3 , "LPDDR2"
- Selection 0x4 , "LPDDR2"
- Selection 0x5 , "LPDDR3"
- Selection 0x6 , "DDR4"
-EndList
-
-List &DIMMDWIDTH
- Selection 0x0 , "x8"
- Selection 0x1 , "x16"
- Selection 0x2 , "x32"
-EndList
-
-List &DIMMDENSITY
- Selection 0x0 , "1 Gbit"
- Selection 0x1 , "2 Gbit"
- Selection 0x2 , "4 Gbit"
- Selection 0x3 , "8 Gbit"
-EndList
-
-List &DIMMBUSWIDTH
- Selection 0x0 , "8 bits"
- Selection 0x1 , "16 bits"
- Selection 0x2 , "32 bits"
- Selection 0x3 , "64 bits"
-EndList
-
-List &RANKPERDIMM
- Selection 0x1 , "2 Ranks"
- Selection 0x0 , "1 Rank"
-EndList
-
-List &SATA_MODE
- Selection 0x1 , "AHCI"
- Selection 0x0 , "IDE"
-EndList
-
-List &EMMC_MODES
- Selection 0x0 , "Disabled"
- Selection 0x1 , "Auto"
- Selection 0x2 , "eMMC 4.1"
- Selection 0x3 , "eMMC 4.5"
-EndList
-
-List &EN_DIS
- Selection 0x1 , "Enabled"
- Selection 0x0 , "Disabled"
-EndList
-
-List &EN_DIS_AUTO
- Selection 0x2 , "Auto"
- Selection 0x1 , "Enabled"
- Selection 0x0 , "Disabled"
-EndList
-
-List &MMIO_SIZES
- Selection 0x400, "1.0 GB"
- Selection 0x600, "1.5 GB"
- Selection 0x800, "2.0 GB"
-EndList
-
-List &TSEG_SIZES
- Selection 0x01, "1 MB"
- Selection 0x02, "2 MB"
- Selection 0x04, "4 MB"
- Selection 0x08, "8 MB"
-EndList
-
-List &IGDPREALLOC_SIZES
- Selection 0x01, "32 MB"
- Selection 0x02, "64 MB"
- Selection 0x03, "96 MB"
- Selection 0x04, "128 MB"
- Selection 0x05, "160 MB"
- Selection 0x06, "192 MB"
- Selection 0x07, "224 MB"
- Selection 0x08, "256 MB"
- Selection 0x09, "288 MB"
- Selection 0x0A, "320 MB"
- Selection 0x0B, "352 MB"
- Selection 0x0C, "384 MB"
- Selection 0x0D, "416 MB"
- Selection 0x0E, "448 MB"
- Selection 0x0F, "480 MB"
- Selection 0x10, "512 MB"
-EndList
-
-List &APERTURE_SIZES
- Selection 0x1 , "128 MB"
- Selection 0x2 , "256 MB"
- Selection 0x3 , "512 MB"
-EndList
-
-List &GTT_SIZES
- Selection 0x1 , "1 MB"
- Selection 0x2 , "2 MB"
-EndList
-
-List &PCI_ACPI
- Selection 0x2 , "ACPI Mode"
- Selection 0x1 , "PCI Mode"
- Selection 0x0 , "Disabled"
-EndList
-
-List &PLATFORM_TYPE
- Selection 0x2 , "BayleyBay Platform Type"
- Selection 0x3 , "BakerSport Platform (ECC) Type"
-EndList
-
-BeginInfoBlock
- PPVer "1.0"
- Description "MinnowMax"
-
-EndInfoBlock
-
-Page "Platform"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdPlatformType, "Platform Type", &PLATFORM_TYPE,
- Help "Select Platform Type."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableSecureBoot, "Enable Secure Boot", &EN_DIS_AUTO,
- Help "Enable/disable secure boot. Auto by default."
-EndPage
-
-Page "North Complex"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitTsegSize, "Tseg Size", &TSEG_SIZES,
- Help "Size of memory reserved for SMRAM, in MB."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitMmioSize, "Mmio Size", &MMIO_SIZES,
- Help "Size of memory address space reserved for MMIO (Memory Mapped I/O), in GB."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdIgdDvmt50PreAlloc, "Internal Graphics Pre-allocated Memory ", &IGDPREALLOC_SIZES,
- Help "Size of memory preallocated for internal graphics"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdApertureSize, "Aperture Size", &APERTURE_SIZES,
- Help "Select the Aperture Size"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdGttSize, "GTT Size", &GTT_SIZES,
- Help "Select the GTT Size"
- EditNum $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitSPDAddr1, "DIMM 0 SPD SMBus Address", HEX,
- Help "Address of DIMM 0. 8 bits"
- EditNum $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitSPDAddr2, "DIMM 1 SPD SMBus Address", HEX,
- Help "Address of DIMM 1. 8 bits"
-EndPage
-
-Page "Memory Down"
- Combo $DIMM_MemDown, "Enable Memory Down", &EN_DIS,
- Help "Enable = Memory Down, Disable = DIMM"
- Combo $DRAM_Speed, "DRAM Speed", &DRAMSPEED,
- Help "DRAM Speed"
- Combo $DRAM_Type, "DRAM Type", &DRAMTYPE,
- Help "DRAM Type"
- Combo $Rank_En_0_0, "DIMM 0 Enable", &EN_DIS,
- Help "Please populate DIMM slot 0 if only one DIMM is supported."
- Combo $Rank_En_1_0, "DIMM 1 Enable", &EN_DIS,
- Help "DIMM 1 has to be identical to DIMM 0."
- Combo $DIMM_DWidth_0_0, "DIMM_DWidth", &DIMMDWIDTH,
- Help "DRAM device data width."
- Combo $DIMM_Density_0_0, "DIMM_Density", &DIMMDENSITY,
- Help "DRAM device data density."
- Combo $DIMM_BusWidth_0_0, "DIMM_BusWidth", &DIMMBUSWIDTH,
- Help "DIMM Bus Width."
- Combo $DIMM_Sides_0_0, "DIMM_Sides", &RANKPERDIMM,
- Help "Ranks Per DIMM. "
- EditNum $tCL, "tCL", DEC,
- Help "tCL"
- EditNum $tRP_tRCD, "tRP_tRCD", DEC,
- Help "tRP and tRCD in DRAM clk - 5:12.5ns, 6:15ns, etc."
- EditNum $tWR, "tWR", DEC,
- Help "tWR in DRAM clk"
- EditNum $tWTR, "tWTR", DEC,
- Help "tWTR in DRAM clk"
- EditNum $tRRD, "tRRD", DEC,
- Help "tRRD in DRAM clk"
- EditNum $tRTP, "tRTP", DEC,
- Help "tRTP in DRAM clk"
- EditNum $tFAW, "tFAW", DEC,
- Help "tFAW in DRAM clk"
-EndPage
-
-Page "South Complex"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdSataMode, "Select SATA Mode", &SATA_MODE,
- Help "Select SATA boot mode. AHCI by default."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableXhci, "Enable XHCI", &EN_DIS,
- Help "Enable/disable XHCI. If enabled, all EHCI ports will be routed to XHCI and EHCI will be disabled."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdeMMCBootMode, "eMMC Boot Mode", &EMMC_MODES,
- Help "Select EMMC Mode."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableSdio, "Enable SDIO", &EN_DIS,
- Help "Enable/disable SDIO."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableSdcard, "Enable SD Card", &EN_DIS,
- Help "Enable/disable the SD Card."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsuart0, "Enable HSUART0", &EN_DIS,
- Help "Enable/disable HSUART0."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsuart1, "Enable HSUART1", &EN_DIS,
- Help "Enable/disable HSUART1."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableSpi, "Enable SPI", &EN_DIS,
- Help "Enable/disable SPI."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableLan, "Enable LAN", &EN_DIS,
- Help "Enable/disable LAN."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableAzalia, "Enable Azalia", &EN_DIS_AUTO,
- Help "Enable/disable Azalia. Auto by default."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableSata, "Enable SATA", &EN_DIS,
- Help "Enable/disable SATA."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableLpe, "Enable LPE", &PCI_ACPI,
- Help "Choose LPE Mode"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdLpssSioEnablePciMode, "Enable PCI mode for LPSS SIO devices", &EN_DIS,
- Help "Enable PCI Mode for LPSS SIO devices. If disabled, LPSS SIO devices will run in ACPI mode."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableDma0, "Enable DMA0", &EN_DIS,
- Help "Enable/disable DMA0"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableDma1, "Enable DMA1", &EN_DIS,
- Help "Enable/disable DMA1"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C0, "Enable I2C0", &EN_DIS,
- Help "Enable/disable I2C0"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C1, "Enable I2C1", &EN_DIS,
- Help "Enable/disable I2C1"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C2, "Enable I2C2", &EN_DIS,
- Help "Enable/disable I2C2"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C3, "Enable I2C3", &EN_DIS,
- Help "Enable/disable I2C3"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C4, "Enable I2C4", &EN_DIS,
- Help "Enable/disable I2C4"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C5, "Enable I2C5", &EN_DIS,
- Help "Enable/disable I2C5"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C6, "Enable I2C6", &EN_DIS,
- Help "Enable/disable I2C6"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnablePwm0, "Enable PWM0", &EN_DIS,
- Help "Enable/disable PWM0"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnablePwm1, "Enable PWM1", &EN_DIS,
- Help "Enable/disable PWM1"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsi, "Enable HSI", &EN_DIS,
- Help "Enable/disable HSI"
- Combo $gPlatformFspPkgTokenSpaceGuid_ISPEnable, "Enable ISP", &EN_DIS,
- Help "Enable/disable ISP."
-EndPage
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/absf/minnowmax_2gb.absf b/src/vendorcode/intel/fsp1_0/baytrail/absf/minnowmax_2gb.absf
deleted file mode 100644
index 6992fe7dce..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/absf/minnowmax_2gb.absf
+++ /dev/null
@@ -1,328 +0,0 @@
-//
-// This file contains an 'Intel Peripheral Driver' and is
-// licensed for Intel CPUs and chipsets under the terms of your
-// license agreement with Intel or your vendor. This file must not
-// be modified by end users or could render the generated boot loader
-// inoperable.
-//
-// @file
-// Boot Setting File for Platform: Bayley Bay Platform
-//
-// Copyright (c) 2010-2013 Intel Corporation. All rights reserved
-// This software and associated documentation (if any) is furnished
-// under a license and may only be used or copied in accordance
-// with the terms of the license. Except as permitted by such
-// license, no part of this software or documentation may be
-// reproduced, stored in a retrieval system, or transmitted in any
-// form or by any means without the express written consent of
-// Intel Corporation.
-//
-//
-
-
-GlobalDataDef
- SKUID = 0 $_AS_BUILT_ = 0x01 , "DEFAULT"
-EndGlobalData
-
-StructDef
-
- Find "VLV2UPDR"
- Skip 24 bytes
- $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitTsegSize 2 bytes $_AS_BUILT_ = 0x1, 0x0 $_DEFAULT_ = 0x0001
- $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitMmioSize 2 bytes $_AS_BUILT_ = 0x0, 0x8 $_DEFAULT_ = 0x0800
- $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitSPDAddr1 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0xA0
- $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitSPDAddr2 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0xA2
- $gPlatformFspPkgTokenSpaceGuid_PcdeMMCBootMode 1 byte $_AS_BUILT_ = 0x3 $_DEFAULT_ = 2
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableSdio 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableSdcard 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsuart0 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsuart1 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableSpi 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableLan 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableSata 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdSataMode 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableAzalia 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
- $gPlatformFspPkgTokenSpaceGuid_AzaliaConfigPtr 4 bytes $_AS_BUILT_ = 0x0, 0x0, 0x0, 0x0 $_DEFAULT_ = 0
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableXhci 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableLpe 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdLpssSioEnablePciMode 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableDma0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableDma1 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C1 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C2 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C3 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C4 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C5 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C6 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnablePwm0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnablePwm1 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsi 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
- $gPlatformFspPkgTokenSpaceGuid_PcdIgdDvmt50PreAlloc 1 byte $_AS_BUILT_ = 0x2 $_DEFAULT_ = 2
- $gPlatformFspPkgTokenSpaceGuid_PcdApertureSize 1 byte $_AS_BUILT_ = 0x2 $_DEFAULT_ = 2
- $gPlatformFspPkgTokenSpaceGuid_PcdGttSize 1 byte $_AS_BUILT_ = 0x2 $_DEFAULT_ = 2
- $gPlatformFspPkgTokenSpaceGuid_ISPEnable 1 bytes $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
-
- Find "VLYVIEW1"
- $gPlatformFspPkgTokenSpaceGuid_PcdImageRevision 4 bytes $_AS_BUILT_ = 0x2, 0x3, 0x0, 0x0 $_DEFAULT_ = 0x00000302
- Skip 24 bytes
- $gPlatformFspPkgTokenSpaceGuid_PcdPlatformType 1 byte $_AS_BUILT_ = 0x2 $_DEFAULT_ = 2
- $gPlatformFspPkgTokenSpaceGuid_PcdEnableSecureBoot 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 2
-
- $DIMM_MemDown 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 0
- $DRAM_Speed 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 2
- $DRAM_Type 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $Rank_En_0_0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 1
- $Rank_En_1_0 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
- $DIMM_DWidth_0_0 1 byte $_AS_BUILT_ = 0x1 $_DEFAULT_ = 0
- $DIMM_Density_0_0 1 byte $_AS_BUILT_ = 0x2 $_DEFAULT_ = 1
- $DIMM_BusWidth_0_0 1 byte $_AS_BUILT_ = 0x3 $_DEFAULT_ = 3
- $DIMM_Sides_0_0 1 byte $_AS_BUILT_ = 0x0 $_DEFAULT_ = 0
- $tCL 1 byte $_AS_BUILT_ = 0x7 $_DEFAULT_ = 9
- $tRP_tRCD 1 byte $_AS_BUILT_ = 0x7 $_DEFAULT_ = 9
- $tWR 1 byte $_AS_BUILT_ = 0x8 $_DEFAULT_ = 10
- $tWTR 1 byte $_AS_BUILT_ = 0x4 $_DEFAULT_ = 5
- $tRRD 1 byte $_AS_BUILT_ = 0x6 $_DEFAULT_ = 4
- $tRTP 1 byte $_AS_BUILT_ = 0x4 $_DEFAULT_ = 5
- $tFAW 1 byte $_AS_BUILT_ = 0x14 $_DEFAULT_ = 20
-
-EndStruct
-
-List &DRAMSPEED
- Selection 0x0 , "800 MHz"
- Selection 0x1 , "1066 MHz"
- Selection 0x2 , "1333 MHz"
- Selection 0x3 , "1600 MHz"
-EndList
-
-List &DRAMTYPE
- Selection 0x0 , "DDR3"
- Selection 0x1 , "DDR3L"
- Selection 0x2 , "DDR3U"
- //Selection 0x3 , "LPDDR2"
- Selection 0x4 , "LPDDR2"
- Selection 0x5 , "LPDDR3"
- Selection 0x6 , "DDR4"
-EndList
-
-List &DIMMDWIDTH
- Selection 0x0 , "x8"
- Selection 0x1 , "x16"
- Selection 0x2 , "x32"
-EndList
-
-List &DIMMDENSITY
- Selection 0x0 , "1 Gbit"
- Selection 0x1 , "2 Gbit"
- Selection 0x2 , "4 Gbit"
- Selection 0x3 , "8 Gbit"
-EndList
-
-List &DIMMBUSWIDTH
- Selection 0x0 , "8 bits"
- Selection 0x1 , "16 bits"
- Selection 0x2 , "32 bits"
- Selection 0x3 , "64 bits"
-EndList
-
-List &RANKPERDIMM
- Selection 0x1 , "2 Ranks"
- Selection 0x0 , "1 Rank"
-EndList
-
-List &SATA_MODE
- Selection 0x1 , "AHCI"
- Selection 0x0 , "IDE"
-EndList
-
-List &EMMC_MODES
- Selection 0x0 , "Disabled"
- Selection 0x1 , "Auto"
- Selection 0x2 , "eMMC 4.1"
- Selection 0x3 , "eMMC 4.5"
-EndList
-
-List &EN_DIS
- Selection 0x1 , "Enabled"
- Selection 0x0 , "Disabled"
-EndList
-
-List &EN_DIS_AUTO
- Selection 0x2 , "Auto"
- Selection 0x1 , "Enabled"
- Selection 0x0 , "Disabled"
-EndList
-
-List &MMIO_SIZES
- Selection 0x400, "1.0 GB"
- Selection 0x600, "1.5 GB"
- Selection 0x800, "2.0 GB"
-EndList
-
-List &TSEG_SIZES
- Selection 0x01, "1 MB"
- Selection 0x02, "2 MB"
- Selection 0x04, "4 MB"
- Selection 0x08, "8 MB"
-EndList
-
-List &IGDPREALLOC_SIZES
- Selection 0x01, "32 MB"
- Selection 0x02, "64 MB"
- Selection 0x03, "96 MB"
- Selection 0x04, "128 MB"
- Selection 0x05, "160 MB"
- Selection 0x06, "192 MB"
- Selection 0x07, "224 MB"
- Selection 0x08, "256 MB"
- Selection 0x09, "288 MB"
- Selection 0x0A, "320 MB"
- Selection 0x0B, "352 MB"
- Selection 0x0C, "384 MB"
- Selection 0x0D, "416 MB"
- Selection 0x0E, "448 MB"
- Selection 0x0F, "480 MB"
- Selection 0x10, "512 MB"
-EndList
-
-List &APERTURE_SIZES
- Selection 0x1 , "128 MB"
- Selection 0x2 , "256 MB"
- Selection 0x3 , "512 MB"
-EndList
-
-List &GTT_SIZES
- Selection 0x1 , "1 MB"
- Selection 0x2 , "2 MB"
-EndList
-
-List &PCI_ACPI
- Selection 0x2 , "ACPI Mode"
- Selection 0x1 , "PCI Mode"
- Selection 0x0 , "Disabled"
-EndList
-
-List &PLATFORM_TYPE
- Selection 0x2 , "BayleyBay Platform Type"
- Selection 0x3 , "BakerSport Platform (ECC) Type"
-EndList
-
-BeginInfoBlock
- PPVer "1.0"
- Description "MinnowMax"
-
-EndInfoBlock
-
-Page "Platform"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdPlatformType, "Platform Type", &PLATFORM_TYPE,
- Help "Select Platform Type."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableSecureBoot, "Enable Secure Boot", &EN_DIS_AUTO,
- Help "Enable/disable secure boot. Auto by default."
-EndPage
-
-Page "North Complex"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitTsegSize, "Tseg Size", &TSEG_SIZES,
- Help "Size of memory reserved for SMRAM, in MB."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitMmioSize, "Mmio Size", &MMIO_SIZES,
- Help "Size of memory address space reserved for MMIO (Memory Mapped I/O), in GB."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdIgdDvmt50PreAlloc, "Internal Graphics Pre-allocated Memory ", &IGDPREALLOC_SIZES,
- Help "Size of memory preallocated for internal graphics"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdApertureSize, "Aperture Size", &APERTURE_SIZES,
- Help "Select the Aperture Size"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdGttSize, "GTT Size", &GTT_SIZES,
- Help "Select the GTT Size"
- EditNum $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitSPDAddr1, "DIMM 0 SPD SMBus Address", HEX,
- Help "Address of DIMM 0. 8 bits"
- EditNum $gPlatformFspPkgTokenSpaceGuid_PcdMrcInitSPDAddr2, "DIMM 1 SPD SMBus Address", HEX,
- Help "Address of DIMM 1. 8 bits"
-EndPage
-
-Page "Memory Down"
- Combo $DIMM_MemDown, "Enable Memory Down", &EN_DIS,
- Help "Enable = Memory Down, Disable = DIMM"
- Combo $DRAM_Speed, "DRAM Speed", &DRAMSPEED,
- Help "DRAM Speed"
- Combo $DRAM_Type, "DRAM Type", &DRAMTYPE,
- Help "DRAM Type"
- Combo $Rank_En_0_0, "DIMM 0 Enable", &EN_DIS,
- Help "Please populate DIMM slot 0 if only one DIMM is supported."
- Combo $Rank_En_1_0, "DIMM 1 Enable", &EN_DIS,
- Help "DIMM 1 has to be identical to DIMM 0."
- Combo $DIMM_DWidth_0_0, "DIMM_DWidth", &DIMMDWIDTH,
- Help "DRAM device data width."
- Combo $DIMM_Density_0_0, "DIMM_Density", &DIMMDENSITY,
- Help "DRAM device data density."
- Combo $DIMM_BusWidth_0_0, "DIMM_BusWidth", &DIMMBUSWIDTH,
- Help "DIMM Bus Width."
- Combo $DIMM_Sides_0_0, "DIMM_Sides", &RANKPERDIMM,
- Help "Ranks Per DIMM. "
- EditNum $tCL, "tCL", DEC,
- Help "tCL"
- EditNum $tRP_tRCD, "tRP_tRCD", DEC,
- Help "tRP and tRCD in DRAM clk - 5:12.5ns, 6:15ns, etc."
- EditNum $tWR, "tWR", DEC,
- Help "tWR in DRAM clk"
- EditNum $tWTR, "tWTR", DEC,
- Help "tWTR in DRAM clk"
- EditNum $tRRD, "tRRD", DEC,
- Help "tRRD in DRAM clk"
- EditNum $tRTP, "tRTP", DEC,
- Help "tRTP in DRAM clk"
- EditNum $tFAW, "tFAW", DEC,
- Help "tFAW in DRAM clk"
-EndPage
-
-Page "South Complex"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdSataMode, "Select SATA Mode", &SATA_MODE,
- Help "Select SATA boot mode. AHCI by default."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableXhci, "Enable XHCI", &EN_DIS,
- Help "Enable/disable XHCI. If enabled, all EHCI ports will be routed to XHCI and EHCI will be disabled."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdeMMCBootMode, "eMMC Boot Mode", &EMMC_MODES,
- Help "Select EMMC Mode."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableSdio, "Enable SDIO", &EN_DIS,
- Help "Enable/disable SDIO."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableSdcard, "Enable SD Card", &EN_DIS,
- Help "Enable/disable the SD Card."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsuart0, "Enable HSUART0", &EN_DIS,
- Help "Enable/disable HSUART0."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsuart1, "Enable HSUART1", &EN_DIS,
- Help "Enable/disable HSUART1."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableSpi, "Enable SPI", &EN_DIS,
- Help "Enable/disable SPI."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableLan, "Enable LAN", &EN_DIS,
- Help "Enable/disable LAN."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableAzalia, "Enable Azalia", &EN_DIS_AUTO,
- Help "Enable/disable Azalia. Auto by default."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableSata, "Enable SATA", &EN_DIS,
- Help "Enable/disable SATA."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableLpe, "Enable LPE", &PCI_ACPI,
- Help "Choose LPE Mode"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdLpssSioEnablePciMode, "Enable PCI mode for LPSS SIO devices", &EN_DIS,
- Help "Enable PCI Mode for LPSS SIO devices. If disabled, LPSS SIO devices will run in ACPI mode."
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableDma0, "Enable DMA0", &EN_DIS,
- Help "Enable/disable DMA0"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableDma1, "Enable DMA1", &EN_DIS,
- Help "Enable/disable DMA1"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C0, "Enable I2C0", &EN_DIS,
- Help "Enable/disable I2C0"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C1, "Enable I2C1", &EN_DIS,
- Help "Enable/disable I2C1"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C2, "Enable I2C2", &EN_DIS,
- Help "Enable/disable I2C2"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C3, "Enable I2C3", &EN_DIS,
- Help "Enable/disable I2C3"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C4, "Enable I2C4", &EN_DIS,
- Help "Enable/disable I2C4"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C5, "Enable I2C5", &EN_DIS,
- Help "Enable/disable I2C5"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableI2C6, "Enable I2C6", &EN_DIS,
- Help "Enable/disable I2C6"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnablePwm0, "Enable PWM0", &EN_DIS,
- Help "Enable/disable PWM0"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnablePwm1, "Enable PWM1", &EN_DIS,
- Help "Enable/disable PWM1"
- Combo $gPlatformFspPkgTokenSpaceGuid_PcdEnableHsi, "Enable HSI", &EN_DIS,
- Help "Enable/disable HSI"
- Combo $gPlatformFspPkgTokenSpaceGuid_ISPEnable, "Enable ISP", &EN_DIS,
- Help "Enable/disable ISP."
-EndPage
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/include/azalia.h b/src/vendorcode/intel/fsp1_0/baytrail/include/azalia.h
deleted file mode 100644
index c58cf4ce4c..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/include/azalia.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/**@file
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-#ifndef _AZALIA_H_
-#define _AZALIA_H_
-
-#include <stdint.h>
-
-#pragma pack(1)
-
-typedef struct {
- uint32_t VendorDeviceId;
- uint16_t SubSystemId;
- uint8_t RevisionId; /// 0xFF applies to all steppings
- uint8_t FrontPanelSupport;
- uint16_t NumberOfRearJacks;
- uint16_t NumberOfFrontJacks;
-} PCH_AZALIA_VERB_TABLE_HEADER;
-
-typedef struct {
- PCH_AZALIA_VERB_TABLE_HEADER VerbTableHeader;
- uint32_t *VerbTableData;
-} PCH_AZALIA_VERB_TABLE;
-
-typedef struct {
- uint8_t Pme : 1; /// 0: Disable; 1: Enable
- uint8_t DS : 1; /// 0: Docking is not supported; 1:Docking is supported
- uint8_t DA : 1; /// 0: Docking is not attached; 1:Docking is attached
- uint8_t HdmiCodec : 1; /// 0: Disable; 1: Enable
- uint8_t AzaliaVCi : 1; /// 0: Disable; 1: Enable
- uint8_t Rsvdbits : 3;
- uint8_t AzaliaVerbTableNum; /// Number of verb tables provided by platform
- PCH_AZALIA_VERB_TABLE *AzaliaVerbTable; /// Pointer to the actual verb table(s)
- uint16_t ResetWaitTimer; /// The delay timer after Azalia reset, the value is number of microseconds
-} PCH_AZALIA_CONFIG;
-
-#pragma pack()
-
-#endif
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/include/fsp.h b/src/vendorcode/intel/fsp1_0/baytrail/include/fsp.h
deleted file mode 100644
index f2e1d8fabf..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/include/fsp.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/**
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-/** \file fsp.h
- *
- *
- */
-#include <stdint.h>
-#include "fsptypes.h"
-#include "fspfv.h"
-#include "fspffs.h"
-#include "fsphob.h"
-#include "fspapi.h"
-#include "fspplatform.h"
-#include "fspinfoheader.h"
-#include "fspvpd.h"
-
-#define FSP_HOB_RESOURCE_OWNER_FSP_GUID \
-{ 0x69a79759, 0x1373, 0x4367, { 0xa6, 0xc4, 0xc7, 0xf5, 0x9e, 0xfd, 0x98, 0x6e } }
-#define FSP_NON_VOLATILE_STORAGE_HOB_GUID \
-{ 0x721acf02, 0x4d77, 0x4c2a, { 0xb3, 0xdc, 0x27, 0xb, 0x7b, 0xa9, 0xe4, 0xb0 } }
-#define FSP_HOB_RESOURCE_OWNER_TSEG_GUID \
-{ 0xd038747c, 0xd00c, 0x4980, { 0xb3, 0x19, 0x49, 0x01, 0x99, 0xa4, 0x7d, 0x55 } }
-#define FSP_HOB_RESOURCE_OWNER_GRAPHICS_GUID \
-{ 0x9c7c3aa7, 0x5332, 0x4917, { 0x82, 0xb9, 0x56, 0xa5, 0xf3, 0xe6, 0x2a, 0x07 } }
-#define FSP_BOOTLOADER_TEMPORARY_MEMORY_HOB_GUID \
-{ 0xbbcff46c, 0xc8d3, 0x4113, { 0x89, 0x85, 0xb9, 0xd4, 0xf3, 0xb3, 0xf6, 0x4e } }
-
-//
-// 0x21 - 0xf..f are reserved.
-//
-#define BOOT_WITH_FULL_CONFIGURATION 0x00
-#define BOOT_WITH_MINIMAL_CONFIGURATION 0x01
-#define BOOT_ASSUMING_NO_CONFIGURATION_CHANGES 0x02
-#define BOOT_WITH_FULL_CONFIGURATION_PLUS_DIAGNOSTICS 0x03
-#define BOOT_WITH_DEFAULT_SETTINGS 0x04
-#define BOOT_ON_S4_RESUME 0x05
-#define BOOT_ON_S5_RESUME 0x06
-#define BOOT_ON_S2_RESUME 0x10
-#define BOOT_ON_S3_RESUME 0x11
-#define BOOT_ON_FLASH_UPDATE 0x12
-#define BOOT_IN_RECOVERY_MODE 0x20
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/include/fspapi.h b/src/vendorcode/intel/fsp1_0/baytrail/include/fspapi.h
deleted file mode 100644
index 26afc0efdf..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/include/fspapi.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/**
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-#ifndef _FSP_API_H_
-#define _FSP_API_H_
-
-#pragma pack(1)
-
-typedef VOID (* CONTINUATION_PROC)(EFI_STATUS Status, VOID *HobListPtr);
-
-typedef struct {
- VOID *NvsBufferPtr;
- VOID *RtBufferPtr;
- CONTINUATION_PROC ContinuationFunc;
-} FSP_INIT_PARAMS;
-
-typedef struct {
- UINT32 *StackTop;
- UINT32 BootMode;
- VOID *UpdDataRgnPtr;
- UINT32 Reserved[7];
-} FSP_INIT_RT_COMMON_BUFFER;
-
-typedef enum {
- EnumInitPhaseAfterPciEnumeration = 0x20,
- EnumInitPhaseReadyToBoot = 0x40
-} FSP_INIT_PHASE;
-
-typedef struct {
- FSP_INIT_PHASE Phase;
-} NOTIFY_PHASE_PARAMS;
-
-#pragma pack()
-
-typedef FSP_STATUS (FSPAPI *FSP_FSP_INIT) (FSP_INIT_PARAMS *FspInitParamPtr);
-typedef FSP_STATUS (FSPAPI *FSP_NOTFY_PHASE) (NOTIFY_PHASE_PARAMS *NotifyPhaseParamPtr);
-
-#endif
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/include/fspffs.h b/src/vendorcode/intel/fsp1_0/baytrail/include/fspffs.h
deleted file mode 100644
index f3b83b2a3e..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/include/fspffs.h
+++ /dev/null
@@ -1,506 +0,0 @@
-/**
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-
-#ifndef __PI_FIRMWARE_FILE_H__
-#define __PI_FIRMWARE_FILE_H__
-
-#pragma pack(1)
-///
-/// Used to verify the integrity of the file.
-///
-typedef union {
- struct {
- ///
- /// The IntegrityCheck.Checksum.Header field is an 8-bit checksum of the file
- /// header. The State and IntegrityCheck.Checksum.File fields are assumed
- /// to be zero and the checksum is calculated such that the entire header sums to zero.
- ///
- UINT8 Header;
- ///
- /// If the FFS_ATTRIB_CHECKSUM (see definition below) bit of the Attributes
- /// field is set to one, the IntegrityCheck.Checksum.File field is an 8-bit
- /// checksum of the file data.
- /// If the FFS_ATTRIB_CHECKSUM bit of the Attributes field is cleared to zero,
- /// the IntegrityCheck.Checksum.File field must be initialized with a value of
- /// 0xAA. The IntegrityCheck.Checksum.File field is valid any time the
- /// EFI_FILE_DATA_VALID bit is set in the State field.
- ///
- UINT8 File;
- } Checksum;
- ///
- /// This is the full 16 bits of the IntegrityCheck field.
- ///
- UINT16 Checksum16;
-} EFI_FFS_INTEGRITY_CHECK;
-
-///
-/// FFS_FIXED_CHECKSUM is the checksum value used when the
-/// FFS_ATTRIB_CHECKSUM attribute bit is clear.
-///
-#define FFS_FIXED_CHECKSUM 0xAA
-
-typedef UINT8 EFI_FV_FILETYPE;
-typedef UINT8 EFI_FFS_FILE_ATTRIBUTES;
-typedef UINT8 EFI_FFS_FILE_STATE;
-
-///
-/// File Types Definitions
-///
-#define EFI_FV_FILETYPE_ALL 0x00
-#define EFI_FV_FILETYPE_RAW 0x01
-#define EFI_FV_FILETYPE_FREEFORM 0x02
-#define EFI_FV_FILETYPE_SECURITY_CORE 0x03
-#define EFI_FV_FILETYPE_PEI_CORE 0x04
-#define EFI_FV_FILETYPE_DXE_CORE 0x05
-#define EFI_FV_FILETYPE_PEIM 0x06
-#define EFI_FV_FILETYPE_DRIVER 0x07
-#define EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER 0x08
-#define EFI_FV_FILETYPE_APPLICATION 0x09
-#define EFI_FV_FILETYPE_SMM 0x0A
-#define EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE 0x0B
-#define EFI_FV_FILETYPE_COMBINED_SMM_DXE 0x0C
-#define EFI_FV_FILETYPE_SMM_CORE 0x0D
-#define EFI_FV_FILETYPE_OEM_MIN 0xc0
-#define EFI_FV_FILETYPE_OEM_MAX 0xdf
-#define EFI_FV_FILETYPE_DEBUG_MIN 0xe0
-#define EFI_FV_FILETYPE_DEBUG_MAX 0xef
-#define EFI_FV_FILETYPE_FFS_MIN 0xf0
-#define EFI_FV_FILETYPE_FFS_MAX 0xff
-#define EFI_FV_FILETYPE_FFS_PAD 0xf0
-///
-/// FFS File Attributes.
-///
-#define FFS_ATTRIB_LARGE_FILE 0x01
-#define FFS_ATTRIB_FIXED 0x04
-#define FFS_ATTRIB_DATA_ALIGNMENT 0x38
-#define FFS_ATTRIB_CHECKSUM 0x40
-
-///
-/// FFS File State Bits.
-///
-#define EFI_FILE_HEADER_CONSTRUCTION 0x01
-#define EFI_FILE_HEADER_VALID 0x02
-#define EFI_FILE_DATA_VALID 0x04
-#define EFI_FILE_MARKED_FOR_UPDATE 0x08
-#define EFI_FILE_DELETED 0x10
-#define EFI_FILE_HEADER_INVALID 0x20
-
-
-///
-/// Each file begins with the header that describe the
-/// contents and state of the files.
-///
-typedef struct {
- ///
- /// This GUID is the file name. It is used to uniquely identify the file.
- ///
- EFI_GUID Name;
- ///
- /// Used to verify the integrity of the file.
- ///
- EFI_FFS_INTEGRITY_CHECK IntegrityCheck;
- ///
- /// Identifies the type of file.
- ///
- EFI_FV_FILETYPE Type;
- ///
- /// Declares various file attribute bits.
- ///
- EFI_FFS_FILE_ATTRIBUTES Attributes;
- ///
- /// The length of the file in bytes, including the FFS header.
- ///
- UINT8 Size[3];
- ///
- /// Used to track the state of the file throughout the life of the file from creation to deletion.
- ///
- EFI_FFS_FILE_STATE State;
-} EFI_FFS_FILE_HEADER;
-
-typedef struct {
- ///
- /// This GUID is the file name. It is used to uniquely identify the file. There may be only
- /// one instance of a file with the file name GUID of Name in any given firmware
- /// volume, except if the file type is EFI_FV_FILETYPE_FFS_PAD.
- ///
- EFI_GUID Name;
-
- ///
- /// Used to verify the integrity of the file.
- ///
- EFI_FFS_INTEGRITY_CHECK IntegrityCheck;
-
- ///
- /// Identifies the type of file.
- ///
- EFI_FV_FILETYPE Type;
-
- ///
- /// Declares various file attribute bits.
- ///
- EFI_FFS_FILE_ATTRIBUTES Attributes;
-
- ///
- /// The length of the file in bytes, including the FFS header.
- /// The length of the file data is either (Size - sizeof(EFI_FFS_FILE_HEADER)). This calculation means a
- /// zero-length file has a Size of 24 bytes, which is sizeof(EFI_FFS_FILE_HEADER).
- /// Size is not required to be a multiple of 8 bytes. Given a file F, the next file header is
- /// located at the next 8-byte aligned firmware volume offset following the last byte of the file F.
- ///
- UINT8 Size[3];
-
- ///
- /// Used to track the state of the file throughout the life of the file from creation to deletion.
- ///
- EFI_FFS_FILE_STATE State;
-
- ///
- /// If FFS_ATTRIB_LARGE_FILE is set in Attributes, then ExtendedSize exists and Size must be set to zero.
- /// If FFS_ATTRIB_LARGE_FILE is not set then EFI_FFS_FILE_HEADER is used.
- ///
- UINT32 ExtendedSize;
-} EFI_FFS_FILE_HEADER2;
-
-#define IS_FFS_FILE2(FfsFileHeaderPtr) \
- (((((EFI_FFS_FILE_HEADER *) (UINTN) FfsFileHeaderPtr)->Attributes) & FFS_ATTRIB_LARGE_FILE) == FFS_ATTRIB_LARGE_FILE)
-
-#define FFS_FILE_SIZE(FfsFileHeaderPtr) \
- ((UINT32) (*((UINT32 *) ((EFI_FFS_FILE_HEADER *) (UINTN) FfsFileHeaderPtr)->Size) & 0x00ffffff))
-
-#define FFS_FILE2_SIZE(FfsFileHeaderPtr) \
- (((EFI_FFS_FILE_HEADER2 *) (UINTN) FfsFileHeaderPtr)->ExtendedSize)
-
-typedef UINT8 EFI_SECTION_TYPE;
-
-///
-/// Pseudo type. It is used as a wild card when retrieving sections.
-/// The section type EFI_SECTION_ALL matches all section types.
-///
-#define EFI_SECTION_ALL 0x00
-
-///
-/// Encapsulation section Type values.
-///
-#define EFI_SECTION_COMPRESSION 0x01
-
-#define EFI_SECTION_GUID_DEFINED 0x02
-
-#define EFI_SECTION_DISPOSABLE 0x03
-
-///
-/// Leaf section Type values.
-///
-#define EFI_SECTION_PE32 0x10
-#define EFI_SECTION_PIC 0x11
-#define EFI_SECTION_TE 0x12
-#define EFI_SECTION_DXE_DEPEX 0x13
-#define EFI_SECTION_VERSION 0x14
-#define EFI_SECTION_USER_INTERFACE 0x15
-#define EFI_SECTION_COMPATIBILITY16 0x16
-#define EFI_SECTION_FIRMWARE_VOLUME_IMAGE 0x17
-#define EFI_SECTION_FREEFORM_SUBTYPE_GUID 0x18
-#define EFI_SECTION_RAW 0x19
-#define EFI_SECTION_PEI_DEPEX 0x1B
-#define EFI_SECTION_SMM_DEPEX 0x1C
-
-///
-/// Common section header.
-///
-typedef struct {
- ///
- /// A 24-bit unsigned integer that contains the total size of the section in bytes,
- /// including the EFI_COMMON_SECTION_HEADER.
- ///
- UINT8 Size[3];
- EFI_SECTION_TYPE Type;
- ///
- /// Declares the section type.
- ///
-} EFI_COMMON_SECTION_HEADER;
-
-typedef struct {
- ///
- /// A 24-bit unsigned integer that contains the total size of the section in bytes,
- /// including the EFI_COMMON_SECTION_HEADER.
- ///
- UINT8 Size[3];
-
- EFI_SECTION_TYPE Type;
-
- ///
- /// If Size is 0xFFFFFF, then ExtendedSize contains the size of the section. If
- /// Size is not equal to 0xFFFFFF, then this field does not exist.
- ///
- UINT32 ExtendedSize;
-} EFI_COMMON_SECTION_HEADER2;
-
-///
-/// Leaf section type that contains an
-/// IA-32 16-bit executable image.
-///
-typedef EFI_COMMON_SECTION_HEADER EFI_COMPATIBILITY16_SECTION;
-typedef EFI_COMMON_SECTION_HEADER2 EFI_COMPATIBILITY16_SECTION2;
-
-///
-/// CompressionType of EFI_COMPRESSION_SECTION.
-///
-#define EFI_NOT_COMPRESSED 0x00
-#define EFI_STANDARD_COMPRESSION 0x01
-///
-/// An encapsulation section type in which the
-/// section data is compressed.
-///
-typedef struct {
- ///
- /// Usual common section header. CommonHeader.Type = EFI_SECTION_COMPRESSION.
- ///
- EFI_COMMON_SECTION_HEADER CommonHeader;
- ///
- /// The UINT32 that indicates the size of the section data after decompression.
- ///
- UINT32 UncompressedLength;
- ///
- /// Indicates which compression algorithm is used.
- ///
- UINT8 CompressionType;
-} EFI_COMPRESSION_SECTION;
-
-typedef struct {
- ///
- /// Usual common section header. CommonHeader.Type = EFI_SECTION_COMPRESSION.
- ///
- EFI_COMMON_SECTION_HEADER2 CommonHeader;
- ///
- /// UINT32 that indicates the size of the section data after decompression.
- ///
- UINT32 UncompressedLength;
- ///
- /// Indicates which compression algorithm is used.
- ///
- UINT8 CompressionType;
-} EFI_COMPRESSION_SECTION2;
-
-///
-/// An encapsulation section type in which the section data is disposable.
-/// A disposable section is an encapsulation section in which the section data may be disposed of during
-/// the process of creating or updating a firmware image without significant impact on the usefulness of
-/// the file. The Type field in the section header is set to EFI_SECTION_DISPOSABLE. This
-/// allows optional or descriptive data to be included with the firmware file which can be removed in
-/// order to conserve space. The contents of this section are implementation specific, but might contain
-/// debug data or detailed integration instructions.
-///
-typedef EFI_COMMON_SECTION_HEADER EFI_DISPOSABLE_SECTION;
-typedef EFI_COMMON_SECTION_HEADER2 EFI_DISPOSABLE_SECTION2;
-
-///
-/// The leaf section which could be used to determine the dispatch order of DXEs.
-///
-typedef EFI_COMMON_SECTION_HEADER EFI_DXE_DEPEX_SECTION;
-typedef EFI_COMMON_SECTION_HEADER2 EFI_DXE_DEPEX_SECTION2;
-
-///
-/// The leaf section which contains a PI FV.
-///
-typedef EFI_COMMON_SECTION_HEADER EFI_FIRMWARE_VOLUME_IMAGE_SECTION;
-typedef EFI_COMMON_SECTION_HEADER2 EFI_FIRMWARE_VOLUME_IMAGE_SECTION2;
-
-///
-/// The leaf section which contains a single GUID.
-///
-typedef struct {
- ///
- /// Common section header. CommonHeader.Type = EFI_SECTION_FREEFORM_SUBTYPE_GUID.
- ///
- EFI_COMMON_SECTION_HEADER CommonHeader;
- ///
- /// This GUID is defined by the creator of the file. It is a vendor-defined file type.
- ///
- EFI_GUID SubTypeGuid;
-} EFI_FREEFORM_SUBTYPE_GUID_SECTION;
-
-typedef struct {
- ///
- /// The common section header. CommonHeader.Type = EFI_SECTION_FREEFORM_SUBTYPE_GUID.
- ///
- EFI_COMMON_SECTION_HEADER2 CommonHeader;
- ///
- /// This GUID is defined by the creator of the file. It is a vendor-defined file type.
- ///
- EFI_GUID SubTypeGuid;
-} EFI_FREEFORM_SUBTYPE_GUID_SECTION2;
-
-///
-/// Attributes of EFI_GUID_DEFINED_SECTION.
-///
-#define EFI_GUIDED_SECTION_PROCESSING_REQUIRED 0x01
-#define EFI_GUIDED_SECTION_AUTH_STATUS_VALID 0x02
-///
-/// The leaf section which is encapsulation defined by specific GUID.
-///
-typedef struct {
- ///
- /// The common section header. CommonHeader.Type = EFI_SECTION_GUID_DEFINED.
- ///
- EFI_COMMON_SECTION_HEADER CommonHeader;
- ///
- /// The GUID that defines the format of the data that follows. It is a vendor-defined section type.
- ///
- EFI_GUID SectionDefinitionGuid;
- ///
- /// Contains the offset in bytes from the beginning of the common header to the first byte of the data.
- ///
- UINT16 DataOffset;
- ///
- /// The bit field that declares some specific characteristics of the section contents.
- ///
- UINT16 Attributes;
-} EFI_GUID_DEFINED_SECTION;
-
-typedef struct {
- ///
- /// The common section header. CommonHeader.Type = EFI_SECTION_GUID_DEFINED.
- ///
- EFI_COMMON_SECTION_HEADER2 CommonHeader;
- ///
- /// The GUID that defines the format of the data that follows. It is a vendor-defined section type.
- ///
- EFI_GUID SectionDefinitionGuid;
- ///
- /// Contains the offset in bytes from the beginning of the common header to the first byte of the data.
- ///
- UINT16 DataOffset;
- ///
- /// The bit field that declares some specific characteristics of the section contents.
- ///
- UINT16 Attributes;
-} EFI_GUID_DEFINED_SECTION2;
-
-///
-/// The leaf section which contains PE32+ image.
-///
-typedef EFI_COMMON_SECTION_HEADER EFI_PE32_SECTION;
-typedef EFI_COMMON_SECTION_HEADER2 EFI_PE32_SECTION2;
-
-///
-/// The leaf section used to determine the dispatch order of PEIMs.
-///
-typedef EFI_COMMON_SECTION_HEADER EFI_PEI_DEPEX_SECTION;
-typedef EFI_COMMON_SECTION_HEADER2 EFI_PEI_DEPEX_SECTION2;
-
-///
-/// A leaf section type that contains a position-independent-code (PIC) image.
-/// A PIC image section is a leaf section that contains a position-independent-code (PIC) image.
-/// In addition to normal PE32+ images that contain relocation information, PEIM executables may be
-/// PIC and are referred to as PIC images. A PIC image is the same as a PE32+ image except that all
-/// relocation information has been stripped from the image and the image can be moved and will
-/// execute correctly without performing any relocation or other fix-ups. EFI_PIC_SECTION2 must
-/// be used if the section is 16MB or larger.
-///
-typedef EFI_COMMON_SECTION_HEADER EFI_PIC_SECTION;
-typedef EFI_COMMON_SECTION_HEADER2 EFI_PIC_SECTION2;
-
-///
-/// The leaf section which constains the position-independent-code image.
-///
-typedef EFI_COMMON_SECTION_HEADER EFI_TE_SECTION;
-typedef EFI_COMMON_SECTION_HEADER2 EFI_TE_SECTION2;
-
-///
-/// The leaf section which contains an array of zero or more bytes.
-///
-typedef EFI_COMMON_SECTION_HEADER EFI_RAW_SECTION;
-typedef EFI_COMMON_SECTION_HEADER2 EFI_RAW_SECTION2;
-
-///
-/// The SMM dependency expression section is a leaf section that contains a dependency expression that
-/// is used to determine the dispatch order for SMM drivers. Before the SMRAM invocation of the
-/// SMM driver's entry point, this dependency expression must evaluate to TRUE. See the Platform
-/// Initialization Specification, Volume 2, for details regarding the format of the dependency expression.
-/// The dependency expression may refer to protocols installed in either the UEFI or the SMM protocol
-/// database. EFI_SMM_DEPEX_SECTION2 must be used if the section is 16MB or larger.
-///
-typedef EFI_COMMON_SECTION_HEADER EFI_SMM_DEPEX_SECTION;
-typedef EFI_COMMON_SECTION_HEADER2 EFI_SMM_DEPEX_SECTION2;
-
-///
-/// The leaf section which contains a unicode string that
-/// is human readable file name.
-///
-typedef struct {
- EFI_COMMON_SECTION_HEADER CommonHeader;
-
- ///
- /// Array of unicode string.
- ///
- CHAR16 FileNameString[1];
-} EFI_USER_INTERFACE_SECTION;
-
-typedef struct {
- EFI_COMMON_SECTION_HEADER2 CommonHeader;
- CHAR16 FileNameString[1];
-} EFI_USER_INTERFACE_SECTION2;
-
-///
-/// The leaf section which contains a numeric build number and
-/// an optional unicode string that represents the file revision.
-///
-typedef struct {
- EFI_COMMON_SECTION_HEADER CommonHeader;
- UINT16 BuildNumber;
-
- ///
- /// Array of unicode string.
- ///
- CHAR16 VersionString[1];
-} EFI_VERSION_SECTION;
-
-typedef struct {
- EFI_COMMON_SECTION_HEADER2 CommonHeader;
- ///
- /// A UINT16 that represents a particular build. Subsequent builds have monotonically
- /// increasing build numbers relative to earlier builds.
- ///
- UINT16 BuildNumber;
- CHAR16 VersionString[1];
-} EFI_VERSION_SECTION2;
-
-#define IS_SECTION2(SectionHeaderPtr) \
- ((UINT32) (*((UINT32 *) ((EFI_COMMON_SECTION_HEADER *) (UINTN) SectionHeaderPtr)->Size) & 0x00ffffff) == 0x00ffffff)
-
-#define SECTION_SIZE(SectionHeaderPtr) \
- ((UINT32) (*((UINT32 *) ((EFI_COMMON_SECTION_HEADER *) (UINTN) SectionHeaderPtr)->Size) & 0x00ffffff))
-
-#define SECTION2_SIZE(SectionHeaderPtr) \
- (((EFI_COMMON_SECTION_HEADER2 *) (UINTN) SectionHeaderPtr)->ExtendedSize)
-
-#pragma pack()
-
-#endif
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/include/fspfv.h b/src/vendorcode/intel/fsp1_0/baytrail/include/fspfv.h
deleted file mode 100644
index 26c00f266a..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/include/fspfv.h
+++ /dev/null
@@ -1,247 +0,0 @@
-/**
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-#ifndef __PI_FIRMWAREVOLUME_H__
-#define __PI_FIRMWAREVOLUME_H__
-
-///
-/// EFI_FV_FILE_ATTRIBUTES
-///
-typedef UINT32 EFI_FV_FILE_ATTRIBUTES;
-
-//
-// Value of EFI_FV_FILE_ATTRIBUTES.
-//
-#define EFI_FV_FILE_ATTRIB_ALIGNMENT 0x0000001F
-#define EFI_FV_FILE_ATTRIB_FIXED 0x00000100
-#define EFI_FV_FILE_ATTRIB_MEMORY_MAPPED 0x00000200
-
-///
-/// type of EFI FVB attribute
-///
-typedef UINT32 EFI_FVB_ATTRIBUTES_2;
-
-//
-// Attributes bit definitions
-//
-#define EFI_FVB2_READ_DISABLED_CAP 0x00000001
-#define EFI_FVB2_READ_ENABLED_CAP 0x00000002
-#define EFI_FVB2_READ_STATUS 0x00000004
-#define EFI_FVB2_WRITE_DISABLED_CAP 0x00000008
-#define EFI_FVB2_WRITE_ENABLED_CAP 0x00000010
-#define EFI_FVB2_WRITE_STATUS 0x00000020
-#define EFI_FVB2_LOCK_CAP 0x00000040
-#define EFI_FVB2_LOCK_STATUS 0x00000080
-#define EFI_FVB2_STICKY_WRITE 0x00000200
-#define EFI_FVB2_MEMORY_MAPPED 0x00000400
-#define EFI_FVB2_ERASE_POLARITY 0x00000800
-#define EFI_FVB2_READ_LOCK_CAP 0x00001000
-#define EFI_FVB2_READ_LOCK_STATUS 0x00002000
-#define EFI_FVB2_WRITE_LOCK_CAP 0x00004000
-#define EFI_FVB2_WRITE_LOCK_STATUS 0x00008000
-#define EFI_FVB2_ALIGNMENT 0x001F0000
-#define EFI_FVB2_ALIGNMENT_1 0x00000000
-#define EFI_FVB2_ALIGNMENT_2 0x00010000
-#define EFI_FVB2_ALIGNMENT_4 0x00020000
-#define EFI_FVB2_ALIGNMENT_8 0x00030000
-#define EFI_FVB2_ALIGNMENT_16 0x00040000
-#define EFI_FVB2_ALIGNMENT_32 0x00050000
-#define EFI_FVB2_ALIGNMENT_64 0x00060000
-#define EFI_FVB2_ALIGNMENT_128 0x00070000
-#define EFI_FVB2_ALIGNMENT_256 0x00080000
-#define EFI_FVB2_ALIGNMENT_512 0x00090000
-#define EFI_FVB2_ALIGNMENT_1K 0x000A0000
-#define EFI_FVB2_ALIGNMENT_2K 0x000B0000
-#define EFI_FVB2_ALIGNMENT_4K 0x000C0000
-#define EFI_FVB2_ALIGNMENT_8K 0x000D0000
-#define EFI_FVB2_ALIGNMENT_16K 0x000E0000
-#define EFI_FVB2_ALIGNMENT_32K 0x000F0000
-#define EFI_FVB2_ALIGNMENT_64K 0x00100000
-#define EFI_FVB2_ALIGNMENT_128K 0x00110000
-#define EFI_FVB2_ALIGNMENT_256K 0x00120000
-#define EFI_FVB2_ALIGNMENT_512K 0x00130000
-#define EFI_FVB2_ALIGNMENT_1M 0x00140000
-#define EFI_FVB2_ALIGNMENT_2M 0x00150000
-#define EFI_FVB2_ALIGNMENT_4M 0x00160000
-#define EFI_FVB2_ALIGNMENT_8M 0x00170000
-#define EFI_FVB2_ALIGNMENT_16M 0x00180000
-#define EFI_FVB2_ALIGNMENT_32M 0x00190000
-#define EFI_FVB2_ALIGNMENT_64M 0x001A0000
-#define EFI_FVB2_ALIGNMENT_128M 0x001B0000
-#define EFI_FVB2_ALIGNMENT_256M 0x001C0000
-#define EFI_FVB2_ALIGNMENT_512M 0x001D0000
-#define EFI_FVB2_ALIGNMENT_1G 0x001E0000
-#define EFI_FVB2_ALIGNMENT_2G 0x001F0000
-
-
-typedef struct {
- ///
- /// The number of sequential blocks which are of the same size.
- ///
- UINT32 NumBlocks;
- ///
- /// The size of the blocks.
- ///
- UINT32 Length;
-} EFI_FV_BLOCK_MAP_ENTRY;
-
-///
-/// Describes the features and layout of the firmware volume.
-///
-typedef struct {
- ///
- /// The first 16 bytes are reserved to allow for the reset vector of
- /// processors whose reset vector is at address 0.
- ///
- UINT8 ZeroVector[16];
- ///
- /// Declares the file system with which the firmware volume is formatted.
- ///
- EFI_GUID FileSystemGuid;
- ///
- /// Length in bytes of the complete firmware volume, including the header.
- ///
- UINT64 FvLength;
- ///
- /// Set to EFI_FVH_SIGNATURE
- ///
- UINT32 Signature;
- ///
- /// Declares capabilities and power-on defaults for the firmware volume.
- ///
- EFI_FVB_ATTRIBUTES_2 Attributes;
- ///
- /// Length in bytes of the complete firmware volume header.
- ///
- UINT16 HeaderLength;
- ///
- /// A 16-bit checksum of the firmware volume header. A valid header sums to zero.
- ///
- UINT16 Checksum;
- ///
- /// Offset, relative to the start of the header, of the extended header
- /// (EFI_FIRMWARE_VOLUME_EXT_HEADER) or zero if there is no extended header.
- ///
- UINT16 ExtHeaderOffset;
- ///
- /// This field must always be set to zero.
- ///
- UINT8 Reserved[1];
- ///
- /// Set to 2. Future versions of this specification may define new header fields and will
- /// increment the Revision field accordingly.
- ///
- UINT8 Revision;
- ///
- /// An array of run-length encoded FvBlockMapEntry structures. The array is
- /// terminated with an entry of {0,0}.
- ///
- EFI_FV_BLOCK_MAP_ENTRY BlockMap[1];
-} EFI_FIRMWARE_VOLUME_HEADER;
-
-#define EFI_FVH_SIGNATURE SIGNATURE_32 ('_', 'F', 'V', 'H')
-
-///
-/// Firmware Volume Header Revision definition
-///
-#define EFI_FVH_REVISION 0x02
-
-///
-/// Extension header pointed by ExtHeaderOffset of volume header.
-///
-typedef struct {
- ///
- /// Firmware volume name.
- ///
- EFI_GUID FvName;
- ///
- /// Size of the rest of the extension header, including this structure.
- ///
- UINT32 ExtHeaderSize;
-} EFI_FIRMWARE_VOLUME_EXT_HEADER;
-
-///
-/// Entry struture for describing FV extension header
-///
-typedef struct {
- ///
- /// Size of this header extension.
- ///
- UINT16 ExtEntrySize;
- ///
- /// Type of the header.
- ///
- UINT16 ExtEntryType;
-} EFI_FIRMWARE_VOLUME_EXT_ENTRY;
-
-#define EFI_FV_EXT_TYPE_OEM_TYPE 0x01
-///
-/// This extension header provides a mapping between a GUID and an OEM file type.
-///
-typedef struct {
- ///
- /// Standard extension entry, with the type EFI_FV_EXT_TYPE_OEM_TYPE.
- ///
- EFI_FIRMWARE_VOLUME_EXT_ENTRY Hdr;
- ///
- /// A bit mask, one bit for each file type between 0xC0 (bit 0) and 0xDF (bit 31). If a bit
- /// is '1', then the GUID entry exists in Types. If a bit is '0' then no GUID entry exists in Types.
- ///
- UINT32 TypeMask;
- ///
- /// An array of GUIDs, each GUID representing an OEM file type.
- ///
- /// EFI_GUID Types[1];
- ///
-} EFI_FIRMWARE_VOLUME_EXT_ENTRY_OEM_TYPE;
-
-#define EFI_FV_EXT_TYPE_GUID_TYPE 0x0002
-
-///
-/// This extension header EFI_FIRMWARE_VOLUME_EXT_ENTRY_GUID_TYPE provides a vendor specific
-/// GUID FormatType type which includes a length and a successive series of data bytes.
-///
-typedef struct {
- ///
- /// Standard extension entry, with the type EFI_FV_EXT_TYPE_OEM_TYPE.
- ///
- EFI_FIRMWARE_VOLUME_EXT_ENTRY Hdr;
- ///
- /// Vendor-specific GUID.
- ///
- EFI_GUID FormatType;
- ///
- /// An arry of bytes of length Length.
- ///
- /// UINT8 Data[1];
- ///
-} EFI_FIRMWARE_VOLUME_EXT_ENTRY_GUID_TYPE;
-
-#endif
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/include/fsphob.h b/src/vendorcode/intel/fsp1_0/baytrail/include/fsphob.h
deleted file mode 100644
index 04e2123b9b..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/include/fsphob.h
+++ /dev/null
@@ -1,542 +0,0 @@
-/**
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-#ifndef __PI_HOB_H__
-#define __PI_HOB_H__
-
-//
-// HobType of EFI_HOB_GENERIC_HEADER.
-//
-#define EFI_HOB_TYPE_MEMORY_ALLOCATION 0x0002
-#define EFI_HOB_TYPE_RESOURCE_DESCRIPTOR 0x0003
-#define EFI_HOB_TYPE_GUID_EXTENSION 0x0004
-#define EFI_HOB_TYPE_UNUSED 0xFFFE
-#define EFI_HOB_TYPE_END_OF_HOB_LIST 0xFFFF
-
-///
-/// Describes the format and size of the data inside the HOB.
-/// All HOBs must contain this generic HOB header.
-///
-typedef struct {
- ///
- /// Identifies the HOB data structure type.
- ///
- UINT16 HobType;
- ///
- /// The length in bytes of the HOB.
- ///
- UINT16 HobLength;
- ///
- /// This field must always be set to zero.
- ///
- UINT32 Reserved;
-} EFI_HOB_GENERIC_HEADER;
-
-///
-/// Enumeration of memory types introduced in UEFI.
-///
-typedef enum {
- ///
- /// Not used.
- ///
- EfiReservedMemoryType,
- ///
- /// The code portions of a loaded application.
- /// (Note that UEFI OS loaders are UEFI applications.)
- ///
- EfiLoaderCode,
- ///
- /// The data portions of a loaded application and the default data allocation
- /// type used by an application to allocate pool memory.
- ///
- EfiLoaderData,
- ///
- /// The code portions of a loaded Boot Services Driver.
- ///
- EfiBootServicesCode,
- ///
- /// The data portions of a loaded Boot Serves Driver, and the default data
- /// allocation type used by a Boot Services Driver to allocate pool memory.
- ///
- EfiBootServicesData,
- ///
- /// The code portions of a loaded Runtime Services Driver.
- ///
- EfiRuntimeServicesCode,
- ///
- /// The data portions of a loaded Runtime Services Driver and the default
- /// data allocation type used by a Runtime Services Driver to allocate pool memory.
- ///
- EfiRuntimeServicesData,
- ///
- /// Free (unallocated) memory.
- ///
- EfiConventionalMemory,
- ///
- /// Memory in which errors have been detected.
- ///
- EfiUnusableMemory,
- ///
- /// Memory that holds the ACPI tables.
- ///
- EfiACPIReclaimMemory,
- ///
- /// Address space reserved for use by the firmware.
- ///
- EfiACPIMemoryNVS,
- ///
- /// Used by system firmware to request that a memory-mapped IO region
- /// be mapped by the OS to a virtual address so it can be accessed by EFI runtime services.
- ///
- EfiMemoryMappedIO,
- ///
- /// System memory-mapped IO region that is used to translate memory
- /// cycles to IO cycles by the processor.
- ///
- EfiMemoryMappedIOPortSpace,
- ///
- /// Address space reserved by the firmware for code that is part of the processor.
- ///
- EfiPalCode,
- EfiMaxMemoryType
-} EFI_MEMORY_TYPE;
-
-///
-/// EFI_HOB_MEMORY_ALLOCATION_HEADER describes the
-/// various attributes of the logical memory allocation. The type field will be used for
-/// subsequent inclusion in the UEFI memory map.
-///
-typedef struct {
- ///
- /// A GUID that defines the memory allocation region's type and purpose, as well as
- /// other fields within the memory allocation HOB. This GUID is used to define the
- /// additional data within the HOB that may be present for the memory allocation HOB.
- /// Type EFI_GUID is defined in InstallProtocolInterface() in the UEFI 2.0
- /// specification.
- ///
- EFI_GUID Name;
-
- ///
- /// The base address of memory allocated by this HOB. Type
- /// EFI_PHYSICAL_ADDRESS is defined in AllocatePages() in the UEFI 2.0
- /// specification.
- ///
- EFI_PHYSICAL_ADDRESS MemoryBaseAddress;
-
- ///
- /// The length in bytes of memory allocated by this HOB.
- ///
- UINT64 MemoryLength;
-
- ///
- /// Defines the type of memory allocated by this HOB. The memory type definition
- /// follows the EFI_MEMORY_TYPE definition. Type EFI_MEMORY_TYPE is defined
- /// in AllocatePages() in the UEFI 2.0 specification.
- ///
- EFI_MEMORY_TYPE MemoryType;
-
- ///
- /// Padding for Itanium processor family
- ///
- UINT8 Reserved[4];
-} EFI_HOB_MEMORY_ALLOCATION_HEADER;
-
-///
-/// Describes all memory ranges used during the HOB producer
-/// phase that exist outside the HOB list. This HOB type
-/// describes how memory is used, not the physical attributes of memory.
-///
-typedef struct {
- ///
- /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_MEMORY_ALLOCATION.
- ///
- EFI_HOB_GENERIC_HEADER Header;
- ///
- /// An instance of the EFI_HOB_MEMORY_ALLOCATION_HEADER that describes the
- /// various attributes of the logical memory allocation.
- ///
- EFI_HOB_MEMORY_ALLOCATION_HEADER AllocDescriptor;
- //
- // Additional data pertaining to the "Name" Guid memory
- // may go here.
- //
-} EFI_HOB_MEMORY_ALLOCATION;
-
-///
-/// The resource type.
-///
-typedef UINT32 EFI_RESOURCE_TYPE;
-
-//
-// Value of ResourceType in EFI_HOB_RESOURCE_DESCRIPTOR.
-//
-#define EFI_RESOURCE_SYSTEM_MEMORY 0x00000000
-#define EFI_RESOURCE_MEMORY_MAPPED_IO 0x00000001
-#define EFI_RESOURCE_IO 0x00000002
-#define EFI_RESOURCE_FIRMWARE_DEVICE 0x00000003
-#define EFI_RESOURCE_MEMORY_MAPPED_IO_PORT 0x00000004
-#define EFI_RESOURCE_MEMORY_RESERVED 0x00000005
-#define EFI_RESOURCE_IO_RESERVED 0x00000006
-#define EFI_RESOURCE_MAX_MEMORY_TYPE 0x00000007
-
-///
-/// A type of recount attribute type.
-///
-typedef UINT32 EFI_RESOURCE_ATTRIBUTE_TYPE;
-
-//
-// These types can be ORed together as needed.
-//
-// The first three enumerations describe settings
-//
-#define EFI_RESOURCE_ATTRIBUTE_PRESENT 0x00000001
-#define EFI_RESOURCE_ATTRIBUTE_INITIALIZED 0x00000002
-#define EFI_RESOURCE_ATTRIBUTE_TESTED 0x00000004
-//
-// The rest of the settings describe capabilities
-//
-#define EFI_RESOURCE_ATTRIBUTE_SINGLE_BIT_ECC 0x00000008
-#define EFI_RESOURCE_ATTRIBUTE_MULTIPLE_BIT_ECC 0x00000010
-#define EFI_RESOURCE_ATTRIBUTE_ECC_RESERVED_1 0x00000020
-#define EFI_RESOURCE_ATTRIBUTE_ECC_RESERVED_2 0x00000040
-#define EFI_RESOURCE_ATTRIBUTE_READ_PROTECTED 0x00000080
-#define EFI_RESOURCE_ATTRIBUTE_WRITE_PROTECTED 0x00000100
-#define EFI_RESOURCE_ATTRIBUTE_EXECUTION_PROTECTED 0x00000200
-#define EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE 0x00000400
-#define EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE 0x00000800
-#define EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE 0x00001000
-#define EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE 0x00002000
-#define EFI_RESOURCE_ATTRIBUTE_16_BIT_IO 0x00004000
-#define EFI_RESOURCE_ATTRIBUTE_32_BIT_IO 0x00008000
-#define EFI_RESOURCE_ATTRIBUTE_64_BIT_IO 0x00010000
-#define EFI_RESOURCE_ATTRIBUTE_UNCACHED_EXPORTED 0x00020000
-
-///
-/// Describes the resource properties of all fixed,
-/// nonrelocatable resource ranges found on the processor
-/// host bus during the HOB producer phase.
-///
-typedef struct {
- ///
- /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_RESOURCE_DESCRIPTOR.
- ///
- EFI_HOB_GENERIC_HEADER Header;
- ///
- /// A GUID representing the owner of the resource. This GUID is used by HOB
- /// consumer phase components to correlate device ownership of a resource.
- ///
- EFI_GUID Owner;
- ///
- /// The resource type enumeration as defined by EFI_RESOURCE_TYPE.
- ///
- EFI_RESOURCE_TYPE ResourceType;
- ///
- /// Resource attributes as defined by EFI_RESOURCE_ATTRIBUTE_TYPE.
- ///
- EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttribute;
- ///
- /// The physical start address of the resource region.
- ///
- EFI_PHYSICAL_ADDRESS PhysicalStart;
- ///
- /// The number of bytes of the resource region.
- ///
- UINT64 ResourceLength;
-} EFI_HOB_RESOURCE_DESCRIPTOR;
-
-///
-/// Allows writers of executable content in the HOB producer phase to
-/// maintain and manage HOBs with specific GUID.
-///
-typedef struct {
- ///
- /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_GUID_EXTENSION.
- ///
- EFI_HOB_GENERIC_HEADER Header;
- ///
- /// A GUID that defines the contents of this HOB.
- ///
- EFI_GUID Name;
- //
- // Guid specific data goes here
- //
-} EFI_HOB_GUID_TYPE;
-
-///
-/// Union of all the possible HOB Types.
-///
-typedef union {
- EFI_HOB_GENERIC_HEADER *Header;
- EFI_HOB_MEMORY_ALLOCATION *MemoryAllocation;
- EFI_HOB_RESOURCE_DESCRIPTOR *ResourceDescriptor;
- EFI_HOB_GUID_TYPE *Guid;
- UINT8 *Raw;
-} EFI_PEI_HOB_POINTERS;
-
-
-/**
- Returns the type of a HOB.
-
- This macro returns the HobType field from the HOB header for the
- HOB specified by HobStart.
-
- @param HobStart A pointer to a HOB.
-
- @return HobType.
-
-**/
-#define GET_HOB_TYPE(HobStart) \
- (((EFI_HOB_GENERIC_HEADER *)(HobStart))->HobType)
-
-/**
- Returns the length, in bytes, of a HOB.
-
- This macro returns the HobLength field from the HOB header for the
- HOB specified by HobStart.
-
- @param HobStart A pointer to a HOB.
-
- @return HobLength.
-
-**/
-#define GET_HOB_LENGTH(HobStart) \
- (((EFI_HOB_GENERIC_HEADER *)(HobStart))->HobLength)
-
-/**
- Returns a pointer to the next HOB in the HOB list.
-
- This macro returns a pointer to HOB that follows the
- HOB specified by HobStart in the HOB List.
-
- @param HobStart A pointer to a HOB.
-
- @return A pointer to the next HOB in the HOB list.
-
-**/
-#define GET_NEXT_HOB(HobStart) \
- (VOID *)((UINT8 *)(HobStart) + GET_HOB_LENGTH(HobStart))
-
-/**
- Determines if a HOB is the last HOB in the HOB list.
-
- This macro determine if the HOB specified by HobStart is the
- last HOB in the HOB list. If HobStart is last HOB in the HOB list,
- then TRUE is returned. Otherwise, FALSE is returned.
-
- @param HobStart A pointer to a HOB.
-
- @retval TRUE The HOB specified by HobStart is the last HOB in the HOB list.
- @retval FALSE The HOB specified by HobStart is not the last HOB in the HOB list.
-
-**/
-#define END_OF_HOB_LIST(HobStart) (GET_HOB_TYPE(HobStart) == (UINT16)EFI_HOB_TYPE_END_OF_HOB_LIST)
-
-/**
- Returns a pointer to data buffer from a HOB of type EFI_HOB_TYPE_GUID_EXTENSION.
-
- This macro returns a pointer to the data buffer in a HOB specified by HobStart.
- HobStart is assumed to be a HOB of type EFI_HOB_TYPE_GUID_EXTENSION.
-
- @param GuidHob A pointer to a HOB.
-
- @return A pointer to the data buffer in a HOB.
-
-**/
-#define GET_GUID_HOB_DATA(HobStart) \
- (VOID *)((UINT8 *)(HobStart) + sizeof(EFI_HOB_GUID_TYPE))
-
-/**
- Returns the size of the data buffer from a HOB of type EFI_HOB_TYPE_GUID_EXTENSION.
-
- This macro returns the size, in bytes, of the data buffer in a HOB specified by HobStart.
- HobStart is assumed to be a HOB of type EFI_HOB_TYPE_GUID_EXTENSION.
-
- @param GuidHob A pointer to a HOB.
-
- @return The size of the data buffer.
-**/
-#define GET_GUID_HOB_DATA_SIZE(HobStart) \
- (UINT16)(GET_HOB_LENGTH(HobStart) - sizeof(EFI_HOB_GUID_TYPE))
-
-/**
- Returns the pointer to the HOB list.
-
- This function returns the pointer to first HOB in the list.
-
- If the pointer to the HOB list is NULL, then ASSERT().
-
- @return The pointer to the HOB list.
-
-**/
-VOID *
-EFIAPI
-GetHobList (
- VOID
- );
-
-/**
- Returns the next instance of a HOB type from the starting HOB.
-
- This function searches the first instance of a HOB type from the starting HOB pointer.
- If there does not exist such HOB type from the starting HOB pointer, it will return NULL.
- In contrast with macro GET_NEXT_HOB(), this function does not skip the starting HOB pointer
- unconditionally: it returns HobStart back if HobStart itself meets the requirement;
- caller is required to use GET_NEXT_HOB() if it wishes to skip current HobStart.
-
- If HobStart is NULL, then ASSERT().
-
- @param Type The HOB type to return.
- @param HobStart The starting HOB pointer to search from.
-
- @return The next instance of a HOB type from the starting HOB.
-
-**/
-VOID *
-EFIAPI
-GetNextHob (
- UINT16 Type,
- CONST VOID *HobStart
- );
-
-/**
- Returns the first instance of a HOB type among the whole HOB list.
-
- This function searches the first instance of a HOB type among the whole HOB list.
- If there does not exist such HOB type in the HOB list, it will return NULL.
-
- If the pointer to the HOB list is NULL, then ASSERT().
-
- @param Type The HOB type to return.
-
- @return The next instance of a HOB type from the starting HOB.
-
-**/
-VOID *
-EFIAPI
-GetFirstHob (
- UINT16 Type
- );
-
-/**
- Returns the next instance of the matched GUID HOB from the starting HOB.
-
- This function searches the first instance of a HOB from the starting HOB pointer.
- Such HOB should satisfy two conditions:
- its HOB type is EFI_HOB_TYPE_GUID_EXTENSION and its GUID Name equals to the input Guid.
- If there does not exist such HOB from the starting HOB pointer, it will return NULL.
- Caller is required to apply GET_GUID_HOB_DATA () and GET_GUID_HOB_DATA_SIZE ()
- to extract the data section and its size info respectively.
- In contrast with macro GET_NEXT_HOB(), this function does not skip the starting HOB pointer
- unconditionally: it returns HobStart back if HobStart itself meets the requirement;
- caller is required to use GET_NEXT_HOB() if it wishes to skip current HobStart.
-
- If Guid is NULL, then ASSERT().
- If HobStart is NULL, then ASSERT().
-
- @param Guid The GUID to match with in the HOB list.
- @param HobStart A pointer to a Guid.
-
- @return The next instance of the matched GUID HOB from the starting HOB.
-
-**/
-VOID *
-EFIAPI
-GetNextGuidHob (
- CONST EFI_GUID *Guid,
- CONST VOID *HobStart
- );
-
-/**
- Returns the first instance of the matched GUID HOB among the whole HOB list.
-
- This function searches the first instance of a HOB among the whole HOB list.
- Such HOB should satisfy two conditions:
- its HOB type is EFI_HOB_TYPE_GUID_EXTENSION and its GUID Name equals to the input Guid.
- If there does not exist such HOB from the starting HOB pointer, it will return NULL.
- Caller is required to apply GET_GUID_HOB_DATA () and GET_GUID_HOB_DATA_SIZE ()
- to extract the data section and its size info respectively.
-
- If the pointer to the HOB list is NULL, then ASSERT().
- If Guid is NULL, then ASSERT().
-
- @param Guid The GUID to match with in the HOB list.
-
- @return The first instance of the matched GUID HOB among the whole HOB list.
-
-**/
-VOID *
-EFIAPI
-GetFirstGuidHob (
- CONST EFI_GUID *Guid
- );
-
-/**
- Compares two GUIDs.
-
- This function compares Guid1 to Guid2. If the GUIDs are identical then TRUE is returned.
- If there are any bit differences in the two GUIDs, then FALSE is returned.
-
- If Guid1 is NULL, then ASSERT().
- If Guid2 is NULL, then ASSERT().
-
- @param Guid1 A pointer to a 128 bit GUID.
- @param Guid2 A pointer to a 128 bit GUID.
-
- @retval TRUE Guid1 and Guid2 are identical.
- @retval FALSE Guid1 and Guid2 are not identical.
-
-**/
-BOOLEAN
-EFIAPI
-CompareGuid (
- CONST EFI_GUID *Guid1,
- CONST EFI_GUID *Guid2
- );
-
-/**
- Reads a 64-bit value from memory that may be unaligned.
-
- This function returns the 64-bit value pointed to by Buffer. The function
- guarantees that the read operation does not produce an alignment fault.
-
- If the Buffer is NULL, then ASSERT().
-
- @param Buffer Pointer to a 64-bit value that may be unaligned.
-
- @return The 64-bit value read from Buffer.
-
-**/
-UINT64
-EFIAPI
-ReadUnaligned64 (
- CONST UINT64 *Buffer
- );
-
-#endif
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/include/fspinfoheader.h b/src/vendorcode/intel/fsp1_0/baytrail/include/fspinfoheader.h
deleted file mode 100644
index b277bcd5f7..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/include/fspinfoheader.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/**
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-#ifndef _FSP_INFO_HEADER_H_
-#define _FSP_INFO_HEADER_H_
-
-#pragma pack(1)
-
-typedef struct {
-
- UINT32 Signature; // Off 0x94
- UINT32 HeaderLength;
- UINT8 Reserved1[3];
- UINT8 HeaderRevision;
- UINT32 ImageRevision;
-
- CHAR8 ImageId[8]; // Off 0xA4
- UINT32 ImageSize;
- UINT32 ImageBase;
-
- UINT32 ImageAttribute; // Off 0xB4
- UINT32 CfgRegionOffset;
- UINT32 CfgRegionSize;
- UINT32 ApiEntryNum;
-
- UINT32 NemInitEntry; // Off 0xC4
- UINT32 FspInitEntry;
- UINT32 NotifyPhaseEntry;
- UINT32 Reserved2;
-
-} FSP_INFO_HEADER;
-
-#pragma pack()
-
-#endif
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/include/fspplatform.h b/src/vendorcode/intel/fsp1_0/baytrail/include/fspplatform.h
deleted file mode 100644
index 81f7b66a4a..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/include/fspplatform.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/**
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-#ifndef _FSP_PLATFORM_H_
-#define _FSP_PLATFORM_H_
-
-#include "fsptypes.h"
-#include "fspapi.h"
-#include "azalia.h"
-
-#pragma pack(1)
-
-typedef struct {
- FSP_INIT_RT_COMMON_BUFFER Common;
-} FSP_INIT_RT_BUFFER;
-
-#pragma pack()
-
-//
-// Function prototypes for board_fsp.c
-//
-void
-GetFspReservedMemoryFromGuid (
- uint32_t *FspMemoryBase,
- uint32_t *FspMemoryLength,
- EFI_GUID FspReservedMemoryGuid
- );
-
-void
-GetFspNVStorageMemory (
- void **FspNVStorageHob,
- uint16_t *DataSize
- );
-
-void
-GetTempRamStack (
- void **TempRamStackPtr,
- uint16_t *DataSize
- );
-
-void
-GetHighMemorySize (
- uint64_t *HighMemoryLength
- );
-
-void
-GetLowMemorySize (
- uint32_t *LowMemoryLength
- );
-
-#endif
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/include/fsptypes.h b/src/vendorcode/intel/fsp1_0/baytrail/include/fsptypes.h
deleted file mode 100644
index 4a313adc5d..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/include/fsptypes.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/**
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-/** \file fsptypes.h
- *
- *
- */
-
-#ifndef __FSP_TYPES_H__
-#define __FSP_TYPES_H__
-
-///
-/// 8-byte unsigned value.
-///
-typedef unsigned long long UINT64;
-///
-/// 8-byte signed value.
-///
-typedef long long INT64;
-///
-/// 4-byte unsigned value.
-///
-typedef unsigned int UINT32;
-///
-/// 4-byte signed value.
-///
-typedef int INT32;
-///
-/// 2-byte unsigned value.
-///
-typedef unsigned short UINT16;
-///
-/// 2-byte Character. Unless otherwise specified all strings are stored in the
-/// UTF-16 encoding format as defined by Unicode 2.1 and ISO/IEC 10646 standards.
-///
-typedef unsigned short CHAR16;
-///
-/// 2-byte signed value.
-///
-typedef short INT16;
-///
-/// Logical Boolean. 1-byte value containing 0 for FALSE or a 1 for TRUE. Other
-/// values are undefined.
-///
-typedef unsigned char BOOLEAN;
-///
-/// 1-byte unsigned value.
-///
-typedef unsigned char UINT8;
-///
-/// 1-byte Character
-///
-typedef char CHAR8;
-///
-/// 1-byte signed value
-///
-typedef char INT8;
-
-typedef void VOID;
-
-typedef UINT64 EFI_PHYSICAL_ADDRESS;
-
-typedef struct {
- UINT32 Data1;
- UINT16 Data2;
- UINT16 Data3;
- UINT8 Data4[8];
-} EFI_GUID;
-
-#define CONST const
-#define STATIC static
-
-#define TRUE ((BOOLEAN)(1==1))
-#define FALSE ((BOOLEAN)(0==1))
-
-#define FSPAPI __attribute__((cdecl))
-#define EFIAPI __attribute__((cdecl))
-
-#define ASSERT(Expression) \
- do { \
- if (!(Expression)) { \
- for (;;); \
- } \
- } while (FALSE)
-
-typedef UINT32 FSP_STATUS;
-typedef UINT32 EFI_STATUS;
-
-#endif
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/include/fspvpd.h b/src/vendorcode/intel/fsp1_0/baytrail/include/fspvpd.h
deleted file mode 100644
index 4bdcb79b72..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/include/fspvpd.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/**
-
-Copyright (C) 2013-2015 Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-#ifndef __FSPVPD_H__
-#define __FSPVPD_H__
-
-#pragma pack(1)
-
-typedef struct {
- UINT8 EnableMemoryDown;
- UINT8 DRAMSpeed; /* DRAM Speed */
- UINT8 DRAMType; /* DRAM Type */
- UINT8 DIMM0Enable; /* DIMM 0 Enable */
- UINT8 DIMM1Enable; /* DIMM 1 Enable */
- UINT8 DIMMDWidth; /* DRAM device data width */
- UINT8 DIMMDensity; /* DRAM device data density */
- UINT8 DIMMBusWidth; /* DIMM Bus Width */
- UINT8 DIMMSides; /* Ranks Per DIMM */
- UINT8 DIMMtCL; /* tCL */
- UINT8 DIMMtRPtRCD; /* tRP and tRCD in DRAM clk - 5:12.5ns, 6:15ns, etc. */
- UINT8 DIMMtWR; /* tWR in DRAM clk */
- UINT8 DIMMtWTR; /* tWTR in DRAM clk */
- UINT8 DIMMtRRD; /* tRRD in DRAM clk */
- UINT8 DIMMtRTP; /* tRTP in DRAM clk */
- UINT8 DIMMtFAW; /* tFAW in DRAM clk */
-} MEMORY_DOWN_DATA;
-
-
-typedef struct _UPD_DATA_REGION {
- UINT64 Signature; /* Offset 0x0000 */
- UINT32 RESERVED1; /* Offset 0x0008 */
- UINT8 Padding0[20]; /* Offset 0x000C */
- UINT16 PcdMrcInitTsegSize; /* Offset 0x0020 */
- UINT16 PcdMrcInitMmioSize; /* Offset 0x0022 */
- UINT8 PcdMrcInitSPDAddr1; /* Offset 0x0024 */
- UINT8 PcdMrcInitSPDAddr2; /* Offset 0x0025 */
- UINT8 PcdeMMCBootMode; /* Offset 0x0026 */
- UINT8 PcdEnableSdio; /* Offset 0x0027 */
- UINT8 PcdEnableSdcard; /* Offset 0x0028 */
- UINT8 PcdEnableHsuart0; /* Offset 0x0029 */
- UINT8 PcdEnableHsuart1; /* Offset 0x002A */
- UINT8 PcdEnableSpi; /* Offset 0x002B */
- UINT8 ReservedUpdSpace1; /* Offset 0x002C */
- UINT8 PcdEnableSata; /* Offset 0x002D */
- UINT8 PcdSataMode; /* Offset 0x002E */
- UINT8 PcdEnableAzalia; /* Offset 0x002F */
- UINT32 AzaliaConfigPtr; /* Offset 0x0030 */
- UINT8 PcdEnableXhci; /* Offset 0x0034 */
- UINT8 PcdEnableLpe; /* Offset 0x0035 */
- UINT8 PcdLpssSioEnablePciMode; /* Offset 0x0036 */
- UINT8 PcdEnableDma0; /* Offset 0x0037 */
- UINT8 PcdEnableDma1; /* Offset 0x0038 */
- UINT8 PcdEnableI2C0; /* Offset 0x0039 */
- UINT8 PcdEnableI2C1; /* Offset 0x003A */
- UINT8 PcdEnableI2C2; /* Offset 0x003B */
- UINT8 PcdEnableI2C3; /* Offset 0x003C */
- UINT8 PcdEnableI2C4; /* Offset 0x003D */
- UINT8 PcdEnableI2C5; /* Offset 0x003E */
- UINT8 PcdEnableI2C6; /* Offset 0x003F */
- UINT8 PcdEnablePwm0; /* Offset 0x0040 */
- UINT8 PcdEnablePwm1; /* Offset 0x0041 */
- UINT8 PcdEnableHsi; /* Offset 0x0042 */
- UINT8 PcdIgdDvmt50PreAlloc; /* Offset 0x0043 */
- UINT8 PcdApertureSize; /* Offset 0x0044 */
- UINT8 PcdGttSize; /* Offset 0x0045 */
- UINT32 SerialDebugPortAddress; /* Offset 0x0046 */
- UINT8 SerialDebugPortType; /* Offset 0x004A */
- UINT8 PcdMrcDebugMsg; /* Offset 0x004B */
- UINT8 ISPEnable; /* Offset 0x004C */
- UINT8 PcdSccEnablePciMode; /* Offset 0x004D */
- UINT8 IgdRenderStandby; /* Offset 0x004E */
- UINT8 TxeUmaEnable; /* Offset 0x004F */
- UINT8 PcdOsSelection; /* Offset 0x0050 */
- UINT8 PcdEMMC45DDR50Enabled; /* Offset 0x0051 */
- UINT8 PcdEMMC45HS200Enabled; /* Offset 0x0052 */
- UINT8 PcdEMMC45RetuneTimerValue; /* Offset 0x0053 */
- UINT8 PcdEnableIgd; /* Offset 0x0054 */
- UINT8 AutoSelfRefreshEnable; /* Offset 0x0055 */
- UINT16 APTaskTimeoutCnt; /* Offset 0x0056 */
- UINT8 UnusedUpdSpace1[152]; /* Offset 0x0058 */
- MEMORY_DOWN_DATA PcdMemoryParameters; /* Offset 0x00F0 */
- UINT16 PcdRegionTerminator; /* Offset 0x0100 */
-} UPD_DATA_REGION;
-
-
-typedef struct _VPD_DATA_REGION {
- UINT64 PcdVpdRegionSign; /* Offset 0x0000 */
- UINT32 PcdImageRevision; /* Offset 0x0008 */
- UINT32 PcdUpdRegionOffset; /* Offset 0x000C */
- UINT8 Padding0[16]; /* Offset 0x0010 */
- UINT32 PcdFspReservedMemoryLength; /* Offset 0x0020 */
- UINT8 PcdPlatformType; /* Offset 0x0024 */
- UINT8 PcdEnableSecureBoot; /* Offset 0x0025 */
- UINT8 PcdMemoryParameters[16]; /* Offset 0x0026 */
-} VPD_DATA_REGION;
-
-#pragma pack()
-
-#endif
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/srx/board_fsp.c b/src/vendorcode/intel/fsp1_0/baytrail/srx/board_fsp.c
deleted file mode 100644
index 85673ea2f7..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/srx/board_fsp.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/**
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-/***********************************************************************
- *
- * board_fsp.c
- *
- * Parse HOB to get system data.
- *
- **********************************************************************/
-#include "fsp.h"
-
-void
-GetLowMemorySize (
- uint32_t *LowMemoryLength
- )
-{
- EFI_PEI_HOB_POINTERS Hob;
-
- *LowMemoryLength = 0x100000;
-
- //
- // Get the HOB list for processing
- //
- Hob.Raw = GetHobList();
-
- //
- // Collect memory ranges
- //
- while (!END_OF_HOB_LIST(Hob.Raw)) {
- if (Hob.Header->HobType == EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) {
- if (Hob.ResourceDescriptor->ResourceType == EFI_RESOURCE_SYSTEM_MEMORY) {
- //
- // Need memory above 1MB to be collected here
- //
- if (Hob.ResourceDescriptor->PhysicalStart >= 0x100000 &&
- Hob.ResourceDescriptor->PhysicalStart < (EFI_PHYSICAL_ADDRESS) 0x100000000) {
- *LowMemoryLength += (uint32_t) (Hob.ResourceDescriptor->ResourceLength);
- }
- }
- }
- Hob.Raw = GET_NEXT_HOB(Hob.Raw);
- }
-
- return;
-}
-
-void
-GetHighMemorySize (
- uint64_t *HighMemoryLength
- )
-{
- EFI_PEI_HOB_POINTERS Hob;
-
- *HighMemoryLength = 0x0;
-
- //
- // Get the HOB list for processing
- //
- Hob.Raw = GetHobList();
-
- //
- // Collect memory ranges
- //
- while (!END_OF_HOB_LIST(Hob.Raw)) {
- if (Hob.Header->HobType == EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) {
- if (Hob.ResourceDescriptor->ResourceType == EFI_RESOURCE_SYSTEM_MEMORY) {
- //
- // Need memory above 4GB to be collected here
- //
- if (Hob.ResourceDescriptor->PhysicalStart >= (EFI_PHYSICAL_ADDRESS) 0x100000000) {
- *HighMemoryLength += (uint64_t) (Hob.ResourceDescriptor->ResourceLength);
- }
- }
- }
- Hob.Raw = GET_NEXT_HOB(Hob.Raw);
- }
-
- return;
-}
-
-void
-GetFspReservedMemoryFromGuid (
- uint32_t *FspMemoryBase,
- uint32_t *FspMemoryLength,
- EFI_GUID FspReservedMemoryGuid
- )
-{
- EFI_PEI_HOB_POINTERS Hob;
-
- //
- // Get the HOB list for processing
- //
- Hob.Raw = GetHobList();
- *FspMemoryBase = 0;
- *FspMemoryLength = 0;
-
- //
- // Collect memory ranges
- //
- while (!END_OF_HOB_LIST(Hob.Raw)) {
- if (Hob.Header->HobType == EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) {
- if (Hob.ResourceDescriptor->ResourceType == EFI_RESOURCE_MEMORY_RESERVED) {
- if (CompareGuid(&Hob.ResourceDescriptor->Owner, &FspReservedMemoryGuid)) {
- *FspMemoryBase = (uint32_t) (Hob.ResourceDescriptor->PhysicalStart);
- *FspMemoryLength = (uint32_t) (Hob.ResourceDescriptor->ResourceLength);
- break;
- }
- }
- }
- Hob.Raw = GET_NEXT_HOB(Hob.Raw);
- }
-
- return;
-}
-
-void
-GetFspNVStorageMemory (
- VOID **FspNVStorageHob,
- uint16_t *DataSize
- )
-{
-
- EFI_GUID FspNVStorageHobGuid = FSP_NON_VOLATILE_STORAGE_HOB_GUID;
- uint8_t *GuidHob;
- EFI_HOB_GENERIC_HEADER *GuidHobHdr;
-
- GuidHob = GetFirstGuidHob(&FspNVStorageHobGuid);
- if (!GuidHob) {
- *FspNVStorageHob = 0;
- *DataSize = 0;
- } else {
- *FspNVStorageHob = GET_GUID_HOB_DATA (GuidHob);
- GuidHobHdr = (EFI_HOB_GENERIC_HEADER *)GuidHob;
- *DataSize = GET_GUID_HOB_DATA_SIZE (GuidHobHdr);
- }
-}
-
-void
-GetTempRamStack (
- VOID **TempRamStackPtr,
- uint16_t *DataSize
- )
-{
-
- EFI_GUID FspBootloaderTemporaryMemoryHobGuid = FSP_BOOTLOADER_TEMPORARY_MEMORY_HOB_GUID;
- uint8_t *GuidHob;
- EFI_HOB_GENERIC_HEADER *GuidHobHdr;
-
- GuidHob = GetFirstGuidHob(&FspBootloaderTemporaryMemoryHobGuid);
- if (!GuidHob) {
- *TempRamStackPtr = 0;
- *DataSize = 0;
- } else {
- *TempRamStackPtr = GET_GUID_HOB_DATA (GuidHob);
- GuidHobHdr = (EFI_HOB_GENERIC_HEADER *)GuidHob;
- *DataSize = GET_GUID_HOB_DATA_SIZE (GuidHobHdr);
- }
-}
diff --git a/src/vendorcode/intel/fsp1_0/baytrail/srx/fsphob.c b/src/vendorcode/intel/fsp1_0/baytrail/srx/fsphob.c
deleted file mode 100644
index 018682e418..0000000000
--- a/src/vendorcode/intel/fsp1_0/baytrail/srx/fsphob.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/**
-
-Copyright (C) 2013, Intel Corporation
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
-**/
-
-/***********************************************************************
- *
- * fsphob.c
- *
- * HOB infrastructure code.
- *
- **********************************************************************/
-#include <string.h>
-
-#include "fsptypes.h"
-#include "fsphob.h"
-
-//
-// Pointer to the HOB should be initialized with the output of FSP INIT PARAMS
-//
-extern volatile void *FspHobListPtr;
-
-/**
- Reads a 64-bit value from memory that may be unaligned.
-
- This function returns the 64-bit value pointed to by Buffer. The function
- guarantees that the read operation does not produce an alignment fault.
-
- If the Buffer is NULL, then ASSERT().
-
- @param Buffer Pointer to a 64-bit value that may be unaligned.
-
- @return The 64-bit value read from Buffer.
-
-**/
-UINT64
-EFIAPI
-ReadUnaligned64 (
- CONST UINT64 *Buffer
- )
-{
- ASSERT (Buffer != NULL);
-
- return *Buffer;
-}
-
-/**
- Compares two GUIDs.
-
- This function compares Guid1 to Guid2. If the GUIDs are identical then TRUE is returned.
- If there are any bit differences in the two GUIDs, then FALSE is returned.
-
- If Guid1 is NULL, then ASSERT().
- If Guid2 is NULL, then ASSERT().
-
- @param Guid1 A pointer to a 128 bit GUID.
- @param Guid2 A pointer to a 128 bit GUID.
-
- @retval TRUE Guid1 and Guid2 are identical.
- @retval FALSE Guid1 and Guid2 are not identical.
-
-**/
-BOOLEAN
-EFIAPI
-CompareGuid (
- CONST EFI_GUID *Guid1,
- CONST EFI_GUID *Guid2
- )
-{
- UINT64 LowPartOfGuid1;
- UINT64 LowPartOfGuid2;
- UINT64 HighPartOfGuid1;
- UINT64 HighPartOfGuid2;
-
- LowPartOfGuid1 = ReadUnaligned64 ((CONST UINT64*) Guid1);
- LowPartOfGuid2 = ReadUnaligned64 ((CONST UINT64*) Guid2);
- HighPartOfGuid1 = ReadUnaligned64 ((CONST UINT64*) Guid1 + 1);
- HighPartOfGuid2 = ReadUnaligned64 ((CONST UINT64*) Guid2 + 1);
-
- return (BOOLEAN) (LowPartOfGuid1 == LowPartOfGuid2 && HighPartOfGuid1 == HighPartOfGuid2);
-}
-
-/**
- Returns the pointer to the HOB list.
-**/
-VOID *
-EFIAPI
-GetHobList (
- VOID
- )
-{
- ASSERT (FspHobListPtr != NULL);
- return ((VOID *)FspHobListPtr);
-}
-
-/**
- Returns the next instance of a HOB type from the starting HOB.
-**/
-VOID *
-EFIAPI
-GetNextHob (
- UINT16 Type,
- CONST VOID *HobStart
- )
-{
- EFI_PEI_HOB_POINTERS Hob;
-
- ASSERT (HobStart != NULL);
-
- Hob.Raw = (UINT8 *) HobStart;
- //
- // Parse the HOB list until end of list or matching type is found.
- //
- while (!END_OF_HOB_LIST(Hob.Raw)) {
- if (Hob.Header->HobType == Type) {
- return Hob.Raw;
- }
- Hob.Raw = GET_NEXT_HOB(Hob.Raw);
- }
- return NULL;
-}
-
-/**
- Returns the first instance of a HOB type among the whole HOB list.
-**/
-VOID *
-EFIAPI
-GetFirstHob (
- UINT16 Type
- )
-{
- VOID *HobList;
-
- HobList = GetHobList ();
- return GetNextHob (Type, HobList);
-}
-
-/**
- Returns the next instance of the matched GUID HOB from the starting HOB.
-**/
-VOID *
-EFIAPI
-GetNextGuidHob (
- CONST EFI_GUID *Guid,
- CONST VOID *HobStart
- )
-{
- EFI_PEI_HOB_POINTERS GuidHob;
-
- GuidHob.Raw = (UINT8 *) HobStart;
- while ((GuidHob.Raw = GetNextHob (EFI_HOB_TYPE_GUID_EXTENSION, GuidHob.Raw)) != NULL) {
- if (CompareGuid (Guid, &GuidHob.Guid->Name)) {
- break;
- }
- GuidHob.Raw = GET_NEXT_HOB(GuidHob.Raw);
- }
- return GuidHob.Raw;
-}
-
-/**
- Returns the first instance of the matched GUID HOB among the whole HOB list.
-**/
-VOID *
-EFIAPI
-GetFirstGuidHob (
- CONST EFI_GUID *Guid
- )
-{
- VOID *HobList;
-
- HobList = GetHobList ();
- return GetNextGuidHob (Guid, HobList);
-}