summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/southbridge/intel/common/smi.c20
-rw-r--r--src/southbridge/intel/common/smihandler.c53
2 files changed, 27 insertions, 46 deletions
diff --git a/src/southbridge/intel/common/smi.c b/src/southbridge/intel/common/smi.c
index deaecb2625..d8e6d43a18 100644
--- a/src/southbridge/intel/common/smi.c
+++ b/src/southbridge/intel/common/smi.c
@@ -23,16 +23,15 @@
#include <cpu/x86/cache.h>
#include <cpu/x86/smm.h>
#include <cpu/intel/smm/gen1/smi.h>
+#include <southbridge/intel/common/pmbase.h>
#include "pmutil.h"
#define DEBUG_PERIODIC_SMIS 0
-static u16 pmbase;
-
u16 get_pmbase(void)
{
- return pmbase;
+ return lpc_get_pmbase();
}
void southbridge_smm_init(void)
@@ -48,12 +47,9 @@ void southbridge_smm_init(void)
printk(BIOS_DEBUG, "Initializing southbridge SMI...");
- pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
- D31F0_PMBASE) & 0xff80;
-
- printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
+ printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", lpc_get_pmbase());
- smi_en = inl(pmbase + SMI_EN);
+ smi_en = read_pmbase32(SMI_EN);
if (smi_en & APMC_EN) {
printk(BIOS_INFO, "SMI# handler already enabled?\n");
return;
@@ -67,14 +63,14 @@ void southbridge_smm_init(void)
dump_tco_status(reset_tco_status());
/* Disable GPE0 PME_B0 */
- gpe0_en = inl(pmbase + GPE0_EN);
+ gpe0_en = read_pmbase32(GPE0_EN);
gpe0_en &= ~PME_B0_EN;
- outl(gpe0_en, pmbase + GPE0_EN);
+ write_pmbase32(GPE0_EN, gpe0_en);
pm1_en = 0;
pm1_en |= PWRBTN_EN;
pm1_en |= GBL_EN;
- outw(pm1_en, pmbase + PM1_EN);
+ write_pmbase16(PM1_EN, pm1_en);
/* Enable SMI generation:
* - on TCO events
@@ -106,7 +102,7 @@ void southbridge_smm_init(void)
/* The following need to be on for SMIs to happen */
smi_en |= EOS | GBL_SMI_EN;
- outl(smi_en, pmbase + SMI_EN);
+ write_pmbase32(SMI_EN, smi_en);
}
void southbridge_trigger_smi(void)
diff --git a/src/southbridge/intel/common/smihandler.c b/src/southbridge/intel/common/smihandler.c
index 65a1b96872..fb2fe59bd1 100644
--- a/src/southbridge/intel/common/smihandler.c
+++ b/src/southbridge/intel/common/smihandler.c
@@ -25,21 +25,21 @@
#include <elog.h>
#include <halt.h>
#include <pc80/mc146818rtc.h>
+#include <southbridge/intel/common/pmbase.h>
+
#include "pmutil.h"
static int smm_initialized = 0;
-static u16 pmbase;
-
u16 get_pmbase(void)
{
- return pmbase;
+ return lpc_get_pmbase();
}
/* Defined in <cpu/x86/smm.h> which is used outside of common code*/
u16 smm_get_pmbase(void)
{
- return get_pmbase();
+ return lpc_get_pmbase();
}
void gpi_route_interrupt(u8 gpi, u8 mode)
@@ -67,11 +67,7 @@ void gpi_route_interrupt(u8 gpi, u8 mode)
*/
void southbridge_smi_set_eos(void)
{
- u8 reg8;
-
- reg8 = inb(pmbase + SMI_EN);
- reg8 |= EOS;
- outb(reg8, pmbase + SMI_EN);
+ write_pmbase8(SMI_EN, read_pmbase8(SMI_EN) | EOS);
}
static void busmaster_disable_on_bus(int bus)
@@ -134,12 +130,10 @@ static void southbridge_smi_sleep(void)
outb(tmp72, 0x72);
/* First, disable further SMIs */
- reg8 = inb(pmbase + SMI_EN);
- reg8 &= ~SLP_SMI_EN;
- outb(reg8, pmbase + SMI_EN);
+ write_pmbase8(SMI_EN, read_pmbase8(SMI_EN) & ~SLP_SMI_EN);
/* Figure out SLP_TYP */
- reg32 = inl(pmbase + PM1_CNT);
+ reg32 = read_pmbase32(PM1_CNT);
printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32);
slp_typ = acpi_sleep_from_pm1(reg32);
@@ -179,7 +173,7 @@ static void southbridge_smi_sleep(void)
case ACPI_S5:
printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
- outl(0, pmbase + GPE0_EN);
+ write_pmbase32(GPE0_EN, 0);
/* Always set the flag in case CMOS was changed on runtime. For
* "KEEP", switch to "OFF" - KEEP is software emulated
@@ -202,7 +196,7 @@ static void southbridge_smi_sleep(void)
* event again. We need to set BIT13 (SLP_EN) though to make the
* sleep happen.
*/
- outl(reg32 | SLP_EN, pmbase + PM1_CNT);
+ write_pmbase32(PM1_CNT, reg32 | SLP_EN);
/* Make sure to stop executing code here for S3/S4/S5 */
if (slp_typ >= ACPI_S3)
@@ -212,11 +206,11 @@ static void southbridge_smi_sleep(void)
* the line above. However, if we entered sleep state S1 and wake
* up again, we will continue to execute code in this function.
*/
- reg32 = inl(pmbase + PM1_CNT);
+ reg32 = read_pmbase32(PM1_CNT);
if (reg32 & SCI_EN) {
/* The OS is not an ACPI OS, so we set the state to S0 */
reg32 &= ~(SLP_EN | SLP_TYP);
- outl(reg32, pmbase + PM1_CNT);
+ write_pmbase32(PM1_CNT, reg32);
}
}
@@ -283,7 +277,6 @@ static int mainboard_finalized = 0;
static void southbridge_smi_apmc(void)
{
- u32 pmctrl;
u8 reg8;
/* Emulate B2 register as the FADT / Linux expects it */
@@ -305,15 +298,11 @@ static void southbridge_smi_apmc(void)
printk(BIOS_DEBUG, "P-state control\n");
break;
case APM_CNT_ACPI_DISABLE:
- pmctrl = inl(pmbase + PM1_CNT);
- pmctrl &= ~SCI_EN;
- outl(pmctrl, pmbase + PM1_CNT);
+ write_pmbase32(PM1_CNT, read_pmbase32(PM1_CNT) & ~SCI_EN);
printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
break;
case APM_CNT_ACPI_ENABLE:
- pmctrl = inl(pmbase + PM1_CNT);
- pmctrl |= SCI_EN;
- outl(pmctrl, pmbase + PM1_CNT);
+ write_pmbase32(PM1_CNT, read_pmbase32(PM1_CNT) | SCI_EN);
printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
break;
case APM_CNT_GNVS_UPDATE:
@@ -360,7 +349,7 @@ static void southbridge_smi_pm1(void)
#if IS_ENABLED(CONFIG_ELOG_GSMI)
elog_add_event(ELOG_TYPE_POWER_BUTTON);
#endif
- outl(reg32, pmbase + PM1_CNT);
+ write_pmbase32(PM1_CNT, reg32);
}
}
@@ -375,24 +364,23 @@ static void southbridge_smi_gpe0(void)
static void southbridge_smi_gpi(void)
{
u16 reg16;
- reg16 = inw(pmbase + ALT_GP_SMI_STS);
- outw(reg16, pmbase + ALT_GP_SMI_STS);
- reg16 &= inw(pmbase + ALT_GP_SMI_EN);
+ reg16 = reset_alt_gp_smi_status();
+ reg16 &= read_pmbase16(ALT_GP_SMI_EN);
mainboard_smi_gpi(reg16);
if (reg16)
printk(BIOS_DEBUG, "GPI (mask %04x)\n", reg16);
- outw(reg16, pmbase + ALT_GP_SMI_STS);
+ write_pmbase16(ALT_GP_SMI_STS, reg16);
}
static void southbridge_smi_mc(void)
{
u32 reg32;
- reg32 = inl(pmbase + SMI_EN);
+ reg32 = read_pmbase32(SMI_EN);
/* Are periodic SMIs enabled? */
if ((reg32 & MCSMI_EN) == 0)
@@ -445,7 +433,7 @@ static void southbridge_smi_periodic(void)
{
u32 reg32;
- reg32 = inl(pmbase + SMI_EN);
+ reg32 = read_pmbase32(SMI_EN);
/* Are periodic SMIs enabled? */
if ((reg32 & PERIODIC_EN) == 0)
@@ -501,9 +489,6 @@ void southbridge_smi_handler(void)
int i, dump = 0;
u32 smi_sts;
- /* Update global variable pmbase */
- pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc;
-
/* We need to clear the SMI status registers, or we won't see what's
* happening in the following calls.
*/