14 files changed, 318 insertions, 0 deletions
diff --git a/Documentation/mainboard/emulation/qemu-aarch64.md b/Documentation/mainboard/emulation/qemu-aarch64.md
new file mode 100644
index 0000000000..ee4c9e7a3b
--- /dev/null
+++ b/Documentation/mainboard/emulation/qemu-aarch64.md
@@ -0,0 +1,47 @@
+# QEMU AArch64 emulator
+This page discribes how to build and run coreboot for QEMU/AArch64.
+You can use LinuxBoot via `make menuconfig` or an arbitrary FIT image
+as a payload for QEMU/AArch64.
+
+## Running coreboot in QEMU
+```bash
+qemu-system-aarch64 -bios ./build/coreboot.rom \
+    -M virt,secure=on,virtualization=on -cpu cortex-a53 \
+    -nographic -m 8912M
+```
+
+- The default CPU in QEMU for AArch64 is a cortex-a15 which is 32-bit
+ARM CPU. You need to specify 64-bit ARM CPU via `-cpu cortex-a53`.
+- The default privilege level in QEMU for AArch64 is EL1 that we can't
+have the right to access EL3/EL2 registers. You need to enable EL3/EL2
+via `-machine secure=on,virtualization=on`.
+- You need to specify the size of memory more than 544 MiB because 512
+MiB is reserved for the kernel.
+
+## Building coreboot with an arbitrary FIT payload
+There are 3 steps to make coreboot.rom for QEMU/AArch64. If you select
+LinuxBoot, step 2 and 3 have done by LinuxBoot.
+1. Get a DTB (Device Tree Blob)
+2. Build a FIT image with a DTB
+3. Add a FIT image to coreboot.rom
+
+### 1. Get a DTB
+You can get the DTB from QEMU with the following command.
+```
+$ qemu-system-aarch64 \
+    -M virt,dumpdtb=virt.dtb,secure=on,virtualization=on \
+    -cpu cortex-a53 -nographic -m 2048M
+```
+
+### 2. Build a FIT image with a DTB
+You need to write an image source file that has an `.its` extension to
+configure kernels, ramdisks, and DTBs.
+See [Flattened uImage Tree documentation](../../lib/payloads/fit.md) for more details.
+
+### 3. Add a FIT image to coreboot.rom
+You can use cbfstool to add the payload you created in step 2 to
+the coreboot.rom.
+```
+$ ./build/cbfstool ./build/coreboot.rom add -f <path-to-a-payload>/uImage \
+    -n fallback/payload -t fit -c lzma
+```
diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md
index 8c3f6eae12..0f3105f85b 100644
--- a/Documentation/mainboard/index.md
+++ b/Documentation/mainboard/index.md
@@ -24,6 +24,7 @@ The boards in this section are not real mainboards, but emulators.
 
 - [Spike RISC-V emulator](emulation/spike-riscv.md)
 - [Qemu RISC-V emulator](emulation/qemu-riscv.md)
+- [Qemu AArch64 emulator](emulation/qemu-aarch64.md)
 
 ## Intel
 
diff --git a/src/mainboard/emulation/qemu-aarch64/Kconfig b/src/mainboard/emulation/qemu-aarch64/Kconfig
new file mode 100644
index 0000000000..7d8d7b2f00
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/Kconfig
@@ -0,0 +1,51 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2019 Asami Doi <d0iasm.pub@gmail.com>.
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# Emulation for QEMU 2.8 ARM Virtual Machine (alias of virt-2.8)
+# https://wiki.qemu.org/Documentation/Platforms/ARM
+
+if BOARD_EMULATION_QEMU_AARCH64
+
+config BOARD_SPECIFIC_OPTIONS
+	def_bool y
+	select ARCH_BOOTBLOCK_ARMV8_64
+	select ARCH_VERSTAGE_ARMV8_64
+	select ARCH_ROMSTAGE_ARMV8_64
+	select ARCH_RAMSTAGE_ARMV8_64
+	select ARM64_USE_ARCH_TIMER
+	select BOARD_ROMSIZE_KB_4096
+	select BOOTBLOCK_CONSOLE
+	select BOOTBLOCK_CUSTOM
+	select BOOT_DEVICE_NOT_SPI_FLASH
+	select CONSOLE_SERIAL
+	select DRIVERS_UART_PL011
+	select HAVE_LINEAR_FRAMEBUFFER
+	select MAINBOARD_FORCE_NATIVE_VGA_INIT
+	select MAINBOARD_HAS_NATIVE_VGA_INIT
+	select MISSING_BOARD_RESET
+
+config MAINBOARD_DIR
+	string
+	default emulation/qemu-aarch64
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "QEMU AArch64"
+
+config MAX_CPUS
+	int
+	default 2
+
+config MAINBOARD_VENDOR
+	string
+	default "QEMU"
+
+config DRAM_SIZE_MB
+	int
+	default 1024
+
+endif #  BOARD_EMULATION_QEMU_AARCH64
diff --git a/src/mainboard/emulation/qemu-aarch64/Kconfig.name b/src/mainboard/emulation/qemu-aarch64/Kconfig.name
new file mode 100644
index 0000000000..8c14fc1907
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/Kconfig.name
@@ -0,0 +1,5 @@
+config BOARD_EMULATION_QEMU_AARCH64
+	bool "QEMU AArch64 (virt)"
+	help
+	  To execute, do:
+	  qemu-system-aarch64 -bios ./build/coreboot.rom -M virt,secure=on,virtualization=on -cpu cortex-a53 -nographic -m 8192M
diff --git a/src/mainboard/emulation/qemu-aarch64/Makefile.inc b/src/mainboard/emulation/qemu-aarch64/Makefile.inc
new file mode 100644
index 0000000000..38ecdd1a7b
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/Makefile.inc
@@ -0,0 +1,25 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2019 Asami Doi <d0iasm.pub@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+romstage-y += cbmem.c
+ramstage-y += cbmem.c
+
+bootblock-y += media.c
+romstage-y += media.c
+ramstage-y += media.c
+
+bootblock-y += mmio.c
+romstage-y += mmio.c
+ramstage-y += mmio.c
+
+bootblock-y += memlayout.ld
+romstage-y += memlayout.ld
+ramstage-y += memlayout.ld
+
+bootblock-y += bootblock_custom.S
+
+CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/include
diff --git a/src/mainboard/emulation/qemu-aarch64/board_info.txt b/src/mainboard/emulation/qemu-aarch64/board_info.txt
new file mode 100644
index 0000000000..92fafa5c8f
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/board_info.txt
@@ -0,0 +1,3 @@
+Board name: QEMU AArch64 (virt)
+Category: emulation
+Board URL: http://wiki.qemu.org/Main_Page
diff --git a/src/mainboard/emulation/qemu-aarch64/bootblock_custom.S b/src/mainboard/emulation/qemu-aarch64/bootblock_custom.S
new file mode 100644
index 0000000000..f9e85d0efc
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/bootblock_custom.S
@@ -0,0 +1,36 @@
+/*
+ * Early initialization code for aarch64 (a.k.a. armv8)
+ *
+ * Copyright 2019 Asami Doi <d0iasm.pub@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include <arch/asm.h>
+
+ENTRY(_start)
+	/* Setup CPU. */
+	bl      arm64_init_cpu
+
+	/* Get code positions. */
+	ldr	x1, =_flash
+	ldr	x0, =_bootblock
+
+	/* Calculate bootblock size. */
+	ldr     x2, =_ebootblock
+	sub     x2, x2, x0
+
+	/* Call memcpy in arch/arm64/memcpy.S */
+	bl	memcpy
+	dmb     sy
+
+	/* Calculate relocation offset between bootblock in flash and in DRAM. */
+ 	ldr	x0, =_flash
+	ldr	x1, =_bootblock
+	sub	x1, x1, x0
+
+	/* Jump to main() in DRAM. */
+	adr	x0, main
+	add	x0, x0, x1
+	blr	x0
+ENDPROC(_start)
diff --git a/src/mainboard/emulation/qemu-aarch64/cbmem.c b/src/mainboard/emulation/qemu-aarch64/cbmem.c
new file mode 100644
index 0000000000..c50254df29
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/cbmem.c
@@ -0,0 +1,16 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Asami Doi <d0iasm.pub@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include <cbmem.h>
+#include <ramdetect.h>
+#include <symbols.h>
+
+void *cbmem_top(void)
+{
+	return _dram + (probe_ramsize((uintptr_t)_dram, CONFIG_DRAM_SIZE_MB) * MiB);
+}
diff --git a/src/mainboard/emulation/qemu-aarch64/devicetree.cb b/src/mainboard/emulation/qemu-aarch64/devicetree.cb
new file mode 100644
index 0000000000..010cae8e91
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/devicetree.cb
@@ -0,0 +1,11 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2019 Asami Doi <d0iasm.pub@gmail.com>.
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# This file exists only to avoid a compile error. It needs a devicetree.cb that is not empty.
+chip drivers/generic/generic # I2C0 controller
+	device i2c 6 on end # Fake component for testing
+end
diff --git a/src/mainboard/emulation/qemu-aarch64/include/mainboard/addressmap.h b/src/mainboard/emulation/qemu-aarch64/include/mainboard/addressmap.h
new file mode 100644
index 0000000000..6f0c80257b
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/include/mainboard/addressmap.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2019 Asami Doi <d0iasm.pub@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+/*
+ * Memory map for QEMU virt machine since
+ * a578cdfbdd8f9beff5ced52b7826ddb1669abbbf (June 2019):
+ *
+ * 0..128MiB (0x0000_0000..0x0080_0000) is the space for a flash device.
+ * 128MiB..256MiB (0x0080_0000..0x0100_0000) is used for miscellaneous device I/O.
+ * 256MiB..1GiB (0x0100_0000..0x4000_0000) is reserved for possible future PCI support.
+ * 1GiB.. (0x4000_0000) is RAM and the size depends on initial RAM and device memory settings
+ *
+ * 0x0000_0000..0x0080_0000: Flash memory
+ * 0x0900_0000..0x0900_1000: UART (PL011)
+ * 0x0901_0000..0x0901_1000: RTC (PL031)
+ * 0x0903_0000..0x0903_1000: GPIO (PL061)
+ * 0x0904_0000..0x0904_1000: Secure UART (PL011)
+ * 0x0905_0000..0x0907_0000: SMMU (smmu-v3)
+ * 0x0a00_0000..0x0a00_0200: MMIO (virtio)
+ * 0x0c00_0000..0x0e00_0000: Platform bus
+ * 0x4000_0000..: RAM
+ */
+#define VIRT_UART_BASE 0x09000000
+#define VIRT_RTC_BASE 0x09010000
+#define VIRT_GPIO_BASE 0x09030000
+#define VIRT_SECURE_UART_BASE 0x09040000
+#define VIRT_SMMU_BASE 0x09050000
+#define VIRT_MMIO_BASE 0x0a000000
+#define VIRT_PLATFORM_BUS_BASE 0x0c000000
diff --git a/src/mainboard/emulation/qemu-aarch64/mainboard.c b/src/mainboard/emulation/qemu-aarch64/mainboard.c
new file mode 100644
index 0000000000..573545532a
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/mainboard.c
@@ -0,0 +1,23 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Asami Doi <d0iasm.pub@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include <cbmem.h>
+#include <ramdetect.h>
+#include <symbols.h>
+#include <device/device.h>
+
+static void mainboard_enable(struct device *dev)
+{
+	int ram_size_mb = probe_ramsize((uintptr_t)_dram, CONFIG_DRAM_SIZE_MB);
+	ram_resource(dev, 0, (uintptr_t)_dram / KiB, ram_size_mb * KiB);
+}
+
+struct chip_operations mainboard_ops = {
+	.name = "qemu_aarch64",
+	.enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/emulation/qemu-aarch64/media.c b/src/mainboard/emulation/qemu-aarch64/media.c
new file mode 100644
index 0000000000..03f0eb1bf8
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/media.c
@@ -0,0 +1,18 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Asami Doi <d0iasm.pub@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include <boot_device.h>
+
+/* Maps directly to NOR flash up to ROM size. */
+static const struct mem_region_device boot_dev =
+	MEM_REGION_DEV_RO_INIT((void *)0x0, CONFIG_ROM_SIZE);
+
+const struct region_device *boot_device_ro(void)
+{
+	return &boot_dev.rdev;
+}
diff --git a/src/mainboard/emulation/qemu-aarch64/memlayout.ld b/src/mainboard/emulation/qemu-aarch64/memlayout.ld
new file mode 100644
index 0000000000..0b52d31052
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/memlayout.ld
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2019 Asami Doi <d0iasm.pub@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include <memlayout.h>
+#include <arch/header.ld>
+
+/*
+ * Memory map for QEMU virt machine since
+ * a578cdfbdd8f9beff5ced52b7826ddb1669abbbf (June 2019):
+ *
+ * 0..128MiB (0x0000_0000..0x0080_0000) is the space for a flash device.
+ * 128MiB..256MiB (0x0080_0000..0x0100_0000) is used for miscellaneous device I/O.
+ * 256MiB..1GiB (0x0100_0000..0x4000_0000) is reserved for possible future PCI support.
+ * 1GiB.. (0x4000_0000) is RAM and the size depends on initial RAM and device memory settings.
+ */
+SECTIONS
+{
+	REGION(flash, 0x00000000, CONFIG_ROM_SIZE, 8)
+
+	DRAM_START(0x40000000)
+	BOOTBLOCK(0x60010000, 64K)
+	STACK(0x60020000, 64K)
+	ROMSTAGE(0x60030000, 128K)
+	RAMSTAGE(0x60070000, 16M)
+
+	TTB(0x61100000, 16K)
+	POSTRAM_CBFS_CACHE(0x61110000, 1M)
+}
diff --git a/src/mainboard/emulation/qemu-aarch64/mmio.c b/src/mainboard/emulation/qemu-aarch64/mmio.c
new file mode 100644
index 0000000000..717d8581d2
--- /dev/null
+++ b/src/mainboard/emulation/qemu-aarch64/mmio.c
@@ -0,0 +1,15 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Asami Doi <d0iasm.pub@gmail.com>.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include <console/uart.h>
+#include <mainboard/addressmap.h>
+
+uintptr_t uart_platform_base(int idx)
+{
+	return VIRT_UART_BASE;
+}