summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h86
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h143
2 files changed, 116 insertions, 113 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h
index cce959cb15..4018ed0c68 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -74,18 +74,20 @@ typedef struct {
**/
UINT32 MemorySpdPtr00;
-/** Offset 0x0050 - Reserved
+/** Offset 0x0050 - Memory SPD Pointer Channel 0 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
**/
- UINT8 Reserved2[4];
+ UINT32 MemorySpdPtr01;
/** Offset 0x0054 - Memory SPD Pointer Channel 1 Dimm 0
Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
**/
UINT32 MemorySpdPtr10;
-/** Offset 0x0058 - Reserved
+/** Offset 0x0058 - Memory SPD Pointer Channel 1 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
**/
- UINT8 Reserved3[4];
+ UINT32 MemorySpdPtr11;
/** Offset 0x005C - Dq Byte Map CH0
Dq byte mapping between CPU and DRAM, Channel 0: board-dependent
@@ -132,7 +134,7 @@ typedef struct {
/** Offset 0x0096 - Reserved
**/
- UINT8 Reserved4[6];
+ UINT8 Reserved2[6];
/** Offset 0x009C - Intel Enhanced Debug
Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied
@@ -148,7 +150,7 @@ typedef struct {
/** Offset 0x00A4 - Reserved
**/
- UINT8 Reserved5[6];
+ UINT8 Reserved3[6];
/** Offset 0x00AA - Enable SMBus
Enable/disable SMBus controller.
@@ -175,7 +177,7 @@ typedef struct {
/** Offset 0x00B0 - Reserved
**/
- UINT8 Reserved6[2];
+ UINT8 Reserved4[2];
/** Offset 0x00B2 - Enable DCI ModPHY Pwoer Gate
Enable ModPHY Pwoer Gate when DCI is enabled
@@ -185,7 +187,7 @@ typedef struct {
/** Offset 0x00B3 - Reserved
**/
- UINT8 Reserved7;
+ UINT8 Reserved5;
/** Offset 0x00B4 - PCH Trace Hub Mode
Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
@@ -196,7 +198,7 @@ typedef struct {
/** Offset 0x00B5 - Reserved
**/
- UINT8 Reserved8[47];
+ UINT8 Reserved6[47];
/** Offset 0x00E4 - Disable VT-d
0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
@@ -206,7 +208,7 @@ typedef struct {
/** Offset 0x00E5 - Reserved
**/
- UINT8 Reserved9[3];
+ UINT8 Reserved7[3];
/** Offset 0x00E8 - Internal Graphics Pre-allocated Memory
Size of memory preallocated for internal graphics.
@@ -224,7 +226,7 @@ typedef struct {
/** Offset 0x00EA - Reserved
**/
- UINT8 Reserved10;
+ UINT8 Reserved8;
/** Offset 0x00EB - Board Type
MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile
@@ -235,7 +237,7 @@ typedef struct {
/** Offset 0x00EC - Reserved
**/
- UINT8 Reserved11[2];
+ UINT8 Reserved9[2];
/** Offset 0x00EE - SA GV
System Agent dynamic frequency support and when enabled memory will be training
@@ -246,7 +248,7 @@ typedef struct {
/** Offset 0x00EF - Reserved
**/
- UINT8 Reserved12[5];
+ UINT8 Reserved10[5];
/** Offset 0x00F4 - Rank Margin Tool
Enable/disable Rank Margin Tool.
@@ -256,7 +258,7 @@ typedef struct {
/** Offset 0x00F5 - Reserved
**/
- UINT8 Reserved13[24];
+ UINT8 Reserved11[24];
/** Offset 0x010D - Memory Reference Clock
100MHz, 133MHz.
@@ -266,7 +268,7 @@ typedef struct {
/** Offset 0x010E - Reserved
**/
- UINT8 Reserved14[26];
+ UINT8 Reserved12[26];
/** Offset 0x0128 - Enable Intel HD Audio (Azalia)
0: Disable, 1: Enable (Default) Azalia controller
@@ -283,7 +285,7 @@ typedef struct {
/** Offset 0x012A - Reserved
**/
- UINT8 Reserved15[98];
+ UINT8 Reserved13[98];
/** Offset 0x018C - Program GPIOs for LFP on DDI port-A device
0=Disabled,1(Default)=eDP, 2=MIPI DSI
@@ -293,7 +295,7 @@ typedef struct {
/** Offset 0x018D - Reserved
**/
- UINT8 Reserved16[2];
+ UINT8 Reserved14[2];
/** Offset 0x018F - Enable or disable HPD of DDI port B
0=Disable, 1(Default)=Enable
@@ -309,7 +311,7 @@ typedef struct {
/** Offset 0x0191 - Reserved
**/
- UINT8 Reserved17[5];
+ UINT8 Reserved15[5];
/** Offset 0x0196 - Enable or disable DDC of DDI port B
0=Disable, 1(Default)=Enable
@@ -325,7 +327,7 @@ typedef struct {
/** Offset 0x0198 - Reserved
**/
- UINT8 Reserved18[165];
+ UINT8 Reserved16[165];
/** Offset 0x023D - C6DRAM power gating feature
This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM
@@ -337,7 +339,7 @@ typedef struct {
/** Offset 0x023E - Reserved
**/
- UINT8 Reserved19[7];
+ UINT8 Reserved17[7];
/** Offset 0x0245 - CPU ratio value
CPU ratio value. Valid Range 0 to 63
@@ -346,7 +348,7 @@ typedef struct {
/** Offset 0x0246 - Reserved
**/
- UINT8 Reserved20[4];
+ UINT8 Reserved18[4];
/** Offset 0x024A - Enable or Disable VMX
Enable or Disable VMX; 0: Disable; <b>1: Enable</b>.
@@ -356,7 +358,7 @@ typedef struct {
/** Offset 0x024B - Reserved
**/
- UINT8 Reserved21[31];
+ UINT8 Reserved19[31];
/** Offset 0x026A - BiosGuard
Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable
@@ -366,7 +368,7 @@ typedef struct {
/** Offset 0x026B - Reserved
**/
- UINT8 Reserved22[5];
+ UINT8 Reserved20[5];
/** Offset 0x0270 - PrmrrSize
Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable
@@ -380,7 +382,7 @@ typedef struct {
/** Offset 0x0278 - Reserved
**/
- UINT8 Reserved23[543];
+ UINT8 Reserved21[543];
/** Offset 0x0497 - Usage type for ClkSrc
0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
@@ -395,7 +397,7 @@ typedef struct {
/** Offset 0x04B7 - Reserved
**/
- UINT8 Reserved24[5];
+ UINT8 Reserved22[5];
/** Offset 0x04BC - Enable PCIE RP Mask
Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
@@ -418,7 +420,7 @@ typedef struct {
/** Offset 0x04C2 - Reserved
**/
- UINT8 Reserved25[22];
+ UINT8 Reserved23[22];
/** Offset 0x04D8 - Early Command Training
Enables/Disable Early Command Training
@@ -428,7 +430,7 @@ typedef struct {
/** Offset 0x04D9 - Reserved
**/
- UINT8 Reserved26[2];
+ UINT8 Reserved24[2];
/** Offset 0x04DB - Read MPR Training
Enables/Disable Read MPR Training
@@ -438,7 +440,7 @@ typedef struct {
/** Offset 0x04DC - Reserved
**/
- UINT8 Reserved27[7];
+ UINT8 Reserved25[7];
/** Offset 0x04E3 - Dimm ODT Training
Enables/Disable Dimm ODT Training
@@ -454,7 +456,7 @@ typedef struct {
/** Offset 0x04E5 - Reserved
**/
- UINT8 Reserved28;
+ UINT8 Reserved26;
/** Offset 0x04E6 - Write Slew Rate Training
Enables/Disable Write Slew Rate Training
@@ -482,7 +484,7 @@ typedef struct {
/** Offset 0x04EA - Reserved
**/
- UINT8 Reserved29[3];
+ UINT8 Reserved27[3];
/** Offset 0x04ED - Read Voltage Centering 2D
Enables/Disable Read Voltage Centering 2D
@@ -492,7 +494,7 @@ typedef struct {
/** Offset 0x04EE - Reserved
**/
- UINT8 Reserved30[3];
+ UINT8 Reserved28[3];
/** Offset 0x04F1 - Turn Around Timing Training
Enables/Disable Turn Around Timing Training
@@ -502,7 +504,7 @@ typedef struct {
/** Offset 0x04F2 - Reserved
**/
- UINT8 Reserved31[6];
+ UINT8 Reserved29[6];
/** Offset 0x04F8 - Receive Enable Centering 1D
Enables/Disable Receive Enable Centering 1D
@@ -518,7 +520,7 @@ typedef struct {
/** Offset 0x04FA - Reserved
**/
- UINT8 Reserved32[60];
+ UINT8 Reserved30[60];
/** Offset 0x0536 - RAPL PL 1 WindowX
Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
@@ -532,7 +534,7 @@ typedef struct {
/** Offset 0x0538 - Reserved
**/
- UINT8 Reserved33[2];
+ UINT8 Reserved31[2];
/** Offset 0x053A - RAPL PL 1 Power
range[0;2^14-1]= [2047.875;0]in W, (224= Def)
@@ -541,7 +543,7 @@ typedef struct {
/** Offset 0x053C - Reserved
**/
- UINT8 Reserved34[68];
+ UINT8 Reserved32[68];
/** Offset 0x0580 - LpDdrDqDqsReTraining
Enables/Disable LpDdrDqDqsReTraining
@@ -551,7 +553,7 @@ typedef struct {
/** Offset 0x0581 - Reserved
**/
- UINT8 Reserved35[172];
+ UINT8 Reserved33[172];
/** Offset 0x062D - Enable HD Audio Link
Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
@@ -561,7 +563,7 @@ typedef struct {
/** Offset 0x062E - Reserved
**/
- UINT8 Reserved36[3];
+ UINT8 Reserved34[3];
/** Offset 0x0631 - Enable HD Audio DMIC_N Link
Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
@@ -570,7 +572,7 @@ typedef struct {
/** Offset 0x0633 - Reserved
**/
- UINT8 Reserved37[17];
+ UINT8 Reserved35[17];
/** Offset 0x0644 - Enable HD Audio DSP
Enable/disable HD Audio DSP feature.
@@ -580,7 +582,7 @@ typedef struct {
/** Offset 0x0645 - Reserved
**/
- UINT8 Reserved38[11];
+ UINT8 Reserved36[11];
/** Offset 0x0650 - Enable HD Audio SSP0 Link
Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5
@@ -594,7 +596,7 @@ typedef struct {
/** Offset 0x065A - Reserved
**/
- UINT8 Reserved39[7];
+ UINT8 Reserved37[7];
/** Offset 0x0661 - Skip MBP HOB
Test, 0: disable, 1: enable, Enable/Disable MOB HOB.
@@ -604,7 +606,7 @@ typedef struct {
/** Offset 0x0662 - Reserved
**/
- UINT8 Reserved40[22];
+ UINT8 Reserved38[22];
} FSP_M_CONFIG;
/** Fsp M UPD Configuration
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h
index d01ae6ab46..15e78c2c75 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -283,9 +283,21 @@ typedef struct {
**/
UINT8 SerialIoI2cMode[8];
-/** Offset 0x0250 - Reserved
+/** Offset 0x0250 - Serial IO I2C SDA Pin Muxing
+ Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for
+ possible values.
**/
- UINT8 Reserved7[72];
+ UINT32 PchSerialIoI2cSdaPinMux[8];
+
+/** Offset 0x0270 - Serial IO I2C SCL Pin Muxing
+ Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for
+ possible values.
+**/
+ UINT32 PchSerialIoI2cSclPinMux[8];
+
+/** Offset 0x0290 - Reserved
+**/
+ UINT8 Reserved7[8];
/** Offset 0x0298 - USB Per Port HS Preemphasis Bias
USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
@@ -422,20 +434,9 @@ typedef struct {
/** Offset 0x0384 - Reserved
**/
- UINT8 Reserved14[6];
+ UINT8 Reserved14[146];
-/** Offset 0x038A - HECI3 state
- The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed.
- 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 Heci3Enabled;
-
-/** Offset 0x038B - Reserved
-**/
- UINT8 Reserved15[141];
-
-/** Offset 0x0418 - CdClock Frequency selection
+/** Offset 0x0416 - CdClock Frequency selection
0: (Default) Auto (Max based on reference clock frequency), 1: 172.8 Mhz, 2: 180
Mhz, 3: 190 Mhz, 4: 307.2 Mhz, 5: 312 Mhz, 6: 552 Mhz, 7: 556.8 Mhz, 8: 648 Mhz,
9: 652.8 Mhz
@@ -444,109 +445,109 @@ typedef struct {
**/
UINT8 CdClock;
-/** Offset 0x0419 - Enable/Disable PeiGraphicsPeimInit
+/** Offset 0x0417 - Enable/Disable PeiGraphicsPeimInit
Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit
$EN_DIS
**/
UINT8 PeiGraphicsPeimInit;
-/** Offset 0x041A - Reserved
+/** Offset 0x0418 - Reserved
**/
- UINT8 Reserved16[160];
+ UINT8 Reserved15[152];
-/** Offset 0x04BA - Skip Multi-Processor Initialization
+/** Offset 0x04B0 - Skip Multi-Processor Initialization
When this is skipped, boot loader must initialize processors before SilicionInit
API. </b>0: Initialize; <b>1: Skip
$EN_DIS
**/
UINT8 SkipMpInit;
-/** Offset 0x04BB - Reserved
+/** Offset 0x04B1 - Reserved
**/
- UINT8 Reserved17[9];
+ UINT8 Reserved16[11];
-/** Offset 0x04C4 - CpuMpPpi
+/** Offset 0x04BC - CpuMpPpi
Pointer for CpuMpPpi
**/
UINT32 CpuMpPpi;
-/** Offset 0x04C8 - Reserved
+/** Offset 0x04C0 - Reserved
**/
- UINT8 Reserved18[86];
+ UINT8 Reserved17[86];
-/** Offset 0x051E - RTC Cmos Memory Lock
+/** Offset 0x0516 - RTC Cmos Memory Lock
Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
and and lower 128-byte bank of RTC RAM.
$EN_DIS
**/
UINT8 RtcMemoryLock;
-/** Offset 0x051F - Reserved
+/** Offset 0x0517 - Reserved
**/
- UINT8 Reserved19[24];
+ UINT8 Reserved18[24];
-/** Offset 0x0537 - Enable PCIE RP Pm Sci
+/** Offset 0x052F - Enable PCIE RP Pm Sci
Indicate whether the root port power manager SCI is enabled.
**/
UINT8 PcieRpPmSci[24];
-/** Offset 0x054F - Reserved
+/** Offset 0x0547 - Reserved
**/
- UINT8 Reserved20[24];
+ UINT8 Reserved19[24];
-/** Offset 0x0567 - Enable PCIE RP Clk Req Detect
+/** Offset 0x055F - Enable PCIE RP Clk Req Detect
Probe CLKREQ# signal before enabling CLKREQ# based power management.
**/
UINT8 PcieRpClkReqDetect[24];
-/** Offset 0x057F - Reserved
+/** Offset 0x0577 - Reserved
**/
- UINT8 Reserved21[455];
+ UINT8 Reserved20[455];
-/** Offset 0x0746 - PCH Pm Slp S3 Min Assert
+/** Offset 0x073E - PCH Pm Slp S3 Min Assert
SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
**/
UINT8 PchPmSlpS3MinAssert;
-/** Offset 0x0747 - Reserved
+/** Offset 0x073F - Reserved
**/
- UINT8 Reserved22;
+ UINT8 Reserved21;
-/** Offset 0x0748 - PCH Pm Slp Sus Min Assert
+/** Offset 0x0740 - PCH Pm Slp Sus Min Assert
SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
**/
UINT8 PchPmSlpSusMinAssert;
-/** Offset 0x0749 - PCH Pm Slp A Min Assert
+/** Offset 0x0741 - PCH Pm Slp A Min Assert
SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
**/
UINT8 PchPmSlpAMinAssert;
-/** Offset 0x074A - Reserved
+/** Offset 0x0742 - Reserved
**/
- UINT8 Reserved23[11];
+ UINT8 Reserved22[11];
-/** Offset 0x0755 - PCH Sata Pwr Opt Enable
+/** Offset 0x074D - PCH Sata Pwr Opt Enable
SATA Power Optimizer on PCH side.
$EN_DIS
**/
UINT8 SataPwrOptEnable;
-/** Offset 0x0756 - Reserved
+/** Offset 0x074E - Reserved
**/
- UINT8 Reserved24[146];
+ UINT8 Reserved23[146];
-/** Offset 0x07E8 - USB2 Port Over Current Pin
+/** Offset 0x07E0 - USB2 Port Over Current Pin
Describe the specific over current pin number of USB 2.0 Port N.
**/
UINT8 Usb2OverCurrentPin[16];
-/** Offset 0x07F8 - USB3 Port Over Current Pin
+/** Offset 0x07F0 - USB3 Port Over Current Pin
Describe the specific over current pin number of USB 3.0 Port N.
**/
UINT8 Usb3OverCurrentPin[10];
-/** Offset 0x0802 - Enable 8254 Static Clock Gating
+/** Offset 0x07FA - Enable 8254 Static Clock Gating
Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support
legacy OS using 8254 timer. Also enable this while S0ix is enabled.
@@ -554,7 +555,7 @@ typedef struct {
**/
UINT8 Enable8254ClockGating;
-/** Offset 0x0803 - Enable 8254 Static Clock Gating On S3
+/** Offset 0x07FB - Enable 8254 Static Clock Gating On S3
This is only applicable when Enable8254ClockGating is disabled. FSP will do the
8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This
avoids the SMI requirement for the programming.
@@ -562,21 +563,21 @@ typedef struct {
**/
UINT8 Enable8254ClockGatingOnS3;
-/** Offset 0x0804 - Reserved
+/** Offset 0x07FC - Reserved
**/
- UINT8 Reserved25[531];
+ UINT8 Reserved24[511];
-/** Offset 0x0A17 - Enable/Disable IGFX PmSupport
+/** Offset 0x09FB - Enable/Disable IGFX PmSupport
Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
$EN_DIS
**/
UINT8 PmSupport;
-/** Offset 0x0A18 - Reserved
+/** Offset 0x09FC - Reserved
**/
- UINT8 Reserved26[32];
+ UINT8 Reserved25[32];
-/** Offset 0x0A38 - TCC Activation Offset
+/** Offset 0x0A1C - TCC Activation Offset
TCC Activation Offset. Offset from factory set TCC activation temperature at which
the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation
Temperature, in volts.For SKL Y SKU, the recommended default for this policy is
@@ -584,50 +585,50 @@ typedef struct {
**/
UINT8 TccActivationOffset;
-/** Offset 0x0A39 - Reserved
+/** Offset 0x0A1D - Reserved
**/
- UINT8 Reserved27[34];
+ UINT8 Reserved26[34];
-/** Offset 0x0A5B - Enable or Disable CPU power states (C-states)
+/** Offset 0x0A3F - Enable or Disable CPU power states (C-states)
Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
$EN_DIS
**/
UINT8 Cx;
-/** Offset 0x0A5C - Reserved
+/** Offset 0x0A40 - Reserved
**/
- UINT8 Reserved28[74];
+ UINT8 Reserved27[74];
-/** Offset 0x0AA6 - Platform Power Pmax
+/** Offset 0x0A8A - Platform Power Pmax
PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
Range 0-1024 Watts. Value of 800 = 100W
**/
UINT16 PsysPmax;
-/** Offset 0x0AA8 - Reserved
+/** Offset 0x0A8C - Reserved
**/
- UINT8 Reserved29[116];
+ UINT8 Reserved28[116];
-/** Offset 0x0B1C - End of Post message
+/** Offset 0x0B00 - End of Post message
Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE
0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved
**/
UINT8 EndOfPostMessage;
-/** Offset 0x0B1D - Reserved
+/** Offset 0x0B01 - Reserved
**/
- UINT8 Reserved30[3];
+ UINT8 Reserved29[3];
-/** Offset 0x0B20 - Unlock all GPIO pads
+/** Offset 0x0B04 - Unlock all GPIO pads
Force all GPIO pads to be unlocked for debug purpose.
$EN_DIS
**/
UINT8 PchUnlockGpioPads;
-/** Offset 0x0B21 - Reserved
+/** Offset 0x0B05 - Reserved
**/
- UINT8 Reserved31[447];
+ UINT8 Reserved30[451];
} FSP_S_CONFIG;
/** Fsp S UPD Configuration
@@ -642,11 +643,11 @@ typedef struct {
**/
FSP_S_CONFIG FspsConfig;
-/** Offset 0x0CE0
+/** Offset 0x0CC8
**/
- UINT8 UnusedUpdSpace37[6];
+ UINT8 UnusedUpdSpace36[6];
-/** Offset 0x0CE6
+/** Offset 0x0CCE
**/
UINT16 UpdTerminator;
} FSPS_UPD;