summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/southbridge/intel/bd82x6x/azalia.c43
1 files changed, 20 insertions, 23 deletions
diff --git a/src/southbridge/intel/bd82x6x/azalia.c b/src/southbridge/intel/bd82x6x/azalia.c
index 7b51671d7e..2d854a4f23 100644
--- a/src/southbridge/intel/bd82x6x/azalia.c
+++ b/src/southbridge/intel/bd82x6x/azalia.c
@@ -120,10 +120,9 @@ static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb)
static int wait_for_ready(u32 base)
{
- /* Use a 50 usec timeout - the Linux kernel uses the
- * same duration */
+ /* Use a 1msec timeout */
- int timeout = 50;
+ int timeout = 1000;
while(timeout--) {
u32 reg32 = read32(base + HDA_ICII_REG);
@@ -150,10 +149,9 @@ static int wait_for_valid(u32 base)
reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID;
write32(base + HDA_ICII_REG, reg32);
- /* Use a 50 usec timeout - the Linux kernel uses the
- * same duration */
+ /* Use a 1msec timeout */
- int timeout = 50;
+ int timeout = 1000;
while(timeout--) {
reg32 = read32(base + HDA_ICII_REG);
if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
@@ -254,12 +252,12 @@ static void azalia_init(struct device *dev)
if (RCBA32(0x2030) & (1 << 31)) {
reg32 = pci_mmio_read_config32(dev, 0x120);
reg32 &= 0xf8ffff01;
- reg32 |= (1 << 24); // 25 for server
+ reg32 |= (1 << 24); // 2 << 24 for server
reg32 |= RCBA32(0x2030) & 0xfe;
pci_mmio_write_config32(dev, 0x120, reg32);
reg16 = pci_mmio_read_config16(dev, 0x78);
- reg16 &= ~(1 << 11);
+ reg16 |= (1 << 11);
pci_mmio_write_config16(dev, 0x78, reg16);
} else
printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n");
@@ -269,12 +267,9 @@ static void azalia_init(struct device *dev)
pci_mmio_write_config32(dev, 0x114, reg32);
// Set VCi enable bit
- if (pci_mmio_read_config32(dev, 0x120) & ((1 << 24) |
- (1 << 25) | (1 << 26))) {
- reg32 = pci_mmio_read_config32(dev, 0x120);
- reg32 |= (1 << 31);
- pci_mmio_write_config32(dev, 0x120, reg32);
- }
+ reg32 = pci_mmio_read_config32(dev, 0x120);
+ reg32 |= (1 << 31);
+ pci_mmio_write_config32(dev, 0x120, reg32);
// Enable HDMI codec:
reg32 = pci_read_config32(dev, 0xc4);
@@ -287,15 +282,6 @@ static void azalia_init(struct device *dev)
/* Additional programming steps */
reg32 = pci_read_config32(dev, 0xc4);
- reg32 |= (1 << 13) | (1 << 10);
- pci_write_config32(dev, 0xc4, reg32);
-
- reg32 = pci_read_config32(dev, 0xd0);
- reg32 &= ~(1 << 31);
- pci_write_config32(dev, 0xd0, reg32);
-
- /* Additional programming steps */
- reg32 = pci_read_config32(dev, 0xc4);
reg32 |= (1 << 13);
pci_write_config32(dev, 0xc4, reg32);
@@ -307,6 +293,13 @@ static void azalia_init(struct device *dev)
reg32 &= ~(1 << 31);
pci_write_config32(dev, 0xd0, reg32);
+ if (dev->device == 0x1e20) {
+ /* Additional step on Panther Point */
+ reg32 = pci_read_config32(dev, 0xc4);
+ reg32 |= (1 << 17);
+ pci_write_config32(dev, 0xc4, reg32);
+ }
+
/* Set Bus Master */
reg32 = pci_read_config32(dev, PCI_COMMAND);
pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
@@ -314,9 +307,13 @@ static void azalia_init(struct device *dev)
pci_write_config8(dev, 0x3c, 0x0a); // unused?
/* Codec Initialization Programming Sequence */
+
+ /* Take controller out of reset */
reg32 = read32(base + 0x08);
reg32 |= (1 << 0);
write32(base + 0x08, reg32);
+ /* Wait 1ms */
+ udelay(1000);
//
reg8 = pci_read_config8(dev, 0x40); // Audio Control