summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/via/epia-m700/romstage.c10
-rw-r--r--src/northbridge/intel/e7501/debug.c2
-rw-r--r--src/northbridge/via/cn400/vgabios.c4
-rw-r--r--src/northbridge/via/vx800/rank_map.c6
-rw-r--r--src/northbridge/via/vx800/vgabios.c8
-rw-r--r--src/northbridge/via/vx800/vx800_early_smbus.c63
6 files changed, 12 insertions, 81 deletions
diff --git a/src/mainboard/via/epia-m700/romstage.c b/src/mainboard/via/epia-m700/romstage.c
index ab148e478d..2e51c958d0 100644
--- a/src/mainboard/via/epia-m700/romstage.c
+++ b/src/mainboard/via/epia-m700/romstage.c
@@ -24,6 +24,7 @@
#define RAMINIT_SYSINFO 1
#define CACHE_AS_RAM_ADDRESS_DEBUG 0
+#define PAYLOAD_IS_SEABIOS 0
#include <stdint.h>
#include <device/pci_def.h>
@@ -85,11 +86,6 @@ static int acpi_is_wakeup_early_via_vx800(void)
return result;
}
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
/* All content of this function came from the cx700 port of coreboot. */
static void enable_mainboard_devices(void)
{
@@ -273,7 +269,8 @@ static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = {
#define gCom1Base 0x3f8
#define gCom2Base 0x2f8
-void EmbedComInit(void)
+#if 0
+static void EmbedComInit(void)
{
u8 ByteVal;
u16 ComBase;
@@ -379,6 +376,7 @@ void EmbedComInit(void)
/* SOutput("Embedded COM output\n"); */
/* while(1); */
}
+#endif
/* cache_as_ram.inc jumps to here. */
void main(unsigned long bist)
diff --git a/src/northbridge/intel/e7501/debug.c b/src/northbridge/intel/e7501/debug.c
index e5d3ac8741..1df2ed3d9c 100644
--- a/src/northbridge/intel/e7501/debug.c
+++ b/src/northbridge/intel/e7501/debug.c
@@ -140,7 +140,7 @@ static void dump_spd_registers(const struct mem_controller *ctrl)
int j;
#if CONFIG_USE_PRINTK_IN_CAR
printk(BIOS_DEBUG, "dimm: %02x.1: %02x", i, device);
-#else`
+#else
print_debug("dimm: ");
print_debug_hex8(i);
print_debug(".1: ");
diff --git a/src/northbridge/via/cn400/vgabios.c b/src/northbridge/via/cn400/vgabios.c
index 83ae77c4bb..5519b309cd 100644
--- a/src/northbridge/via/cn400/vgabios.c
+++ b/src/northbridge/via/cn400/vgabios.c
@@ -336,7 +336,7 @@ void do_vgabios(void)
{
device_t dev;
unsigned long busdevfn;
- unsigned int rom = 0;
+ u32 rom;
unsigned char *buf;
unsigned int size = 64*1024;
int i;
@@ -357,7 +357,7 @@ void do_vgabios(void)
/* declare rom address here - keep any config data out of the way
* of core LXB stuff */
- rom = cbfs_load_optionrom(dev->vendor, dev->device, 0);
+ rom = (u32)cbfs_load_optionrom(dev->vendor, dev->device, 0);
pci_write_config32(dev, PCI_ROM_ADDRESS, rom|1);
printk(BIOS_DEBUG, "VGA BIOS ROM base address: %x\n", rom);
diff --git a/src/northbridge/via/vx800/rank_map.c b/src/northbridge/via/vx800/rank_map.c
index df39ce5899..6c88c68953 100644
--- a/src/northbridge/via/vx800/rank_map.c
+++ b/src/northbridge/via/vx800/rank_map.c
@@ -17,12 +17,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-extern void DRAMSetVRNum(DRAM_SYS_ATTR * DramAttr,
- u8 PhyRank, u8 VirRank, BOOLEAN Enable);
-
-extern void SetEndingAddr(DRAM_SYS_ATTR * DramAttr, u8 VirRank, // Ending address register number indicator (INDEX
- INT8 Value); // (value) add or subtract value to this and after banks
-
void DRAMClearEndingAddress(DRAM_SYS_ATTR * DramAttr);
void DRAMSizingEachRank(DRAM_SYS_ATTR * DramAttr);
diff --git a/src/northbridge/via/vx800/vgabios.c b/src/northbridge/via/vx800/vgabios.c
index 9690170d1e..9425403afd 100644
--- a/src/northbridge/via/vx800/vgabios.c
+++ b/src/northbridge/via/vx800/vgabios.c
@@ -158,6 +158,7 @@ static void real_mode_switch_call_vga(unsigned long devfn)
/* put the stack at the end of page zero.
* that way we can easily share it between real and protected,
* since the 16-bit ESP at segment 0 will work for any case.
+ */
/* Setup a stack */
" mov $0x0, %ax \n"
" mov %ax, %ss \n"
@@ -240,6 +241,7 @@ void vga_enable_console()
/* put the stack at the end of page zero.
* that way we can easily share it between real and protected,
* since the 16-bit ESP at segment 0 will work for any case.
+ */
/* Setup a stack */
" mov $0x0, %ax \n"
" mov %ax, %ss \n"
@@ -295,7 +297,7 @@ void do_vgabios(void)
{
device_t dev;
unsigned long busdevfn;
- unsigned int rom = 0;
+ u32 rom;
unsigned char *buf;
unsigned int size = 64 * 1024;
int i;
@@ -318,7 +320,7 @@ void do_vgabios(void)
/* declare rom address here - keep any config data out of the way
* of core LXB stuff */
- rom = cbfs_load_optionrom(dev->vendor, dev->device, 0);
+ rom = (u32)cbfs_load_optionrom(dev->vendor, dev->device, 0);
pci_write_config32(dev, PCI_ROM_ADDRESS, rom | 1);
printk(BIOS_DEBUG, "rom base: %x\n", rom);
buf = (unsigned char *)rom;
@@ -617,7 +619,7 @@ void setup_realmode_idt(void)
TF bit is set upon call to real mode */
idts[1].cs = 0;
idts[1].offset = 16384;
- memcpy(16384, &debughandle, &end_debughandle - &debughandle);
+ memcpy((void *)16384, &debughandle, &end_debughandle - &debughandle);
}
diff --git a/src/northbridge/via/vx800/vx800_early_smbus.c b/src/northbridge/via/vx800/vx800_early_smbus.c
index 53ede31cf8..7ba9b41acb 100644
--- a/src/northbridge/via/vx800/vx800_early_smbus.c
+++ b/src/northbridge/via/vx800/vx800_early_smbus.c
@@ -108,62 +108,6 @@ static void smbus_reset(void)
}
/* Public functions */
-static unsigned int set_ics_data(unsigned char dev, int data, char len)
-{
- smbus_reset();
- /* clear host data port */
- outb(0x00, SMBHSTDAT0);
- SMBUS_DELAY();
- smbus_wait_until_ready();
-
- /* read to reset block transfer counter */
- inb(SMBHSTCTL);
-
- /* fill blocktransfer array */
- if (dev == 0xd2) {
- //char d2_data[] = {0x0d,0x00,0x3f,0xcd,0x7f,0xbf,0x1a,0x2a,0x01,0x0f,0x0b,0x00,0x8d,0x9b};
- outb(0x0d, SMBBLKDAT);
- outb(0x00, SMBBLKDAT);
- outb(0x3f, SMBBLKDAT);
- outb(0xcd, SMBBLKDAT);
- outb(0x7f, SMBBLKDAT);
- outb(0xbf, SMBBLKDAT);
- outb(0x1a, SMBBLKDAT);
- outb(0x2a, SMBBLKDAT);
- outb(0x01, SMBBLKDAT);
- outb(0x0f, SMBBLKDAT);
- outb(0x0b, SMBBLKDAT);
- outb(0x80, SMBBLKDAT);
- outb(0x8d, SMBBLKDAT);
- outb(0x9b, SMBBLKDAT);
- } else {
- //char d4_data[] = {0x08,0xff,0x3f,0x00,0x00,0xff,0xff,0xff,0xff};
- outb(0x08, SMBBLKDAT);
- outb(0xff, SMBBLKDAT);
- outb(0x3f, SMBBLKDAT);
- outb(0x00, SMBBLKDAT);
- outb(0x00, SMBBLKDAT);
- outb(0xff, SMBBLKDAT);
- outb(0xff, SMBBLKDAT);
- outb(0xff, SMBBLKDAT);
- outb(0xff, SMBBLKDAT);
- }
-
- //for (i=0; i < len; i++)
- // outb(data[i],SMBBLKDAT);
-
- outb(dev, SMBXMITADD);
- outb(0, SMBHSTCMD);
- outb(len, SMBHSTDAT0);
- outb(0x74, SMBHSTCTL);
-
- SMBUS_DELAY();
-
- smbus_wait_until_ready();
-
- smbus_reset();
- return 0;
-}
static unsigned int get_spd_data(unsigned int dimm, unsigned int offset)
{
@@ -219,13 +163,6 @@ static void enable_smbus(void)
/* Make it work for I/O ... */
pci_write_config16(dev, 0x04, 0x0003);
- /*
- coreboot hangs at this two lines after os reboot(this even happen after I change os
- reboot to cold reboot, this also interfere S3 wakeup) */
- /* Setup clock chips */
- //set_ics_data(0xd2, 0, 14);
- //set_ics_data(0xd4, 0, 9);
-
smbus_reset();
/* clear host data port */
outb(0x00, SMBHSTDAT0);