summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/lib/rmodule.ld2
-rw-r--r--src/northbridge/amd/amdfam10/misc_control.c2
-rw-r--r--src/northbridge/amd/amdmct/mct/mctecc_d.c2
-rw-r--r--src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c2
-rw-r--r--src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c2
-rw-r--r--src/northbridge/amd/amdmct/wrappers/mcti_d.c2
-rw-r--r--src/northbridge/amd/lx/northbridgeinit.c4
-rw-r--r--src/northbridge/intel/gm45/raminit.c4
-rw-r--r--src/northbridge/intel/pineview/raminit.c2
-rw-r--r--src/northbridge/intel/x4x/raminit_tables.c2
-rw-r--r--src/northbridge/via/vx900/raminit_ddr3.c8
-rw-r--r--src/security/tpm/tss/tcg-2.0/tss_marshaling.c2
-rw-r--r--src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h2
-rw-r--r--src/soc/intel/cannonlake/reset.c2
-rw-r--r--src/soc/intel/common/block/cse/cse.c2
-rw-r--r--src/soc/intel/skylake/bootblock/pch.c4
-rw-r--r--src/soc/intel/skylake/include/soc/iomap.h2
-rw-r--r--src/soc/rockchip/common/include/soc/spi.h4
-rw-r--r--src/soc/samsung/exynos5420/include/soc/memlayout.ld2
-rw-r--r--src/soc/samsung/exynos5420/include/soc/setup.h2
20 files changed, 27 insertions, 27 deletions
diff --git a/src/lib/rmodule.ld b/src/lib/rmodule.ld
index 340fe7ae13..ddf79257df 100644
--- a/src/lib/rmodule.ld
+++ b/src/lib/rmodule.ld
@@ -6,7 +6,7 @@
* NOTE: The program's loadable sections (text, module_params, and data) are
* packed into the flat blob. The rmodule loader assumes the entire program
* resides in one contiguous address space. Therefore, alignment for a given
- * section (if required) needs to be done at the end of the preceeding section.
+ * section (if required) needs to be done at the end of the preceding section.
* e.g. if the data section should be aligned to an 8 byte address the text
* section should have ALIGN(8) at the end of its section. Otherwise there
* won't be a consistent mapping between the flat blob and the loaded program.
diff --git a/src/northbridge/amd/amdfam10/misc_control.c b/src/northbridge/amd/amdfam10/misc_control.c
index 028f6af460..8323c1e20f 100644
--- a/src/northbridge/amd/amdfam10/misc_control.c
+++ b/src/northbridge/amd/amdfam10/misc_control.c
@@ -19,7 +19,7 @@
/* Turn off machine check triggers when reading
* pci space where there are no devices.
- * This is necessary when scaning the bus for
+ * This is necessary when scanning the bus for
* devices which is done by the kernel
*/
diff --git a/src/northbridge/amd/amdmct/mct/mctecc_d.c b/src/northbridge/amd/amdmct/mct/mctecc_d.c
index 18774ebe7a..7be63533a9 100644
--- a/src/northbridge/amd/amdmct/mct/mctecc_d.c
+++ b/src/northbridge/amd/amdmct/mct/mctecc_d.c
@@ -68,7 +68,7 @@ static u8 isDramECCEn_D(struct DCTStatStruc *pDCTstat);
* (aka SW memhole, cs hoisting, etc..).To init ECC memory on this node, the
* scrubber is used in two steps. First, the Dram Limit for the node is adjusted
* down to the bottom of the gap, and that ECC dram is initialized. Second, the
- * orignal Limit is restored, the Scrub base is set to 4GB, and scrubber is
+ * original Limit is restored, the Scrub base is set to 4GB, and scrubber is
* allowed to run until the Scrub Addr wraps around to zero.
*/
u8 ECCInit_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA)
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c
index 31c23b9445..20a636e480 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mctecc_d.c
@@ -83,7 +83,7 @@ static uint8_t is_fam15h(void)
* (aka SW memhole, cs hoisting, etc..).To init ECC memory on this node, the
* scrubber is used in two steps. First, the Dram Limit for the node is adjusted
* down to the bottom of the gap, and that ECC dram is initialized. Second, the
- * orignal Limit is restored, the Scrub base is set to 4GB, and scrubber is
+ * original Limit is restored, the Scrub base is set to 4GB, and scrubber is
* allowed to run until the Scrub Addr wraps around to zero.
*/
u8 ECCInit_D(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA)
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c
index ed942eaff2..f62aa1568a 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mhwlc_d.c
@@ -924,7 +924,7 @@ void programODT(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, ui
u8 WrLvOdt1 = 0;
if (is_fam15h()) {
- /* On Family15h processors, the value for the specific CS being targetted
+ /* On Family15h processors, the value for the specific CS being targeted
* is taken from F2x238 / F2x23C as appropriate, then loaded into F2x9C_x0000_0008
*/
diff --git a/src/northbridge/amd/amdmct/wrappers/mcti_d.c b/src/northbridge/amd/amdmct/wrappers/mcti_d.c
index 3d9ff3ec14..bcf3ddc7fd 100644
--- a/src/northbridge/amd/amdmct/wrappers/mcti_d.c
+++ b/src/northbridge/amd/amdmct/wrappers/mcti_d.c
@@ -170,7 +170,7 @@ u16 mctGet_NVbits(u8 index)
case NV_SPDCHK_RESTRT:
val = 0; /* Exit current node initialization if any DIMM has SPD checksum error */
//val = 1; /* Ignore faulty SPD checksum (DIMM will still be disabled), continue current node initialization */
- //val = 2; /* Override faulty SPD checksum (DIMM will be enabled), continue current node intialization */
+ //val = 2; /* Override faulty SPD checksum (DIMM will be enabled), continue current node initialization */
if (get_option(&nvram, "dimm_spd_checksum") == CB_SUCCESS)
val = nvram & 0x3;
diff --git a/src/northbridge/amd/lx/northbridgeinit.c b/src/northbridge/amd/lx/northbridgeinit.c
index 6c2efb320c..c7db156ceb 100644
--- a/src/northbridge/amd/lx/northbridgeinit.c
+++ b/src/northbridge/amd/lx/northbridgeinit.c
@@ -122,7 +122,7 @@ static void SysmemInit(struct gliutable *gl)
int sizembytes, sizebytes;
/*
- * Figure out how much RAM is in the machine and alocate all to the
+ * Figure out how much RAM is in the machine and allocate all to the
* system. We will adjust for SMM now and Frame Buffer later.
*/
sizembytes = sizeram();
@@ -272,7 +272,7 @@ static void GLPCIInit(void)
* base of 1M and top of around 256M
*/
/* we have to create a page-aligned (4KB page) address for base and top */
- /* So we need a high page aligned addresss (pah) and low page aligned address (pal)
+ /* So we need a high page aligned address (pah) and low page aligned address (pal)
* pah is from msr.hi << 12 | msr.low >> 20. pal is msr.lo << 12
*/
pah = ((msr.hi & 0xFF) << 12) | ((msr.lo >> 20) & 0xFFF);
diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c
index 08f954d057..03f617c6a3 100644
--- a/src/northbridge/intel/gm45/raminit.c
+++ b/src/northbridge/intel/gm45/raminit.c
@@ -869,7 +869,7 @@ static void configure_dram_control_mode(const timings_t *const timings, const di
static void rcomp_initialization(const stepping_t stepping, const int sff)
{
- /* Programm RCOMP codes. */
+ /* Program RCOMP codes. */
if (sff)
die("SFF platform unsupported in RCOMP initialization.\n");
/* Values are for DDR3. */
@@ -1825,7 +1825,7 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume)
/* Some last optimizations. */
dram_optimizations(timings, dimms);
- /* Mark raminit beeing finished. :-) */
+ /* Mark raminit being finished. :-) */
u8 tmp8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2) & ~(1 << 7);
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, tmp8);
diff --git a/src/northbridge/intel/pineview/raminit.c b/src/northbridge/intel/pineview/raminit.c
index 66f0a10419..2a1e34cea2 100644
--- a/src/northbridge/intel/pineview/raminit.c
+++ b/src/northbridge/intel/pineview/raminit.c
@@ -1972,7 +1972,7 @@ static void sdram_rcven(struct sysinfo *s)
MCHBAR32(0x248) = (MCHBAR32(0x248) & ~0xf0000)
| (curcoarse << 16);
if (curcoarse == 0) {
- PRINTK_DEBUG("Error: DQS didnt hit 0\n");
+ PRINTK_DEBUG("Error: DQS did not hit 0\n");
break;
}
}
diff --git a/src/northbridge/intel/x4x/raminit_tables.c b/src/northbridge/intel/x4x/raminit_tables.c
index 401af15cd8..ebd1562bde 100644
--- a/src/northbridge/intel/x4x/raminit_tables.c
+++ b/src/northbridge/intel/x4x/raminit_tables.c
@@ -332,7 +332,7 @@ const u32 ddr3_c2_tab[2][3][6][2] = { /* [n-mode][ddr3 freq][CAS][reg] */
{0x0189, 0x000aaa}, /* CAS = 5 */
{0x0189, 0x101aaa}, /* CAS = 6 */
{0x0000, 0x000000}, /* CAS = 7 - Not supported */
- {0x0000, 0x000000} /* CAS = 8 - Not suppported */
+ {0x0000, 0x000000} /* CAS = 8 - Not supported */
},
{ /* DDR3 1067 */
{0x0000, 0x000000}, /* CAS = 5 - Not supported */
diff --git a/src/northbridge/via/vx900/raminit_ddr3.c b/src/northbridge/via/vx900/raminit_ddr3.c
index eec4aa357f..17a87bbe97 100644
--- a/src/northbridge/via/vx900/raminit_ddr3.c
+++ b/src/northbridge/via/vx900/raminit_ddr3.c
@@ -42,7 +42,7 @@
*
* The capture window is not calibrated, but preset. Whether that preset is
* universal or frequency dependent, and whether it is board-specific or not is
- * not yet clear. @see vx900_dram_calibrate_recieve_delays().
+ * not yet clear. @see vx900_dram_calibrate_receive_delays().
*
* 4GBit and 8GBit modules may not work. This is untested. Modules with 11
* column address bits are not tested. @see vx900_dram_map_row_col_bank()
@@ -166,7 +166,7 @@ static pci_reg8 mcu_init_config[] = {
{0x66, 0x80}, /* DRAM Queue / Arbitration */
{0x69, 0xc6}, /* Bank Control: 8 banks, high priority refresh */
{0x6a, 0xfc}, /* DRAMC Request Reorder Control */
- {0x6e, 0x38}, /* Burst lenght: 8, burst-chop: enable */
+ {0x6e, 0x38}, /* Burst length: 8, burst-chop: enable */
{0x73, 0x04}, /* Close All Pages Threshold */
/* The following need to be dynamically asserted */
@@ -1224,7 +1224,7 @@ static void vx900_rxdqs_adjust(delay_range * dly)
vx900_write_0x78_0x7f(dly->avg);
}
-static void vx900_dram_calibrate_recieve_delays(vx900_delay_calib * delays,
+static void vx900_dram_calibrate_receive_delays(vx900_delay_calib * delays,
u8 pinswap)
{
size_t n_tries = 0;
@@ -1417,7 +1417,7 @@ static void vx900_dram_calibrate_delays(const ramctr_timing * ctrl,
/* Only run on first rank, remember? */
break;
}
- vx900_dram_calibrate_recieve_delays(&delay_cal,
+ vx900_dram_calibrate_receive_delays(&delay_cal,
ranks->flags[i].pins_mirrored);
printram("RX DQS calibration results\n");
dump_delay_range(delay_cal.rx_dqs);
diff --git a/src/security/tpm/tss/tcg-2.0/tss_marshaling.c b/src/security/tpm/tss/tcg-2.0/tss_marshaling.c
index 94bfbcfb10..ad23d9bf5e 100644
--- a/src/security/tpm/tss/tcg-2.0/tss_marshaling.c
+++ b/src/security/tpm/tss/tcg-2.0/tss_marshaling.c
@@ -222,7 +222,7 @@ static int marshal_nv_read(struct obuf *ob,
return rc;
}
-/* TPM2_Clear command does not require paramaters. */
+/* TPM2_Clear command does not require parameters. */
static int marshal_clear(struct obuf *ob)
{
const uint32_t handle[] = { TPM_RH_PLATFORM };
diff --git a/src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h b/src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h
index 93489bb8d4..7e233fa2d4 100644
--- a/src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h
+++ b/src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h
@@ -38,7 +38,7 @@
#endif /* GET & SET */
/***************************************************************************
- *DDR34_CORE_PHY_CONTROL_REGS - DDR34 CORE DDR34 Address/Comand control registers
+ *DDR34_CORE_PHY_CONTROL_REGS - DDR34 CORE DDR34 Address/Command control registers
***************************************************************************/
#define DDR34_CORE_PHY_CONTROL_REGS_REVISION 0x00000000 /* Address & Control revision register */
#define DDR34_CORE_PHY_CONTROL_REGS_PLL_STATUS 0x00000004 /* PHY PLL status register */
diff --git a/src/soc/intel/cannonlake/reset.c b/src/soc/intel/cannonlake/reset.c
index 26f0a632a0..140fbff6a5 100644
--- a/src/soc/intel/cannonlake/reset.c
+++ b/src/soc/intel/cannonlake/reset.c
@@ -74,7 +74,7 @@ static int send_heci_reset_message(void)
printk(BIOS_DEBUG, "Returned Mkhi Status is not success!\n");
return -1;
}
- printk(BIOS_DEBUG, "Heci recieve success!\n");
+ printk(BIOS_DEBUG, "Heci receive success!\n");
return 0;
}
diff --git a/src/soc/intel/common/block/cse/cse.c b/src/soc/intel/common/block/cse/cse.c
index 8651297905..4b531177f4 100644
--- a/src/soc/intel/common/block/cse/cse.c
+++ b/src/soc/intel/common/block/cse/cse.c
@@ -443,7 +443,7 @@ int heci_receive(void *buff, size_t *maxlen)
do {
received = recv_one_message(&hdr, p, left);
if (!received) {
- printk(BIOS_ERR, "HECI: Failed to recieve!\n");
+ printk(BIOS_ERR, "HECI: Failed to receive!\n");
return 0;
}
left -= received;
diff --git a/src/soc/intel/skylake/bootblock/pch.c b/src/soc/intel/skylake/bootblock/pch.c
index 4c88ed55bf..26ea56a93a 100644
--- a/src/soc/intel/skylake/bootblock/pch.c
+++ b/src/soc/intel/skylake/bootblock/pch.c
@@ -124,7 +124,7 @@ static void soc_config_tco(void)
pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32);
/* Program TCO Base */
- pci_write_config32(PCH_DEV_SMBUS, TCOBASE, TCO_BASE_ADDDRESS);
+ pci_write_config32(PCH_DEV_SMBUS, TCOBASE, TCO_BASE_ADDRESS);
/* Enable TCO in SMBUS */
pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32 | TCO_EN);
@@ -133,7 +133,7 @@ static void soc_config_tco(void)
* Program "TCO Base Address" PCR[DMI] + 2778h[15:5, 1]
* to [SMBUS PCI offset 50h[15:5], 1].
*/
- pcr_write32(PID_DMI, PCR_DMI_TCOBASE, TCO_BASE_ADDDRESS | (1 << 1));
+ pcr_write32(PID_DMI, PCR_DMI_TCOBASE, TCO_BASE_ADDRESS | (1 << 1));
/* Program TCO timer halt */
tcobase = pci_read_config16(PCH_DEV_SMBUS, TCOBASE);
diff --git a/src/soc/intel/skylake/include/soc/iomap.h b/src/soc/intel/skylake/include/soc/iomap.h
index f2fde715f7..475d79db71 100644
--- a/src/soc/intel/skylake/include/soc/iomap.h
+++ b/src/soc/intel/skylake/include/soc/iomap.h
@@ -87,7 +87,7 @@
#define ACPI_BASE_ADDRESS 0x1800
#define ACPI_BASE_SIZE 0x100
-#define TCO_BASE_ADDDRESS 0x400
+#define TCO_BASE_ADDRESS 0x400
#define TCO_BASE_SIZE 0x20
#define P2SB_BAR CONFIG_PCR_BASE_ADDRESS
diff --git a/src/soc/rockchip/common/include/soc/spi.h b/src/soc/rockchip/common/include/soc/spi.h
index 0e1847c985..ce5de83c62 100644
--- a/src/soc/rockchip/common/include/soc/spi.h
+++ b/src/soc/rockchip/common/include/soc/spi.h
@@ -101,9 +101,9 @@ check_member(rockchip_spi, rxdr, 0x800);
/* SSN to Sclk_out delay */
#define SPI_SSN_DELAY_OFFSET 10
#define SPI_SSN_DELAY_MASK 0x1
-/* the peroid between ss_n active and sclk_out active is half sclk_out cycles */
+/* the period between ss_n active and sclk_out active is half sclk_out cycles */
#define SPI_SSN_DELAY_HALF 0x00
-/* the peroid between ss_n active and sclk_out active is one sclk_out cycle */
+/* the period between ss_n active and sclk_out active is one sclk_out cycle */
#define SPI_SSN_DELAY_ONE 0x01
/* Serial Endian Mode */
diff --git a/src/soc/samsung/exynos5420/include/soc/memlayout.ld b/src/soc/samsung/exynos5420/include/soc/memlayout.ld
index 1f13bb9e62..bc5d0669da 100644
--- a/src/soc/samsung/exynos5420/include/soc/memlayout.ld
+++ b/src/soc/samsung/exynos5420/include/soc/memlayout.ld
@@ -26,7 +26,7 @@ SECTIONS
{
SRAM_START(0x2020000)
/* 17K hole, includes BL1 */
- /* Bootblock is preceeded by 16 byte variable length BL2 checksum. */
+ /* Bootblock is preceded by 16 byte variable length BL2 checksum. */
BOOTBLOCK(0x2024410, 32K - 16)
/* 15K hole */
ROMSTAGE(0x2030000, 128K)
diff --git a/src/soc/samsung/exynos5420/include/soc/setup.h b/src/soc/samsung/exynos5420/include/soc/setup.h
index f024a2df45..139f5b756a 100644
--- a/src/soc/samsung/exynos5420/include/soc/setup.h
+++ b/src/soc/samsung/exynos5420/include/soc/setup.h
@@ -729,7 +729,7 @@ struct exynos5_phy_control;
#define CTRL_RDLAT_OFFSET 0
#define CMD_DEFAULT_LPDDR3 0xF
-#define CMD_DEFUALT_OFFSET 0
+#define CMD_DEFAULT_OFFSET 0
#define T_WRDATA_EN 0x7
#define T_WRDATA_EN_DDR3 0x8 /* FIXME(dhendrix): 6 for DDR3? see T_wrdata_en */
#define T_WRDATA_EN_OFFSET 16