summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/include/device/mipi_ids.h21
-rw-r--r--src/include/device/soundwire.h429
2 files changed, 450 insertions, 0 deletions
diff --git a/src/include/device/mipi_ids.h b/src/include/device/mipi_ids.h
new file mode 100644
index 0000000000..2e0254c0b7
--- /dev/null
+++ b/src/include/device/mipi_ids.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* This file is part of the coreboot project. */
+
+/*
+ * MIPI Alliance Manufacturer IDs from https://mid.mipi.org
+ */
+
+#ifndef __DEVICE_MIPI_IDS_H__
+#define __DEVICE_MIPI_IDS_H__
+
+/* Board Members */
+#define MIPI_MFG_ID_INTEL 0x0105
+#define MIPI_MFG_ID_QUALCOMM 0x0217
+#define MIPI_MFG_ID_BOSCH 0x03b8
+#define MIPI_MFG_ID_SAMSUNG 0x010b
+#define MIPI_MFG_ID_ST_MICRO 0x0104
+#define MIPI_MFG_ID_SYNOPSYS 0x0148
+#define MIPI_MFG_ID_TI 0x0102
+#define MIPI_MFG_ID_TOSHIBA 0x0126
+
+#endif /* __DEVICE_MIPI_IDS_H__ */
diff --git a/src/include/device/soundwire.h b/src/include/device/soundwire.h
new file mode 100644
index 0000000000..85e3186219
--- /dev/null
+++ b/src/include/device/soundwire.h
@@ -0,0 +1,429 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * This header implements structures to describe the properties defined in the
+ * SoundWire Discovery and Configuration (DisCo) Specification Version 1.0.
+ *
+ * This is available for non-members after providing a name and email address at
+ * https://resources.mipi.org/disco_soundwire
+ *
+ * The structure members mirror the property names defined in the specification,
+ * with the exception that '-' is transformed into '_' for compatible naming.
+ *
+ * See Documentation/drivers/soundwire.md for more information.
+ */
+
+#ifndef __DEVICE_SOUNDWIRE_H__
+#define __DEVICE_SOUNDWIRE_H__
+
+#include <stdbool.h>
+#include <stdint.h>
+
+/**
+ * enum soundwire_limits - Limits on number of SoundWire devices in topology.
+ * @SOUNDWIRE_MAX: Maximum value for lists of configuration values in SoundWire devices.
+ * @SOUNDWIRE_MIN_DPN: Data Port minimum value. DPn range is 1-14.
+ * @SOUNDWIRE_MAX_DPN: Data Port maximum value. DPn range is 1-14.
+ * @SOUNDWIRE_MAX_SLAVE: Maximum number of slave devices that can be attached to one master.
+ * @SOUNDWIRE_MAX_LINK: Maximum number of master link devices that can be on one controller.
+ * @SOUNDWIRE_MAX_LANE: Maximum number of lanes in a multi-lane slave device.
+ * @SOUNDWIRE_MAX_MODE: Maximum number of Audio or Bulk Register Access modes.
+ */
+enum soundwire_limits {
+ SOUNDWIRE_MAX = 32,
+ SOUNDWIRE_MIN_DPN = 1,
+ SOUNDWIRE_MAX_DPN = 14,
+ SOUNDWIRE_MAX_SLAVE = 11,
+ SOUNDWIRE_MAX_LINK = 8,
+ SOUNDWIRE_MAX_LANE = 8,
+ SOUNDWIRE_MAX_MODE = 4
+};
+
+/**
+ * enum soundwire_sw_version - Versions of SoundWire Discovery and Configuration Specification.
+ * @SOUNDWIRE_SW_VERSION_1_0: DisCo Specification Version 1.0 released November 2016.
+ */
+enum soundwire_sw_version {
+ SOUNDWIRE_SW_VERSION_1_0 = 0x00010000
+};
+
+/**
+ * enum soundwire_version - Versions of SoundWire Specification supported by a device.
+ * @SOUNDWIRE_VERSION_1_0: SoundWire Specification Version 1.0 released January 2015.
+ * @SOUNDWIRE_VERSION_1_1: SoundWire Specification Version 1.1 released June 2016.
+ * @SOUNDWIRE_VERSION_1_2: SoundWire Specification Version 1.2 released April 2019.
+ */
+enum soundwire_version {
+ SOUNDWIRE_VERSION_1_0 = 1,
+ SOUNDWIRE_VERSION_1_1,
+ SOUNDWIRE_VERSION_1_2
+};
+
+/**
+ * enum mipi_class - MIPI class encoding.
+ * @MIPI_CLASS_NONE: No further class decoding.
+ * @MIPI_CLASS_SDCA: Device implements SoundWire Device Class for Audio (SDCA).
+ *
+ * 0x02-0x7F: Reserved
+ * 0x80-0xFF: MIPI Alliance extended device class
+ */
+enum mipi_class {
+ MIPI_CLASS_NONE,
+ MIPI_CLASS_SDCA
+};
+
+/**
+ * struct soundwire_address - SoundWire Device Address Encoding.
+ * @version: SoundWire specification version from &enum soundwire_version.
+ * @link_id: Zero-based SoundWire master link id.
+ * @unique_id: Unique ID for multiple slave devices on the same bus.
+ * @manufacturer_id: Manufacturer ID from include/device/mipi_ids.h.
+ * @part_id: Vendor defined part ID.
+ * @class: MIPI class encoding in &enum mipi_class.
+ */
+struct soundwire_address {
+ enum soundwire_version version;
+ uint8_t link_id;
+ uint8_t unique_id;
+ uint16_t manufacturer_id;
+ uint16_t part_id;
+ enum mipi_class class;
+};
+
+/**
+ * struct soundwire_link - SoundWire master device properties.
+ * @clock_stop_mode0_supported: %true if clock stop mode0 is supported by this device.
+ * @clock_stop_mode1_supported: %true if clock stop mode1 is supported by this device.
+ * @max_clock_frequency: Maximum bus clock for this device in Hz.
+ * @supported_clock_gears_count: Number of entries in supported_clock_gears.
+ * @supported_clock_gears: One entry for each supported clock gear.
+ * @clock_frequencies_supported_count: Number of entries in clock_frequencies_supported.
+ * @clock_frequencies_supported: One entry for each clock frequency supported in Hz.
+ * @default_frame_rate: Controller default frame rate in Hz.
+ * @default_frame_row_size: Number of rows between 48-256.
+ * @default_frame_col_size: Number of columns: 2, 4, 8, 16.
+ * @dynamic_frame_shape: %true if bus driver may change frame shape dynamically.
+ * @command_error_threshold: Number of times that software may retry sending a command.
+ */
+struct soundwire_link {
+ bool clock_stop_mode0_supported;
+ bool clock_stop_mode1_supported;
+ unsigned int max_clock_frequency;
+ size_t supported_clock_gears_count;
+ unsigned int supported_clock_gears[SOUNDWIRE_MAX];
+ size_t clock_frequencies_supported_count;
+ uint64_t clock_frequencies_supported[SOUNDWIRE_MAX];
+ unsigned int default_frame_rate;
+ unsigned int default_frame_row_size;
+ unsigned int default_frame_col_size;
+ bool dynamic_frame_shape;
+ unsigned int command_error_threshold;
+};
+
+/**
+ * struct soundwire_controller - SoundWire controller properties.
+ * @master_count: Number of masters present on this device.
+ * @master_list: One entry for each master device.
+ */
+struct soundwire_controller {
+ unsigned int master_list_count;
+ struct soundwire_link master_list[SOUNDWIRE_MAX_LINK];
+};
+
+/* SoundWire port bitmask, used for slave source/sink port list property. */
+#define SOUNDWIRE_PORT(port) BIT(port)
+
+/**
+ * struct soundwire_slave - SoundWire slave device properties.
+ * @wake_up_unavailable: Wake from this device is not supported or allowed.
+ * @test_mode_supported: %true if test mode is supported by this device.
+ * @clock_stop_mode1_supported: %true if clock stop mode1 is supported by this device.
+ * @simplified_clockstopprepare_sm_supported: %true if slave only supports the simplified
+ * clock stop prepare state machine and will
+ * always be ready for a stop clock transition.
+ * @clockstopprepare_timeout: Slave-specific timeout in milliseconds.
+ * @clockstopprepare_hard_reset_behavior: %true when slave keeps the status of the
+ * StopClockPrepare state machine after exit from
+ * mode1 and must be de-prepared by software.
+ * @slave_channelprepare_timeout: Slave-specific timeout in milliseconds.
+ * @highPHY_capable: %true if device is HighPHY capable.
+ * @paging_supported: %true if device implements paging registers.
+ * @bank_delay_supported: %true if device implements bank delay/bridge registers.
+ * @port15_read_behavior: %true if device supports read to Port15 alias.
+ * @master_count: Number of master links present on this slave.
+ * @source_port_list: Bitmap identifying supported source ports, starting at bit 1.
+ * @sink_port_list: Bitmap identifying supported sink ports, starting at bit 1.
+ */
+struct soundwire_slave {
+ bool wake_up_unavailable;
+ bool test_mode_supported;
+ bool clock_stop_mode1_supported;
+ bool simplified_clockstopprepare_sm_supported;
+ unsigned int clockstopprepare_timeout;
+ bool clockstopprepare_hard_reset_behavior;
+ unsigned int slave_channelprepare_timeout;
+ bool highPHY_capable;
+ bool paging_supported;
+ bool bank_delay_supported;
+ bool port15_read_behavior;
+ size_t master_count;
+ uint32_t source_port_list;
+ uint32_t sink_port_list;
+};
+
+/**
+ * enum soundwire_multilane_dir - Direction of lane in slave multilane device.
+ * @MASTER_LANE: Lane is connected to a master device.
+ * @SLAVE_LINK: Lane is connected to a slave device.
+ */
+enum soundwire_multilane_dir {
+ MASTER_LANE,
+ SLAVE_LINK,
+};
+
+/**
+ * struct soundwire_multilane_map - Pair a soundwire lane with direction.
+ * @lane: Slave device lane number.
+ * @direction: Direction of the slave lane.
+ * @connection: The connection that this lane makes.
+ */
+struct soundwire_multilane_map {
+ unsigned int lane;
+ enum soundwire_multilane_dir direction;
+ union lane_type {
+ unsigned int master_lane;
+ unsigned int slave_link;
+ } connection;
+};
+
+/**
+ * struct soundwire_multilane - Multi-Lane SoundWire slave device.
+ * @lane_mapping_count: Number of entries in lane_mapping.
+ * @lane_mapping: One entry for each lane that is connected to lanes on a master device or
+ * slave devices via a slave link. Lane 0 is always connected to the master
+ * and entry 0 in this array is ignored.
+ * @lane_bus_holder_count: Number of entries in lane_bus_holder.
+ * @lane_bus_holder: One entry for each lane, %true if the device behaves as a bus holder.
+ */
+struct soundwire_multilane {
+ size_t lane_mapping_count;
+ struct soundwire_multilane_map lane_mapping[SOUNDWIRE_MAX_LANE];
+ size_t lane_bus_holder_count;
+ bool lane_bus_holder[SOUNDWIRE_MAX_LANE];
+};
+
+/**
+ * enum soundwire_prepare_channel_behavior - Specifies the dependencies between the
+ * Channel Prepare sequence and bus clock config.
+ * @CHANNEL_PREPARE_ANY_FREQUENCY: Channel Prepare can happen at any bus clock rate.
+ * @CHANNEL_PREPARE_SUPPORTED_FREQUENCY: Channel Prepare sequence shall happen only after
+ * the bus clock is changed to a supported frequency.
+ */
+enum soundwire_prepare_channel_behavior {
+ CHANNEL_PREPARE_ANY_FREQUENCY,
+ CHANNEL_PREPARE_SUPPORTED_FREQUENCY
+};
+
+/**
+ * struct soundwire_audio_mode - Properties for each supported Audio Mode.
+ * @sdw_name: SoundWire device name for this audio mode device instance.
+ * @max_bus_frequency: Maximum bus frequency of this mode in Hz.
+ * @min_bus_frequency: Minimum bus frequency of this mode in Hz.
+ * @bus_frequency_configs_count: Number of entries in bus_frequency_configs.
+ * @bus_frequency_configs: One entry for each supported bus frequency,
+ * if not all values in min to max range are valid.
+ * @max_sampling_frequency: Maximum sampling frequency of this mode in Hz.
+ * @min_sampling_frequency: Minimum sampling frequency of this mode in Hz.
+ * @sampling_frequency_configs_count: Number of entries in sampling_frequency_configs.
+ * @sampling_frequency_configs: One entry for each supported sampling frequency,
+ * if not all values in min to max range are valid.
+ * @prepare_channel_behavior: Dependencies between Channel Prepare and bus clock.
+ * @glitchless_transitions: Bitmap describing possible glitchless transitions from this audio
+ * mode to another audio mode. Not used for only one mode.
+ */
+struct soundwire_audio_mode {
+ unsigned int max_bus_frequency;
+ unsigned int min_bus_frequency;
+ size_t bus_frequency_configs_count;
+ uint64_t bus_frequency_configs[SOUNDWIRE_MAX];
+ unsigned int max_sampling_frequency;
+ unsigned int min_sampling_frequency;
+ size_t sampling_frequency_configs_count;
+ uint64_t sampling_frequency_configs[SOUNDWIRE_MAX];
+ enum soundwire_prepare_channel_behavior prepare_channel_behavior;
+ uint32_t glitchless_transitions;
+};
+
+/* Type of SoundWire Data Port supported for this device. */
+enum soundwire_data_port_type {
+ FULL_DATA_PORT,
+ SIMPLIFIED_DATA_PORT,
+ REDUCED_DATA_PORT
+};
+
+/* Number of samples that can be grouped together (0-based count). */
+enum soundwire_block_group_count {
+ BLOCK_GROUP_COUNT_1,
+ BLOCK_GROUP_COUNT_2,
+ BLOCK_GROUP_COUNT_3,
+ BLOCK_GROUP_COUNT_4
+};
+
+/* Bitmap identifying the types of modes supported. */
+enum soundwire_mode_bitmap {
+ MODE_ISOCHRONOUS = BIT(0),
+ MODE_TX_CONTROLLED = BIT(1),
+ MODE_RX_CONTROLLED = BIT(2),
+ MODE_FULL_ASYNCHRONOUS = BIT(3)
+};
+
+/* Bitmap identifying the encoding schemes supported. */
+enum soundwire_port_encoding_bitmap {
+ ENCODE_TWOS_COMPLEMENT = BIT(0),
+ ENCODE_SIGN_MAGNITUDE = BIT(1),
+ ENCODE_IEEE_32BIT_FP = BIT(2)
+};
+
+/**
+ * struct soundwire_dpn - Configuration properties for SoundWire DPn Data Ports.
+ * @port_max_wordlength: Maximum number of bits in a Payload Channel Sample. (1-64)
+ * @port_min_wordlength: Minimum number of bits in a Payload Channel Sample. (1-64)
+ * @port_wordlength_configs_count: Number of entries in port_wordlength_configs.
+ * @port_wordlength_configs: One entry for each supported wordlength.
+ * Used if only specific wordlength values are allowed.
+ * @data_port_type: Type of data port from &enum soundwire_data_port_type.
+ * @max_grouping_supported: 0-based maximum number of samples that can be grouped for
+ * %FULL_DATA_PORT. The %SIMPLIFIED_DATA_PORT and %REDUCED_DATA_PORT
+ * require 4 samples in a group.
+ * @simplified_channelprepare_sm: %true if the channel prepare sequence is not required,
+ * and the Port Ready interrupt is not supported.
+ * @port_channelprepare_timeout: Port-specific timeout value in milliseconds.
+ * @imp_def_dpn_interrupts_supported: Bitmap for support of implementation-defined interrupts.
+ * @min_channel_number: Minimum channel number supported.
+ * @max_channel_number: Maximum channel number supported.
+ * @channel_number_list_count: Number of entries in channel_number_list.
+ * @channel_number_list: One entry for each available channel number.
+ * Used if only specific channels are available.
+ * @channel_combination_list_count: Number of entries in channel_combination_list.
+ * @channel_combination_list: One bitmap entry for each valid channel combination.
+ * @modes_supported: Bitmap identifying the types of modes supported by the device.
+ * @max_async_buffer: Number of samples that this port can buffer in asynchronous modes.
+ * Only required if the slave implements buffer larger than required.
+ * @block_packing_mode: %true if BlockPackingMode may be configured as BlockPerPort or
+ * BlocKPerChannel. %false if BlockPackingMode must be BlockPerPort.
+ * @port_encoding_type: Bitmap describing the types of Payload Channel Sample encoding
+ * schemes implemented by this port.
+ * @port_audio_mode_count: Number of entries in audio_mode_list.
+ * @port_audio_mode_list: One entry for each supported audio mode id.
+ */
+struct soundwire_dpn {
+ unsigned int port_max_wordlength;
+ unsigned int port_min_wordlength;
+ size_t port_wordlength_configs_count;
+ uint64_t port_wordlength_configs[SOUNDWIRE_MAX];
+ enum soundwire_data_port_type data_port_type;
+ enum soundwire_block_group_count max_grouping_supported;
+ bool simplified_channelprepare_sm;
+ unsigned int port_channelprepare_timeout;
+ uint32_t imp_def_dpn_interrupts_supported;
+ unsigned int min_channel_number;
+ unsigned int max_channel_number;
+ size_t channel_number_list_count;
+ uint64_t channel_number_list[SOUNDWIRE_MAX];
+ size_t channel_combination_list_count;
+ uint64_t channel_combination_list[SOUNDWIRE_MAX];
+ enum soundwire_mode_bitmap modes_supported;
+ unsigned int max_async_buffer;
+ bool block_packing_mode;
+ uint32_t port_encoding_type;
+ size_t port_audio_mode_count;
+ unsigned int port_audio_mode_list[SOUNDWIRE_MAX_MODE];
+};
+
+/**
+ * struct soundwire_bra_mode - Bulk Register Access mode properties.
+ * @max_bus_frequency: Maximum bus frequency of this mode in Hz.
+ * @min_bus_frequency: Minimum bus frequency of this mode in Hz.
+ * @bus_frequency_configs_count: Number of entries in bus_frequency_configs.
+ * @bus_frequency_configs: One entry for each supported bus frequency,
+ * Used if not all values in min to max range are valid.
+ * @max_data_per_frame: Maximum data bytes per frame, excluding header, CRC, and footer.
+ * @min_us_between_transactions: Amount of delay in uS required between transactions.
+ * @max_bandwidth: Maximum bandwidth in bytes per second that can be written/read.
+ * @block_alignment: Size of basic block in bytes.
+ */
+struct soundwire_bra_mode {
+ unsigned int max_bus_frequency;
+ unsigned int min_bus_frequency;
+ size_t bus_frequency_configs_count;
+ uint64_t bus_frequency_configs[SOUNDWIRE_MAX];
+ unsigned int max_data_per_frame;
+ unsigned int min_us_between_transactions;
+ unsigned int max_bandwidth;
+ unsigned int block_alignment;
+};
+
+/**
+ * struct soundwire_dp0 - Configuration properties for SoundWire DP0 Data Port.
+ * @port_max_wordlength: Maximum number of bits in a Payload Channel Sample. (1-64)
+ * @port_min_wordlength: Minimum number of bits in a Payload Channel Sample. (1-64)
+ * @port_wordlength_configs_count: Number of entries in port_wordlength_configs.
+ * @port_wordlength_configs: One entry for each supported wordlength.
+ * Used if only specific wordlength values are allowed.
+ * @bra_flow_controlled: Used if the slave can result in an OK_NotReady response.
+ * @bra_imp_def_response_supported: %true if implementation defined response is supported.
+ * @bra_role_supported: %true if the slave supports initiating BRA transactions.
+ * @simplified_channel_prepare_sm: %true if the channel prepare sequence is not required,
+ * and the Port Ready interrupt is not supported.
+ * @imp_def_dp0_interrupts_supported: If set, each bit corresponds to support for
+ * implementation-defined interrupts ImpDef.
+ * @imp_def_bpt_supported: %true if implementation defined Payload Type is supported.
+ * @bra_mode_count: Number of entries in bra_mode_list.
+ * @bra_mode_list: One entry for each supported Bulk Register Access mode id.
+ */
+struct soundwire_dp0 {
+ unsigned int port_max_wordlength;
+ unsigned int port_min_wordlength;
+ size_t port_wordlength_configs_count;
+ uint64_t port_wordlength_configs[SOUNDWIRE_MAX];
+ bool bra_flow_controlled;
+ bool bra_imp_def_response_supported;
+ bool bra_role_supported;
+ bool simplified_channel_prepare_sm;
+ unsigned int imp_def_dp0_interrupts_supported;
+ bool imp_def_bpt_supported;
+ size_t bra_mode_count;
+ unsigned int bra_mode_list[SOUNDWIRE_MAX_MODE];
+};
+
+/**
+ * struct soundwire_dpn_entry - Full duplex data port properties for DPn 1-14.
+ * @port: DPn data port number, starting at 1.
+ * @source: Source data port properties. (optional)
+ * @sink: Sink data port properties. (optional)
+ */
+struct soundwire_dpn_entry {
+ size_t port;
+ struct soundwire_dpn *source;
+ struct soundwire_dpn *sink;
+};
+
+/**
+ * struct soundwire_codec - Contains all configuration for a SoundWire codec slave device.
+ * @slave: Properties for slave device.
+ * @audio_mode: Properties for audio modes used by DPn data ports 1-14.
+ * @dpn: Properties for DPn data ports 1-14.
+ * @dp0_bra_mode: Properties for Bulk Register Access mode for data port 0. (optional)
+ * @dp0: Properties for data port 0. (optional)
+ * @multilane: Properties for slave multilane device. (optional)
+ */
+struct soundwire_codec {
+ struct soundwire_slave *slave;
+ struct soundwire_audio_mode *audio_mode[SOUNDWIRE_MAX_MODE];
+ struct soundwire_dpn_entry dpn[SOUNDWIRE_MAX_DPN - SOUNDWIRE_MIN_DPN];
+ struct soundwire_bra_mode *dp0_bra_mode[SOUNDWIRE_MAX_MODE];
+ struct soundwire_dp0 *dp0;
+ struct soundwire_multilane *multilane;
+};
+
+#endif /* __DEVICE_SOUNDWIRE_H__ */