summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/southbridge/amd/amd8111/usb2.c2
-rw-r--r--src/southbridge/amd/amd8131/bridge.c2
-rw-r--r--src/southbridge/amd/amd8132/bridge.c2
-rw-r--r--src/southbridge/amd/cs5535/chipsetinit.c4
-rw-r--r--src/southbridge/amd/cs5535/cs5535.c2
-rw-r--r--src/southbridge/amd/cs5536/cs5536.c2
-rw-r--r--src/southbridge/amd/sr5650/early_setup.c6
-rw-r--r--src/southbridge/amd/sr5650/pcie.c10
-rw-r--r--src/southbridge/amd/sr5650/sr5650.c2
-rw-r--r--src/southbridge/amd/sr5650/sr5650.h2
10 files changed, 17 insertions, 17 deletions
diff --git a/src/southbridge/amd/amd8111/usb2.c b/src/southbridge/amd/amd8111/usb2.c
index 89115c3bbe..7a354d6c22 100644
--- a/src/southbridge/amd/amd8111/usb2.c
+++ b/src/southbridge/amd/amd8111/usb2.c
@@ -1,4 +1,4 @@
-//2003 Copywright Tyan
+//2003 Copyright Tyan
#include <console/console.h>
#include <device/device.h>
diff --git a/src/southbridge/amd/amd8131/bridge.c b/src/southbridge/amd/amd8131/bridge.c
index d258450a06..e638fae74d 100644
--- a/src/southbridge/amd/amd8131/bridge.c
+++ b/src/southbridge/amd/amd8131/bridge.c
@@ -143,7 +143,7 @@ static void amd8131_pcix_tune_dev(device_t dev, void *ptr)
if (max_read > limit_read) {
max_read = limit_read;
}
- /* Look at the read size and the nubmer of siblings
+ /* Look at the read size and the number of siblings
* and compute how many outstanding transactions I can have.
*/
if (max_read == 2) {
diff --git a/src/southbridge/amd/amd8132/bridge.c b/src/southbridge/amd/amd8132/bridge.c
index 88e421e7cc..eecb11b0e8 100644
--- a/src/southbridge/amd/amd8132/bridge.c
+++ b/src/southbridge/amd/amd8132/bridge.c
@@ -263,7 +263,7 @@ static void amd8132_pcix_init(device_t dev)
pci_write_config32(dev, 0x48, dword);
dword = pci_read_config32(dev, 0x4c);
- dword |= (1<<6); //intial prefetch for memory read line request
+ dword |= (1<<6); //Initial prefetch for memory read line request
dword |= (1<<9); //continuous prefetch Enable for memory read line request
pci_write_config32(dev, 0x4c, dword);
diff --git a/src/southbridge/amd/cs5535/chipsetinit.c b/src/southbridge/amd/cs5535/chipsetinit.c
index fd4c4ba440..ab1b640a44 100644
--- a/src/southbridge/amd/cs5535/chipsetinit.c
+++ b/src/southbridge/amd/cs5535/chipsetinit.c
@@ -116,7 +116,7 @@ static void pmChipsetInit(void)
/* GPIO24 is setup in preChipsetInit for two reasons
* 1. GPIO24 at reset defaults to disabled, since this signal is
* vsb_work_aux on Hawk it controls the FET's for all voltage
- * rails except Vstanby & Vmem. BIOS needs to enable GPIO24 as
+ * rails except Vstandby & Vmem. BIOS needs to enable GPIO24 as
* OUT_AUX1 & OUTPUT_EN early so it is driven by 5535.
* 2. Non-PM builds will require GPIO24 enabled for instant-off power
* button
@@ -127,7 +127,7 @@ static void pmChipsetInit(void)
* On Hawk, GPIO11 is connected to control input of external clock
* generator for 14MHz, PCI, USB & LPC clocks.
* Programming of GPIO11 will be done by VSA PM code. During VSA
- * Init. BIOS writes PM Core Virual Register indicating if S1 Clocks
+ * Init. BIOS writes PM Core Virtual Register indicating if S1 Clocks
* should be On or Off. This is based on a Setup item. We do not want
* to leave GPIO11 enabled because of a Hawk board problem. With
* GPIO11 enabled in S3, something is back-driving GPIO11 causing it
diff --git a/src/southbridge/amd/cs5535/cs5535.c b/src/southbridge/amd/cs5535/cs5535.c
index 42707c049c..e66a1e2926 100644
--- a/src/southbridge/amd/cs5535/cs5535.c
+++ b/src/southbridge/amd/cs5535/cs5535.c
@@ -20,7 +20,7 @@ static void nvram_on(struct device *dev)
pci_write_config8(dev, 0x52, 0xee);
/* Set positive decode on ROM */
- /* Also, there is no apparent reason to turn off the devoce on the */
+ /* Also, there is no apparent reason to turn off the device on the */
/* IDE devices */
reg = pci_read_config8(dev, 0x5b);
diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c
index 1f7eab87ad..3d873d0d8f 100644
--- a/src/southbridge/amd/cs5536/cs5536.c
+++ b/src/southbridge/amd/cs5536/cs5536.c
@@ -447,7 +447,7 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
bar = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
- /* Make HCCPARAMS writeable */
+ /* Make HCCPARAMS writable */
write32(bar + IPREG04, read32(bar + IPREG04) | USB_HCCPW_SET);
/* ; EECP=50h, IST=01h, ASPC=1 */
diff --git a/src/southbridge/amd/sr5650/early_setup.c b/src/southbridge/amd/sr5650/early_setup.c
index e8fb9561f7..64c69e5e00 100644
--- a/src/southbridge/amd/sr5650/early_setup.c
+++ b/src/southbridge/amd/sr5650/early_setup.c
@@ -229,11 +229,11 @@ void sr5650_htinit(void)
set_htiu_enable_bits(sr5650_f0, 0x2A, 0x3, 0x1);
/* Enables error-retry mode */
set_nbcfg_enable_bits(sr5650_f0, 0x44, 0x1, 0x1);
- /* Enables scrambling and Disalbes command throttling */
+ /* Enables scrambling and Disables command throttling */
set_nbcfg_enable_bits(sr5650_f0, 0xac, (1 << 3) | (1 << 14), (1 << 3) | (1 << 14));
/* Enables transmitter de-emphasis */
set_nbcfg_enable_bits(sr5650_f0, 0xa4, 1 << 31, 1 << 31);
- /* Enabels transmitter de-emphasis level */
+ /* Enables transmitter de-emphasis level */
/* Sets training 0 time */
set_nbcfg_enable_bits(sr5650_f0, 0xa0, 0x3F, 0x14);
@@ -258,7 +258,7 @@ void sr5650_htinit(void)
set_fam10_ext_cfg_enable_bits(cpu_f0, 0x168, 1 << 10, 1 << 10);
/* Sets Training 0 Time. See T0Time table for encodings */
- /* AGESA have set it to recommanded value already
+ /* AGESA have set it to recommended value already
* The recommended values are 14h(2us) if F0x[18C:170][LS2En]=0
* and 26h(12us) if F0x[18C:170][LS2En]=1
*/
diff --git a/src/southbridge/amd/sr5650/pcie.c b/src/southbridge/amd/sr5650/pcie.c
index 809675c851..51873bfbf7 100644
--- a/src/southbridge/amd/sr5650/pcie.c
+++ b/src/southbridge/amd/sr5650/pcie.c
@@ -589,8 +589,8 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
For Hot-Plug Slots: Advertise TX L0s and L1 exit latency.
TX L0s exit latency to be 110b: 2us to 4us.
L1 exit latency to be 111b: more than 64us.*/
- //set_pcie_enable_bits(dev, 0xC1, 0xF << 0, 0xC << 0); /* 0xF for htplg. */
- set_pcie_enable_bits(dev, 0xC1, 0xF << 0, 0xF << 0); /* 0xF for htplg. */
+ //set_pcie_enable_bits(dev, 0xC1, 0xF << 0, 0xC << 0); /* 0xF for hotplug. */
+ set_pcie_enable_bits(dev, 0xC1, 0xF << 0, 0xF << 0); /* 0xF for hotplug. */
/* 4.4.2.step13.17. Always ACK an ASPM L1 entry DLLP to
workaround credit control issue on PM_NAK
message of SB700 and SB800. */
@@ -690,7 +690,7 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
case 13:
/* 4.4.2.step13.5. Blocks DMA traffic during C3 state */
set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0);
- /* Enabels TLP flushing */
+ /* Enables TLP flushing */
set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
/* check port enable */
@@ -724,7 +724,7 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
/* Set Slot present 0x5A*/
pci_ext_write_config32(nb_dev, dev, 0x58, 1 << 24, 1 << 24);
- //PCIE-GPP1 TXCLK Clock Gating In L1 Late Core sttting - Maybe move somewhere else? */
+ //PCIE-GPP1 TXCLK Clock Gating In L1 Late Core setting - Maybe move somewhere else? */
set_pcie_enable_bits(nb_dev, 0x11 | gpp_sb_sel, 0xF << 0, 0x0C << 0);
/* Enable powering down PLLs in L1 or L23 Ready states.
* Turns off PHY`s RX FRONTEND during L1 when PLL power down is enabled */
@@ -800,7 +800,7 @@ void config_gpp_core(device_t nb_dev, device_t sb_dev)
reg = nbmisc_read_index(nb_dev, 0x8);
reg |= (1 << 31) | (1 << 15) | (1 << 13); //asserts
nbmisc_write_index(nb_dev, 0x8, reg);
- reg &= ~((1 << 31) | (1 << 15) | (1 << 13)); //De-aserts
+ reg &= ~((1 << 31) | (1 << 15) | (1 << 13)); //De-asserts
nbmisc_write_index(nb_dev, 0x8, reg);
reg = nbmisc_read_index(nb_dev, 0x67); /* get STRAP_BIF_LINK_CONFIG at bit 0-4 */
diff --git a/src/southbridge/amd/sr5650/sr5650.c b/src/southbridge/amd/sr5650/sr5650.c
index 2a2d558a70..84d6d9af0c 100644
--- a/src/southbridge/amd/sr5650/sr5650.c
+++ b/src/southbridge/amd/sr5650/sr5650.c
@@ -410,7 +410,7 @@ void sr5650_enable(device_t dev)
(dev->enabled ? 0 : 1) << (7 + dev_ind));
if (dev->enabled)
sr5650_gpp_sb_init(nb_dev, dev, dev_ind);
- /* Dont call disable_pcie_bar3(nb_dev) here, otherwise the screen will crash. */
+ /* Don't call disable_pcie_bar3(nb_dev) here, otherwise the screen will crash. */
break;
case 11:
case 12: /* bus 0, dev 11,12, GPP2 */
diff --git a/src/southbridge/amd/sr5650/sr5650.h b/src/southbridge/amd/sr5650/sr5650.h
index 85f85a1a5e..44243edb48 100644
--- a/src/southbridge/amd/sr5650/sr5650.h
+++ b/src/southbridge/amd/sr5650/sr5650.h
@@ -90,7 +90,7 @@ typedef struct __PCIE_CFG__ {
* ------------------------------------------------- */
extern PCIE_CFG AtiPcieCfg;
-/* ----------------- export funtions ----------------- */
+/* ----------------- export functions ----------------- */
u32 nbpcie_p_read_index(device_t dev, u32 index);
void nbpcie_p_write_index(device_t dev, u32 index, u32 data);
u32 nbpcie_ind_read_index(device_t nb_dev, u32 index);