summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/tyan/s2891/Config.lb345
-rw-r--r--src/mainboard/tyan/s2891/Options.lb4
-rw-r--r--src/mainboard/tyan/s2891/auto.c57
-rw-r--r--src/mainboard/tyan/s2891/cache_as_ram_auto.c206
-rw-r--r--src/mainboard/tyan/s2891/failover.c1
-rw-r--r--src/mainboard/tyan/s2891/get_bus_conf.c53
-rw-r--r--src/mainboard/tyan/s2891/irq_tables.c132
-rw-r--r--src/mainboard/tyan/s2891/mptable.c138
-rw-r--r--src/mainboard/tyan/s2891/resourcemap.c9
-rw-r--r--src/mainboard/tyan/s2892/Config.lb404
-rw-r--r--src/mainboard/tyan/s2892/Options.lb9
-rw-r--r--src/mainboard/tyan/s2892/auto.c56
-rw-r--r--src/mainboard/tyan/s2892/cache_as_ram_auto.c215
-rw-r--r--src/mainboard/tyan/s2892/get_bus_conf.c47
-rw-r--r--src/mainboard/tyan/s2892/irq_tables.c122
-rw-r--r--src/mainboard/tyan/s2892/mptable.c161
-rw-r--r--src/mainboard/tyan/s2892/resourcemap.c9
-rw-r--r--src/mainboard/tyan/s2895/Config.lb447
-rw-r--r--src/mainboard/tyan/s2895/Options.lb4
-rw-r--r--src/mainboard/tyan/s2895/auto.c79
-rw-r--r--src/mainboard/tyan/s2895/cache_as_ram_auto.c250
-rw-r--r--src/mainboard/tyan/s2895/failover.c2
-rw-r--r--src/mainboard/tyan/s2895/get_bus_conf.c112
-rw-r--r--src/mainboard/tyan/s2895/irq_tables.c136
-rw-r--r--src/mainboard/tyan/s2895/mptable.c168
25 files changed, 1438 insertions, 1728 deletions
diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb
index 90164c7ccb..51b764d677 100644
--- a/src/mainboard/tyan/s2891/Config.lb
+++ b/src/mainboard/tyan/s2891/Config.lb
@@ -14,9 +14,9 @@ end
## Compute the start location and size size of
## The coreboot bootloader.
##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-default CONFIG_ROM_PAYLOAD = 1
+default CONFIG_ROM_PAYLOAD = 1
##
## Compute where this copy of coreboot will start in the boot rom
@@ -33,7 +33,7 @@ default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
default XIP_ROM_SIZE=65536
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-arch i386 end
+arch i386 end
##
@@ -53,46 +53,42 @@ if HAVE_PIRQ_TABLE object irq_tables.o end
if USE_DCACHE_RAM
- if CONFIG_USE_INIT
-
- makerule ./auto.o
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
- end
-
- else
-
- makerule ./auto.inc
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
- action "perl -e 's/.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/.text/.section .rom.text/g' -pi $@"
- end
-
+if CONFIG_USE_INIT
+ makerule ./auto.o
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
end
else
+ makerule ./auto.inc
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
+end
+else
##
## Romcc output
##
makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+ depends "$(MAINBOARD)/failover.c ../romcc"
+ action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
end
makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+ depends "$(MAINBOARD)/failover.c ../romcc"
+ action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
end
makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+ depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
+ action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+ depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
+ action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
end
@@ -101,13 +97,12 @@ end
## Build our 16 bit and 32 bit coreboot entry code
##
if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
end
mainboardinit cpu/x86/32bit/entry32.inc
-
if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
@@ -121,12 +116,12 @@ end
##
## Build our reset vector (This is where coreboot is entered)
##
-if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
if USE_DCACHE_RAM
@@ -157,7 +152,7 @@ if USE_DCACHE_RAM
end
###
-### This is the early phase of coreboot startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
@@ -195,171 +190,169 @@ else
end
-
##
-## Include the secondary Configuration files
+## Include the secondary Configuration files
##
if CONFIG_CHIP_NAME
- config chip.h
+ config chip.h
end
-
# sample config for tyan/s2891
chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
-
+ device apic_cluster 0 on
+ chip cpu/amd/socket_940
+ device apic 0 on end
+ end
+ end
device pci_domain 0 on
chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/ck804
+ device pci 18.0 on # northbridge
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/nvidia/ck804
device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b off # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
+ device pci 1.0 on # LPC
+ chip superio/winbond/w83627hf
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.6 off # CIR
+ io 0x60 = 0x100
+ end
+ device pnp 2e.7 off # GAME_MIDI_GIPO1
+ io 0x60 = 0x220
+ io 0x62 = 0x300
+ irq 0x70 = 9
+ end
+ device pnp 2e.8 off end # GPIO2
+ device pnp 2e.9 off end # GPIO3
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b off # HW Monitor
+ io 0x60 = 0x290
+ irq 0x70 = 5
+ end
+ end
end
- device pci 1.1 on # SM 0
-# chip drivers/generic/generic #dimm 0-0-0
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #dimm 0-0-1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #dimm 0-1-0
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #dimm 0-1-1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #dimm 1-0-0
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #dimm 1-0-1
-# device i2c 55 on end
-# end
-# chip drivers/generic/generic #dimm 1-1-0
-# device i2c 56 on end
-# end
-# chip drivers/generic/generic #dimm 1-1-1
-# device i2c 57 on end
-# end
- end # SM
-# device pci 1.1 on # SM 1
+ device pci 1.1 on # SM 0
+# chip drivers/generic/generic #dimm 0-0-0
+# device i2c 50 on end
+# end
+# chip drivers/generic/generic #dimm 0-0-1
+# device i2c 51 on end
+# end
+# chip drivers/generic/generic #dimm 0-1-0
+# device i2c 52 on end
+# end
+# chip drivers/generic/generic #dimm 0-1-1
+# device i2c 53 on end
+# end
+# chip drivers/generic/generic #dimm 1-0-0
+# device i2c 54 on end
+# end
+# chip drivers/generic/generic #dimm 1-0-1
+# device i2c 55 on end
+# end
+# chip drivers/generic/generic #dimm 1-1-0
+# device i2c 56 on end
+# end
+# chip drivers/generic/generic #dimm 1-1-1
+# device i2c 57 on end
+# end
+ end # SM
+# device pci 1.1 on # SM 1
# chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4
-# device i2c 2d on end
-# end
-# chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5
-# device i2c 2e on end
-# end
-# chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN
-# device i2c 2a on end
-# end
-# chip drivers/generic/generic # Winbond HWM 0x92
-# device i2c 49 on end
-# end
-# chip drivers/generic/generic # Winbond HWM 0x94
-# device i2c 4a on end
-# end
+# device i2c 2d on end
+# end
+# chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5
+# device i2c 2e on end
+# end
+# chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN
+# device i2c 2a on end
+# end
+# chip drivers/generic/generic # Winbond HWM 0x92
+# device i2c 49 on end
+# end
+# chip drivers/generic/generic # Winbond HWM 0x94
+# device i2c 4a on end
+# end
# end #SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 off end # ACI
- device pci 4.1 off end # MCI
- device pci 6.0 on end # IDE
- device pci 7.0 on end # SATA 1
- device pci 8.0 on end # SATA 0
- device pci 9.0 on # PCI
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 off end # ACI
+ device pci 4.1 off end # MCI
+ device pci 6.0 on end # IDE
+ device pci 7.0 on end # SATA 1
+ device pci 8.0 on end # SATA 0
+ device pci 9.0 on # PCI
# chip drivers/ati/ragexl
- chip drivers/pci/onboard
- device pci 7.0 on end
- #register "rom_address" = "0xfff80000" #for 512K
- register "rom_address" = "0xfff00000" #for 1M
- end
+ chip drivers/pci/onboard
+ device pci 7.0 on end
+ #register "rom_address" = "0xfff80000" #for 512K
+ register "rom_address" = "0xfff00000" #for 1M
+ end
end
- device pci a.0 off end # NIC
- device pci b.0 off end # PCI E 3
- device pci c.0 off end # PCI E 2
- device pci d.0 on end # PCI E 1
- device pci e.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
+ device pci a.0 off end # NIC
+ device pci b.0 off end # PCI E 3
+ device pci c.0 off end # PCI E 2
+ device pci d.0 on end # PCI E 1
+ device pci e.0 on end # PCI E 0
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
end
- end # device pci 18.0
+ end # device pci 18.0
device pci 18.0 on end # Link 1
device pci 18.0 on
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on
- chip drivers/pci/onboard
- device pci 9.0 on end
+ # devices on link 2, link 2 == LDT 2
+ chip southbridge/amd/amd8131
+ # the on/off keyword is mandatory
+ device pci 0.0 on end
+ device pci 0.1 on end
+ device pci 1.0 on
+ chip drivers/pci/onboard
+ device pci 9.0 on end
device pci 9.1 on end
- end
+ end
end
- device pci 1.1 on end
- end
+ device pci 1.1 on end
+ end
end # device pci 18.0
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end #mc0
-
+
end # pci_domain
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 off end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 off end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 off end # pci_regs_all
+# device pnp 0.2 off end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 off end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
# device pnp 0.8 on end # hard_reset
-# end
+# end
end # root_complex
diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb
index 8513e049fb..bd3b695671 100644
--- a/src/mainboard/tyan/s2891/Options.lb
+++ b/src/mainboard/tyan/s2891/Options.lb
@@ -30,9 +30,9 @@ uses USE_OPTION_TABLE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
+uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
-uses MAINBOARD
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
@@ -75,7 +75,6 @@ uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_LB_MEM_TOPK
-
## ROM_SIZE is the size of boot ROM that this board will use.
#512K bytes
default ROM_SIZE=524288
@@ -83,7 +82,6 @@ default ROM_SIZE=524288
#1M bytes
#default ROM_SIZE=1048576
-
##
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
diff --git a/src/mainboard/tyan/s2891/auto.c b/src/mainboard/tyan/s2891/auto.c
index c8747a88cb..e264f366b1 100644
--- a/src/mainboard/tyan/s2891/auto.c
+++ b/src/mainboard/tyan/s2891/auto.c
@@ -1,5 +1,5 @@
#define ASSEMBLY 1
-
+
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
@@ -33,20 +33,20 @@
static void hard_reset(void)
{
- set_bios_reset();
+ set_bios_reset();
- /* full reset */
+ /* full reset */
outb(0x0a, 0x0cf9);
- outb(0x0e, 0x0cf9);
+ outb(0x0e, 0x0cf9);
}
static void soft_reset(void)
{
- set_bios_reset();
+ set_bios_reset();
#if 1
- /* link reset */
+ /* link reset */
outb(0x02, 0x0cf9);
- outb(0x06, 0x0cf9);
+ outb(0x06, 0x0cf9);
#endif
}
@@ -69,15 +69,14 @@ static inline int spd_read_byte(unsigned device, unsigned address)
}
#define QRANK_DIMM_SUPPORT 1
-
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
- /* tyan does not want the default */
-#include "resourcemap.c"
+/* tyan does not want the default */
+#include "resourcemap.c"
-#define FIRST_CPU 1
+#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -112,38 +111,36 @@ static void main(unsigned long bist)
#endif
};
- int needs_reset;
+ int needs_reset;
#if CONFIG_LOGICAL_CPUS==1
- struct node_core_id id;
+ struct node_core_id id;
#else
- unsigned nodeid;
+ unsigned nodeid;
#endif
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
+ if (bist == 0) {
+ k8_init_and_stop_secondaries();
+ }
+
+ w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
- // post_code(0x32);
-
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- setup_s2891_resource_map();
+ setup_s2891_resource_map();
needs_reset = setup_coherent_ht_domain();
-
+
needs_reset |= ht_setup_chains_x();
- needs_reset |= ck804_early_setup_x();
+ needs_reset |= ck804_early_setup_x();
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ soft_reset();
+ }
enable_smbus();
diff --git a/src/mainboard/tyan/s2891/cache_as_ram_auto.c b/src/mainboard/tyan/s2891/cache_as_ram_auto.c
index aceffc33fa..78a2bb1ac8 100644
--- a/src/mainboard/tyan/s2891/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2891/cache_as_ram_auto.c
@@ -8,7 +8,6 @@
#define SET_NB_CFG_54 1
#endif
-
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
@@ -21,17 +20,6 @@
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
-#if 0
-static void post_code(uint8_t value) {
-#if 1
- int i;
- for(i=0;i<0x80000;i++) {
- outb(value, 0x80);
- }
-#endif
-}
-#endif
-
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/incoherent_ht.c"
@@ -54,7 +42,6 @@ static void post_code(uint8_t value) {
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
static void memreset_setup(void)
{
}
@@ -78,7 +65,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "sdram/generic_sdram.c"
/* tyan does not want the default */
-#include "resourcemap.c"
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
@@ -92,7 +79,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
#if USE_FALLBACK_IMAGE == 1
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
@@ -101,28 +87,28 @@ static inline int spd_read_byte(unsigned device, unsigned address)
static void sio_setup(void)
{
- unsigned value;
- uint32_t dword;
- uint8_t byte;
-
- /* subject decoding*/
- byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-
- /* LPC Positive Decode 0 */
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
- /* Serial 0, Serial 1 */
- dword |= (1<<0) | (1<<1);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
-#if 1
- /* s2891 has onboard LPC port 80 */
- /*Hope I can enable port 80 here
- It will decode port 80 to LPC, If you are using PCI post code you can not do this */
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4);
- dword |= (1<<16);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
+
+ /* subject decoding*/
+ byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
+
+ /* LPC Positive Decode 0 */
+ dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
+ /* Serial 0, Serial 1 */
+ dword |= (1<<0) | (1<<1);
+ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
+
+#if 1
+ /* s2891 has onboard LPC port 80 */
+ /*Hope I can enable port 80 here
+ It will decode port 80 to LPC, If you are using PCI post code you can not do this */
+ dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4);
+ dword |= (1<<16);
+ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
#endif
@@ -130,48 +116,48 @@ static void sio_setup(void)
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
+ unsigned last_boot_normal_x = last_boot_normal();
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the ck804 */
+ ck804_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+// post_code(0x22);
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) , "b" (cpu_init_detectedx)/* inputs */
- );
+// post_code(0x23);
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
+ );
fallback_image:
-// post_code(0x25);
+// post_code(0x25);
;
}
#endif
@@ -182,71 +168,71 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
+ failover_process(bist, cpu_init_detectedx);
#endif
- real_main(bist, cpu_init_detectedx);
+ real_main(bist, cpu_init_detectedx);
}
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- (0xa<<3)|0, (0xa<<3)|2, 0, 0,
- (0xa<<3)|1, (0xa<<3)|3, 0, 0,
+ (0xa<<3)|0, (0xa<<3)|2, 0, 0,
+ (0xa<<3)|1, (0xa<<3)|3, 0, 0,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
- (0xa<<3)|4, (0xa<<3)|6, 0, 0,
- (0xa<<3)|5, (0xa<<3)|7, 0, 0,
+ (0xa<<3)|4, (0xa<<3)|6, 0, 0,
+ (0xa<<3)|5, (0xa<<3)|7, 0, 0,
#endif
};
- int needs_reset;
- unsigned bsp_apicid = 0;
+ int needs_reset;
+ unsigned bsp_apicid = 0;
- struct mem_controller ctrl[8];
- unsigned nodes;
+ struct mem_controller ctrl[8];
+ unsigned nodes;
- if (bist == 0) {
- bsp_apicid = init_cpus(cpu_init_detectedx);
- }
+ if (bist == 0) {
+ bsp_apicid = init_cpus(cpu_init_detectedx);
+ }
// post_code(0x32);
-
+
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
+ uart_init();
+ console_init();
+
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- setup_s2891_resource_map();
+ setup_s2891_resource_map();
#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 0));
+ dump_pci_device(PCI_DEV(0, 0x18, 0));
dump_pci_device(PCI_DEV(0, 0x19, 0));
#endif
needs_reset = setup_coherent_ht_domain();
- wait_all_core0_started();
+ wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
- wait_all_other_cores_started(bsp_apicid);
+ // It is said that we should start core1 after all core0 launched
+ start_other_cores();
+ wait_all_other_cores_started(bsp_apicid);
#endif
- needs_reset |= ht_setup_chains_x();
+ needs_reset |= ht_setup_chains_x();
- needs_reset |= ck804_early_setup_x();
+ needs_reset |= ck804_early_setup_x();
- if (needs_reset) {
- print_info("ht reset -\r\n");
-// soft_reset();
- }
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ // soft_reset();
+ }
- allow_all_aps_stop(bsp_apicid);
+ allow_all_aps_stop(bsp_apicid);
- nodes = get_nodes();
- //It's the time to set ctrl now;
- fill_mem_ctrl(nodes, ctrl, spd_addr);
+ nodes = get_nodes();
+ //It's the time to set ctrl now;
+ fill_mem_ctrl(nodes, ctrl, spd_addr);
enable_smbus();
#if 0
@@ -260,7 +246,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
sdram_initialize(nodes, ctrl);
#if 0
- print_pci_devices();
+ print_pci_devices();
#endif
#if 0
diff --git a/src/mainboard/tyan/s2891/failover.c b/src/mainboard/tyan/s2891/failover.c
index 1ec4137b5a..1d85c0129b 100644
--- a/src/mainboard/tyan/s2891/failover.c
+++ b/src/mainboard/tyan/s2891/failover.c
@@ -91,7 +91,6 @@ static unsigned long main(unsigned long bist)
: "a" (bist) /* inputs */
: /* clobbers */
);
-
fallback_image:
return bist;
}
diff --git a/src/mainboard/tyan/s2891/get_bus_conf.c b/src/mainboard/tyan/s2891/get_bus_conf.c
index 8093f96332..1f8c8fe244 100644
--- a/src/mainboard/tyan/s2891/get_bus_conf.c
+++ b/src/mainboard/tyan/s2891/get_bus_conf.c
@@ -25,9 +25,9 @@
unsigned apicid_ck804;
unsigned apicid_8131_1;
unsigned apicid_8131_2;
-
-unsigned pci1234x[] =
+
+unsigned pci1234x[] =
{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
0x0000000,
@@ -39,7 +39,7 @@ unsigned pci1234x[] =
// 0x0000ff0,
// 0x0000ff0
};
-unsigned hcdnx[] =
+unsigned hcdnx[] =
{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
0x20202020,
0x20202020,
@@ -62,9 +62,9 @@ void get_bus_conf(void)
{
unsigned apicid_base;
+ unsigned sbdn;
device_t dev;
- unsigned sbdn;
int i;
if(get_bus_conf_done==1) return; //do it only once
@@ -78,7 +78,7 @@ void get_bus_conf(void)
}
get_sblk_pci1234();
-
+
sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
sbdn = sysconf.sbdn;
@@ -91,52 +91,16 @@ void get_bus_conf(void)
dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0));
if (dev) {
bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if 0
- bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804_2++;
-#else
bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
bus_ck804_4++;
-#endif
}
else {
printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09);
bus_ck804_1 = 2;
-#if 0
- bus_ck804_2 = 3;
-#else
bus_ck804_4 = 3;
-#endif
-
- }
-#if 0
- dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0));
- if (dev) {
- bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804_3++;
- }
- else {
- printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b);
-
- bus_ck804_3 = bus_ck804_2+1;
}
- dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0));
- if (dev) {
- bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804_4++;
- }
- else {
- printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c);
-
- bus_ck804_4 = bus_ck804_3+1;
- }
-
-#endif
-
dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0));
if (dev) {
bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS);
@@ -160,7 +124,6 @@ void get_bus_conf(void)
}
bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff;
-
/* 8131-1 */
dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
if (dev) {
@@ -192,13 +155,13 @@ void get_bus_conf(void)
bus_coproc_0 = (sysconf.pci1234[2] >> 16) & 0xff;
coprocdn = (sysconf.hcdn[2] & 0xff);
}
-
+
/*I/O APICs: APIC ID Version State Address*/
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(3);
-#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
apicid_ck804 = apicid_base+0;
apicid_8131_1 = apicid_base+1;
diff --git a/src/mainboard/tyan/s2891/irq_tables.c b/src/mainboard/tyan/s2891/irq_tables.c
index f694c85924..c0e484a4f0 100644
--- a/src/mainboard/tyan/s2891/irq_tables.c
+++ b/src/mainboard/tyan/s2891/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify!
+/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
@@ -12,22 +12,22 @@
#include <cpu/amd/amdk8_sysconf.h>
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
}
extern unsigned char bus_isa;
@@ -37,13 +37,13 @@ extern unsigned char bus_ck804_2; //3
extern unsigned char bus_ck804_3; //4
extern unsigned char bus_ck804_4; //5
extern unsigned char bus_ck804_5; //6
-extern unsigned char bus_8131_0;//7
-extern unsigned char bus_8131_1;//8
-extern unsigned char bus_8131_2;//9
+extern unsigned char bus_8131_0; //7
+extern unsigned char bus_8131_1; //8
+extern unsigned char bus_8131_2; //9
extern unsigned char bus_coproc_0;
extern unsigned sbdn3;
-extern unsigned coprocdn;
+extern unsigned coprocdn;
extern void get_bus_conf(void);
@@ -54,32 +54,32 @@ unsigned long write_pirq_routing_table(unsigned long addr)
struct irq_info *pirq_info;
unsigned slot_num;
uint8_t *v;
-
- uint8_t sum=0;
- int i;
unsigned sbdn;
- get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+ uint8_t sum=0;
+ int i;
+
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
sbdn = sysconf.sbdn;
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
- /* This table must be betweeen 0xf0000 & 0x100000 */
- printk_info("Writing IRQ routing tables to 0x%x...", addr);
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
pirq = (void *)(addr);
v = (uint8_t *)(addr);
-
+
pirq->signature = PIRQ_SIGNATURE;
pirq->version = PIRQ_VERSION;
-
+
pirq->rtr_bus = bus_ck804_0;
pirq->rtr_devfn = ((sbdn+9)<<3)|0;
pirq->exclusive_irqs = 0;
-
+
pirq->rtr_vendor = 0x10de;
pirq->rtr_device = 0x005c;
@@ -93,74 +93,74 @@ unsigned long write_pirq_routing_table(unsigned long addr)
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
//pcix bridge
- write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
//co processor
- if(sysconf.pci1234[2] & 1) {
- write_pirq_info(pirq_info, bus_coproc_0, (coprocdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
+ if(sysconf.pci1234[2] & 1) {
+ write_pirq_info(pirq_info, bus_coproc_0, (coprocdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
}
-
+
#if 0
//smbus
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//usb
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//audio
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//sata
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//sata
- write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
//nic
- write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
//Slot1 PCIE x16
- write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0);
+ pirq_info++; slot_num++;
//firewire
- write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
//Slot2 pci
- write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0);
- pirq_info++; slot_num++;
-//Slot3 PCIE x16
- write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0);
+ pirq_info++; slot_num++;
+//Slot3 PCIE x16
+ write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0);
+ pirq_info++; slot_num++;
//Slot4 PCIX
- write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0);
+ pirq_info++; slot_num++;
//Slot5 PCIX
- write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0);
+ pirq_info++; slot_num++;
//Slot6 PCIX
- write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0);
+ pirq_info++; slot_num++;
#endif
-
- pirq->size = 32 + 16 * slot_num;
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
sum = pirq->checksum - sum;
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
printk_info("done.\n");
diff --git a/src/mainboard/tyan/s2891/mptable.c b/src/mainboard/tyan/s2891/mptable.c
index 3b90ff7e78..cf917eeb8e 100644
--- a/src/mainboard/tyan/s2891/mptable.c
+++ b/src/mainboard/tyan/s2891/mptable.c
@@ -13,9 +13,9 @@ extern unsigned char bus_ck804_2; //3
extern unsigned char bus_ck804_3; //4
extern unsigned char bus_ck804_4; //5
extern unsigned char bus_ck804_5; //6
-extern unsigned char bus_8131_0;//7
-extern unsigned char bus_8131_1;//8
-extern unsigned char bus_8131_2;//9
+extern unsigned char bus_8131_0; //7
+extern unsigned char bus_8131_1; //8
+extern unsigned char bus_8131_2; //9
extern unsigned apicid_ck804;
extern unsigned apicid_8131_1;
extern unsigned apicid_8131_2;
@@ -26,52 +26,52 @@ extern void get_bus_conf(void);
void *smp_write_config_table(void *v)
{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "TYAN ";
- static const char productid[12] = "S2891 ";
- struct mp_config_table *mc;
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "TYAN ";
+ static const char productid[12] = "S2891 ";
+ struct mp_config_table *mc;
unsigned sbdn;
- unsigned char bus_num;
+ unsigned char bus_num;
int i;
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
get_bus_conf();
sbdn = sysconf.sbdn;
/*Bus: Bus ID Type*/
/* define bus and isa numbers */
- for(bus_num = 0; bus_num < bus_isa; bus_num++) {
- smp_write_bus(mc, bus_num, "PCI ");
- }
- smp_write_bus(mc, bus_isa, "ISA ");
+ for(bus_num = 0; bus_num < bus_isa; bus_num++) {
+ smp_write_bus(mc, bus_num, "PCI ");
+ }
+ smp_write_bus(mc, bus_isa, "ISA ");
/*I/O APICs: APIC ID Version State Address*/
- {
- device_t dev;
+ {
+ device_t dev;
struct resource *res;
uint32_t dword;
- dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0));
- if (dev) {
+ dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_1);
if (res) {
smp_write_ioapic(mc, apicid_ck804, 0x11, res->base);
@@ -80,33 +80,33 @@ void *smp_write_config_table(void *v)
/* Initialize interrupt mapping*/
dword = 0x0120d218;
- pci_write_config32(dev, 0x7c, dword);
+ pci_write_config32(dev, 0x7c, dword);
- dword = 0x12008a00;
- pci_write_config32(dev, 0x80, dword);
+ dword = 0x12008a00;
+ pci_write_config32(dev, 0x80, dword);
- dword = 0x0000007d;
- pci_write_config32(dev, 0x84, dword);
+ dword = 0x0000007d;
+ pci_write_config32(dev, 0x84, dword);
- }
+ }
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1));
- if (dev) {
+ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res) {
smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base);
}
- }
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1));
- if (dev) {
+ }
+ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res) {
smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base);
}
- }
+ }
}
-
+
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
*/ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_ck804, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_ck804, 0x1);
@@ -122,53 +122,53 @@ void *smp_write_config_table(void *v)
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf);
// Onboard ck804 smbus
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa);
// 10
// Onboard ck804 USB 1.1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21
// Onboard ck804 USB 2
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20
// Onboard ck804 SATA 0
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23
// Onboard ck804 SATA 1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22
//Slot PCIE x16
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4);
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4);
+ }
//Slot PCIE x4
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4);
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4);
+ }
//Onboard ati
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (7<<2)|0, apicid_ck804, 0x13); // 19
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (7<<2)|0, apicid_ck804, 0x13); // 19
//Channel B of 8131
//Onboard Broadcom NIC
- for(i=0;i<2;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28
- }
+ for(i=0;i<2;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28
+ }
//Channel A of 8131
-//Slot 4 PCIX 133/100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (0+i)%4); //24
- }
+//Slot 4 PCIX 133/100/66
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (0+i)%4); //24
+ }
//Slot 3 PCIX 133/100/66 SoDIMM PCI
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|i, apicid_8131_1, (2+i)%4); //26
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|i, apicid_8131_1, (2+i)%4); //26
+ }
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
diff --git a/src/mainboard/tyan/s2891/resourcemap.c b/src/mainboard/tyan/s2891/resourcemap.c
index ad559b2ded..312ce03ad7 100644
--- a/src/mainboard/tyan/s2891/resourcemap.c
+++ b/src/mainboard/tyan/s2891/resourcemap.c
@@ -6,7 +6,6 @@
static void setup_s2891_resource_map(void)
{
static const unsigned int register_values[] = {
-#if 1
/* Careful set limit registers before base registers which contain the enables */
/* DRAM Limit i Registers
* F1:0x44 i = 0
@@ -80,8 +79,6 @@ static void setup_s2891_resource_map(void)
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-#endif
-#if 1
/* Memory-Mapped I/O Limit i Registers
* F1:0x84 i = 0
@@ -158,8 +155,6 @@ static void setup_s2891_resource_map(void)
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-#endif
-#if 1
/* PCI I/O Limit i Registers
* F1:0xC4 i = 0
@@ -220,7 +215,7 @@ static void setup_s2891_resource_map(void)
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-#endif
+
/* Config Base and Limit i Registers
* F1:0xE0 i = 0
* F1:0xE4 i = 1
@@ -257,12 +252,10 @@ static void setup_s2891_resource_map(void)
* [31:24] Bus Number Limit i
* This field defines the highest bus number in configuration region i
*/
-#if 1
// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */
// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-#endif
};
diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb
index 90a6e023bf..f9cbfd40c6 100644
--- a/src/mainboard/tyan/s2892/Config.lb
+++ b/src/mainboard/tyan/s2892/Config.lb
@@ -14,9 +14,9 @@ end
## Compute the start location and size size of
## The coreboot bootloader.
##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-default CONFIG_ROM_PAYLOAD = 1
+default CONFIG_ROM_PAYLOAD = 1
##
## Compute where this copy of coreboot will start in the boot rom
@@ -33,7 +33,7 @@ default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
default XIP_ROM_SIZE=65536
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-arch i386 end
+arch i386 end
##
@@ -43,10 +43,10 @@ arch i386 end
driver mainboard.o
#dir /drivers/ati/ragexl
+
#needed by irq_tables and mptable and acpi_tables
object get_bus_conf.o
-
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
@@ -54,46 +54,42 @@ if HAVE_PIRQ_TABLE object irq_tables.o end
if USE_DCACHE_RAM
if CONFIG_USE_INIT
-
-makerule ./auto.o
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
-end
-
+ makerule ./auto.o
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
+ end
else
-
-makerule ./auto.inc
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
- action "perl -e 's/.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ makerule ./auto.inc
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
end
-end
else
+ ##
+ ## Romcc output
+ ##
+ makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c ../romcc"
+ action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+ end
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
+ makerule ./failover.inc
+ depends "$(MAINBOARD)/failover.c ../romcc"
+ action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+ end
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
+ makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
+ action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+ end
+ makerule ./auto.inc
+ depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
+ action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+ end
end
@@ -101,8 +97,8 @@ end
## Build our 16 bit and 32 bit coreboot entry code
##
if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
end
mainboardinit cpu/x86/32bit/entry32.inc
@@ -113,25 +109,25 @@ if USE_DCACHE_RAM
end
if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
+ ldscript /cpu/amd/car/cache_as_ram.lds
end
end
##
## Build our reset vector (This is where coreboot is entered)
##
-if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
if USE_DCACHE_RAM
else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
+ ### Should this be in the northbridge code?
+ mainboardinit arch/i386/lib/cpu_reset.inc
end
##
@@ -149,24 +145,24 @@ if USE_FALLBACK_IMAGE
end
if USE_DCACHE_RAM
-##
-## Setup Cache-As-Ram
-##
-mainboardinit cpu/amd/car/cache_as_ram.inc
+ ##
+ ## Setup Cache-As-Ram
+ ##
+ mainboardinit cpu/amd/car/cache_as_ram.inc
end
###
-### This is the early phase of coreboot startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
- ldscript /arch/i386/lib/failover.lds
-else
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
+ if USE_DCACHE_RAM
+ ldscript /arch/i386/lib/failover.lds
+ else
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
+ end
end
###
@@ -178,187 +174,185 @@ end
##
if USE_DCACHE_RAM
-if CONFIG_USE_INIT
-initobject auto.o
-else
-mainboardinit ./auto.inc
-end
+ if CONFIG_USE_INIT
+ initobject auto.o
+ else
+ mainboardinit ./auto.inc
+ end
else
-# ROMCC
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
+ # ROMCC
+ mainboardinit cpu/x86/fpu/enable_fpu.inc
+ mainboardinit cpu/x86/mmx/enable_mmx.inc
+ mainboardinit cpu/x86/sse/enable_sse.inc
+ mainboardinit ./auto.inc
+ mainboardinit cpu/x86/sse/disable_sse.inc
+ mainboardinit cpu/x86/mmx/disable_mmx.inc
end
##
-## Include the secondary Configuration files
+## Include the secondary Configuration files
##
if CONFIG_CHIP_NAME
- config chip.h
+ config chip.h
end
-
# sample config for tyan/s2892
chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
-
+ device apic_cluster 0 on
+ chip cpu/amd/socket_940
+ device apic 0 on end
+ end
+ end
device pci_domain 0 on
chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/ck804
+ device pci 18.0 on # northbridge
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/nvidia/ck804
device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
+ device pci 1.0 on # LPC
+ chip superio/winbond/w83627hf
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.6 off # CIR
+ io 0x60 = 0x100
+ end
+ device pnp 2e.7 off # GAME_MIDI_GIPO1
+ io 0x60 = 0x220
+ io 0x62 = 0x300
+ irq 0x70 = 9
+ end
+ device pnp 2e.8 off end # GPIO2
+ device pnp 2e.9 off end # GPIO3
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HW Monitor
+ io 0x60 = 0x290
+ irq 0x70 = 5
+ end
+ end
end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # SM
- device pci 1.1 on # SM 1
+ device pci 1.1 on # SM 0
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 57 on end
+ end
+ end # SM
+ device pci 1.1 on # SM 1
chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4
- device i2c 2d on end
- end
- chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5
- device i2c 2e on end
- end
- chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN
- device i2c 2a on end
- end
- chip drivers/generic/generic # Winbond HWM 0x92
- device i2c 49 on end
- end
- chip drivers/generic/generic # Winbond HWM 0x94
- device i2c 4a on end
- end
+ device i2c 2d on end
+ end
+ chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5
+ device i2c 2e on end
+ end
+ chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN
+ device i2c 2a on end
+ end
+ chip drivers/generic/generic # Winbond HWM 0x92
+ device i2c 49 on end
+ end
+ chip drivers/generic/generic # Winbond HWM 0x94
+ device i2c 4a on end
+ end
end #SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 off end # ACI
- device pci 4.1 off end # MCI
- device pci 6.0 on end # IDE
- device pci 7.0 on end # SATA 1
- device pci 8.0 on end # SATA 0
- device pci 9.0 on # PCI
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 off end # ACI
+ device pci 4.1 off end # MCI
+ device pci 6.0 on end # IDE
+ device pci 7.0 on end # SATA 1
+ device pci 8.0 on end # SATA 0
+ device pci 9.0 on # PCI
# chip drivers/ati/ragexl
chip drivers/pci/onboard
device pci 6.0 on end
register "rom_address" = "0xfff80000"
end
- chip drivers/pci/onboard
- device pci 8.0 on end
- end
+ chip drivers/pci/onboard
+ device pci 8.0 on end
+ end
end
- device pci a.0 off end # NIC
- device pci b.0 off end # PCI E 3
- device pci c.0 off end # PCI E 2
- device pci d.0 on end # PCI E 1
- device pci e.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
+ device pci a.0 off end # NIC
+ device pci b.0 off end # PCI E 3
+ device pci c.0 off end # PCI E 2
+ device pci d.0 on end # PCI E 1
+ device pci e.0 on end # PCI E 0
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
end
- end # device pci 18.0
+ end # device pci 18.0
device pci 18.0 on end # Link 1
device pci 18.0 on
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on
- chip drivers/pci/onboard
- device pci 9.0 on end # broadcom 5704
+ # devices on link 2, link 2 == LDT 2
+ chip southbridge/amd/amd8131
+ # the on/off keyword is mandatory
+ device pci 0.0 on end
+ device pci 0.1 on end
+ device pci 1.0 on
+ chip drivers/pci/onboard
+ device pci 9.0 on end # broadcom 5704
device pci 9.1 on end
- end
+ end
end
- device pci 1.1 on end
- end
+ device pci 1.1 on end
+ end
end # device pci 18.0
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end #mc0
-
+
end # pci_domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end
-# device pnp 0.1 off end
-# device pnp 0.2 off end
-# device pnp 0.3 off end
-# device pnp 0.4 off end
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end
+# device pnp 0.1 off end
+# device pnp 0.2 off end
+# device pnp 0.3 off end
+# device pnp 0.4 off end
# device pnp 0.5 on end
-# end
+# end
end # root_complex
diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb
index 9dbaf9dd31..381444418c 100644
--- a/src/mainboard/tyan/s2892/Options.lb
+++ b/src/mainboard/tyan/s2892/Options.lb
@@ -30,9 +30,9 @@ uses USE_OPTION_TABLE
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
+uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
-uses MAINBOARD
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
@@ -76,7 +76,6 @@ default ROM_SIZE=524288
#1M bytes
#default ROM_SIZE=1048576
-
##
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
@@ -131,6 +130,9 @@ default CONFIG_MAX_CPUS=4
default CONFIG_MAX_PHYSICAL_CPUS=2
default CONFIG_LOGICAL_CPUS=1
+#1G memory hole
+default HW_MEM_HOLE_SIZEK=0x100000
+
##HT Unit ID offset, default is 1, the typical one
default HT_CHAIN_UNITID_BASE=0x0
@@ -143,9 +145,6 @@ default SB_HT_CHAIN_ON_BUS0=2
##only offset for SB chain?, default is yes(1)
default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-#1G memory hole
-default HW_MEM_HOLE_SIZEK=0x100000
-
#BTEXT Console
#default CONFIG_CONSOLE_BTEXT=1
diff --git a/src/mainboard/tyan/s2892/auto.c b/src/mainboard/tyan/s2892/auto.c
index 917fb8414a..3bd9209f09 100644
--- a/src/mainboard/tyan/s2892/auto.c
+++ b/src/mainboard/tyan/s2892/auto.c
@@ -1,5 +1,5 @@
#define ASSEMBLY 1
-
+
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
@@ -33,20 +33,20 @@
static void hard_reset(void)
{
- set_bios_reset();
+ set_bios_reset();
- /* full reset */
+ /* full reset */
outb(0x0a, 0x0cf9);
- outb(0x0e, 0x0cf9);
+ outb(0x0e, 0x0cf9);
}
static void soft_reset(void)
{
- set_bios_reset();
+ set_bios_reset();
#if 1
- /* link reset */
+ /* link reset */
outb(0x02, 0x0cf9);
- outb(0x06, 0x0cf9);
+ outb(0x06, 0x0cf9);
#endif
}
@@ -73,10 +73,10 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
- /* tyan does not want the default */
-#include "resourcemap.c"
+/* tyan does not want the default */
+#include "resourcemap.c"
-#define FIRST_CPU 1
+#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -84,14 +84,13 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
//set GPIO to input mode
#define CK804_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
#include "southbridge/nvidia/ck804/ck804_early_setup.c"
-
static void main(unsigned long bist)
{
static const struct mem_controller cpu[] = {
@@ -119,32 +118,31 @@ static void main(unsigned long bist)
#endif
};
- int needs_reset;
+ int needs_reset;
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
+ if (bist == 0) {
+ k8_init_and_stop_secondaries();
+ }
-
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
+ uart_init();
+ console_init();
+
/* Halt if there was a built in self test failure */
// report_bist_failure(bist);
- setup_s2892_resource_map();
+ setup_s2892_resource_map();
needs_reset = setup_coherent_ht_domain();
-
+
needs_reset |= ht_setup_chains_x();
needs_reset |= ck804_early_setup_x();
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ soft_reset();
+ }
enable_smbus();
diff --git a/src/mainboard/tyan/s2892/cache_as_ram_auto.c b/src/mainboard/tyan/s2892/cache_as_ram_auto.c
index 4b63ffed4e..f1a4bdb8a4 100644
--- a/src/mainboard/tyan/s2892/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2892/cache_as_ram_auto.c
@@ -1,6 +1,6 @@
#define ASSEMBLY 1
#define __ROMCC__
-
+
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
@@ -13,18 +13,8 @@
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
-#if 0
-static void post_code(uint8_t value) {
-#if 1
- int i;
- for(i=0;i<0x80000;i++) {
- outb(value, 0x80);
- }
-#endif
-}
-#endif
-
#include <cpu/amd/model_fxx_rev.h>
+
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
@@ -72,7 +62,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "sdram/generic_sdram.c"
/* tyan does not want the default */
-#include "resourcemap.c"
+#include "resourcemap.c"
#if CONFIG_LOGICAL_CPUS==1
#define SET_NB_CFG_54 1
@@ -83,10 +73,10 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
//set GPIO to input mode
#define CK804_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
#include "southbridge/nvidia/ck804/ck804_early_setup.c"
@@ -96,7 +86,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
#if USE_FALLBACK_IMAGE == 1
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
@@ -105,63 +94,64 @@ static inline int spd_read_byte(unsigned device, unsigned address)
static void sio_setup(void)
{
- unsigned value;
- uint32_t dword;
- uint8_t byte;
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
- byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
+ byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<0);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
+ dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
+ dword |= (1<<0);
+ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
}
+
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
+ unsigned last_boot_normal_x = last_boot_normal();
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the ck804 */
+ ck804_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+// post_code(0x22);
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
- );
-
+// post_code(0x23);
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
+ );
+
fallback_image:
-// post_code(0x25);
+// post_code(0x25);
;
}
#endif
@@ -172,91 +162,90 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
+ failover_process(bist, cpu_init_detectedx);
#endif
- real_main(bist, cpu_init_detectedx);
+ real_main(bist, cpu_init_detectedx);
}
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
- static const uint16_t spd_addr [] = {
- (0xa<<3)|0, (0xa<<3)|2, 0, 0,
- (0xa<<3)|1, (0xa<<3)|3, 0, 0,
+ static const uint16_t spd_addr [] = {
+ (0xa<<3)|0, (0xa<<3)|2, 0, 0,
+ (0xa<<3)|1, (0xa<<3)|3, 0, 0,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
- (0xa<<3)|4, (0xa<<3)|6, 0, 0,
- (0xa<<3)|5, (0xa<<3)|7, 0, 0,
+ (0xa<<3)|4, (0xa<<3)|6, 0, 0,
+ (0xa<<3)|5, (0xa<<3)|7, 0, 0,
#endif
- };
+ };
- int needs_reset;
- unsigned bsp_apicid = 0;
+ int needs_reset;
+ unsigned bsp_apicid = 0;
- struct mem_controller ctrl[8];
- unsigned nodes;
+ struct mem_controller ctrl[8];
+ unsigned nodes;
- if (bist == 0) {
+ if (bist == 0) {
init_cpus(cpu_init_detectedx);
- }
+ }
// post_code(0x32);
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
+ w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
- setup_s2892_resource_map();
+ setup_s2892_resource_map();
#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 0));
- dump_pci_device(PCI_DEV(0, 0x19, 0));
+ dump_pci_device(PCI_DEV(0, 0x18, 0));
+ dump_pci_device(PCI_DEV(0, 0x19, 0));
#endif
- needs_reset = setup_coherent_ht_domain();
+ needs_reset = setup_coherent_ht_domain();
- wait_all_core0_started();
+ wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
- wait_all_other_cores_started(bsp_apicid);
+ // It is said that we should start core1 after all core0 launched
+ start_other_cores();
+ wait_all_other_cores_started(bsp_apicid);
#endif
- needs_reset |= ht_setup_chains_x();
+ needs_reset |= ht_setup_chains_x();
- needs_reset |= ck804_early_setup_x();
+ needs_reset |= ck804_early_setup_x();
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ soft_reset();
+ }
- allow_all_aps_stop(bsp_apicid);
+ allow_all_aps_stop(bsp_apicid);
- nodes = get_nodes();
- //It's the time to set ctrl now;
- fill_mem_ctrl(nodes, ctrl, spd_addr);
+ nodes = get_nodes();
+ //It's the time to set ctrl now;
+ fill_mem_ctrl(nodes, ctrl, spd_addr);
- enable_smbus();
+ enable_smbus();
#if 0
- dump_spd_registers(&cpu[0]);
+ dump_spd_registers(&cpu[0]);
#endif
#if 0
- dump_smbus_registers();
+ dump_smbus_registers();
#endif
- memreset_setup();
- sdram_initialize(nodes, ctrl);
+ memreset_setup();
+ sdram_initialize(nodes, ctrl);
#if 0
- print_pci_devices();
+ print_pci_devices();
#endif
#if 0
- dump_pci_devices();
+ dump_pci_devices();
#endif
- post_cache_as_ram();
+ post_cache_as_ram();
}
diff --git a/src/mainboard/tyan/s2892/get_bus_conf.c b/src/mainboard/tyan/s2892/get_bus_conf.c
index 2e8a5cd337..4f215ce9ae 100644
--- a/src/mainboard/tyan/s2892/get_bus_conf.c
+++ b/src/mainboard/tyan/s2892/get_bus_conf.c
@@ -25,7 +25,7 @@
unsigned apicid_8131_1;
unsigned apicid_8131_2;
-unsigned pci1234x[] =
+unsigned pci1234x[] =
{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
0x0000ff0,
@@ -37,7 +37,7 @@ unsigned pci1234x[] =
// 0x0000ff0,
// 0x0000ff0
};
-unsigned hcdnx[] =
+unsigned hcdnx[] =
{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
0x20202020,
0x20202020,
@@ -75,7 +75,7 @@ void get_bus_conf(void)
}
get_sblk_pci1234();
-
+
sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
sbdn = sysconf.sbdn;
@@ -88,51 +88,15 @@ void get_bus_conf(void)
dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0));
if (dev) {
bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if 0
- bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804_2++;
-#else
bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
bus_ck804_4++;
-#endif
}
else {
printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09);
bus_ck804_1 = 2;
-#if 0
- bus_ck804_2 = 3;
-#else
bus_ck804_4 = 3;
-#endif
-
}
-#if 0
- dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0));
- if (dev) {
- bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804_3++;
- }
- else {
- printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b);
-
- bus_ck804_3 = bus_ck804_2+1;
- }
-
- dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0));
- if (dev) {
- bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804_4++;
- }
- else {
- printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c);
-
- bus_ck804_4 = bus_ck804_3+1;
- }
-
-#endif
dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0));
if (dev) {
@@ -157,7 +121,6 @@ void get_bus_conf(void)
}
bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff;
-
/* 8131-1 */
dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
if (dev) {
@@ -190,8 +153,8 @@ void get_bus_conf(void)
/*I/O APICs: APIC ID Version State Address*/
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(3);
-#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
apicid_ck804 = apicid_base+0;
apicid_8131_1 = apicid_base+1;
diff --git a/src/mainboard/tyan/s2892/irq_tables.c b/src/mainboard/tyan/s2892/irq_tables.c
index a1b2b2ed37..bb5e8e0307 100644
--- a/src/mainboard/tyan/s2892/irq_tables.c
+++ b/src/mainboard/tyan/s2892/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify!
+/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
@@ -12,22 +12,22 @@
#include <cpu/amd/amdk8_sysconf.h>
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
}
extern unsigned char bus_isa;
@@ -37,9 +37,9 @@ extern unsigned char bus_ck804_2; //3
extern unsigned char bus_ck804_3; //4
extern unsigned char bus_ck804_4; //5
extern unsigned char bus_ck804_5; //6
-extern unsigned char bus_8131_0;//7
-extern unsigned char bus_8131_1;//8
-extern unsigned char bus_8131_2;//9
+extern unsigned char bus_8131_0; //7
+extern unsigned char bus_8131_1; //8
+extern unsigned char bus_8131_2; //9
extern unsigned sbdn3;
@@ -54,30 +54,30 @@ unsigned long write_pirq_routing_table(unsigned long addr)
uint8_t *v;
unsigned sbdn;
- uint8_t sum=0;
- int i;
+ uint8_t sum=0;
+ int i;
- get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
sbdn = sysconf.sbdn;
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
- /* This table must be betweeen 0xf0000 & 0x100000 */
- printk_info("Writing IRQ routing tables to 0x%x...", addr);
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
pirq = (void *)(addr);
v = (uint8_t *)(addr);
-
+
pirq->signature = PIRQ_SIGNATURE;
pirq->version = PIRQ_VERSION;
-
+
pirq->rtr_bus = bus_ck804_0;
pirq->rtr_devfn = ((sbdn+9)<<3)|0;
pirq->exclusive_irqs = 0;
-
+
pirq->rtr_vendor = 0x10de;
pirq->rtr_device = 0x005c;
@@ -91,69 +91,69 @@ unsigned long write_pirq_routing_table(unsigned long addr)
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
//pcix bridge
- write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
-
+ write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+
#if 0
//smbus
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//usb
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//audio
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//sata
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//sata
- write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
//nic
- write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
//Slot1 PCIE x16
- write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0);
+ pirq_info++; slot_num++;
//firewire
- write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
//Slot2 pci
- write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0);
- pirq_info++; slot_num++;
-//Slot3 PCIE x16
- write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0);
+ pirq_info++; slot_num++;
+//Slot3 PCIE x16
+ write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0);
+ pirq_info++; slot_num++;
//Slot4 PCIX
- write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0);
+ pirq_info++; slot_num++;
//Slot5 PCIX
- write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0);
+ pirq_info++; slot_num++;
//Slot6 PCIX
- write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0);
+ pirq_info++; slot_num++;
#endif
-
- pirq->size = 32 + 16 * slot_num;
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
sum = pirq->checksum - sum;
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
printk_info("done.\n");
diff --git a/src/mainboard/tyan/s2892/mptable.c b/src/mainboard/tyan/s2892/mptable.c
index 8ce5434d5d..c46fa9add8 100644
--- a/src/mainboard/tyan/s2892/mptable.c
+++ b/src/mainboard/tyan/s2892/mptable.c
@@ -13,64 +13,65 @@ extern unsigned char bus_ck804_2; //3
extern unsigned char bus_ck804_3; //4
extern unsigned char bus_ck804_4; //5
extern unsigned char bus_ck804_5; //6
-extern unsigned char bus_8131_0;//7
-extern unsigned char bus_8131_1;//8
-extern unsigned char bus_8131_2;//9
+extern unsigned char bus_8131_0; //7
+extern unsigned char bus_8131_1; //8
+extern unsigned char bus_8131_2; //9
extern unsigned apicid_ck804;
extern unsigned apicid_8131_1;
extern unsigned apicid_8131_2;
extern unsigned sbdn3;
+extern void get_bus_conf(void);
void *smp_write_config_table(void *v)
{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "TYAN ";
- static const char productid[12] = "S2892 ";
- struct mp_config_table *mc;
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "TYAN ";
+ static const char productid[12] = "S2892 ";
+ struct mp_config_table *mc;
unsigned sbdn;
- unsigned char bus_num;
+ unsigned char bus_num;
int i;
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
get_bus_conf();
sbdn = sysconf.sbdn;
/*Bus: Bus ID Type*/
/* define bus and isa numbers */
- for(bus_num = 0; bus_num < bus_isa; bus_num++) {
- smp_write_bus(mc, bus_num, "PCI ");
- }
- smp_write_bus(mc, bus_isa, "ISA ");
+ for(bus_num = 0; bus_num < bus_isa; bus_num++) {
+ smp_write_bus(mc, bus_num, "PCI ");
+ }
+ smp_write_bus(mc, bus_isa, "ISA ");
/*I/O APICs: APIC ID Version State Address*/
- {
- device_t dev;
+ {
+ device_t dev;
struct resource *res;
uint32_t dword;
- dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0));
- if (dev) {
+ dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_1);
if (res) {
smp_write_ioapic(mc, apicid_ck804, 0x11, res->base);
@@ -79,33 +80,33 @@ void *smp_write_config_table(void *v)
/* Initialize interrupt mapping*/
dword = 0x0120d218;
- pci_write_config32(dev, 0x7c, dword);
+ pci_write_config32(dev, 0x7c, dword);
- dword = 0x12008a00;
- pci_write_config32(dev, 0x80, dword);
+ dword = 0x12008a00;
+ pci_write_config32(dev, 0x80, dword);
- dword = 0x0000007d;
- pci_write_config32(dev, 0x84, dword);
+ dword = 0x0000007d;
+ pci_write_config32(dev, 0x84, dword);
- }
+ }
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1));
- if (dev) {
+ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res) {
smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base);
}
- }
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1));
- if (dev) {
+ }
+ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res) {
smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base);
}
- }
+ }
}
-
+
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
*/ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_ck804, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_ck804, 0x1);
@@ -121,74 +122,74 @@ void *smp_write_config_table(void *v)
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf);
// Onboard ck804 smbus
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa);
// 10
// Onboard ck804 USB 1.1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21
// Onboard ck804 USB 2
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20
// Onboard ck804 SATA 0
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23
// Onboard ck804 SATA 1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22
//Slot PCIE x16
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4);
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4);
+ }
//Slot PCIE x4
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4);
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4);
+ }
//Slot 2 PCI 32
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (4<<2)|i, apicid_ck804, 0x10+(0+i)%4); //16
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (4<<2)|i, apicid_ck804, 0x10+(0+i)%4); //16
+ }
//Onboard ati
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (6<<2)|0, apicid_ck804, 0x12); // 18
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (6<<2)|0, apicid_ck804, 0x12); // 18
//Onboard intel 10/100
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (8<<2)|0, apicid_ck804, 0x12); // 18
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (8<<2)|0, apicid_ck804, 0x12); // 18
//Channel B of 8131
//Onboard Broadcom NIC
- for(i=0;i<2;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28
- }
+ for(i=0;i<2;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28
+ }
//SO DIMM PCI-X
- for(i=0;i<2;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (7<<2)|i, apicid_8131_2, (0+i)%4); //28
- }
+ for(i=0;i<2;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (7<<2)|i, apicid_8131_2, (0+i)%4); //28
+ }
//Slot 4 PCIX 133/100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|i, apicid_8131_2, (2+i)%4); //30
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|i, apicid_8131_2, (2+i)%4); //30
+ }
//Channel A of 8131
-//Slot 5 PCIX 133/100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|i, apicid_8131_1, (3+i)%4); //27
- }
+//Slot 5 PCIX 133/100/66
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|i, apicid_8131_1, (3+i)%4); //27
+ }
-//Slot 6 PCIX 133/100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|i, apicid_8131_1, (2+i)%4); //26
- }
+//Slot 6 PCIX 133/100/66
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|i, apicid_8131_1, (2+i)%4); //26
+ }
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
diff --git a/src/mainboard/tyan/s2892/resourcemap.c b/src/mainboard/tyan/s2892/resourcemap.c
index b7d72db90e..04d3f59edd 100644
--- a/src/mainboard/tyan/s2892/resourcemap.c
+++ b/src/mainboard/tyan/s2892/resourcemap.c
@@ -6,7 +6,6 @@
static void setup_s2892_resource_map(void)
{
static const unsigned int register_values[] = {
-#if 1
/* Careful set limit registers before base registers which contain the enables */
/* DRAM Limit i Registers
* F1:0x44 i = 0
@@ -80,8 +79,6 @@ static void setup_s2892_resource_map(void)
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-#endif
-#if 1
/* Memory-Mapped I/O Limit i Registers
* F1:0x84 i = 0
@@ -158,8 +155,6 @@ static void setup_s2892_resource_map(void)
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-#endif
-#if 1
/* PCI I/O Limit i Registers
* F1:0xC4 i = 0
@@ -220,7 +215,7 @@ static void setup_s2892_resource_map(void)
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-#endif
+
/* Config Base and Limit i Registers
* F1:0xE0 i = 0
* F1:0xE4 i = 1
@@ -257,12 +252,10 @@ static void setup_s2892_resource_map(void)
* [31:24] Bus Number Limit i
* This field defines the highest bus number in configuration region i
*/
-#if 1
// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */
// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-#endif
};
diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb
index 980c2570ad..019dd9be78 100644
--- a/src/mainboard/tyan/s2895/Config.lb
+++ b/src/mainboard/tyan/s2895/Config.lb
@@ -19,7 +19,7 @@ end
## Compute the start location and size size of
## The coreboot bootloader.
##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
##
@@ -39,14 +39,14 @@ default XIP_ROM_SIZE=65536
if USE_FAILOVER_IMAGE
default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
else
- if USE_FALLBACK_IMAGE
- default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
- else
- default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
- end
+ if USE_FALLBACK_IMAGE
+ default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
+ else
+ default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+ end
end
-arch i386 end
+arch i386 end
##
## Build the objects we have code for in this directory.
@@ -59,44 +59,45 @@ object get_bus_conf.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
+
if USE_DCACHE_RAM
- if CONFIG_USE_INIT
- makerule ./auto.o
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
- end
- else
- makerule ./auto.inc
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
- action "perl -e 's/.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/.text/.section .rom.text/g' -pi $@"
- end
+if CONFIG_USE_INIT
+ makerule ./auto.o
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
end
+else
+ makerule ./auto.inc
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
+end
else
##
## Romcc output
##
makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+ depends "$(MAINBOARD)/failover.c ../romcc"
+ action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
end
makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+ depends "$(MAINBOARD)/failover.c ../romcc"
+ action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
end
makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+ depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
+ action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+ depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
+ action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
end
@@ -105,48 +106,47 @@ end
## Build our 16 bit and 32 bit coreboot entry code
##
if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
+ if USE_FAILOVER_IMAGE
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
+ end
else
- if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/entry16.inc
- ldscript /cpu/x86/16bit/entry16.lds
- end
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
+ end
end
mainboardinit cpu/x86/32bit/entry32.inc
if USE_DCACHE_RAM
- if CONFIG_USE_INIT
- ldscript /cpu/x86/32bit/entry32.lds
- end
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
- if CONFIG_USE_INIT
- ldscript /cpu/amd/car/cache_as_ram.lds
- end
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
end
-
##
## Build our reset vector (This is where coreboot is entered)
##
if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+ if USE_FAILOVER_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
else
- if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
end
@@ -166,15 +166,15 @@ ldscript /southbridge/nvidia/ck804/id.lds
## ROMSTRAP table for CK804
##
if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
- end
+ if USE_FAILOVER_IMAGE
+ mainboardinit southbridge/nvidia/ck804/romstrap.inc
+ ldscript /southbridge/nvidia/ck804/romstrap.lds
+ end
else
- if USE_FALLBACK_IMAGE
- mainboardinit southbridge/nvidia/ck804/romstrap.inc
- ldscript /southbridge/nvidia/ck804/romstrap.lds
- end
+ if USE_FALLBACK_IMAGE
+ mainboardinit southbridge/nvidia/ck804/romstrap.inc
+ ldscript /southbridge/nvidia/ck804/romstrap.lds
+ end
end
if USE_DCACHE_RAM
@@ -185,24 +185,24 @@ if USE_DCACHE_RAM
end
###
-### This is the early phase of coreboot startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
- if USE_DCACHE_RAM
- ldscript /arch/i386/lib/failover_failover.lds
+ if USE_FAILOVER_IMAGE
+ if USE_DCACHE_RAM
+ ldscript /arch/i386/lib/failover_failover.lds
+ end
end
- end
else
- if USE_FALLBACK_IMAGE
- if USE_DCACHE_RAM
- ldscript /arch/i386/lib/failover.lds
- else
- mainboardinit ./failover.inc
+ if USE_FALLBACK_IMAGE
+ if USE_DCACHE_RAM
+ ldscript /arch/i386/lib/failover.lds
+ else
+ mainboardinit ./failover.inc
+ end
end
- end
end
##
@@ -228,7 +228,7 @@ else
end
##
-## Include the secondary Configuration files
+## Include the secondary Configuration files
##
if CONFIG_CHIP_NAME
config chip.h
@@ -236,177 +236,158 @@ end
# sample config for tyan/s2895
chip northbridge/amd/amdk8/root_complex
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- end
+ device apic_cluster 0 on
+ chip cpu/amd/socket_940
+ device apic 0 on end
+ end
+ end
device pci_domain 0 on
chip northbridge/amd/amdk8 #mc0
- device pci 18.0 on
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/ck804
+ device pci 18.0 on # northbridge
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/nvidia/ck804
device pci 0.0 on end # HT
- device pci 1.0 on # LPC
- chip superio/smsc/lpc47b397
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.7 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.8 on # HW Monitor
- io 0x60 = 0x290
- chip drivers/generic/generic # LM95221 CPU temp
- device i2c 2b on end
- end
- chip drivers/generic/generic # EMCT03
- device i2c 54 on end
- end
+ device pci 1.0 on # LPC
+ chip superio/smsc/lpc47b397
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
end
- device pnp 2e.a on # RT
- io 0x60 = 0x400
+ device pnp 2e.4 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
end
- end
+ device pnp 2e.5 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.7 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.8 on # HW Monitor
+ io 0x60 = 0x290
+ chip drivers/generic/generic # LM95221 CPU temp
+ device i2c 2b on end
+ end
+ chip drivers/generic/generic # EMCT03
+ device i2c 54 on end
+ end
+ end
+ device pnp 2e.a on # RT
+ io 0x60 = 0x400
+ end
+ end
end
- device pci 1.1 on # SM 0
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
+ device pci 1.1 on # SM 0
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 57 on end
+ end
end # SM
- device pci 1.1 on # SM 1
-#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
-# chip drivers/generic/generic #PCIXA Slot1
-# device i2c 50 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot1
-# device i2c 51 on end
-# end
-# chip drivers/generic/generic #PCIXB Slot2
-# device i2c 52 on end
-# end
-# chip drivers/generic/generic #PCI Slot1
-# device i2c 53 on end
-# end
-# chip drivers/generic/generic #Master CK804 PCI-E
-# device i2c 54 on end
-# end
-# chip drivers/generic/generic #Slave CK804 PCI-E
-# device i2c 55 on end
-# end
- chip drivers/generic/generic #MAC EEPROM
- device i2c 51 on end
- end
-
- end # SM
- device pci 2.0 on end # USB 1.1
- device pci 2.1 on end # USB 2
- device pci 4.0 on end # ACI
- device pci 4.1 off end # MCI
- device pci 6.0 on end # IDE
- device pci 7.0 on end # SATA 1
- device pci 8.0 on end # SATA 0
- device pci 9.0 on end # PCI
- device pci a.0 on end # NIC
- device pci b.0 off end # PCI E 3
- device pci c.0 off end # PCI E 2
- device pci d.0 off end # PCI E 1
- device pci e.0 on end # PCI E 0
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- register "sata0_enable" = "1"
- register "sata1_enable" = "1"
+ device pci 1.1 on # SM 1
+ chip drivers/generic/generic #MAC EEPROM
+ device i2c 51 on end
+ end
+
+ end # SM
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 on end # ACI
+ device pci 4.1 off end # MCI
+ device pci 6.0 on end # IDE
+ device pci 7.0 on end # SATA 1
+ device pci 8.0 on end # SATA 0
+ device pci 9.0 on end # PCI
+ device pci a.0 on end # NIC
+ device pci b.0 off end # PCI E 3
+ device pci c.0 off end # PCI E 2
+ device pci d.0 off end # PCI E 1
+ device pci e.0 on end # PCI E 0
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
# register "nic_rom_address" = "0xfff80000" # 64k
# register "raid_rom_address" = "0xfff90000"
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
register "mac_eeprom_addr" = "0x51"
end
- end # device pci 18.0
+ end # device pci 18.0
device pci 18.0 on end # Link 1
device pci 18.0 on
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on
- chip drivers/pci/onboard
- device pci 6.0 on end # lsi scsi
- device pci 6.1 on end
- end
+ # devices on link 2, link 2 == LDT 2
+ chip southbridge/amd/amd8131
+ # the on/off keyword is mandatory
+ device pci 0.0 on end
+ device pci 0.1 on end
+ device pci 1.0 on
+ chip drivers/pci/onboard
+ device pci 6.0 on end # lsi scsi
+ device pci 6.1 on end
+ end
end
device pci 1.1 on end
- end
+ end
end # device pci 18.0
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
- end # mc0
-
+ end #mc0
+
chip northbridge/amd/amdk8
- device pci 19.0 on # northbridge
- # devices on link 0, link 0 == LDT 0
- chip southbridge/nvidia/ck804
- device pci 0.0 on end # HT
- device pci 1.0 on end # LPC
- device pci 1.1 off end # SM
- device pci 2.0 off end # USB 1.1
- device pci 2.1 off end # USB 2
- device pci 4.0 off end # ACI
- device pci 4.1 off end # MCI
- device pci 6.0 off end # IDE
- device pci 7.0 off end # SATA 1
- device pci 8.0 off end # SATA 0
- device pci 9.0 off end # PCI
- device pci a.0 on end # NIC
- device pci b.0 off end # PCI E 3
- device pci c.0 off end # PCI E 2
- device pci d.0 off end # PCI E 1
- device pci e.0 on end # PCI E 0
+ device pci 19.0 on # northbridge
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/nvidia/ck804
+ device pci 0.0 on end # HT
+ device pci 1.0 on end # LPC
+ device pci 1.1 off end # SM
+ device pci 2.0 off end # USB 1.1
+ device pci 2.1 off end # USB 2
+ device pci 4.0 off end # ACI
+ device pci 4.1 off end # MCI
+ device pci 6.0 off end # IDE
+ device pci 7.0 off end # SATA 1
+ device pci 8.0 off end # SATA 0
+ device pci 9.0 off end # PCI
+ device pci a.0 on end # NIC
+ device pci b.0 off end # PCI E 3
+ device pci c.0 off end # PCI E 2
+ device pci d.0 off end # PCI E 1
+ device pci e.0 on end # PCI E 0
# register "nic_rom_address" = "0xfff80000" # 64k
- register "mac_eeprom_smbus" = "3"
- register "mac_eeprom_addr" = "0x51"
- end
- end # device pci 19.0
-
+ register "mac_eeprom_smbus" = "3"
+ register "mac_eeprom_addr" = "0x51"
+ end
+ end # device pci 19.0
+
device pci 19.0 on end
device pci 19.0 on end
device pci 19.1 on end
@@ -414,15 +395,15 @@ chip northbridge/amd/amdk8/root_complex
device pci 19.3 on end
end
end # PCI domain
-
-# chip drivers/generic/debug
-# device pnp 0.0 off end # chip name
-# device pnp 0.1 off end # pci_regs_all
-# device pnp 0.2 off end # mem
-# device pnp 0.3 off end # cpuid
-# device pnp 0.4 on end # smbus_regs_all
-# device pnp 0.5 off end # dual core msr
-# device pnp 0.6 off end # cache size
-# device pnp 0.7 off end # tsc
-# end
-end #root_complex
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 off end # pci_regs_all
+# device pnp 0.2 off end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 on end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
+# end
+end # root_complex
diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb
index 84922a399a..b67642cd6a 100644
--- a/src/mainboard/tyan/s2895/Options.lb
+++ b/src/mainboard/tyan/s2895/Options.lb
@@ -37,7 +37,7 @@ uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
uses _RAMBASE
uses CONFIG_GDB_STUB
@@ -166,7 +166,7 @@ default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
#Opteron K8 1G HT Support
default K8_HT_FREQ_1G_SUPPORT=1
-#VGA
+#VGA Console
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
diff --git a/src/mainboard/tyan/s2895/auto.c b/src/mainboard/tyan/s2895/auto.c
index 2aa19115ab..a4b86627e1 100644
--- a/src/mainboard/tyan/s2895/auto.c
+++ b/src/mainboard/tyan/s2895/auto.c
@@ -1,5 +1,5 @@
#define ASSEMBLY 1
-
+
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
@@ -37,20 +37,20 @@
static void hard_reset(void)
{
- set_bios_reset();
+ set_bios_reset();
- /* full reset */
+ /* full reset */
outb(0x0a, 0x0cf9);
- outb(0x0e, 0x0cf9);
+ outb(0x0e, 0x0cf9);
}
static void soft_reset(void)
{
- set_bios_reset();
+ set_bios_reset();
#if 1
- /* link reset */
+ /* link reset */
outb(0x02, 0x0cf9);
- outb(0x06, 0x0cf9);
+ outb(0x06, 0x0cf9);
#endif
}
@@ -63,7 +63,7 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
}
#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-
+
#define SUPERIO_GPIO_IO_BASE 0x400
static void sio_gpio_setup(void){
@@ -71,13 +71,9 @@ static void sio_gpio_setup(void){
unsigned value;
// lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); // Already enable in failover.c
-
-#if 1
lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
-#endif
-
}
static inline void activate_spd_rom(const struct mem_controller *ctrl)
@@ -91,23 +87,14 @@ static inline int spd_read_byte(unsigned device, unsigned address)
}
#define QRANK_DIMM_SUPPORT 1
-
#include "northbridge/amd/amdk8/raminit.c"
-#if 0
- #define ENABLE_APIC_EXT_ID 1
- #define APIC_ID_OFFSET 0x10
- #define LIFT_BSP_APIC_ID 0
-#else
- #define ENABLE_APIC_EXT_ID 0
-#endif
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
/* tyan does not want the default */
#include "resourcemap.c"
-
-#define FIRST_CPU 1
+#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -116,18 +103,16 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#define CK804_USE_NIC 1
#define CK804_USE_ACI 1
#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
-
//set GPIO to input mode
#define CK804_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
-
-#include "southbridge/nvidia/ck804/ck804_early_setup.c"
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
+#include "southbridge/nvidia/ck804/ck804_early_setup.c"
static void main(unsigned long bist)
{
@@ -156,41 +141,37 @@ static void main(unsigned long bist)
#endif
};
- int needs_reset;
+ int needs_reset;
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
+ if (bist == 0) {
+ k8_init_and_stop_secondaries();
+ }
- // post_code(0x32);
+ lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
- lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
sio_gpio_setup();
- setup_s2895_resource_map();
+ setup_s2895_resource_map();
needs_reset = setup_coherent_ht_domain();
- needs_reset |= ht_setup_chains_x();
-
- needs_reset |= ck804_early_setup_x();
+ needs_reset |= ht_setup_chains_x();
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
+ needs_reset |= ck804_early_setup_x();
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ soft_reset();
+ }
enable_smbus();
memreset_setup();
sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
-
}
diff --git a/src/mainboard/tyan/s2895/cache_as_ram_auto.c b/src/mainboard/tyan/s2895/cache_as_ram_auto.c
index 576bebebfa..99afbd3bc2 100644
--- a/src/mainboard/tyan/s2895/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2895/cache_as_ram_auto.c
@@ -1,18 +1,16 @@
#define ASSEMBLY 1
#define __ROMCC__
-
#define K8_ALLOCATE_IO_RANGE 1
//#define K8_SCAN_PCI_BUS 1
-
+//used by raminit
#define QRANK_DIMM_SUPPORT 1
#if CONFIG_LOGICAL_CPUS==1
#define SET_NB_CFG_54 1
#endif
-
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
@@ -27,17 +25,6 @@
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
-#if 0
-static void post_code(uint8_t value) {
-#if 1
- int i;
- for(i=0;i<0x8000;i++) {
- outb(value, 0x80);
- }
-#endif
-}
-#endif
-
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/incoherent_ht.c"
@@ -68,7 +55,6 @@ static void post_code(uint8_t value) {
#include "cpu/amd/mtrr/amd_earlymtrr.c"
-
#include "northbridge/amd/amdk8/setup_resource_map.c"
#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
@@ -81,15 +67,14 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
{
}
-
static void sio_gpio_setup(void){
- unsigned value;
+ unsigned value;
- /*Enable onboard scsi*/
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
- value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
+ /*Enable onboard scsi*/
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
+ value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
}
@@ -103,13 +88,12 @@ static inline int spd_read_byte(unsigned device, unsigned address)
return smbus_read_byte(device, address);
}
-
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
/* tyan does not want the default */
-#include "resourcemap.c"
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
@@ -122,12 +106,12 @@ static inline int spd_read_byte(unsigned device, unsigned address)
//set GPIO to input mode
#define CK804_MB_SETUP \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
- RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
#include "southbridge/nvidia/ck804/ck804_early_setup_car.c"
@@ -144,105 +128,103 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-
static void sio_setup(void)
{
- unsigned value;
- uint32_t dword;
- uint8_t byte;
-
-
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);
-
- byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<29)|(1<<0);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
- dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xa4);
- dword |= (1<<16);
- pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
-
- lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE);
- value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
- value &= 0xbf;
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
+
+ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);
+
+ byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
+
+ dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
+ dword |= (1<<29)|(1<<0);
+ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
+
+ dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xa4);
+ dword |= (1<<16);
+ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword);
+
+ lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE);
+ value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
+ value &= 0xbf;
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
}
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
+ unsigned last_boot_normal_x = last_boot_normal();
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the ck804 */
+ ck804_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+// post_code(0x22);
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
+// post_code(0x23);
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
+ );
fallback_image:
-// post_code(0x25);
+// post_code(0x25);
#if HAVE_FAILOVER_BOOT==1
- __asm__ volatile ("jmp __fallback_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- )
+ __asm__ volatile ("jmp __fallback_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ )
#endif
;
}
#endif
+
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-#if HAVE_FAILOVER_BOOT==1
- #if USE_FAILOVER_IMAGE==1
- failover_process(bist, cpu_init_detectedx);
- #else
- real_main(bist, cpu_init_detectedx);
- #endif
+#if HAVE_FAILOVER_BOOT==1
+ #if USE_FAILOVER_IMAGE==1
+ failover_process(bist, cpu_init_detectedx);
+ #endif
#else
- #if USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
- #endif
- real_main(bist, cpu_init_detectedx);
+ #if USE_FALLBACK_IMAGE == 1
+ failover_process(bist, cpu_init_detectedx);
+ #endif
#endif
+ real_main(bist, cpu_init_detectedx);
+
}
#if USE_FAILOVER_IMAGE==0
@@ -250,38 +232,38 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- (0xa<<3)|0, (0xa<<3)|2, 0, 0,
- (0xa<<3)|1, (0xa<<3)|3, 0, 0,
+ (0xa<<3)|0, (0xa<<3)|2, 0, 0,
+ (0xa<<3)|1, (0xa<<3)|3, 0, 0,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
- (0xa<<3)|4, (0xa<<3)|6, 0, 0,
- (0xa<<3)|5, (0xa<<3)|7, 0, 0,
+ (0xa<<3)|4, (0xa<<3)|6, 0, 0,
+ (0xa<<3)|5, (0xa<<3)|7, 0, 0,
#endif
};
- int needs_reset;
- unsigned bsp_apicid = 0;
+ int needs_reset;
+ unsigned bsp_apicid = 0;
- struct mem_controller ctrl[8];
- unsigned nodes;
+ struct mem_controller ctrl[8];
+ unsigned nodes;
- if (bist == 0) {
- bsp_apicid = init_cpus(cpu_init_detectedx);
- }
+ if (bist == 0) {
+ bsp_apicid = init_cpus(cpu_init_detectedx);
+ }
// post_code(0x32);
lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
+ uart_init();
+ console_init();
+
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
sio_gpio_setup();
- setup_mb_resource_map();
+ setup_mb_resource_map();
#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 0));
+ dump_pci_device(PCI_DEV(0, 0x18, 0));
dump_pci_device(PCI_DEV(0, 0x19, 0));
#endif
@@ -289,25 +271,25 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
+ // It is said that we should start core1 after all core0 launched
+ start_other_cores();
wait_all_other_cores_started(bsp_apicid);
#endif
- needs_reset |= ht_setup_chains_x();
+ needs_reset |= ht_setup_chains_x();
- needs_reset |= ck804_early_setup_x();
+ needs_reset |= ck804_early_setup_x();
- if (needs_reset) {
- print_info("ht reset -\r\n");
- // soft_reset();
- }
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ // soft_reset();
+ }
- allow_all_aps_stop(bsp_apicid);
+ allow_all_aps_stop(bsp_apicid);
- nodes = get_nodes();
- //It's the time to set ctrl now;
- fill_mem_ctrl(nodes, ctrl, spd_addr);
+ nodes = get_nodes();
+ //It's the time to set ctrl now;
+ fill_mem_ctrl(nodes, ctrl, spd_addr);
enable_smbus();
#if 0
diff --git a/src/mainboard/tyan/s2895/failover.c b/src/mainboard/tyan/s2895/failover.c
index 537abd43f4..87f4685ae8 100644
--- a/src/mainboard/tyan/s2895/failover.c
+++ b/src/mainboard/tyan/s2895/failover.c
@@ -50,14 +50,12 @@ static void sio_setup(void)
}
-
#if CONFIG_LOGICAL_CPUS==1
#include "cpu/amd/dualcore/dualcore_id.c"
#else
#include "cpu/amd/model_fxx/node_id.c"
#endif
-
static unsigned long main(unsigned long bist)
{
/* Is this a cpu only reset? */
diff --git a/src/mainboard/tyan/s2895/get_bus_conf.c b/src/mainboard/tyan/s2895/get_bus_conf.c
index 4d1451a92f..c44095b2c3 100644
--- a/src/mainboard/tyan/s2895/get_bus_conf.c
+++ b/src/mainboard/tyan/s2895/get_bus_conf.c
@@ -9,7 +9,6 @@
#include <cpu/amd/amdk8_sysconf.h>
-
// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
//busnum is default
unsigned char bus_isa;
@@ -33,7 +32,7 @@
unsigned apicid_8131_2;
unsigned apicid_ck804b;
-unsigned pci1234x[] =
+unsigned pci1234x[] =
{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
0x0000ff0,
@@ -45,7 +44,7 @@ unsigned pci1234x[] =
// 0x0000ff0,
// 0x0000ff0
};
-unsigned hcdnx[] =
+unsigned hcdnx[] =
{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
0x20202020,
0x20202020,
@@ -56,6 +55,7 @@ unsigned hcdnx[] =
// 0x20202020,
// 0x20202020,
};
+
unsigned sbdn3;
unsigned sbdnb;
@@ -97,63 +97,15 @@ void get_bus_conf(void)
dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0));
if (dev) {
bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if 0
- bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804_2++;
-#else
bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
bus_ck804_5++;
-#endif
}
else {
printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09);
bus_ck804_1 = 2;
-#if 0
- bus_ck804_2 = 3;
-#else
bus_ck804_5 = 3;
-#endif
-
- }
-#if 0
- dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0));
- if (dev) {
- bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804_3++;
- }
- else {
- printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b);
-
- bus_ck804_3 = bus_ck804_2+1;
- }
-
- dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0));
- if (dev) {
- bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804_4++;
- }
- else {
- printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c);
-
- bus_ck804_4 = bus_ck804_3+1;
- }
-
-
- dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0));
- if (dev) {
- bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804_5++;
}
- else {
- printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d);
-
- bus_ck804_5 = bus_ck804_4+1;
- }
-#endif
dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0));
if (dev) {
@@ -194,56 +146,6 @@ void get_bus_conf(void)
if(sysconf.pci1234[2] & 0x0f) { //if the second cpu is installed
bus_ck804b_0 = (sysconf.pci1234[2]>>16) & 0xff;
-#if 0
- dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09,0));
- if (dev) {
- bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804b_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804b_2++;
- }
- else {
- printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x09);
-
- bus_ck804b_1 = bus_ck804b_0+1;
- bus_ck804b_2 = bus_ck804b_0+2;
- }
-
- dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b,0));
- if (dev) {
- bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804b_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804b_3++;
- }
- else {
- printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0b);
-
- bus_ck804b_2 = bus_ck804b_0+1;
- bus_ck804b_3 = bus_ck804b_0+2;
- }
-
- dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c,0));
- if (dev) {
- bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804b_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804b_4++;
- }
- else {
- printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0c);
-
- bus_ck804b_4 = bus_ck804b_3+1;
- }
- dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d,0));
- if (dev) {
- bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_ck804b_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_ck804b_5++;
- }
- else {
- printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0d);
-
- bus_ck804b_5 = bus_ck804b_4+1;
- }
-#endif
dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e,0));
if (dev) {
@@ -253,10 +155,7 @@ void get_bus_conf(void)
}
else {
printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e);
-#if 1
bus_ck804b_5 = bus_ck804b_4+1;
-#endif
-
bus_isa = bus_ck804b_5+1;
}
}
@@ -265,12 +164,11 @@ void get_bus_conf(void)
/*I/O APICs: APIC ID Version State Address*/
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(4);
-#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
apicid_ck804 = apicid_base+0;
apicid_8131_1 = apicid_base+1;
apicid_8131_2 = apicid_base+2;
apicid_ck804b = apicid_base+3;
-
}
diff --git a/src/mainboard/tyan/s2895/irq_tables.c b/src/mainboard/tyan/s2895/irq_tables.c
index 1779644c12..cc18119120 100644
--- a/src/mainboard/tyan/s2895/irq_tables.c
+++ b/src/mainboard/tyan/s2895/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify!
+/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
@@ -12,22 +12,22 @@
#include <cpu/amd/amdk8_sysconf.h>
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
}
extern unsigned char bus_ck804_0; //1
@@ -50,6 +50,8 @@ extern unsigned char bus_ck804b_5;//f
extern unsigned sbdn3;
extern unsigned sbdnb;
+extern void get_bus_conf(void);
+
unsigned long write_pirq_routing_table(unsigned long addr)
{
@@ -59,30 +61,30 @@ unsigned long write_pirq_routing_table(unsigned long addr)
uint8_t *v;
unsigned sbdn;
- uint8_t sum=0;
- int i;
+ uint8_t sum=0;
+ int i;
- get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
sbdn = sysconf.sbdn;
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
- /* This table must be betweeen 0xf0000 & 0x100000 */
- printk_info("Writing IRQ routing tables to 0x%x...", addr);
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
pirq = (void *)(addr);
v = (uint8_t *)(addr);
-
+
pirq->signature = PIRQ_SIGNATURE;
pirq->version = PIRQ_VERSION;
-
+
pirq->rtr_bus = bus_ck804_0;
pirq->rtr_devfn = ((sbdn+9)<<3)|0;
pirq->exclusive_irqs = 0;
-
+
pirq->rtr_vendor = 0x10de;
pirq->rtr_device = 0x005c;
@@ -96,81 +98,81 @@ unsigned long write_pirq_routing_table(unsigned long addr)
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
//pcix bridge
- write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
-
- if(sysconf.pci1234[2] & 0xf) {
- //second pci beidge
- write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+
+ if(sysconf.pci1234[2] & 0xf) {
+ //second pci beidge
+ write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0);
+ pirq_info++; slot_num++;
}
#if 0
//smbus
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//usb
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//audio
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//sata
write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ pirq_info++; slot_num++;
//sata
- write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
//nic
- write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
//Slot1 PCIE x16
- write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0);
+ pirq_info++; slot_num++;
//firewire
- write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
//Slot2 pci
- write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0);
- pirq_info++; slot_num++;
-//nic
- write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
-//Slot3 PCIE x16
- write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0);
+ pirq_info++; slot_num++;
+//nic
+ write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
+//Slot3 PCIE x16
+ write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0);
+ pirq_info++; slot_num++;
//Slot4 PCIX
- write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0);
+ pirq_info++; slot_num++;
//Slot5 PCIX
- write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0);
+ pirq_info++; slot_num++;
//onboard scsi
- write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
//Slot6 PCIX
- write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0);
- pirq_info++; slot_num++;
+ write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0);
+ pirq_info++; slot_num++;
#endif
-
- pirq->size = 32 + 16 * slot_num;
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
sum = pirq->checksum - sum;
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
printk_info("done.\n");
diff --git a/src/mainboard/tyan/s2895/mptable.c b/src/mainboard/tyan/s2895/mptable.c
index 3f286d05b9..1591ec9e64 100644
--- a/src/mainboard/tyan/s2895/mptable.c
+++ b/src/mainboard/tyan/s2895/mptable.c
@@ -30,54 +30,56 @@ extern unsigned apicid_ck804b;
extern unsigned sbdn3;
extern unsigned sbdnb;
+extern void get_bus_conf(void);
+
void *smp_write_config_table(void *v)
{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "TYAN ";
- static const char productid[12] = "S2895 ";
- struct mp_config_table *mc;
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "TYAN ";
+ static const char productid[12] = "S2895 ";
+ struct mp_config_table *mc;
unsigned sbdn;
- unsigned char bus_num;
+ unsigned char bus_num;
int i;
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
get_bus_conf();
sbdn = sysconf.sbdn;
/*Bus: Bus ID Type*/
/* define bus and isa numbers */
- for(bus_num = 0; bus_num < bus_isa; bus_num++) {
- smp_write_bus(mc, bus_num, "PCI ");
- }
- smp_write_bus(mc, bus_isa, "ISA ");
+ for(bus_num = 0; bus_num < bus_isa; bus_num++) {
+ smp_write_bus(mc, bus_num, "PCI ");
+ }
+ smp_write_bus(mc, bus_isa, "ISA ");
/*I/O APICs: APIC ID Version State Address*/
- {
- device_t dev;
+ {
+ device_t dev;
struct resource *res;
uint32_t dword;
- dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0));
- if (dev) {
+ dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_1);
if (res) {
smp_write_ioapic(mc, apicid_ck804, 0x11, res->base);
@@ -86,53 +88,53 @@ void *smp_write_config_table(void *v)
/* Initialize interrupt mapping*/
dword = 0x0120d218;
- pci_write_config32(dev, 0x7c, dword);
+ pci_write_config32(dev, 0x7c, dword);
- dword = 0x12008a00;
- pci_write_config32(dev, 0x80, dword);
+ dword = 0x12008a00;
+ pci_write_config32(dev, 0x80, dword);
- dword = 0x00080d7d;
- pci_write_config32(dev, 0x84, dword);
+ dword = 0x00080d7d;
+ pci_write_config32(dev, 0x84, dword);
- }
+ }
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1));
- if (dev) {
+ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res) {
smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base);
}
- }
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1));
- if (dev) {
+ }
+ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (res) {
smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base);
}
- }
+ }
if(sysconf.pci1234[2] & 0xf) {
- dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0));
- if (dev) {
+ dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0));
+ if (dev) {
res = find_resource(dev, PCI_BASE_ADDRESS_1);
if (res) {
smp_write_ioapic(mc, apicid_ck804b, 0x11, res->base);
}
dword = 0x0000d218;
- pci_write_config32(dev, 0x7c, dword);
+ pci_write_config32(dev, 0x7c, dword);
- dword = 0x00000000;
- pci_write_config32(dev, 0x80, dword);
+ dword = 0x00000000;
+ pci_write_config32(dev, 0x80, dword);
- dword = 0x00000d00;
- pci_write_config32(dev, 0x84, dword);
+ dword = 0x00000d00;
+ pci_write_config32(dev, 0x84, dword);
- }
+ }
}
}
-
+
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
*/ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_ck804, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_ck804, 0x1);
@@ -148,73 +150,73 @@ void *smp_write_config_table(void *v)
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf);
// Onboard ck804 smbus
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa);
// 10
// Onboard ck804 USB 1.1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21
// Onboard ck804 USB 2
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20
// Onboard ck804 Audio
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+4)<<2)|0, apicid_ck804, 0x14); // 20
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+4)<<2)|0, apicid_ck804, 0x14); // 20
// Onboard ck804 SATA 0
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23
// Onboard ck804 SATA 1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22
// Onboard ck804 NIC
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21
//Slot 1 PCIE x16
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4);
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4);
+ }
//Onboard Firewire
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x05<<2)|0, apicid_ck804, 0x13); // 19
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x05<<2)|0, apicid_ck804, 0x13); // 19
//Slot 2 PCI 32
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4);
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4);
+ }
if(sysconf.pci1234[2] & 0xf) {
//Onboard ck804b NIC
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53
//Slot 3 PCIE x16
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|i, apicid_ck804b, 0x10 + (2+i+4-sbdnb%4)%4);
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|i, apicid_ck804b, 0x10 + (2+i+4-sbdnb%4)%4);
+ }
}
//Channel B of 8131
//Slot 4 PCI-X 100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|i, apicid_8131_2, (0+i)%4);
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|i, apicid_8131_2, (0+i)%4);
+ }
//Slot 5 PCIX 100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (1+i)%4); // 29
- }
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (1+i)%4); // 29
+ }
//OnBoard LSI SCSI
- for(i=0;i<2;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (2+i)%4); //30
- }
+ for(i=0;i<2;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (2+i)%4); //30
+ }
//Channel A of 8131
-//Slot 6 PCIX 133/100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|i, apicid_8131_1, (0+i)%4); //24
- }
+//Slot 6 PCIX 133/100/66
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|i, apicid_8131_1, (0+i)%4); //24
+ }
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);