summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/kontron/986lcd-m/Config.lb10
-rw-r--r--src/mainboard/kontron/986lcd-m/Options.lb21
-rw-r--r--src/southbridge/intel/i82801gx/Config.lb4
-rw-r--r--src/southbridge/intel/i82801gx/IOMAP35
-rw-r--r--src/southbridge/intel/i82801gx/chip.h41
-rw-r--r--src/southbridge/intel/i82801gx/cmos_failover.c10
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx.c16
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx.h10
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_ac97.c9
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_azalia.c226
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_early_smbus.c12
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_ide.c40
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_lpc.c132
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_nic.c10
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_pci.c67
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_pcie.c93
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_reset.c10
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_sata.c83
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_smbus.c49
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_smbus.h133
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_usb.c26
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_usb_debug.c36
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c69
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_watchdog.c10
24 files changed, 760 insertions, 392 deletions
diff --git a/src/mainboard/kontron/986lcd-m/Config.lb b/src/mainboard/kontron/986lcd-m/Config.lb
index 3e378273c2..e5d110c130 100644
--- a/src/mainboard/kontron/986lcd-m/Config.lb
+++ b/src/mainboard/kontron/986lcd-m/Config.lb
@@ -190,12 +190,18 @@ chip northbridge/intel/i945
chip southbridge/intel/i82801gx
register "pirqa_routing" = "0x05"
register "pirqb_routing" = "0x07"
- register "pirqc_routing" = "0x06"
+ register "pirqc_routing" = "0x05"
register "pirqd_routing" = "0x07"
register "pirqe_routing" = "0x80"
register "pirqf_routing" = "0x80"
register "pirqg_routing" = "0x80"
- register "pirqh_routing" = "0x05"
+ register "pirqh_routing" = "0x06"
+
+ # GPI routing
+ # 0 No effect (default)
+ # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ # 2 SCI (if corresponding GPIO_EN bit is also set)
+ register "gpi13_routing" = "1"
register "ide_legacy_combined" = "0x1"
register "ide_enable_primary" = "0x1"
diff --git a/src/mainboard/kontron/986lcd-m/Options.lb b/src/mainboard/kontron/986lcd-m/Options.lb
index 40a8a796fb..d774949100 100644
--- a/src/mainboard/kontron/986lcd-m/Options.lb
+++ b/src/mainboard/kontron/986lcd-m/Options.lb
@@ -69,6 +69,9 @@ uses XIP_ROM_SIZE
uses HAVE_HARD_RESET
uses HAVE_SMI_HANDLER
uses CONFIG_PCIE_CONFIGSPACE_HOLE
+uses MMCONF_SUPPORT
+uses MMCONF_BASE_ADDRESS
+uses CONFIG_GFXUMA
#
uses MAINBOARD
uses MAINBOARD_PART_NUMBER
@@ -86,7 +89,9 @@ uses TTYS0_LCS
uses DEFAULT_CONSOLE_LOGLEVEL
uses MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_VGA
+uses CONFIG_VGA_ROM_RUN
uses CONFIG_PCI_ROM_RUN
+uses DEBUG
# Toolchain
uses CC
uses HOSTCC
@@ -145,6 +150,13 @@ default HAVE_SMI_HANDLER=1
##
default CONFIG_PCIE_CONFIGSPACE_HOLE=1
+default MMCONF_SUPPORT=1
+default MMCONF_BASE_ADDRESS=0xf0000000
+
+##
+## UMA
+##
+default CONFIG_GFXUMA=1
##
## Build code to export a programmable irq routing table
@@ -163,7 +175,7 @@ default HAVE_MP_TABLE=1
##
default HAVE_ACPI_TABLES=1
default HAVE_MAINBOARD_RESOURCES=1
-default HAVE_HIGH_TABLES=0
+default HAVE_HIGH_TABLES=1
##
## Build code to export a CMOS option table
@@ -179,7 +191,12 @@ default LB_CKS_LOC=123
#VGA Console
default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
+# There are some network option roms that don't work with
+# coreboot's x86emu. Thus, we only execute the VGA option rom
+# for now:
+default CONFIG_VGA_ROM_RUN=1
+default CONFIG_PCI_ROM_RUN=0
+default DEBUG=0
##
## Build code for SMP support
diff --git a/src/southbridge/intel/i82801gx/Config.lb b/src/southbridge/intel/i82801gx/Config.lb
index 6e5cba2338..53186ed293 100644
--- a/src/southbridge/intel/i82801gx/Config.lb
+++ b/src/southbridge/intel/i82801gx/Config.lb
@@ -5,8 +5,7 @@
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
+## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -30,6 +29,7 @@ driver i82801gx_nic.o
driver i82801gx_pci.o
driver i82801gx_pcie.o
driver i82801gx_sata.o
+driver i82801gx_smbus.o
driver i82801gx_usb.o
driver i82801gx_usb_ehci.o
diff --git a/src/southbridge/intel/i82801gx/IOMAP b/src/southbridge/intel/i82801gx/IOMAP
deleted file mode 100644
index 6c20f667d7..0000000000
--- a/src/southbridge/intel/i82801gx/IOMAP
+++ /dev/null
@@ -1,35 +0,0 @@
-Non-automatic IO-Addresses
---------------------------
-
-The following dynamic IO BARs are used on the ICH7 for the Kontron Default BIOS:
-
-GPIOBASE 0x480 (64 bytes)
-PMBASE 0x800 (128 bytes)
-SMBASE 0x400 (32 bytes)
-HWMON 0xa00 (??)
-
-The following dynamic IO BARs are used on the ICH7 for the Getac Default BIOS:
-
-GPIOBASE 0x1180 (64 bytes)
-PMBASE 0x1000 (128 bytes)
-SMBASE 0x18e0 (32 bytes)
-
-The Getac also needs an IO Trapped area of 0x0C bytes (defaults to 0x800)
-
-coreboot:
-GPIOBASE 0x480 (64 bytes)
-PMBASE 0x500 (128 bytes)
-SMBASE 0x400 (32 bytes)
-HWMON 0xa00 (??)
-
-
-
-NOTE: Coreboot sets the SMBASE to 0xf00 in auto.c. But it gets relocated
-in stage2 because its a "normal BAR" (to 0x2080 in one case here).
-
-This is not unhealthy but at least confusing. We should provide a method to
-nail down certain resources for stage2.
-
-For a list of static I/O space allocation look at 6.3.1 of the ICH7 Family
-Datasheet.
-
diff --git a/src/southbridge/intel/i82801gx/chip.h b/src/southbridge/intel/i82801gx/chip.h
index 45c011a1c0..7fca7ca9f3 100644
--- a/src/southbridge/intel/i82801gx/chip.h
+++ b/src/southbridge/intel/i82801gx/chip.h
@@ -3,10 +3,10 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -22,7 +22,10 @@
#define SOUTHBRIDGE_INTEL_I82801GX_CHIP_H
struct southbridge_intel_i82801gx_config {
- /* LPC configuration */
+ /**
+ * Interrupt Routing configuration
+ * If bit7 is 1, the interrupt is disabled.
+ */
uint8_t pirqa_routing;
uint8_t pirqb_routing;
uint8_t pirqc_routing;
@@ -32,6 +35,32 @@ struct southbridge_intel_i82801gx_config {
uint8_t pirqg_routing;
uint8_t pirqh_routing;
+ /**
+ * GPI Routing configuration
+ *
+ * Only the lower two bits have a meaning:
+ * 00: No effect
+ * 01: SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ * 10: SCI (if corresponding GPIO_EN bit is also set)
+ * 11: reserved
+ */
+ uint8_t gpi0_routing;
+ uint8_t gpi1_routing;
+ uint8_t gpi2_routing;
+ uint8_t gpi3_routing;
+ uint8_t gpi4_routing;
+ uint8_t gpi5_routing;
+ uint8_t gpi6_routing;
+ uint8_t gpi7_routing;
+ uint8_t gpi8_routing;
+ uint8_t gpi9_routing;
+ uint8_t gpi10_routing;
+ uint8_t gpi11_routing;
+ uint8_t gpi12_routing;
+ uint8_t gpi13_routing;
+ uint8_t gpi14_routing;
+ uint8_t gpi15_routing;
+
/* IDE configuration */
uint32_t ide_legacy_combined;
uint32_t ide_enable_primary;
@@ -39,7 +68,7 @@ struct southbridge_intel_i82801gx_config {
uint32_t sata_ahci;
/* Azalia Configuration */
- unsigned long hda_viddid;
+ uint32_t hda_viddid;
};
extern struct chip_operations southbridge_intel_i82801gx_ops;
diff --git a/src/southbridge/intel/i82801gx/cmos_failover.c b/src/southbridge/intel/i82801gx/cmos_failover.c
index ec5ec6a34b..0765404ceb 100644
--- a/src/southbridge/intel/i82801gx/cmos_failover.c
+++ b/src/southbridge/intel/i82801gx/cmos_failover.c
@@ -1,10 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/src/southbridge/intel/i82801gx/i82801gx.c b/src/southbridge/intel/i82801gx/i82801gx.c
index 9d504fbe0b..fb8e952eed 100644
--- a/src/southbridge/intel/i82801gx/i82801gx.c
+++ b/src/southbridge/intel/i82801gx/i82801gx.c
@@ -1,12 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -25,6 +25,12 @@
void i82801gx_enable(device_t dev)
{
+ u32 reg32;
+
+ /* Enable SERR */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 |= PCI_COMMAND_SERR;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
}
struct chip_operations southbridge_intel_i82801gx_ops = {
diff --git a/src/southbridge/intel/i82801gx/i82801gx.h b/src/southbridge/intel/i82801gx/i82801gx.h
index 9ea0f1fee9..a1771230fc 100644
--- a/src/southbridge/intel/i82801gx/i82801gx.h
+++ b/src/southbridge/intel/i82801gx/i82801gx.h
@@ -1,12 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/src/southbridge/intel/i82801gx/i82801gx_ac97.c b/src/southbridge/intel/i82801gx/i82801gx_ac97.c
index 4253284452..e78b1eb282 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_ac97.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_ac97.c
@@ -3,10 +3,10 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -119,7 +119,6 @@ static void program_sigid(struct device *dev, u32 id)
static void ac97_audio_init(struct device *dev)
{
- u8 reg8;
u16 reg16;
u32 reg32;
int i;
diff --git a/src/southbridge/intel/i82801gx/i82801gx_azalia.c b/src/southbridge/intel/i82801gx/i82801gx_azalia.c
index 067d0f3980..fba46bae7c 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_azalia.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_azalia.c
@@ -31,61 +31,63 @@
#define HDA_ICII_BUSY (1 << 0)
#define HDA_ICII_VALID (1 << 1)
+typedef struct southbridge_intel_i82801gx_config config_t;
+
static int set_bits(u8 * port, u32 mask, u32 val)
{
- u32 dword;
+ u32 reg32;
int count;
+ /* Write (val & mask) to port */
val &= mask;
- dword = readl(port);
- dword &= ~mask;
- dword |= val;
- writel(dword, port);
-
+ reg32 = readl(port);
+ reg32 &= ~mask;
+ reg32 |= val;
+ writel(reg32, port);
+
+ /* Wait for readback of register to
+ * match what was just written to it
+ */
count = 50;
do {
- dword = readl(port);
- dword &= mask;
- udelay(100);
- } while ((dword != val) && --count);
+ /* Wait 1ms based on BKDG wait time */
+ mdelay(1);
+ reg32 = readl(port);
+ reg32 &= mask;
+ } while ((reg32 != val) && --count);
+ /* Timeout occured */
if (!count)
return -1;
-
- udelay(540);
return 0;
}
static int codec_detect(u8 * base)
{
- u32 dword;
-
- /* 1 */
- set_bits(base + 0x08, 1, 1);
-
- /* 2 */
- dword = readl(base + 0x0e);
- dword |= 7;
- writel(dword, base + 0x0e);
-
- /* 3 */
+ u32 reg32;
+
+ /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */
+ if (set_bits(base + 0x08, 1, 0) == -1)
+ goto no_codec;
+
+ /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
+ if (set_bits(base + 0x08, 1, 1) == -1)
+ goto no_codec;
+
+ /* Read in Codec location (BAR + 0xe)[2..0]*/
+ reg32 = readl(base + 0xe);
+ reg32 &= 0x0f;
+ if (!reg32)
+ goto no_codec;
+
+ return reg32;
+
+no_codec:
+ /* Codec Not found */
+ /* Put HDA back in reset (BAR + 0x8) [0] */
set_bits(base + 0x08, 1, 0);
-
- /* 4 */
- set_bits(base + 0x08, 1, 1);
-
- /* 5 */
- dword = readl(base + 0xe);
- dword &= 7;
-
- /* 6 */
- if (!dword) {
- set_bits(base + 0x08, 1, 0);
- printk_debug("No codec!\n");
- return 0;
- }
- return dword;
-
+ printk_debug("Azalia: No codec!\n");
+ return 0;
}
static u32 cim_verb_data[] = {
@@ -156,19 +158,24 @@ static u32 cim_verb_data[] = {
0x01F71F41,
};
-static unsigned find_verb(u32 viddid, u32 ** verb)
+static unsigned find_verb(struct device *dev, u32 viddid, u32 ** verb)
{
- device_t azalia_dev = dev_find_slot(0, PCI_DEVFN(0x14, 2));
- struct southbridge_intel_i82801gx_config *cfg =
- (struct southbridge_intel_i82801gx_config *)azalia_dev->chip_info;
- printk_debug("Dev=%s\n", dev_path(azalia_dev));
- printk_debug("Default viddid=%x\n", cfg->hda_viddid);
- printk_debug("Reading viddid=%x\n", viddid);
- if (!cfg)
+ config_t *config = dev->chip_info;
+
+ if (config == NULL) {
+ printk_err("\ni82801gx_azalia: Not mentioned in mainboard's Config.lb!\n");
return 0;
- if (viddid != cfg->hda_viddid)
+ }
+
+ printk_debug("Azalia: dev=%s\n", dev_path(dev));
+ printk_debug("Azalia: Default viddid=%x\n", (u32)config->hda_viddid);
+ printk_debug("Azalia: Reading viddid=%x\n", viddid);
+
+ if (viddid != config->hda_viddid)
return 0;
+
*verb = (u32 *) cim_verb_data;
+
return sizeof(cim_verb_data) / sizeof(u32);
}
@@ -185,8 +192,8 @@ static int wait_for_ready(u8 *base)
int timeout = 50;
while(timeout--) {
- u32 dword=readl(base + HDA_ICII_REG);
- if (!(dword & HDA_ICII_BUSY))
+ u32 reg32 = readl(base + HDA_ICII_REG);
+ if (!(reg32 & HDA_ICII_BUSY))
return 0;
udelay(1);
}
@@ -207,8 +214,8 @@ static int wait_for_valid(u8 *base)
int timeout = 50;
while(timeout--) {
- u32 dword = readl(base + HDA_ICII_REG);
- if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
+ u32 reg32 = readl(base + HDA_ICII_REG);
+ if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
HDA_ICII_VALID)
return 0;
udelay(1);
@@ -217,9 +224,9 @@ static int wait_for_valid(u8 *base)
return 1;
}
-static void codec_init(u8 * base, int addr)
+static void codec_init(struct device *dev, u8 * base, int addr)
{
- u32 dword;
+ u32 reg32;
u32 *verb;
u32 verb_size;
int i;
@@ -228,24 +235,24 @@ static void codec_init(u8 * base, int addr)
if (wait_for_ready(base) == -1)
return;
- dword = (addr << 28) | 0x000f0000;
- writel(dword, base + 0x60);
+ reg32 = (addr << 28) | 0x000f0000;
+ writel(reg32, base + 0x60);
if (wait_for_valid(base) == -1)
return;
- dword = readl(base + 0x64);
+ reg32 = readl(base + 0x64);
/* 2 */
- printk_debug("codec viddid: %08x\n", dword);
- verb_size = find_verb(dword, &verb);
+ printk_debug("Azalia: codec viddid: %08x\n", reg32);
+ verb_size = find_verb(dev, reg32, &verb);
if (!verb_size) {
- printk_debug("No verb!\n");
+ printk_debug("Azalia: No verb!\n");
return;
}
- printk_debug("verb_size: %d\n", verb_size);
+ printk_debug("Azalia: verb_size: %d\n", verb_size);
/* 3 */
for (i = 0; i < verb_size; i++) {
if (wait_for_ready(base) == -1)
@@ -256,15 +263,15 @@ static void codec_init(u8 * base, int addr)
if (wait_for_valid(base) == -1)
return;
}
- printk_debug("verb loaded!\n");
+ printk_debug("Azalia: verb loaded.\n");
}
-static void codecs_init(u8 * base, u32 codec_mask)
+static void codecs_init(struct device *dev, u8 * base, u32 codec_mask)
{
int i;
for (i = 2; i >= 0; i--) {
if (codec_mask & (1 << i))
- codec_init(base, i);
+ codec_init(dev, base, i);
}
}
@@ -273,7 +280,71 @@ static void azalia_init(struct device *dev)
u8 *base;
struct resource *res;
u32 codec_mask;
-
+ u8 reg8;
+ u32 reg32;
+
+#if MMCONF_SUPPORT
+ // ESD
+ reg32 = pci_mmio_read_config32(dev, 0x134);
+ reg32 &= 0xff00ffff;
+ reg32 |= (2 << 16);
+ pci_mmio_write_config32(dev, 0x134, reg32);
+
+ // Link1 description
+ reg32 = pci_mmio_read_config32(dev, 0x140);
+ reg32 &= 0xff00ffff;
+ reg32 |= (2 << 16);
+ pci_mmio_write_config32(dev, 0x140, reg32);
+
+ // Port VC0 Resource Control Register
+ reg32 = pci_mmio_read_config32(dev, 0x114);
+ reg32 &= 0xffffff00;
+ reg32 |= 1;
+ pci_mmio_write_config32(dev, 0x114, reg32);
+
+ // VCi traffic class
+ reg8 = pci_mmio_read_config8(dev, 0x44);
+ reg8 |= (7 << 0); // TC7
+ pci_mmio_write_config8(dev, 0x44, reg8);
+
+ // VCi Resource Control
+ reg32 = pci_mmio_read_config32(dev, 0x120);
+ reg32 |= (1 << 31);
+ reg32 |= (1 << 24); // VCi ID
+ reg32 |= (0x80 << 0); // VCi map
+ pci_mmio_write_config32(dev, 0x120, reg32);
+#else
+#error ICH7 Azalia required MMCONF_SUPPORT
+#endif
+
+ /* Set Bus Master */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
+
+ pci_write_config8(dev, 0x3c, 0x0a); // unused?
+
+ // TODO Actually check if we're AC97 or HDA instead of hardcoding this
+ // here, in Config.lb and/or auto.c.
+ reg8 = pci_read_config8(dev, 0x40);
+ reg8 |= (1 << 3); // Clear Clock Detect Bit
+ pci_write_config8(dev, 0x40, reg8);
+ reg8 &= ~(1 << 3); // Keep CLKDETCLR from clearing the bit over and over
+ pci_write_config8(dev, 0x40, reg8);
+ reg8 |= (1 << 2); // Enable clock detection
+ pci_write_config8(dev, 0x40, reg8);
+ mdelay(1);
+ reg8 = pci_read_config8(dev, 0x40);
+ printk_debug("Azalia: codec type: %s\n", (reg8 & (1 << 1))?"Azalia":"AC97");
+
+ //
+ reg8 = pci_read_config8(dev, 0x40); // Audio Control
+ reg8 |= 1; // Select Azalia mode. This needs to be controlled via Config.lb
+ pci_write_config8(dev, 0x40, reg8);
+
+ reg8 = pci_read_config8(dev, 0x4d); // Docking Status
+ reg8 &= ~(1 << 7); // Docking not supported
+ pci_write_config8(dev, 0x4d, reg8);
+#if 0
/* Set routing pin */
pci_write_config32(dev, 0xf8, 0x0);
pci_write_config8(dev, 0xfc, 0xAA);
@@ -283,21 +354,39 @@ static void azalia_init(struct device *dev)
/* Enable azalia, disable ac97 */
// pm_iowrite(0x59, 0xB);
+#endif
res = find_resource(dev, 0x10);
if (!res)
return;
+ // NOTE this will break as soon as the Azalia get's a bar above
+ // 4G. Is there anything we can do about it?
base = (u8 *) ((u32)res->base);
- printk_debug("base = %08x\n", base);
+ printk_debug("Azalia: base = %08x\n", (u32)base);
codec_mask = codec_detect(base);
if (codec_mask) {
- printk_debug("codec_mask = %02x\n", codec_mask);
- codecs_init(base, codec_mask);
+ printk_debug("Azalia: codec_mask = %02x\n", codec_mask);
+ codecs_init(dev, base, codec_mask);
}
}
+static void azalia_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations azalia_pci_ops = {
+ .set_subsystem = azalia_set_subsystem,
+};
+
static struct device_operations azalia_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
@@ -305,6 +394,7 @@ static struct device_operations azalia_ops = {
.init = azalia_init,
.scan_bus = 0,
.enable = i82801gx_enable,
+ .ops_pci = &azalia_pci_ops,
};
/* 82801GB/GR/GDH/GBM/GHM (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH) */
diff --git a/src/southbridge/intel/i82801gx/i82801gx_early_smbus.c b/src/southbridge/intel/i82801gx/i82801gx_early_smbus.c
index 5fe1daa279..7c0d97d2c8 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_early_smbus.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_early_smbus.c
@@ -1,12 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -54,6 +54,6 @@ static void enable_smbus(void)
static inline int smbus_read_byte(unsigned device, unsigned address)
{
- return do_smbus_read_byte(device, address);
+ return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
}
diff --git a/src/southbridge/intel/i82801gx/i82801gx_ide.c b/src/southbridge/intel/i82801gx/i82801gx_ide.c
index 0074cc7b2a..c29e678a69 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_ide.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_ide.c
@@ -1,12 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -30,12 +30,20 @@ static void ide_init(struct device *dev)
{
u16 ideTimingConfig;
u32 reg32;
+ u32 enable_primary, enable_secondary;
/* Get the chip configuration */
config_t *config = dev->chip_info;
- int enable_primary = config->ide_enable_primary;
- int enable_secondary = config->ide_enable_secondary;
+ printk_debug("i82801gx_ide: initializing... ");
+ if (config == NULL) {
+ printk_err("\ni82801gx_ide: Not mentioned in mainboard's Config.lb!\n");
+ // Trying to set somewhat save defaults instead of bailing out.
+ enable_primary = enable_secondary = 1;
+ } else {
+ enable_primary = config->ide_enable_primary;
+ enable_secondary = config->ide_enable_secondary;
+ }
reg32 = pci_read_config32(dev, PCI_COMMAND);
pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_IO | PCI_COMMAND_MASTER);
@@ -81,8 +89,25 @@ static void ide_init(struct device *dev)
/* Set Interrupt Line */
/* Interrupt Pin is set by D31IP.PIP */
pci_write_config32(dev, INTR_LN, 0xff); /* Int 15 */
+
+ printk_debug("\n");
+}
+
+static void ide_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
}
+static struct pci_operations ide_pci_ops = {
+ .set_subsystem = ide_set_subsystem,
+};
+
static struct device_operations ide_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
@@ -90,6 +115,7 @@ static struct device_operations ide_ops = {
.init = ide_init,
.scan_bus = 0,
.enable = i82801gx_enable,
+ .ops_pci = &ide_pci_ops,
};
/* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */
diff --git a/src/southbridge/intel/i82801gx/i82801gx_lpc.c b/src/southbridge/intel/i82801gx/i82801gx_lpc.c
index 78c4efe3b0..241d610bdd 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_lpc.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_lpc.c
@@ -3,10 +3,10 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -151,6 +151,35 @@ static void i82801gx_pirq_init(device_t dev)
}
}
+static void i82801gx_gpi_routing(device_t dev)
+{
+ /* Get the chip configuration */
+ config_t *config = dev->chip_info;
+ u32 reg32 = 0;
+
+ /* An array would be much nicer here, or some
+ * other method of doing this.
+ */
+ reg32 |= (config->gpi0_routing & 0x03) << 0;
+ reg32 |= (config->gpi1_routing & 0x03) << 2;
+ reg32 |= (config->gpi2_routing & 0x03) << 4;
+ reg32 |= (config->gpi3_routing & 0x03) << 6;
+ reg32 |= (config->gpi4_routing & 0x03) << 8;
+ reg32 |= (config->gpi5_routing & 0x03) << 10;
+ reg32 |= (config->gpi6_routing & 0x03) << 12;
+ reg32 |= (config->gpi7_routing & 0x03) << 14;
+ reg32 |= (config->gpi8_routing & 0x03) << 16;
+ reg32 |= (config->gpi9_routing & 0x03) << 18;
+ reg32 |= (config->gpi10_routing & 0x03) << 20;
+ reg32 |= (config->gpi11_routing & 0x03) << 22;
+ reg32 |= (config->gpi12_routing & 0x03) << 24;
+ reg32 |= (config->gpi13_routing & 0x03) << 26;
+ reg32 |= (config->gpi14_routing & 0x03) << 28;
+ reg32 |= (config->gpi15_routing & 0x03) << 30;
+
+ pci_write_config32(dev, 0xb8, reg32);
+}
+
static void i82801gx_power_options(device_t dev)
{
u8 reg8;
@@ -172,6 +201,7 @@ static void i82801gx_power_options(device_t dev)
reg8 |= 1;
}
reg8 |= (3 << 4); /* avoid #S4 assertions */
+ reg8 &= ~(1 << 3); /* minimum asssertion is 1 to 2 RTCCLK */
pci_write_config8(dev, GEN_PMCON_3, reg8);
printk_info("Set power %s after power failure.\n", pwr_on ? "on" : "off");
@@ -198,19 +228,34 @@ static void i82801gx_power_options(device_t dev)
// Enable CPU_SLP# and Intel Speedstep, set SMI# rate down
reg16 = pci_read_config16(dev, GEN_PMCON_1);
- reg16 &= ~3;
- reg16 |= (1 << 3) | (1 << 5) | (1 << 10);
+ reg16 &= ~((3 << 0) | (1 << 10));
+ reg16 |= (1 << 3) | (1 << 5);
+ reg16 |= (1 << 2); // CLKRUN_EN
pci_write_config16(dev, GEN_PMCON_1, reg16);
- // Set GPIO13 to SCI (?)
- // This might be board specific
- pci_write_config32(dev, 0xb8, 0x08000000);
+ // Set the board's GPI routing.
+ i82801gx_gpi_routing(dev);
}
-void i82801gx_rtc_init(struct device *dev)
+static void i82801gx_configure_cstates(device_t dev)
+{
+ u8 reg8;
+
+ reg8 = pci_read_config8(dev, 0xa9); // Cx state configuration
+ reg8 |= (1 << 4) | (1 << 3) | (1 << 2); // Enable Popup & Popdown
+ pci_write_config8(dev, 0xa9, reg8);
+
+ // Set Deeper Sleep configuration to recommended values
+ reg8 = pci_read_config8(dev, 0xaa);
+ reg8 &= 0xf0;
+ reg8 |= (2 << 2); // Deeper Sleep to Stop CPU: 34-40us
+ reg8 |= (2 << 0); // Deeper Sleep to Sleep: 15us
+ pci_write_config8(dev, 0xaa, reg8);
+}
+
+static void i82801gx_rtc_init(struct device *dev)
{
u8 reg8;
- u32 reg32;
int rtc_failed;
reg8 = pci_read_config8(dev, GEN_PMCON_3);
@@ -224,17 +269,40 @@ void i82801gx_rtc_init(struct device *dev)
rtc_init(rtc_failed);
}
-static void enable_hpet(struct device *dev)
+static void enable_hpet(void)
{
- /* TODO */
+ u32 reg32;
+
+ /* Leave HPET at default address, but enable it */
+ reg32 = RCBA32(0x3404);
+ reg32 |= (1 << 7); // HPET Address Enable
+ RCBA32(0x3404) = reg32;
}
+static void enable_clock_gating(void)
+{
+ u32 reg32;
+
+ /* Enable Clock Gating for most devices */
+ reg32 = RCBA32(0x341c);
+ reg32 |= (1 << 31); // LPC clock gating
+ reg32 |= (1 << 30); // PATA clock gating
+ // SATA clock gating
+ reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24);
+ reg32 |= (1 << 23); // AC97 clock gating
+ reg32 |= (1 << 20) | (1 << 19); // USB EHCI clock gating
+ reg32 |= (1 << 3) | (1 << 1); // DMI clock gating
+ reg32 |= (1 << 2); // PCIe clock gating;
+ RCBA32(0x341c) = reg32;
+}
#if HAVE_SMI_HANDLER
static void i82801gx_lock_smm(struct device *dev)
{
void smm_lock(void);
+#if TEST_SMM_FLASH_LOCKDOWN
u8 reg8;
+#endif
#if ENABLE_ACPI_MODE_IN_COREBOOT
printk_debug("Enabling ACPI via APMC:\n");
@@ -279,6 +347,22 @@ static void i82801gx_lock_smm(struct device *dev)
}
#endif
+#define SPIBASE 0x3020
+static void i82801gx_spi_init(void)
+{
+ u16 spicontrol;
+
+ spicontrol = RCBA16(SPIBASE + 2);
+ spicontrol &= ~(1 << 0); // SPI Access Request
+ RCBA16(SPIBASE + 2) = spicontrol;
+}
+
+static void i82801gx_fixups(void)
+{
+ /* This needs to happen after PCI enumeration */
+ RCBA32(0x1d40) |= 1;
+}
+
static void lpc_init(struct device *dev)
{
printk_debug("i82801gx: lpc_init\n");
@@ -297,6 +381,9 @@ static void lpc_init(struct device *dev)
/* Setup power options. */
i82801gx_power_options(dev);
+ /* Configure Cx state registers */
+ i82801gx_configure_cstates(dev);
+
/* Set the state of the GPIO lines. */
//gpio_init(dev);
@@ -307,13 +394,20 @@ static void lpc_init(struct device *dev)
isa_dma_init();
/* Initialize the High Precision Event Timers, if present. */
- enable_hpet(dev);
+ enable_hpet();
+
+ /* Initialize Clock Gating */
+ enable_clock_gating();
setup_i8259();
#if HAVE_SMI_HANDLER
i82801gx_lock_smm(dev);
#endif
+
+ i82801gx_spi_init();
+
+ i82801gx_fixups();
}
static void i82801gx_lpc_read_resources(device_t dev)
@@ -341,9 +435,13 @@ static void i82801gx_lpc_enable_resources(device_t dev)
static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
- printk_debug("Setting LPC bridge subsystem ID\n");
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, 0));
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
}
static struct pci_operations pci_ops = {
diff --git a/src/southbridge/intel/i82801gx/i82801gx_nic.c b/src/southbridge/intel/i82801gx/i82801gx_nic.c
index 9790dac85f..0405294cb7 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_nic.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_nic.c
@@ -1,12 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/src/southbridge/intel/i82801gx/i82801gx_pci.c b/src/southbridge/intel/i82801gx/i82801gx_pci.c
index b2e4ce5561..2bf228b135 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_pci.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_pci.c
@@ -3,10 +3,10 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -26,31 +26,42 @@
static void pci_init(struct device *dev)
{
u16 reg16;
+ u8 reg8;
-#if 0
- /* Commented out for now because it will break on some machines. */
- /* Set latency timer to 32. */
- pci_write_config16(dev, 0x1b, 0x20);
-#endif
+ /* Enable Bus Master */
+ reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 |= PCI_COMMAND_MASTER;
+ pci_write_config16(dev, PCI_COMMAND, reg16);
+
+ /* This device has no interrupt */
+ pci_write_config8(dev, 0x3c, 0xff);
- /* disable parity error response */
+ /* disable parity error response and SERR */
reg16 = pci_read_config16(dev, 0x3e);
reg16 &= ~(1 << 0);
+ reg16 &= ~(1 << 1);
pci_write_config16(dev, 0x3e, reg16);
+ /* Master Latency Count must be set to 0x04! */
+ reg8 = pci_read_config8(dev, 0x1b);
+ reg8 &= 0x07;
+ reg8 |= (0x04 << 3);
+ pci_write_config8(dev, 0x1b, reg8);
+
+ /* Will this improve throughput of bus masters? */
+ pci_write_config8(dev, PCI_MIN_GNT, 0x06);
+
/* Clear errors in status registers */
reg16 = pci_read_config16(dev, 0x06);
- reg16 |= 0xf900;
+ //reg16 |= 0xf900;
pci_write_config16(dev, 0x06, reg16);
reg16 = pci_read_config16(dev, 0x1e);
- reg16 |= 0xf900;
+ // reg16 |= 0xf900;
pci_write_config16(dev, 0x1e, reg16);
-
- /* Will this improve throughput of bus masters? */
- pci_write_config8(dev, PCI_MIN_GNT, 0x06);
}
+#undef PCI_BRIDGE_UPDATE_COMMAND
static void ich_pci_dev_enable_resources(struct device *dev)
{
const struct pci_operations *ops;
@@ -68,15 +79,17 @@ static void ich_pci_dev_enable_resources(struct device *dev)
MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
}
-#if 0
+ command = pci_read_config16(dev, PCI_COMMAND);
+ command |= dev->command;
+#if PCI_BRIDGE_UPDATE_COMMAND
/* If we write to PCI_COMMAND, on some systems
* this will cause the ROM and APICs not being visible
* anymore.
*/
- command = pci_read_config16(dev, PCI_COMMAND);
- command |= dev->command;
printk_debug("%s cmd <- %02x\n", dev_path(dev), command);
pci_write_config16(dev, PCI_COMMAND, command);
+#else
+ printk_debug("%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command);
#endif
}
@@ -102,16 +115,14 @@ static void ich_pci_bus_enable_resources(struct device *dev)
static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
-#if 0
- /* Currently disabled because it causes a "BAR 9" memory resource
- * conflict:
- */
- u32 pci_id;
-
- printk_debug("Setting PCI bridge subsystem ID\n");
- pci_id = pci_read_config32(dev, 0);
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, pci_id );
-#endif
+ /* NOTE: This is not the default position! */
+ if (!vendor || !device) {
+ pci_write_config32(dev, 0x54,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, 0x54,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
}
static struct pci_operations pci_ops = {
diff --git a/src/southbridge/intel/i82801gx/i82801gx_pcie.c b/src/southbridge/intel/i82801gx/i82801gx_pcie.c
index 882c3e4a78..6965b30972 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_pcie.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_pcie.c
@@ -3,10 +3,10 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -29,29 +29,53 @@ static void pci_init(struct device *dev)
u32 reg32;
printk_debug("Initializing ICH7 PCIe bridge.\n");
-#if 0
- // When the latency of the PCIe(!) bridge is set to 0x20
- // all devices on the secondary bus of the PCI(!) bridge
- // suddenly vanish. If you know why, please explain here.
+
+ /* Enable Bus Master */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 |= PCI_COMMAND_MASTER;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
- /* Set latency timer to 32. */
- pci_write_config16(dev, 0x1b, 0x20);
-#endif
+ /* Set Cache Line Size to 0x10 */
+ // This has no effect but the OS might expect it
+ pci_write_config8(dev, 0x0c, 0x10);
- /* disable parity error response */
reg16 = pci_read_config16(dev, 0x3e);
- reg16 &= ~(1 << 0);
+ reg16 &= ~(1 << 0); /* disable parity error response */
+ // reg16 &= ~(1 << 1); /* disable SERR */
+ reg16 |= (1 << 2); /* ISA enable */
pci_write_config16(dev, 0x3e, reg16);
- /* Clear errors in status registers */
- reg16 = pci_read_config16(dev, 0x06);
- reg16 |= 0xf900;
- pci_write_config16(dev, 0x06, reg16);
-
- reg16 = pci_read_config16(dev, 0x1e);
- reg16 |= 0xf900;
- pci_write_config16(dev, 0x1e, reg16);
+ /* Enable IO xAPIC on this PCIe port */
+ reg32 = pci_read_config32(dev, 0xd8);
+ reg32 |= (1 << 7);
+ pci_write_config32(dev, 0xd8, reg32);
+
+ /* Enable Backbone Clock Gating */
+ reg32 = pci_read_config32(dev, 0xe1);
+ reg32 |= (1 << 3) | (1 << 2) | (1 << 1) | (1 << 0);
+ pci_write_config32(dev, 0xe1, reg32);
+
+#if MMCONF_SUPPORT
+ /* Set VC0 transaction class */
+ reg32 = pci_mmio_read_config32(dev, 0x114);
+ reg32 &= 0xffffff00;
+ reg32 |= 1;
+ pci_mmio_write_config32(dev, 0x114, reg32);
+
+ /* Mask completion timeouts */
+ reg32 = pci_mmio_read_config32(dev, 0x148);
+ reg32 |= (1 << 14);
+ pci_mmio_write_config32(dev, 0x148, reg32);
+#else
+#error "MMIO needed for ICH7 PCIe"
+#endif
+ /* Enable common clock configuration */
+ // Are there cases when we don't want that?
+ reg16 = pci_read_config16(dev, 0x50);
+ reg16 |= (1 << 6);
+ pci_write_config16(dev, 0x50, reg16);
+#if EVEN_MORE_DEBUG
reg32 = pci_read_config32(dev, 0x20);
printk_spew(" MBL = 0x%08x\n", reg32);
reg32 = pci_read_config32(dev, 0x24);
@@ -60,19 +84,32 @@ static void pci_init(struct device *dev)
printk_spew(" PMBU32 = 0x%08x\n", reg32);
reg32 = pci_read_config32(dev, 0x2c);
printk_spew(" PMLU32 = 0x%08x\n", reg32);
+#endif
+
+ /* Clear errors in status registers */
+ reg16 = pci_read_config16(dev, 0x06);
+ //reg16 |= 0xf900;
+ pci_write_config16(dev, 0x06, reg16);
+
+ reg16 = pci_read_config16(dev, 0x1e);
+ //reg16 |= 0xf900;
+ pci_write_config16(dev, 0x1e, reg16);
}
-static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
+static void pcie_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
- u32 pci_id;
-
- printk_debug("Setting PCIe bridge subsystem ID.\n");
- pci_id = pci_read_config32(dev, 0);
- pci_write_config32(dev, 0x94, pci_id );
+ /* NOTE: This is not the default position! */
+ if (!vendor || !device) {
+ pci_write_config32(dev, 0x94,
+ pci_read_config32(dev, 0));
+ } else {
+ pci_write_config32(dev, 0x94,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
}
static struct pci_operations pci_ops = {
- .set_subsystem = set_subsystem,
+ .set_subsystem = pcie_set_subsystem,
};
static struct device_operations device_ops = {
diff --git a/src/southbridge/intel/i82801gx/i82801gx_reset.c b/src/southbridge/intel/i82801gx/i82801gx_reset.c
index 5ebb75607f..1facb08105 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_reset.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_reset.c
@@ -1,12 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/src/southbridge/intel/i82801gx/i82801gx_sata.c b/src/southbridge/intel/i82801gx/i82801gx_sata.c
index 7f17b73b0a..0f092e9204 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_sata.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_sata.c
@@ -3,10 +3,10 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -29,16 +29,29 @@ typedef struct southbridge_intel_i82801gx_config config_t;
static void sata_init(struct device *dev)
{
u32 reg32;
+ u16 reg16;
/* Get the chip configuration */
config_t *config = dev->chip_info;
printk_debug("i82801gx_sata: initializing...\n");
+
+ if (config == NULL)
+ printk_err("i82801gx_sata: error: device not in Config.lb!\n");
+
/* SATA configuration */
/* Enable BARs */
- pci_write_config16(dev, 0x04, 0x0007);
+ pci_write_config16(dev, PCI_COMMAND, 0x0007);
if (config->ide_legacy_combined) {
+ printk_debug("SATA controller in combined mode.\n");
+ /* No AHCI: clear AHCI base */
+ pci_write_config32(dev, 0x24, 0x00000000);
+ /* And without AHCI BAR no memory decoding */
+ reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 &= ~PCI_COMMAND_MEMORY;
+ pci_write_config16(dev, PCI_COMMAND, reg16);
+
pci_write_config8(dev, 0x09, 0x80);
/* Set timings */
@@ -49,6 +62,10 @@ static void sata_init(struct device *dev)
pci_write_config16(dev, 0x48, 0x0004);
pci_write_config16(dev, 0x4a, 0x0200);
+ /* Set IDE I/O Configuration */
+ reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+ pci_write_config32(dev, IDE_CONFIG, reg32);
+
/* Combine IDE - SATA configuration */
pci_write_config8(dev, 0x90, 0x02);
@@ -56,8 +73,9 @@ static void sata_init(struct device *dev)
pci_write_config8(dev, 0x92, 0x0f);
/* SATA Initialization register */
- pci_write_config32(dev, 0x94, 0x40000180);
+ pci_write_config32(dev, 0x94, 0x5a000180);
} else if(config->sata_ahci) {
+ printk_debug("SATA controller in AHCI mode.\n");
/* Allow both Legacy and Native mode */
pci_write_config8(dev, 0x09, 0x8f);
@@ -86,6 +104,18 @@ static void sata_init(struct device *dev)
/* SATA Initialization register */
pci_write_config32(dev, 0x94, 0x1a000180);
} else {
+ printk_debug("SATA controller in plain mode.\n");
+ /* Set Sata Controller Mode. No Mapping(?) */
+ pci_write_config8(dev, 0x90, 0x00);
+
+ /* No AHCI: clear AHCI base */
+ pci_write_config32(dev, 0x24, 0x00000000);
+
+ /* And without AHCI BAR no memory decoding */
+ reg16 = pci_read_config16(dev, PCI_COMMAND);
+ reg16 &= ~PCI_COMMAND_MEMORY;
+ pci_write_config16(dev, PCI_COMMAND, reg16);
+
/* Native mode capable on both primary and secondary (0xa)
* or'ed with enabled (0x50) = 0xf
*/
@@ -107,9 +137,6 @@ static void sata_init(struct device *dev)
reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
pci_write_config32(dev, IDE_CONFIG, reg32);
- /* Set Sata Controller Mode. */
- pci_write_config8(dev, 0x90, 0x02);
-
/* Port 0 & 1 enable XXX */
pci_write_config8(dev, 0x92, 0x15);
@@ -135,8 +162,28 @@ static void sata_init(struct device *dev)
pci_write_config8(dev, 0xa0, 0x00);
pci_write_config8(dev, PCI_INTERRUPT_LINE, 0);
+
+ /* Sata Initialization Register */
+ reg32 = pci_read_config32(dev, 0x94);
+ reg32 |= (1 << 30); // due to some bug
+ pci_write_config32(dev, 0x94, reg32);
+}
+
+static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
}
+static struct pci_operations sata_pci_ops = {
+ .set_subsystem = sata_set_subsystem,
+};
+
static struct device_operations sata_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
@@ -144,6 +191,7 @@ static struct device_operations sata_ops = {
.init = sata_init,
.scan_bus = 0,
.enable = i82801gx_enable,
+ .ops_pci = &sata_pci_ops,
};
/* Desktop Non-AHCI and Non-RAID Mode */
@@ -154,6 +202,15 @@ static const struct pci_driver i82801gx_sata_normal_driver __pci_driver = {
.device = 0x27c0,
};
+/* Mobile Non-AHCI and Non-RAID Mode */
+/* 82801GBM/GHM (ICH7-M/ICH7-M DH) */
+static const struct pci_driver i82801gx_sata_mobile_normal_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27c4,
+};
+
+
/* NOTE: Any of the below are not properly supported yet. */
/* Desktop AHCI Mode */
@@ -172,14 +229,6 @@ static const struct pci_driver i82801gx_sata_raid_driver __pci_driver = {
.device = 0x27c3,
};
-/* Mobile Non-AHCI and Non-RAID Mode */
-/* 82801GBM/GHM (ICH7-M/ICH7-M DH) */
-static const struct pci_driver i82801gx_sata_mobile_normal_driver __pci_driver = {
- .ops = &sata_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x27c4,
-};
-
/* Mobile AHCI Mode */
/* 82801GBM/GHM (ICH7-M/ICH7-M DH) */
static const struct pci_driver i82801gx_sata_mobile_ahci_driver __pci_driver = {
diff --git a/src/southbridge/intel/i82801gx/i82801gx_smbus.c b/src/southbridge/intel/i82801gx/i82801gx_smbus.c
index bc14cc39f2..e9f9c7d918 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_smbus.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_smbus.c
@@ -1,12 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,27 +18,47 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <stdint.h>
-#include <smbus.h>
-#include <pci.h>
-#include <pci_ids.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/path.h>
+#include <device/smbus.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
#include <arch/io.h>
#include "i82801gx.h"
-#include "i82801_smbus.h"
-
-static int smbus_read_byte(struct bus *bus, device_t dev, u8 address)
+#include "i82801gx_smbus.h"
+
+static int lsmbus_read_byte(device_t dev, u8 address)
{
u16 device;
struct resource *res;
+ struct bus *pbus;
device = dev->path.i2c.device;
- res = find_resource(bus->dev, 0x20);
+ pbus = get_pbus_smbus(dev);
+ res = find_resource(pbus->dev, 0x20);
return do_smbus_read_byte(res->base, device, address);
}
static struct smbus_bus_operations lops_smbus_bus = {
- .read_byte = smbus_read_byte,
+ .read_byte = lsmbus_read_byte,
+};
+
+static void smbus_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations smbus_pci_ops = {
+ .set_subsystem = smbus_set_subsystem,
};
static struct device_operations smbus_ops = {
@@ -49,6 +69,7 @@ static struct device_operations smbus_ops = {
.scan_bus = scan_static_bus,
.enable = i82801gx_enable,
.ops_smbus_bus = &lops_smbus_bus,
+ .ops_pci = &smbus_pci_ops,
};
/* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */
diff --git a/src/southbridge/intel/i82801gx/i82801gx_smbus.h b/src/southbridge/intel/i82801gx/i82801gx_smbus.h
index 13272cb552..ac327783ef 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_smbus.h
+++ b/src/southbridge/intel/i82801gx/i82801gx_smbus.h
@@ -2,11 +2,12 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
+ * Copyright (C) 2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -25,7 +26,7 @@ static void smbus_delay(void)
inb(0x80);
}
-static int smbus_wait_until_ready(void)
+static int smbus_wait_until_ready(u16 smbus_base)
{
unsigned loops = SMBUS_TIMEOUT;
unsigned char byte;
@@ -33,12 +34,12 @@ static int smbus_wait_until_ready(void)
smbus_delay();
if (--loops == 0)
break;
- byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ byte = inb(smbus_base + SMBHSTSTAT);
} while (byte & 1);
return loops ? 0 : -1;
}
-static int smbus_wait_until_done(void)
+static int smbus_wait_until_done(u16 smbus_base)
{
unsigned loops = SMBUS_TIMEOUT;
unsigned char byte;
@@ -46,142 +47,54 @@ static int smbus_wait_until_done(void)
smbus_delay();
if (--loops == 0)
break;
- byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ byte = inb(smbus_base + SMBHSTSTAT);
} while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0);
return loops ? 0 : -1;
}
-static int smbus_wait_until_blk_done(void)
-{
- unsigned loops = SMBUS_TIMEOUT;
- unsigned char byte;
- do {
- smbus_delay();
- if (--loops == 0)
- break;
- byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
- } while ((byte & (1 << 7)) == 0);
- return loops ? 0 : -1;
-}
-
-static int do_smbus_read_byte(unsigned device, unsigned address)
+static int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address)
{
unsigned char global_status_register;
unsigned char byte;
- if (smbus_wait_until_ready() < 0) {
+ if (smbus_wait_until_ready(smbus_base) < 0) {
return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
}
/* Setup transaction */
/* Disable interrupts */
- outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+ outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
/* Set the device I'm talking too */
- outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD);
+ outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
/* Set the command/address... */
- outb(address & 0xff, SMBUS_IO_BASE + SMBHSTCMD);
+ outb(address & 0xff, smbus_base + SMBHSTCMD);
/* Set up for a byte data read */
- outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x2 << 2),
- (SMBUS_IO_BASE + SMBHSTCTL));
+ outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
+ (smbus_base + SMBHSTCTL));
/* Clear any lingering errors, so the transaction will run */
- outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+ outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
/* Clear the data byte... */
- outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+ outb(0, smbus_base + SMBHSTDAT0);
/* Start the command */
- outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40),
- SMBUS_IO_BASE + SMBHSTCTL);
+ outb((inb(smbus_base + SMBHSTCTL) | 0x40),
+ smbus_base + SMBHSTCTL);
/* Poll for transaction completion */
- if (smbus_wait_until_done() < 0) {
+ if (smbus_wait_until_done(smbus_base) < 0) {
return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
}
- global_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ global_status_register = inb(smbus_base + SMBHSTSTAT);
/* Ignore the "In Use" status... */
global_status_register &= ~(3 << 5);
/* Read results of transaction */
- byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+ byte = inb(smbus_base + SMBHSTDAT0);
if (global_status_register != (1 << 1)) {
return SMBUS_ERROR;
}
return byte;
}
-/* This function is neither used nor tested by me (Corey Osgood), the author
-(Yinghai) probably tested/used it on i82801er */
-static int do_smbus_write_block(unsigned device, unsigned length, unsigned cmd,
- unsigned data1, unsigned data2)
-{
- unsigned char byte;
- unsigned char stat;
- int i;
-
-#if CONFIG_USE_PRINTK_IN_CAR
- printk_err("Untested smbus_write_block called\r\n");
-#else
- print_err("Untested smbus_write_block called\r\n");
-#endif
-
- /* Clear the PM timeout flags, SECOND_TO_STS */
- outw(inw(0x0400 + 0x66), 0x0400 + 0x66);
-
- if (smbus_wait_until_ready() < 0) {
- return -2;
- }
-
- /* Setup transaction */
- /* Obtain ownership */
- outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
- for (stat = 0; (stat & 0x40) == 0;) {
- stat = inb(SMBUS_IO_BASE + SMBHSTSTAT);
- }
- /* Clear the done bit */
- outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT);
- /* Disable interrupts */
- outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
-
- /* Set the device I'm talking too */
- outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD);
-
- /* Set the command address */
- outb(cmd & 0xff, SMBUS_IO_BASE + SMBHSTCMD);
-
- /* Set the block length */
- outb(length & 0xff, SMBUS_IO_BASE + SMBHSTDAT0);
-
- /* Try sending out the first byte of data here */
- byte = (data1 >> (0)) & 0x0ff;
- outb(byte, SMBUS_IO_BASE + SMBBLKDAT);
- /* Issue a block write command */
- outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x5 << 2) | 0x40,
- SMBUS_IO_BASE + SMBHSTCTL);
-
- for (i = 0; i < length; i++) {
-
- /* Poll for transaction completion */
- if (smbus_wait_until_blk_done() < 0) {
- return -3;
- }
-
- /* Load the next byte */
- if (i > 3)
- byte = (data2 >> (i % 4)) & 0x0ff;
- else
- byte = (data1 >> (i)) & 0x0ff;
- outb(byte, SMBUS_IO_BASE + SMBBLKDAT);
-
- /* Clear the done bit */
- outb(inb(SMBUS_IO_BASE + SMBHSTSTAT),
- SMBUS_IO_BASE + SMBHSTSTAT);
- }
-
-#if CONFIG_USE_PRINTK_IN_CAR
- printk_debug("SMBUS Block complete\r\n");
-#else
- print_debug("SMBUS Block complete\r\n");
-#endif
- return 0;
-}
diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb.c b/src/southbridge/intel/i82801gx/i82801gx_usb.c
index 22aad92a4e..a753202f72 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_usb.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_usb.c
@@ -1,12 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -42,6 +42,21 @@ static void usb_init(struct device *dev)
printk_debug("done.\n");
}
+static void usb_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations usb_pci_ops = {
+ .set_subsystem = usb_set_subsystem,
+};
+
static struct device_operations usb_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
@@ -49,6 +64,7 @@ static struct device_operations usb_ops = {
.init = usb_init,
.scan_bus = 0,
.enable = i82801gx_enable,
+ .ops_pci = &usb_pci_ops,
};
/* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */
diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c
new file mode 100644
index 0000000000..be524cabaa
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+// An arbitrary address for the BAR
+#define EHCI_BAR 0xFEF00000
+// These could be read from DEBUG_BASE (0:1d.7 R 0x5A 16bit)
+#define EHCI_BAR_INDEX 0x10
+#define EHCI_DEBUG_OFFSET 0xA0
+
+static void set_debug_port(unsigned port)
+{
+ // Nothing for now?
+}
+
+static void i82801gx_enable_usbdebug_direct(unsigned port)
+{
+ pci_write_config32(PCI_DEV(0, 0x1d, 7), EHCI_BAR_INDEX, EHCI_BAR);
+ pci_write_config8(PCI_DEV(0, 0x1d, 7), 0x04, 0x2); // Memory Space Enable
+}
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c
index 5ac7a1a97c..39a5799ed9 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c
@@ -1,12 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -23,14 +23,23 @@
#include <device/pci.h>
#include <device/pci_ids.h>
#include "i82801gx.h"
+#if CONFIG_USBDEBUG_DIRECT
+#include <usbdebug_direct.h>
+#endif
+#include <arch/io.h>
static void usb_ehci_init(struct device *dev)
{
+ struct resource *res;
+ u8 *base;
u32 reg32;
+ u8 reg8;
printk_debug("EHCI: Setting up controller.. ");
reg32 = pci_read_config32(dev, PCI_COMMAND);
- pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
+ reg32 |= PCI_COMMAND_MASTER;
+ reg32 |= PCI_COMMAND_SERR;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
reg32 = pci_read_config32(dev, 0xdc);
reg32 |= (1 << 31) | (1 << 27);
@@ -41,11 +50,21 @@ static void usb_ehci_init(struct device *dev)
reg32 |= (2 << 2) | (1 << 29) | (1 << 17);
pci_write_config32(dev, 0xfc, reg32);
+ /* Clear any pending port changes */
+ res = find_resource(dev, 0x10);
+ base =(u8 *)res->base;
+ reg32 = readl(base + 0x24) | (1 << 2);
+ writel(base + 0x24, reg32);
+
+ /* workaround */
+ reg8 = pci_read_config8(dev, 0x84);
+ reg8 |= (1 << 4);
+ pci_write_config8(dev, 0x84, reg8);
+
printk_debug("done.\n");
}
-static void usb_ehci_set_subsystem(device_t dev, unsigned vendor,
- unsigned device)
+static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
u8 access_cntl;
@@ -54,14 +73,42 @@ static void usb_ehci_set_subsystem(device_t dev, unsigned vendor,
/* Enable writes to protected registers. */
pci_write_config8(dev, 0x80, access_cntl | 1);
- /* Write the subsystem vendor and device ID. */
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
/* Restore protection. */
pci_write_config8(dev, 0x80, access_cntl);
}
+static void usb_ehci_set_resources(struct device *dev)
+{
+#if CONFIG_USBDEBUG_DIRECT
+ struct resource *res;
+ u32 base;
+ u32 usb_debug;
+
+ usb_debug = get_ehci_debug();
+ set_ehci_debug(0);
+#endif
+ pci_dev_set_resources(dev);
+
+#if CONFIG_USBDEBUG_DIRECT
+ res = find_resource(dev, 0x10);
+ set_ehci_debug(usb_debug);
+ if (!res) return;
+ base = res->base;
+ set_ehci_base(base);
+ report_resource_stored(dev, res, "");
+#endif
+}
+
+
+
static struct pci_operations lops_pci = {
.set_subsystem = &usb_ehci_set_subsystem,
};
diff --git a/src/southbridge/intel/i82801gx/i82801gx_watchdog.c b/src/southbridge/intel/i82801gx/i82801gx_watchdog.c
index 474a2d7cb3..9304ffc705 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_watchdog.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_watchdog.c
@@ -1,12 +1,12 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of