diff options
| -rw-r--r-- | Documentation/mainboard/lenovo/ivb_internal_flashing.md | 341 |
1 files changed, 165 insertions, 176 deletions
diff --git a/Documentation/mainboard/lenovo/ivb_internal_flashing.md b/Documentation/mainboard/lenovo/ivb_internal_flashing.md index d0ac3cdd79..355cf98448 100644 --- a/Documentation/mainboard/lenovo/ivb_internal_flashing.md +++ b/Documentation/mainboard/lenovo/ivb_internal_flashing.md @@ -63,55 +63,51 @@ directly. Therefore you need to modify the bootable CD image you just downloaded. Extract an El Torito image: -``` -geteltorito -o ./bios.img g1uj41us.iso -``` + + geteltorito -o ./bios.img g1uj41us.iso + Mount the partition in that image: -``` -sudo mount -t vfat ./bios.img /mnt -o loop,offset=16384 -``` + + sudo mount -t vfat ./bios.img /mnt -o loop,offset=16384 + List files, find the `AUTOEXEC.BAT` file and the `FLASH` directory: -``` -ls /mnt -ls /mnt/FLASH -``` + + ls /mnt + ls /mnt/FLASH Inside the `FLASH` directory, there should be a directory called `G1ET93WW` or similar (exact name depends on your ThinkPad model and BIOS version). See what's inside: -``` -ls /mnt/FLASH/G1ET93WW -``` + + ls /mnt/FLASH/G1ET93WW + There must be a file with `.FL1` extension called `$01D2000.FL1` or something similar. Now open the `AUTOEXEC.BAT` file: -``` -sudo vim /mnt/AUTOEXEC.BAT -``` + + sudo vim /mnt/AUTOEXEC.BAT + You will see a list of commands: -``` -@ECHO OFF -PROMPT $p$g -cd c:\flash -command.com -``` + + @ECHO OFF + PROMPT $p$g + cd c:\flash + command.com + Replace the last line (`command.com`) with this (change path to the `.FL1` file according to yours): -``` -dosflash.exe /sd /file G1ET93WW\$01D2000.FL1 -``` + + dosflash.exe /sd /file G1ET93WW\$01D2000.FL1 Save the file, then unmount the partition: -``` -sudo unmount /mnt -``` + + sudo unmount /mnt Write this image to a USB drive (replace `/dev/sdX` with your USB drive device name): -``` -sudo dd if=./bios.img of=/dev/sdX bs=1M -``` + + sudo dd if=./bios.img of=/dev/sdX bs=1M Now reboot and press F1 to enter BIOS settings. Open the **Startup** tab and set the startup mode to **Legacy** (or **Both**/**Legacy First**): @@ -167,69 +163,66 @@ To be able to flash, we need SMM_BWP=0, BIOSWE=1, BLE=0, FLOCKDN=0 or SPI protected ranges (PRx) to have a WP bit set to 0. Let's see what we have. Examine HSFS register: -``` -sudo chipsec_main -m chipsec.modules.common.spi_lock -``` + + sudo chipsec_main -m chipsec.modules.common.spi_lock + You should see that FLOCKDN=1: -``` -[x][ ======================================================================= -[x][ Module: SPI Flash Controller Configuration Locks -[x][ ======================================================================= -[*] HSFS = 0xE009 << Hardware Sequencing Flash Status Register (SPIBAR + 0x4) - [00] FDONE = 1 << Flash Cycle Done - [01] FCERR = 0 << Flash Cycle Error - [02] AEL = 0 << Access Error Log - [03] BERASE = 1 << Block/Sector Erase Size - [05] SCIP = 0 << SPI cycle in progress - [13] FDOPSS = 1 << Flash Descriptor Override Pin-Strap Status - [14] FDV = 1 << Flash Descriptor Valid - [15] FLOCKDN = 1 << Flash Configuration Lock-Down -``` + + [x][ ======================================================================= + [x][ Module: SPI Flash Controller Configuration Locks + [x][ ======================================================================= + [*] HSFS = 0xE009 << Hardware Sequencing Flash Status Register (SPIBAR + 0x4) + [00] FDONE = 1 << Flash Cycle Done + [01] FCERR = 0 << Flash Cycle Error + [02] AEL = 0 << Access Error Log + [03] BERASE = 1 << Block/Sector Erase Size + [05] SCIP = 0 << SPI cycle in progress + [13] FDOPSS = 1 << Flash Descriptor Override Pin-Strap Status + [14] FDV = 1 << Flash Descriptor Valid + [15] FLOCKDN = 1 << Flash Configuration Lock-Down Then check BIOS_CNTL and PR0-PR4: -``` -sudo chipsec_main -m common.bios_wp -``` + + sudo chipsec_main -m common.bios_wp + Good news: on old BIOS versions, SMM_BWP=0 and BLE=0. Bad news: there are 4 write protected SPI ranges: -``` -[x][ ======================================================================= -[x][ Module: BIOS Region Write Protection -[x][ ======================================================================= -[*] BC = 0x 8 << BIOS Control (b:d.f 00:31.0 + 0xDC) - [00] BIOSWE = 0 << BIOS Write Enable - [01] BLE = 0 << BIOS Lock Enable - [02] SRC = 2 << SPI Read Configuration - [04] TSS = 0 << Top Swap Status - [05] SMM_BWP = 0 << SMM BIOS Write Protection -[-] BIOS region write protection is disabled! - -[*] BIOS Region: Base = 0x00500000, Limit = 0x00BFFFFF -SPI Protected Ranges ------------------------------------------------------------- -PRx (offset) | Value | Base | Limit | WP? | RP? ------------------------------------------------------------- -PR0 (74) | 00000000 | 00000000 | 00000000 | 0 | 0 -PR1 (78) | 8BFF0B40 | 00B40000 | 00BFFFFF | 1 | 0 -PR2 (7C) | 8B100B10 | 00B10000 | 00B10FFF | 1 | 0 -PR3 (80) | 8ADE0AD0 | 00AD0000 | 00ADEFFF | 1 | 0 -PR4 (84) | 8AAF0800 | 00800000 | 00AAFFFF | 1 | 0 -``` + [x][ ======================================================================= + [x][ Module: BIOS Region Write Protection + [x][ ======================================================================= + [*] BC = 0x 8 << BIOS Control (b:d.f 00:31.0 + 0xDC) + [00] BIOSWE = 0 << BIOS Write Enable + [01] BLE = 0 << BIOS Lock Enable + [02] SRC = 2 << SPI Read Configuration + [04] TSS = 0 << Top Swap Status + [05] SMM_BWP = 0 << SMM BIOS Write Protection + [-] BIOS region write protection is disabled! + + [*] BIOS Region: Base = 0x00500000, Limit = 0x00BFFFFF + SPI Protected Ranges + ------------------------------------------------------------ + PRx (offset) | Value | Base | Limit | WP? | RP? + ------------------------------------------------------------ + PR0 (74) | 00000000 | 00000000 | 00000000 | 0 | 0 + PR1 (78) | 8BFF0B40 | 00B40000 | 00BFFFFF | 1 | 0 + PR2 (7C) | 8B100B10 | 00B10000 | 00B10FFF | 1 | 0 + PR3 (80) | 8ADE0AD0 | 00AD0000 | 00ADEFFF | 1 | 0 + PR4 (84) | 8AAF0800 | 00800000 | 00AAFFFF | 1 | 0 Other way to examine SPI configuration registers is to just dump SPIBAR: -``` -sudo chipsec_util mmio dump SPIBAR -``` + + sudo chipsec_util mmio dump SPIBAR + You will see SPIBAR address (0xFED1F800) and registers (for example, 00000004 is HSFS): -``` -[mmio] MMIO register range [0x00000000FED1F800:0x00000000FED1F800+00000200]: -+00000000: 0BFF0500 -+00000004: 0004E009 -... -``` + + [mmio] MMIO register range [0x00000000FED1F800:0x00000000FED1F800+00000200]: + +00000000: 0BFF0500 + +00000004: 0004E009 + ... + As you can see, the only thing we need is to unset WP bit on PR0-PR4. But that cannot be done once FLOCKDN is set to 1. @@ -239,23 +232,23 @@ FLOCKDN may only be cleared by a hardware reset, which includes S3 state. On S3 resume boot path, the chipset configuration has to be restored and it's done by executing so-called S3 Boot Scripts. You can dump these scripts by executing: -``` -sudo chipsec_util uefi s3bootscript -``` + + sudo chipsec_util uefi s3bootscript + There are many entries. Along them, you can find instructions to write to HSFS (remember, we know that SPIBAR is 0xFED1F800): -``` -Entry at offset 0x2B8F (len = 0x17, header len = 0x0): -Data: -02 00 17 02 00 00 00 01 00 00 00 04 f8 d1 fe 00 | -00 00 00 09 e0 04 00 | -Decoded: - Opcode : S3_BOOTSCRIPT_MEM_WRITE (0x0002) - Width : 0x02 (4 bytes) - Address: 0xFED1F804 - Count : 0x1 - Values : 0x0004E009 -``` + + Entry at offset 0x2B8F (len = 0x17, header len = 0x0): + Data: + 02 00 17 02 00 00 00 01 00 00 00 04 f8 d1 fe 00 | + 00 00 00 09 e0 04 00 | + Decoded: + Opcode : S3_BOOTSCRIPT_MEM_WRITE (0x0002) + Width : 0x02 (4 bytes) + Address: 0xFED1F804 + Count : 0x1 + Values : 0x0004E009 + These scripts are stored in memory. The vulnerability is that we can overwrite this memory, change these instructions and they will be executed on S3 resume. Once we patch that instruction to not set FLOCKDN @@ -268,14 +261,13 @@ in case something goes wrong, you'll be able to flash it back externally. The `me` region is locked, so an attempt to create a full dump will fail. But you can back up the `bios`: -``` -sudo flashrom -p internal -r bios_backup.rom --ifd -i bios -``` + + sudo flashrom -p internal -r bios_backup.rom --ifd -i bios If you will ever need to flash it back, use `--ifd -i bios` as well: -``` -sudo flashrom -p <YOUR_PROGRAMMER> -w bios_backup.rom --ifd -i bios -``` + + sudo flashrom -p <YOUR_PROGRAMMER> -w bios_backup.rom --ifd -i bios + **Caution:** if you will omit `--ifd -i bios` for flashing, you will brick your machine, because your backup has `FF`s in place of `fd` and `me` regions. Flash only `bios` region! @@ -284,83 +276,80 @@ brick your machine, because your backup has `FF`s in place of `fd` and The original boot script writes 0xE009 to HSFS. FLOCKDN is 15th bit, so let's write 0x6009 instead: -``` -sudo chipsec_main -m tools.uefi.s3script_modify -a replace_op,mmio_wr,0xFED1F804,0x6009,0x2 -``` + + sudo chipsec_main -m tools.uefi.s3script_modify -a replace_op,mmio_wr,0xFED1F804,0x6009,0x2 + You will get a lot of output and in the end you should see something like this: -``` -[*] Modifying S3 boot script entry at address 0x00000000DAF49B8F.. -[mem] 0x00000000DAF49B8F -[*] Original entry: - 2 0 17 2 0 0 0 1 0 0 0 4 f8 d1 fe 0 | - 0 0 0 9 e0 4 0 | -[mem] buffer len = 0x17 to PA = 0x00000000DAF49B8F - 2 0 17 2 0 0 0 1 0 0 0 4 f8 d1 fe 0 | - 0 0 0 9 60 0 0 | ` -[mem] 0x00000000DAF49B8F -[*] Modified entry: - 2 0 17 2 0 0 0 1 0 0 0 4 f8 d1 fe 0 | - 0 0 0 9 60 0 0 | ` -[*] After sleep/resume, check the value of register 0xFED1F804 is 0x6009 -[+] PASSED: The script has been modified. Go to sleep.. -``` + + [*] Modifying S3 boot script entry at address 0x00000000DAF49B8F.. + [mem] 0x00000000DAF49B8F + [*] Original entry: + 2 0 17 2 0 0 0 1 0 0 0 4 f8 d1 fe 0 | + 0 0 0 9 e0 4 0 | + [mem] buffer len = 0x17 to PA = 0x00000000DAF49B8F + 2 0 17 2 0 0 0 1 0 0 0 4 f8 d1 fe 0 | + 0 0 0 9 60 0 0 | ` + [mem] 0x00000000DAF49B8F + [*] Modified entry: + 2 0 17 2 0 0 0 1 0 0 0 4 f8 d1 fe 0 | + 0 0 0 9 60 0 0 | ` + [*] After sleep/resume, check the value of register 0xFED1F804 is 0x6009 + [+] PASSED: The script has been modified. Go to sleep.. + Now go to S3, then resume and check FLOCKDN. It should be 0: -``` -sudo chipsec_main -m chipsec.modules.common.spi_lock -``` -``` -... -[x][ ======================================================================= -[x][ Module: SPI Flash Controller Configuration Locks -[x][ ======================================================================= -[*] HSFS = 0x6008 << Hardware Sequencing Flash Status Register (SPIBAR + 0x4) - [00] FDONE = 0 << Flash Cycle Done - [01] FCERR = 0 << Flash Cycle Error - [02] AEL = 0 << Access Error Log - [03] BERASE = 1 << Block/Sector Erase Size - [05] SCIP = 0 << SPI cycle in progress - [13] FDOPSS = 1 << Flash Descriptor Override Pin-Strap Status - [14] FDV = 1 << Flash Descriptor Valid - [15] FLOCKDN = 0 << Flash Configuration Lock-Down -[-] SPI Flash Controller configuration is not locked -[-] FAILED: SPI Flash Controller not locked correctly. -... -``` + + sudo chipsec_main -m chipsec.modules.common.spi_lock + + ... + [x][ ======================================================================= + [x][ Module: SPI Flash Controller Configuration Locks + [x][ ======================================================================= + [*] HSFS = 0x6008 << Hardware Sequencing Flash Status Register (SPIBAR + 0x4) + [00] FDONE = 0 << Flash Cycle Done + [01] FCERR = 0 << Flash Cycle Error + [02] AEL = 0 << Access Error Log + [03] BERASE = 1 << Block/Sector Erase Size + [05] SCIP = 0 << SPI cycle in progress + [13] FDOPSS = 1 << Flash Descriptor Override Pin-Strap Status + [14] FDV = 1 << Flash Descriptor Valid + [15] FLOCKDN = 0 << Flash Configuration Lock-Down + [-] SPI Flash Controller configuration is not locked + [-] FAILED: SPI Flash Controller not locked correctly. + ... + Remove WP from protected ranges: -``` -sudo chipsec_util mmio write SPIBAR 0x74 0x4 0xAAF0800 -sudo chipsec_util mmio write SPIBAR 0x78 0x4 0xADE0AD0 -sudo chipsec_util mmio write SPIBAR 0x7C 0x4 0xB100B10 -sudo chipsec_util mmio write SPIBAR 0x80 0x4 0xBFF0B40 -``` + + sudo chipsec_util mmio write SPIBAR 0x74 0x4 0xAAF0800 + sudo chipsec_util mmio write SPIBAR 0x78 0x4 0xADE0AD0 + sudo chipsec_util mmio write SPIBAR 0x7C 0x4 0xB100B10 + sudo chipsec_util mmio write SPIBAR 0x80 0x4 0xBFF0B40 + Verify that it worked: -``` -sudo chipsec_main -m common.bios_wp -``` -``` -[x][ ======================================================================= -[x][ Module: BIOS Region Write Protection -[x][ ======================================================================= -[*] BC = 0x 9 << BIOS Control (b:d.f 00:31.0 + 0xDC) - [00] BIOSWE = 1 << BIOS Write Enable - [01] BLE = 0 << BIOS Lock Enable - [02] SRC = 2 << SPI Read Configuration - [04] TSS = 0 << Top Swap Status - [05] SMM_BWP = 0 << SMM BIOS Write Protection -[-] BIOS region write protection is disabled! - -[*] BIOS Region: Base = 0x00500000, Limit = 0x00BFFFFF -SPI Protected Ranges ------------------------------------------------------------- -PRx (offset) | Value | Base | Limit | WP? | RP? ------------------------------------------------------------- -PR0 (74) | 0AAF0800 | 00800000 | 00AAF000 | 0 | 0 -PR1 (78) | 0ADE0AD0 | 00AD0000 | 00ADE000 | 0 | 0 -PR2 (7C) | 0B100B10 | 00B10000 | 00B10000 | 0 | 0 -PR3 (80) | 0BFF0B40 | 00B40000 | 00BFF000 | 0 | 0 -PR4 (84) | 00000000 | 00000000 | 00000000 | 0 | 0 -``` + + sudo chipsec_main -m common.bios_wp + + [x][ ======================================================================= + [x][ Module: BIOS Region Write Protection + [x][ ======================================================================= + [*] BC = 0x 9 << BIOS Control (b:d.f 00:31.0 + 0xDC) + [00] BIOSWE = 1 << BIOS Write Enable + [01] BLE = 0 << BIOS Lock Enable + [02] SRC = 2 << SPI Read Configuration + [04] TSS = 0 << Top Swap Status + [05] SMM_BWP = 0 << SMM BIOS Write Protection + [-] BIOS region write protection is disabled! + + [*] BIOS Region: Base = 0x00500000, Limit = 0x00BFFFFF + SPI Protected Ranges + ------------------------------------------------------------ + PRx (offset) | Value | Base | Limit | WP? | RP? + ------------------------------------------------------------ + PR0 (74) | 0AAF0800 | 00800000 | 00AAF000 | 0 | 0 + PR1 (78) | 0ADE0AD0 | 00AD0000 | 00ADE000 | 0 | 0 + PR2 (7C) | 0B100B10 | 00B10000 | 00B10000 | 0 | 0 + PR3 (80) | 0BFF0B40 | 00B40000 | 00BFF000 | 0 | 0 + PR4 (84) | 00000000 | 00000000 | 00000000 | 0 | 0 Bingo! |