summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/apple/macbook21/romstage.c57
-rw-r--r--src/mainboard/asus/p5gc-mx/romstage.c59
-rw-r--r--src/mainboard/getac/p470/romstage.c61
-rw-r--r--src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c64
-rw-r--r--src/mainboard/ibase/mb899/romstage.c55
-rw-r--r--src/mainboard/intel/d945gclf/romstage.c52
-rw-r--r--src/mainboard/kontron/986lcd-m/romstage.c59
-rw-r--r--src/mainboard/lenovo/t60/romstage.c92
-rw-r--r--src/mainboard/lenovo/x60/romstage.c100
-rw-r--r--src/mainboard/roda/rk886ex/romstage.c56
-rw-r--r--src/northbridge/intel/i945/Makefile.inc1
-rw-r--r--src/northbridge/intel/i945/i945.h12
-rw-r--r--src/northbridge/intel/i945/romstage.c95
13 files changed, 187 insertions, 576 deletions
diff --git a/src/mainboard/apple/macbook21/romstage.c b/src/mainboard/apple/macbook21/romstage.c
index 41c0e9f384..d4654de118 100644
--- a/src/mainboard/apple/macbook21/romstage.c
+++ b/src/mainboard/apple/macbook21/romstage.c
@@ -15,19 +15,10 @@
* GNU General Public License for more details.
*/
-#include <stdint.h>
-#include <cf9_reset.h>
-#include <device/pci_ops.h>
-#include <device/pci_def.h>
-#include <arch/romstage.h>
-#include <cpu/x86/lapic.h>
-#include <console/console.h>
#include <northbridge/intel/i945/i945.h>
-#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
-static void rcba_config(void)
+void mainboard_late_rcba_config(void)
{
/* V0CTL Virtual Channel 0 Resource Control */
RCBA32(0x0014) = 0x80000001;
@@ -57,49 +48,3 @@ static void rcba_config(void)
RCBA32(0x1e9c) = 0x000200f0;
RCBA32(0x1e98) = 0x000c0801;
}
-
-void mainboard_romstage_entry(void)
-{
- int s3resume = 0;
- const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x51, 0x52, 0x53 };
-
- enable_lapic();
-
- i82801gx_lpc_setup();
-
- /* Set up the console */
- console_init();
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- printk(BIOS_DEBUG,
- "Soft reset detected, rebooting properly.\n");
- system_reset();
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- i82801gx_early_init();
- i945_early_initialization();
-
- s3resume = southbridge_detect_s3_resume();
-
- /* Enable SPD ROMs and DDR-II DRAM */
- enable_smbus();
-
- if (CONFIG(DEBUG_RAM_SETUP))
- dump_spd_registers();
-
- sdram_initialize(s3resume ? 2 : 0, spd_addrmap);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
-
- /* Chipset Errata! */
- fixup_i945_errata();
-
- /* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization(s3resume);
-}
diff --git a/src/mainboard/asus/p5gc-mx/romstage.c b/src/mainboard/asus/p5gc-mx/romstage.c
index 0cc38a03e8..eef603bbf5 100644
--- a/src/mainboard/asus/p5gc-mx/romstage.c
+++ b/src/mainboard/asus/p5gc-mx/romstage.c
@@ -19,16 +19,11 @@
#include <cf9_reset.h>
#include <device/pnp_ops.h>
#include <device/pci_ops.h>
-#include <device/pci_def.h>
-#include <cpu/x86/lapic.h>
#include <superio/winbond/common/winbond.h>
#include <superio/winbond/w83627dhg/w83627dhg.h>
#include <console/console.h>
-#include <arch/romstage.h>
#include <northbridge/intel/i945/i945.h>
-#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
#include <cpu/x86/msr.h>
#include <cpu/intel/speedstep.h>
#include <arch/cpu.h>
@@ -96,65 +91,27 @@ static u8 msr_get_fsb(void)
return fsbcfg;
}
-static void rcba_config(void)
+void mainboard_late_rcba_config(void)
{
/* Enable PCIe Root Port Clock Gate */
RCBA32(CG) = 0x00000001;
}
-void mainboard_romstage_entry(void)
-{
- int s3resume = 0, boot_mode = 0;
+void mainboard_pre_raminit_config(int s3_resume)
+{
u8 c_bsel = msr_get_fsb();
-
- enable_lapic();
-
- i82801gx_lpc_setup();
-
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
- /* Set up the console */
- console_init();
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- printk(BIOS_DEBUG, "soft reset detected.\n");
- boot_mode = 1;
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- i82801gx_early_init();
- i945_early_initialization();
-
- s3resume = southbridge_detect_s3_resume();
-
/*
* Result is that FSB is incorrect on s3 resume (fixed at 800MHz).
* Some CPU accept this others don't.
*/
- if (!s3resume && setup_sio_gpio(c_bsel)) {
+ if (!s3_resume && setup_sio_gpio(c_bsel)) {
printk(BIOS_DEBUG,
"Needs reset to configure CPU BSEL straps\n");
full_reset();
}
+}
- /* Enable SPD ROMs and DDR-II DRAM */
- enable_smbus();
-
- if (CONFIG(DEBUG_RAM_SETUP))
- dump_spd_registers();
-
- sdram_initialize(s3resume ? 2 : boot_mode, NULL);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
-
- /* Chipset Errata! */
- fixup_i945_errata();
-
- /* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization(s3resume);
+void mainboard_superio_config(void)
+{
+ winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
diff --git a/src/mainboard/getac/p470/romstage.c b/src/mainboard/getac/p470/romstage.c
index 8c41190b02..2da9d06ff9 100644
--- a/src/mainboard/getac/p470/romstage.c
+++ b/src/mainboard/getac/p470/romstage.c
@@ -16,22 +16,16 @@
#include <stdint.h>
#include <arch/io.h>
-#include <cf9_reset.h>
#include <delay.h>
#include <device/pnp_ops.h>
#include <device/pci_ops.h>
-#include <device/pci_def.h>
-#include <cpu/x86/lapic.h>
#include <pc80/mc146818rtc.h>
#include <console/console.h>
-#include <arch/romstage.h>
#include <northbridge/intel/i945/i945.h>
-#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
#include "option_table.h"
-static void setup_special_ich7_gpios(void)
+void mainboard_pre_raminit_config(int s3_resume)
{
u32 gpios;
@@ -52,7 +46,7 @@ static void setup_special_ich7_gpios(void)
}
/* Override the default lpc decode ranges */
-static void mb_lpc_decode(void)
+void mainboard_lpc_decode(void)
{
int lpt_en = 0;
if (read_option(lpt, 0) != 0)
@@ -81,7 +75,7 @@ static void pnp_exit_ext_func_mode(pnp_devfn_t dev)
outb(0xaa, port);
}
-static void early_superio_config(void)
+void mainboard_superio_config(void)
{
pnp_devfn_t dev;
@@ -126,7 +120,7 @@ static void early_superio_config(void)
pnp_exit_ext_func_mode(dev);
}
-static void rcba_config(void)
+void mainboard_late_rcba_config(void)
{
/* Set up virtual channel 0 */
//RCBA32(0x0014) = 0x80000001;
@@ -158,50 +152,3 @@ static void rcba_config(void)
RCBA32(0x1e9c) = 0x000200f0;
RCBA32(0x1e98) = 0x000c0801;
}
-
-void mainboard_romstage_entry(void)
-{
- int s3resume = 0;
-
- enable_lapic();
-
- i82801gx_lpc_setup();
- mb_lpc_decode();
- early_superio_config();
-
- /* Set up the console */
- console_init();
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- system_reset();
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- i82801gx_early_init();
- i945_early_initialization();
-
- setup_special_ich7_gpios();
-
- s3resume = southbridge_detect_s3_resume();
-
- /* Enable SPD ROMs and DDR-II DRAM */
- enable_smbus();
-
- if (CONFIG(DEBUG_RAM_SETUP))
- dump_spd_registers();
-
- sdram_initialize(s3resume ? 2 : 0, NULL);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
-
- /* Chipset Errata! */
- fixup_i945_errata();
-
- /* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization(s3resume);
-}
diff --git a/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c b/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c
index cd1345148d..467a66f959 100644
--- a/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c
+++ b/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c
@@ -14,25 +14,17 @@
* GNU General Public License for more details.
*/
-#include <stdint.h>
-#include <device/pci_ops.h>
-#include <device/pci_def.h>
-#include <cpu/x86/lapic.h>
#include <superio/ite/it8718f/it8718f.h>
#include <superio/ite/common/ite.h>
-#include <console/console.h>
-#include <arch/romstage.h>
#include <northbridge/intel/i945/i945.h>
-#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1)
#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO)
#define EC_DEV PNP_DEV(0x2e, IT8718F_EC)
#define SUPERIO_DEV PNP_DEV(0x2e, 0)
-static void setup_sio(void)
+void mainboard_superio_config(void)
{
/* Set default GPIOs on superio */
ite_reg_write(GPIO_DEV, 0x25, 0x40);
@@ -54,59 +46,15 @@ static void setup_sio(void)
ite_reg_write(EC_DEV, 0x70, 0x00); // Don't use IRQ9
ite_reg_write(EC_DEV, 0x30, 0xff); // Enable
-}
-
-static void rcba_config(void)
-{
- /* Enable PCIe Root Port Clock Gate */
- RCBA32(CG) = 0x00000001;
-}
-void mainboard_romstage_entry(void)
-{
- int s3resume = 0, boot_mode = 0;
- enable_lapic();
-
- i82801gx_lpc_setup();
- /* Enable SuperIO PM */
- setup_sio();
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
/* Disable SIO reboot */
ite_reg_write(GPIO_DEV, 0xEF, 0x7E);
+}
- /* Set up the console */
- console_init();
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- printk(BIOS_DEBUG, "soft reset detected.\n");
- boot_mode = 1;
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- i82801gx_early_init();
- i945_early_initialization();
-
- s3resume = southbridge_detect_s3_resume();
-
- /* Enable SPD ROMs and DDR-II DRAM */
- enable_smbus();
-
- if (CONFIG(DEBUG_RAM_SETUP))
- dump_spd_registers();
-
- sdram_initialize(s3resume ? 2 : boot_mode, NULL);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
-
- /* Chipset Errata! */
- fixup_i945_errata();
-
- /* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization(s3resume);
+void mainboard_late_rcba_config(void)
+{
+ /* Enable PCIe Root Port Clock Gate */
+ RCBA32(CG) = 0x00000001;
}
diff --git a/src/mainboard/ibase/mb899/romstage.c b/src/mainboard/ibase/mb899/romstage.c
index 47e28a8dc1..2bc3cde103 100644
--- a/src/mainboard/ibase/mb899/romstage.c
+++ b/src/mainboard/ibase/mb899/romstage.c
@@ -14,20 +14,13 @@
*/
#include <stdint.h>
-#include <cf9_reset.h>
#include <device/pnp_ops.h>
-#include <device/pci_ops.h>
-#include <console/console.h>
-#include <arch/romstage.h>
#include <cpu/x86/lapic.h>
-#include <device/pci_def.h>
#include <device/pnp_def.h>
#include <northbridge/intel/i945/i945.h>
-#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
#include <superio/winbond/common/winbond.h>
#include <superio/winbond/w83627ehg/w83627ehg.h>
-#include <southbridge/intel/common/pmclib.h>
#define SERIAL_DEV PNP_DEV(0x4e, W83627EHG_SP1)
#define SUPERIO_DEV PNP_DEV(0x4e, 0)
@@ -36,7 +29,7 @@
* Also set up the GPIOs from the beginning. This is the "no schematic
* but safe anyways" method.
*/
-static void early_superio_config_w83627ehg(void)
+void mainboard_superio_config(void)
{
pnp_devfn_t dev;
@@ -103,7 +96,7 @@ static void early_superio_config_w83627ehg(void)
pnp_exit_conf_state(dev);
}
-static void rcba_config(void)
+void mainboard_late_rcba_config(void)
{
/* Set up virtual channel 0 */
//RCBA32(0x0014) = 0x80000001;
@@ -123,47 +116,3 @@ static void rcba_config(void)
/* Enable PCIe Root Port Clock Gate */
// RCBA32(0x341c) = 0x00000001;
}
-
-void mainboard_romstage_entry(void)
-{
- int s3resume = 0;
-
- enable_lapic();
-
- i82801gx_lpc_setup();
- early_superio_config_w83627ehg();
-
- /* Set up the console */
- console_init();
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- system_reset();
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- i82801gx_early_init();
- i945_early_initialization();
-
- s3resume = southbridge_detect_s3_resume();
-
- /* Enable SPD ROMs and DDR-II DRAM */
- enable_smbus();
-
- if (CONFIG(DEBUG_RAM_SETUP))
- dump_spd_registers();
-
- sdram_initialize(s3resume ? 2 : 0, NULL);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
-
- /* Chipset Errata! */
- fixup_i945_errata();
-
- /* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization(s3resume);
-}
diff --git a/src/mainboard/intel/d945gclf/romstage.c b/src/mainboard/intel/d945gclf/romstage.c
index ada6e61c00..7a8f5d1656 100644
--- a/src/mainboard/intel/d945gclf/romstage.c
+++ b/src/mainboard/intel/d945gclf/romstage.c
@@ -13,22 +13,14 @@
* GNU General Public License for more details.
*/
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ops.h>
-#include <cpu/x86/lapic.h>
#include <superio/smsc/lpc47m15x/lpc47m15x.h>
-#include <console/console.h>
-#include <arch/romstage.h>
#include <northbridge/intel/i945/i945.h>
-#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
#define SERIAL_DEV PNP_DEV(0x2e, LPC47M15X_SP1)
#define PME_DEV PNP_DEV(0x2e, LPC47M15X_PME)
-static void rcba_config(void)
+void mainboard_late_rcba_config(void)
{
/* Set up virtual channel 0 */
//RCBA32(0x0014) = 0x80000001;
@@ -47,49 +39,9 @@ static void rcba_config(void)
// RCBA32(0x341c) = 0x00000001;
}
-void mainboard_romstage_entry(void)
+void mainboard_superio_config(void)
{
- int s3resume = 0, boot_mode = 0;
-
- enable_lapic();
-
- i82801gx_lpc_setup();
/* Enable SuperIO PM */
lpc47m15x_enable_serial(PME_DEV, 0x680);
lpc47m15x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); /* 0x3f8 */
-
- /* Set up the console */
- console_init();
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- printk(BIOS_DEBUG, "soft reset detected.\n");
- boot_mode = 1;
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- i82801gx_early_init();
- i945_early_initialization();
-
- s3resume = southbridge_detect_s3_resume();
-
- /* Enable SPD ROMs and DDR-II DRAM */
- enable_smbus();
-
- if (CONFIG(DEBUG_RAM_SETUP))
- dump_spd_registers();
-
- sdram_initialize(s3resume ? 2 : boot_mode, NULL);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
-
- /* Chipset Errata! */
- fixup_i945_errata();
-
- /* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization(s3resume);
}
diff --git a/src/mainboard/kontron/986lcd-m/romstage.c b/src/mainboard/kontron/986lcd-m/romstage.c
index d67a60b1e8..2c894534f3 100644
--- a/src/mainboard/kontron/986lcd-m/romstage.c
+++ b/src/mainboard/kontron/986lcd-m/romstage.c
@@ -13,20 +13,12 @@
* GNU General Public License for more details.
*/
-#include <stdint.h>
-#include <cf9_reset.h>
-#include <console/console.h>
-#include <arch/romstage.h>
-#include <cpu/x86/lapic.h>
-#include <device/pci_def.h>
#include <device/pci_ops.h>
#include <device/pnp_ops.h>
#include <device/pnp_def.h>
#include <pc80/mc146818rtc.h>
#include <northbridge/intel/i945/i945.h>
-#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
#include <superio/winbond/common/winbond.h>
#include <superio/winbond/w83627thg/w83627thg.h>
@@ -35,7 +27,7 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1)
/* Override the default lpc decode ranges */
-static void mb_lpc_decode(void)
+void mainboard_lpc_decode(void)
{
int lpt_en = 0;
if (read_option(lpt, 0) != 0)
@@ -49,7 +41,7 @@ static void mb_lpc_decode(void)
* the two. Also set up the GPIOs from the beginning. This is the "no schematic
* but safe anyways" method.
*/
-static void early_superio_config_w83627thg(void)
+void mainboard_superio_config(void)
{
pnp_devfn_t dev;
@@ -149,7 +141,7 @@ static void early_superio_config_w83627thg(void)
pnp_exit_conf_state(dev);
}
-static void rcba_config(void)
+void mainboard_late_rcba_config(void)
{
/* Set up virtual channel 0 */
@@ -167,48 +159,3 @@ static void rcba_config(void)
/* Enable PCIe Root Port Clock Gate */
}
-
-void mainboard_romstage_entry(void)
-{
- int s3resume = 0;
-
- enable_lapic();
-
- i82801gx_lpc_setup();
- mb_lpc_decode();
- early_superio_config_w83627thg();
-
- /* Set up the console */
- console_init();
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- system_reset();
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- i82801gx_early_init();
- i945_early_initialization();
-
- s3resume = southbridge_detect_s3_resume();
-
- /* Enable SPD ROMs and DDR-II DRAM */
- enable_smbus();
-
- if (CONFIG(DEBUG_RAM_SETUP))
- dump_spd_registers();
-
- sdram_initialize(s3resume ? 2 : 0, NULL);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
-
- /* Chipset Errata! */
- fixup_i945_errata();
-
- /* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization(s3resume);
-}
diff --git a/src/mainboard/lenovo/t60/romstage.c b/src/mainboard/lenovo/t60/romstage.c
index ab49e6e979..5076ada75f 100644
--- a/src/mainboard/lenovo/t60/romstage.c
+++ b/src/mainboard/lenovo/t60/romstage.c
@@ -15,25 +15,18 @@
* GNU General Public License for more details.
*/
-#include <stdint.h>
-#include <cf9_reset.h>
#include <delay.h>
+#include <stdint.h>
#include <device/pnp_ops.h>
#include <device/pci_ops.h>
-#include <device/pci_def.h>
#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <console/console.h>
-#include <arch/romstage.h>
#include <northbridge/intel/i945/i945.h>
-#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
#include <southbridge/intel/common/gpio.h>
-#include <southbridge/intel/common/pmclib.h>
#include "dock.h"
/* Override the default lpc decode ranges */
-static void mb_lpc_decode(void)
+void mainboard_lpc_decode(void)
{
// decode range
pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_IO_DEC, 0x0210);
@@ -55,7 +48,25 @@ static void early_superio_config(void)
pnp_set_enable(dev, 1);
}
-static void rcba_config(void)
+void mainboard_superio_config(void)
+{
+ /* Set up GPIO's early since it is needed for dock init */
+ i82801gx_setup_bars();
+ setup_pch_gpios(&mainboard_gpio_map);
+
+ int dock_err = dlpc_init();
+
+ /* We prefer Legacy I/O module over docking */
+ if (legacy_io_present()) {
+ legacy_io_init();
+ early_superio_config();
+ } else if (!dock_err && dock_present()) {
+ dock_connect();
+ early_superio_config();
+ }
+}
+
+void mainboard_late_rcba_config(void)
{
/* Set up virtual channel 0 */
RCBA32(V0CTL) = 0x80000001;
@@ -86,63 +97,8 @@ static void rcba_config(void)
RCBA64(IOTR3) = 0x000200f0000c0801ULL;
}
-void mainboard_romstage_entry(void)
+void mainboard_get_spd_map(u8 spd_map[4])
{
- int s3resume = 0;
- int dock_err;
- const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0, 0x51, 0 };
-
- enable_lapic();
-
- /* Set up GPIO's early since it is needed for dock init */
- i82801gx_setup_bars();
- setup_pch_gpios(&mainboard_gpio_map);
-
- i82801gx_lpc_setup();
- mb_lpc_decode();
-
- dock_err = dlpc_init();
-
- /* We prefer Legacy I/O module over docking */
- if (legacy_io_present()) {
- legacy_io_init();
- early_superio_config();
- } else if (!dock_err && dock_present()) {
- dock_connect();
- early_superio_config();
- }
-
- /* Setup the console */
- console_init();
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- system_reset();
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- i82801gx_early_init();
- i945_early_initialization();
-
- s3resume = southbridge_detect_s3_resume();
-
- /* Enable SPD ROMs and DDR-II DRAM */
- enable_smbus();
-
- if (CONFIG(DEBUG_RAM_SETUP))
- dump_spd_registers();
-
- sdram_initialize(s3resume ? 2 : 0, spd_addrmap);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
-
- /* Chipset Errata! */
- fixup_i945_errata();
-
- /* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization(s3resume);
+ spd_map[0] = 0x50;
+ spd_map[2] = 0x51;
}
diff --git a/src/mainboard/lenovo/x60/romstage.c b/src/mainboard/lenovo/x60/romstage.c
index 6eeb2d12ba..d230aa3c57 100644
--- a/src/mainboard/lenovo/x60/romstage.c
+++ b/src/mainboard/lenovo/x60/romstage.c
@@ -15,26 +15,18 @@
* GNU General Public License for more details.
*/
-#include <stdint.h>
-#include <cf9_reset.h>
#include <delay.h>
+#include <stdint.h>
+#include <device/pnp_def.h>
#include <device/pnp_ops.h>
#include <device/pci_ops.h>
-#include <device/pci_def.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <arch/acpi.h>
-#include <console/console.h>
-#include <arch/romstage.h>
#include <northbridge/intel/i945/i945.h>
-#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
#include <southbridge/intel/common/gpio.h>
-#include <southbridge/intel/common/pmclib.h>
#include "dock.h"
/* Override the default lpc decode ranges */
-static void mb_lpc_decode(void)
+void mainboard_lpc_decode(void)
{
// decode range
pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_IO_DEC, 0x0210);
@@ -56,7 +48,24 @@ static void early_superio_config(void)
pnp_set_enable(dev, 1);
}
-static void rcba_config(void)
+void mainboard_superio_config(void)
+{
+ /* Set up GPIO's early since it is needed for dock init */
+ i82801gx_setup_bars();
+ setup_pch_gpios(&mainboard_gpio_map);
+
+ dlpc_init();
+ /* dock_init initializes the DLPC switch on
+ * thinpad side, so this is required even
+ * if we're undocked.
+ */
+ if (dock_present()) {
+ dock_connect();
+ early_superio_config();
+ }
+}
+
+void mainboard_late_rcba_config(void)
{
/* Set up virtual channel 0 */
RCBA32(V0CTL) = 0x80000001;
@@ -87,68 +96,9 @@ static void rcba_config(void)
RCBA64(IOTR3) = 0x000200f0000c0801ULL;
}
-void mainboard_romstage_entry(void)
-{
- int s3resume = 0;
- const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0, 0x51, 0 };
-
- enable_lapic();
-
- /* Set up GPIO's early since it is needed for dock init */
- i82801gx_setup_bars();
- setup_pch_gpios(&mainboard_gpio_map);
- i82801gx_lpc_setup();
- mb_lpc_decode();
-
- dlpc_init();
- /* dock_init initializes the DLPC switch on
- * thinpad side, so this is required even
- * if we're undocked.
- */
- if (dock_present()) {
- dock_connect();
- early_superio_config();
- }
-
- /* Set up the console */
- console_init();
-
- if (dock_present())
- printk(BIOS_DEBUG, "Dock is present\n");
- else
- printk(BIOS_DEBUG, "Dock is not present\n");
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- printk(BIOS_DEBUG,
- "Soft reset detected, rebooting properly.\n");
- system_reset();
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- i82801gx_early_init();
- i945_early_initialization();
-
- s3resume = southbridge_detect_s3_resume();
-
- /* Enable SPD ROMs and DDR-II DRAM */
- enable_smbus();
-
- if (CONFIG(DEBUG_RAM_SETUP))
- dump_spd_registers();
-
- sdram_initialize(s3resume ? 2 : 0, spd_addrmap);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
-
- /* Chipset Errata! */
- fixup_i945_errata();
-
- /* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization(s3resume);
+void mainboard_get_spd_map(u8 spd_map[4])
+{
+ spd_map[0] = 0x50;
+ spd_map[2] = 0x51;
}
diff --git a/src/mainboard/roda/rk886ex/romstage.c b/src/mainboard/roda/rk886ex/romstage.c
index f1a638dad1..388c61a9a6 100644
--- a/src/mainboard/roda/rk886ex/romstage.c
+++ b/src/mainboard/roda/rk886ex/romstage.c
@@ -20,18 +20,13 @@
#include <device/pnp_ops.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
-#include <cpu/x86/lapic.h>
#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <arch/romstage.h>
#include <northbridge/intel/i945/i945.h>
-#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/pmclib.h>
#include "option_table.h"
/* Override the default lpc decode ranges */
-static void mb_lpc_decode(void)
+void mainboard_lpc_decode(void)
{
int lpt_en = 0;
if (read_option(lpt, 0) != 0)
@@ -59,7 +54,7 @@ static void pnp_exit_ext_func_mode(pnp_devfn_t dev)
outb(0xaa, port);
}
-static void early_superio_config(void)
+void mainboard_superio_config(void)
{
pnp_devfn_t dev;
@@ -94,7 +89,7 @@ static void early_superio_config(void)
pnp_exit_ext_func_mode(dev);
}
-static void rcba_config(void)
+void mainboard_late_rcba_config(void)
{
/* Set up virtual channel 0 */
@@ -129,50 +124,7 @@ static void init_artec_dongle(void)
outb(0xf4, 0x88);
}
-void mainboard_romstage_entry(void)
+void mainboard_pre_raminit_config(int s3_resume)
{
- int s3resume = 0;
-
- enable_lapic();
-
- i82801gx_lpc_setup();
- mb_lpc_decode();
- early_superio_config();
-
- /* Set up the console */
- console_init();
-
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- system_reset();
- }
-
- /* Perform some early chipset initialization required
- * before RAM initialization can work
- */
- i82801gx_early_init();
- i945_early_initialization();
-
- /* This has to happen after i945_early_initialization() */
init_artec_dongle();
-
- s3resume = southbridge_detect_s3_resume();
-
- /* Enable SPD ROMs and DDR-II DRAM */
- enable_smbus();
-
- if (CONFIG(DEBUG_RAM_SETUP))
- dump_spd_registers();
-
- sdram_initialize(s3resume ? 2 : 0, NULL);
-
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
-
- /* Chipset Errata! */
- fixup_i945_errata();
-
- /* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization(s3resume);
}
diff --git a/src/northbridge/intel/i945/Makefile.inc b/src/northbridge/intel/i945/Makefile.inc
index af3c23580c..585d61b218 100644
--- a/src/northbridge/intel/i945/Makefile.inc
+++ b/src/northbridge/intel/i945/Makefile.inc
@@ -20,6 +20,7 @@ ramstage-y += northbridge.c
ramstage-y += gma.c
ramstage-y += acpi.c
+romstage-y += romstage.c
romstage-y += memmap.c
romstage-y += raminit.c
romstage-y += early_init.c
diff --git a/src/northbridge/intel/i945/i945.h b/src/northbridge/intel/i945/i945.h
index 4dd5379469..e9e6f4d094 100644
--- a/src/northbridge/intel/i945/i945.h
+++ b/src/northbridge/intel/i945/i945.h
@@ -375,6 +375,18 @@ void sdram_dump_mchbar_registers(void);
u32 decode_igd_memory_size(u32 gms);
u32 decode_tseg_size(const u8 esmramc);
+/* Romstage mainboard callbacks */
+/* Optional: Override the default LPC config. */
+void mainboard_lpc_decode(void);
+/* Optional: Initialize the superio for serial output. */
+void mainboard_superio_config(void);
+/* Optional: mainboard specific init after console init and before raminit. */
+void mainboard_pre_raminit_config(int s3_resume);
+/* Mainboard specific RCBA init. Happens after raminit. */
+void mainboard_late_rcba_config(void);
+/* Optional: mainboard callback to get SPD map */
+void mainboard_get_spd_map(u8 spd_map[4]);
+
#endif /* __ACPI__ */
#endif /* NORTHBRIDGE_INTEL_I945_H */
diff --git a/src/northbridge/intel/i945/romstage.c b/src/northbridge/intel/i945/romstage.c
new file mode 100644
index 0000000000..c11a78ab0e
--- /dev/null
+++ b/src/northbridge/intel/i945/romstage.c
@@ -0,0 +1,95 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <cf9_reset.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <arch/romstage.h>
+#include <northbridge/intel/i945/i945.h>
+#include <northbridge/intel/i945/raminit.h>
+#include <southbridge/intel/i82801gx/i82801gx.h>
+#include <southbridge/intel/common/pmclib.h>
+
+__weak void mainboard_lpc_decode(void)
+{
+}
+
+__weak void mainboard_superio_config(void)
+{
+}
+
+__weak void mainboard_pre_raminit_config(int s3_resume)
+{
+}
+
+__weak void mainboard_get_spd_map(u8 spd_map[4])
+{
+ spd_map[0] = 0x50;
+ spd_map[1] = 0x51;
+ spd_map[2] = 0x52;
+ spd_map[3] = 0x53;
+}
+
+void mainboard_romstage_entry(void)
+{
+ int s3resume = 0;
+ u8 spd_map[4] = {};
+
+ enable_lapic();
+
+ i82801gx_lpc_setup();
+ mainboard_lpc_decode();
+ mainboard_superio_config();
+
+ /* Set up the console */
+ console_init();
+
+ if (MCHBAR16(SSKPD) == 0xCAFE) {
+ system_reset();
+ }
+
+ /* Perform some early chipset initialization required
+ * before RAM initialization can work
+ */
+ i82801gx_early_init();
+ i945_early_initialization();
+
+ s3resume = southbridge_detect_s3_resume();
+
+ /* Enable SPD ROMs and DDR-II DRAM */
+ enable_smbus();
+
+ mainboard_pre_raminit_config(s3resume);
+
+ if (CONFIG(DEBUG_RAM_SETUP))
+ dump_spd_registers();
+
+ mainboard_get_spd_map(spd_map);
+
+ sdram_initialize(s3resume ? 2 : 0, spd_map);
+
+ /* This should probably go away. Until now it is required
+ * and mainboard specific
+ */
+ mainboard_late_rcba_config();
+
+ /* Chipset Errata! */
+ fixup_i945_errata();
+
+ /* Initialize the internal PCIe links before we go into stage2 */
+ i945_late_initialization(s3resume);
+}