summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/config/Options.lb5
-rw-r--r--src/include/cpu/x86/smm.h253
-rw-r--r--src/include/device/device.h4
-rw-r--r--src/southbridge/intel/i82801gx/Config.lb66
-rw-r--r--src/southbridge/intel/i82801gx/IOMAP35
-rw-r--r--src/southbridge/intel/i82801gx/chip.h33
-rw-r--r--src/southbridge/intel/i82801gx/cmos_failover.c35
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx.c34
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx.h122
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_ac97.c71
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_early_smbus.c59
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_ide.c100
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_lpc.c361
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_nic.c50
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_nvs.h108
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_pci.c141
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_pcie.c126
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_reset.c27
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_sata.c190
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_smbus.c59
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_smbus.h187
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_smi.c335
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_usb.c79
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c84
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_watchdog.c52
-rw-r--r--src/southbridge/intel/i82801gx/smihandler.c551
-rw-r--r--src/southbridge/intel/i82801gx/smm.ld53
-rw-r--r--src/southbridge/intel/i82801gx/smmhandler.S201
-rw-r--r--src/southbridge/intel/i82801gx/smmrelocate.S168
29 files changed, 3587 insertions, 2 deletions
diff --git a/src/config/Options.lb b/src/config/Options.lb
index 8e9f89d49c..6815e6c933 100644
--- a/src/config/Options.lb
+++ b/src/config/Options.lb
@@ -856,6 +856,11 @@ define HAVE_HARD_RESET
export used
comment "Have hard reset"
end
+define HAVE_SMI_HANDLER
+ default none
+ export used
+ comment "Set, if the board needs an SMI handler"
+end
define MEMORY_HOLE
default none
export used
diff --git a/src/include/cpu/x86/smm.h b/src/include/cpu/x86/smm.h
new file mode 100644
index 0000000000..72a4782084
--- /dev/null
+++ b/src/include/cpu/x86/smm.h
@@ -0,0 +1,253 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+typedef uint64_t u64;
+
+/* AMD64 SMM State-Save Area
+ * starts @ 0x7e00
+ */
+typedef struct {
+ u16 es_selector;
+ u16 es_attributes;
+ u32 es_limit;
+ u64 es_base;
+
+ u16 cs_selector;
+ u16 cs_attributcs;
+ u32 cs_limit;
+ u64 cs_base;
+
+ u16 ss_selector;
+ u16 ss_attributss;
+ u32 ss_limit;
+ u64 ss_base;
+
+ u16 ds_selector;
+ u16 ds_attributds;
+ u32 ds_limit;
+ u64 ds_base;
+
+ u16 fs_selector;
+ u16 fs_attributfs;
+ u32 fs_limit;
+ u64 fs_base;
+
+ u16 gs_selector;
+ u16 gs_attributgs;
+ u32 gs_limit;
+ u64 gs_base;
+
+ u8 reserved0[4];
+ u16 gdtr_limit;
+ u8 reserved1[2];
+ u64 gdtr_base;
+
+ u16 ldtr_selector;
+ u16 ldtr_attributes;
+ u32 ldtr_limit;
+ u64 ldtr_base;
+
+ u8 reserved2[4];
+ u16 idtr_limit;
+ u8 reserved3[2];
+ u64 idtr_base;
+
+ u16 tr_selector;
+ u16 tr_attributes;
+ u32 tr_limit;
+ u64 tr_base;
+
+ u8 reserved4[40];
+
+ u8 io_restart;
+ u8 autohalt_restart;
+
+ u8 reserved5[6];
+
+ u64 efer;
+
+ u8 reserved6[36];
+
+ u32 smm_revision;
+ u32 smbase;
+
+ u8 reserved7[68];
+
+ u64 cr4;
+ u64 cr3;
+ u64 cr0;
+ u64 dr7;
+ u64 dr6;
+
+ u64 rflags;
+ u64 rip;
+ u64 r15;
+ u64 r14;
+ u64 r13;
+ u64 r12;
+ u64 r11;
+ u64 r10;
+ u64 r9;
+ u64 r8;
+
+ u64 rdi;
+ u64 rsi;
+ u64 rpb;
+ u64 rsp;
+ u64 rbx;
+ u64 rdx;
+ u64 rcx;
+ u64 rax;
+} __attribute__((packed)) amd64_smm_state_save_area_t;
+
+
+/* Intel Core 2 (EM64T) SMM State-Save Area
+ * starts @ 0x7d00
+ */
+typedef struct {
+ u8 reserved0[208];
+
+ u32 gdtr_upper_base;
+ u32 ldtr_upper_base;
+ u32 idtr_upper_base;
+
+ u8 reserved1[4];
+
+ u64 io_rdi;
+ u64 io_rip;
+ u64 io_rcx;
+ u64 io_rsi;
+ u64 cr4;
+
+ u8 reserved2[68];
+
+ u64 gdtr_base;
+ u64 idtr_base;
+ u64 ldtr_base;
+
+ u8 reserved3[84];
+
+ u32 smm_revision;
+ u32 smbase;
+
+ u16 io_restart;
+ u16 autohalt_restart;
+
+ u8 reserved4[24];
+
+ u64 r15;
+ u64 r14;
+ u64 r13;
+ u64 r12;
+ u64 r11;
+ u64 r10;
+ u64 r9;
+ u64 r8;
+
+ u64 rax;
+ u64 rcx;
+ u64 rdx;
+ u64 rbx;
+
+ u64 rsp;
+ u64 rbp;
+ u64 rsi;
+ u64 rdi;
+
+
+ u64 io_mem_addr;
+ u32 io_misc_info;
+
+ u32 es_sel;
+ u32 cs_sel;
+ u32 ss_sel;
+ u32 ds_sel;
+ u32 fs_sel;
+ u32 gs_sel;
+
+ u32 ldtr_sel;
+ u32 tr_sel;
+
+ u64 dr7;
+ u64 dr6;
+ u64 rip;
+ u64 efer;
+ u64 rflags;
+
+ u64 cr3;
+ u64 cr0;
+} __attribute__((packed)) em64t_smm_state_save_area_t;
+
+
+/* Legacy x86 SMM State-Save Area
+ * starts @ 0x7e00
+ */
+
+typedef struct {
+ u8 reserved0[248];
+ u32 smbase;
+ u32 smm_revision;
+ u16 io_restart;
+ u16 autohalt_restart;
+ u8 reserved1[132];
+ u32 gdtbase;
+ u8 reserved2[8];
+ u32 idtbase;
+ u8 reserved3[16];
+ u32 es;
+ u32 cs;
+ u32 ss;
+ u32 ds;
+ u32 fs;
+ u32 gs;
+ u32 ldtbase;
+ u32 tr;
+ u32 dr7;
+ u32 dr6;
+ u32 eax;
+ u32 ecx;
+ u32 edx;
+ u32 ebx;
+ u32 esp;
+ u32 ebp;
+ u32 esi;
+ u32 edi;
+ u32 eip;
+ u32 eflags;
+ u32 cr3;
+ u32 cr0;
+} __attribute__((packed)) legacy_smm_state_save_area_t;
+
+typedef enum {
+ AMD64,
+ EM64T,
+ LEGACY
+} save_state_type_t;
+
+
+typedef struct {
+ save_state_type_t type;
+ union {
+ amd64_smm_state_save_area_t *amd64_state_save;
+ em64t_smm_state_save_area_t *em64t_state_save;
+ legacy_smm_state_save_area_t *legacy_state_save;
+ };
+} smm_state_save_area_t;
+
diff --git a/src/include/device/device.h b/src/include/device/device.h
index 09d163cf59..284c096016 100644
--- a/src/include/device/device.h
+++ b/src/include/device/device.h
@@ -71,7 +71,7 @@ struct device {
struct device_path path;
unsigned vendor;
unsigned device;
- unsigned int class; /* 3 bytes: (base,sub,prog-if) */
+ unsigned int class; /* 3 bytes: (base, sub, prog-if) */
unsigned int hdr_type; /* PCI header type */
unsigned int enabled : 1; /* set if we should enable the device */
unsigned int initialized : 1; /* set if we have initialized the device */
@@ -85,7 +85,7 @@ struct device {
struct resource resource[MAX_RESOURCES];
unsigned int resources;
- /* link are (down sream) buses attached to the device, usually a leaf
+ /* link are (down stream) buses attached to the device, usually a leaf
* device with no children have 0 buses attached and a bridge has 1 bus
*/
struct bus link[MAX_LINKS];
diff --git a/src/southbridge/intel/i82801gx/Config.lb b/src/southbridge/intel/i82801gx/Config.lb
new file mode 100644
index 0000000000..3117ad2025
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/Config.lb
@@ -0,0 +1,66 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config chip.h
+driver i82801gx.o
+driver i82801gx_ac97.o
+driver i82801gx_ide.o
+driver i82801gx_lpc.o
+driver i82801gx_nic.o
+driver i82801gx_pci.o
+driver i82801gx_pcie.o
+driver i82801gx_sata.o
+driver i82801gx_usb.o
+driver i82801gx_usb_ehci.o
+
+object i82801gx_reset.o
+object i82801gx_watchdog.o
+
+object i82801gx_smi.o
+object smmrelocate.S
+
+makerule smmhandler.o
+ depends "$(TOP)/src/southbridge/intel/i82801gx/smmhandler.S"
+ action "@$(CC) -c $(CPU_OPT) $(CPPFLAGS) $(CFLAGS) -o $@ $<"
+end
+
+makerule smihandler.o
+ depends "$(TOP)/src/southbridge/intel/i82801gx/smihandler.c"
+ action "@$(CC) -c $(CPU_OPT) $(CPPFLAGS) $(CFLAGS) -o $@ $<"
+end
+
+makerule smm.o
+ depends "smmhandler.o smihandler.o printk.o vtxprintf.o $(LIBGCC_FILE_NAME)"
+ action "$(CC) $(DISTRO_LFLAGS) -nostdlib -r -o $@ smmhandler.o smihandler.o printk.o vtxprintf.o $(LIBGCC_FILE_NAME)"
+end
+
+makerule smm
+ depends "smm.o $(TOP)/src/southbridge/intel/i82801gx/smm.ld ldoptions"
+ action "$(CC) $(DISTRO_LFLAGS) -nostdlib -nostartfiles -static -o smm.elf -T $(TOP)/src/southbridge/intel/i82801gx/smm.ld smm.o"
+ action "$(CROSS_COMPILE)nm -n smm.elf | sort > smm.map"
+ action "$(OBJCOPY) -O binary smm.elf smm"
+end
+
+makerule smm_bin.c
+ depends "smm"
+ action "(echo 'unsigned char smm[] = {'; od -vtx1 smm | sed -e 's,^[0-9]* *,,' -e 's:[0-9a-f][0-9a-f] :0x&,:g' -e 's:[0-9a-f][0-9a-f]$$:0x&,:'; echo '}; unsigned int smm_len = '; wc -c smm |awk '{print $$1;}' ; echo ';') > smm_bin.c"
+end
+
+object ./smm_bin.o
diff --git a/src/southbridge/intel/i82801gx/IOMAP b/src/southbridge/intel/i82801gx/IOMAP
new file mode 100644
index 0000000000..6c20f667d7
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/IOMAP
@@ -0,0 +1,35 @@
+Non-automatic IO-Addresses
+--------------------------
+
+The following dynamic IO BARs are used on the ICH7 for the Kontron Default BIOS:
+
+GPIOBASE 0x480 (64 bytes)
+PMBASE 0x800 (128 bytes)
+SMBASE 0x400 (32 bytes)
+HWMON 0xa00 (??)
+
+The following dynamic IO BARs are used on the ICH7 for the Getac Default BIOS:
+
+GPIOBASE 0x1180 (64 bytes)
+PMBASE 0x1000 (128 bytes)
+SMBASE 0x18e0 (32 bytes)
+
+The Getac also needs an IO Trapped area of 0x0C bytes (defaults to 0x800)
+
+coreboot:
+GPIOBASE 0x480 (64 bytes)
+PMBASE 0x500 (128 bytes)
+SMBASE 0x400 (32 bytes)
+HWMON 0xa00 (??)
+
+
+
+NOTE: Coreboot sets the SMBASE to 0xf00 in auto.c. But it gets relocated
+in stage2 because its a "normal BAR" (to 0x2080 in one case here).
+
+This is not unhealthy but at least confusing. We should provide a method to
+nail down certain resources for stage2.
+
+For a list of static I/O space allocation look at 6.3.1 of the ICH7 Family
+Datasheet.
+
diff --git a/src/southbridge/intel/i82801gx/chip.h b/src/southbridge/intel/i82801gx/chip.h
new file mode 100644
index 0000000000..755c317531
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/chip.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SOUTHBRIDGE_INTEL_I82801GX_CHIP_H
+#define SOUTHBRIDGE_INTEL_I82801GX_CHIP_H
+
+struct southbridge_intel_i82801gx_config {
+ uint32_t ide_legacy_combined;
+ uint32_t ide_enable_primary;
+ uint32_t ide_enable_secondary;
+ uint32_t sata_ahci;
+};
+
+extern struct chip_operations southbridge_intel_i82801gx_ops;
+
+#endif /* SOUTHBRIDGE_INTEL_I82801GX_CHIP_H */
diff --git a/src/southbridge/intel/i82801gx/cmos_failover.c b/src/southbridge/intel/i82801gx/cmos_failover.c
new file mode 100644
index 0000000000..ec5ec6a34b
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/cmos_failover.c
@@ -0,0 +1,35 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "i82801gx.h"
+
+#define RTC_FAILED (1 <<2)
+#define GEN_PMCON_3 0xa4
+
+static void check_cmos_failed(void)
+{
+ u8 byte;
+ byte = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3);
+ if (byte & RTC_FAILED) {
+ // clear bit 1 and bit 2
+ byte = cmos_read(RTC_BOOT_BYTE);
+ byte &= 0x0c;
+ byte |= MAX_REBOOT_CNT << 4;
+ cmos_write(byte, RTC_BOOT_BYTE);
+ }
+}
diff --git a/src/southbridge/intel/i82801gx/i82801gx.c b/src/southbridge/intel/i82801gx/i82801gx.c
new file mode 100644
index 0000000000..6daa57dbe3
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx.c
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include "i82801gx.h"
+
+void i82801gx_enable(device_t dev)
+{
+
+}
+
+struct chip_operations southbridge_intel_i82801gx_ops = {
+ CHIP_NAME("Intel ICH7/ICH7-M (82801Gx) Series Southbridge")
+ .enable_dev = i82801gx_enable,
+};
diff --git a/src/southbridge/intel/i82801gx/i82801gx.h b/src/southbridge/intel/i82801gx/i82801gx.h
new file mode 100644
index 0000000000..1601dc3d71
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx.h
@@ -0,0 +1,122 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H
+#define SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H
+
+#include "chip.h"
+extern void i82801gx_enable(device_t dev);
+
+#define PCI_DMA_CFG 0x90
+#define SERIRQ_CNTL 0x64
+#define GEN_CNTL 0xd0
+#define GEN_STS 0xd4
+#define RTC_CONF 0xd8
+#define GEN_PMCON_1 0xa0
+#define GEN_PMCON_2 0xa2
+#define GEN_PMCON_3 0xa4
+
+#define PMBASE 0x40
+#define ACPI_CNTL 0x44
+#define BIOS_CNTL 0x4E
+#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */
+#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */
+
+#define PIRQA_ROUT 0x60
+#define PIRQB_ROUT 0x61
+#define PIRQC_ROUT 0x62
+#define PIRQD_ROUT 0x63
+#define PIRQE_ROUT 0x68
+#define PIRQF_ROUT 0x69
+#define PIRQG_ROUT 0x6A
+#define PIRQH_ROUT 0x6B
+
+#define FUNC_DIS 0xF2
+
+#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */
+#define LPC_EN 0x82 /* LPC IF Enables Register */
+
+#define SBUS_NUM 0x19
+#define SUB_BUS_NUM 0x1A
+#define SMLT 0x1B
+#define IOBASE 0x1C
+#define IOLIM 0x1D
+#define MEMBASE 0x20
+#define MEMLIM 0x22
+#define CNF 0x50
+#define MTT 0x70
+#define PCI_MAST_STS 0x82
+
+/* GEN_PMCON_3 bits */
+#define RTC_BATTERY_DEAD (1 << 2)
+#define RTC_POWER_FAILED (1 << 1)
+#define SLEEP_AFTER_POWER_FAIL (1 << 0)
+
+/* PCI Configuration Space (D31:F1) */
+#define INTR_LN 0x3c
+#define IDE_TIM_PRI 0x40 /* IDE timings, primary */
+#define IDE_DECODE_ENABLE (1 << 15)
+#define IDE_SITRE (1 << 14)
+#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
+#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */
+#define SIG_MODE_NORMAL (0 << 16)
+#define SIG_MODE_TRISTATE (1 << 16)
+#define SIG_MODE_DRIVELOW (2 << 16)
+#define FAST_PCB1 (1 << 13)
+#define FAST_PCB0 (1 << 12)
+#define PCB1 (1 << 1)
+#define PCB0 (1 << 0)
+
+/* PCI Configuration Space (D31:F3) */
+#define SMB_BASE 0x20
+#define HOSTC 0x40
+
+/* HOSTC bits */
+#define I2C_EN (1 << 2)
+#define SMB_SMI_EN (1 << 1)
+#define HST_EN (1 << 0)
+
+/* SMBus I/O bits.
+ * TODO: It does not matter where we put the SMBus IO base, as long as we keep
+ * consistent and don't interfere with other devices. Stage2 will relocate
+ * this anyways. But it's a general problem we have not solved in the brightest
+ * possible way.
+ */
+/* #define SMBUS_IO_BASE 0x1000 */
+#define SMBUS_IO_BASE 0x0400
+
+#define SMBHSTSTAT 0x0
+#define SMBHSTCTL 0x2
+#define SMBHSTCMD 0x3
+#define SMBXMITADD 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBBLKDAT 0x7
+#define SMBTRNSADD 0x9
+#define SMBSLVDATA 0xa
+#define SMLINK_PIN_CTL 0xe
+#define SMBUS_PIN_CTL 0xf
+
+#define SMBUS_TIMEOUT (10 * 1000 * 100)
+
+/* HPET, if present */
+#define HPET_ADDR 0xfed0000
+
+#endif /* SOUTHBRIDGE_INTEL_I82801GX_I82801GX_H */
diff --git a/src/southbridge/intel/i82801gx/i82801gx_ac97.c b/src/southbridge/intel/i82801gx/i82801gx_ac97.c
new file mode 100644
index 0000000000..b9c31992b4
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_ac97.c
@@ -0,0 +1,71 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "i82801gx.h"
+
+static void ac97_audio_init(struct device *dev)
+{
+ // XXX init AC97 codecs.
+}
+
+static void ac97_modem_init(struct device *dev)
+{
+ // XXX init modem?
+}
+
+static struct device_operations ac97_audio_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = ac97_audio_init,
+ .scan_bus = 0,
+ .enable = i82801gx_enable,
+};
+
+static struct device_operations ac97_modem_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = ac97_modem_init,
+ .scan_bus = 0,
+ .enable = i82801gx_enable,
+};
+
+
+
+/* 82801GB/GR/GDH/GBM/GHM (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH) */
+/* Note: 82801GU (ICH7-U) doesn't have AC97 audio/modem. */
+
+static const struct pci_driver i82801gb_ac97_audio __pci_driver = {
+ .ops = &ac97_audio_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801GB_AC97_AUDIO,
+};
+
+static const struct pci_driver i82801gb_ac97_modem __pci_driver = {
+ .ops = &ac97_modem_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801GB_AC97_MODEM,
+};
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_early_smbus.c b/src/southbridge/intel/i82801gx/i82801gx_early_smbus.c
new file mode 100644
index 0000000000..5fe1daa279
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_early_smbus.c
@@ -0,0 +1,59 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/pci_ids.h>
+#include "i82801gx.h"
+#include "i82801gx_smbus.h"
+
+static void enable_smbus(void)
+{
+ device_t dev;
+
+ /* Set the SMBus device statically. */
+ dev = PCI_DEV(0x0, 0x1f, 0x3);
+
+ /* Check to make sure we've got the right device. */
+ if (pci_read_config16(dev, 0x2) != 0x27da) {
+ die("SMBus controller not found!");
+ }
+
+ /* Set SMBus I/O base. */
+ pci_write_config32(dev, SMB_BASE,
+ SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+
+ /* Set SMBus enable. */
+ pci_write_config8(dev, HOSTC, HST_EN);
+
+ /* Set SMBus I/O space enable. */
+ pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+
+ /* Disable interrupt generation. */
+ outb(0, SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* Clear any lingering errors, so transactions can run. */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+ print_debug("SMBus controller enabled.\r\n");
+}
+
+static inline int smbus_read_byte(unsigned device, unsigned address)
+{
+ return do_smbus_read_byte(device, address);
+}
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_ide.c b/src/southbridge/intel/i82801gx/i82801gx_ide.c
new file mode 100644
index 0000000000..d090e41d0e
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_ide.c
@@ -0,0 +1,100 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "i82801gx.h"
+
+typedef struct southbridge_intel_i82801gx_config config_t;
+
+static void ide_init(struct device *dev)
+{
+ u16 ideTimingConfig;
+ u32 reg32;
+
+ /* Get the chip configuration */
+ config_t *config = dev->chip_info;
+
+ int enable_primary = config->ide_enable_primary;
+ int enable_secondary = config->ide_enable_secondary;
+
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_IO | PCI_COMMAND_MASTER);
+
+ /* Native Capable, but not enabled. */
+ pci_write_config8(dev, 0x09, 0x8a);
+
+ ideTimingConfig = pci_read_config16(dev, IDE_TIM_PRI);
+ ideTimingConfig &= ~IDE_DECODE_ENABLE;
+ ideTimingConfig |= IDE_SITRE;
+ if (enable_primary) {
+ /* Enable primary IDE interface. */
+ ideTimingConfig |= IDE_DECODE_ENABLE;
+ ideTimingConfig |= (2 << 12); // ISP = 3 clocks
+ ideTimingConfig |= (3 << 8); // RCT = 1 clock
+ ideTimingConfig |= (1 << 1); // IE0
+ ideTimingConfig |= (1 << 0); // TIME0
+ printk_debug("IDE0 ");
+ }
+ pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig);
+
+ ideTimingConfig = pci_read_config16(dev, IDE_TIM_SEC);
+ ideTimingConfig &= ~IDE_DECODE_ENABLE;
+ ideTimingConfig |= IDE_SITRE;
+ if (enable_secondary) {
+ /* Enable secondary IDE interface. */
+ ideTimingConfig |= IDE_DECODE_ENABLE;
+ ideTimingConfig |= (2 << 12); // ISP = 3 clocks
+ ideTimingConfig |= (3 << 8); // RCT = 1 clock
+ ideTimingConfig |= (1 << 1); // IE0
+ ideTimingConfig |= (1 << 0); // TIME0
+ printk_debug("IDE1 ");
+ }
+ pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig);
+
+ /* Set IDE I/O Configuration */
+ if (enable_secondary)
+ reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+ else
+ reg32 = SIG_MODE_NORMAL | FAST_PCB1 | PCB1;
+ pci_write_config32(dev, IDE_CONFIG, reg32);
+
+ /* Set Interrupt Line */
+ /* Interrupt Pin is set by D31IP.PIP */
+ pci_write_config32(dev, INTR_LN, 0xff); /* Int 15 */
+}
+
+static struct device_operations ide_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = ide_init,
+ .scan_bus = 0,
+ .enable = i82801gx_enable,
+};
+
+/* 82801Gx */
+static const struct pci_driver i82801gx_ide __pci_driver = {
+ .ops = &ide_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27df,
+};
diff --git a/src/southbridge/intel/i82801gx/i82801gx_lpc.c b/src/southbridge/intel/i82801gx/i82801gx_lpc.c
new file mode 100644
index 0000000000..e796951a62
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_lpc.c
@@ -0,0 +1,361 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <pc80/mc146818rtc.h>
+#include <pc80/isa-dma.h>
+#include <arch/io.h>
+#include "i82801gx.h"
+
+#include "../../../northbridge/intel/i945/ich7.h"
+
+#define MAINBOARD_POWER_OFF 0
+#define MAINBOARD_POWER_ON 1
+
+#ifndef MAINBOARD_POWER_ON_AFTER_FAIL
+#define MAINBOARD_POWER_ON_AFTER_FAIL MAINBOARD_POWER_ON
+#endif
+
+#define NMI_OFF 0
+
+/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
+ * 0x00 - 0000 = Reserved
+ * 0x01 - 0001 = Reserved
+ * 0x02 - 0010 = Reserved
+ * 0x03 - 0011 = IRQ3
+ * 0x04 - 0100 = IRQ4
+ * 0x05 - 0101 = IRQ5
+ * 0x06 - 0110 = IRQ6
+ * 0x07 - 0111 = IRQ7
+ * 0x08 - 1000 = Reserved
+ * 0x09 - 1001 = IRQ9
+ * 0x0A - 1010 = IRQ10
+ * 0x0B - 1011 = IRQ11
+ * 0x0C - 1100 = IRQ12
+ * 0x0D - 1101 = Reserved
+ * 0x0E - 1110 = IRQ14
+ * 0x0F - 1111 = IRQ15
+ * PIRQ[n]_ROUT[7] - PIRQ Routing Control
+ * 0x80 - The PIRQ is not routed.
+ */
+
+#define PIRQA 0x03
+#define PIRQB 0x05
+#define PIRQC 0x06
+#define PIRQD 0x07
+#define PIRQE 0x09
+#define PIRQF 0x0A
+#define PIRQG 0x0B
+#define PIRQH 0x0C
+
+static void i82801gx_enable_apic(struct device *dev)
+{
+ int i;
+ u32 reg32;
+ volatile u32 *ioapic_index = (volatile u32 *)0xfec00000;
+ volatile u32 *ioapic_data = (volatile u32 *)0xfec00010;
+
+ /* Enable ACPI I/O and power management. */
+ pci_write_config8(dev, ACPI_CNTL, 0x80);
+
+ *ioapic_index = 0;
+ *ioapic_data = (1 << 25);
+
+ *ioapic_index = 0;
+ reg32 = *ioapic_data;
+ printk_debug("Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
+ if (reg32 != (1 << 25))
+ die("APIC Error\n");
+
+ printk_spew("Dumping IOAPIC registers\n");
+ for (i=0; i<3; i++) {
+ *ioapic_index = i;
+ printk_spew(" reg 0x%04x:", i);
+ reg32 = *ioapic_data;
+ printk_spew(" 0x%08x\n", reg32);
+ }
+
+ *ioapic_index = 3; /* Select Boot Configuration register. */
+ *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
+}
+
+static void i82801gx_enable_serial_irqs(struct device *dev)
+{
+ /* Set packet length and toggle silent mode bit for one frame. */
+ pci_write_config8(dev, SERIRQ_CNTL,
+ (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
+}
+
+static void i82801gx_pirq_init(device_t dev)
+{
+ pci_write_config8(dev, PIRQA_ROUT, 0x85);
+ pci_write_config8(dev, PIRQB_ROUT, 0x87);
+ pci_write_config8(dev, PIRQC_ROUT, 0x86);
+ pci_write_config8(dev, PIRQD_ROUT, 0x87);
+
+ pci_write_config8(dev, PIRQE_ROUT, 0x80);
+ pci_write_config8(dev, PIRQF_ROUT, 0x80);
+ pci_write_config8(dev, PIRQG_ROUT, 0x80);
+ pci_write_config8(dev, PIRQH_ROUT, 0x85);
+}
+
+static void i82801gx_power_options(device_t dev)
+{
+ u8 reg8;
+ u16 reg16;
+
+ int pwr_on=MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+ int nmi_option;
+
+ /* Which state do we want to goto after g3 (power restored)?
+ * 0 == S0 Full On
+ * 1 == S5 Soft Off
+ */
+ get_option(&pwr_on, "power_on_after_fail");
+ reg8 = pci_read_config8(dev, GEN_PMCON_3);
+ reg8 &= 0xfe;
+ if (pwr_on) {
+ reg8 &= ~1;
+ } else {
+ reg8 |= 1;
+ }
+ reg8 |= (3 << 4); /* avoid #S4 assertions */
+
+ pci_write_config8(dev, GEN_PMCON_3, reg8);
+ printk_info("Set power %s after power failure.\n", pwr_on ? "on" : "off");
+
+ /* Set up NMI on errors. */
+ reg8 = inb(0x61);
+ reg8 &= 0x0f; /* Higher Nibble must be 0 */
+ reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */
+ // reg8 &= ~(1 << 2); /* PCI SERR# Enable */
+ reg8 |= (1 << 2); /* PCI SERR# Disable for now */
+ outb(reg8, 0x61);
+
+ reg8 = inb(0x70);
+ nmi_option = NMI_OFF;
+ get_option(&nmi_option, "nmi");
+ if (nmi_option) {
+ printk_info ("NMI sources enabled.\n");
+ reg8 &= ~(1 << 7); /* Set NMI. */
+ } else {
+ printk_info ("NMI sources disabled.\n");
+ reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */
+ }
+ outb(reg8, 0x70);
+
+ // Enable CPU_SLP# and Intel Speedstep, set SMI# rate down
+ reg16 = pci_read_config16(dev, GEN_PMCON_1);
+ reg16 &= ~3;
+ reg16 |= (1 << 3) | (1 << 5) | (1 << 10);
+ pci_write_config16(dev, GEN_PMCON_1, reg16);
+
+ // Set GPIO13 to SCI (?)
+ // This might be board specific
+ pci_write_config32(dev, 0xb8, 0x08000000);
+}
+
+void i82801gx_rtc_init(struct device *dev)
+{
+ u8 reg8;
+ u32 reg32;
+ int rtc_failed;
+
+ reg8 = pci_read_config8(dev, GEN_PMCON_3);
+ rtc_failed = reg8 & RTC_BATTERY_DEAD;
+ if (rtc_failed) {
+ reg8 &= ~RTC_BATTERY_DEAD;
+ pci_write_config8(dev, GEN_PMCON_3, reg8);
+ }
+ printk_debug("rtc_failed = 0x%x\n", rtc_failed);
+
+ rtc_init(rtc_failed);
+}
+
+static void enable_hpet(struct device *dev)
+{
+ u32 reg32;
+ u32 code = (0 & 0x3);
+
+ reg32 = pci_read_config32(dev, GEN_CNTL);
+ reg32 |= (1 << 17); /* Enable HPET. */
+ /*
+ * Bits [16:15] Memory Address Range
+ * 00 FED0_0000h - FED0_03FFh
+ * 01 FED0_1000h - FED0_13FFh
+ * 10 FED0_2000h - FED0_23FFh
+ * 11 FED0_3000h - FED0_33FFh
+ */
+ reg32 &= ~(3 << 15); /* Clear it */
+ reg32 |= (code << 15);
+ /* TODO: reg32 is never written to anywhere? */
+ printk_debug("Enabling HPET @0x%x\n", HPET_ADDR | (code << 12));
+}
+
+static void i82801gx_lock_smm(struct device *dev)
+{
+ void smm_lock(void);
+ u8 reg8;
+
+#if ENABLE_ACPI_MODE_IN_COREBOOT
+ printk_debug("Enabling ACPI via APMC:\n");
+ outb(0xe1, 0xb2); // Enable ACPI mode
+ printk_debug("done.\n");
+#else
+ printk_debug("Disabling ACPI via APMC:\n");
+ outb(0x1e, 0xb2); // Disable ACPI mode
+ printk_debug("done.\n");
+#endif
+ /* Don't allow evil boot loaders, kernels, or
+ * userspace applications to deceive us:
+ */
+ smm_lock();
+
+#if TEST_SMM_FLASH_LOCKDOWN
+ /* Now try this: */
+ printk_debug("Locking BIOS to RO... ");
+ reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
+ (reg8&1)?"rw":"ro");
+ reg8 &= ~(1 << 0); /* clear BIOSWE */
+ pci_write_config8(dev, 0xdc, reg8);
+ reg8 |= (1 << 1); /* set BLE */
+ pci_write_config8(dev, 0xdc, reg8);
+ printk_debug("ok.\n");
+ reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
+ (reg8&1)?"rw":"ro");
+
+ printk_debug("Writing:\n");
+ *(volatile u8 *)0xfff00000 = 0x00;
+ printk_debug("Testing:\n");
+ reg8 |= (1 << 0); /* set BIOSWE */
+ pci_write_config8(dev, 0xdc, reg8);
+
+ reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
+ (reg8&1)?"rw":"ro");
+ printk_debug("Done.\n");
+#endif
+}
+
+static void lpc_init(struct device *dev)
+{
+ printk_debug("i82801gx: lpc_init\n");
+
+ /* Set the value for PCI command register. */
+ pci_write_config16(dev, PCI_COMMAND, 0x000f);
+
+ /* IO APIC initialization. */
+ i82801gx_enable_apic(dev);
+
+ i82801gx_enable_serial_irqs(dev);
+
+ /* Setup the PIRQ. */
+ i82801gx_pirq_init(dev);
+
+ /* Setup power options. */
+ i82801gx_power_options(dev);
+
+ /* Set the state of the GPIO lines. */
+ //gpio_init(dev);
+
+ /* Initialize the real time clock. */
+ i82801gx_rtc_init(dev);
+
+ /* Initialize ISA DMA. */
+ isa_dma_init();
+
+ /* Initialize the High Precision Event Timers, if present. */
+ enable_hpet(dev);
+
+ setup_i8259();
+
+ i82801gx_lock_smm(dev);
+}
+
+static void i82801gx_lpc_read_resources(device_t dev)
+{
+ struct resource *res;
+
+ /* Get the normal PCI resources of this device. */
+ pci_dev_read_resources(dev);
+
+ /* Add an extra subtractive resource for both memory and I/O. */
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+ res->flags =
+ IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+ res->flags =
+ IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+}
+
+static void i82801gx_lpc_enable_resources(device_t dev)
+{
+ pci_dev_enable_resources(dev);
+ enable_childrens_resources(dev);
+}
+
+static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ printk_debug("Setting LPC bridge subsystem ID\n");
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, 0));
+}
+
+static struct pci_operations pci_ops = {
+ .set_subsystem = set_subsystem,
+};
+
+static struct device_operations device_ops = {
+ .read_resources = i82801gx_lpc_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = i82801gx_lpc_enable_resources,
+ .init = lpc_init,
+ .scan_bus = scan_static_bus,
+ .enable = i82801gx_enable,
+ .ops_pci = &pci_ops,
+};
+
+/* ICH7 / ICH7R */
+static const struct pci_driver ich7_ich7r_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27b8,
+};
+
+/* ICH7M / ICH7U */
+static const struct pci_driver ich7m_ich7u_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27b9,
+};
+
+/* ICH7M DH */
+static const struct pci_driver ich7m_dh_lpc __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27bd,
+};
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_nic.c b/src/southbridge/intel/i82801gx/i82801gx_nic.c
new file mode 100644
index 0000000000..e1ec163ac0
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_nic.c
@@ -0,0 +1,50 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This code should work for all ICH* southbridges with a NIC. */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+
+static void nic_init(struct device *dev)
+{
+ /* Nothing yet */
+}
+
+static struct device_operations nic_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = nic_init,
+ .scan_bus = 0,
+};
+
+/* 82801GB/GR/GDH/GBM/GHM (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH) */
+/* Note: 82801GU (ICH7-U) doesn't have a NIC. */
+/* PCI ID loaded from EEPROM. If EEPROM is 0, 0x27dc is used */
+static const struct pci_driver i82801gb_nic __pci_driver = {
+ .ops = &nic_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801GB_LAN,
+};
+
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_nvs.h b/src/southbridge/intel/i82801gx/i82801gx_nvs.h
new file mode 100644
index 0000000000..3f01f2ace9
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_nvs.h
@@ -0,0 +1,108 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+typedef struct {
+ u16 osys;
+ u8 smif;
+ u8 prm0;
+ u8 prm1;
+ u8 scif;
+ u8 prm2;
+ u8 prm3;
+ u8 lckf;
+ u8 prm4;
+ u8 prm5;
+ u32 p80d;
+ u8 lids;
+ u8 pwrs;
+ u8 dbgs;
+ u8 linxs;
+ u8 rsvd;
+ u8 actt;
+ u8 psvt;
+ u8 tc1v;
+ u8 tc2v;
+ u8 tspv;
+ u8 crtt;
+ u8 dtse;
+ u8 dts1;
+ u8 dts2;
+ u8 rsvd2;
+ u8 bnum;
+ u8 b0sc, b1sc, b2sc;
+ u8 b0ss, b1ss, b2ss;
+ u8 rsvd3[3];
+ u8 apic;
+ u8 mpen;
+ u8 bten;
+ u8 ppcm;
+ u8 pcp0;
+ u8 pcp1;
+ u8 rsvd4[4];
+ u8 natp;
+ u8 cmap;
+ u8 cmbp;
+ u8 lptp;
+ u8 fdcp;
+ u8 rfdv;
+ u8 hotk;
+ u8 rtcf;
+ u8 util;
+ u8 acin;
+ u8 igds;
+ u8 tlst;
+ u8 cadl;
+ u8 padl;
+ u16 cste;
+ u16 pste;
+ u16 nste;
+ u16 sste;
+ u8 ndid;
+ u32 did1;
+ u32 did2;
+ u32 did3;
+ u32 did4;
+ u32 did5;
+ u8 rsvd5[0xb];
+ u8 brtl;
+ u8 odds;
+ u8 alse;
+ u8 alaf;
+ u8 llow;
+ u8 lhih;
+ u8 rsvd6;
+ u8 emae;
+ u16 emap;
+ u16 emal;
+ u8 rsvd7;
+ u8 mefe;
+ u8 igps;
+ u8 rsvd8[2];
+ u8 tpmp;
+ u8 tpme;
+ u8 rsvd9[8];
+ u8 gtf0[7];
+ u8 gtf2[7];
+ u8 idem;
+ u8 idet;
+ u8 dock;
+} global_nvs_t;
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_pci.c b/src/southbridge/intel/i82801gx/i82801gx_pci.c
new file mode 100644
index 0000000000..cf7cad6c3e
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_pci.c
@@ -0,0 +1,141 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+
+static void pci_init(struct device *dev)
+{
+ u16 reg16;
+
+#if 0
+ /* Commented out for now because it will break on some machines. */
+ /* Set latency timer to 32. */
+ pci_write_config16(dev, 0x1b, 0x20);
+#endif
+
+ /* disable parity error response */
+ reg16 = pci_read_config16(dev, 0x3e);
+ reg16 &= ~(1 << 0);
+ pci_write_config16(dev, 0x3e, reg16);
+
+ /* Clear errors in status registers */
+ reg16 = pci_read_config16(dev, 0x06);
+ reg16 |= 0xf900;
+ pci_write_config16(dev, 0x06, reg16);
+
+ reg16 = pci_read_config16(dev, 0x1e);
+ reg16 |= 0xf900;
+ pci_write_config16(dev, 0x1e, reg16);
+}
+
+static void ich_pci_dev_enable_resources(struct device *dev)
+{
+ const struct pci_operations *ops;
+ uint16_t command;
+
+ /* Set the subsystem vendor and device id for mainboard devices */
+ ops = ops_pci(dev);
+ if (dev->on_mainboard && ops && ops->set_subsystem) {
+ printk_debug("%s subsystem <- %02x/%02x\n",
+ dev_path(dev),
+ MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID,
+ MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
+ ops->set_subsystem(dev,
+ MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID,
+ MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
+ }
+
+#if 0
+ /* If we write to PCI_COMMAND, on some systems
+ * this will cause the ROM and APICs not being visible
+ * anymore.
+ */
+ command = pci_read_config16(dev, PCI_COMMAND);
+ command |= dev->command;
+ printk_debug("%s cmd <- %02x\n", dev_path(dev), command);
+ pci_write_config16(dev, PCI_COMMAND, command);
+#endif
+}
+
+static void ich_pci_bus_enable_resources(struct device *dev)
+{
+ uint16_t ctrl;
+ /* enable IO in command register if there is VGA card
+ * connected with (even it does not claim IO resource)
+ */
+ if (dev->link[0].bridge_ctrl & PCI_BRIDGE_CTL_VGA)
+ dev->command |= PCI_COMMAND_IO;
+ ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL);
+ ctrl |= dev->link[0].bridge_ctrl;
+ ctrl |= (PCI_BRIDGE_CTL_PARITY + PCI_BRIDGE_CTL_SERR); /* error check */
+ printk_debug("%s bridge ctrl <- %04x\n", dev_path(dev), ctrl);
+ pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);
+
+ /* This is the reason we need our own pci_bus_enable_resources */
+ ich_pci_dev_enable_resources(dev);
+
+ enable_childrens_resources(dev);
+}
+
+static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+#if 0
+ /* Currently disabled because it causes a "BAR 9" memory resource
+ * conflict:
+ */
+ u32 pci_id;
+
+ printk_debug("Setting PCI bridge subsystem ID\n");
+ pci_id = pci_read_config32(dev, 0);
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, pci_id );
+#endif
+}
+
+static struct pci_operations pci_ops = {
+ .set_subsystem = set_subsystem,
+};
+
+static struct device_operations device_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = ich_pci_bus_enable_resources,
+ .init = pci_init,
+ .scan_bus = pci_scan_bridge,
+ .ops_pci = &pci_ops,
+};
+
+
+/* Desktop */
+static const struct pci_driver i82801g_pci __pci_driver = {
+ .ops = &device_ops,
+ .vendor = 0x8086,
+ .device = 0x244e,
+};
+
+/* Mobile / Ultra Mobile */
+static const struct pci_driver i82801gmu_pci __pci_driver = {
+ .ops = &device_ops,
+ .vendor = 0x8086,
+ .device = 0x2448,
+};
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_pcie.c b/src/southbridge/intel/i82801gx/i82801gx_pcie.c
new file mode 100644
index 0000000000..729c78447c
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_pcie.c
@@ -0,0 +1,126 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+
+static void pci_init(struct device *dev)
+{
+ u16 reg16;
+ u32 reg32;
+
+ printk_debug("Initializing ICH7 PCIe bridge.\n");
+#if 0
+ // When the latency of the PCIe(!) bridge is set to 0x20
+ // all devices on the secondary bus of the PCI(!) bridge
+ // suddenly vanish. If you know why, please explain here.
+
+ /* Set latency timer to 32. */
+ pci_write_config16(dev, 0x1b, 0x20);
+#endif
+
+ /* disable parity error response */
+ reg16 = pci_read_config16(dev, 0x3e);
+ reg16 &= ~(1 << 0);
+ pci_write_config16(dev, 0x3e, reg16);
+
+ /* Clear errors in status registers */
+ reg16 = pci_read_config16(dev, 0x06);
+ reg16 |= 0xf900;
+ pci_write_config16(dev, 0x06, reg16);
+
+ reg16 = pci_read_config16(dev, 0x1e);
+ reg16 |= 0xf900;
+ pci_write_config16(dev, 0x1e, reg16);
+
+ reg32 = pci_read_config32(dev, 0x20);
+ printk_debug(" MBL = 0x%08x\n", reg32);
+ reg32 = pci_read_config32(dev, 0x24);
+ printk_debug(" PMBL = 0x%08x\n", reg32);
+ reg32 = pci_read_config32(dev, 0x28);
+ printk_debug(" PMBU32 = 0x%08x\n", reg32);
+ reg32 = pci_read_config32(dev, 0x2c);
+ printk_debug(" PMLU32 = 0x%08x\n", reg32);
+}
+
+static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ u32 pci_id;
+
+ printk_debug("Setting PCIe bridge subsystem ID.\n");
+ pci_id = pci_read_config32(dev, 0);
+ pci_write_config32(dev, 0x94, pci_id );
+}
+
+static struct pci_operations pci_ops = {
+ .set_subsystem = set_subsystem,
+};
+
+static struct device_operations device_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pci_init,
+ .scan_bus = pci_scan_bridge,
+ .ops_pci = &pci_ops,
+};
+
+static const struct pci_driver i82801gx_pcie_port1 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = 0x8086,
+ .device = 0x27d0,
+};
+
+static const struct pci_driver i82801gx_pcie_port2 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = 0x8086,
+ .device = 0x27d2,
+};
+
+static const struct pci_driver i82801gx_pcie_port3 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = 0x8086,
+ .device = 0x27d4,
+};
+
+static const struct pci_driver i82801gx_pcie_port4 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = 0x8086,
+ .device = 0x27d6,
+};
+
+static const struct pci_driver i82801gx_pcie_port5 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = 0x8086,
+ .device = 0x27e0,
+};
+
+static const struct pci_driver i82801gx_pcie_port6 __pci_driver = {
+ .ops = &device_ops,
+ .vendor = 0x8086,
+ .device = 0x27e2,
+};
+
+
+
+
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_reset.c b/src/southbridge/intel/i82801gx/i82801gx_reset.c
new file mode 100644
index 0000000000..5ebb75607f
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_reset.c
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+
+void hard_reset(void)
+{
+ /* Try rebooting through port 0xcf9. */
+ outb((1 << 2) | (1 << 1), 0xcf9);
+}
diff --git a/src/southbridge/intel/i82801gx/i82801gx_sata.c b/src/southbridge/intel/i82801gx/i82801gx_sata.c
new file mode 100644
index 0000000000..a25125110b
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_sata.c
@@ -0,0 +1,190 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "i82801gx.h"
+
+typedef struct southbridge_intel_i82801gx_config config_t;
+
+static void sata_init(struct device *dev)
+{
+ u32 reg32;
+ /* Get the chip configuration */
+ config_t *config = dev->chip_info;
+
+ printk_debug("i82801gx_sata: initializing...\n");
+ /* SATA configuration */
+
+ /* Enable BARs */
+ pci_write_config16(dev, 0x04, 0x0007);
+
+ if (config->ide_legacy_combined) {
+ pci_write_config8(dev, 0x09, 0x80);
+
+ /* Set timings */
+ pci_write_config16(dev, IDE_TIM_PRI, 0x8000);
+ pci_write_config16(dev, IDE_TIM_SEC, 0xa307);
+
+ /* Sync DMA */
+ pci_write_config16(dev, 0x48, 0x0004);
+ pci_write_config16(dev, 0x4a, 0x0200);
+
+ /* Combine IDE - SATA configuration */
+ pci_write_config8(dev, 0x90, 0x02);
+
+ /* Port 0 & 1 enable */
+ pci_write_config8(dev, 0x92, 0x0f);
+
+ /* SATA Initialization register */
+ pci_write_config32(dev, 0x94, 0x40000180);
+ } else if(config->sata_ahci) {
+ /* Allow both Legacy and Native mode */
+ pci_write_config8(dev, 0x09, 0x8f);
+
+ /* Set Interrupt Line */
+ /* Interrupt Pin is set by D31IP.PIP */
+ pci_write_config8(dev, INTR_LN, 0x0a);
+
+ /* Set timings */
+ pci_write_config16(dev, IDE_TIM_PRI, 0xa307);
+ pci_write_config16(dev, IDE_TIM_SEC, 0x8000);
+
+ /* Sync DMA */
+ pci_write_config16(dev, 0x48, 0x0001);
+ pci_write_config16(dev, 0x4a, 0x0001);
+
+ /* Set IDE I/O Configuration */
+ reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+ pci_write_config32(dev, IDE_CONFIG, reg32);
+
+ /* Set Sata Controller Mode. */
+ pci_write_config8(dev, 0x90, 0xc0); // WTF - Reserved?
+
+ /* Port 0 & 1 enable */
+ pci_write_config8(dev, 0x92, 0x0f);
+
+ /* SATA Initialization register */
+ pci_write_config32(dev, 0x94, 0x1a000180);
+ } else {
+ /* Native mode capable on both primary and secondary (0xa)
+ * or'ed with enabled (0x50) = 0xf
+ */
+ pci_write_config8(dev, 0x09, 0x8f);
+
+ /* Set Interrupt Line */
+ /* Interrupt Pin is set by D31IP.PIP */
+ pci_write_config8(dev, INTR_LN, 0xff);
+
+ /* Set timings */
+ pci_write_config16(dev, IDE_TIM_PRI, 0xa307);
+ pci_write_config16(dev, IDE_TIM_SEC, 0xe303);
+
+ /* Sync DMA */
+ pci_write_config16(dev, 0x48, 0x0005);
+ pci_write_config16(dev, 0x4a, 0x0201);
+
+ /* Set IDE I/O Configuration */
+ reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+ pci_write_config32(dev, IDE_CONFIG, reg32);
+
+ /* Set Sata Controller Mode. */
+ pci_write_config8(dev, 0x90, 0x02);
+
+ /* Port 0 & 1 enable XXX */
+ pci_write_config8(dev, 0x92, 0x15);
+
+ /* SATA Initialization register */
+ pci_write_config32(dev, 0x94, 0x1a000180);
+ }
+
+ /* All configurations need this SATA initialization sequence */
+ pci_write_config8(dev, 0xa0, 0x40);
+ pci_write_config8(dev, 0xa6, 0x22);
+ pci_write_config8(dev, 0xa0, 0x78);
+ pci_write_config8(dev, 0xa6, 0x22);
+ pci_write_config8(dev, 0xa0, 0x88);
+ reg32 = pci_read_config32(dev, 0xa4);
+ reg32 &= 0xc0c0c0c0;
+ reg32 |= 0x1b1b1212;
+ pci_write_config32(dev, 0xa4, reg32);
+ pci_write_config8(dev, 0xa0, 0x8c);
+ reg32 = pci_read_config32(dev, 0xa4);
+ reg32 &= 0xc0c0ff00;
+ reg32 |= 0x121200aa;
+ pci_write_config32(dev, 0xa4, reg32);
+ pci_write_config8(dev, 0xa0, 0x00);
+}
+
+static struct device_operations sata_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = sata_init,
+ .scan_bus = 0,
+ .enable = i82801gx_enable,
+};
+
+/* Desktop Non-AHCI and Non-RAID Mode */
+static const struct pci_driver i82801gx_sata_normal_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27c0,
+};
+
+/* NOTE: Any of the below are not properly supported yet */
+
+/* Desktop AHCI Mode */
+static const struct pci_driver i82801gx_sata_ahci_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27c1,
+};
+
+/* Desktop RAID mode */
+static const struct pci_driver i82801gx_sata_raid_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27c3,
+};
+
+/* Mobile Non-AHCI and Non-RAID Mode */
+static const struct pci_driver i82801gx_sata_mobile_normal_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27c4,
+};
+
+/* Mobile AHCI Mode */
+static const struct pci_driver i82801gx_sata_mobile_ahci_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27c5,
+};
+
+/* ICH7M DH Raid Mode */
+static const struct pci_driver i82801gx_sata_ich7dh_raid_driver __pci_driver = {
+ .ops = &sata_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27c6,
+};
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_smbus.c b/src/southbridge/intel/i82801gx/i82801gx_smbus.c
new file mode 100644
index 0000000000..1f609f0c29
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_smbus.c
@@ -0,0 +1,59 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <smbus.h>
+#include <pci.h>
+#include <arch/io.h>
+#include "i82801gx.h"
+#include "i82801_smbus.h"
+
+static int smbus_read_byte(struct bus *bus, device_t dev, u8 address)
+{
+ u16 device;
+ struct resource *res;
+
+ device = dev->path.u.i2c.device;
+ res = find_resource(bus->dev, 0x20);
+
+ return do_smbus_read_byte(res->base, device, address);
+}
+
+static struct smbus_bus_operations lops_smbus_bus = {
+ .read_byte = smbus_read_byte,
+};
+
+static struct device_operations smbus_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = 0,
+ .scan_bus = scan_static_bus,
+ .enable = i82801gx_enable,
+ .ops_smbus_bus = &lops_smbus_bus,
+};
+
+/* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */
+static const struct pci_driver i82801gx_smbus __pci_driver = {
+ .ops = &smbus_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801GB_SMB,
+};
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_smbus.h b/src/southbridge/intel/i82801gx/i82801gx_smbus.h
new file mode 100644
index 0000000000..13272cb552
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_smbus.h
@@ -0,0 +1,187 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/smbus_def.h>
+
+static void smbus_delay(void)
+{
+ inb(0x80);
+}
+
+static int smbus_wait_until_ready(void)
+{
+ unsigned loops = SMBUS_TIMEOUT;
+ unsigned char byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ } while (byte & 1);
+ return loops ? 0 : -1;
+}
+
+static int smbus_wait_until_done(void)
+{
+ unsigned loops = SMBUS_TIMEOUT;
+ unsigned char byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ } while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0);
+ return loops ? 0 : -1;
+}
+
+static int smbus_wait_until_blk_done(void)
+{
+ unsigned loops = SMBUS_TIMEOUT;
+ unsigned char byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ } while ((byte & (1 << 7)) == 0);
+ return loops ? 0 : -1;
+}
+
+static int do_smbus_read_byte(unsigned device, unsigned address)
+{
+ unsigned char global_status_register;
+ unsigned char byte;
+
+ if (smbus_wait_until_ready() < 0) {
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+ }
+ /* Setup transaction */
+ /* Disable interrupts */
+ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+ /* Set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD);
+ /* Set the command/address... */
+ outb(address & 0xff, SMBUS_IO_BASE + SMBHSTCMD);
+ /* Set up for a byte data read */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x2 << 2),
+ (SMBUS_IO_BASE + SMBHSTCTL));
+ /* Clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* Clear the data byte... */
+ outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+
+ /* Start the command */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40),
+ SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* Poll for transaction completion */
+ if (smbus_wait_until_done() < 0) {
+ return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+ }
+
+ global_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* Ignore the "In Use" status... */
+ global_status_register &= ~(3 << 5);
+
+ /* Read results of transaction */
+ byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+ if (global_status_register != (1 << 1)) {
+ return SMBUS_ERROR;
+ }
+ return byte;
+}
+
+/* This function is neither used nor tested by me (Corey Osgood), the author
+(Yinghai) probably tested/used it on i82801er */
+static int do_smbus_write_block(unsigned device, unsigned length, unsigned cmd,
+ unsigned data1, unsigned data2)
+{
+ unsigned char byte;
+ unsigned char stat;
+ int i;
+
+#if CONFIG_USE_PRINTK_IN_CAR
+ printk_err("Untested smbus_write_block called\r\n");
+#else
+ print_err("Untested smbus_write_block called\r\n");
+#endif
+
+ /* Clear the PM timeout flags, SECOND_TO_STS */
+ outw(inw(0x0400 + 0x66), 0x0400 + 0x66);
+
+ if (smbus_wait_until_ready() < 0) {
+ return -2;
+ }
+
+ /* Setup transaction */
+ /* Obtain ownership */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+ for (stat = 0; (stat & 0x40) == 0;) {
+ stat = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }
+ /* Clear the done bit */
+ outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT);
+ /* Disable interrupts */
+ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* Set the device I'm talking too */
+ outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD);
+
+ /* Set the command address */
+ outb(cmd & 0xff, SMBUS_IO_BASE + SMBHSTCMD);
+
+ /* Set the block length */
+ outb(length & 0xff, SMBUS_IO_BASE + SMBHSTDAT0);
+
+ /* Try sending out the first byte of data here */
+ byte = (data1 >> (0)) & 0x0ff;
+ outb(byte, SMBUS_IO_BASE + SMBBLKDAT);
+ /* Issue a block write command */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x5 << 2) | 0x40,
+ SMBUS_IO_BASE + SMBHSTCTL);
+
+ for (i = 0; i < length; i++) {
+
+ /* Poll for transaction completion */
+ if (smbus_wait_until_blk_done() < 0) {
+ return -3;
+ }
+
+ /* Load the next byte */
+ if (i > 3)
+ byte = (data2 >> (i % 4)) & 0x0ff;
+ else
+ byte = (data1 >> (i)) & 0x0ff;
+ outb(byte, SMBUS_IO_BASE + SMBBLKDAT);
+
+ /* Clear the done bit */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT),
+ SMBUS_IO_BASE + SMBHSTSTAT);
+ }
+
+#if CONFIG_USE_PRINTK_IN_CAR
+ printk_debug("SMBUS Block complete\r\n");
+#else
+ print_debug("SMBUS Block complete\r\n");
+#endif
+ return 0;
+}
diff --git a/src/southbridge/intel/i82801gx/i82801gx_smi.c b/src/southbridge/intel/i82801gx/i82801gx_smi.c
new file mode 100644
index 0000000000..8aae3b14d7
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_smi.c
@@ -0,0 +1,335 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/smm.h>
+#include <string.h>
+#include "chip.h"
+
+// Future TODO: Move to i82801gx directory
+#include "../../../northbridge/intel/i945/ich7.h"
+
+extern unsigned char smm[];
+extern unsigned int smm_len;
+
+/* I945 */
+#define SMRAM 0x9d
+#define D_OPEN (1 << 6)
+#define D_CLS (1 << 5)
+#define D_LCK (1 << 4)
+#define G_SMRAME (1 << 3)
+#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0))
+
+/* ICH7 */
+#define PM1_STS 0x00
+#define PM1_EN 0x02
+#define PM1_CNT 0x04
+#define PM1_TMR 0x08
+#define PROC_CNT 0x10
+#define LV2 0x14
+#define LV3 0x15
+#define LV4 0x16
+#define PM2_CNT 0x20 // mobile only
+#define GPE0_STS 0x28
+#define GPE0_EN 0x2c
+#define SMI_EN 0x30
+#define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology
+#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
+#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic
+#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS
+#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al)
+#define MCSMI_EN (1 << 11) // Trap microcontroller range access
+#define BIOS_RLS (1 << 7) // asserts SCI on bit set
+#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set
+#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI#
+#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI#
+#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic
+#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit
+#define EOS (1 << 1) // End of SMI (deassert SMI#)
+#define GBL_SMI_EN (1 << 0) // SMI# generation at all?
+#define SMI_STS 0x34
+#define ALT_GP_SMI_EN 0x38
+#define ALT_GP_SMI_STS 0x3a
+#define GPE_CNTL 0x42
+#define DEVACT_STS 0x44
+#define SS_CNT 0x50
+#define C3_RES 0x54
+
+/* While we read PMBASE dynamically in case it changed, let's
+ * initialize it with a sane value
+ */
+static u16 pmbase = DEFAULT_PMBASE;
+
+/**
+ * @brief read and clear PM1_STS
+ * @return PM1_STS register
+ */
+static u16 reset_pm1_status(void)
+{
+ u16 reg16;
+
+ reg16 = inw(pmbase + PM1_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outw(reg16, pmbase + PM1_STS);
+
+ return reg16;
+}
+
+static void dump_pm1_status(u16 pm1_sts)
+{
+ printk_debug("PM1_STS: ");
+ if (pm1_sts & (1 << 15)) printk_debug("WAK ");
+ if (pm1_sts & (1 << 14)) printk_debug("PCIEXPWAK ");
+ if (pm1_sts & (1 << 11)) printk_debug("PRBTNOR ");
+ if (pm1_sts & (1 << 10)) printk_debug("RTC ");
+ if (pm1_sts & (1 << 8)) printk_debug("PWRBTN ");
+ if (pm1_sts & (1 << 5)) printk_debug("GBL ");
+ if (pm1_sts & (1 << 4)) printk_debug("BM ");
+ if (pm1_sts & (1 << 0)) printk_debug("TMROF ");
+ printk_debug("\n");
+}
+
+/**
+ * @brief read and clear SMI_STS
+ * @return SMI_STS register
+ */
+static u32 reset_smi_status(void)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + SMI_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32, pmbase + SMI_STS);
+
+ return reg32;
+}
+
+static void dump_smi_status(u32 smi_sts)
+{
+ printk_debug("SMI_STS: ");
+ if (smi_sts & (1 << 26)) printk_debug("SPI ");
+ if (smi_sts & (1 << 25)) printk_debug("EL_SMI ");
+ if (smi_sts & (1 << 21)) printk_debug("MONITOR ");
+ if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI ");
+ if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 ");
+ if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 ");
+ if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI ");
+ if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI ");
+ if (smi_sts & (1 << 14)) printk_debug("PERIODIC ");
+ if (smi_sts & (1 << 13)) printk_debug("TCO ");
+ if (smi_sts & (1 << 12)) printk_debug("DEVMON ");
+ if (smi_sts & (1 << 11)) printk_debug("MCSMI ");
+ if (smi_sts & (1 << 10)) printk_debug("GPI ");
+ if (smi_sts & (1 << 9)) printk_debug("GPE0 ");
+ if (smi_sts & (1 << 8)) printk_debug("PM1 ");
+ if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR ");
+ if (smi_sts & (1 << 5)) printk_debug("APM ");
+ if (smi_sts & (1 << 4)) printk_debug("SLP_SMI ");
+ if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB ");
+ if (smi_sts & (1 << 2)) printk_debug("BIOS ");
+ printk_debug("\n");
+}
+
+
+/**
+ * @brief read and clear GPE0_STS
+ * @return GPE0_STS register
+ */
+static u32 reset_gpe0_status(void)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + GPE0_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32, pmbase + GPE0_STS);
+
+ return reg32;
+}
+
+static void dump_gpe0_status(u32 gpe0_sts)
+{
+ int i;
+ printk_debug("GPE0_STS: ");
+ for (i=31; i<= 16; i--) {
+ if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16));
+ }
+ if (gpe0_sts & (1 << 14)) printk_debug("USB4 ");
+ if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 ");
+ if (gpe0_sts & (1 << 12)) printk_debug("USB3 ");
+ if (gpe0_sts & (1 << 11)) printk_debug("PME ");
+ if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW ");
+ if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP ");
+ if (gpe0_sts & (1 << 8)) printk_debug("RI ");
+ if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK ");
+ if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI ");
+ if (gpe0_sts & (1 << 5)) printk_debug("AC97 ");
+ if (gpe0_sts & (1 << 4)) printk_debug("USB2 ");
+ if (gpe0_sts & (1 << 3)) printk_debug("USB1 ");
+ if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG ");
+ if (gpe0_sts & (1 << 0)) printk_debug("THRM ");
+ printk_debug("\n");
+}
+
+/**
+ * @brief read and clear TCOx_STS
+ * @return TCOx_STS registers
+ */
+static u32 reset_tco_status(void)
+{
+ u32 tcobase = pmbase + 0x60;
+ u32 reg32;
+
+ reg32 = inl(tcobase + 0x04);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
+ if (reg32 & (1 << 18))
+ outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
+
+ return reg32;
+}
+
+
+static void dump_tco_status(u32 tco_sts)
+{
+ printk_debug("TCO_STS: ");
+ if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV ");
+ if (tco_sts & (1 << 18)) printk_debug("BOOT ");
+ if (tco_sts & (1 << 17)) printk_debug("SECOND_TO ");
+ if (tco_sts & (1 << 16)) printk_debug("INTRD_DET ");
+ if (tco_sts & (1 << 12)) printk_debug("DMISERR ");
+ if (tco_sts & (1 << 10)) printk_debug("DMISMI ");
+ if (tco_sts & (1 << 9)) printk_debug("DMISCI ");
+ if (tco_sts & (1 << 8)) printk_debug("BIOSWR ");
+ if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY ");
+ if (tco_sts & (1 << 3)) printk_debug("TIMEOUT ");
+ if (tco_sts & (1 << 2)) printk_debug("TCO_INT ");
+ if (tco_sts & (1 << 1)) printk_debug("SW_TCO ");
+ if (tco_sts & (1 << 0)) printk_debug("NMI2SMI ");
+ printk_debug("\n");
+}
+
+
+
+/**
+ * @brief Set the EOS bit
+ */
+static void smi_set_eos(void)
+{
+ u8 reg8;
+
+ reg8 = inb(pmbase + SMI_EN);
+ reg8 |= EOS;
+ outb(reg8, pmbase + SMI_EN);
+}
+
+extern uint8_t smm_relocation_start, smm_relocation_end;
+
+void smm_relocate(void)
+{
+ u32 smi_en;
+
+ printk_debug("Initializing SMM handler...");
+
+ pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc;
+ printk_spew(" ... pmbase = 0x%04x\n", pmbase);
+
+ smi_en = inl(pmbase + SMI_EN);
+ if (smi_en & APMC_EN) {
+ printk_info("SMI# handler already enabled?\n");
+ return;
+ }
+
+ /* copy the SMM relocation code */
+ memcpy((void *)0x38000, &smm_relocation_start,
+ &smm_relocation_end - &smm_relocation_start);
+
+ printk_debug("\n");
+ dump_smi_status(reset_smi_status());
+ dump_pm1_status(reset_pm1_status());
+ dump_gpe0_status(reset_gpe0_status());
+ dump_tco_status(reset_tco_status());
+
+ /* Enable SMI generation:
+ * - on TCO events
+ * - on APMC writes (io 0xb2)
+ * - on writes to SLP_EN (sleep states)
+ * - on writes to GBL_RLS (bios commands)
+ * No SMIs:
+ * - on microcontroller writes (io 0x62/0x66)
+ */
+ outl(smi_en | (TCO_EN | APMC_EN | SLP_SMI_EN | BIOS_EN |
+ EOS | GBL_SMI_EN), pmbase + SMI_EN);
+
+ /**
+ * There are several methods of raising a controlled SMI# via
+ * software, among them:
+ * - Writes to io 0xb2 (APMC)
+ * - Writes to the Local Apic ICR with Delivery mode SMI.
+ *
+ * Using the local apic is a bit more tricky. According to
+ * AMD Family 11 Processor BKDG no destination shorthand must be
+ * used.
+ * The whole SMM initialization is quite a bit hardware specific, so
+ * I'm not too worried about the better of the methods at the moment
+ */
+
+ /* raise an SMI interrupt */
+ printk_spew(" ... raise SMI#\n");
+ outb(0x00, 0xb2);
+}
+
+void smm_install(void)
+{
+ /* enable the SMM memory window */
+ pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
+ D_OPEN | G_SMRAME | C_BASE_SEG);
+
+ /* copy the real SMM handler */
+ memcpy((void *)0xa0000, smm, smm_len);
+ wbinvd();
+
+ /* close the SMM memory window and enable normal SMM */
+ pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
+ G_SMRAME | C_BASE_SEG);
+}
+
+void smm_init(void)
+{
+ smm_relocate();
+ smm_install();
+}
+
+void smm_lock(void)
+{
+ /* LOCK the SMM memory window and enable normal SMM.
+ * After running this function, only a full reset can
+ * make the SMM registers writable again.
+ */
+ printk_debug("Locking SMM.\n");
+ pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
+ D_LCK | G_SMRAME | C_BASE_SEG);
+}
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb.c b/src/southbridge/intel/i82801gx/i82801gx_usb.c
new file mode 100644
index 0000000000..d8024777f7
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_usb.c
@@ -0,0 +1,79 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "i82801gx.h"
+
+static void usb_init(struct device *dev)
+{
+ u32 reg32;
+ u8 reg8;
+
+ /* USB Specification says the device must be Bus Master */
+ printk_debug("UHCI: Setting up controller.. ");
+
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
+
+ reg8 = pci_read_config8(dev, 0xca);
+ reg8 |= (1 << 0);
+ pci_write_config8(dev, 0xca, reg8);
+
+ printk_debug("done.\n");
+}
+
+static struct device_operations usb_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb_init,
+ .scan_bus = 0,
+ .enable = i82801gx_enable,
+};
+
+/* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */
+static const struct pci_driver i82801gb_usb1 __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801GB_USB1,
+};
+
+static const struct pci_driver i82801gb_usb2 __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801GB_USB2,
+};
+
+static const struct pci_driver i82801gb_usb3 __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801GB_USB3,
+};
+
+static const struct pci_driver i82801gb_usb4 __pci_driver = {
+ .ops = &usb_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82801GB_USB4,
+};
+
+
diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c
new file mode 100644
index 0000000000..3d581abb59
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c
@@ -0,0 +1,84 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "i82801gx.h"
+
+static void usb_ehci_init(struct device *dev)
+{
+ u32 reg32;
+
+ printk_debug("EHCI: Setting up controller.. ");
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
+
+ reg32 = pci_read_config32(dev, 0xdc);
+ reg32 |= (1 << 31) | (1 << 27);
+ pci_write_config32(dev, 0xdc, reg32);
+
+ reg32 = pci_read_config32(dev, 0xfc);
+ reg32 &= ~(3 << 2);
+ reg32 |= (2 << 2) | (1 << 29) | (1 << 17);
+ pci_write_config32(dev, 0xfc, reg32);
+
+ printk_debug("done.\n");
+}
+
+static void usb_ehci_set_subsystem(device_t dev, unsigned vendor,
+ unsigned device)
+{
+ u8 access_cntl;
+
+ access_cntl = pci_read_config8(dev, 0x80);
+
+ /* Enable writes to protected registers. */
+ pci_write_config8(dev, 0x80, access_cntl | 1);
+
+ /* Write the subsystem vendor and device ID. */
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+
+ /* Restore protection. */
+ pci_write_config8(dev, 0x80, access_cntl);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = &usb_ehci_set_subsystem,
+};
+
+static struct device_operations usb_ehci_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb_ehci_init,
+ .scan_bus = 0,
+ .enable = i82801gx_enable,
+ .ops_pci = &lops_pci,
+};
+
+/* 82801Gx */
+static const struct pci_driver i82801ex_usb_ehci __pci_driver = {
+ .ops = &usb_ehci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x27cc,
+};
diff --git a/src/southbridge/intel/i82801gx/i82801gx_watchdog.c b/src/southbridge/intel/i82801gx/i82801gx_watchdog.c
new file mode 100644
index 0000000000..474a2d7cb3
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/i82801gx_watchdog.c
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pci.h>
+
+void watchdog_off(void)
+{
+ device_t dev;
+ unsigned long value, base;
+
+ /* Turn off the ICH7 watchdog. */
+ dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0));
+
+ /* Enable I/O space. */
+ value = pci_read_config16(dev, 0x04);
+ value |= (1 << 10);
+ pci_write_config16(dev, 0x04, value);
+
+ /* Get TCO base. */
+ base = (pci_read_config32(dev, 0x40) & 0x0fffe) + 0x60;
+
+ /* Disable the watchdog timer. */
+ value = inw(base + 0x08);
+ value |= 1 << 11;
+ outw(value, base + 0x08);
+
+ /* Clear TCO timeout status. */
+ outw(0x0008, base + 0x04);
+ outw(0x0002, base + 0x06);
+
+ printk_debug("ICH7 watchdog disabled\r\n");
+}
diff --git a/src/southbridge/intel/i82801gx/smihandler.c b/src/southbridge/intel/i82801gx/smihandler.c
new file mode 100644
index 0000000000..8e5569ad2f
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/smihandler.c
@@ -0,0 +1,551 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/smm.h>
+#include "chip.h"
+
+// Future TODO: Move to i82801gx directory
+#include "../../../northbridge/intel/i945/ich7.h"
+
+#define DEBUG_SMI
+
+#define ACPI_DISABLE 0x1e
+#define ACPI_ENABLE 0xe1
+
+/* I945 */
+#define SMRAM 0x9d
+#define D_OPEN (1 << 6)
+#define D_CLS (1 << 5)
+#define D_LCK (1 << 4)
+#define G_SMRANE (1 << 3)
+#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0))
+
+/* ICH7 */
+#define PM1_STS 0x00
+#define PM1_EN 0x02
+#define PM1_CNT 0x04
+#define PM1_TMR 0x08
+#define PROC_CNT 0x10
+#define LV2 0x14
+#define LV3 0x15
+#define LV4 0x16
+#define PM2_CNT 0x20 // mobile only
+#define GPE0_STS 0x28
+#define GPE0_EN 0x2c
+#define SMI_EN 0x30
+#define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology
+#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
+#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic
+#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS
+#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al)
+#define MCSMI_EN (1 << 11) // Trap microcontroller range access
+#define BIOS_RLS (1 << 7) // asserts SCI on bit set
+#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set
+#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI#
+#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI#
+#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic
+#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit
+#define EOS (1 << 1) // End of SMI (deassert SMI#)
+#define GBL_SMI_EN (1 << 0) // SMI# generation at all?
+#define SMI_STS 0x34
+#define ALT_GP_SMI_EN 0x38
+#define ALT_GP_SMI_STS 0x3a
+#define GPE_CNTL 0x42
+#define DEVACT_STS 0x44
+#define SS_CNT 0x50
+#define C3_RES 0x54
+
+#include "i82801gx_nvs.h"
+
+/* While we read PMBASE dynamically in case it changed, let's
+ * initialize it with a sane value
+ */
+static u16 pmbase = DEFAULT_PMBASE;
+
+typedef enum { SMI_LOCKED, SMI_UNLOCKED } smi_semaphore;
+
+/* SMI multiprocessing semaphore */
+static volatile smi_semaphore smi_handler_status = SMI_UNLOCKED;
+
+static int smi_obtain_lock(void)
+{
+ u8 ret = SMI_LOCKED;
+
+ asm volatile (
+ "movb %2, %%al\n"
+ "xchgb %%al, %1\n"
+ "movb %%al, %0\n"
+ : "=g" (ret), "=m" (smi_handler_status)
+ : "g" (SMI_LOCKED)
+ : "eax"
+ );
+
+ return (ret == SMI_UNLOCKED);
+}
+
+static void smi_release_lock(void)
+{
+ asm volatile (
+ "movb %1, %%al\n"
+ "xchgb %%al, %0\n"
+ : "=m" (smi_handler_status)
+ : "g" (SMI_UNLOCKED)
+ : "eax"
+ );
+}
+
+#define LAPIC_ID 0xfee00020
+static inline __attribute__((always_inline)) unsigned long nodeid(void)
+{
+ return (*((volatile unsigned long *)(LAPIC_ID)) >> 24);
+}
+
+
+/**
+ * @brief read and clear PM1_STS
+ * @return PM1_STS register
+ */
+static u16 reset_pm1_status(void)
+{
+ u16 reg16;
+
+ reg16 = inw(pmbase + PM1_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outw(reg16, pmbase + PM1_STS);
+
+ return reg16;
+}
+
+static void dump_pm1_status(u16 pm1_sts)
+{
+ printk_debug("PM1_STS: ");
+ if (pm1_sts & (1 << 15)) printk_debug("WAK ");
+ if (pm1_sts & (1 << 14)) printk_debug("PCIEXPWAK ");
+ if (pm1_sts & (1 << 11)) printk_debug("PRBTNOR ");
+ if (pm1_sts & (1 << 10)) printk_debug("RTC ");
+ if (pm1_sts & (1 << 8)) printk_debug("PWRBTN ");
+ if (pm1_sts & (1 << 5)) printk_debug("GBL ");
+ if (pm1_sts & (1 << 4)) printk_debug("BM ");
+ if (pm1_sts & (1 << 0)) printk_debug("TMROF ");
+ printk_debug("\n");
+}
+
+/**
+ * @brief read and clear SMI_STS
+ * @return SMI_STS register
+ */
+static u32 reset_smi_status(void)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + SMI_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32, pmbase + SMI_STS);
+
+ return reg32;
+}
+
+static void dump_smi_status(u32 smi_sts)
+{
+ printk_debug("SMI_STS: ");
+ if (smi_sts & (1 << 26)) printk_debug("SPI ");
+ if (smi_sts & (1 << 25)) printk_debug("EL_SMI ");
+ if (smi_sts & (1 << 21)) printk_debug("MONITOR ");
+ if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI ");
+ if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 ");
+ if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 ");
+ if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI ");
+ if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI ");
+ if (smi_sts & (1 << 14)) printk_debug("PERIODIC ");
+ if (smi_sts & (1 << 13)) printk_debug("TCO ");
+ if (smi_sts & (1 << 12)) printk_debug("DEVMON ");
+ if (smi_sts & (1 << 11)) printk_debug("MCSMI ");
+ if (smi_sts & (1 << 10)) printk_debug("GPI ");
+ if (smi_sts & (1 << 9)) printk_debug("GPE0 ");
+ if (smi_sts & (1 << 8)) printk_debug("PM1 ");
+ if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR ");
+ if (smi_sts & (1 << 5)) printk_debug("APM ");
+ if (smi_sts & (1 << 4)) printk_debug("SLP_SMI ");
+ if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB ");
+ if (smi_sts & (1 << 2)) printk_debug("BIOS ");
+ printk_debug("\n");
+}
+
+
+/**
+ * @brief read and clear GPE0_STS
+ * @return GPE0_STS register
+ */
+static u32 reset_gpe0_status(void)
+{
+ u32 reg32;
+
+ reg32 = inl(pmbase + GPE0_STS);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32, pmbase + GPE0_STS);
+
+ return reg32;
+}
+
+static void dump_gpe0_status(u32 gpe0_sts)
+{
+ int i;
+ printk_debug("GPE0_STS: ");
+ for (i=31; i<= 16; i--) {
+ if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16));
+ }
+ if (gpe0_sts & (1 << 14)) printk_debug("USB4 ");
+ if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 ");
+ if (gpe0_sts & (1 << 12)) printk_debug("USB3 ");
+ if (gpe0_sts & (1 << 11)) printk_debug("PME ");
+ if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW ");
+ if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP ");
+ if (gpe0_sts & (1 << 8)) printk_debug("RI ");
+ if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK ");
+ if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI ");
+ if (gpe0_sts & (1 << 5)) printk_debug("AC97 ");
+ if (gpe0_sts & (1 << 4)) printk_debug("USB2 ");
+ if (gpe0_sts & (1 << 3)) printk_debug("USB1 ");
+ if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG ");
+ if (gpe0_sts & (1 << 0)) printk_debug("THRM ");
+ printk_debug("\n");
+}
+
+
+/**
+ * @brief read and clear TCOx_STS
+ * @return TCOx_STS registers
+ */
+static u32 reset_tco_status(void)
+{
+ u32 tcobase = pmbase + 0x60;
+ u32 reg32;
+
+ reg32 = inl(tcobase + 0x04);
+ /* set status bits are cleared by writing 1 to them */
+ outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
+ if (reg32 & (1 << 18))
+ outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
+
+ return reg32;
+}
+
+
+static void dump_tco_status(u32 tco_sts)
+{
+ printk_debug("TCO_STS: ");
+ if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV ");
+ if (tco_sts & (1 << 18)) printk_debug("BOOT ");
+ if (tco_sts & (1 << 17)) printk_debug("SECOND_TO ");
+ if (tco_sts & (1 << 16)) printk_debug("INTRD_DET ");
+ if (tco_sts & (1 << 12)) printk_debug("DMISERR ");
+ if (tco_sts & (1 << 10)) printk_debug("DMISMI ");
+ if (tco_sts & (1 << 9)) printk_debug("DMISCI ");
+ if (tco_sts & (1 << 8)) printk_debug("BIOSWR ");
+ if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY ");
+ if (tco_sts & (1 << 3)) printk_debug("TIMEOUT ");
+ if (tco_sts & (1 << 2)) printk_debug("TCO_INT ");
+ if (tco_sts & (1 << 1)) printk_debug("SW_TCO ");
+ if (tco_sts & (1 << 0)) printk_debug("NMI2SMI ");
+ printk_debug("\n");
+}
+
+
+/* ********************* smi_util ************************* */
+
+/* Data */
+#define UART_RBR 0x00
+#define UART_TBR 0x00
+
+/* Control */
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/* Status */
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+
+static int uart_can_tx_byte(void)
+{
+ return inb(TTYS0_BASE + UART_LSR) & 0x20;
+}
+
+static void uart_wait_to_tx_byte(void)
+{
+ while(!uart_can_tx_byte())
+ ;
+}
+
+static void uart_wait_until_sent(void)
+{
+ while(!(inb(TTYS0_BASE + UART_LSR) & 0x40))
+ ;
+}
+
+static void uart_tx_byte(unsigned char data)
+{
+ uart_wait_to_tx_byte();
+ outb(data, TTYS0_BASE + UART_TBR);
+ /* Make certain the data clears the fifos */
+ uart_wait_until_sent();
+}
+
+void console_tx_flush(void)
+{
+ uart_wait_to_tx_byte();
+}
+
+void console_tx_byte(unsigned char byte)
+{
+ if (byte == '\n')
+ uart_tx_byte('\r');
+ uart_tx_byte(byte);
+}
+
+/* We are using PCIe accesses for now
+ * 1. the chipset can do it
+ * 2. we don't need to worry about how we leave 0xcf8/0xcfc behind
+ */
+#include "../../../northbridge/intel/i945/pcie_config.c"
+
+/* ********************* smi_util ************************* */
+
+
+void io_trap_handler(int smif)
+{
+ u8 reg8;
+ global_nvs_t *gnvs = (global_nvs_t *)0xc00;
+
+ printk_debug("SMI function trap 0x%x: ", smif);
+
+
+ switch (smif) {
+ case 0x32:
+ printk_debug("OS Init\n");
+ break;
+ case 0xd6:
+ printk_debug("Get Brightness\n");
+ outb(0x17, 0x66);
+ reg8 = inb(0x62);
+ gnvs->brtl = reg8;
+ break;
+ default:
+ printk_debug("Unknown function\n");
+ break;
+ }
+
+ /* On success, the IO Trap Handler returns 0
+ * On failure, the IO Trap Handler returns a value != 0
+ *
+ * For now, we force the return value to 0 and log all traps to
+ * see what's going on.
+ */
+ //gnvs->smif = 0;
+}
+
+/**
+ * @brief Set the EOS bit
+ */
+static void smi_set_eos(void)
+{
+ u8 reg8;
+
+ reg8 = inb(pmbase + SMI_EN);
+ reg8 |= EOS;
+ outb(reg8, pmbase + SMI_EN);
+}
+
+/**
+ * @brief Interrupt handler for SMI#
+ *
+ * @param smm_revision revision of the smm state save map
+ */
+
+void smi_handler(u32 smm_revision)
+{
+ u8 reg8;
+ u16 pmctrl;
+ u16 pm1_sts;
+ u32 smi_sts, gpe0_sts, tco_sts;
+ unsigned int node;
+ smm_state_save_area_t state_save;
+
+ /* Are we ok to execute the handler? */
+ if (!smi_obtain_lock())
+ return;
+
+ node=nodeid();
+
+#ifdef DEBUG_SMI
+ console_loglevel = DEFAULT_CONSOLE_LOGLEVEL;
+#else
+ console_loglevel = 1;
+#endif
+
+ printk_debug("\nSMI# #%d\n", node);
+
+ switch (smm_revision) {
+ case 0x00030007:
+ state_save.type = LEGACY;
+ state_save.legacy_state_save = (legacy_smm_state_save_area_t *)
+ (0xa8000 + 0x7e00 - (node * 0x400));
+ break;
+ case 0x00030100:
+ state_save.type = EM64T;
+ state_save.em64t_state_save = (em64t_smm_state_save_area_t *)
+ (0xa8000 + 0x7d00 - (node * 0x400));
+ break;
+ default:
+ printk_debug("smm_revision: 0x%08x\n", smm_revision);
+ printk_debug("SMI# not supported on your CPU\n");
+ /* Don't release lock, so no further SMI will happen,
+ * if we don't handle it anyways.
+ */
+ return;
+ }
+
+ pmbase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc;
+ printk_spew("SMI#: pmbase = 0x%04x\n", pmbase);
+
+ /* We need to clear the SMI status registers, or we won't see what's
+ * happening in the following calls.
+ */
+ smi_sts = reset_smi_status();
+ dump_smi_status(smi_sts);
+
+ if (smi_sts & (1 << 21)) { // MONITOR
+ global_nvs_t *gnvs = (global_nvs_t *)0xc00;
+ int i;
+ u32 reg32;
+
+ reg32 = RCBA32(0x1e00); // TRSR - Trap Status Register
+#if 0
+ /* Comment in for some useful debug */
+ for (i=0; i<4; i++) {
+ if (reg32 & (1 << i)) {
+ printk_debug(" io trap #%d\n", i);
+ }
+ }
+#endif
+ RCBA32(0x1e00) = reg32; // TRSR
+
+ reg32 = RCBA32(0x1e10);
+
+ if ((reg32 & 0xfffc) != 0x808) {
+ printk_debug(" trapped io address = 0x%x\n", reg32 & 0xfffc);
+ printk_debug(" AHBE = %x\n", (reg32 >> 16) & 0xf);
+ printk_debug(" read/write: %s\n", (reg32 & (1 << 24)) ? "read" :
+ "write");
+ }
+
+ if (!(reg32 & (1 << 24))) {
+ /* Write Cycle */
+ reg32 = RCBA32(0x1e18);
+ printk_debug(" iotrap written data = 0x%08x\n", reg32);
+
+ }
+
+ if (gnvs->smif)
+ io_trap_handler(gnvs->smif); // call function smif
+ }
+
+ if (smi_sts & (1 << 13)) { // TCO
+ tco_sts = reset_tco_status();
+ dump_tco_status(tco_sts);
+
+ if (tco_sts & (1 << 8)) { // BIOSWR
+ u8 bios_cntl;
+
+ bios_cntl = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc);
+
+ if (bios_cntl & 1) {
+ /* BWE is RW, so the SMI was caused by a
+ * write to BWE, not by a write to the BIOS
+ */
+
+ /* This is the place where we notice someone
+ * is trying to tinker with the BIOS. We are
+ * trying to be nice and just ignore it. A more
+ * resolute answer would be to power down the
+ * box.
+ */
+ printk_debug("Switching back to RO\n");
+ pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
+ } /* No else for now? */
+ }
+ }
+
+ if (smi_sts & (1 << 8)) { // PM1
+ pm1_sts = reset_pm1_status();
+ dump_pm1_status(pm1_sts);
+ }
+
+ if (smi_sts & (1 << 9)) { // GPE0
+ gpe0_sts = reset_gpe0_status();
+ dump_gpe0_status(gpe0_sts);
+ }
+
+ if (smi_sts & (1 << 5)) { // APM
+ /* Emulate B2 register as the FADT / Linux expects it */
+
+ reg8 = inb(0xb2);
+ switch (reg8) {
+ case ACPI_DISABLE:
+ pmctrl = inw(pmbase + 0x04);
+ pmctrl |= (1 << 0);
+ outw(pmctrl, pmbase + 0x04);
+ printk_debug("SMI#: ACPI disabled.\n");
+ break;
+ case ACPI_ENABLE:
+ pmctrl = inw(pmbase + 0x04);
+ pmctrl &= ~(1 << 0);
+ outw(pmctrl, pmbase + 0x04);
+ printk_debug("SMI#: ACPI enabled.\n");
+ break;
+ }
+ }
+
+ if (smi_sts & (1 << 4)) { // SLP_SMI
+ u32 reg32;
+ reg32 = inl(pmbase + 0x04);
+ printk_debug("SMI#: SLP = 0x%08x\n");
+ printk_debug("SMI#: Powering off.\n");
+ outl((6 << 10), pmbase + 0x04);
+ outl((1 << 13) | (6 << 10), pmbase + 0x04);
+ printk_debug("....\n");
+ }
+
+
+ smi_release_lock();
+
+ /* De-assert SMI# signal to allow another SMI */
+ smi_set_eos();
+}
diff --git a/src/southbridge/intel/i82801gx/smm.ld b/src/southbridge/intel/i82801gx/smm.ld
new file mode 100644
index 0000000000..1b25c2d2f8
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/smm.ld
@@ -0,0 +1,53 @@
+
+/* Maximum number of CPUs/cores */
+CPUS = 4;
+
+SECTIONS
+{
+ /* This is the actual SMM handler.
+ *
+ * We just put code, rodata, data and bss all in a row.
+ */
+ . = 0xa0000;
+ .handler (.): {
+ /* Assembler stub */
+ *(.handler)
+
+ /* C code of the SMM handler */
+ *(.text);
+ *(.text.*);
+
+ /* C read-only data of the SMM handler */
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata.*)
+
+ /* C read-write data of the SMM handler */
+ . = ALIGN(4);
+ *(.data)
+
+ /* C uninitialized data of the SMM handler */
+ . = ALIGN(4);
+ *(.bss)
+ *(.sbss)
+
+ /* What is this? */
+ *(COMMON)
+ . = ALIGN(4);
+ }
+
+ /* We are using the ASEG interleaved to stuff the SMM handlers
+ * for all CPU cores in there. The jump table redirects the execution
+ * to the actual SMM handler
+ */
+ . = 0xa8000 - (( CPUS - 1) * 0x400);
+ .jumptable : {
+ *(.jumptable)
+ }
+
+ /DISCARD/ : {
+ *(.comment)
+ *(.note)
+ *(.note.*)
+ }
+}
diff --git a/src/southbridge/intel/i82801gx/smmhandler.S b/src/southbridge/intel/i82801gx/smmhandler.S
new file mode 100644
index 0000000000..f1bc550365
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/smmhandler.S
@@ -0,0 +1,201 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* NOTE: This handler assumes the SMM window goes from 0xa0000
+ * to 0xaffff. In fact, at least on Intel Core CPUs (i945 chipset)
+ * the SMM window is 128K big, covering 0xa0000 to 0xbffff.
+ * So there is a lot of potential for growth in here. Let's stick
+ * to 64k if we can though.
+ */
+
+/*
+ * +--------------------------------+ 0xaffff
+ * | Save State Map Node 0 |
+ * | Save State Map Node 1 |
+ * | Save State Map Node 2 |
+ * | Save State Map Node 3 |
+ * | ... |
+ * +--------------------------------+ 0xaf000
+ * | |
+ * | |
+ * | |
+ * +--------------------------------+ 0xa8400
+ * | SMM Entry Node 0 (+ stack) |
+ * +--------------------------------+ 0xa8000
+ * | SMM Entry Node 1 (+ stack) |
+ * | SMM Entry Node 2 (+ stack) |
+ * | SMM Entry Node 3 (+ stack) |
+ * | ... |
+ * +--------------------------------+ 0xa7400
+ * | |
+ * | SMM Handler |
+ * | |
+ * +--------------------------------+ 0xa0000
+ *
+ */
+
+#include <arch/asm.h>
+
+#define LAPIC_ID 0xfee00020
+
+/* SMM_HANDLER_OFFSET is the 16bit offset within the ASEG
+ * at which smm_handler_start lives. At the moment the handler
+ * lives right at 0xa0000, so the offset is 0.
+ */
+
+#define SMM_HANDLER_OFFSET 0x0000
+
+/* initially SMM is some sort of real mode. Let gcc know
+ * how to treat the SMM handler stub
+ */
+
+.section ".handler", "a", @progbits
+
+.code16
+
+/**
+ * SMM code to enable protected mode and jump to the
+ * C-written function void smi_handler(u32 smm_revision)
+ *
+ * All the bad magic is not all that bad after all.
+ */
+smm_handler_start:
+ movw $(smm_gdtptr16 - smm_handler_start + SMM_HANDLER_OFFSET), %bx
+ data32 lgdt %cs:(%bx)
+
+ movl %cr0, %eax
+ andl $0x7FFAFFD1, %eax /* PG,AM,WP,NE,TS,EM,MP = 0 */
+ orl $0x60000001, %eax /* CD, NW, PE = 1 */
+ movl %eax, %cr0
+
+ /* Enable protected mode */
+ data32 ljmp $0x08, $1f
+
+.code32
+1:
+ /* Use flat data segment */
+ movw $0x10, %ax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss
+ movw %ax, %fs
+ movw %ax, %gs
+
+ /* Get this CPU's LAPIC ID */
+ movl $LAPIC_ID, %esi
+ movl (%esi), %ecx
+ shr $24, %ecx
+
+ /* calculate stack offset by multiplying the APIC ID
+ * by 1024 (0x400), and save that offset in ebp.
+ */
+ shl $10, %ecx
+ movl %ecx, %ebp
+
+ /* We put the stack for each core right above
+ * its SMM entry point. Core 0 starts at 0xa8000,
+ * we spare 0x10 bytes for the jump to be sure.
+ */
+ movl $0xa8010, %eax
+ subl %ecx, %eax /* subtract offset, see above */
+ movl %eax, %ebx /* Save bottom of stack in ebx */
+
+#define SMM_STACK_SIZE (0x400 - 0x10)
+ /* clear stack */
+ cld
+ movl %eax, %edi
+ movl $(SMM_STACK_SIZE >> 2), %ecx
+ xorl %eax, %eax
+ rep stosl
+
+ /* set new stack */
+ addl $SMM_STACK_SIZE, %ebx
+ movl %ebx, %esp
+
+ /* Get SMM revision */
+ movl $0xa8000 + 0x7efc, %ebx /* core 0 address */
+ subl %ebp, %ebx /* subtract core X offset */
+ movl (%ebx), %eax
+ pushl %eax
+
+ /* Call 32bit C handler */
+ call smi_handler
+
+ /* To return, just do rsm. It will "clean up" protected mode */
+ rsm
+
+.code16
+
+.align 4, 0xff
+
+smm_gdtptr16:
+ .word smm_gdt_end - smm_gdt - 1
+ .long smm_gdt - smm_handler_start + 0xa0000 + SMM_HANDLER_OFFSET
+
+.code32
+
+smm_gdt:
+ /* The first GDT entry can not be used. Keep it zero */
+ .long 0x00000000, 0x00000000
+
+ /* gdt selector 0x08, flat code segment */
+ .word 0xffff, 0x0000
+ .byte 0x00, 0x9b, 0xcf, 0x00 /* G=1 and 0x0f, 4GB limit */
+
+ /* gdt selector 0x10, flat data segment */
+ .word 0xffff, 0x0000
+ .byte 0x00, 0x93, 0xcf, 0x00
+
+smm_gdt_end:
+
+
+.section ".jumptable", "a", @progbits
+
+/* This is the SMM jump table. All cores use the same SMM handler
+ * for simplicity. But SMM Entry needs to be different due to the
+ * save state area. The jump table makes sure all CPUs jump into the
+ * real handler on SMM entry.
+ */
+
+/* This code currently supports up to 4 CPU cores. If more than 4 CPU cores
+ * shall be used, below table has to be updated, as well as smm.ld
+ */
+
+/* GNU AS/LD will always generate code that assumes CS is 0xa000. In reality
+ * CS will be set to SMM_BASE[19:4] though. Knowing that the smm handler is the
+ * first thing in the ASEG, we do a far jump here, to set CS to 0xa000.
+ */
+
+.code16
+jumptable:
+ /* core 3 */
+ ljmp $0xa000, $SMM_HANDLER_OFFSET
+.align 1024, 0x00
+ /* core 2 */
+ ljmp $0xa000, $SMM_HANDLER_OFFSET
+.align 1024, 0x00
+ /* core 1 */
+ ljmp $0xa000, $SMM_HANDLER_OFFSET
+.align 1024, 0x00
+ /* core 0 */
+ ljmp $0xa000, $SMM_HANDLER_OFFSET
+.align 1024, 0x00
+
diff --git a/src/southbridge/intel/i82801gx/smmrelocate.S b/src/southbridge/intel/i82801gx/smmrelocate.S
new file mode 100644
index 0000000000..2a7bfc23c7
--- /dev/null
+++ b/src/southbridge/intel/i82801gx/smmrelocate.S
@@ -0,0 +1,168 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/asm.h>
+#include "../../../../src/northbridge/intel/i945/ich7.h"
+
+#undef DEBUG_SMM_RELOCATION
+//#define DEBUG_SMM_RELOCATION
+
+#define LAPIC_ID 0xfee00020
+
+.global smm_relocation_start
+.global smm_relocation_end
+
+/* initially SMM is some sort of real mode. */
+.code16
+
+/**
+ * This trampoline code relocates SMBASE to 0xa0000 - ( lapicid * 0x400 )
+ *
+ * Why 0x400? It is a safe value to cover the save state area per CPU. On
+ * current AMD CPUs this area is _documented_ to be 0x200 bytes. On Intel
+ * Core 2 CPUs the _documented_ parts of the save state area is 48 bytes
+ * bigger, effectively sizing our data structures 0x300 bytes.
+ *
+ * LAPICID SMBASE SMM Entry SAVE STATE
+ * 0 0xa0000 0xa8000 0xafd00
+ * 1 0x9fc00 0xa7c00 0xaf900
+ * 2 0x9f800 0xa7800 0xaf500
+ * 3 0x9f400 0xa7400 0xaf100
+ * 4 0x9f000 0xa7000 0xaed00
+ * 5 0x9ec00 0xa6c00 0xae900
+ * 6 0x9e800 0xa6800 0xae500
+ * 7 0x9e400 0xa6400 0xae100
+ * 8 0x9e000 0xa6000 0xadd00
+ * 9 0x9dc00 0xa5c00 0xad900
+ * 10 0x9d800 0xa5800 0xad500
+ * 11 0x9d400 0xa5400 0xad100
+ * 12 0x9d000 0xa5000 0xacd00
+ * 13 0x9cc00 0xa4c00 0xac900
+ * 14 0x9c800 0xa4800 0xac500
+ * 15 0x9c400 0xa4400 0xac100
+ * . . . .
+ * . . . .
+ * . . . .
+ * 31 0x98400 0xa0400 0xa8100
+ *
+ * With 32 cores, the SMM handler would need to fit between
+ * 0xa0000-0xa0400 and the stub plus stack would need to go
+ * at 0xa8000-0xa8100 (example for core 0). That is not enough.
+ *
+ * This means we're basically limited to 16 cpu cores before
+ * we need to use the TSEG/HSEG for the actual SMM handler plus stack.
+ * When we exceed 32 cores, we also need to put SMBASE to TSEG/HSEG.
+ *
+ * If we figure out the documented values above are safe to use,
+ * we could pack the structure above even more, so we could use the
+ * scheme to pack save state areas for 63 AMD CPUs or 58 Intel CPUs
+ * in the ASEG.
+ *
+ * Note: Some versions of Pentium M need their SMBASE aligned to 32k.
+ * On those the above only works for up to 2 cores. But for now we only
+ * care fore Core (2) Duo/Solo
+ *
+ */
+
+smm_relocation_start:
+ /* Check revision to see if AMD64 style SMM_BASE
+ * Intel Core Solo/Duo: 0x30007
+ * Intel Core2 Solo/Duo: 0x30100
+ * AMD64: 0x3XX64
+ * This check does not make much sense, unless someone ports
+ * SMI handling to AMD64 CPUs.
+ */
+
+ mov $0x38000 + 0x7efc, %ebx
+ addr32 mov (%ebx), %al
+ cmp $0x64, %al
+ je 1f
+
+ mov $0x38000 + 0x7ef8, %ebx
+ jmp smm_relocate
+1:
+ mov $0x38000 + 0x7f00, %ebx
+
+smm_relocate:
+ /* Get this CPU's LAPIC ID */
+ movl $LAPIC_ID, %esi
+ addr32 movl (%esi), %ecx
+ shr $24, %ecx
+
+ /* calculate offset by multiplying the
+ * apic ID by 1024 (0x400)
+ */
+ movl %ecx, %edx
+ shl $10, %edx
+
+ movl $0xa0000, %eax
+ subl %edx, %eax /* subtract offset, see above */
+
+ addr32 movl %eax, (%ebx)
+
+
+ /* The next section of code is hardware specific */
+
+ /* Clear SMI status */
+ movw $(DEFAULT_PMBASE + 0x34), %dx
+ inw %dx, %ax
+ outw %ax, %dx
+
+ /* Clear PM1 status */
+ movw $(DEFAULT_PMBASE + 0x00), %dx
+ inw %dx, %ax
+ outw %ax, %dx
+
+ /* Set EOS bit so other SMIs can occur */
+ movw $(DEFAULT_PMBASE + 0x30), %dx
+ inl %dx, %eax
+ orl $(1 << 1), %eax
+ outl %eax, %dx
+
+ /* End of hardware specific section. */
+#ifdef DEBUG_SMM_RELOCATION
+ /* print [SMM-x] so we can determine if CPUx went to SMM */
+ movw $TTYS0_BASE, %dx
+ mov $'[', %al
+ outb %al, %dx
+ mov $'S', %al
+ outb %al, %dx
+ mov $'M', %al
+ outb %al, %dx
+ outb %al, %dx
+ movb $'-', %al
+ outb %al, %dx
+ /* calculate ascii of cpu number. More than 9 cores? -> FIXME */
+ movb %cl, %al
+ addb $'0', %al
+ outb %al, %dx
+ mov $']', %al
+ outb %al, %dx
+ mov $'\r', %al
+ outb %al, %dx
+ mov $'\n', %al
+ outb %al, %dx
+#endif
+
+ /* That's it. return */
+ rsm
+smm_relocation_end:
+