summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/artecgroup/dbe61/Options.lb4
-rw-r--r--src/mainboard/artecgroup/dbe61/rtl8139/Config.lb2
-rw-r--r--src/mainboard/artecgroup/dbe61/rtl8139/chip.h11
-rw-r--r--src/mainboard/artecgroup/dbe61/rtl8139/rtl8139.c65
4 files changed, 2 insertions, 80 deletions
diff --git a/src/mainboard/artecgroup/dbe61/Options.lb b/src/mainboard/artecgroup/dbe61/Options.lb
index b42f0d04a7..c5d60bc2fc 100644
--- a/src/mainboard/artecgroup/dbe61/Options.lb
+++ b/src/mainboard/artecgroup/dbe61/Options.lb
@@ -42,7 +42,7 @@ uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses VIDEO_MB
+uses CONFIG_VIDEO_MB
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE = 256*1024
@@ -52,7 +52,7 @@ default ROM_SIZE = 256*1024
###
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=0
-default VIDEO_MB=8
+default CONFIG_VIDEO_MB=8
##
## Build code for the fallback boot
diff --git a/src/mainboard/artecgroup/dbe61/rtl8139/Config.lb b/src/mainboard/artecgroup/dbe61/rtl8139/Config.lb
deleted file mode 100644
index e429dca311..0000000000
--- a/src/mainboard/artecgroup/dbe61/rtl8139/Config.lb
+++ /dev/null
@@ -1,2 +0,0 @@
-config chip.h
-driver rtl8139.o
diff --git a/src/mainboard/artecgroup/dbe61/rtl8139/chip.h b/src/mainboard/artecgroup/dbe61/rtl8139/chip.h
deleted file mode 100644
index 82cf2a0276..0000000000
--- a/src/mainboard/artecgroup/dbe61/rtl8139/chip.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef PCI_RTL8139_H
-#define PCI_RTL8139_H
-
-struct drivers_pci_rtl8139_config
-{
- uint8_t nic_irq; // RTL8139 NIC
-};
-//struct chip_operations;
-extern struct chip_operations drivers_pci_rtl8139_ops;
-
-#endif
diff --git a/src/mainboard/artecgroup/dbe61/rtl8139/rtl8139.c b/src/mainboard/artecgroup/dbe61/rtl8139/rtl8139.c
deleted file mode 100644
index d3f0c5f776..0000000000
--- a/src/mainboard/artecgroup/dbe61/rtl8139/rtl8139.c
+++ /dev/null
@@ -1,65 +0,0 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#undef __KERNEL__
-#include <arch/io.h>
-#include <string.h>
-#include "chip.h"
-
-void pci_level_irq(unsigned char intNum);
-
-// initialize Realtek NIC
-
-static void nic_initialize(device_t dev)
-{
- struct drivers_pci_rtl8139_config *cfg = (struct drivers_pci_rtl8139_config*)dev->chip_info;
- uint16_t pciCmd = 0;
-
- printk_debug("RTL8139 initialize\n");
-
- dev->on_mainboard=1;
- pci_dev_init(dev);
-
- // Set PCI IRQ descriptors.
- // This configures nothing (no magic done in VSA, too), only descriptors are set,
- // that are later read by operating system to find out which irq is used by dev.
- // The real GPIO to IRQ mapping configuration takes place in cs5536.c
- // and is configurable in Config.lb.
-
- printk_debug("Setting NIC IRQ to %d\n", cfg->nic_irq);
- pci_write_config8(dev, PCI_INTERRUPT_LINE, cfg->nic_irq);
- pci_level_irq(cfg->nic_irq);
-
- // RTL8139 must have bus mastering for some data transfers
- pciCmd = pci_read_config16(dev, PCI_COMMAND);
- pciCmd |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO);
- pci_write_config16(dev, PCI_COMMAND, pciCmd);
-}
-
-// device operations : on PCI device init, call nic_initialize
-
-static struct device_operations drivers_pci_rtl8139_dev_ops =
-{
- .init = nic_initialize,
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .scan_bus = 0,
-};
-
-
-/* FIRST LOOP : traversing static.c list and enabling all chips found in there
- * set given device operations descriptor to call nic_initialize
- * */
-
-void nic_configure_pci(device_t dev)
-{
- dev->ops = &drivers_pci_rtl8139_dev_ops;
-}
-
-// PCI NIC operations
-struct chip_operations drivers_pci_rtl8139_ops = {
- .enable_dev = nic_configure_pci,
-};