diff options
| -rw-r--r-- | src/mainboard/asus/m5a88-v/romstage.c | 2 | ||||
| -rw-r--r-- | src/superio/ite/it8721f/Makefile.inc | 2 | ||||
| -rw-r--r-- | src/superio/ite/it8721f/chip.h | 3 | ||||
| -rw-r--r-- | src/superio/ite/it8721f/early_serial.c | 74 | ||||
| -rw-r--r-- | src/superio/ite/it8721f/it8721f.h | 18 | ||||
| -rw-r--r-- | src/superio/ite/it8721f/superio.c | 3 |
6 files changed, 48 insertions, 54 deletions
diff --git a/src/mainboard/asus/m5a88-v/romstage.c b/src/mainboard/asus/m5a88-v/romstage.c index db8b7b5cf5..94a1e4e596 100644 --- a/src/mainboard/asus/m5a88-v/romstage.c +++ b/src/mainboard/asus/m5a88-v/romstage.c @@ -41,7 +41,7 @@ #include "northbridge/amd/amdfam10/reset_test.c" #include <console/loglevel.h> #include "cpu/x86/bist.h" -#include "superio/ite/it8721f/early_serial.c" +#include <superio/ite/it8721f/it8721f.h> #include <cpu/amd/mtrr.h> #include "northbridge/amd/amdfam10/setup_resource_map.c" #include "southbridge/amd/rs780/early_setup.c" diff --git a/src/superio/ite/it8721f/Makefile.inc b/src/superio/ite/it8721f/Makefile.inc index 712d020eb2..ef616f4460 100644 --- a/src/superio/ite/it8721f/Makefile.inc +++ b/src/superio/ite/it8721f/Makefile.inc @@ -18,5 +18,5 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## +romstage-$(CONFIG_SUPERIO_ITE_IT8721F) += early_serial.c ramstage-$(CONFIG_SUPERIO_ITE_IT8721F) += superio.c - diff --git a/src/superio/ite/it8721f/chip.h b/src/superio/ite/it8721f/chip.h index bd04460b5a..e903cd651a 100644 --- a/src/superio/ite/it8721f/chip.h +++ b/src/superio/ite/it8721f/chip.h @@ -21,11 +21,10 @@ #ifndef SUPERIO_ITE_IT8721F_CHIP_H #define SUPERIO_ITE_IT8721F_CHIP_H -#include <device/device.h> #include <pc80/keyboard.h> struct superio_ite_it8721f_config { struct pc_keyboard keyboard; }; -#endif +#endif /* SUPERIO_ITE_IT8721F_CHIP_H */ diff --git a/src/superio/ite/it8721f/early_serial.c b/src/superio/ite/it8721f/early_serial.c index 20e19b65aa..df662223dc 100644 --- a/src/superio/ite/it8721f/early_serial.c +++ b/src/superio/ite/it8721f/early_serial.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> * Copyright (C) 2011 QingPei Wang <wangqingpei@gmail.com> + * Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,30 +21,25 @@ */ #include <arch/io.h> +#include <device/pnp.h> +#include <stdint.h> #include "it8721f.h" -/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE 0x2e -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - /* Global configuration registers. */ #define IT8721F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8721F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ #define IT8721F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ #define IT8721F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ -static void it8721f_sio_write(u8 ldn, u8 index, u8 value) +static void it8721f_sio_write(device_t dev, u8 index, u8 value) { - outb(IT8721F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); + pnp_set_logical_device(dev); + pnp_write_config(dev, index, value); } -static void it8721f_enter_conf(void) +static void it8721f_enter_conf(device_t dev) { - u16 port = 0x2e; /* TODO: Don't hardcode! */ + u16 port = dev >> 8; outb(0x87, port); outb(0x01, port); @@ -51,43 +47,39 @@ static void it8721f_enter_conf(void) outb((port == 0x4e) ? 0xaa : 0x55, port); } -static void it8721f_exit_conf(void) +static void it8721f_exit_conf(device_t dev) { - it8721f_sio_write(0x00, IT8721F_CONFIG_REG_CC, 0x02); + it8721f_sio_write(dev, IT8721F_CONFIG_REG_CC, 0x02); } -/* Select 24MHz CLKIN (48MHz default). */ -void it8721f_24mhz_clkin(void) +static void it8721f_reg_write(device_t dev, u8 index, u8 value) { - it8721f_enter_conf(); - it8721f_sio_write(0x00, IT8721F_CONFIG_REG_CLOCKSEL, 0x1); - it8721f_exit_conf(); + it8721f_enter_conf(dev); + it8721f_sio_write(dev, index, value); + it8721f_exit_conf(dev); } -/* Enable the serial port(s). */ -void it8721f_enable_serial(device_t dev, u16 iobase) +/* + * in romstage.c + * #define CLKIN_DEV PNP_DEV(0x2e, IT8721F_GPIO) + * and pass: CLKIN_DEV + * IT8721F_UART_CLK_PREDIVIDE_24 + * IT8721F_UART_CLK_PREDIVIDE_48 (default) + */ +void it8721f_conf_clkin(device_t dev, u8 predivide) { - /* (1) Enter the configuration state (MB PnP mode). */ - it8721f_enter_conf(); - - /* (2) Modify the data of configuration registers. */ - - /* - * Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. - */ - - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CONFIGSEL, 0x00); */ - - /* Enable serial port(s). */ - it8721f_sio_write(IT8721F_SP1, 0x30, 0x1); /* Serial port 1 */ - it8721f_sio_write(IT8721F_SP2, 0x30, 0x1); /* Serial port 2 */ + it8721f_reg_write(dev, IT8721F_CONFIG_REG_CLOCKSEL, (0x1 & predivide)); +} - /* Clear software suspend mode (clear bit 0). TODO: Needed? */ - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_SWSUSP, 0x00); */ - /* (3) Exit the configuration state (MB PnP mode). */ - it8721f_exit_conf(); +/* Enable the serial port(s). */ +void it8721f_enable_serial(device_t dev, u16 iobase) +{ + it8721f_enter_conf(dev); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, iobase); + pnp_set_enable(dev, 1); + it8721f_exit_conf(dev); } diff --git a/src/superio/ite/it8721f/it8721f.h b/src/superio/ite/it8721f/it8721f.h index 25300e6659..9d5a528295 100644 --- a/src/superio/ite/it8721f/it8721f.h +++ b/src/superio/ite/it8721f/it8721f.h @@ -19,9 +19,13 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#ifndef SUPERIO_ITE_IT8721F_IT8721F_H -#define SUPERIO_ITE_IT8721F_IT8721F_H +#ifndef SUPERIO_ITE_IT8721F_H +#define SUPERIO_ITE_IT8721F_H +#include <device/pnp.h> +#include <stdint.h> + +/* Logical Device Numbers (LDN). */ #define IT8721F_FDC 0x00 /* Floppy */ #define IT8721F_SP1 0x01 /* Com1 */ #define IT8721F_SP2 0x02 /* Com2 */ @@ -32,10 +36,10 @@ #define IT8721F_GPIO 0x07 /* GPIO */ #define IT8721F_IR 0x0a /* Consumer IR */ -#if defined(__PRE_RAM__) -void it8721f_24mhz_clkin(void); -void it8721f_disable_reboot(void); +#define IT8721F_UART_CLK_PREDIVIDE_48 0x00 /* default */ +#define IT8721F_UART_CLK_PREDIVIDE_24 0x01 + +void it8721f_conf_clkin(device_t dev, u8 predivide); void it8721f_enable_serial(device_t dev, u16 iobase); -#endif -#endif +#endif /* SUPERIO_ITE_IT8721F_H */ diff --git a/src/superio/ite/it8721f/superio.c b/src/superio/ite/it8721f/superio.c index 27eab4905d..300a480e60 100644 --- a/src/superio/ite/it8721f/superio.c +++ b/src/superio/ite/it8721f/superio.c @@ -67,8 +67,7 @@ static struct pnp_info pnp_dev_info[] = { static void enable_dev(struct device *dev) { - pnp_enable_devices(dev, &pnp_ops, - ARRAY_SIZE(pnp_dev_info), pnp_dev_info); + pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info); } struct chip_operations superio_ite_it8721f_ops = { |