diff options
Diffstat (limited to 'Documentation/flash_tutorial/ext_standalone.md')
-rw-r--r-- | Documentation/flash_tutorial/ext_standalone.md | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/Documentation/flash_tutorial/ext_standalone.md b/Documentation/flash_tutorial/ext_standalone.md new file mode 100644 index 0000000000..3a676ce47c --- /dev/null +++ b/Documentation/flash_tutorial/ext_standalone.md @@ -0,0 +1,23 @@ +# Flashing firmware standalone + +If none of the other methods work, there are three possibilities: + +## Desolder +You must remove or desolder the flash IC before you can flash it. +It's recommended to solder a socket in place of the flash IC. + +When flashing the IC, always connect all input pins. +If in doubt, pull /WP, /HOLD, /RESET and alike up towards Vcc. + +## SPI flash emulator +If you are a developer, you might want to use an [EM100Pro] instead, which sets +the onboard flash on hold, and allows to run custom firmware. +It provides a very fast development cycle without actually writing to flash. + +## SPI flash overwrite +It is possible to set the onboard flash on hold and use another flash chip. +Connect all lines one-to-one, except /HOLD. Pull /HOLD of the soldered flash IC +low, and /HOLD of your replacement flash IC high. + + +[EM100Pro]: https://www.dediprog.com/product/EM100Pro |