summaryrefslogtreecommitdiff
path: root/Documentation/getting_started/architecture.md
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/getting_started/architecture.md')
-rw-r--r--Documentation/getting_started/architecture.md105
1 files changed, 105 insertions, 0 deletions
diff --git a/Documentation/getting_started/architecture.md b/Documentation/getting_started/architecture.md
new file mode 100644
index 0000000000..6ef63594cf
--- /dev/null
+++ b/Documentation/getting_started/architecture.md
@@ -0,0 +1,105 @@
+# coreboot architecture
+
+## Overwiew
+![][architecture]
+
+[architecture]: comparision_coreboot_uefi.svg
+
+## Stages
+coreboot consists of multiple stages that are compiled as separate binaries and
+are inserted into the CBFS with custom compression. The bootblock usually doesn't
+have compression while the ramstage and payload are compressed with LZMA.
+
+Each stage loads the next stage a given address (possibly decompressing it).
+
+Some stages are relocatable and can be placed anywhere in DRAM. Those stages are
+usually cached in CBMEM for faster loading times on ACPI S3 resume.
+
+Supported stage compressions:
+* none
+* LZ4
+* LZMA
+
+## bootblock
+The bootblock is the first stage executed after CPU reset. It is written in
+assembly language and its main task is to set up everything for a C-environment:
+
+Common tasks:
+
+* Cache-As-RAM for heap and stack
+* Set stack pointer
+* Clear memory for BSS
+* Decompress and load the next stage
+
+On x86 platforms that includes:
+
+* Microcode updates
+* Timer init
+* Switching from 16-bit real-mode to 32-bit protected mode
+
+The bootblock loads the romstage or the verstage if verified boot is enabled.
+
+### Cache-As-Ram
+The *Cache-As-Ram*, also called Non-Eviction mode, or *CAR* allows to use the
+CPU cache like regular SRAM. This is particullary usefull for high level
+languages like `C`, which need RAM for heap and stack.
+
+The CAR needs to be activated using vendor specific CPU instructions.
+
+The following stages run when Cache-As-Ram is active:
+* bootblock
+* romstage
+* verstage
+* postcar
+
+## verstage
+The verstage is where the root-of-trust starts. It's assumed that
+it cannot be overwritten in-field (together with the public key) and
+it starts at the very beginning of the boot process.
+The verstage installs a hook to verify a file before it's loaded from
+CBFS or a partition before it's accessed.
+
+The verified boot mechanism allows trusted in-field firmware updates
+combined with a fail-safe recovery mode.
+
+## romstage
+The romstage initializes the DRAM and prepares everything for device init.
+
+Common tasks:
+
+* Early device init
+* DRAM init
+
+## postcar
+To leave the CAR setup and run code from regular DRAM the postcar-stage tears
+down CAR and loads the ramstage. Compared to other stages it's minimal in size.
+
+## ramstage
+
+The ramstage does the main device init:
+
+* PCI device init
+* On-chip device init
+* TPM init (if not done by verstage)
+* Graphics init (optional)
+* CPU init (like set up SMM)
+
+After initialization tables are written to inform the payload or operating system
+about the current hardware existance and state. That includes:
+
+* ACPI tables (x86 specific)
+* SMBIOS tables (x86 specific)
+* coreboot tables
+* devicetree updates (ARM specific)
+
+It also does hardware and firmware lockdown:
+* Write-protection of boot media
+* Lock security related registers
+* Lock SMM mode (x86 specific)
+
+## payload
+The payload is the software that is run after coreboot is done. It resides in
+the CBFS and there's no possibility to choose it at runtime.
+
+For more details have a look at [payloads](../payloads.md).
+