summaryrefslogtreecommitdiff
path: root/Documentation/gfx/libgfxinit.md
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/gfx/libgfxinit.md')
-rw-r--r--Documentation/gfx/libgfxinit.md26
1 files changed, 18 insertions, 8 deletions
diff --git a/Documentation/gfx/libgfxinit.md b/Documentation/gfx/libgfxinit.md
index 0608363906..bb4528b958 100644
--- a/Documentation/gfx/libgfxinit.md
+++ b/Documentation/gfx/libgfxinit.md
@@ -65,11 +65,20 @@ board can initialize graphics through *libgfxinit*:
select MAINBOARD_HAS_LIBGFXINIT
Internal ports share some hardware blocks (e.g. backlight, panel
-power sequencer). Therefore, each board has to select either eDP
-or LVDS as the internal port, if any:
+power sequencer). Therefore, each system with an integrated panel
+should set `GFX_GMA_PANEL_1_PORT` to the respective port, e.g.:
- select GFX_GMA_INTERNAL_IS_EDP # the default, or
- select GFX_GMA_INTERNAL_IS_LVDS
+ config GFX_GMA_PANEL_1_PORT
+ default "DP3"
+
+For the most common cases, LVDS and eDP, exists a shorthand, one
+can select either:
+
+ select GFX_GMA_PANEL_1_ON_EDP # the default, or
+ select GFX_GMA_PANEL_1_ON_LVDS
+
+Some newer chips feature a second block of panel control logic.
+For this, `GFX_GMA_PANEL_2_PORT` can be set.
Boards with a DVI-I connector share the DDC (I2C) pins for both
analog and digital displays. In this case, *libgfxinit* needs to
@@ -96,7 +105,8 @@ You can select from the following Ports:
type Port_Type is
(Disabled, -- optionally terminates the list
- Internal, -- either eDP or LVDS as selected in Kconfig
+ LVDS,
+ eDP,
DP1,
DP2,
DP3,
@@ -112,8 +122,7 @@ both DPx and HDMIx should be listed.
A good example is the mainboard Kontron/KTQM77, it features two
DP++ ports (DP2/HDMI2, DP3/HDMI3), one DVI-I port (HDMI1/Analog),
-eDP and LVDS. Due to the constraints mentioned above, only one of
-eDP and LVDS can be enabled. It defines `ports` as follows:
+eDP and LVDS. It defines `ports` as follows:
ports : constant Port_List :=
(DP2,
@@ -122,7 +131,8 @@ eDP and LVDS can be enabled. It defines `ports` as follows:
HDMI2,
HDMI3,
Analog,
- Internal,
+ LVDS,
+ eDP,
others => Disabled);
The `GMA.gfxinit()` procedure probes for display EDIDs in the