diff options
Diffstat (limited to 'Documentation/mainboard/pcengines')
| -rw-r--r-- | Documentation/mainboard/pcengines/apu1.md | 97 | ||||
| -rw-r--r-- | Documentation/mainboard/pcengines/apu1_spi.jpg | bin | 0 -> 25809 bytes | |||
| -rw-r--r-- | Documentation/mainboard/pcengines/apu1c1.jpg | bin | 0 -> 48550 bytes |
3 files changed, 97 insertions, 0 deletions
diff --git a/Documentation/mainboard/pcengines/apu1.md b/Documentation/mainboard/pcengines/apu1.md new file mode 100644 index 0000000000..ccadd63a61 --- /dev/null +++ b/Documentation/mainboard/pcengines/apu1.md @@ -0,0 +1,97 @@ +# PC Engines APU1 + +This page describes how to run coreboot on PC Engines APU1 platform. + +## Technology + +```eval_rst ++------------+--------------------------------------------------------+ +| CPU | AMD G series T40E APU | ++------------+--------------------------------------------------------+ +| CPU core | 1 GHz dual core (Bobcat core) with 64 bit support | +| | 32K data + 32K instruction + 512KB L2 cache per core | ++------------+--------------------------------------------------------+ +| DRAM | 2 or 4 GB DDR3-1066 DRAM | ++------------+--------------------------------------------------------+ +| Boot | From SD card, USB, mSATA, SATA | ++------------+--------------------------------------------------------+ +| Power | 6 to 12W of 12V power | ++------------+--------------------------------------------------------+ +| Firmware | coreboot with support for iPXE and USB boot | ++------------+--------------------------------------------------------+ +``` + +## Flashing coreboot + +```eval_rst ++---------------------+--------------------------+ +| Type | Value | ++=====================+==========================+ +| Socketed flash | no | ++---------------------+--------------------------+ +| Model | MX25L1606E | ++---------------------+--------------------------+ +| Size | 2 MiB | ++---------------------+--------------------------+ +| Package | SOP-8 | ++---------------------+--------------------------+ +| Write protection | jumper on WP# pin | ++---------------------+--------------------------+ +| Dual BIOS feature | no | ++---------------------+--------------------------+ +| Internal flashing | yes | ++---------------------+--------------------------+ +``` + +### Internal programming + +The SPI flash can be accessed using [flashrom]. It is important to execute +command with a `-c <chipname>` argument: + + flashrom -p internal -c "MX25L1606E" -w coreboot.rom + +### External programming + +**IMPORTANT**: When programming SPI flash, first you need to enter apu1 in S5 +(Soft-off) power state. S5 state can be forced by shorting power button pin on +J2 header. + +The external access to flash chip is available through standard SOP-8 clip or +SOP-8 header next to the flash chip on the board. Notice that not all boards +have a header soldered down originally. Hence, there could be an empty slot with +8 eyelets, so you can solder down a header on your own. The SPI flash chip and +SPI header are marked in the picture below. Also there is SPI header pin layout +included. Notice, that signatures at the schematic can be ambiguous: +- J12 SPIDI = U35 SO = MISO +- J12 SPIDO = U35 SI = MOSI + +There is no restrictions as to the programmer device. It is only recommended to +flash firmware without supplying power. External programming can be performed, +for example using OrangePi and Armbian. You can exploit linux_spi driver which +provide communication with SPI devices. Example command to program SPI flash +with OrangePi using linux_spi: + + flashrom -w coreboot.rom -p linux_spi:dev=/dev/spidev1.0,spispeed=16000 -c + "MX25L1606E" + + +**apu1 platform with marked in SPI header and SPI flash chip** + +![][apu1c1_flash] + +**SPI header pin layout** + +![][spi_header] + + +### Schematics + +PC Engines APU platform schematics are available for free on PC Engines official +site. Depending on the configuration: +[apu1c](https://www.pcengines.ch/schema/apu1c.pdf) and +[apu1d](https://www.pcengines.ch/schema/apu1d.pdf). + + +[apu1c1_flash]: apu1c1.jpg +[spi_header]: apu1_spi.jpg +[flashrom]: https://flashrom.org/Flashrom diff --git a/Documentation/mainboard/pcengines/apu1_spi.jpg b/Documentation/mainboard/pcengines/apu1_spi.jpg Binary files differnew file mode 100644 index 0000000000..0746733c98 --- /dev/null +++ b/Documentation/mainboard/pcengines/apu1_spi.jpg diff --git a/Documentation/mainboard/pcengines/apu1c1.jpg b/Documentation/mainboard/pcengines/apu1c1.jpg Binary files differnew file mode 100644 index 0000000000..7ecb41a352 --- /dev/null +++ b/Documentation/mainboard/pcengines/apu1c1.jpg |
