summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/releases/coreboot-4.12-relnotes.md63
1 files changed, 63 insertions, 0 deletions
diff --git a/Documentation/releases/coreboot-4.12-relnotes.md b/Documentation/releases/coreboot-4.12-relnotes.md
index 7943aa7161..b172c4a92e 100644
--- a/Documentation/releases/coreboot-4.12-relnotes.md
+++ b/Documentation/releases/coreboot-4.12-relnotes.md
@@ -10,6 +10,69 @@ notes.
* The chip and board additions and removals will be updated right
before the release, so those do not need to be added.
+Deprecations
+------------
+
+For the 4.12 release a few features on x86 became mandatory. These are
+relocatable ramstage, postcar stage and C_ENVIRONMENT_BOOTBLOCK.
+
+### Relocatable ramstage
+
+Relocatable stages are a feature implemented only on x86, where stages
+can be relocated at runtime. This is used to place ramstage in a better
+location that does not collide with memory the OS or the payload tends
+to use. The rationale behind making this mandatory is that you always
+want cbmem to be cached so it's a good location to run ramstage from.
+It avoids using lower memory altogether so the OS can make use of it
+and no backing up needs to happen on S3 resume.
+
+### Postcar stage
+
+With Postcar stage tearing down Cache-as-Ram is done in a separate
+stage. This means that romstage has a clean program boundary and
+that all variables in romstage can be accessed via their linked
+addresses without runtime resolution. There is no need to link
+global and static variables via the CAR\_GLOBAL macro and no need
+to access them with car\_set/get\_var/ptr functions.
+
+### C\_ENVIRONMENT\_BOOTBLOCK
+
+Historically the bootblock on x86 platforms has been compiled with
+romcc. This means that the generated code only uses CPU registers
+and therefore no stack. This 20K+ LOC compiler is limited and hard
+to maintain and so is the code that one has to write in that
+environment. A different solution is to set up Cache-as-Ram in the
+bootblock and run GCC compiled code in the bootblock. The advantages
+are increased flexibility and consistency with other architectures as
+well as other stages: e.g. printing to console is possible and
+VBOOT can run before romstage, making romstage updatable via RW FMAP
+regions.
+
+### Platforms dropped from master
+
+The following platforms did not implement those feature are dropped
+from master to allow the master branch to move on:
+- AMDFAM10
+- all FSP1.0 platforms: BROADWELL_DE, FSP_BAYTRAIL, RANGELEY
+- VIA VX900
+- TODO (AMD?)
+
+In particular on FSP1.0 it is impossible to implement POSTCAR stage.
+The reason is that FSP1.0 relocates the CAR region to the HOB before
+returning to coreboot. This means that after FSP returns to coreboot
+accessing variables via their original address is not possible. One
+way of obtaining that behavior would be to set up Cache-as-Ram again
+(but with open source code) and copy the relocated data from the HOB
+there. This solution is deemed too hacky. Maybe a lesson can be
+learned from this: blobs should not interfere with the execution
+environment, as this makes proper integration much harder.
+
+### 4.11_branch
+
+Given that some platforms supported by FSP1.0 are being produced and
+popular, the 4.11 release was made into a branch in which further
+development can happen.
+
Significant changes
-------------------