diff options
Diffstat (limited to 'payloads')
| -rw-r--r-- | payloads/libpayload/drivers/usb/usbhub.c | 158 |
1 files changed, 148 insertions, 10 deletions
diff --git a/payloads/libpayload/drivers/usb/usbhub.c b/payloads/libpayload/drivers/usb/usbhub.c index 78643c0e70..87c58169c5 100644 --- a/payloads/libpayload/drivers/usb/usbhub.c +++ b/payloads/libpayload/drivers/usb/usbhub.c @@ -35,15 +35,39 @@ /* assume that host_to_device is overwritten if necessary */ #define DR_PORT gen_bmRequestType(host_to_device, class_type, other_recp) /* status (and status change) bits */ -#define PORT_CONNECTION 0x1 -#define PORT_ENABLE 0x2 -#define PORT_RESET 0x10 +#define PORT_CONNECTION 0x01 +#define PORT_ENABLE 0x02 +#define PORT_SUSPEND 0x04 +#define PORT_OVER_CURRENT 0x08 +#define PORT_RESET 0x10 +#define BH_PORT_RESET 0x20 +#define PORT_LINK_STATE 0x40 +#define PORT_CONFIG_ERROR 0x80 /* feature selectors (for setting / clearing features) */ -#define SEL_PORT_RESET 0x4 -#define SEL_PORT_POWER 0x8 -#define SEL_C_PORT_CONNECTION 0x10 +#define SEL_PORT_RESET 0x04 +#define SEL_PORT_POWER 0x08 +#define SEL_C_PORT_CONNECTION 0x10 +#define SEL_C_PORT_ENABLE 0x11 +#define SEL_C_PORT_SUSPEND 0x12 +#define SEL_C_PORT_OVER_CURRENT 0x13 +#define SEL_C_PORT_RESET 0x14 +#define SEL_C_PORT_LINK_STATE 0x19 +#define SEL_C_PORT_CONFIG_ERROR 0x1a +#define SEL_C_BH_PORT_RESET 0x1d /* request type (USB 3.0 hubs only) */ -#define SET_HUB_DEPTH 12 +#define SET_HUB_DEPTH 12 + +static endpoint_t * +usb_hub_interrupt_ep(usbdev_t *const dev) +{ + int i; + for (i = 0; i < dev->num_endp; ++i) { + if (dev->endpoints[i].type == INTERRUPT && + dev->endpoints[i].direction == IN) + return &dev->endpoints[i]; + } + return NULL; +} static int usb_hub_port_status_changed(usbdev_t *const dev, const int port) @@ -169,13 +193,99 @@ usb_hub_port_initialize(usbdev_t *const dev, const int port) return; if (buf[1] & PORT_CONNECTION) clear_feature(dev, port, SEL_C_PORT_CONNECTION, DR_PORT); - if (buf[0] & PORT_CONNECTION) + if (buf[0] & PORT_CONNECTION) { + usb_debug("usbhub: Port coldplug at %d\n", port); generic_hub_scanport(dev, port); + } +} + +static int +usb_hub_handle_port_change(usbdev_t *const dev, const int port) +{ + static const struct { + unsigned short change_bit; + unsigned short clear_sel; + } change_bits[] = { + { PORT_CONNECTION, SEL_C_PORT_CONNECTION }, + { PORT_ENABLE, SEL_C_PORT_ENABLE }, + { PORT_SUSPEND, SEL_C_PORT_SUSPEND }, + { PORT_OVER_CURRENT, SEL_C_PORT_OVER_CURRENT }, + { PORT_RESET, SEL_C_PORT_RESET }, + { BH_PORT_RESET, SEL_C_BH_PORT_RESET }, + { PORT_LINK_STATE, SEL_C_PORT_LINK_STATE }, + { PORT_CONFIG_ERROR, SEL_C_PORT_CONFIG_ERROR }, + }; + int ret = 0; + unsigned int i; + unsigned short checked_bits = 0; + unsigned short buf[2] = { 0, 0 }; + + ret = get_status(dev, port, DR_PORT, sizeof(buf), buf); + if (ret < 0) + return ret; + + /* + * Second word holds the change bits. The interrupt transfer shows + * a logical or of these bits, so we have to clear them all. + */ + for (i = 0; i < ARRAY_SIZE(change_bits); ++i) { + if (buf[1] & change_bits[i].change_bit) + clear_feature(dev, port, change_bits[i].clear_sel, DR_PORT); + checked_bits |= change_bits[i].change_bit; + } + if (buf[1] & ~checked_bits) + usb_debug("usbhub: Spurious change bit at port %d\n", port); + + /* Now, handle connection changes. */ + if (buf[1] & PORT_CONNECTION) { + usb_debug("usbhub: Port change at %d\n", port); + ret = generic_hub_scanport(dev, port); + } + return ret; +} + +static void +usb_hub_poll(usbdev_t *const dev) +{ + unsigned int port, i; + u8 buf[32] = { 0 }; + const u8 *ibuf; + + /* First, gather all change bits from finished interrupt transfers. */ + const size_t port_bytes = MIN(ARRAY_SIZE(buf), + div_round_up(GEN_HUB(dev)->num_ports + 1, 8)); + while ((ibuf = dev->controller->poll_intr_queue(GEN_HUB(dev)->data))) { + for (i = 0; i < port_bytes; ++i) + buf[i] |= ibuf[i]; + } + + for (port = 1; port <= GEN_HUB(dev)->num_ports; ++port) { + /* ports start at bit1; bit0 is hub status change */ + if (buf[port / 8] & (1 << (port % 8))) { + if (usb_hub_handle_port_change(dev, port) < 0) + return; + } + } +} + +static void +usb_hub_destroy(usbdev_t *const dev) +{ + endpoint_t *const intr_ep = usb_hub_interrupt_ep(dev); + dev->controller->destroy_intr_queue(intr_ep, GEN_HUB(dev)->data); + generic_hub_destroy(dev); } void usb_hub_init(usbdev_t *const dev) { + endpoint_t *const intr_ep = usb_hub_interrupt_ep(dev); + if (!intr_ep) { + usb_debug("usbhub: ERROR: No interrupt-in endpoint found\n"); + return; + } + + /* Get number of ports from hub decriptor */ int type = is_usb_speed_ss(dev->speed) ? 0x2a : 0x29; /* similar enough */ hub_descriptor_t desc; /* won't fit the whole thing, we don't care */ if (get_descriptor(dev, gen_bmRequestType(device_to_host, class_type, @@ -187,10 +297,38 @@ usb_hub_init(usbdev_t *const dev) if (is_usb_speed_ss(dev->speed)) usb_hub_set_hub_depth(dev); - if (generic_hub_init(dev, desc.bNbrPorts, &usb_hub_ops) < 0) + + /* + * Register interrupt transfer: + * one bit per port + one bit for the hub, + * 20 transfers in the queue, like our HID driver, + * one transfer per 256ms + */ + void *const intrq = dev->controller->create_intr_queue( + intr_ep, intr_ep->maxpacketsize, 20, 256); + if (!intrq) { + usb_detach_device(dev->controller, dev->address); + return; + } + + /* + * Limit the number of ports by the max packet size of + * the interrupt endpoint. This shouldn't be necessary + * but prevents a potential overflow in usb_hub_poll(). + */ + const unsigned int num_ports = + MIN(desc.bNbrPorts, intr_ep->maxpacketsize * 8 - 1); + if (generic_hub_init(dev, num_ports, &usb_hub_ops)) { + dev->controller->destroy_intr_queue(intr_ep, intrq); + usb_detach_device(dev->controller, dev->address); return; + } int port; - for (port = 1; port <= GEN_HUB(dev)->num_ports; ++port) + for (port = 1; port <= num_ports; ++port) usb_hub_port_initialize(dev, port); + + GEN_HUB(dev)->data = intrq; + dev->poll = usb_hub_poll; + dev->destroy = usb_hub_destroy; } |