diff options
Diffstat (limited to 'src/cpu/intel/car/p4-netburst')
| -rw-r--r-- | src/cpu/intel/car/p4-netburst/cache_as_ram.S | 376 | ||||
| -rw-r--r-- | src/cpu/intel/car/p4-netburst/exit_car.S | 45 |
2 files changed, 421 insertions, 0 deletions
diff --git a/src/cpu/intel/car/p4-netburst/cache_as_ram.S b/src/cpu/intel/car/p4-netburst/cache_as_ram.S new file mode 100644 index 0000000000..58782b941d --- /dev/null +++ b/src/cpu/intel/car/p4-netburst/cache_as_ram.S @@ -0,0 +1,376 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com> + * Copyright (C) 2005 Tyan (written by Yinghai Lu for Tyan) + * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (C) 2012 Kyösti Mälkki <kyosti.malkki@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <cpu/x86/mtrr.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/post_code.h> +#include <cpu/x86/lapic_def.h> + +/* Macro to access Local APIC registers at default base. */ +#define LAPIC(x) $(LAPIC_DEFAULT_BASE | LAPIC_ ## x) +#define START_IPI_VECTOR ((CONFIG_AP_SIPI_VECTOR >> 12) & 0xff) + +#define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE +#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE + +.code32 +_cache_as_ram_setup: + + /* Save the BIST result. */ + movl %eax, %ebp + +cache_as_ram: + post_code(0x20) + + movl $LAPIC_BASE_MSR, %ecx + rdmsr + andl $LAPIC_BASE_MSR_BOOTSTRAP_PROCESSOR, %eax + jz ap_init + + /* Clear/disable fixed MTRRs */ + mov $fixed_mtrr_list_size, %ebx + xor %eax, %eax + xor %edx, %edx + +clear_fixed_mtrr: + add $-2, %ebx + movzwl fixed_mtrr_list(%ebx), %ecx + wrmsr + jnz clear_fixed_mtrr + + /* Figure put how many MTRRs we have, and clear them out */ + mov $MTRR_CAP_MSR, %ecx + rdmsr + movzb %al, %ebx /* Number of variable MTRRs */ + mov $MTRR_PHYS_BASE(0), %ecx + xor %eax, %eax + xor %edx, %edx + +clear_var_mtrr: + wrmsr + inc %ecx + wrmsr + inc %ecx + dec %ebx + jnz clear_var_mtrr + post_code(0x21) + + /* Configure the default memory type to uncacheable. */ + movl $MTRR_DEF_TYPE_MSR, %ecx + rdmsr + andl $(~0x00000cff), %eax + wrmsr + + post_code(0x22) + + /* Determine CPU_ADDR_BITS and load PHYSMASK high + * word to %edx. + */ + movl $0x80000000, %eax + cpuid + cmpl $0x80000008, %eax + jc addrsize_no_MSR + movl $0x80000008, %eax + cpuid + movb %al, %cl + sub $32, %cl + movl $1, %edx + shl %cl, %edx + subl $1, %edx + jmp addrsize_set_high +addrsize_no_MSR: + movl $1, %eax + cpuid + andl $(1 << 6 | 1 << 17), %edx /* PAE or PSE36 */ + jz addrsize_set_high + movl $0x0f, %edx + + /* Preload high word of address mask (in %edx) for Variable + * MTRRs 0 and 1 and enable local APIC at default base. + */ +addrsize_set_high: + xorl %eax, %eax + movl $MTRR_PHYS_MASK(0), %ecx + wrmsr + movl $MTRR_PHYS_MASK(1), %ecx + wrmsr + movl $LAPIC_BASE_MSR, %ecx + not %edx + movl %edx, %ebx + rdmsr + andl %ebx, %edx + andl $(~LAPIC_BASE_MSR_ADDR_MASK), %eax + orl $(LAPIC_DEFAULT_BASE | LAPIC_BASE_MSR_ENABLE), %eax + wrmsr + +bsp_init: + + post_code(0x23) + + /* Send INIT IPI to all excluding ourself. */ + movl LAPIC(ICR), %edi + movl $(LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT | LAPIC_DM_INIT), %eax +1: movl %eax, (%edi) + movl $0x30, %ecx +2: pause + dec %ecx + jnz 2b + movl (%edi), %ecx + andl $LAPIC_ICR_BUSY, %ecx + jnz 1b + + post_code(0x24) + + movl $1, %eax + cpuid + btl $28, %edx + jnc sipi_complete + bswapl %ebx + movzx %bh, %edi + cmpb $1, %bh + jbe sipi_complete /* only one LAPIC ID in package */ + + movl $0, %eax + cpuid + movb $1, %bl + cmpl $4, %eax + jb cores_counted + movl $4, %eax + movl $0, %ecx + cpuid + shr $26, %eax + movb %al, %bl + inc %bl + +cores_counted: + movl %edi, %eax + divb %bl + cmpb $1, %al + jbe sipi_complete /* only LAPIC ID of a core */ + + /* For a hyper-threading processor, cache must not be disabled + * on an AP on the same physical package with the BSP. + */ + +hyper_threading_cpu: + + /* delay 10 ms */ + movl $10000, %ecx +1: inb $0x80, %al + dec %ecx + jnz 1b + + post_code(0x25) + + /* Send Start IPI to all excluding ourself. */ + movl LAPIC(ICR), %edi + movl $(LAPIC_DEST_ALLBUT | LAPIC_DM_STARTUP | START_IPI_VECTOR), %eax +1: movl %eax, (%edi) + movl $0x30, %ecx +2: pause + dec %ecx + jnz 2b + movl (%edi), %ecx + andl $LAPIC_ICR_BUSY, %ecx + jnz 1b + + /* delay 250 us */ + movl $250, %ecx +1: inb $0x80, %al + dec %ecx + jnz 1b + + post_code(0x26) + + /* Wait for sibling CPU to start. */ +1: movl $(MTRR_PHYS_BASE(0)), %ecx + rdmsr + andl %eax, %eax + jnz sipi_complete + + movl $0x30, %ecx +2: pause + dec %ecx + jnz 2b + jmp 1b + + +ap_init: + post_code(0x27) + + /* Do not disable cache (so BSP can enable it). */ + movl %cr0, %eax + andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax + movl %eax, %cr0 + + post_code(0x28) + + /* MTRR registers are shared between HT siblings. */ + movl $(MTRR_PHYS_BASE(0)), %ecx + movl $(1 << 12), %eax + xorl %edx, %edx + wrmsr + + post_code(0x29) + +ap_halt: + cli +1: hlt + jmp 1b + + + +sipi_complete: + + post_code(0x2a) + + /* Set Cache-as-RAM base address. */ + movl $(MTRR_PHYS_BASE(0)), %ecx + movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax + xorl %edx, %edx + wrmsr + + /* Set Cache-as-RAM mask. */ + movl $(MTRR_PHYS_MASK(0)), %ecx + rdmsr + movl $(~(CACHE_AS_RAM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax + wrmsr + + post_code(0x2b) + + /* Enable MTRR. */ + movl $MTRR_DEF_TYPE_MSR, %ecx + rdmsr + orl $MTRR_DEF_TYPE_EN, %eax + wrmsr + + /* Enable L2 cache Write-Back (WBINVD and FLUSH#). + * + * MSR is set when DisplayFamily_DisplayModel is one of: + * 06_0x, 06_17, 06_1C + * + * Description says this bit enables use of WBINVD and FLUSH#. + * Should this be set only after the system bus and/or memory + * controller can successfully handle write cycles? + */ + +#define EAX_FAMILY(a) (a << 8) /* for family <= 0fH */ +#define EAX_MODEL(a) (((a & 0xf0) << 12) | ((a & 0xf) << 4)) + + movl $1, %eax + cpuid + movl %eax, %ebx + andl $EAX_FAMILY(0x0f), %eax + cmpl $EAX_FAMILY(0x06), %eax + jne no_msr_11e + movl %ebx, %eax + andl $EAX_MODEL(0xff), %eax + cmpl $EAX_MODEL(0x17), %eax + je has_msr_11e + cmpl $EAX_MODEL(0x1c), %eax + je has_msr_11e + andl $EAX_MODEL(0xf0), %eax + cmpl $EAX_MODEL(0x00), %eax + jne no_msr_11e +has_msr_11e: + movl $0x11e, %ecx + rdmsr + orl $(1 << 8), %eax + wrmsr +no_msr_11e: + + post_code(0x2c) + + /* Enable cache (CR0.CD = 0, CR0.NW = 0). */ + movl %cr0, %eax + andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax + invd + movl %eax, %cr0 + + /* Clear the cache memory region. This will also fill up the cache. */ + cld + xorl %eax, %eax + movl $CACHE_AS_RAM_BASE, %edi + movl $(CACHE_AS_RAM_SIZE >> 2), %ecx + rep stosl + + post_code(0x2d) + /* Enable Cache-as-RAM mode by disabling cache. */ + movl %cr0, %eax + orl $CR0_CacheDisable, %eax + movl %eax, %cr0 + + /* Enable cache for our code in Flash because we do XIP here */ + movl $MTRR_PHYS_BASE(1), %ecx + xorl %edx, %edx + /* + * IMPORTANT: The following calculation _must_ be done at runtime. See + * https://www.coreboot.org/pipermail/coreboot/2010-October/060855.html + */ + movl $copy_and_run, %eax + andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax + orl $MTRR_TYPE_WRPROT, %eax + wrmsr + + movl $MTRR_PHYS_MASK(1), %ecx + rdmsr + movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax + wrmsr + + post_code(0x2e) + /* Enable cache. */ + movl %cr0, %eax + andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax + movl %eax, %cr0 + + /* Setup the stack. */ + movl $(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE), %eax + movl %eax, %esp + + /* Restore the BIST result. */ + movl %ebp, %eax + movl %esp, %ebp + pushl %eax + +before_romstage: + post_code(0x2f) + /* Call romstage.c main function. */ + call romstage_main + + /* Should never see this postcode */ + post_code(POST_DEAD_CODE) + +.Lhlt: + hlt + jmp .Lhlt + +fixed_mtrr_list: + .word MTRR_FIX_64K_00000 + .word MTRR_FIX_16K_80000 + .word MTRR_FIX_16K_A0000 + .word MTRR_FIX_4K_C0000 + .word MTRR_FIX_4K_C8000 + .word MTRR_FIX_4K_D0000 + .word MTRR_FIX_4K_D8000 + .word MTRR_FIX_4K_E0000 + .word MTRR_FIX_4K_E8000 + .word MTRR_FIX_4K_F0000 + .word MTRR_FIX_4K_F8000 +fixed_mtrr_list_size = . - fixed_mtrr_list + +_cache_as_ram_setup_end: diff --git a/src/cpu/intel/car/p4-netburst/exit_car.S b/src/cpu/intel/car/p4-netburst/exit_car.S new file mode 100644 index 0000000000..3b991288ff --- /dev/null +++ b/src/cpu/intel/car/p4-netburst/exit_car.S @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com> + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <cpu/x86/mtrr.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/post_code.h> + +.code32 +.global chipset_teardown_car + +chipset_teardown_car: + pop %esp + + post_code(0x30) + + /* Disable cache. */ + movl %cr0, %eax + orl $CR0_CacheDisable, %eax + movl %eax, %cr0 + + post_code(0x31) + + /* Disable MTRR. */ + movl $MTRR_DEF_TYPE_MSR, %ecx + rdmsr + andl $(~MTRR_DEF_TYPE_EN), %eax + wrmsr + + post_code(0x32) + + /* Return to caller. */ + jmp *%esp |