diff options
Diffstat (limited to 'src/cpu/intel/fsp_model_206ax/cache_as_ram.inc')
| -rw-r--r-- | src/cpu/intel/fsp_model_206ax/cache_as_ram.inc | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/src/cpu/intel/fsp_model_206ax/cache_as_ram.inc b/src/cpu/intel/fsp_model_206ax/cache_as_ram.inc new file mode 100644 index 0000000000..a8d7cc54cb --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/cache_as_ram.inc @@ -0,0 +1,292 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com> + * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <cpu/x86/stack.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/post_code.h> +#include <cbmem.h> + +#define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE +#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE + +#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1) +#define LHLT_DELAY 0x50000 /* delay between post codes on FSP failure */ +#define NoEvictMod_MSR 0x2e0 + +cache_as_ram: + post_code(0x20) + + /* Send INIT IPI to all excluding ourself. */ + movl $0x000C4500, %eax + movl $0xFEE00300, %esi + movl %eax, (%esi) + + /* All CPUs need to be in Wait for SIPI state */ +wait_for_sipi: + movl (%esi), %eax + bt $12, %eax + jc wait_for_sipi + + post_code(0x21) + /* Zero out all fixed range and variable range MTRRs. */ + movl $mtrr_table, %esi + movl $((mtrr_table_end - mtrr_table) / 2), %edi + xorl %eax, %eax + xorl %edx, %edx +clear_mtrrs: + movw (%esi), %bx + movzx %bx, %ecx + wrmsr + add $2, %esi + dec %edi + jnz clear_mtrrs + + /* Init floating point */ + emms + fninit + + /* + * Find the FSP binary in cbfs. + * Make a fake stack that has the return value back to this code. + */ + lea fake_fsp_stack, %esp + jmp find_fsp +find_fsp_ret: + /* Save the FSP location */ + mov %eax, %ebp + cmp $CONFIG_FSP_LOC, %eax + jb halt1 + + post_code(0x22) + + /* Calculate entry into FSP */ + mov 0x30(%ebp), %eax /* Load TempRamInitEntry */ + add 0x1c(%ebp), %eax /* add in the offset for the FSP base address */ + + /* + * Pass early init variables on a fake stack (no memory yet) + * as well as the return location + */ + lea CAR_init_stack, %esp + + /* call FSP binary to setup temporary stack */ + jmp *%eax + +CAR_init_done: + addl $4, %esp + cmp $0, %eax + jne halt2 + + /* Save FSP_INFO_HEADER location in ebx */ + mov %ebp, %ebx + + /* + * setup bootloader stack + * ecx: stack base + * edx: stack top + */ + lea -4(%edx), %esp + movl %esp, %ebp + +before_romstage: + post_code(0x23) + + /* Call romstage.c main function. */ + pushl %ebx + call main + +romstage_main_return: + post_code(0x2f) + +/* Disable cache. */ + movl %cr0, %eax + orl $CR0_CacheDisable, %eax + movl %eax, %cr0 + + post_code(0x31) + + /* Disable MTRR. */ + movl $MTRRdefType_MSR, %ecx + rdmsr + andl $(~MTRRdefTypeEn), %eax + wrmsr + + post_code(0x32) + + /* Zero out all fixed range and variable range MTRRs. */ + movl $mtrr_table, %esi + movl $((mtrr_table_end - mtrr_table) / 2), %edi + xorl %eax, %eax + xorl %edx, %edx +_clear_mtrrs_: + movw (%esi), %bx + movzx %bx, %ecx + wrmsr + add $2, %esi + dec %edi + jnz _clear_mtrrs_ + + post_code(0x33) + + /* Enable cache. */ + movl %cr0, %eax + andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax + movl %eax, %cr0 + + post_code(0x36) + + /* Disable cache. */ + movl %cr0, %eax + orl $CR0_CacheDisable, %eax + movl %eax, %cr0 + + post_code(0x38) + + /* Enable Write Back and Speculative Reads for the first MB + * and coreboot_ram. + */ + movl $MTRRphysBase_MSR(0), %ecx + movl $(0x00000000 | MTRR_TYPE_WRBACK), %eax + xorl %edx, %edx + wrmsr + movl $MTRRphysMask_MSR(0), %ecx + movl $(~(CONFIG_RAMTOP - 1) | MTRRphysMaskValid), %eax + movl $CPU_PHYSMASK_HI, %edx // 36bit address space + wrmsr + +#if CONFIG_CACHE_ROM_SIZE + /* Enable Caching and speculative Reads for the + * complete ROM now that we actually have RAM. + */ + movl $MTRRphysBase_MSR(1), %ecx + movl $(CACHE_ROM_BASE | MTRR_TYPE_WRPROT), %eax + xorl %edx, %edx + wrmsr + movl $MTRRphysMask_MSR(1), %ecx + movl $(~(CONFIG_CACHE_ROM_SIZE - 1) | MTRRphysMaskValid), %eax + movl $CPU_PHYSMASK_HI, %edx + wrmsr +#endif + + post_code(0x39) + + /* And enable cache again after setting MTRRs. */ + movl %cr0, %eax + andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax + movl %eax, %cr0 + + post_code(0x3a) + + /* Enable MTRR. */ + movl $MTRRdefType_MSR, %ecx + rdmsr + orl $MTRRdefTypeEn, %eax + wrmsr + + post_code(0x3d) + + /* Clear boot_complete flag. */ + xorl %ebp, %ebp +__main: + post_code(POST_PREPARE_RAMSTAGE) + cld /* Clear direction flag. */ + + movl %ebp, %esi + + movl $ROMSTAGE_STACK, %esp + movl %esp, %ebp + pushl %esi + call copy_and_run + +halt1: + /* + * Failures for postcode 0xBA - failed in find_fsp() + * + * Values are: + * 0x01 - FV signature, "_FVH" not present + * 0x02 - FFS GUID not present + * 0x03 - FSP INFO Header not found + * 0x04 - ImageBase does not equal CONFIG_FSP_LOC - Is the FSP rebased to + * a different location, or does it need to be? + * 0x05 - FSP INFO Header signature "FSPH" not found + * 0x06 - FSP Image ID is not the expected ID. + * For ivybridge_bd82x6x, the ID is expected to be 'CC2-FSP\0' + * For ivybridge_i89xx, the ID is expected to be 'ST2-FSP\0' + * + */ + movb $0xBA, %ah + jmp .Lhlt + +halt2: + /* + * Failures for postcode 0xBB - failed in the FSP: + * + * 0x00 - FSP_SUCCESS: Temp RAM was initialized successfully. + * 0x02 - FSP_INVALID_PARAMETER: Input parameters are invalid. + * 0x0E - FSP_NOT_FOUND: No valid microcode was found in the microcode region. + * 0x03 - FSP_UNSUPPORTED: The FSP calling conditions were not met. + * 0x07 - FSP_DEVICE_ERROR: Temp RAM initialization failed + * 0x14 - FSP_ALREADY_STARTED: Temp RAM initialization has been invoked + */ + movb $0xBB, %ah + +.Lhlt: + xchg %al, %ah +#if CONFIG_IO_POST + outb %al, $CONFIG_IO_POST_PORT +#else + post_code(POST_DEAD_CODE) +#endif + movl $LHLT_DELAY, %ecx +.Lhlt_Delay: + outb %al, $0xED + loop .Lhlt_Delay + jmp .Lhlt + + .align 4 +fake_fsp_stack: + .long find_fsp_ret + +CAR_init_params: + .long CONFIG_CPU_MICROCODE_CBFS_LOC + .long CONFIG_CPU_MICROCODE_CBFS_LEN /* Microcode Length */ + .long 0xFFFFFFFF - CONFIG_ROM_SIZE + 1 /* Firmware Location */ + .long CONFIG_ROM_SIZE /* Total Firmware Length */ + +CAR_init_stack: + .long CAR_init_done + .long CAR_init_params + +mtrr_table: + /* Fixed MTRRs */ + .word 0x250, 0x258, 0x259 + .word 0x268, 0x269, 0x26A + .word 0x26B, 0x26C, 0x26D + .word 0x26E, 0x26F + /* Variable MTRRs */ + .word 0x200, 0x201, 0x202, 0x203 + .word 0x204, 0x205, 0x206, 0x207 + .word 0x208, 0x209, 0x20A, 0x20B + .word 0x20C, 0x20D, 0x20E, 0x20F +/* .word 0x210, 0x211, 0x212, 0x213 */ +mtrr_table_end: + |