diff options
Diffstat (limited to 'src/cpu/samsung/exynos5250/clock_init.c')
| -rw-r--r-- | src/cpu/samsung/exynos5250/clock_init.c | 36 |
1 files changed, 34 insertions, 2 deletions
diff --git a/src/cpu/samsung/exynos5250/clock_init.c b/src/cpu/samsung/exynos5250/clock_init.c index 421d880fa7..53bab1a53a 100644 --- a/src/cpu/samsung/exynos5250/clock_init.c +++ b/src/cpu/samsung/exynos5250/clock_init.c @@ -597,6 +597,38 @@ static int autodetect_memory(void) #ifdef CONFIG_SPL_BUILD +#define SIGNATURE 0xdeadbeef + +/* Parameters of early board initialization in SPL */ +static struct spl_machine_param machine_param = { + .signature = SIGNATURE, + .version = 1, + .params = "vmubfasirMw", + .size = sizeof(machine_param), + + .mem_iv_size = 0x1f, + .mem_type = DDR_MODE_DDR3, + + /* + * Set uboot_size to 0x100000 bytes. + * + * This is an overly conservative value chosen to accommodate all + * possible U-Boot image. You are advised to set this value to a + * smaller realistic size via scripts that modifies the .machine_param + * section of output U-Boot image. + */ + .uboot_size = 0x100000, + + .boot_source = BOOT_MODE_OM, + .frequency_mhz = 800, + .arm_freq_mhz = 1700, + .serial_base = 0x12c30000, + .i2c_base = 0x12c60000, +// .board_rev_gpios = GPIO_D00 | (GPIO_D01 << 16), + .mem_manuf = MEM_MANUF_SAMSUNG, +// .bad_wake_gpio = GPIO_Y10, +}; + /** * Get the required memory type and speed (SPL version). * @@ -608,7 +640,7 @@ int clock_get_mem_selection(enum ddr_mode *mem_type, { struct spl_machine_param *params; - params = spl_get_machine_params(); + params = &machine_param; *mem_type = params->mem_type; *frequency_mhz = params->frequency_mhz; *arm_freq = params->arm_freq_mhz; @@ -719,7 +751,7 @@ struct arm_clk_ratios *get_arm_ratios(void) return arm_ratio; } - die("get_arm_ratios: Failed to find ratio\n"); +// die("get_arm_ratios: Failed to find ratio\n"); return NULL; } |