diff options
Diffstat (limited to 'src/cpu/samsung/exynos5250/gpio.c')
-rw-r--r-- | src/cpu/samsung/exynos5250/gpio.c | 279 |
1 files changed, 0 insertions, 279 deletions
diff --git a/src/cpu/samsung/exynos5250/gpio.c b/src/cpu/samsung/exynos5250/gpio.c deleted file mode 100644 index 2a93328a70..0000000000 --- a/src/cpu/samsung/exynos5250/gpio.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <delay.h> -#include <assert.h> -#include "gpio.h" -#include "cpu.h" - -#define CON_MASK(x) (0xf << ((x) << 2)) -#define CON_SFR(x, v) ((v) << ((x) << 2)) - -#define DAT_MASK(x) (0x1 << (x)) -#define DAT_SET(x) (0x1 << (x)) - -#define PULL_MASK(x) (0x3 << ((x) << 1)) -#define PULL_MODE(x, v) ((v) << ((x) << 1)) - -#define DRV_MASK(x) (0x3 << ((x) << 1)) -#define DRV_SET(x, m) ((m) << ((x) << 1)) -#define RATE_MASK(x) (0x1 << (x + 16)) -#define RATE_SET(x) (0x1 << (x + 16)) - -struct gpio_info { - unsigned int reg_addr; /* Address of register for this part */ - unsigned int max_gpio; /* Maximum GPIO in this part */ -}; - -static const struct gpio_info gpio_data[EXYNOS_GPIO_NUM_PARTS] = { - { EXYNOS5_GPIO_PART1_BASE, GPIO_MAX_PORT_PART_1 }, - { EXYNOS5_GPIO_PART2_BASE, GPIO_MAX_PORT_PART_2 }, - { EXYNOS5_GPIO_PART3_BASE, GPIO_MAX_PORT_PART_3 }, - { EXYNOS5_GPIO_PART4_BASE, GPIO_MAX_PORT_PART_4 }, - { EXYNOS5_GPIO_PART5_BASE, GPIO_MAX_PORT_PART_5 }, - { EXYNOS5_GPIO_PART6_BASE, GPIO_MAX_PORT }, -}; - -/* This macro gets gpio pin offset from 0..7 */ -#define GPIO_BIT(x) ((x) & 0x7) - -static struct gpio_bank *gpio_get_bank(unsigned int gpio) -{ - const struct gpio_info *data; - unsigned int upto; - int i; - - for (i = upto = 0, data = gpio_data; i < EXYNOS_GPIO_NUM_PARTS; - i++, upto = data->max_gpio, data++) { - if (gpio < data->max_gpio) { - struct gpio_bank *bank; - - bank = (struct gpio_bank *)data->reg_addr; - bank += (gpio - upto) / GPIO_PER_BANK; - return bank; - } - } - - ASSERT(gpio < GPIO_MAX_PORT); /* ...which it will not be */ - return NULL; -} - -/* Common GPIO API - only available on Exynos5 */ -void gpio_cfg_pin(int gpio, int cfg) -{ - unsigned int value; - struct gpio_bank *bank = gpio_get_bank(gpio); - - value = readl(&bank->con); - value &= ~CON_MASK(GPIO_BIT(gpio)); - value |= CON_SFR(GPIO_BIT(gpio), cfg); - writel(value, &bank->con); -} - -static int gpio_get_cfg(int gpio) -{ - struct gpio_bank *bank = gpio_get_bank(gpio); - int shift = GPIO_BIT(gpio) << 2; - - return (readl(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift; -} - -void gpio_set_pull(int gpio, int mode) -{ - unsigned int value; - struct gpio_bank *bank = gpio_get_bank(gpio); - - value = readl(&bank->pull); - value &= ~PULL_MASK(GPIO_BIT(gpio)); - - switch (mode) { - case GPIO_PULL_DOWN: - case GPIO_PULL_UP: - value |= PULL_MODE(GPIO_BIT(gpio), mode); - break; - default: - break; - } - - writel(value, &bank->pull); -} - -void gpio_set_drv(int gpio, int mode) -{ - unsigned int value; - struct gpio_bank *bank = gpio_get_bank(gpio); - - value = readl(&bank->drv); - value &= ~DRV_MASK(GPIO_BIT(gpio)); - - switch (mode) { - case GPIO_DRV_1X: - case GPIO_DRV_2X: - case GPIO_DRV_3X: - case GPIO_DRV_4X: - value |= DRV_SET(GPIO_BIT(gpio), mode); - break; - default: - return; - } - - writel(value, &bank->drv); -} - -void gpio_set_rate(int gpio, int mode) -{ - unsigned int value; - struct gpio_bank *bank = gpio_get_bank(gpio); - - value = readl(&bank->drv); - value &= ~RATE_MASK(GPIO_BIT(gpio)); - - switch (mode) { - case GPIO_DRV_FAST: - case GPIO_DRV_SLOW: - value |= RATE_SET(GPIO_BIT(gpio)); - break; - default: - return; - } - - writel(value, &bank->drv); -} - -int gpio_direction_input(unsigned gpio) -{ - gpio_cfg_pin(gpio, GPIO_INPUT); - - return 0; -} - -int gpio_direction_output(unsigned gpio, int value) -{ - unsigned int val; - struct gpio_bank *bank = gpio_get_bank(gpio); - - val = readl(&bank->dat); - val &= ~DAT_MASK(GPIO_BIT(gpio)); - if (value) - val |= DAT_SET(GPIO_BIT(gpio)); - writel(val, &bank->dat); - - gpio_cfg_pin(gpio, GPIO_OUTPUT); - - return 0; -} - -int gpio_get_value(unsigned gpio) -{ - unsigned int value; - struct gpio_bank *bank = gpio_get_bank(gpio); - - value = readl(&bank->dat); - return !!(value & DAT_MASK(GPIO_BIT(gpio))); -} - -int gpio_set_value(unsigned gpio, int value) -{ - unsigned int val; - struct gpio_bank *bank = gpio_get_bank(gpio); - - val = readl(&bank->dat); - val &= ~DAT_MASK(GPIO_BIT(gpio)); - if (value) - val |= DAT_SET(GPIO_BIT(gpio)); - writel(val, &bank->dat); - - return 0; -} - -/* - * Add a delay here to give the lines time to settle - * TODO(sjg): 1us does not always work, 2 is stable, so use 5 to be safe - * Come back to this and sort out what the datasheet says - */ -#define GPIO_DELAY_US 5 - -#ifndef __BOOT_BLOCK__ -/* - * FIXME(dhendrix): These functions use udelay, which has dependencies on - * pwm code and timer code. These aren't necessary for the bootblock and - * bloat the image significantly. - */ -int gpio_read_mvl3(unsigned gpio) -{ - int high, low; - enum mvl3 value; - - if (gpio >= GPIO_MAX_PORT) - return -1; - - gpio_direction_input(gpio); - gpio_set_pull(gpio, GPIO_PULL_UP); - udelay(GPIO_DELAY_US); - high = gpio_get_value(gpio); - gpio_set_pull(gpio, GPIO_PULL_DOWN); - udelay(GPIO_DELAY_US); - low = gpio_get_value(gpio); - - if (high && low) /* external pullup */ - value = LOGIC_1; - else if (!high && !low) /* external pulldown */ - value = LOGIC_0; - else /* floating */ - value = LOGIC_Z; - - /* - * Check if line is externally pulled high and - * configure the internal pullup to match. For - * floating and pulldowns, the GPIO is already - * configured with an internal pulldown from the - * above test. - */ - if (value == LOGIC_1) - gpio_set_pull(gpio, GPIO_PULL_UP); - - return value; -} -#endif /* __BOOT_BLOCK__ */ - -/* - * Display Exynos GPIO information - */ -void gpio_info(void) -{ - unsigned gpio; - - for (gpio = 0; gpio < GPIO_MAX_PORT; gpio++) { - int cfg = gpio_get_cfg(gpio); - - printk(BIOS_INFO, "GPIO_%-3d: ", gpio); - if (cfg == GPIO_INPUT) - printk(BIOS_INFO, "input"); - else if (cfg == GPIO_OUTPUT) - printk(BIOS_INFO, "output"); - else - printk(BIOS_INFO, "func %d", cfg); - - if (cfg == GPIO_INPUT || cfg == GPIO_OUTPUT) - printk(BIOS_INFO, ", value = %d", gpio_get_value(gpio)); - printk(BIOS_INFO, "\n"); - } -} |