1 files changed, 130 insertions, 0 deletions
diff --git a/src/cpu/x86/smm/smiutil.c b/src/cpu/x86/smm/smiutil.c
new file mode 100644
index 0000000000..95453e8224
--- /dev/null
+++ b/src/cpu/x86/smm/smiutil.c
@@ -0,0 +1,130 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/smm.h>
+
+// #define DEBUG_SMI
+
+/* ********************* smi_util ************************* */
+
+/* Data */
+#define UART_RBR 0x00
+#define UART_TBR 0x00
+
+/* Control */
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/* Status */
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+
+#ifndef CONFIG_TTYS0_BASE
+#define CONFIG_TTYS0_BASE 0x3f8
+#endif
+
+#ifndef CONFIG_TTYS0_BAUD
+#define CONFIG_TTYS0_BAUD 115200
+#endif
+
+#ifndef CONFIG_TTYS0_DIV
+#define CONFIG_TTYS0_DIV	(115200/CONFIG_TTYS0_BAUD)
+#endif
+
+/* Line Control Settings */
+#ifndef CONFIG_TTYS0_LCS
+/* Set 8bit, 1 stop bit, no parity */
+#define CONFIG_TTYS0_LCS	0x3
+#endif
+
+#define UART_LCS	CONFIG_TTYS0_LCS
+
+static int uart_can_tx_byte(void)
+{
+	return inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x20;
+}
+
+static void uart_wait_to_tx_byte(void)
+{
+	while(!uart_can_tx_byte()) 
+	;
+}
+
+static void uart_wait_until_sent(void)
+{
+	while(!(inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x40))
+	; 
+}
+
+static void uart_tx_byte(unsigned char data)
+{
+	uart_wait_to_tx_byte();
+	outb(data, CONFIG_TTYS0_BASE + UART_TBR);
+	/* Make certain the data clears the fifos */
+	uart_wait_until_sent();
+}
+
+void console_tx_flush(void)
+{
+	uart_wait_to_tx_byte();
+}
+
+void console_tx_byte(unsigned char byte)
+{
+	if (byte == '\n')
+		uart_tx_byte('\r');
+	uart_tx_byte(byte);
+}
+
+void uart_init(void)
+{
+	/* disable interrupts */
+	outb(0x0, CONFIG_TTYS0_BASE + UART_IER);
+	/* enable fifo's */
+	outb(0x01, CONFIG_TTYS0_BASE + UART_FCR);
+	/* Set Baud Rate Divisor to 12 ==> 115200 Baud */
+	outb(0x80 | UART_LCS, CONFIG_TTYS0_BASE + UART_LCR);
+	outb(CONFIG_TTYS0_DIV & 0xFF,   CONFIG_TTYS0_BASE + UART_DLL);
+	outb((CONFIG_TTYS0_DIV >> 8) & 0xFF,    CONFIG_TTYS0_BASE + UART_DLM);
+	outb(UART_LCS, CONFIG_TTYS0_BASE + UART_LCR);
+}
+
+void console_init(void)
+{
+#ifdef DEBUG_SMI
+	console_loglevel = CONFIG_DEFAULT_CONSOLE_LOGLEVEL;
+	uart_init();
+#else
+	console_loglevel = 1;
+#endif
+}
+
+/* ********************* smi_util ************************* */