summaryrefslogtreecommitdiff
path: root/src/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'src/cpu')
-rw-r--r--src/cpu/allwinner/a10/clock.c12
-rw-r--r--src/cpu/allwinner/a10/gpio.c2
-rw-r--r--src/cpu/allwinner/a10/pinmux.c4
-rw-r--r--src/cpu/allwinner/a10/raminit.c28
-rw-r--r--src/cpu/allwinner/a10/timer.c6
-rw-r--r--src/cpu/allwinner/a10/twi.c14
-rw-r--r--src/cpu/allwinner/a10/uart.c12
-rw-r--r--src/cpu/ti/am335x/pinmux.c158
-rw-r--r--src/cpu/ti/am335x/uart.c52
9 files changed, 144 insertions, 144 deletions
diff --git a/src/cpu/allwinner/a10/clock.c b/src/cpu/allwinner/a10/clock.c
index e7984dd328..c22b24273e 100644
--- a/src/cpu/allwinner/a10/clock.c
+++ b/src/cpu/allwinner/a10/clock.c
@@ -28,7 +28,7 @@ void a1x_periph_clock_enable(enum a1x_clken periph)
addr = (void *)A1X_CCM_BASE + (periph >> 5);
reg32 = read32(addr);
reg32 |= 1 << (periph & 0x1f);
- writel(reg32, addr);
+ write32(addr, reg32);
}
/**
@@ -44,7 +44,7 @@ void a1x_periph_clock_disable(enum a1x_clken periph)
addr = (void *)A1X_CCM_BASE + (periph >> 5);
reg32 = read32(addr);
reg32 &= ~(1 << (periph & 0x1f));
- writel(reg32, addr);
+ write32(addr, reg32);
}
/**
@@ -88,7 +88,7 @@ void a1x_pll5_configure(u8 mul_n, u8 mul_k, u8 div_m, u8 exp_div_p)
reg32 |= (PLL5_FACTOR_M(div_m) | PLL5_FACTOR_N(mul_n) |
PLL5_FACTOR_K(mul_k) | PLL5_DIV_EXP_P(exp_div_p));
reg32 |= PLL5_PLL_ENABLE;
- writel(reg32, &ccm->pll5_cfg);
+ write32(&ccm->pll5_cfg, reg32);
}
/**
@@ -166,7 +166,7 @@ static void cpu_clk_src_switch(u32 clksel_bits)
reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
reg32 &= ~CPU_CLK_SRC_MASK;
reg32 |= clksel_bits & CPU_CLK_SRC_MASK;
- writel(reg32, &ccm->cpu_ahb_apb0_cfg);
+ write32(&ccm->cpu_ahb_apb0_cfg, reg32);
}
static void change_sys_divisors(u8 axi, u8 ahb_exp, u8 apb0_exp)
@@ -179,7 +179,7 @@ static void change_sys_divisors(u8 axi, u8 ahb_exp, u8 apb0_exp)
reg32 |= ((axi - 1) << 0) & AXI_DIV_MASK;
reg32 |= (ahb_exp << 4) & AHB_DIV_MASK;
reg32 |= (apb0_exp << 8) & APB0_DIV_MASK;
- writel(reg32, &ccm->cpu_ahb_apb0_cfg);
+ write32(&ccm->cpu_ahb_apb0_cfg, reg32);
}
static void spin_delay(u32 loops)
@@ -262,7 +262,7 @@ void a1x_set_cpu_clock(u16 cpu_clk_mhz)
change_sys_divisors(axi, ahb_exp, apb0_exp);
/* Configure PLL1 at the desired frequency */
- writel(pll1_table[i].pll1_cfg, &ccm->pll1_cfg);
+ write32(&ccm->pll1_cfg, pll1_table[i].pll1_cfg);
spin_delay(8);
cpu_clk_src_switch(CPU_CLK_SRC_PLL1);
diff --git a/src/cpu/allwinner/a10/gpio.c b/src/cpu/allwinner/a10/gpio.c
index 61f120d714..95854e580c 100644
--- a/src/cpu/allwinner/a10/gpio.c
+++ b/src/cpu/allwinner/a10/gpio.c
@@ -76,7 +76,7 @@ void gpio_write(u8 port, u32 val)
if ((port > GPS))
return;
- writel(val, &gpio->port[port].dat);
+ write32(&gpio->port[port].dat, val);
}
/**
diff --git a/src/cpu/allwinner/a10/pinmux.c b/src/cpu/allwinner/a10/pinmux.c
index d22647fc70..f5ed19a69a 100644
--- a/src/cpu/allwinner/a10/pinmux.c
+++ b/src/cpu/allwinner/a10/pinmux.c
@@ -33,7 +33,7 @@ void gpio_set_pin_func(u8 port, u8 pin, u8 pad_func)
reg32 = read32(&gpio->port[port].cfg[reg]);
reg32 &= ~(0xf << bit);
reg32 |= (pad_func & 0xf) << bit;
- writel(reg32, &gpio->port[port].cfg[reg]);
+ write32(&gpio->port[port].cfg[reg], reg32);
}
/**
@@ -74,6 +74,6 @@ void gpio_set_multipin_func(u8 port, u32 pin_mask, u8 pad_func)
reg32 &= ~(0xf << bit);
reg32 |= (pad_func & 0xf) << bit;
}
- writel(reg32, &gpio->port[port].cfg[reg]);
+ write32(&gpio->port[port].cfg[reg], reg32);
}
}
diff --git a/src/cpu/allwinner/a10/raminit.c b/src/cpu/allwinner/a10/raminit.c
index c1df4f427a..28fd408d7e 100644
--- a/src/cpu/allwinner/a10/raminit.c
+++ b/src/cpu/allwinner/a10/raminit.c
@@ -118,7 +118,7 @@ static void mctl_configure_hostport(void)
u32 i;
for (i = 0; i < 32; i++)
- writel(hpcr_value[i], &dram->hpcr[i]);
+ write32(&dram->hpcr[i], hpcr_value[i]);
}
static void mctl_setup_dram_clock(u32 clk)
@@ -333,9 +333,9 @@ static void dramc_set_autorefresh_cycle(u32 clk)
tmp_val = tmp_val * 9 - 200;
reg32 |= tmp_val << 8;
reg32 |= 0x8 << 24;
- writel(reg32, &dram->drr);
+ write32(&dram->drr, reg32);
} else {
- writel(0x0, &dram->drr);
+ write32(&dram->drr, 0x0);
}
}
@@ -360,7 +360,7 @@ unsigned long dramc_init(struct dram_para *para)
a1x_gate_dram_clock_output();
/* select dram controller 1 */
- writel(DRAM_CSEL_MAGIC, &dram->csel);
+ write32(&dram->csel, DRAM_CSEL_MAGIC);
mctl_itm_disable();
mctl_enable_dll0(para->tpr3);
@@ -390,7 +390,7 @@ unsigned long dramc_init(struct dram_para *para)
reg32 |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
reg32 |= DRAM_DCR_CMD_RANK_ALL;
reg32 |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
- writel(reg32, &dram->dcr);
+ write32(&dram->dcr, reg32);
/* dram clock on */
a1x_ungate_dram_clock_output();
@@ -405,21 +405,21 @@ unsigned long dramc_init(struct dram_para *para)
reg32 = ((para->zq) >> 8) & 0xfffff;
reg32 |= ((para->zq) & 0xff) << 20;
reg32 |= (para->zq) & 0xf0000000;
- writel(reg32, &dram->zqcr0);
+ write32(&dram->zqcr0, reg32);
/* set I/O configure register */
reg32 = 0x00cc0000;
reg32 |= (para->odt_en) & 0x3;
reg32 |= ((para->odt_en) & 0x3) << 30;
- writel(reg32, &dram->iocr);
+ write32(&dram->iocr, reg32);
/* set refresh period */
dramc_set_autorefresh_cycle(para->clock);
/* set timing parameters */
- writel(para->tpr0, &dram->tpr0);
- writel(para->tpr1, &dram->tpr1);
- writel(para->tpr2, &dram->tpr2);
+ write32(&dram->tpr0, para->tpr0);
+ write32(&dram->tpr1, para->tpr1);
+ write32(&dram->tpr2, para->tpr2);
if (para->type == DRAM_MEMORY_TYPE_DDR3) {
reg32 = DRAM_MR_BURST_LENGTH(0x0);
@@ -430,11 +430,11 @@ unsigned long dramc_init(struct dram_para *para)
reg32 |= DRAM_MR_CAS_LAT(para->cas);
reg32 |= DRAM_MR_WRITE_RECOVERY(0x5);
}
- writel(reg32, &dram->mr);
+ write32(&dram->mr, reg32);
- writel(para->emr1, &dram->emr);
- writel(para->emr2, &dram->emr2);
- writel(para->emr3, &dram->emr3);
+ write32(&dram->emr, para->emr1);
+ write32(&dram->emr2, para->emr2);
+ write32(&dram->emr3, para->emr3);
/* set DQS window mode */
clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
diff --git a/src/cpu/allwinner/a10/timer.c b/src/cpu/allwinner/a10/timer.c
index 2ff88f528d..5082114d1b 100644
--- a/src/cpu/allwinner/a10/timer.c
+++ b/src/cpu/allwinner/a10/timer.c
@@ -24,13 +24,13 @@ void init_timer(void)
{
u32 reg32;
/* Load the timer rollover value */
- writel(0xffffffff, &tmr0->interval);
+ write32(&tmr0->interval, 0xffffffff);
/* Configure the timer to run from 24MHz oscillator, no prescaler */
reg32 = TIMER_CTRL_PRESC_DIV_EXP(0);
reg32 |= TIMER_CTRL_CLK_SRC_OSC24M;
reg32 |= TIMER_CTRL_RELOAD;
reg32 |= TIMER_CTRL_TMR_EN;
- writel(reg32, &tmr0->ctrl);
+ write32(&tmr0->ctrl, reg32);
}
void udelay(unsigned usec)
@@ -61,6 +61,6 @@ void udelay(unsigned usec)
*/
u8 a1x_get_cpu_chip_revision(void)
{
- writel(0, &timer_module->cpu_cfg);
+ write32(&timer_module->cpu_cfg, 0);
return (read32(&timer_module->cpu_cfg) >> 6) & 0x3;
}
diff --git a/src/cpu/allwinner/a10/twi.c b/src/cpu/allwinner/a10/twi.c
index b5d9880847..f780721e10 100644
--- a/src/cpu/allwinner/a10/twi.c
+++ b/src/cpu/allwinner/a10/twi.c
@@ -42,7 +42,7 @@ static void configure_clock(struct a1x_twi *twi, u32 speed_hz)
/* Pre-divide the clock by 8 */
n = 3;
m = (apb_clk >> n) / speed_hz;
- writel(TWI_CLK_M(m) | TWI_CLK_N(n), &twi->clk);
+ write32(&twi->clk, TWI_CLK_M(m) | TWI_CLK_N(n));
}
void a1x_twi_init(u8 bus, u32 speed_hz)
@@ -53,9 +53,9 @@ void a1x_twi_init(u8 bus, u32 speed_hz)
configure_clock(twi, speed_hz);
/* Enable the I²C bus */
- writel(TWI_CTL_BUS_EN, &twi->ctl);
+ write32(&twi->ctl, TWI_CTL_BUS_EN);
/* Issue soft reset */
- writel(1, &twi->reset);
+ write32(&twi->reset, 1);
while (i-- && read32(&twi->reset))
udelay(1);
@@ -63,12 +63,12 @@ void a1x_twi_init(u8 bus, u32 speed_hz)
static void clear_interrupt_flag(struct a1x_twi *twi)
{
- writel(read32(&twi->ctl) & ~TWI_CTL_INT_FLAG, &twi->ctl);
+ write32(&twi->ctl, read32(&twi->ctl) & ~TWI_CTL_INT_FLAG);
}
static void i2c_send_data(struct a1x_twi *twi, u8 data)
{
- writel(data, &twi->data);
+ write32(&twi->data, data);
clear_interrupt_flag(twi);
}
@@ -90,7 +90,7 @@ static void i2c_send_start(struct a1x_twi *twi)
reg32 = read32(&twi->ctl);
reg32 &= ~TWI_CTL_INT_FLAG;
reg32 |= TWI_CTL_M_START;
- writel(reg32, &twi->ctl);
+ write32(&twi->ctl, reg32);
/* M_START is automatically cleared after condition is transmitted */
i = TWI_TIMEOUT;
@@ -106,7 +106,7 @@ static void i2c_send_stop(struct a1x_twi *twi)
reg32 = read32(&twi->ctl);
reg32 &= ~TWI_CTL_INT_FLAG;
reg32 |= TWI_CTL_M_STOP;
- writel(reg32, &twi->ctl);
+ write32(&twi->ctl, reg32);
}
static int i2c_read(struct a1x_twi *twi, uint8_t chip,
diff --git a/src/cpu/allwinner/a10/uart.c b/src/cpu/allwinner/a10/uart.c
index 6883b4ea38..3c0286785a 100644
--- a/src/cpu/allwinner/a10/uart.c
+++ b/src/cpu/allwinner/a10/uart.c
@@ -22,10 +22,10 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit
div = (u16) uart_baudrate_divisor(baud_rate,
uart_platform_refclk(), 16);
/* Enable access to Divisor Latch register */
- writel(UART8250_LCR_DLAB, &uart->lcr);
+ write32(&uart->lcr, UART8250_LCR_DLAB);
/* Set baudrate */
- writel((div >> 8) & 0xff, &uart->dlh);
- writel(div & 0xff, &uart->dll);
+ write32(&uart->dlh, (div >> 8) & 0xff);
+ write32(&uart->dll, div & 0xff);
/* Set line control */
reg32 = (data_bits - 5) & UART8250_LCR_WLS_MSK;
switch (parity) {
@@ -40,12 +40,12 @@ static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bit
default:
break;
}
- writel(reg32, &uart->lcr);
+ write32(&uart->lcr, reg32);
}
static void a10_uart_enable_fifos(struct a10_uart *uart)
{
- writel(UART8250_FCR_FIFO_EN, &uart->fcr);
+ write32(&uart->fcr, UART8250_FCR_FIFO_EN);
}
static int tx_fifo_full(struct a10_uart *uart)
@@ -83,7 +83,7 @@ static void a10_uart_tx_blocking(struct a10_uart *uart, u8 data)
{
while (tx_fifo_full(uart)) ;
- return writel(data, &uart->thr);
+ return write32(&uart->thr, data);
}
diff --git a/src/cpu/ti/am335x/pinmux.c b/src/cpu/ti/am335x/pinmux.c
index 292865a495..88e5ffcbf3 100644
--- a/src/cpu/ti/am335x/pinmux.c
+++ b/src/cpu/ti/am335x/pinmux.c
@@ -28,163 +28,163 @@ static struct am335x_pinmux_regs *regs =
void am335x_pinmux_uart0(void)
{
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->uart0_rxd);
- writel(MODE(0) | PULLUDEN, &regs->uart0_txd);
+ write32(&regs->uart0_rxd, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->uart0_txd, MODE(0) | PULLUDEN);
}
void am335x_pinmux_uart1(void)
{
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->uart1_rxd);
- writel(MODE(0) | PULLUDEN, &regs->uart1_txd);
+ write32(&regs->uart1_rxd, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->uart1_txd, MODE(0) | PULLUDEN);
}
void am335x_pinmux_uart2(void)
{
// UART2_RXD
- writel(MODE(1) | PULLUP_EN | RXACTIVE, &regs->spi0_sclk);
+ write32(&regs->spi0_sclk, MODE(1) | PULLUP_EN | RXACTIVE);
// UART2_TXD
- writel(MODE(1) | PULLUDEN, &regs->spi0_d0);
+ write32(&regs->spi0_d0, MODE(1) | PULLUDEN);
}
void am335x_pinmux_uart3(void)
{
// UART3_RXD
- writel(MODE(1) | PULLUP_EN | RXACTIVE, &regs->spi0_cs1);
+ write32(&regs->spi0_cs1, MODE(1) | PULLUP_EN | RXACTIVE);
// UART3_TXD
- writel(MODE(1) | PULLUDEN, &regs->ecap0_in_pwm0_out);
+ write32(&regs->ecap0_in_pwm0_out, MODE(1) | PULLUDEN);
}
void am335x_pinmux_uart4(void)
{
// UART4_RXD
- writel(MODE(6) | PULLUP_EN | RXACTIVE, &regs->gpmc_wait0);
+ write32(&regs->gpmc_wait0, MODE(6) | PULLUP_EN | RXACTIVE);
// UART4_TXD
- writel(MODE(6) | PULLUDEN, &regs->gpmc_wpn);
+ write32(&regs->gpmc_wpn, MODE(6) | PULLUDEN);
}
void am335x_pinmux_uart5(void)
{
// UART5_RXD
- writel(MODE(4) | PULLUP_EN | RXACTIVE, &regs->lcd_data9);
+ write32(&regs->lcd_data9, MODE(4) | PULLUP_EN | RXACTIVE);
// UART5_TXD
- writel(MODE(4) | PULLUDEN, &regs->lcd_data8);
+ write32(&regs->lcd_data8, MODE(4) | PULLUDEN);
}
void am335x_pinmux_mmc0(int cd, int sk_evm)
{
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_dat0);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_dat1);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_dat2);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_dat3);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_clk);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mmc0_cmd);
+ write32(&regs->mmc0_dat0, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mmc0_dat1, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mmc0_dat2, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mmc0_dat3, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mmc0_clk, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mmc0_cmd, MODE(0) | RXACTIVE | PULLUP_EN);
if (!sk_evm) {
// MMC0_WP
- writel(MODE(4) | RXACTIVE, &regs->mcasp0_aclkr);
+ write32(&regs->mcasp0_aclkr, MODE(4) | RXACTIVE);
}
if (cd) {
// MMC0_CD
- writel(MODE(5) | RXACTIVE | PULLUP_EN, &regs->spi0_cs1);
+ write32(&regs->spi0_cs1, MODE(5) | RXACTIVE | PULLUP_EN);
}
}
void am335x_pinmux_mmc1(void)
{
// MMC1_DAT0
- writel(MODE(1) | RXACTIVE | PULLUP_EN, &regs->gpmc_ad0);
+ write32(&regs->gpmc_ad0, MODE(1) | RXACTIVE | PULLUP_EN);
// MMC1_DAT1
- writel(MODE(1) | RXACTIVE | PULLUP_EN, &regs->gpmc_ad1);
+ write32(&regs->gpmc_ad1, MODE(1) | RXACTIVE | PULLUP_EN);
// MMC1_DAT2
- writel(MODE(1) | RXACTIVE | PULLUP_EN, &regs->gpmc_ad2);
+ write32(&regs->gpmc_ad2, MODE(1) | RXACTIVE | PULLUP_EN);
// MMC1_DAT3
- writel(MODE(1) | RXACTIVE | PULLUP_EN, &regs->gpmc_ad3);
+ write32(&regs->gpmc_ad3, MODE(1) | RXACTIVE | PULLUP_EN);
// MMC1_CLK
- writel(MODE(2) | RXACTIVE | PULLUP_EN, &regs->gpmc_csn1);
+ write32(&regs->gpmc_csn1, MODE(2) | RXACTIVE | PULLUP_EN);
// MMC1_CMD
- writel(MODE(2) | RXACTIVE | PULLUP_EN, &regs->gpmc_csn2);
+ write32(&regs->gpmc_csn2, MODE(2) | RXACTIVE | PULLUP_EN);
// MMC1_WP
- writel(MODE(7) | RXACTIVE | PULLUP_EN, &regs->gpmc_csn0);
+ write32(&regs->gpmc_csn0, MODE(7) | RXACTIVE | PULLUP_EN);
// MMC1_CD
- writel(MODE(7) | RXACTIVE | PULLUP_EN, &regs->gpmc_advn_ale);
+ write32(&regs->gpmc_advn_ale, MODE(7) | RXACTIVE | PULLUP_EN);
}
void am335x_pinmux_i2c0(void)
{
- writel(MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL, &regs->i2c0_sda);
- writel(MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL, &regs->i2c0_scl);
+ write32(&regs->i2c0_sda, MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL);
+ write32(&regs->i2c0_scl, MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL);
}
void am335x_pinmux_i2c1(void)
{
// I2C_DATA
- writel(MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL, &regs->spi0_d1);
+ write32(&regs->spi0_d1, MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL);
// I2C_SCLK
- writel(MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL, &regs->spi0_cs0);
+ write32(&regs->spi0_cs0, MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL);
}
void am335x_pinmux_spi0(void)
{
- writel(MODE(0) | RXACTIVE | PULLUDEN, &regs->spi0_sclk);
- writel(MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN, &regs->spi0_d0);
- writel(MODE(0) | RXACTIVE | PULLUDEN, &regs->spi0_d1);
- writel(MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN, &regs->spi0_cs0);
+ write32(&regs->spi0_sclk, MODE(0) | RXACTIVE | PULLUDEN);
+ write32(&regs->spi0_d0, MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN);
+ write32(&regs->spi0_d1, MODE(0) | RXACTIVE | PULLUDEN);
+ write32(&regs->spi0_cs0, MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN);
}
void am335x_pinmux_gpio0_7(void)
{
- writel(MODE(7) | PULLUDEN, &regs->ecap0_in_pwm0_out);
+ write32(&regs->ecap0_in_pwm0_out, MODE(7) | PULLUDEN);
}
void am335x_pinmux_rgmii1(void)
{
- writel(MODE(2), &regs->mii1_txen);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxdv);
- writel(MODE(2), &regs->mii1_txd0);
- writel(MODE(2), &regs->mii1_txd1);
- writel(MODE(2), &regs->mii1_txd2);
- writel(MODE(2), &regs->mii1_txd3);
- writel(MODE(2), &regs->mii1_txclk);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxclk);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxd0);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxd1);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxd2);
- writel(MODE(2) | RXACTIVE, &regs->mii1_rxd3);
+ write32(&regs->mii1_txen, MODE(2));
+ write32(&regs->mii1_rxdv, MODE(2) | RXACTIVE);
+ write32(&regs->mii1_txd0, MODE(2));
+ write32(&regs->mii1_txd1, MODE(2));
+ write32(&regs->mii1_txd2, MODE(2));
+ write32(&regs->mii1_txd3, MODE(2));
+ write32(&regs->mii1_txclk, MODE(2));
+ write32(&regs->mii1_rxclk, MODE(2) | RXACTIVE);
+ write32(&regs->mii1_rxd0, MODE(2) | RXACTIVE);
+ write32(&regs->mii1_rxd1, MODE(2) | RXACTIVE);
+ write32(&regs->mii1_rxd2, MODE(2) | RXACTIVE);
+ write32(&regs->mii1_rxd3, MODE(2) | RXACTIVE);
}
void am335x_pinmux_mii1(void)
{
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxerr);
- writel(MODE(0), &regs->mii1_txen);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxdv);
- writel(MODE(0), &regs->mii1_txd0);
- writel(MODE(0), &regs->mii1_txd1);
- writel(MODE(0), &regs->mii1_txd2);
- writel(MODE(0), &regs->mii1_txd3);
- writel(MODE(0) | RXACTIVE, &regs->mii1_txclk);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxclk);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxd0);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxd1);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxd2);
- writel(MODE(0) | RXACTIVE, &regs->mii1_rxd3);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->mdio_data);
- writel(MODE(0) | PULLUP_EN, &regs->mdio_clk);
+ write32(&regs->mii1_rxerr, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_txen, MODE(0));
+ write32(&regs->mii1_rxdv, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_txd0, MODE(0));
+ write32(&regs->mii1_txd1, MODE(0));
+ write32(&regs->mii1_txd2, MODE(0));
+ write32(&regs->mii1_txd3, MODE(0));
+ write32(&regs->mii1_txclk, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_rxclk, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_rxd0, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_rxd1, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_rxd2, MODE(0) | RXACTIVE);
+ write32(&regs->mii1_rxd3, MODE(0) | RXACTIVE);
+ write32(&regs->mdio_data, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->mdio_clk, MODE(0) | PULLUP_EN);
}
void am335x_pinmux_nand(void)
{
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad0);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad1);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad2);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad3);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad4);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad5);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad6);
- writel(MODE(0) | PULLUP_EN | RXACTIVE, &regs->gpmc_ad7);
- writel(MODE(0) | RXACTIVE | PULLUP_EN, &regs->gpmc_wait0);
- writel(MODE(7) | PULLUP_EN | RXACTIVE, &regs->gpmc_wpn);
- writel(MODE(0) | PULLUDEN, &regs->gpmc_csn0);
- writel(MODE(0) | PULLUDEN, &regs->gpmc_advn_ale);
- writel(MODE(0) | PULLUDEN, &regs->gpmc_oen_ren);
- writel(MODE(0) | PULLUDEN, &regs->gpmc_wen);
- writel(MODE(0) | PULLUDEN, &regs->gpmc_be0n_cle);
+ write32(&regs->gpmc_ad0, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad1, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad2, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad3, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad4, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad5, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad6, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_ad7, MODE(0) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_wait0, MODE(0) | RXACTIVE | PULLUP_EN);
+ write32(&regs->gpmc_wpn, MODE(7) | PULLUP_EN | RXACTIVE);
+ write32(&regs->gpmc_csn0, MODE(0) | PULLUDEN);
+ write32(&regs->gpmc_advn_ale, MODE(0) | PULLUDEN);
+ write32(&regs->gpmc_oen_ren, MODE(0) | PULLUDEN);
+ write32(&regs->gpmc_wen, MODE(0) | PULLUDEN);
+ write32(&regs->gpmc_be0n_cle, MODE(0) | PULLUDEN);
}
diff --git a/src/cpu/ti/am335x/uart.c b/src/cpu/ti/am335x/uart.c
index ef8e08cfb8..b2b7196649 100644
--- a/src/cpu/ti/am335x/uart.c
+++ b/src/cpu/ti/am335x/uart.c
@@ -42,88 +42,88 @@ static void am335x_uart_init(struct am335x_uart *uart, uint16_t div)
uint16_t lcr_orig, efr_orig, mcr_orig;
/* reset the UART */
- writew(uart->sysc | SYSC_SOFTRESET, &uart->sysc);
+ write16(&uart->sysc, uart->sysc | SYSC_SOFTRESET);
while (!(read16(&uart->syss) & SYSS_RESETDONE))
;
/* 1. switch to register config mode B */
lcr_orig = read16(&uart->lcr);
- writew(0xbf, &uart->lcr);
+ write16(&uart->lcr, 0xbf);
/*
* 2. Set EFR ENHANCED_EN bit. To access this bit, registers must
* be in TCR_TLR submode, meaning EFR[4] = 1 and MCR[6] = 1.
*/
efr_orig = read16(&uart->efr);
- writew(efr_orig | EFR_ENHANCED_EN, &uart->efr);
+ write16(&uart->efr, efr_orig | EFR_ENHANCED_EN);
/* 3. Switch to register config mode A */
- writew(0x80, &uart->lcr);
+ write16(&uart->lcr, 0x80);
/* 4. Enable register submode TCR_TLR to access the UARTi.UART_TLR */
mcr_orig = read16(&uart->mcr);
- writew(mcr_orig | MCR_TCR_TLR, &uart->mcr);
+ write16(&uart->mcr, mcr_orig | MCR_TCR_TLR);
/* 5. Enable the FIFO. For now we'll ignore FIFO triggers and DMA */
- writew(FCR_FIFO_EN, &uart->fcr);
+ write16(&uart->fcr, FCR_FIFO_EN);
/* 6. Switch to configuration mode B */
- writew(0xbf, &uart->lcr);
+ write16(&uart->lcr, 0xbf);
/* Skip steps 7 and 8 (setting up FIFO triggers for DMA) */
/* 9. Restore original EFR value */
- writew(efr_orig, &uart->efr);
+ write16(&uart->efr, efr_orig);
/* 10. Switch to config mode A */
- writew(0x80, &uart->lcr);
+ write16(&uart->lcr, 0x80);
/* 11. Restore original MCR value */
- writew(mcr_orig, &uart->mcr);
+ write16(&uart->mcr, mcr_orig);
/* 12. Restore original LCR value */
- writew(lcr_orig, &uart->lcr);
+ write16(&uart->lcr, lcr_orig);
/* Protocol, baud rate and interrupt settings */
/* 1. Disable UART access to DLL and DLH registers */
- writew(read16(&uart->mdr1) | 0x7, &uart->mdr1);
+ write16(&uart->mdr1, read16(&uart->mdr1) | 0x7);
/* 2. Switch to config mode B */
- writew(0xbf, &uart->lcr);
+ write16(&uart->lcr, 0xbf);
/* 3. Enable access to IER[7:4] */
- writew(efr_orig | EFR_ENHANCED_EN, &uart->efr);
+ write16(&uart->efr, efr_orig | EFR_ENHANCED_EN);
/* 4. Switch to operational mode */
- writew(0x0, &uart->lcr);
+ write16(&uart->lcr, 0x0);
/* 5. Clear IER */
- writew(0x0, &uart->ier);
+ write16(&uart->ier, 0x0);
/* 6. Switch to config mode B */
- writew(0xbf, &uart->lcr);
+ write16(&uart->lcr, 0xbf);
/* 7. Set dll and dlh to the desired values (table 19-25) */
- writew((div >> 8), &uart->dlh);
- writew((div & 0xff), &uart->dll);
+ write16(&uart->dlh, (div >> 8));
+ write16(&uart->dll, (div & 0xff));
/* 8. Switch to operational mode to access ier */
- writew(0x0, &uart->lcr);
+ write16(&uart->lcr, 0x0);
/* 9. Clear ier to disable all interrupts */
- writew(0x0, &uart->ier);
+ write16(&uart->ier, 0x0);
/* 10. Switch to config mode B */
- writew(0xbf, &uart->lcr);
+ write16(&uart->lcr, 0xbf);
/* 11. Restore efr */
- writew(efr_orig, &uart->efr);
+ write16(&uart->efr, efr_orig);
/* 12. Set protocol formatting 8n1 (8 bit data, no parity, 1 stop bit) */
- writew(0x3, &uart->lcr);
+ write16(&uart->lcr, 0x3);
/* 13. Load the new UART mode */
- writew(0x0, &uart->mdr1);
+ write16(&uart->mdr1, 0x0);
}
/*
@@ -145,7 +145,7 @@ static void am335x_uart_tx_byte(struct am335x_uart *uart, unsigned char data)
{
while (!(read16(&uart->lsr) & LSR_TXFIFOE));
- return writeb(data, &uart->thr);
+ return write8(&uart->thr, data);
}
unsigned int uart_platform_refclk(void)