diff options
Diffstat (limited to 'src/cpu')
-rw-r--r-- | src/cpu/intel/car/cache_as_ram.inc (renamed from src/cpu/x86/car/cache_as_ram.inc) | 157 | ||||
-rw-r--r-- | src/cpu/intel/model_6bx/cache_as_ram_disable.c | 89 | ||||
-rw-r--r-- | src/cpu/intel/socket_mFCBGA479/Makefile.inc | 2 | ||||
-rw-r--r-- | src/cpu/x86/car/cache_as_ram_post.c | 86 |
4 files changed, 121 insertions, 213 deletions
diff --git a/src/cpu/x86/car/cache_as_ram.inc b/src/cpu/intel/car/cache_as_ram.inc index 1b160ea20c..2f2a9ca81f 100644 --- a/src/cpu/x86/car/cache_as_ram.inc +++ b/src/cpu/intel/car/cache_as_ram.inc @@ -126,6 +126,19 @@ clear_fixed_var_mtrr: wrmsr jmp clear_fixed_var_mtrr + +fixed_mtrr_msr: + .long 0x250, 0x258, 0x259 + .long 0x268, 0x269, 0x26A + .long 0x26B, 0x26C, 0x26D + .long 0x26E, 0x26F +var_mtrr_msr: + .long 0x200, 0x201, 0x202, 0x203 + .long 0x204, 0x205, 0x206, 0x207 + .long 0x208, 0x209, 0x20A, 0x20B + .long 0x20C, 0x20D, 0x20E, 0x20F + .long 0x000 /* NULL, end of table */ + clear_fixed_var_mtrr_out: /* 0x06 is the WB IO type for a given 4k segment. @@ -289,48 +302,118 @@ lout: /* We need to set ebp ? No need */ movl %esp, %ebp pushl %eax /* bist */ - call stage1_main - /* We will not go back */ + call main + + /* + FIXME : backup stack in CACHE_AS_RAM into mmx and sse and after we get STACK up, we restore that. + It is only needed if we want to go back + */ + + /* We don't need cache as ram for now on */ + /* disable cache */ + movl %cr0, %eax + orl $(0x1<<30),%eax + movl %eax, %cr0 + + /* clear sth */ + movl $0x269, %ecx /* fix4k_c8000*/ + xorl %edx, %edx + xorl %eax, %eax + wrmsr -fixed_mtrr_msr: - .long 0x250, 0x258, 0x259 - .long 0x268, 0x269, 0x26A - .long 0x26B, 0x26C, 0x26D - .long 0x26E, 0x26F -var_mtrr_msr: - .long 0x200, 0x201, 0x202, 0x203 - .long 0x204, 0x205, 0x206, 0x207 - .long 0x208, 0x209, 0x20A, 0x20B - .long 0x20C, 0x20D, 0x20E, 0x20F - .long 0x000 /* NULL, end of table */ +#if CONFIG_DCACHE_RAM_SIZE > 0x8000 + movl $0x268, %ecx /* fix4k_c0000*/ + wrmsr +#endif - .align 0x1000 - .code16 -.global LogicalAP_SIPI -LogicalAP_SIPI: - // cr0 register is shared among the logical processors; - // so clear CD & NW bits so that the BSP's cr0 register - // controls the cache behavior - // Note: The cache behavior is determined by "OR" result - // of the cr0 registers of the logical processors + /* Set the default memory type and disable fixed and enable variable MTRRs */ + movl $0x2ff, %ecx +// movl $MTRRdefType_MSR, %ecx + xorl %edx, %edx + /* Enable Variable and Disable Fixed MTRRs */ + movl $0x00000800, %eax + wrmsr - movl %cr0, %eax - andl $0x9FFFFFFF, %eax - movl %eax, %cr0 +#if defined(CLEAR_FIRST_1M_RAM) + /* enable caching for first 1M using variable mtrr */ + movl $0x200, %ecx + xorl %edx, %edx + movl $(0 | 1), %eax +// movl $(0 | MTRR_TYPE_WRCOMB), %eax + wrmsr - finit + movl $0x201, %ecx + movl $0x0000000f, %edx /* AMD 40 bit 0xff*/ + movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax + wrmsr +#endif - // Set the semaphore to indicate the Logical AP is done - // with CAR specific initialization - movl $0x250, %ecx - movl $0x06, %eax - xorl %edx, %edx + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff,%eax + movl %eax, %cr0 + +#if defined(CLEAR_FIRST_1M_RAM) + /* clear the first 1M */ + movl $0x0, %edi + cld + movl $(0x100000>>2), %ecx + xorl %eax, %eax + rep stosl + + /* disable cache */ + movl %cr0, %eax + orl $(0x1<<30),%eax + movl %eax, %cr0 + + /* enable caching for first 1M using variable mtrr */ + movl $0x200, %ecx + xorl %edx, %edx + movl $(0 | 6), %eax +// movl $(0 | MTRR_TYPE_WRBACK), %eax wrmsr - // Halt this AP - cli -Halt_LogicalAP: + movl $0x201, %ecx + movl $0x0000000f, %edx /* AMD 40 bit 0xff*/ + movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax + wrmsr + + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff,%eax + movl %eax, %cr0 + invd + + /* FIXME: I hope we don't need to change esp and ebp value here, so we + * can restore value from mmx sse back But the problem is the range is + * some io related, So don't go back + */ +#endif + + /* clear boot_complete flag */ + xorl %ebp, %ebp +__main: + post_code(0x11) + cld /* clear direction flag */ + + movl %ebp, %esi + + /* For now: use CONFIG_RAMBASE + 1MB - 64K (counting downwards) as stack. This + * makes sure that we stay completely within the 1M-64K of memory that we + * preserve for suspend/resume. + */ + +#ifndef HIGH_MEMORY_SAVE +#warning Need a central place for HIGH_MEMORY_SAVE +#define HIGH_MEMORY_SAVE ( (1024 - 64) * 1024 ) +#endif + movl $(CONFIG_RAMBASE + HIGH_MEMORY_SAVE), %esp + movl %esp, %ebp + pushl %esi + call copy_and_run + +.Lhlt: + post_code(0xee) hlt - jmp Halt_LogicalAP - .code32 -.CacheAsRam_out: + jmp .Lhlt + diff --git a/src/cpu/intel/model_6bx/cache_as_ram_disable.c b/src/cpu/intel/model_6bx/cache_as_ram_disable.c deleted file mode 100644 index d3f34982b6..0000000000 --- a/src/cpu/intel/model_6bx/cache_as_ram_disable.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/stages.h> - -/* called from assembler code */ -void stage1_main(unsigned long bist); - -/* from romstage.c */ -void real_main(unsigned long bist); - -void stage1_main(unsigned long bist) -{ - unsigned int cpu_reset = 0; - - real_main(bist); - - /* No servicable parts below this line .. */ -#ifdef CAR_DEBUG - /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ - unsigned v_esp; - __asm__ volatile ( - "movl %%esp, %0\n" - : "=a" (v_esp) - ); - printk(BIOS_SPEW, "v_esp=%08x\n", v_esp); -#endif - - printk(BIOS_SPEW, "cpu_reset = %08x\n", cpu_reset); - printk(BIOS_SPEW, "No cache as ram now - "); - - /* store cpu_reset to ebx */ - __asm__ volatile ( - "movl %0, %%ebx\n\t" - ::"a" (cpu_reset) - ); - -#undef CLEAR_FIRST_1M_RAM -#include "cpu/x86/car/cache_as_ram_post.c" - - /* For now: use rambase + 1MB - 64K (counting downwards) as stack. This - * makes sure that we stay completely within the 1M of memory we - * preserve with the memcpy above. - */ - -#ifndef HIGH_MEMORY_SAVE -#define HIGH_MEMORY_SAVE ( (1024 - 64) * 1024 ) -#endif - - __asm__ volatile ( - "movl %0, %%ebp\n" - "movl %0, %%esp\n" - :: "a" (CONFIG_RAMBASE + HIGH_MEMORY_SAVE) - ); - - { - unsigned new_cpu_reset; - - /* get back cpu_reset from ebx */ - __asm__ volatile ( - "movl %%ebx, %0\n" - :"=a" (new_cpu_reset) - ); - - /* Copy and execute coreboot_ram */ - copy_and_run(new_cpu_reset); - } - - /* We will not return */ - printk(BIOS_DEBUG, "sorry. parachute did not open.\n"); -} diff --git a/src/cpu/intel/socket_mFCBGA479/Makefile.inc b/src/cpu/intel/socket_mFCBGA479/Makefile.inc index af503c8c4a..9f7ca6637c 100644 --- a/src/cpu/intel/socket_mFCBGA479/Makefile.inc +++ b/src/cpu/intel/socket_mFCBGA479/Makefile.inc @@ -7,4 +7,4 @@ subdirs-y += ../../x86/cache subdirs-y += ../../x86/smm subdirs-y += ../microcode -cpu_incs += $(src)/cpu/x86/car/cache_as_ram.inc +cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc diff --git a/src/cpu/x86/car/cache_as_ram_post.c b/src/cpu/x86/car/cache_as_ram_post.c deleted file mode 100644 index f78fb03675..0000000000 --- a/src/cpu/x86/car/cache_as_ram_post.c +++ /dev/null @@ -1,86 +0,0 @@ - - __asm__ volatile ( - /* - FIXME : backup stack in CACHE_AS_RAM into mmx and sse and after we get STACK up, we restore that. - It is only needed if we want to go back - */ - - /* We don't need cache as ram for now on */ - /* disable cache */ - "movl %cr0, %eax\n\t" - "orl $(0x1<<30),%eax\n\t" - "movl %eax, %cr0\n\t" - - /* clear sth */ - "movl $0x269, %ecx\n\t" /* fix4k_c8000*/ - "xorl %edx, %edx\n\t" - "xorl %eax, %eax\n\t" - "wrmsr\n\t" -#if CONFIG_DCACHE_RAM_SIZE > 0x8000 - "movl $0x268, %ecx\n\t" /* fix4k_c0000*/ - "wrmsr\n\t" -#endif - - /* Set the default memory type and disable fixed and enable variable MTRRs */ - "movl $0x2ff, %ecx\n\t" -// "movl $MTRRdefType_MSR, %ecx\n\t" - "xorl %edx, %edx\n\t" - /* Enable Variable and Disable Fixed MTRRs */ - "movl $0x00000800, %eax\n\t" - "wrmsr\n\t" - -#if defined(CLEAR_FIRST_1M_RAM) - /* enable caching for first 1M using variable mtrr */ - "movl $0x200, %ecx\n\t" - "xorl %edx, %edx\n\t" - "movl $(0 | 1), %eax\n\t" -// "movl $(0 | MTRR_TYPE_WRCOMB), %eax\n\t" - "wrmsr\n\t" - - "movl $0x201, %ecx\n\t" - "movl $0x0000000f, %edx\n\t" /* AMD 40 bit 0xff*/ - "movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax\n\t" - "wrmsr\n\t" -#endif - - /* enable cache */ - "movl %cr0, %eax\n\t" - "andl $0x9fffffff,%eax\n\t" - "movl %eax, %cr0\n\t" -#if defined(CLEAR_FIRST_1M_RAM) - /* clear the first 1M */ - "movl $0x0, %edi\n\t" - "cld\n\t" - "movl $(0x100000>>2), %ecx\n\t" - "xorl %eax, %eax\n\t" - "rep stosl\n\t" - - /* disable cache */ - "movl %cr0, %eax\n\t" - "orl $(0x1<<30),%eax\n\t" - "movl %eax, %cr0\n\t" - - /* enable caching for first 1M using variable mtrr */ - "movl $0x200, %ecx\n\t" - "xorl %edx, %edx\n\t" - "movl $(0 | 6), %eax\n\t" -// "movl $(0 | MTRR_TYPE_WRBACK), %eax\n\t" - "wrmsr\n\t" - - "movl $0x201, %ecx\n\t" - "movl $0x0000000f, %edx\n\t" /* AMD 40 bit 0xff*/ - "movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax\n\t" - "wrmsr\n\t" - - /* enable cache */ - "movl %cr0, %eax\n\t" - "andl $0x9fffffff,%eax\n\t" - "movl %eax, %cr0\n\t" - "invd\n\t" - - /* - FIXME: I hope we don't need to change esp and ebp value here, so we can restore value from mmx sse back - But the problem is the range is some io related, So don't go back - */ -#endif - ); |