diff options
Diffstat (limited to 'src/cpu')
| -rw-r--r-- | src/cpu/ppc/ppc7xx/Config.lb | 19 | ||||
| -rw-r--r-- | src/cpu/ppc/ppc7xx/ppc7xx.inc | 179 |
2 files changed, 198 insertions, 0 deletions
diff --git a/src/cpu/ppc/ppc7xx/Config.lb b/src/cpu/ppc/ppc7xx/Config.lb new file mode 100644 index 0000000000..2f77272957 --- /dev/null +++ b/src/cpu/ppc/ppc7xx/Config.lb @@ -0,0 +1,19 @@ +## +## CPU initialization +## +uses _RAMBASE +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE + +## +## PPC7XX always uses cache ram for initial setup +## +default USE_DCACHE_RAM=1 +## Set dcache ram above linuxbios image +default DCACHE_RAM_BASE=_RAMBASE+0x100000 +## Dcache size is 16Kb +default DCACHE_RAM_SIZE=16384 + +initinclude "FAMILY_INIT" cpu/ppc/ppc7xx/ppc7xx.inc + diff --git a/src/cpu/ppc/ppc7xx/ppc7xx.inc b/src/cpu/ppc/ppc7xx/ppc7xx.inc new file mode 100644 index 0000000000..3391b28a44 --- /dev/null +++ b/src/cpu/ppc/ppc7xx/ppc7xx.inc @@ -0,0 +1,179 @@ +/* Copyright 2000 AG Electronics Ltd. */ +/* This code is distributed without warranty under the GPL v2 (see COPYING) */ + +/* + * The aim of this code is to bring the machine from power-on to the point + * where we can jump to the the main LinuxBIOS entry point hardwaremain() + * which is written in C. + * + * At power-on, we have no RAM, a memory-mapped I/O space, and we are executing + * out of ROM, generally at 0xfff00100. + * + * Before we jump to harwaremain() we want to do the following: + * + * - enable L1 I/D caches, otherwise performance will be slow + * - set up DBATs for the following regions: + * - RAM (generally 0x00000000 -> 0x7fffffff) + * - ROM (_ROMBASE -> _ROMBASE + ROM_SIZE) + * - I/O (generally 0xfc000000 -> 0xfdffffff) + * - the main purpose for setting up the DBATs is so the I/O region + * can be marked cache inhibited/write through + * - set up IBATs for RAM and ROM + * + */ + +#define BSP_IOREGION1 0x80000000 +#define BSP_IOMASK1 BAT_BL_256M | BAT_VALID_SUPERVISOR | BAT_VALID_USER +#define BSP_IOREGION2 0xFD000000 +#define BSP_IOMASK2 BAT_BL_64M | BAT_VALID_SUPERVISOR | BAT_VALID_USER + + isync + + /* + * Disable dcache and MMU, so we're in a known state + */ + li r0, 0 + sync + mtspr HID0, r0 + sync + mtmsr r0 + isync + + /* + * Invalidate D & I BATS + */ + mtibatu 0, r0 + mtibatu 1, r0 + mtibatu 2, r0 + mtibatu 3, r0 + isync + mtdbatu 0, r0 + mtdbatu 1, r0 + mtdbatu 2, r0 + mtdbatu 3, r0 + isync + + /* + * Clear segment registers (LinuxBIOS doesn't use these) + */ + mtsr 0, r0 + isync + mtsr 1, r0 + isync + mtsr 2, r0 + isync + mtsr 3, r0 + isync + mtsr 4, r0 + isync + mtsr 5, r0 + isync + mtsr 6, r0 + isync + mtsr 7, r0 + isync + mtsr 8, r0 + isync + mtsr 9, r0 + isync + mtsr 10, r0 + isync + mtsr 11, r0 + isync + mtsr 12, r0 + isync + mtsr 13, r0 + isync + mtsr 14, r0 + isync + mtsr 15, r0 + isync + + /* + * Set up DBATs + * + * DBAT0 covers RAM (0 -> 0x0FFFFFFF) (256Mb) + * DBAT1 covers PCI memory and ROM (0xFD000000 -> 0xFFFFFFFF) (64Mb) + * DBAT2 covers PCI memory (0x80000000 -> 0x8FFFFFFF) (256Mb) + * DBAT3 is not used + */ + lis r2, 0@h + ori r3, r2, BAT_BL_256M | BAT_VALID_SUPERVISOR | BAT_VALID_USER + ori r2, r2, BAT_READ_WRITE | BAT_GUARDED + mtdbatu 0, r3 + mtdbatl 0, r2 + isync + + lis r2, BSP_IOREGION2@h + ori r3, r2, BAT_BL_64M | BAT_VALID_SUPERVISOR | BAT_VALID_USER + ori r2, r2, BAT_CACHE_INHIBITED | BAT_GUARDED | BAT_READ_WRITE + mtdbatu 1, r3 + mtdbatl 1, r2 + isync + + lis r2, BSP_IOREGION1@h + ori r3, r2, BAT_BL_256M | BAT_VALID_SUPERVISOR | BAT_VALID_USER + ori r2, r2, BAT_CACHE_INHIBITED | BAT_GUARDED | BAT_READ_WRITE + mtdbatu 2, r3 + mtdbatl 2, r2 + isync + + /* + * IBATS + * + * IBAT0 covers RAM (0 -> 256Mb) + * IBAT1 covers ROM (_ROMBASE -> _ROMBASE+ROM_SIZE) + */ + lis r2, 0@h + ori r3, r2, BAT_BL_256M | BAT_VALID_SUPERVISOR | BAT_VALID_USER + ori r2, r2, BAT_READ_WRITE + mtibatu 0, r3 + mtibatl 0, r2 + isync + + lis r2, _ROMBASE@h +#if ROM_SIZE > 1048576 + ori r3, r2, BAT_BL_16M | BAT_VALID_SUPERVISOR | BAT_VALID_USER +#else + ori r3, r2, BAT_BL_1M | BAT_VALID_SUPERVISOR | BAT_VALID_USER +#endif + ori r2, r2, BAT_READ_ONLY + mtibatu 1, r3 + mtibatl 1, r2 + isync + + /* + * Enable MMU + */ + mfmsr r2 + ori r2, r2, MSR_DR | MSR_IR + mtmsr r2 + isync + sync + + /* + * Enable and invalidate the L1 icache + */ + mfspr r2, HID0 + ori r2, r2, HID0_ICE | HID0_ICFI + isync + mtspr HID0, r2 + /* + * Enable and invalidate the L1 dcache + */ + mfspr r2, HID0 + ori r2, r2, HID0_DCE | HID0_DCFI + sync + mtspr HID0, r2 + + /* + * Initialize data cache blocks + * (assumes cache block size of 32 bytes) + */ + lis r1, DCACHE_RAM_BASE@h + ori r1, r1, DCACHE_RAM_BASE@l + li r3, (DCACHE_RAM_SIZE / 32) + mtctr r3 +0: dcbz r0, r1 + addi r1, r1, 32 + bdnz 0b |