diff options
Diffstat (limited to 'src/device/Kconfig')
| -rw-r--r-- | src/device/Kconfig | 379 |
1 files changed, 190 insertions, 189 deletions
diff --git a/src/device/Kconfig b/src/device/Kconfig index c727fba854..5d9aa899bb 100644 --- a/src/device/Kconfig +++ b/src/device/Kconfig @@ -217,185 +217,6 @@ config MULTIPLE_VGA_ADAPTERS bool default n -config SMBUS_HAS_AUX_CHANNELS - bool - default n - -config PCI - bool - default n - -if PCI - -config NO_MMCONF_SUPPORT - bool - default n - -config MMCONF_SUPPORT - bool - default !NO_MMCONF_SUPPORT - -config HYPERTRANSPORT_PLUGIN_SUPPORT - bool - default n - -config PCIX_PLUGIN_SUPPORT - bool - default y - -config CARDBUS_PLUGIN_SUPPORT - bool - default y - -config AZALIA_PLUGIN_SUPPORT - bool - default n - -config PCIEXP_PLUGIN_SUPPORT - bool - default y - -endif # PCI - -if PCIEXP_PLUGIN_SUPPORT - -config PCIEXP_COMMON_CLOCK - prompt "Enable PCIe Common Clock" - bool - default n - help - Detect and enable Common Clock on PCIe links. - -config PCIEXP_ASPM - prompt "Enable PCIe ASPM" - bool - default n - help - Detect and enable ASPM (Active State Power Management) on PCIe links. - -config PCIEXP_CLK_PM - prompt "Enable PCIe Clock Power Management" - bool - default n - help - Detect and enable Clock Power Management on PCIe. - -config PCIEXP_L1_SUB_STATE - prompt "Enable PCIe ASPM L1 SubState" - bool - depends on (MMCONF_SUPPORT || PCI_IO_CFG_EXT) - default n - help - Detect and enable ASPM on PCIe links. - -endif # PCIEXP_PLUGIN_SUPPORT - -config EARLY_PCI_BRIDGE - bool "Early PCI bridge" - depends on PCI - default n - help - While coreboot is executing code from ROM, the coreboot resource - allocator has not been running yet. Hence PCI devices living behind - a bridge are not yet visible to the system. - - This option enables static configuration for a single pre-defined - PCI bridge function on bus 0. - -if EARLY_PCI_BRIDGE - -config EARLY_PCI_BRIDGE_DEVICE - hex "bridge device" - default 0x0 - -config EARLY_PCI_BRIDGE_FUNCTION - hex "bridge function" - default 0x0 - -config EARLY_PCI_MMIO_BASE - hex "MMIO window base" - default 0x0 - -endif # EARLY_PCI_BRIDGE - -config SUBSYSTEM_VENDOR_ID - hex "Override PCI Subsystem Vendor ID" - depends on PCI - default 0x0000 - help - This config option will override the devicetree settings for - PCI Subsystem Vendor ID. - -config SUBSYSTEM_DEVICE_ID - hex "Override PCI Subsystem Device ID" - depends on PCI - default 0x0000 - help - This config option will override the devicetree settings for - PCI Subsystem Device ID. - -config VGA_BIOS - bool "Add a VGA BIOS image" - depends on ARCH_X86 - help - Select this option if you have a VGA BIOS image that you would - like to add to your ROM. - - You will be able to specify the location and file name of the - image later. - -config VGA_BIOS_FILE - string "VGA BIOS path and filename" - depends on VGA_BIOS - default "vgabios.bin" - help - The path and filename of the file to use as VGA BIOS. - -config VGA_BIOS_ID - string "VGA device PCI IDs" - depends on VGA_BIOS - default "1106,3230" - help - The comma-separated PCI vendor and device ID that would associate - your VGA BIOS to your video card. - - Example: 1106,3230 - - In the above example 1106 is the PCI vendor ID (in hex, but without - the "0x" prefix) and 3230 specifies the PCI device ID of the - video card (also in hex, without "0x" prefix). - - Under GNU/Linux you can run `lspci -nn` to list the IDs of your PCI devices. - -config INTEL_MBI - bool "Add an MBI image" - depends on NORTHBRIDGE_INTEL_I82830 - help - Select this option if you have an Intel MBI image that you would - like to add to your ROM. - - You will be able to specify the location and file name of the - image later. - -config MBI_FILE - string "Intel MBI path and filename" - depends on INTEL_MBI - default "mbi.bin" - help - The path and filename of the file to use as VGA BIOS. - -config SOFTWARE_I2C - bool "Enable I2C controller emulation in software" - default n - help - This config option will enable code to override the i2c_transfer - routine with a (simple) software emulation of the protocol. This may - be useful for debugging or on platforms where a driver for the real - I2C controller is not (yet) available. The platform code needs to - provide bindings to manually toggle I2C lines. - -endmenu - menu "Display" depends on HAVE_VGA_TEXT_FRAMEBUFFER || HAVE_LINEAR_FRAMEBUFFER @@ -407,10 +228,11 @@ config FRAMEBUFFER_SET_VESA_MODE help Set VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console) +if FRAMEBUFFER_SET_VESA_MODE + choice prompt "framebuffer graphics resolution" default FRAMEBUFFER_VESA_MODE_117 - depends on FRAMEBUFFER_SET_VESA_MODE help This option sets the resolution used for the coreboot framebuffer (and bootsplash screen). @@ -501,7 +323,6 @@ config FRAMEBUFFER_VESA_MODE_11B config FRAMEBUFFER_VESA_MODE_USER bool "Manually select VESA mode" - depends on !MAINBOARD_DO_NATIVE_VGA_INIT endchoice @@ -539,6 +360,19 @@ config FRAMEBUFFER_VESA_MODE default 0x11B if FRAMEBUFFER_VESA_MODE_11B default 0x117 if FRAMEBUFFER_VESA_MODE_USER +config BOOTSPLASH + prompt "Show graphical bootsplash" + bool + help + This option shows a graphical bootsplash screen. The graphics are + loaded from the CBFS file bootsplash.jpg. + + You can either specify the location and file name of the + image in the 'General' section or add it manually to CBFS, using, + for example, cbfstool. + +endif # FRAMEBUFFER_SET_VESA_MODE + choice prompt "Framebuffer mode" default VGA_TEXT_FRAMEBUFFER @@ -578,16 +412,183 @@ config LINEAR_FRAMEBUFFER def_bool y depends on VBE_LINEAR_FRAMEBUFFER || GENERIC_LINEAR_FRAMEBUFFER -config BOOTSPLASH - prompt "Show graphical bootsplash" +endmenu # "Display" + +config SMBUS_HAS_AUX_CHANNELS + bool + default n + +config PCI + bool + default n + +if PCI + +config NO_MMCONF_SUPPORT + bool + default n + +config MMCONF_SUPPORT bool - depends on FRAMEBUFFER_SET_VESA_MODE + default !NO_MMCONF_SUPPORT + +config HYPERTRANSPORT_PLUGIN_SUPPORT + bool + default n + +config PCIX_PLUGIN_SUPPORT + bool + default y + +config CARDBUS_PLUGIN_SUPPORT + bool + default y + +config AZALIA_PLUGIN_SUPPORT + bool + default n + +config PCIEXP_PLUGIN_SUPPORT + bool + default y + +endif # PCI + +if PCIEXP_PLUGIN_SUPPORT + +config PCIEXP_COMMON_CLOCK + prompt "Enable PCIe Common Clock" + bool + default n help - This option shows a graphical bootsplash screen. The graphics are - loaded from the CBFS file bootsplash.jpg. + Detect and enable Common Clock on PCIe links. - You can either specify the location and file name of the - image in the 'General' section or add it manually to CBFS, using, - for example, cbfstool. +config PCIEXP_ASPM + prompt "Enable PCIe ASPM" + bool + default n + help + Detect and enable ASPM (Active State Power Management) on PCIe links. + +config PCIEXP_CLK_PM + prompt "Enable PCIe Clock Power Management" + bool + default n + help + Detect and enable Clock Power Management on PCIe. + +config PCIEXP_L1_SUB_STATE + prompt "Enable PCIe ASPM L1 SubState" + bool + depends on (MMCONF_SUPPORT || PCI_IO_CFG_EXT) + default n + help + Detect and enable ASPM on PCIe links. + +endif # PCIEXP_PLUGIN_SUPPORT + +config EARLY_PCI_BRIDGE + bool "Early PCI bridge" + depends on PCI + default n + help + While coreboot is executing code from ROM, the coreboot resource + allocator has not been running yet. Hence PCI devices living behind + a bridge are not yet visible to the system. + + This option enables static configuration for a single pre-defined + PCI bridge function on bus 0. + +if EARLY_PCI_BRIDGE + +config EARLY_PCI_BRIDGE_DEVICE + hex "bridge device" + default 0x0 + +config EARLY_PCI_BRIDGE_FUNCTION + hex "bridge function" + default 0x0 + +config EARLY_PCI_MMIO_BASE + hex "MMIO window base" + default 0x0 + +endif # EARLY_PCI_BRIDGE + +config SUBSYSTEM_VENDOR_ID + hex "Override PCI Subsystem Vendor ID" + depends on PCI + default 0x0000 + help + This config option will override the devicetree settings for + PCI Subsystem Vendor ID. + +config SUBSYSTEM_DEVICE_ID + hex "Override PCI Subsystem Device ID" + depends on PCI + default 0x0000 + help + This config option will override the devicetree settings for + PCI Subsystem Device ID. + +config VGA_BIOS + bool "Add a VGA BIOS image" + depends on ARCH_X86 + help + Select this option if you have a VGA BIOS image that you would + like to add to your ROM. + + You will be able to specify the location and file name of the + image later. + +config VGA_BIOS_FILE + string "VGA BIOS path and filename" + depends on VGA_BIOS + default "vgabios.bin" + help + The path and filename of the file to use as VGA BIOS. + +config VGA_BIOS_ID + string "VGA device PCI IDs" + depends on VGA_BIOS + default "1106,3230" + help + The comma-separated PCI vendor and device ID that would associate + your VGA BIOS to your video card. + + Example: 1106,3230 + + In the above example 1106 is the PCI vendor ID (in hex, but without + the "0x" prefix) and 3230 specifies the PCI device ID of the + video card (also in hex, without "0x" prefix). + + Under GNU/Linux you can run `lspci -nn` to list the IDs of your PCI devices. + +config INTEL_MBI + bool "Add an MBI image" + depends on NORTHBRIDGE_INTEL_I82830 + help + Select this option if you have an Intel MBI image that you would + like to add to your ROM. + + You will be able to specify the location and file name of the + image later. + +config MBI_FILE + string "Intel MBI path and filename" + depends on INTEL_MBI + default "mbi.bin" + help + The path and filename of the file to use as VGA BIOS. + +config SOFTWARE_I2C + bool "Enable I2C controller emulation in software" + default n + help + This config option will enable code to override the i2c_transfer + routine with a (simple) software emulation of the protocol. This may + be useful for debugging or on platforms where a driver for the real + I2C controller is not (yet) available. The platform code needs to + provide bindings to manually toggle I2C lines. endmenu |