summaryrefslogtreecommitdiff
path: root/src/device
diff options
context:
space:
mode:
Diffstat (limited to 'src/device')
-rw-r--r--src/device/Kconfig10
-rw-r--r--src/device/Makefile.inc4
-rw-r--r--src/device/software_i2c.c345
3 files changed, 359 insertions, 0 deletions
diff --git a/src/device/Kconfig b/src/device/Kconfig
index bd2f34b618..67d01e077a 100644
--- a/src/device/Kconfig
+++ b/src/device/Kconfig
@@ -376,6 +376,16 @@ config PXE_ROM_ID
Under GNU/Linux you can run `lspci -nn` to list the IDs of your PCI devices.
+config SOFTWARE_I2C
+ bool "Enable I2C controller emulation in software"
+ default n
+ help
+ This config option will enable code to override the i2c_transfer
+ routine with a (simple) software emulation of the protocol. This may
+ be useful for debugging or on platforms where a driver for the real
+ I2C controller is not (yet) available. The platform code needs to
+ provide bindings to manually toggle I2C lines.
+
endmenu
menu "Display"
diff --git a/src/device/Makefile.inc b/src/device/Makefile.inc
index a7f336489d..7fdd9b587d 100644
--- a/src/device/Makefile.inc
+++ b/src/device/Makefile.inc
@@ -24,3 +24,7 @@ romstage-$(CONFIG_PCI) += pci_early.c
subdirs-y += oprom dram
ramstage-$(CONFIG_VGA_ROM_RUN) += pci_rom.c
+
+bootblock-$(CONFIG_SOFTWARE_I2C) += software_i2c.c
+romstage-$(CONFIG_SOFTWARE_I2C) += software_i2c.c
+ramstage-$(CONFIG_SOFTWARE_I2C) += software_i2c.c
diff --git a/src/device/software_i2c.c b/src/device/software_i2c.c
new file mode 100644
index 0000000000..6c9c200dc7
--- /dev/null
+++ b/src/device/software_i2c.c
@@ -0,0 +1,345 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
+#include <assert.h>
+#include <timer.h>
+#include <console/console.h>
+#include <device/i2c.h>
+
+/*
+ * The implementation is based on Wikipedia.
+ */
+
+#define DEBUG 0 /* Set to 1 for per-byte output */
+#define SPEW 0 /* Set to 1 for verbose bitwise/line-state output */
+#define DELAY_US 5 /* Default setup delay: 4us (+1 for timer inaccuracy) */
+#define TIMEOUT_US 50000 /* Maximum clock stretching time we want to allow */
+
+#define spew(...) do { if (SPEW) printk(BIOS_SPEW, ##__VA_ARGS__); } while (0)
+
+struct software_i2c_ops *software_i2c[SOFTWARE_I2C_MAX_BUS];
+
+/*
+ * Waits until either timeout_us have passed or (iff for_scl is set) until SCL
+ * goes high. Will report random line changes during the wait and return SCL.
+ */
+static int __wait(unsigned bus, int timeout_us, int for_scl)
+{
+ int us;
+ int sda = software_i2c[bus]->get_sda(bus);
+ int scl = software_i2c[bus]->get_scl(bus);
+ struct mono_time start;
+ timer_monotonic_get(&start);
+
+ do {
+ int old_sda = sda;
+ int old_scl = scl;
+ struct rela_time diff = current_time_from(&start);
+ us = rela_time_in_microseconds(&diff);
+
+ if (old_sda != (sda = software_i2c[bus]->get_sda(bus)))
+ spew("[SDA transitioned to %d after %dus] ", sda, us);
+ if (old_scl != (scl = software_i2c[bus]->get_scl(bus)))
+ spew("[SCL transitioned to %d after %dus] ", scl, us);
+ } while (us < timeout_us && (!for_scl || !scl));
+
+ return scl;
+}
+
+/* Waits the default DELAY_US to allow line state to stabilize. */
+static void wait(unsigned bus)
+{
+ __wait(bus, DELAY_US, 0);
+}
+
+/* Waits until SCL goes high. Prints a contextual error message on timeout. */
+static int wait_for_scl(unsigned bus, const char *error_context)
+{
+ if (!__wait(bus, TIMEOUT_US, 1)) {
+ printk(BIOS_ERR, "software_i2c(%d): ERROR: Clock stretching "
+ "timeout %s!\n", bus, error_context);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int start_cond(unsigned bus)
+{
+ spew("software_i2c(%d): Sending start condition... ", bus);
+
+ /* SDA might not yet be high if repeated start. */
+ software_i2c[bus]->set_sda(bus, 1);
+ wait(bus);
+
+ /* Might need to wait for clock stretching if repeated start. */
+ software_i2c[bus]->set_scl(bus, 1);
+ if (wait_for_scl(bus, "before start condition"))
+ return -1;
+ wait(bus); /* Repeated start setup time, minimum 4.7us */
+
+ if (!software_i2c[bus]->get_sda(bus)) {
+ printk(BIOS_ERR, "software_i2c(%d): Arbitration lost trying "
+ "to send start condition!\n", bus);
+ return -1;
+ }
+
+ /* SCL is high, transition SDA low as first part of start condition. */
+ software_i2c[bus]->set_sda(bus, 0);
+ wait(bus);
+ assert(software_i2c[bus]->get_scl(bus));
+
+ /* Pull SCL low to finish start condition (next pulse will be data). */
+ software_i2c[bus]->set_scl(bus, 0);
+
+ spew("Start condition transmitted!\n");
+ return 0;
+}
+
+static int stop_cond(unsigned bus)
+{
+ spew("software_i2c(%d): Sending stop condition... ", bus);
+
+ /* SDA is unknown, set it to low. SCL must be low. */
+ software_i2c[bus]->set_sda(bus, 0);
+ wait(bus);
+
+ /* Clock stretching */
+ assert(!software_i2c[bus]->get_scl(bus));
+ software_i2c[bus]->set_scl(bus, 1);
+ if (wait_for_scl(bus, "before stop condition"))
+ return -1;
+ wait(bus); /* Stop bit setup time, minimum 4us */
+
+ /* SCL is high, transition SDA high to signal stop condition. */
+ software_i2c[bus]->set_sda(bus, 1);
+ wait(bus);
+ if (!software_i2c[bus]->get_sda(bus)) {
+ printk(BIOS_WARNING, "software_i2c(%d): WARNING: SDA low after "
+ "stop condition... access by another master or line "
+ "stuck from faulty slave?\n", bus);
+ /* Could theoretically happen with multi-master, so no -1. */
+ }
+
+ spew("Stop condition transmitted\n");
+ return 0;
+}
+
+static int out_bit(unsigned bus, int bit)
+{
+ spew("software_i2c(%d): Sending a %d bit... ", bus, bit);
+
+ software_i2c[bus]->set_sda(bus, bit);
+ wait(bus);
+
+ if (bit && !software_i2c[bus]->get_sda(bus)) {
+ printk(BIOS_ERR, "software_i2c(%d): ERROR: SDA wedged low "
+ "by slave before clock pulse on transmit!\n", bus);
+ return -1;
+ }
+
+ /* Clock stretching */
+ assert(!software_i2c[bus]->get_scl(bus));
+ software_i2c[bus]->set_scl(bus, 1);
+ if (wait_for_scl(bus, "on transmit"))
+ return -1;
+ wait(bus);
+
+ if (bit && !software_i2c[bus]->get_sda(bus)) {
+ printk(BIOS_ERR, "software_i2c(%d): ERROR: SDA wedged low "
+ "by slave after clock pulse on transmit!\n", bus);
+ return -1;
+ }
+
+ assert(software_i2c[bus]->get_scl(bus));
+ software_i2c[bus]->set_scl(bus, 0);
+
+ spew("%d bit sent!\n", bit);
+ return 0;
+}
+
+static int in_bit(unsigned bus)
+{
+ int bit;
+
+ spew("software_i2c(%d): Receiving a bit... ", bus);
+
+ /* Let the slave drive data */
+ software_i2c[bus]->set_sda(bus, 1);
+ wait(bus);
+
+ /* Clock stretching */
+ assert(!software_i2c[bus]->get_scl(bus));
+ software_i2c[bus]->set_scl(bus, 1);
+ if (wait_for_scl(bus, "on receive"))
+ return -1;
+
+ /* SCL is high, now data is valid */
+ bit = software_i2c[bus]->get_sda(bus);
+ wait(bus);
+ assert(software_i2c[bus]->get_scl(bus));
+ software_i2c[bus]->set_scl(bus, 0);
+
+ spew("Received a %d!\n", bit);
+
+ return bit;
+}
+
+/* Write a byte to I2C bus. Return 0 if ack by the slave. */
+static int out_byte(unsigned bus, u8 byte)
+{
+ unsigned bit;
+ int nack;
+
+ for (bit = 0; bit < 8; bit++)
+ if (out_bit(bus, (byte >> (7 - bit)) & 0x1) < 0)
+ return -1;
+
+ nack = in_bit(bus);
+
+ if (DEBUG && nack >= 0)
+ printk(BIOS_DEBUG, "software_i2c(%d): wrote byte 0x%02x, "
+ "received %s\n", bus, byte, nack ? "NAK" : "ACK");
+
+ return nack;
+}
+
+static int in_byte(unsigned bus, int ack)
+{
+ u8 byte = 0;
+ int i;
+ for (i = 0; i < 8; ++i) {
+ int bit = in_bit(bus);
+ if (bit < 0)
+ return -1;
+ byte = (byte << 1) | bit;
+ }
+
+ if (out_bit(bus, !ack) < 0)
+ return -1;
+
+ if (DEBUG)
+ printk(BIOS_DEBUG, "software_i2c(%d): read byte 0x%02x, "
+ "sent %s\n", bus, byte, ack ? "ACK" : "NAK");
+
+ return byte;
+}
+
+int software_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count)
+{
+ int i;
+ struct i2c_seg *seg;
+
+ for (seg = segments; seg - segments < count; seg++) {
+ if (start_cond(bus) < 0)
+ return -1;
+ if (out_byte(bus, seg->chip << 1 | !!seg->read) < 0)
+ return -1;
+ for (i = 0; i < seg->len; i++) {
+ int ret;
+ if (seg->read) {
+ ret = in_byte(bus, i < seg->len - 1);
+ seg->buf[i] = (u8)ret;
+ } else {
+ ret = out_byte(bus, seg->buf[i]);
+ }
+ if (ret < 0)
+ return -1;
+ }
+ }
+ if (stop_cond(bus) < 0)
+ return -1;
+
+ return 0;
+}
+
+void software_i2c_wedge_ack(unsigned bus, u8 chip)
+{
+ int i;
+
+ /* Start a command to 'chip'... */
+ start_cond(bus);
+
+ /* Send the address bits but don't yet read the ACK. */
+ chip <<= 1;
+ for (i = 0; i < 8; ++i)
+ out_bit(bus, (chip >> (7 - i)) & 0x1);
+
+ /* Let the slave drive it's ACK but keep the clock high forever. */
+ software_i2c[bus]->set_sda(bus, 1);
+ wait(bus);
+ software_i2c[bus]->set_scl(bus, 1);
+ wait_for_scl(bus, "on wedge_ack()");
+
+ printk(BIOS_INFO, "software_i2c(%d): wedged address write on slave "
+ "ACK. SDA %d, SCL %d\n", bus, software_i2c[bus]->get_sda(bus),
+ software_i2c[bus]->get_scl(bus));
+}
+
+void software_i2c_wedge_read(unsigned bus, u8 chip, u8 reg, int bits)
+{
+ int i;
+
+ /* Start a command to 'chip'... */
+ start_cond(bus);
+ out_byte(bus, chip << 1);
+ /* ...for register 'reg'. */
+ out_byte(bus, reg);
+
+ /* Start a read command... */
+ start_cond(bus);
+ out_byte(bus, chip << 1 | 1);
+
+ /* Read bit_count bits and stop */
+ for (i = 0; i < bits; ++i)
+ in_bit(bus);
+
+ /* Let the slave drive SDA but keep the clock high forever. */
+ software_i2c[bus]->set_sda(bus, 1);
+ wait(bus);
+ software_i2c[bus]->set_scl(bus, 1);
+ wait_for_scl(bus, "on wedge_read()");
+
+ printk(BIOS_INFO, "software_i2c(%d): wedged data read after %d bits. "
+ "SDA %d, SCL %d\n", bus, bits, software_i2c[bus]->get_sda(bus),
+ software_i2c[bus]->get_scl(bus));
+}
+
+void software_i2c_wedge_write(unsigned bus, u8 chip, u8 reg, int bits)
+{
+ int i;
+
+ /* Start a command to 'chip'... */
+ start_cond(bus);
+ out_byte(bus, chip << 1);
+
+ /* Write bit_count register bits and stop */
+ for (i = 0; i < bits; ++i)
+ out_bit(bus, (reg >> (7 - i)) & 0x1);
+
+ /* Pretend to write another 1 bit but keep the clock high forever. */
+ software_i2c[bus]->set_sda(bus, 1);
+ wait(bus);
+ software_i2c[bus]->set_scl(bus, 1);
+ wait_for_scl(bus, "on wedge_write()");
+
+ printk(BIOS_INFO, "software_i2c(%d): wedged data write after %d bits. "
+ "SDA %d, SCL %d\n", bus, bits, software_i2c[bus]->get_sda(bus),
+ software_i2c[bus]->get_scl(bus));
+}