diff options
Diffstat (limited to 'src/devices/pci_device.c')
-rw-r--r-- | src/devices/pci_device.c | 268 |
1 files changed, 0 insertions, 268 deletions
diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c index 4db0102745..c387f3569f 100644 --- a/src/devices/pci_device.c +++ b/src/devices/pci_device.c @@ -496,163 +496,6 @@ static struct device *pci_scan_get_dev(struct device **list, unsigned int devfn) return dev; } -void assign_id_set_links(device_t dev, uint8_t *pos, - uint8_t *previous_pos, unsigned previous_unitid, - unsigned last_unitid, int *reset_needed, - struct device *bus, unsigned *next_unitid) -{ - static const uint8_t link_width_to_pow2[]= { 3, 4, 0, 5, 1, 2, 0, 0 }; - static const uint8_t pow2_to_link_width[] = { 0x7, 4, 5, 0, 1, 3 }; - uint16_t flags; - struct bus prev_bus; - struct device last, previous; - unsigned count; - uint8_t present_width_cap; - uint16_t present_freq_cap; - uint8_t upstream_width_cap; - uint16_t upstream_freq_cap; - uint8_t ln_upstream_width_in, ln_present_width_in; - uint8_t ln_upstream_width_out, ln_present_width_out; - uint16_t mask; - uint8_t freq; - uint8_t old_freq; - uint8_t upstream_width, present_width; - uint8_t old_width; - - flags = pci_read_config16(dev, (*pos) + PCI_CAP_FLAGS); - printk_debug("flags: 0x%04x\n", (unsigned)flags); - if ((flags >> 13) != 0) - return; /* Entry is a Host */ - /* Entry is a Slave secondary */ - flags &= ~0x1f; /* mask out base unit ID */ - flags |= *next_unitid & 0x1f; /* assign ID */ - count = (flags >> 5) & 0x1f; /* get unit count */ - printk_debug("unitid: 0x%02x, count: 0x%02x\n", - *next_unitid, count); - pci_write_config16(dev, (*pos) + PCI_CAP_FLAGS, flags); - *next_unitid += count; - if (previous_unitid == 0) { /* the link is back to the host */ - prev_bus.secondary = 0; - /* calculate the previous pos for the host */ - *previous_pos = 0x80; - previous.bus = &prev_bus; - previous.path.type = DEVICE_PATH_PCI; - previous.path.u.pci.devfn = 0x18 << 3; - #warning "FIXME we should not hard code this!" - } else { - previous.bus = bus; - previous.path.type = DEVICE_PATH_PCI; - previous.path.u.pci.devfn = previous_unitid << 3; - } - last.bus = bus; - last.path.type = DEVICE_PATH_PCI; - last.path.u.pci.devfn = last_unitid << 3; - /* Set link width and frequency */ - present_freq_cap = pci_read_config16(&last, - (*pos) + PCI_HT_CAP_SLAVE_FREQ_CAP0); - present_width_cap = pci_read_config8(&last, - (*pos) + PCI_HT_CAP_SLAVE_WIDTH0); - if(previous_unitid == 0) { /* the link is back to the host */ - upstream_freq_cap = pci_read_config16(&previous, - (*previous_pos) + PCI_HT_CAP_HOST_FREQ_CAP); - upstream_width_cap = pci_read_config8(&previous, - (*previous_pos) + PCI_HT_CAP_HOST_WIDTH); - } - else { /* The link is back up the chain */ - upstream_freq_cap = pci_read_config16(&previous, - (*previous_pos) + PCI_HT_CAP_SLAVE_FREQ_CAP1); - upstream_width_cap = pci_read_config8(&previous, - (*previous_pos) + PCI_HT_CAP_SLAVE_WIDTH1); - } - /* Calculate the highest possible frequency */ - /* Errata for 8131 - freq 5 has hardware problems don't support it */ - freq = log2(present_freq_cap & upstream_freq_cap & 0x1f); - - /* Calculate the highest width */ - ln_upstream_width_in = link_width_to_pow2[upstream_width_cap & 7]; - ln_present_width_out = link_width_to_pow2[(present_width_cap >> 4) & 7]; - if (ln_upstream_width_in > ln_present_width_out) { - ln_upstream_width_in = ln_present_width_out; - } - upstream_width = pow2_to_link_width[ln_upstream_width_in]; - present_width = pow2_to_link_width[ln_upstream_width_in] << 4; - - ln_upstream_width_out = link_width_to_pow2[(upstream_width_cap >> 4) & 7]; - ln_present_width_in = link_width_to_pow2[present_width_cap & 7]; - if (ln_upstream_width_out > ln_present_width_in) { - ln_upstream_width_out = ln_present_width_in; - } - upstream_width |= pow2_to_link_width[ln_upstream_width_out] << 4; - present_width |= pow2_to_link_width[ln_upstream_width_out]; - - /* set the present device */ - old_freq = pci_read_config8(&last, (*pos) + PCI_HT_CAP_SLAVE_FREQ0); - if(old_freq != freq) { - pci_write_config8(&last, - (*pos) + PCI_HT_CAP_SLAVE_FREQ0, freq); - *reset_needed = 1; - printk_debug("HyperT FreqP old %x new %x\n",old_freq,freq); - } - old_width = pci_read_config8(&last, - (*pos) + PCI_HT_CAP_SLAVE_WIDTH0 + 1); - if(present_width != old_width) { - pci_write_config8(&last, - (*pos) + PCI_HT_CAP_SLAVE_WIDTH0 + 1, present_width); - *reset_needed = 1; - printk_debug("HyperT widthP old %x new %x\n", - old_width, present_width); - } - /* set the upstream device */ - if(previous_unitid == 0) { /* the link is back to the host */ - old_freq = pci_read_config8(&previous, - (*previous_pos) + PCI_HT_CAP_HOST_FREQ); - old_freq &= 0x0f; - if(freq != old_freq) { - pci_write_config8(&previous, - (*previous_pos) + PCI_HT_CAP_HOST_FREQ, freq); - *reset_needed = 1; - printk_debug("HyperT freqUH old %x new %x\n", - old_freq, freq); - } - old_width = pci_read_config8(&previous, - (*previous_pos) + PCI_HT_CAP_HOST_WIDTH + 1); - if(upstream_width != old_width) { - pci_write_config8(&previous, - (*previous_pos) + PCI_HT_CAP_HOST_WIDTH + 1, - upstream_width); - *reset_needed = 1; - printk_debug("HyperT widthUH old %x new %x\n", - old_width, upstream_width); - } - } - else { /* The link is back up the chain */ - old_freq = pci_read_config8(&previous, - (*previous_pos) + PCI_HT_CAP_SLAVE_FREQ1); - old_freq &= 0x0f; - if(freq != old_freq) { - pci_write_config8(&previous, - (*previous_pos) + PCI_HT_CAP_SLAVE_FREQ1, - freq); - *reset_needed = 1; - printk_debug("HyperT freqUL old %x new %x\n", - old_freq, freq); - } - old_width = pci_read_config8(&previous, - (*previous_pos) + PCI_HT_CAP_SLAVE_WIDTH1 + 1); - if(upstream_width != old_width) { - pci_write_config8(&previous, - (*previous_pos) + PCI_HT_CAP_SLAVE_WIDTH1, - upstream_width); - *reset_needed = 1; - printk_debug("HyperT widthUL old %x new %x\n", - old_width, upstream_width); - } - } - *previous_pos = *pos; - *pos=0; -} - -#define HYPERTRANSPORT_SUPPORT 1 /** Scan the pci bus devices and bridges. * @param bus pointer to the bus structure * @param min_devfn minimum devfn to look at in the scan usually 0x00 @@ -668,11 +511,6 @@ unsigned int pci_scan_bus(struct bus *bus, device_t dev; device_t old_devices; device_t child; -#if HYPERTRANSPORT_SUPPORT - unsigned next_unitid, last_unitid, previous_unitid; - int reset_needed = 0; - uint8_t previous_pos; -#endif printk_debug("PCI: pci_scan_bus for bus %d\n", bus->secondary); @@ -682,112 +520,6 @@ unsigned int pci_scan_bus(struct bus *bus, post_code(0x24); -#if HYPERTRANSPORT_SUPPORT - /* Spin through the devices and collapse any early - * hypertransport enumeration. - */ - for(devfn = min_devfn; devfn <= max_devfn; devfn += 8) { - struct device dummy; - uint32_t id; - uint8_t hdr_type, pos; - dummy.bus = bus; - dummy.path.type = DEVICE_PATH_PCI; - dummy.path.u.pci.devfn = devfn; - id = pci_read_config32(&dummy, PCI_VENDOR_ID); - if ( (id == 0xffffffff) || (id == 0x00000000) || - (id == 0x0000ffff) || (id == 0xffff0000)) { - continue; - } - hdr_type = pci_read_config8(&dummy, PCI_HEADER_TYPE); - pos = 0; - switch(hdr_type & 0x7f) { - case PCI_HEADER_TYPE_NORMAL: - case PCI_HEADER_TYPE_BRIDGE: - pos = PCI_CAPABILITY_LIST; - break; - } - if (pos > PCI_CAP_LIST_NEXT) { - pos = pci_read_config8(&dummy, pos); - } - while(pos != 0) { - uint8_t cap; - cap = pci_read_config8(&dummy, pos + PCI_CAP_LIST_ID); - printk_debug("Capability: 0x%02x @ 0x%02x\n", cap, pos); - if (cap == PCI_CAP_ID_HT) { - uint16_t flags; - flags = pci_read_config16(&dummy, - pos + PCI_CAP_FLAGS); - printk_debug("flags: 0x%04x\n", - (unsigned)flags); - if ((flags >> 13) == 0) { - /* Clear the unitid */ - flags &= ~0x1f; - pci_write_config16(&dummy, - pos + PCI_CAP_FLAGS, flags); - break; - } - } - pos = pci_read_config8(&dummy, pos + PCI_CAP_LIST_NEXT); - } - } - /* If present assign unitid to a hypertransport chain */ - last_unitid = 0; - next_unitid = 1; - previous_pos = 0; - do { - struct device dummy; - uint32_t id; - uint8_t hdr_type, pos; - - previous_unitid = last_unitid; - last_unitid = next_unitid; - - /* Read the next unassigned device off the stack */ - dummy.bus = bus; - dummy.path.type = DEVICE_PATH_PCI; - dummy.path.u.pci.devfn = 0; - id = pci_read_config32(&dummy, PCI_VENDOR_ID); - /* If the chain is enumerated quit */ - if (id == 0xffffffff || id == 0x00000000 || - id == 0x0000ffff || id == 0xffff0000) { - break; - } - hdr_type = pci_read_config8(&dummy, PCI_HEADER_TYPE); - pos = 0; - switch(hdr_type & 0x7f) { - case PCI_HEADER_TYPE_NORMAL: - case PCI_HEADER_TYPE_BRIDGE: - pos = PCI_CAPABILITY_LIST; - break; - } - if (pos > PCI_CAP_LIST_NEXT) { - pos = pci_read_config8(&dummy, pos); - } - while(pos != 0) { /* loop through the linked list */ - uint8_t cap; - cap = pci_read_config8(&dummy, pos + PCI_CAP_LIST_ID); - printk_debug("Capability: 0x%02x @ 0x%02x\n", cap, pos); - if (cap == PCI_CAP_ID_HT) { - assign_id_set_links(&dummy,&pos,&previous_pos, - previous_unitid, last_unitid, - &reset_needed, bus, - &next_unitid); - } - if(pos) - pos = pci_read_config8(&dummy, - pos + PCI_CAP_LIST_NEXT); - } - } while((last_unitid != next_unitid) && (next_unitid <= 0x1f)); -#if HAVE_HARD_RESET == 1 - if(reset_needed) { - printk_debug("HyperT reset needed\n"); - boot_successful(); - hard_reset(); - } - printk_debug("HyperT reset not needed\n"); -#endif /* HAVE_HARD_RESET */ -#endif /* HYPERTRANSPORT_SUPPORT */ - /* probe all devices on this bus with some optimization for non-existance and single funcion devices */ for (devfn = min_devfn; devfn <= max_devfn; devfn++) { |