diff options
Diffstat (limited to 'src/devices')
28 files changed, 160 insertions, 160 deletions
diff --git a/src/devices/cardbus_device.c b/src/devices/cardbus_device.c index becdafd42f..044dfd274f 100644 --- a/src/devices/cardbus_device.c +++ b/src/devices/cardbus_device.c @@ -159,8 +159,8 @@ void cardbus_enable_resources(device_t dev) uint16_t ctrl; ctrl = pci_read_config16(dev, PCI_CB_BRIDGE_CONTROL); ctrl |= (dev->link[0].bridge_ctrl & ( - PCI_BRIDGE_CTL_PARITY | - PCI_BRIDGE_CTL_SERR | + PCI_BRIDGE_CTL_PARITY | + PCI_BRIDGE_CTL_SERR | PCI_BRIDGE_CTL_NO_ISA | PCI_BRIDGE_CTL_VGA | PCI_BRIDGE_CTL_MASTER_ABORT | @@ -174,8 +174,8 @@ void cardbus_enable_resources(device_t dev) enable_childrens_resources(dev); } -unsigned int cardbus_scan_bus(struct bus *bus, - unsigned min_devfn, unsigned max_devfn, +unsigned int cardbus_scan_bus(struct bus *bus, + unsigned min_devfn, unsigned max_devfn, unsigned int max) { return pci_scan_bus(bus, min_devfn, max_devfn, max); @@ -196,7 +196,7 @@ unsigned int cardbus_scan_bridge(device_t dev, unsigned int max) /* Set up the primary, secondary and subordinate bus numbers. We have * no idea how many buses are behind this bridge yet, so we set the - * subordinate bus number to 0xff for the moment. + * subordinate bus number to 0xff for the moment. */ bus->secondary = ++max; bus->subordinate = 0xff; @@ -222,7 +222,7 @@ unsigned int cardbus_scan_bridge(device_t dev, unsigned int max) ((unsigned int) (bus->subordinate) << 16)); pci_write_config32(dev, PCI_CB_PRIMARY_BUS, buses); - /* Now we can scan all subordinate buses + /* Now we can scan all subordinate buses * i.e. the bus behind the bridge. */ max = cardbus_scan_bus(bus, 0x00, 0xff, max); @@ -235,7 +235,7 @@ unsigned int cardbus_scan_bridge(device_t dev, unsigned int max) ((unsigned int) (bus->subordinate) << 16); pci_write_config32(dev, PCI_CB_PRIMARY_BUS, buses); pci_write_config16(dev, PCI_COMMAND, cr); - + printk(BIOS_SPEW, "%s returns max %d\n", __func__, max); return max; } diff --git a/src/devices/device_util.c b/src/devices/device_util.c index e44a02e428..3e8cba2f98 100644 --- a/src/devices/device_util.c +++ b/src/devices/device_util.c @@ -79,7 +79,7 @@ struct device *dev_find_slot(unsigned int bus, unsigned int devfn) result = 0; for (dev = all_devices; dev; dev = dev->next) { if ((dev->path.type == DEVICE_PATH_PCI) && - (dev->bus->secondary == bus) && + (dev->bus->secondary == bus) && (dev->path.pci.devfn == devfn)) { result = dev; break; @@ -92,32 +92,32 @@ struct device *dev_find_slot(unsigned int bus, unsigned int devfn) * @brief Given a smbus bus and a device number, find the device structure * * @param bus The bus number - * @param addr a device number + * @param addr a device number * @return pointer to the device structure */ struct device *dev_find_slot_on_smbus(unsigned int bus, unsigned int addr) { struct device *dev, *result; - + result = 0; for (dev = all_devices; dev; dev = dev->next) { if ((dev->path.type == DEVICE_PATH_I2C) && - (dev->bus->secondary == bus) && + (dev->bus->secondary == bus) && (dev->path.i2c.device == addr)) { result = dev; - break; - } - } + break; + } + } return result; -} +} /** Find a device of a given vendor and type * @param vendor Vendor ID (e.g. 0x8086 for Intel) * @param device Device ID * @param from Pointer to the device structure, used as a starting point - * in the linked list of all_devices, which can be 0 to start at the + * in the linked list of all_devices, which can be 0 to start at the * head of the list (i.e. all_devices) - * @return Pointer to the device struct + * @return Pointer to the device struct */ struct device *dev_find_device(unsigned int vendor, unsigned int device, struct device *from) { @@ -134,9 +134,9 @@ struct device *dev_find_device(unsigned int vendor, unsigned int device, struct /** Find a device of a given class * @param class Class of the device * @param from Pointer to the device structure, used as a starting point - * in the linked list of all_devices, which can be 0 to start at the + * in the linked list of all_devices, which can be 0 to start at the * head of the list (i.e. all_devices) - * @return Pointer to the device struct + * @return Pointer to the device struct */ struct device *dev_find_class(unsigned int class, struct device *from) { @@ -167,11 +167,11 @@ const char *dev_path(device_t dev) case DEVICE_PATH_PCI: #if CONFIG_PCI_BUS_SEGN_BITS sprintf(buffer, "PCI: %04x:%02x:%02x.%01x", - dev->bus->secondary>>8, dev->bus->secondary & 0xff, + dev->bus->secondary>>8, dev->bus->secondary & 0xff, PCI_SLOT(dev->path.pci.devfn), PCI_FUNC(dev->path.pci.devfn)); #else sprintf(buffer, "PCI: %02x:%02x.%01x", - dev->bus->secondary, + dev->bus->secondary, PCI_SLOT(dev->path.pci.devfn), PCI_FUNC(dev->path.pci.devfn)); #endif break; @@ -408,7 +408,7 @@ resource_t resource_end(struct resource *resource) * the bridge. While the granularity is simply how many low bits of the * address cannot be set. */ - + /* Get the end (rounded up) */ end = base + align_up(resource->size, resource->gran) - 1; @@ -468,7 +468,7 @@ void report_resource_stored(device_t dev, struct resource *resource, const char sprintf(buf, "bus %02x ", dev->link[0].secondary); #endif } - printk(BIOS_DEBUG, + printk(BIOS_DEBUG, "%s %02lx <- [0x%010Lx - 0x%010Lx] size 0x%08Lx gran 0x%02x %s%s%s\n", dev_path(dev), resource->index, diff --git a/src/devices/hypertransport.c b/src/devices/hypertransport.c index bb91249908..674971cb94 100644 --- a/src/devices/hypertransport.c +++ b/src/devices/hypertransport.c @@ -39,7 +39,7 @@ * so don't do it again */ #define OPT_HT_LINK 0 - + #if OPT_HT_LINK == 1 #include <cpu/amd/model_fxx_rev.h> #endif @@ -52,9 +52,9 @@ static device_t ht_scan_get_devs(device_t *old_devices) /* Extract the chain of devices to (first through last) * for the next hypertransport device. */ - while(last && last->sibling && + while(last && last->sibling && (last->sibling->path.type == DEVICE_PATH_PCI) && - (last->sibling->path.pci.devfn > last->path.pci.devfn)) + (last->sibling->path.pci.devfn > last->path.pci.devfn)) { last = last->sibling; } @@ -101,11 +101,11 @@ static unsigned ht_read_freq_cap(device_t dev, unsigned pos) } /* AMD K8 Unsupported 1Ghz? */ if ((dev->vendor == PCI_VENDOR_ID_AMD) && (dev->device == 0x1100)) { -#if CONFIG_K8_HT_FREQ_1G_SUPPORT == 1 - #if CONFIG_K8_REV_F_SUPPORT == 0 +#if CONFIG_K8_HT_FREQ_1G_SUPPORT == 1 + #if CONFIG_K8_REV_F_SUPPORT == 0 if (is_cpu_pre_e0()) { // only e0 later suupport 1GHz HT freq_cap &= ~(1 << HT_FREQ_1000Mhz); - } + } #endif #else freq_cap &= ~(1 << HT_FREQ_1000Mhz); @@ -129,7 +129,7 @@ static int ht_setup_link(struct ht_link *prev, device_t dev, unsigned pos) static const uint8_t pow2_to_link_width[] = { 0x7, 4, 5, 0, 1, 3 }; unsigned present_width_cap, upstream_width_cap; unsigned present_freq_cap, upstream_freq_cap; - unsigned ln_present_width_in, ln_upstream_width_in; + unsigned ln_present_width_in, ln_upstream_width_in; unsigned ln_present_width_out, ln_upstream_width_out; unsigned freq, old_freq; unsigned present_width, upstream_width, old_width; @@ -140,7 +140,7 @@ static int ht_setup_link(struct ht_link *prev, device_t dev, unsigned pos) /* Set the hypertransport link width and frequency */ reset_needed = 0; - /* See which side of the device our previous write to + /* See which side of the device our previous write to * set the unitid came from. */ cur->dev = dev; @@ -164,7 +164,7 @@ static int ht_setup_link(struct ht_link *prev, device_t dev, unsigned pos) upstream_freq_cap = ht_read_freq_cap(prev->dev, prev->pos + prev->freq_cap_off); present_width_cap = pci_read_config8(cur->dev, cur->pos + cur->config_off); upstream_width_cap = pci_read_config8(prev->dev, prev->pos + prev->config_off); - + /* Calculate the highest useable frequency */ freq = log2(present_freq_cap & upstream_freq_cap); @@ -242,7 +242,7 @@ static int ht_setup_link(struct ht_link *prev, device_t dev, unsigned pos) } } #endif - + /* Remember the current link as the previous link, * But look at the other offsets. */ @@ -261,7 +261,7 @@ static int ht_setup_link(struct ht_link *prev, device_t dev, unsigned pos) } return reset_needed; - + } static unsigned ht_lookup_slave_capability(struct device *dev) @@ -355,7 +355,7 @@ static void ht_collapse_early_enumeration(struct bus *bus, unsigned offset_uniti dummy.path.type = DEVICE_PATH_PCI; dummy.path.pci.devfn = devfn; id = pci_read_config32(&dummy, PCI_VENDOR_ID); - if ( (id == 0xffffffff) || (id == 0x00000000) || + if ( (id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { continue; } @@ -371,12 +371,12 @@ static void ht_collapse_early_enumeration(struct bus *bus, unsigned offset_uniti flags = pci_read_config16(&dummy, pos + PCI_CAP_FLAGS); flags &= ~0x1f; pci_write_config16(&dummy, pos + PCI_CAP_FLAGS, flags); - printk(BIOS_SPEW, "Collapsing %s [%04x/%04x]\n", + printk(BIOS_SPEW, "Collapsing %s [%04x/%04x]\n", dev_path(&dummy), dummy.vendor, dummy.device); } } -unsigned int hypertransport_scan_chain(struct bus *bus, +unsigned int hypertransport_scan_chain(struct bus *bus, unsigned min_devfn, unsigned max_devfn, unsigned int max, unsigned *ht_unitid_base, unsigned offset_unitid) { //even CONFIG_HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link @@ -410,7 +410,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, prev.config_off = PCI_HT_CAP_HOST_WIDTH; prev.freq_off = PCI_HT_CAP_HOST_FREQ; prev.freq_cap_off = PCI_HT_CAP_HOST_FREQ_CAP; - + /* If present assign unitid to a hypertransport chain */ last_unitid = min_unitid -1; max_unitid = next_unitid = min_unitid; @@ -446,7 +446,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, } } } while((ctrl & (1 << 5)) == 0); - + /* Get and setup the device_structure */ dev = ht_scan_get_devs(&old_devices); @@ -462,15 +462,15 @@ unsigned int hypertransport_scan_chain(struct bus *bus, /* Find the hypertransport link capability */ pos = ht_lookup_slave_capability(dev); if (pos == 0) { - printk(BIOS_ERR, "%s Hypertransport link capability not found", + printk(BIOS_ERR, "%s Hypertransport link capability not found", dev_path(dev)); break; } - + /* Update the Unitid of the current device */ flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS); - - /* If the devices has a unitid set and is at devfn 0 we are done. + + /* If the devices has a unitid set and is at devfn 0 we are done. * This can happen with shadow hypertransport devices, * or if we have reached the bottom of a * hypertransport device chain. @@ -492,7 +492,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, } } - } + } #endif flags |= next_unitid & 0x1f; @@ -502,12 +502,12 @@ unsigned int hypertransport_scan_chain(struct bus *bus, static_count = 1; for(func = dev; func; func = func->sibling) { func->path.pci.devfn += (next_unitid << 3); - static_count = (func->path.pci.devfn >> 3) + static_count = (func->path.pci.devfn >> 3) - (dev->path.pci.devfn >> 3) + 1; last_func = func; } /* Compute the number of unitids consumed */ - printk(BIOS_SPEW, "%s count: %04x static_count: %04x\n", + printk(BIOS_SPEW, "%s count: %04x static_count: %04x\n", dev_path(dev), count, static_count); if (count < static_count) { count = static_count; @@ -534,7 +534,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, printk(BIOS_DEBUG, "%s [%04x/%04x] %s next_unitid: %04x\n", dev_path(dev), - dev->vendor, dev->device, + dev->vendor, dev->device, (dev->enabled? "enabled": "disabled"), next_unitid); } while (last_unitid != next_unitid); @@ -562,7 +562,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, } ht_unitid_base[ht_dev_num-1] = CONFIG_HT_CHAIN_END_UNITID_BASE; // update last one - + printk(BIOS_DEBUG, " unitid: %04x --> %04x\n", real_last_unitid, CONFIG_HT_CHAIN_END_UNITID_BASE); @@ -573,11 +573,11 @@ unsigned int hypertransport_scan_chain(struct bus *bus, if (next_unitid > 0x20) { next_unitid = 0x20; } - if( (bus->secondary == 0) && (next_unitid > 0x18)) { + if( (bus->secondary == 0) && (next_unitid > 0x18)) { next_unitid = 0x18; /* avoid K8 on bus 0 */ } - /* Die if any leftover Static devices are are found. + /* Die if any leftover Static devices are are found. * There's probably a problem in the Config.lb. */ if(old_devices) { @@ -587,14 +587,14 @@ unsigned int hypertransport_scan_chain(struct bus *bus, } printk(BIOS_ERR, "HT: Left over static devices. Check your Config.lb\n"); if(last_func && !last_func->sibling) // put back the left over static device, and let pci_scan_bus disable it - last_func->sibling = old_devices; + last_func->sibling = old_devices; } /* Now that nothing is overlapping it is safe to scan the - * children. + * children. */ - max = pci_scan_bus(bus, 0x00, ((next_unitid-1) << 3)|7, max); - return max; + max = pci_scan_bus(bus, 0x00, ((next_unitid-1) << 3)|7, max); + return max; } /** diff --git a/src/devices/oprom/include/x86emu/regs.h b/src/devices/oprom/include/x86emu/regs.h index 516b2ea836..d738974d4b 100644 --- a/src/devices/oprom/include/x86emu/regs.h +++ b/src/devices/oprom/include/x86emu/regs.h @@ -106,7 +106,7 @@ struct i386_special_regs { u32 FLAGS; }; -/* +/* * Segment registers here represent the 16 bit quantities * CS, DS, ES, SS. */ @@ -184,8 +184,8 @@ struct i386_segment_regs { #define F_ALWAYS_ON (0x0002) /* flag bits always on */ /* - * Define a mask for only those flag bits we will ever pass back - * (via PUSHF) + * Define a mask for only those flag bits we will ever pass back + * (via PUSHF) */ #define F_MSK (FB_CF|FB_PF|FB_AF|FB_ZF|FB_SF|FB_TF|FB_IF|FB_DF|FB_OF) @@ -271,8 +271,8 @@ typedef struct { * Delayed flag set 3 bits (zero, signed, parity) * reserved 6 bits * interrupt # 8 bits instruction raised interrupt - * BIOS video segregs 4 bits - * Interrupt Pending 1 bits + * BIOS video segregs 4 bits + * Interrupt Pending 1 bits * Extern interrupt 1 bits * Halted 1 bits */ diff --git a/src/devices/oprom/include/x86emu/x86emu.h b/src/devices/oprom/include/x86emu/x86emu.h index 493e494927..3ceee4985b 100644 --- a/src/devices/oprom/include/x86emu/x86emu.h +++ b/src/devices/oprom/include/x86emu/x86emu.h @@ -128,7 +128,7 @@ extern u32 X86API rdl(u32 addr); extern void X86API wrb(u32 addr, u8 val); extern void X86API wrw(u32 addr, u16 val); extern void X86API wrl(u32 addr, u32 val); - + #pragma pack() /*--------------------- type definitions -----------------------------------*/ @@ -175,10 +175,10 @@ void X86EMU_halt_sys(void); #define DEBUG_SYSINT_F 0x000200 /* bios system interrupts. */ #define DEBUG_TRACECALL_F 0x000400 #define DEBUG_INSTRUMENT_F 0x000800 -#define DEBUG_MEM_TRACE_F 0x001000 -#define DEBUG_IO_TRACE_F 0x002000 +#define DEBUG_MEM_TRACE_F 0x001000 +#define DEBUG_IO_TRACE_F 0x002000 #define DEBUG_TRACECALL_REGS_F 0x004000 -#define DEBUG_DECODE_NOPRINT_F 0x008000 +#define DEBUG_DECODE_NOPRINT_F 0x008000 #define DEBUG_SAVE_IP_CS_F 0x010000 #define DEBUG_TRACEJMP_F 0x020000 #define DEBUG_TRACEJMP_REGS_F 0x040000 diff --git a/src/devices/oprom/x86.c b/src/devices/oprom/x86.c index 9e72a4a6a6..4d9604a581 100644 --- a/src/devices/oprom/x86.c +++ b/src/devices/oprom/x86.c @@ -45,16 +45,16 @@ int (*intXX_handler[256])(struct eregs *regs) = { NULL }; static int intXX_exception_handler(struct eregs *regs) { - printk(BIOS_INFO, "Oops, exception %d while executing option rom\n", + printk(BIOS_INFO, "Oops, exception %d while executing option rom\n", regs->vector); - x86_exception(regs); // Call coreboot exception handler + x86_exception(regs); // Call coreboot exception handler return 0; // Never returns? } static int intXX_unknown_handler(struct eregs *regs) { - printk(BIOS_INFO, "Unsupported software interrupt #0x%x\n", + printk(BIOS_INFO, "Unsupported software interrupt #0x%x\n", regs->vector); return -1; @@ -74,12 +74,12 @@ static void setup_interrupt_handlers(void) { int i; - /* The first 16 intXX functions are not BIOS services, + /* The first 16 intXX functions are not BIOS services, * but the CPU-generated exceptions ("hardware interrupts") */ for (i = 0; i < 0x10; i++) intXX_handler[i] = &intXX_exception_handler; - + /* Mark all other intXX calls as unknown first */ for (i = 0x10; i < 0x100; i++) { @@ -133,14 +133,14 @@ static void setup_realmode_idt(void) } /* Many option ROMs use the hard coded interrupt entry points in the - * system bios. So install them at the known locations. + * system bios. So install them at the known locations. */ - + /* int42 is the relocated int10 */ write_idt_stub((void *)0xff065, 0x42); /* VIA's VBIOS calls f000:f859 instead of int15 */ - write_idt_stub((void *)0xff859, 0x15); + write_idt_stub((void *)0xff859, 0x15); } void run_bios(struct device *dev, unsigned long addr) @@ -187,7 +187,7 @@ static u32 VSA_vrRead(u16 classIndex) "outl %%eax, %%dx\n" "addb $2, %%dl\n" "inw %%dx, %%ax\n" - : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx) + : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx) : "a"(classIndex) ); @@ -245,7 +245,7 @@ void do_vsmbios(void) } #endif -/* interrupt_handler() is called from assembler code only, +/* interrupt_handler() is called from assembler code only, * so there is no use in putting the prototype into a header file. */ int __attribute__((regparm(0))) interrupt_handler(u32 intnumber, @@ -308,7 +308,7 @@ int __attribute__((regparm(0))) interrupt_handler(u32 intnumber, // will later pop them. // What happens here is that we force (volatile!) changing // the values of the parameters of this function. We do this - // because we know that they stay alive on the stack after + // because we know that they stay alive on the stack after // we leave this function. Don't say this is bollocks. *(volatile u32 *)&eax = reg_info.eax; *(volatile u32 *)&ecx = reg_info.ecx; diff --git a/src/devices/oprom/x86_asm.S b/src/devices/oprom/x86_asm.S index 724fe02c0d..469c42f90b 100644 --- a/src/devices/oprom/x86_asm.S +++ b/src/devices/oprom/x86_asm.S @@ -25,7 +25,7 @@ /* This is the intXX interrupt handler stub code. It gets copied * to the IDT and to some fixed addresses in the F segment. Before - * the code can used, it gets patched up by the C function copying + * the code can used, it gets patched up by the C function copying * it: byte 3 (the $0 in movb $0, %al) is overwritten with the int#. */ @@ -85,11 +85,11 @@ __run_optionrom = RELOCATED(.) * protected mode is turned off. */ mov $0x30, %ax - mov %ax, %ds - mov %ax, %es - mov %ax, %fs - mov %ax, %gs - mov %ax, %ss + mov %ax, %ds + mov %ax, %es + mov %ax, %fs + mov %ax, %gs + mov %ax, %ss /* Turn off protection */ movl %cr0, %eax @@ -114,9 +114,9 @@ __run_optionrom = RELOCATED(.) lidt __realmode_idt /* Set all segments to 0x0000, ds to 0x0040 */ - mov %ax, %es - mov %ax, %fs - mov %ax, %gs + mov %ax, %es + mov %ax, %fs + mov %ax, %gs mov $0x40, %ax mov %ax, %ds @@ -140,8 +140,8 @@ __run_optionrom = RELOCATED(.) data32 ljmp $0x10, $RELOCATED(1f) 1: .code32 - movw $0x18, %ax - mov %ax, %ds + movw $0x18, %ax + mov %ax, %ds mov %ax, %es mov %ax, %fs mov %ax, %gs @@ -185,11 +185,11 @@ __run_vsa = RELOCATED(.) * protected mode is turned off. */ mov $0x30, %ax - mov %ax, %ds - mov %ax, %es - mov %ax, %fs - mov %ax, %gs - mov %ax, %ss + mov %ax, %ds + mov %ax, %es + mov %ax, %fs + mov %ax, %gs + mov %ax, %ss /* Turn off protection */ movl %cr0, %eax @@ -214,9 +214,9 @@ __run_vsa = RELOCATED(.) lidt __realmode_idt /* Set all segments to 0x0000, ds to 0x0040 */ - mov %ax, %es - mov %ax, %fs - mov %ax, %gs + mov %ax, %es + mov %ax, %fs + mov %ax, %gs mov $0x40, %ax mov %ax, %ds mov %cx, %ax // restore ax @@ -238,8 +238,8 @@ __run_vsa = RELOCATED(.) data32 ljmp $0x10, $RELOCATED(1f) 1: .code32 - movw $0x18, %ax - mov %ax, %ds + movw $0x18, %ax + mov %ax, %ds mov %ax, %es mov %ax, %fs mov %ax, %gs @@ -275,17 +275,17 @@ __run_interrupt = RELOCATED(.) * descriptors. They will retain these configurations (limits, * writability, etc.) once protected mode is turned off. */ - mov $0x30, %ax - mov %ax, %ds - mov %ax, %es - mov %ax, %fs - mov %ax, %gs - mov %ax, %ss + mov $0x30, %ax + mov %ax, %ds + mov %ax, %es + mov %ax, %fs + mov %ax, %gs + mov %ax, %ss /* Turn off protected mode */ - movl %cr0, %eax + movl %cr0, %eax andl $~PE, %eax - movl %eax, %cr0 + movl %eax, %cr0 /* Now really going into real mode */ data32 ljmp $0, $RELOCATED(1f) @@ -302,7 +302,7 @@ __run_interrupt = RELOCATED(.) movl %eax, %esp /* Load 16-bit intXX IDT */ - xor %ax, %ax + xor %ax, %ax mov %ax, %ds lidt __realmode_idt diff --git a/src/devices/oprom/x86_interrupts.c b/src/devices/oprom/x86_interrupts.c index 90156334dc..49d69ee3a7 100644 --- a/src/devices/oprom/x86_interrupts.c +++ b/src/devices/oprom/x86_interrupts.c @@ -202,7 +202,7 @@ int int15_handler(struct eregs *regs) res = 0; break; default: - printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", + printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", regs->eax & 0xffff); } diff --git a/src/devices/oprom/x86emu/decode.c b/src/devices/oprom/x86emu/decode.c index 3d2ba23566..ed96dc66e6 100644 --- a/src/devices/oprom/x86emu/decode.c +++ b/src/devices/oprom/x86emu/decode.c @@ -732,7 +732,7 @@ RETURNS: Value of scale * index REMARKS: -Decodes scale/index of SIB byte and returns relevant offset part of +Decodes scale/index of SIB byte and returns relevant offset part of effective address. ****************************************************************************/ static unsigned decode_sib_si( diff --git a/src/devices/oprom/x86emu/ops2.c b/src/devices/oprom/x86emu/ops2.c index f5cb6498b1..349a664f50 100644 --- a/src/devices/oprom/x86emu/ops2.c +++ b/src/devices/oprom/x86emu/ops2.c @@ -170,7 +170,7 @@ static void x86emuOp2_rdmsr(u8 op2) M.x86.R_EAX = 0; DECODE_CLEAR_SEGOVR(); END_OF_INSTR(); -} +} #define xorl(a,b) (((a) && !(b)) || (!(a) && (b))) diff --git a/src/devices/oprom/x86emu/sys.c b/src/devices/oprom/x86emu/sys.c index 957e0ca63b..7a9e3921ec 100644 --- a/src/devices/oprom/x86emu/sys.c +++ b/src/devices/oprom/x86emu/sys.c @@ -85,7 +85,7 @@ RETURNS: Byte value read from emulator memory. REMARKS: -Reads a byte value from the emulator memory. +Reads a byte value from the emulator memory. ****************************************************************************/ u8 X86API rdb(u32 addr) { @@ -130,7 +130,7 @@ addr - Emulator memory address to read RETURNS: Long value read from emulator memory. REMARKS: -Reads a long value from the emulator memory. +Reads a long value from the emulator memory. ****************************************************************************/ u32 X86API rdl(u32 addr) { @@ -189,7 +189,7 @@ addr - Emulator memory address to read val - Value to store REMARKS: -Writes a long value to emulator memory. +Writes a long value to emulator memory. ****************************************************************************/ void X86API wrl(u32 addr, u32 val) { diff --git a/src/devices/oprom/x86emu/x86emui.h b/src/devices/oprom/x86emu/x86emui.h index d693e335f4..8ad43bfa30 100644 --- a/src/devices/oprom/x86emu/x86emui.h +++ b/src/devices/oprom/x86emu/x86emui.h @@ -75,7 +75,7 @@ #include <xf86_ansic.h> #else #include <string.h> -#endif +#endif /*--------------------------- Inline Functions ----------------------------*/ #ifdef __cplusplus diff --git a/src/devices/oprom/yabel/biosemu.c b/src/devices/oprom/yabel/biosemu.c index 294d81f279..9cdd0f279b 100644 --- a/src/devices/oprom/yabel/biosemu.c +++ b/src/devices/oprom/yabel/biosemu.c @@ -250,7 +250,7 @@ biosemu(u8 *biosmem, u32 biosmem_size, struct device * dev, unsigned long rom_ad X86EMU_setupMemFuncs(&my_mem_funcs); //setup PMM struct in BIOS_DATA_SEGMENT, offset 0x0 - u8 pmm_length = pmm_setup(BIOS_DATA_SEGMENT, 0x0); + u8 pmm_length = pmm_setup(BIOS_DATA_SEGMENT, 0x0); if (pmm_length <= 0) { printf ("\nYABEL: Warning: PMM Area could not be setup. PMM not available (%x)\n", pmm_length); diff --git a/src/devices/oprom/yabel/biosemu.h b/src/devices/oprom/yabel/biosemu.h index 09ace729ec..39cc0a9b0e 100644 --- a/src/devices/oprom/yabel/biosemu.h +++ b/src/devices/oprom/yabel/biosemu.h @@ -38,7 +38,7 @@ // Address, there will only be a call to this INT and a RETF #define PNP_INT_NUM 0xFD -/* array of funtion pointers to override generic interrupt handlers +/* array of funtion pointers to override generic interrupt handlers * a YABEL caller can add functions to this array before calling YABEL * if a interrupt occurs, YABEL checks wether a function is set in * this array and only runs the generic interrupt handler code, if diff --git a/src/devices/oprom/yabel/compat/functions.c b/src/devices/oprom/yabel/compat/functions.c index 035c8bc86e..c9ef0b7d77 100644 --- a/src/devices/oprom/yabel/compat/functions.c +++ b/src/devices/oprom/yabel/compat/functions.c @@ -61,6 +61,6 @@ u64 get_time(void) "rdtsc" : "=a"(eax), "=d"(edx) : /* no inputs, no clobber */); - act = ((u64) edx << 32) | eax; + act = ((u64) edx << 32) | eax; return act; } diff --git a/src/devices/oprom/yabel/compat/of.h b/src/devices/oprom/yabel/compat/of.h index 907139951f..6a00f7a316 100644 --- a/src/devices/oprom/yabel/compat/of.h +++ b/src/devices/oprom/yabel/compat/of.h @@ -19,7 +19,7 @@ #define phandle_t p32 #define ihandle_t p32 -typedef struct +typedef struct { unsigned int serv; int nargs; diff --git a/src/devices/oprom/yabel/compat/time.h b/src/devices/oprom/yabel/compat/time.h index 6f7099bd86..18dba3aa85 100644 --- a/src/devices/oprom/yabel/compat/time.h +++ b/src/devices/oprom/yabel/compat/time.h @@ -15,4 +15,4 @@ /* TODO: check how this works in x86 */ extern unsigned long tb_freq; u64 get_time(void); -#endif +#endif diff --git a/src/devices/oprom/yabel/debug.h b/src/devices/oprom/yabel/debug.h index d02930809d..fea1fb7a3b 100644 --- a/src/devices/oprom/yabel/debug.h +++ b/src/devices/oprom/yabel/debug.h @@ -39,7 +39,7 @@ static inline void set_ci(void) {}; * |||-Currently unused * ||||-Currently unused * |||||-Currently unused - * ||||||-DEBUG_PNP - Print Plug And Play access made by option rom + * ||||||-DEBUG_PNP - Print Plug And Play access made by option rom * |||||||-DEBUG_DISK - Print Disk I/O related messages, currently unused * ||||||||-DEBUG_PMM - Print messages related to POST Memory Manager (PMM) * |||||||||-DEBUG_VBE - Print messages related to VESA BIOS Extension (VBE) functions @@ -47,7 +47,7 @@ static inline void set_ci(void) {}; * |||||||||||-DEBUG_INTR - Print messages related to interrupt handling * ||||||||||||-DEBUG_CHECK_VMEM_ACCESS - Print messages related to accesse to certain areas of the virtual Memory (e.g. BDA (BIOS Data Area) or Interrupt Vectors) * |||||||||||||-DEBUG_MEM - Print memory access made by option rom (NOTE: this also includes accesses to fetch instructions) - * ||||||||||||||-DEBUG_IO - Print I/O access made by option rom + * ||||||||||||||-DEBUG_IO - Print I/O access made by option rom * 11000111111111 - Max Binary Value, Debug All (WARNING: - This could run for hours) */ diff --git a/src/devices/oprom/yabel/interrupt.c b/src/devices/oprom/yabel/interrupt.c index 9a796005bb..af79379f67 100644 --- a/src/devices/oprom/yabel/interrupt.c +++ b/src/devices/oprom/yabel/interrupt.c @@ -410,7 +410,7 @@ handleInt1a(void) M.x86.R_CL = #ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL pci_read_config8(dev, offs); -#else +#else (u8) rtas_pci_config_read(bios_device. puid, 1, bus, devfn, @@ -425,7 +425,7 @@ handleInt1a(void) M.x86.R_CX = #ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL pci_read_config16(dev, offs); -#else +#else (u16) rtas_pci_config_read(bios_device. puid, 2, bus, devfn, @@ -440,7 +440,7 @@ handleInt1a(void) M.x86.R_ECX = #ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL pci_read_config32(dev, offs); -#else +#else (u32) rtas_pci_config_read(bios_device. puid, 4, bus, devfn, @@ -478,7 +478,7 @@ handleInt1a(void) case 0xb10b: #ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL pci_write_config8(bios_device.dev, offs, M.x86.R_CL); -#else +#else rtas_pci_config_write(bios_device.puid, 1, bus, devfn, offs, M.x86.R_CL); #endif @@ -490,7 +490,7 @@ handleInt1a(void) case 0xb10c: #ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL pci_write_config16(bios_device.dev, offs, M.x86.R_CX); -#else +#else rtas_pci_config_write(bios_device.puid, 2, bus, devfn, offs, M.x86.R_CX); #endif @@ -502,7 +502,7 @@ handleInt1a(void) case 0xb10d: #ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL pci_write_config32(bios_device.dev, offs, M.x86.R_ECX); -#else +#else rtas_pci_config_write(bios_device.puid, 4, bus, devfn, offs, M.x86.R_ECX); #endif @@ -576,7 +576,7 @@ handleInterrupt(int intNum) int_handled = 1; break; case PMM_INT_NUM: - /* the selfdefined PMM INT number, this is called by the code in PMM struct, it + /* the selfdefined PMM INT number, this is called by the code in PMM struct, it * is handled by pmm_handleInt() */ pmm_handleInt(); diff --git a/src/devices/oprom/yabel/pmm.c b/src/devices/oprom/yabel/pmm.c index ad4dc6834c..989bde4d27 100644 --- a/src/devices/oprom/yabel/pmm.c +++ b/src/devices/oprom/yabel/pmm.c @@ -19,8 +19,8 @@ #include "device.h" /* this struct is used to remember which PMM spaces - * have been assigned. MAX_PMM_AREAS defines how many - * PMM areas we can assign. + * have been assigned. MAX_PMM_AREAS defines how many + * PMM areas we can assign. * All areas are assigned in PMM_CONV_SEGMENT */ typedef struct { @@ -37,7 +37,7 @@ static pmm_allocation_t pmm_allocation_array[MAX_PMM_AREAS]; /* index into pmm_allocation_array */ static u32 curr_pmm_allocation_index = 0; -/* This function is used to setup the PMM struct in virtual memory +/* This function is used to setup the PMM struct in virtual memory * at a certain offset, the length of the PMM struct is returned */ u8 pmm_setup(u16 segment, u16 offset) { @@ -79,7 +79,7 @@ u8 pmm_setup(u16 segment, u16 offset) return sizeof(pmm_information_t); } -/* handle the selfdefined interrupt, this is executed, when the PMM Entry Point +/* handle the selfdefined interrupt, this is executed, when the PMM Entry Point * is executed, it must handle all PMM requests */ void pmm_handleInt() @@ -136,7 +136,7 @@ void pmm_handleInt() __func__, next_offset); if (length == 0) { /* largest possible block size requested, we have on segment - * to allocate, so largest possible is segment size (0xFFFF) + * to allocate, so largest possible is segment size (0xFFFF) * minus next_offset */ rval = 0xFFFF - next_offset; @@ -151,7 +151,7 @@ void pmm_handleInt() } align = 1 << lsb; } - /* always align at least to paragraph (16byte) boundary + /* always align at least to paragraph (16byte) boundary * hm... since the length is always in paragraphs, we cannot * align outside of paragraphs anyway... so this check might * be unnecessary...*/ diff --git a/src/devices/oprom/yabel/pmm.h b/src/devices/oprom/yabel/pmm.h index 95645dffdc..3cc3c17ac6 100644 --- a/src/devices/oprom/yabel/pmm.h +++ b/src/devices/oprom/yabel/pmm.h @@ -34,7 +34,7 @@ typedef struct { u8 code[3]; } __attribute__ ((__packed__)) pmm_information_t; -/* This function is used to setup the PMM struct in virtual memory +/* This function is used to setup the PMM struct in virtual memory * at a certain offset */ u8 pmm_setup(u16 segment, u16 offset); diff --git a/src/devices/oprom/yabel/vbe.c b/src/devices/oprom/yabel/vbe.c index d80a97acc6..6ddeba613b 100644 --- a/src/devices/oprom/yabel/vbe.c +++ b/src/devices/oprom/yabel/vbe.c @@ -796,7 +796,7 @@ void vbe_set_graphics(void) mode_info.video_mode = (1 << 14) | CONFIG_FRAMEBUFFER_VESA_MODE; vbe_get_mode_info(&mode_info); - unsigned char *framebuffer = + unsigned char *framebuffer = (unsigned char *) le32_to_cpu(mode_info.vesa.phys_base_ptr); DEBUG_PRINTF_VBE("FRAMEBUFFER: 0x%08x\n", framebuffer); vbe_set_mode(&mode_info); @@ -807,9 +807,9 @@ void vbe_set_graphics(void) /* Switching Intel IGD to 1MB video memory will break this. Who * cares. */ // int imagesize = 1024*768*2; - + unsigned char *jpeg = cbfs_find_file("bootsplash.jpg", CBFS_TYPE_BOOTSPLASH); - if (!jpeg) { + if (!jpeg) { DEBUG_PRINTF_VBE("Could not find bootsplash.jpg\n"); return; } diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c index b85ee53a72..8863c237a4 100644 --- a/src/devices/pci_device.c +++ b/src/devices/pci_device.c @@ -1187,7 +1187,7 @@ unsigned int pci_domain_scan_bus(device_t dev, unsigned int max) #if CONFIG_PC80_SYSTEM == 1 /** - * + * * @brief Assign IRQ numbers * * This function assigns IRQs for all functions contained within the indicated @@ -1199,8 +1199,8 @@ unsigned int pci_domain_scan_bus(device_t dev, unsigned int max) * @param bus * @param slot * @param pIntAtoD is an array of IRQ #s that are assigned to PINTA through - * PINTD of this slot. The particular irq #s that are passed in - * depend on the routing inside your southbridge and on your + * PINTD of this slot. The particular irq #s that are passed in + * depend on the routing inside your southbridge and on your * motherboard. */ void pci_assign_irqs(unsigned bus, unsigned slot, @@ -1229,7 +1229,7 @@ void pci_assign_irqs(unsigned bus, unsigned slot, printk(BIOS_DEBUG, "Assigning IRQ %d to %d:%x.%d\n", irq, bus, slot, funct); - pci_write_config8(pdev, PCI_INTERRUPT_LINE, + pci_write_config8(pdev, PCI_INTERRUPT_LINE, pIntAtoD[line - 1]); #ifdef PARANOID_IRQ_ASSIGNMENTS diff --git a/src/devices/pci_rom.c b/src/devices/pci_rom.c index 0ed347b4e7..f13d9b6768 100644 --- a/src/devices/pci_rom.c +++ b/src/devices/pci_rom.c @@ -87,7 +87,7 @@ struct rom_header * pci_rom_probe(struct device *dev) rom_data->class_hi, rom_data->class_lo, rom_data->type); if (dev->class != ((rom_data->class_hi << 8) | rom_data->class_lo)) { - printk(BIOS_DEBUG, "Class Code mismatch ROM %08x, dev %08x\n", + printk(BIOS_DEBUG, "Class Code mismatch ROM %08x, dev %08x\n", (rom_data->class_hi << 8) | rom_data->class_lo, dev->class); //return NULL; diff --git a/src/devices/pciexp_device.c b/src/devices/pciexp_device.c index a14f00426f..790029ef1e 100644 --- a/src/devices/pciexp_device.c +++ b/src/devices/pciexp_device.c @@ -46,8 +46,8 @@ static void pciexp_tune_dev(device_t dev) #endif } -unsigned int pciexp_scan_bus(struct bus *bus, - unsigned min_devfn, unsigned max_devfn, +unsigned int pciexp_scan_bus(struct bus *bus, + unsigned min_devfn, unsigned max_devfn, unsigned int max) { device_t child; diff --git a/src/devices/pcix_device.c b/src/devices/pcix_device.c index e6147c9ba8..d3af53eed0 100644 --- a/src/devices/pcix_device.c +++ b/src/devices/pcix_device.c @@ -86,12 +86,12 @@ const char *pcix_speed(unsigned sstatus) static const char pcix_266mhz[] = "266MHz PCI-X"; static const char pcix_533mhz[] = "533MHZ PCI-X"; static const char unknown[] = "Unknown"; - + const char *result; result = unknown; switch(PCI_X_SSTATUS_MFREQ(sstatus)) { - case PCI_X_SSTATUS_CONVENTIONAL_PCI: - result = conventional; + case PCI_X_SSTATUS_CONVENTIONAL_PCI: + result = conventional; break; case PCI_X_SSTATUS_MODE1_66MHZ: result = pcix_66mhz; @@ -99,17 +99,17 @@ const char *pcix_speed(unsigned sstatus) case PCI_X_SSTATUS_MODE1_100MHZ: result = pcix_100mhz; break; - + case PCI_X_SSTATUS_MODE1_133MHZ: result = pcix_133mhz; break; - + case PCI_X_SSTATUS_MODE2_266MHZ_REF_66MHZ: case PCI_X_SSTATUS_MODE2_266MHZ_REF_100MHZ: case PCI_X_SSTATUS_MODE2_266MHZ_REF_133MHZ: result = pcix_266mhz; break; - + case PCI_X_SSTATUS_MODE2_533MHZ_REF_66MHZ: case PCI_X_SSTATUS_MODE2_533MHZ_REF_100MHZ: case PCI_X_SSTATUS_MODE2_533MHZ_REF_133MHZ: diff --git a/src/devices/pnp_device.c b/src/devices/pnp_device.c index 721d1ce3dc..469487d1d2 100644 --- a/src/devices/pnp_device.c +++ b/src/devices/pnp_device.c @@ -172,11 +172,11 @@ static void pnp_get_ioresource(device_t dev, unsigned index, struct io_info *inf unsigned moving, gran, step; resource = new_resource(dev, index); - + /* Initilize the resource */ resource->limit = 0xffff; resource->flags |= IORESOURCE_IO; - + /* Get the resource size */ moving = info->mask; gran = 15; @@ -259,9 +259,9 @@ static void get_resources(device_t dev, struct pnp_info *info) resource->size = 1; resource->flags |= IORESOURCE_IRQ; } -} +} -void pnp_enable_devices(device_t base_dev, struct device_operations *ops, +void pnp_enable_devices(device_t base_dev, struct device_operations *ops, unsigned functions, struct pnp_info *info) { struct device_path path; @@ -270,7 +270,7 @@ void pnp_enable_devices(device_t base_dev, struct device_operations *ops, path.type = DEVICE_PATH_PNP; path.pnp.port = base_dev->path.pnp.port; - + /* Setup the ops and resources on the newly allocated devices */ for(i = 0; i < functions; i++) { /* Skip logical devices this Super I/O doesn't have. */ @@ -279,9 +279,9 @@ void pnp_enable_devices(device_t base_dev, struct device_operations *ops, path.pnp.device = info[i].function; dev = alloc_find_dev(base_dev->bus, &path); - + /* Don't initialize a device multiple times */ - if (dev->ops) + if (dev->ops) continue; if (info[i].ops == 0) { diff --git a/src/devices/root_device.c b/src/devices/root_device.c index 3e3249e85e..b9369bcd1d 100644 --- a/src/devices/root_device.c +++ b/src/devices/root_device.c @@ -27,7 +27,7 @@ #include <device/pci.h> #include <reset.h> -/** +/** * Read the resources for the root device, * that encompass the resources for the entire system. * @param root Pointer to the device structure for the system root device @@ -54,9 +54,9 @@ void root_dev_set_resources(device_t root) * * The enumeration of certain buses is purely static. The existence of * devices on those buses can be completely determined at compile time - * and is specified in the config file. Typical examples are the 'PNP' - * devices on a legacy ISA/LPC bus. There is no need of probing of any kind, - * the only thing we have to do is to walk through the bus and + * and is specified in the config file. Typical examples are the 'PNP' + * devices on a legacy ISA/LPC bus. There is no need of probing of any kind, + * the only thing we have to do is to walk through the bus and * enable or disable devices as indicated in the config file. * * On the other hand, some devices are virtual and their existence is @@ -93,7 +93,7 @@ unsigned int scan_static_bus(device_t bus, unsigned int max) child->ops->enable(child); } if (child->path.type == DEVICE_PATH_I2C) { - printk(BIOS_DEBUG, "smbus: %s[%d]->", + printk(BIOS_DEBUG, "smbus: %s[%d]->", dev_path(child->bus->dev), child->bus->link ); } printk(BIOS_DEBUG, "%s %s\n", |