summaryrefslogtreecommitdiff
path: root/src/drivers/pc80/keyboard.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/drivers/pc80/keyboard.c')
-rw-r--r--src/drivers/pc80/keyboard.c101
1 files changed, 78 insertions, 23 deletions
diff --git a/src/drivers/pc80/keyboard.c b/src/drivers/pc80/keyboard.c
index 3e61a51cab..56b1fce93b 100644
--- a/src/drivers/pc80/keyboard.c
+++ b/src/drivers/pc80/keyboard.c
@@ -1,6 +1,7 @@
/*
* This file is part of the coreboot project.
*
+ * Copyright (C) 2015 Raptor Engineering
* Copyright (C) 2009 coresystems GmbH
* Copyright (C) 2008 Advanced Micro Devices, Inc.
* Copyright (C) 2003 Ollie Lo <ollielo@hotmail.com>
@@ -32,6 +33,8 @@
// Keyboard Controller Commands
#define KBC_CMD_READ_COMMAND 0x20 // Read command byte
#define KBC_CMD_WRITE_COMMAND 0x60 // Write command byte
+#define KBC_CMD_AUX_ENABLE 0xA8 // Auxiliary Interface enable
+#define KBC_CMD_AUX_TEST 0xA9 // Auxiliary Interface test
#define KBC_CMD_SELF_TEST 0xAA // Controller self-test
#define KBC_CMD_KBD_TEST 0xAB // Keyboard Interface test
@@ -106,9 +109,14 @@ static int kbc_cleanup_buffers(void)
return !!timeout;
}
-static enum cb_err kbc_self_test(void)
+static enum cb_err kbc_self_test(uint8_t probe_aux, uint8_t *aux_probe_result)
{
- u8 self_test;
+ uint8_t self_test;
+ uint8_t byte;
+
+ /* Set initial aux probe output value */
+ if (aux_probe_result)
+ *aux_probe_result = 0;
/* Clean up any junk that might have been in the KBC.
* Both input and output buffers must be empty.
@@ -154,6 +162,48 @@ static enum cb_err kbc_self_test(void)
return CB_KBD_INTERFACE_FAILURE;
}
+ if (probe_aux) {
+ /* aux interface detect */
+ outb(KBC_CMD_AUX_ENABLE, KBD_COMMAND);
+ if (!kbc_input_buffer_empty()) {
+ printk(BIOS_ERR, "Timeout waiting for controller during aux enable.\n");
+ return CB_KBD_CONTROLLER_FAILURE;
+ }
+ outb(KBC_CMD_READ_COMMAND, KBD_COMMAND);
+ if (!kbc_output_buffer_full()) {
+ printk(BIOS_ERR, "Timeout waiting for controller during aux probe.\n");
+ return CB_KBD_CONTROLLER_FAILURE;
+ }
+
+ byte = inb(KBD_DATA);
+ if (!(byte & (0x1 << 5))) {
+ printk(BIOS_DEBUG, "PS/2 auxiliary channel detected...\n");
+
+ /* auxiliary interface test */
+ outb(KBC_CMD_AUX_TEST, KBD_COMMAND);
+
+ if (!kbc_output_buffer_full()) {
+ printk(BIOS_ERR, "Auxiliary channel probe timed out.\n");
+ goto aux_failure;
+ }
+
+ /* read test result, 0x00 should be returned in case of no failures */
+ self_test = inb(KBD_DATA);
+
+ if (self_test != 0x00) {
+ printk(BIOS_ERR, "No device detected on auxiliary channel: 0x%x\n",
+ self_test);
+ goto aux_failure;
+ }
+
+ printk(BIOS_DEBUG, "PS/2 device detected on auxiliary channel\n");
+ if (aux_probe_result)
+ *aux_probe_result = 1;
+ }
+ }
+
+aux_failure:
+
return CB_SUCCESS;
}
@@ -187,53 +237,54 @@ static u8 send_keyboard(u8 command)
return regval;
}
-void pc_keyboard_init(void)
+uint8_t pc_keyboard_init(uint8_t probe_aux)
{
u8 retries;
u8 regval;
enum cb_err err;
+ uint8_t aux_dev_detected;
if (!CONFIG_DRIVERS_PS2_KEYBOARD)
- return;
+ return 0;
if (acpi_is_wakeup_s3())
- return;
+ return 0;
printk(BIOS_DEBUG, "Keyboard init...\n");
/* Run a keyboard controller self-test */
- err = kbc_self_test();
+ err = kbc_self_test(probe_aux, &aux_dev_detected);
/* Ignore iterface failure as it's non-fatal. */
if (err != CB_SUCCESS && err != CB_KBD_INTERFACE_FAILURE)
- return;
+ return 0;
/* Enable keyboard interface - No IRQ */
if (!kbc_input_buffer_empty())
- return;
+ return 0;
outb(0x60, KBD_COMMAND);
if (!kbc_input_buffer_empty())
- return;
+ return 0;
outb(0x20, KBD_DATA); /* send cmd: enable keyboard */
if (!kbc_input_buffer_empty()) {
printk(BIOS_INFO, "Timeout while enabling keyboard\n");
- return;
+ return 0;
}
/* clean up any junk that might have been in the keyboard */
if (!kbc_cleanup_buffers())
- return;
+ return 0;
/* reset keyboard and self test (keyboard side) */
regval = send_keyboard(0xFF);
if (regval == KBD_REPLY_RESEND) {
/* keeps sending RESENDs, probably no keyboard. */
printk(BIOS_INFO, "No PS/2 keyboard detected.\n");
- return;
+ return 0;
}
if (regval != KBD_REPLY_ACK) {
printk(BIOS_ERR, "Keyboard reset failed ACK: 0x%x\n", regval);
- return;
+ return 0;
}
/* the reset command takes some time, so wait a little longer */
@@ -241,14 +292,14 @@ void pc_keyboard_init(void)
if (!kbc_output_buffer_full()) {
printk(BIOS_ERR, "Timeout waiting for keyboard after reset.\n");
- return;
+ return 0;
}
regval = inb(KBD_DATA);
if (regval != 0xAA) {
printk(BIOS_ERR, "Keyboard reset selftest failed: 0x%x\n",
regval);
- return;
+ return 0;
}
/*
@@ -260,7 +311,7 @@ void pc_keyboard_init(void)
regval = send_keyboard(0xF5);
if (regval != KBD_REPLY_ACK) {
printk(BIOS_ERR, "Keyboard disable failed ACK: 0x%x\n", regval);
- return;
+ return 0;
}
/* Set scancode command */
@@ -268,34 +319,38 @@ void pc_keyboard_init(void)
if (regval != KBD_REPLY_ACK) {
printk(BIOS_ERR, "Keyboard set scancode cmd failed ACK: 0x%x\n",
regval);
- return;
+ return 0;
}
/* Set scancode mode 2 */
regval = send_keyboard(0x02);
if (regval != KBD_REPLY_ACK) {
printk(BIOS_ERR,
"Keyboard set scancode mode failed ACK: 0x%x\n", regval);
- return;
+ return 0;
}
/* All is well - enable keyboard interface */
if (!kbc_input_buffer_empty())
- return;
+ return 0;
outb(0x60, KBD_COMMAND);
if (!kbc_input_buffer_empty())
- return;
+ return 0;
outb(0x65, KBD_DATA); /* send cmd: enable keyboard and IRQ 1 */
if (!kbc_input_buffer_empty()) {
printk(BIOS_ERR, "Timeout during keyboard enable\n");
- return;
+ return 0;
}
/* enable the keyboard */
regval = send_keyboard(0xF4);
if (regval != KBD_REPLY_ACK) {
printk(BIOS_ERR, "Keyboard enable failed ACK: 0x%x\n", regval);
- return;
+ return 0;
}
+
+ printk(BIOS_DEBUG, "PS/2 keyboard initialized on primary channel\n");
+
+ return aux_dev_detected;
}
/*
@@ -308,7 +363,7 @@ void set_kbc_ps2_mode(void)
enum cb_err err;
/* Run a keyboard controller self-test */
- err = kbc_self_test();
+ err = kbc_self_test(0, NULL);
/* Ignore iterface failure as it's non-fatal. */
if (err != CB_SUCCESS && err != CB_KBD_INTERFACE_FAILURE)
return;
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 00:21:06 +0000