summaryrefslogtreecommitdiff
path: root/src/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'src/drivers/usb')
-rw-r--r--src/drivers/usb/Makefile.inc3
-rw-r--r--src/drivers/usb/ehci.h200
-rw-r--r--src/drivers/usb/ehci_debug.c1044
-rw-r--r--src/drivers/usb/usb_ch9.h102
4 files changed, 1349 insertions, 0 deletions
diff --git a/src/drivers/usb/Makefile.inc b/src/drivers/usb/Makefile.inc
new file mode 100644
index 0000000000..43931a9c09
--- /dev/null
+++ b/src/drivers/usb/Makefile.inc
@@ -0,0 +1,3 @@
+romstage-$(CONFIG_USBDEBUG_IN_ROMSTAGE) += ehci_debug.c
+
+ramstage-$(CONFIG_USBDEBUG) += ehci_debug.c
diff --git a/src/drivers/usb/ehci.h b/src/drivers/usb/ehci.h
new file mode 100644
index 0000000000..f9203522a5
--- /dev/null
+++ b/src/drivers/usb/ehci.h
@@ -0,0 +1,200 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * It was taken from the Linux kernel (include/linux/usb/ehci_def.h).
+ *
+ * Copyright (C) 2001-2002 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef EHCI_H
+#define EHCI_H
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+ /* these fields are specified as 8 and 16 bit registers,
+ * but some hosts can't perform 8 or 16 bit PCI accesses.
+ */
+ u32 hc_capbase;
+#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
+#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
+ u32 hcs_params; /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
+#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
+#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
+#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
+
+ u32 hcc_params; /* HCCPARAMS - offset 0x8 */
+/* EHCI 1.1 addendum */
+#define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19))
+#define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18))
+#define HCC_LPM(p) ((p)&(1 << 17))
+#define HCC_HW_PREFETCH(p) ((p)&(1 << 16))
+
+#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
+#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
+ u8 portroute[8]; /* nibbles for routing - offset 0xC */
+} __attribute__ ((packed));
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+
+ /* USBCMD: offset 0x00 */
+ u32 command;
+
+/* EHCI 1.1 addendum */
+#define CMD_HIRD (0xf<<24) /* host initiated resume duration */
+#define CMD_PPCEE (1<<15) /* per port change event enable */
+#define CMD_FSP (1<<14) /* fully synchronized prefetch */
+#define CMD_ASPE (1<<13) /* async schedule prefetch enable */
+#define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK (1<<11) /* enable "park" on async qh */
+#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
+#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
+#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
+#define CMD_ASE (1<<5) /* async schedule enable */
+#define CMD_PSE (1<<4) /* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET (1<<1) /* reset HC not bus */
+#define CMD_RUN (1<<0) /* start/stop HC */
+
+ /* USBSTS: offset 0x04 */
+ u32 status;
+#define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */
+#define STS_ASS (1<<15) /* Async Schedule Status */
+#define STS_PSS (1<<14) /* Periodic Schedule Status */
+#define STS_RECL (1<<13) /* Reclamation */
+#define STS_HALT (1<<12) /* Not running (any reason) */
+/* some bits reserved */
+ /* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA (1<<5) /* Interrupted on async advance */
+#define STS_FATAL (1<<4) /* such as some PCI access errors */
+#define STS_FLR (1<<3) /* frame list rolled over */
+#define STS_PCD (1<<2) /* port change detect */
+#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
+#define STS_INT (1<<0) /* "normal" completion (short, ...) */
+
+ /* USBINTR: offset 0x08 */
+ u32 intr_enable;
+
+ /* FRINDEX: offset 0x0C */
+ u32 frame_index; /* current microframe number */
+ /* CTRLDSSEGMENT: offset 0x10 */
+ u32 segment; /* address bits 63:32 if needed */
+ /* PERIODICLISTBASE: offset 0x14 */
+ u32 frame_list; /* points to periodic list */
+ /* ASYNCLISTADDR: offset 0x18 */
+ u32 async_next; /* address of next async queue head */
+
+ u32 reserved[9];
+
+ /* CONFIGFLAG: offset 0x40 */
+ u32 configured_flag;
+#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
+
+ /* PORTSC: offset 0x44 */
+ u32 port_status[0]; /* up to N_PORTS */
+/* EHCI 1.1 addendum */
+#define PORTSC_SUSPEND_STS_ACK 0
+#define PORTSC_SUSPEND_STS_NYET 1
+#define PORTSC_SUSPEND_STS_STALL 2
+#define PORTSC_SUSPEND_STS_ERR 3
+
+#define PORT_DEV_ADDR (0x7f<<25) /* device address */
+#define PORT_SSTS (0x3<<23) /* suspend status */
+/* 31:23 reserved */
+#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
+#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
+#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_TEST_PKT (0x4<<16) /* Port Test Control - packet test */
+#define PORT_LED_OFF (0<<14)
+#define PORT_LED_AMBER (1<<14)
+#define PORT_LED_GREEN (2<<14)
+#define PORT_LED_MASK (3<<14)
+#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
+#define PORT_POWER (1<<12) /* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_LPM (1<<9) /* LPM transaction */
+#define PORT_RESET (1<<8) /* reset port */
+#define PORT_SUSPEND (1<<7) /* suspend port */
+#define PORT_RESUME (1<<6) /* resume it */
+#define PORT_OCC (1<<5) /* over current change */
+#define PORT_OC (1<<4) /* over current active */
+#define PORT_PEC (1<<3) /* port enable change */
+#define PORT_PE (1<<2) /* port enable */
+#define PORT_CSC (1<<1) /* connect status change */
+#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+} __attribute__ ((packed));
+
+#define USBMODE 0x68 /* USB Device mode */
+#define USBMODE_SDIS (1<<3) /* Stream disable */
+#define USBMODE_BE (1<<2) /* BE/LE endianness select */
+#define USBMODE_CM_HC (3<<0) /* host controller mode */
+#define USBMODE_CM_IDLE (0<<0) /* idle state */
+
+/* Moorestown has some non-standard registers, partially due to the fact that
+ * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
+ * PORTSCx
+ */
+#define HOSTPC0 0x84 /* HOSTPC extension */
+#define HOSTPC_PHCD (1<<22) /* Phy clock disable */
+#define HOSTPC_PSPD (3<<25) /* Port speed detection */
+#define USBMODE_EX 0xc8 /* USB Device mode extension */
+#define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */
+#define USBMODE_EX_HC (3<<0) /* host controller mode */
+#define TXFILLTUNING 0x24 /* TX FIFO Tuning register */
+#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console. (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+ u32 control;
+#define DBGP_OWNER (1<<30)
+#define DBGP_ENABLED (1<<28)
+#define DBGP_DONE (1<<16)
+#define DBGP_INUSE (1<<10)
+#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
+# define DBGP_ERR_BAD 1
+# define DBGP_ERR_SIGNAL 2
+#define DBGP_ERROR (1<<6)
+#define DBGP_GO (1<<5)
+#define DBGP_OUT (1<<4)
+#define DBGP_LEN(x) (((x)>>0)&0x0f)
+ u32 pids;
+#define DBGP_PID_GET(x) (((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
+ u32 data03;
+ u32 data47;
+ u32 address;
+#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
+} __attribute__ ((packed));
+#endif
diff --git a/src/drivers/usb/ehci_debug.c b/src/drivers/usb/ehci_debug.c
new file mode 100644
index 0000000000..94625c0e1a
--- /dev/null
+++ b/src/drivers/usb/ehci_debug.c
@@ -0,0 +1,1044 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2006 Eric Biederman (ebiederm@xmission.com)
+ * Copyright (C) 2007 AMD
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
+#include <stddef.h>
+#include <console/console.h>
+#include <console/usb.h>
+#include <device/pci_ehci.h>
+#include <arch/io.h>
+#include <device/pci.h>
+#include <device/pci_def.h>
+#include <arch/byteorder.h>
+#include <arch/early_variables.h>
+#include <string.h>
+#include <cbmem.h>
+
+#include "usb_ch9.h"
+#include "ehci.h"
+
+
+#define DBGP_EP_VALID (1<<0)
+#define DBGP_EP_ENABLED (1<<1)
+#define DBGP_EP_BUSY (1<<2)
+#define DBGP_EP_STATMASK (DBGP_EP_VALID | DBGP_EP_ENABLED)
+
+struct dbgp_pipe
+{
+ u8 devnum;
+ u8 endpoint;
+ u8 pid;
+ u8 status;
+ int timeout;
+
+ u8 bufidx;
+ char buf[8];
+};
+
+#define DBGP_MAX_ENDPOINTS 4
+#define DBGP_SETUP_EP0 0 /* Compulsory endpoint 0. */
+#define DBGP_CONSOLE_EPOUT 1
+#define DBGP_CONSOLE_EPIN 2
+
+struct ehci_debug_info {
+ void *ehci_caps;
+ void *ehci_regs;
+ void *ehci_debug;
+
+ struct dbgp_pipe ep_pipe[DBGP_MAX_ENDPOINTS];
+};
+
+#if CONFIG_DEBUG_USBDEBUG
+static void dbgp_print_data(struct ehci_dbg_port *ehci_debug);
+static int dbgp_enabled(void);
+# define dprintk(LEVEL, args...) \
+ do { if (!dbgp_enabled()) printk(LEVEL, ##args); } while (0)
+#else
+# define dbgp_print_data(x) do {} while(0)
+# define dprintk(LEVEL, args...) do {} while(0)
+#endif
+
+#define USB_DEBUG_DEVNUM 127
+
+#define DBGP_LEN_UPDATE(x, len) (((x) & ~0x0f) | ((len) & 0x0f))
+/*
+ * USB Packet IDs (PIDs)
+ */
+
+/* token */
+#define USB_PID_OUT 0xe1
+#define USB_PID_IN 0x69
+#define USB_PID_SOF 0xa5
+#define USB_PID_SETUP 0x2d
+/* handshake */
+#define USB_PID_ACK 0xd2
+#define USB_PID_NAK 0x5a
+#define USB_PID_STALL 0x1e
+#define USB_PID_NYET 0x96
+/* data */
+#define USB_PID_DATA0 0xc3
+#define USB_PID_DATA1 0x4b
+#define USB_PID_DATA2 0x87
+#define USB_PID_MDATA 0x0f
+/* Special */
+#define USB_PID_PREAMBLE 0x3c
+#define USB_PID_ERR 0x3c
+#define USB_PID_SPLIT 0x78
+#define USB_PID_PING 0xb4
+#define USB_PID_UNDEF_0 0xf0
+
+#define USB_PID_DATA_TOGGLE 0x88
+#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE)
+
+#define PCI_CAP_ID_EHCI_DEBUG 0xa
+
+#define HUB_ROOT_RESET_TIME 50 /* times are in msec */
+#define HUB_SHORT_RESET_TIME 10
+#define HUB_LONG_RESET_TIME 200
+#define HUB_RESET_TIMEOUT 500
+
+#define DBGP_MICROFRAME_TIMEOUT_LOOPS 1000
+#define DBGP_MICROFRAME_RETRIES 10
+#define DBGP_MAX_PACKET 8
+
+static struct ehci_debug_info glob_dbg_info CAR_GLOBAL;
+#if !defined(__PRE_RAM__) && !defined(__SMM__)
+static struct device_operations *ehci_drv_ops;
+static struct device_operations ehci_dbg_ops;
+#endif
+
+static inline struct ehci_debug_info *dbgp_ehci_info(void)
+{
+ return car_get_var_ptr(&glob_dbg_info);
+}
+
+static int dbgp_wait_until_complete(struct ehci_dbg_port *ehci_debug)
+{
+ u32 ctrl;
+ int loop = 0;
+
+ do {
+ ctrl = read32((unsigned long)&ehci_debug->control);
+ /* Stop when the transaction is finished */
+ if (ctrl & DBGP_DONE)
+ break;
+ } while (++loop < DBGP_MICROFRAME_TIMEOUT_LOOPS);
+
+ if (! (ctrl & DBGP_DONE)) {
+ dprintk(BIOS_ERR, "dbgp_wait_until_complete: retry timeout.\n");
+ return -DBGP_ERR_SIGNAL;
+ }
+
+ /* Now that we have observed the completed transaction,
+ * clear the done bit.
+ */
+ write32((unsigned long)&ehci_debug->control, ctrl | DBGP_DONE);
+ return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
+}
+
+static void dbgp_breath(void)
+{
+ /* Sleep to give the debug port a chance to breathe */
+}
+
+static int dbgp_wait_until_done(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe,
+ unsigned ctrl, const int timeout)
+{
+ u32 rd_ctrl, rd_pids;
+ u32 ctrl_prev = 0, pids_prev = 0;
+ u8 lpid;
+ int ret, host_retries;
+ int loop;
+
+ loop = 0;
+device_retry:
+ host_retries = 0;
+ if (loop++ >= timeout)
+ return -DBGP_ERR_BAD;
+
+host_retry:
+ if (host_retries++ >= DBGP_MICROFRAME_RETRIES)
+ return -DBGP_ERR_BAD;
+ if (loop == 1 || host_retries > 1)
+ dprintk(BIOS_SPEW, "dbgp: start (@ %3d,%d) ctrl=%08x\n",
+ loop, host_retries, ctrl | DBGP_GO);
+ write32((unsigned long)&ehci_debug->control, ctrl | DBGP_GO);
+ ret = dbgp_wait_until_complete(ehci_debug);
+ rd_ctrl = read32((unsigned long)&ehci_debug->control);
+ rd_pids = read32((unsigned long)&ehci_debug->pids);
+
+ if (rd_ctrl != ctrl_prev || rd_pids != pids_prev || (ret<0)) {
+ ctrl_prev = rd_ctrl;
+ pids_prev = rd_pids;
+ dprintk(BIOS_SPEW, "dbgp: status (@ %3d,%d) ctrl=%08x pids=%08x ret=%d\n",
+ loop, host_retries, rd_ctrl, rd_pids, ret);
+ }
+
+ /* Controller hardware failure. */
+ if (ret == -DBGP_ERR_SIGNAL) {
+ return ret;
+
+ /* Bus failure (corrupted microframe). */
+ } else if (ret == -DBGP_ERR_BAD) {
+ goto host_retry;
+ }
+
+ lpid = DBGP_PID_GET(rd_pids);
+
+ /* If I get an ACK or in-sync DATA PID, we are done. */
+ if ((lpid == USB_PID_ACK) || (lpid == pipe->pid)) {
+ if (DBGP_LEN(rd_ctrl))
+ pipe->pid ^= USB_PID_DATA_TOGGLE;
+ }
+
+ /* If the port is getting full or it has dropped data
+ * start pacing ourselves, not necessary but it's friendly.
+ */
+ else if (lpid == USB_PID_NYET) {
+ dbgp_breath();
+ goto device_retry;
+ }
+
+ /* If I get a NACK or out-of-sync DATA PID, reissue the transmission. */
+ else if ((lpid == USB_PID_NAK) || (lpid == (pipe->pid ^ USB_PID_DATA_TOGGLE))) {
+ goto device_retry;
+ }
+
+ /* Abort on STALL handshake for endpoint 0.*/
+ else if ((lpid == USB_PID_STALL) && (pipe->endpoint == 0x0)) {
+ ret = -DBGP_ERR_BAD;
+ }
+
+ dbgp_print_data(ehci_debug);
+
+ return ret;
+}
+
+static void dbgp_set_data(struct ehci_dbg_port *ehci_debug, const void *buf, int size)
+{
+ const unsigned char *bytes = buf;
+ u32 lo, hi;
+ int i;
+
+ lo = hi = 0;
+ for (i = 0; i < 4 && i < size; i++)
+ lo |= bytes[i] << (8*i);
+ for (; i < 8 && i < size; i++)
+ hi |= bytes[i] << (8*(i - 4));
+ write32((unsigned long)&ehci_debug->data03, lo);
+ write32((unsigned long)&ehci_debug->data47, hi);
+}
+
+static void dbgp_get_data(struct ehci_dbg_port *ehci_debug, void *buf, int size)
+{
+ unsigned char *bytes = buf;
+ u32 lo, hi;
+ int i;
+
+ lo = read32((unsigned long)&ehci_debug->data03);
+ hi = read32((unsigned long)&ehci_debug->data47);
+ for (i = 0; i < 4 && i < size; i++)
+ bytes[i] = (lo >> (8*i)) & 0xff;
+ for (; i < 8 && i < size; i++)
+ bytes[i] = (hi >> (8*(i - 4))) & 0xff;
+}
+
+#if CONFIG_DEBUG_USBDEBUG
+static void dbgp_print_data(struct ehci_dbg_port *ehci_debug)
+{
+ u32 ctrl = read32((unsigned long)&ehci_debug->control);
+ u32 lo = read32((unsigned long)&ehci_debug->data03);
+ u32 hi = read32((unsigned long)&ehci_debug->data47);
+ int len = DBGP_LEN(ctrl);
+ if (len) {
+ int i;
+ dprintk(BIOS_SPEW, "dbgp: buf:");
+ for (i = 0; i < 4 && i < len; i++)
+ dprintk(BIOS_SPEW, " %02x", (lo >> (8*i)) & 0xff);
+ for (; i < 8 && i < len; i++)
+ dprintk(BIOS_SPEW, " %02x", (hi >> (8*(i - 4))) & 0xff);
+ dprintk(BIOS_SPEW, "\n");
+ }
+}
+#endif
+
+static int dbgp_bulk_write(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe,
+ const char *bytes, int size)
+{
+ u32 pids, addr, ctrl;
+ int ret;
+
+ if (size > DBGP_MAX_PACKET)
+ return -1;
+
+ addr = DBGP_EPADDR(pipe->devnum, pipe->endpoint);
+ pids = DBGP_PID_SET(pipe->pid, USB_PID_OUT);
+
+ ctrl = read32((unsigned long)&ehci_debug->control);
+ ctrl = DBGP_LEN_UPDATE(ctrl, size);
+ ctrl |= DBGP_OUT;
+
+ dbgp_set_data(ehci_debug, bytes, size);
+ write32((unsigned long)&ehci_debug->address, addr);
+ write32((unsigned long)&ehci_debug->pids, pids);
+
+ ret = dbgp_wait_until_done(ehci_debug, pipe, ctrl, pipe->timeout);
+
+ return ret;
+}
+
+int dbgp_bulk_write_x(struct dbgp_pipe *pipe, const char *bytes, int size)
+{
+ struct ehci_debug_info *dbg_info = dbgp_ehci_info();
+ return dbgp_bulk_write(dbg_info->ehci_debug, pipe, bytes, size);
+}
+
+static int dbgp_bulk_read(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe,
+ void *data, int size)
+{
+ u32 pids, addr, ctrl;
+ int ret;
+
+ if (size > DBGP_MAX_PACKET)
+ return -1;
+
+ addr = DBGP_EPADDR(pipe->devnum, pipe->endpoint);
+ pids = DBGP_PID_SET(pipe->pid, USB_PID_IN);
+
+ ctrl = read32((unsigned long)&ehci_debug->control);
+ ctrl = DBGP_LEN_UPDATE(ctrl, size);
+ ctrl &= ~DBGP_OUT;
+
+ write32((unsigned long)&ehci_debug->address, addr);
+ write32((unsigned long)&ehci_debug->pids, pids);
+ ret = dbgp_wait_until_done(ehci_debug, pipe, ctrl, pipe->timeout);
+ if (ret < 0)
+ return ret;
+
+ if (size > ret)
+ size = ret;
+ dbgp_get_data(ehci_debug, data, size);
+ return ret;
+}
+
+int dbgp_bulk_read_x(struct dbgp_pipe *pipe, void *data, int size)
+{
+ struct ehci_debug_info *dbg_info = dbgp_ehci_info();
+ return dbgp_bulk_read(dbg_info->ehci_debug, pipe, data, size);
+}
+
+static void dbgp_mdelay(int ms)
+{
+ int i;
+
+ while (ms--) {
+ for (i = 0; i < 1000; i++)
+ inb(0x80);
+ }
+}
+
+static int dbgp_control_msg(struct ehci_dbg_port *ehci_debug, unsigned devnum, int requesttype,
+ int request, int value, int index, void *data, int size)
+{
+ struct ehci_debug_info *info = dbgp_ehci_info();
+ struct dbgp_pipe *pipe = &info->ep_pipe[DBGP_SETUP_EP0];
+ u32 pids, addr, ctrl;
+ struct usb_ctrlrequest req;
+ int read;
+ int ret, ret2;
+
+ read = (requesttype & USB_DIR_IN) != 0;
+ if (size > DBGP_MAX_PACKET)
+ return -1;
+
+ /* Compute the control message */
+ req.bRequestType = requesttype;
+ req.bRequest = request;
+ req.wValue = cpu_to_le16(value);
+ req.wIndex = cpu_to_le16(index);
+ req.wLength = cpu_to_le16(size);
+
+ pipe->devnum = devnum;
+ pipe->endpoint = 0;
+ pipe->pid = USB_PID_DATA0;
+ pipe->timeout = 1000;
+ addr = DBGP_EPADDR(pipe->devnum, pipe->endpoint);
+ pids = DBGP_PID_SET(pipe->pid, USB_PID_SETUP);
+
+ ctrl = read32((unsigned long)&ehci_debug->control);
+ ctrl = DBGP_LEN_UPDATE(ctrl, sizeof(req));
+ ctrl |= DBGP_OUT;
+
+ /* Setup stage */
+ dbgp_set_data(ehci_debug, &req, sizeof(req));
+ write32((unsigned long)&ehci_debug->address, addr);
+ write32((unsigned long)&ehci_debug->pids, pids);
+ ret = dbgp_wait_until_done(ehci_debug, pipe, ctrl, 1);
+ if (ret < 0)
+ return ret;
+
+ /* Data stage (optional) */
+ if (read && size)
+ ret = dbgp_bulk_read(ehci_debug, pipe, data, size);
+ else if (!read && size)
+ ret = dbgp_bulk_write(ehci_debug, pipe, data, size);
+
+ /* Status stage in opposite direction */
+ pipe->pid = USB_PID_DATA1;
+ ctrl = read32((unsigned long)&ehci_debug->control);
+ ctrl = DBGP_LEN_UPDATE(ctrl, 0);
+ if (read) {
+ pids = DBGP_PID_SET(pipe->pid, USB_PID_OUT);
+ ctrl |= DBGP_OUT;
+ } else {
+ pids = DBGP_PID_SET(pipe->pid, USB_PID_IN);
+ ctrl &= ~DBGP_OUT;
+ }
+
+ write32((unsigned long)&ehci_debug->pids, pids);
+ ret2 = dbgp_wait_until_done(ehci_debug, pipe, ctrl, pipe->timeout);
+ if (ret2 < 0)
+ return ret2;
+
+ return ret;
+}
+
+static int ehci_reset_port(struct ehci_regs *ehci_regs, int port)
+{
+ u32 portsc;
+ u32 delay_time, delay_ms;
+ int loop;
+
+ /* Reset the usb debug port */
+ portsc = read32((unsigned long)&ehci_regs->port_status[port - 1]);
+ portsc &= ~PORT_PE;
+ portsc |= PORT_RESET;
+ write32((unsigned long)&ehci_regs->port_status[port - 1], portsc);
+
+ delay_ms = HUB_ROOT_RESET_TIME;
+ for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
+ delay_time += delay_ms) {
+ dbgp_mdelay(delay_ms);
+
+ portsc = read32((unsigned long)&ehci_regs->port_status[port - 1]);
+ if (portsc & PORT_RESET) {
+ /* force reset to complete */
+ loop = 2;
+ write32((unsigned long)&ehci_regs->port_status[port - 1],
+ portsc & ~(PORT_RWC_BITS | PORT_RESET));
+ do {
+ dbgp_mdelay(delay_ms);
+ portsc = read32((unsigned long)&ehci_regs->port_status[port - 1]);
+ delay_time += delay_ms;
+ } while ((portsc & PORT_RESET) && (--loop > 0));
+ if (!loop) {
+ printk(BIOS_DEBUG, "ehci_reset_port forced done");
+ }
+ }
+
+ /* Device went away? */
+ if (!(portsc & PORT_CONNECT))
+ return -1; //-ENOTCONN;
+
+ /* bomb out completely if something weird happened */
+ if ((portsc & PORT_CSC))
+ return -2; //-EINVAL;
+
+ /* If we've finished resetting, then break out of the loop */
+ if (!(portsc & PORT_RESET) && (portsc & PORT_PE))
+ return 0;
+ }
+ return -3; //-EBUSY;
+}
+
+static int ehci_wait_for_port(struct ehci_regs *ehci_regs, int port)
+{
+ u32 status;
+ int ret, reps;
+
+ for (reps = 0; reps < 3; reps++) {
+ dbgp_mdelay(100);
+ status = read32((unsigned long)&ehci_regs->status);
+ if (status & STS_PCD) {
+ ret = ehci_reset_port(ehci_regs, port);
+ if (ret == 0)
+ return 0;
+ }
+ }
+ return -1; //-ENOTCONN;
+}
+
+#define USB_HUB_PORT_CONNECTION 0
+#define USB_HUB_PORT_ENABLED 1
+#define USB_HUB_PORT_RESET 4
+#define USB_HUB_PORT_POWER 8
+#define USB_HUB_C_PORT_CONNECTION 16
+#define USB_HUB_C_PORT_RESET 20
+
+#if CONFIG_USBDEBUG_OPTIONAL_HUB_PORT
+
+static int hub_port_status(const char * buf, int feature)
+{
+ return !!(buf[feature>>3] & (1<<(feature&0x7)));
+}
+
+static int dbgp_hub_enable(struct ehci_dbg_port *ehci_debug, unsigned int port)
+{
+ const u8 hub_addr = USB_DEBUG_DEVNUM-1;
+ char status[8];
+ int ret, loop;
+
+ /* Move hub to address 126. */
+ ret = dbgp_control_msg(ehci_debug, 0,
+ USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_SET_ADDRESS, hub_addr, 0, NULL, 0);
+ if (ret < 0)
+ goto err;
+
+ /* Enter configured state on hub. */
+ ret = dbgp_control_msg(ehci_debug, hub_addr,
+ USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_SET_CONFIGURATION, 1, 0, NULL, 0);
+ if (ret < 0)
+ goto err;
+
+ /* Set PORT_POWER, poll for PORT_CONNECTION. */
+ ret = dbgp_control_msg(ehci_debug, hub_addr,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER,
+ USB_REQ_SET_FEATURE, USB_HUB_PORT_POWER, port, NULL, 0);
+ if (ret < 0)
+ goto err;
+
+ loop = 100;
+ do {
+ dbgp_mdelay(10);
+ ret = dbgp_control_msg(ehci_debug, hub_addr,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_OTHER,
+ USB_REQ_GET_STATUS, 0, port, status, 4);
+ if (ret < 0)
+ goto err;
+ if (hub_port_status(status, USB_HUB_PORT_CONNECTION))
+ break;
+ } while (--loop);
+ if (! loop)
+ goto err;
+
+ ret = dbgp_control_msg(ehci_debug, hub_addr,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER,
+ USB_REQ_CLEAR_FEATURE, USB_HUB_C_PORT_CONNECTION, port, NULL, 0);
+ if (ret < 0)
+ goto err;
+
+
+ /* Set PORT_RESET, poll for C_PORT_RESET. */
+ ret = dbgp_control_msg(ehci_debug, hub_addr,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER,
+ USB_REQ_SET_FEATURE, USB_HUB_PORT_RESET, port, NULL, 0);
+ if (ret < 0)
+ goto err;
+
+ loop = 100;
+ do {
+ dbgp_mdelay(10);
+ ret = dbgp_control_msg(ehci_debug, hub_addr,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_OTHER,
+ USB_REQ_GET_STATUS, 0, port, status, 4);
+ if (ret < 0)
+ goto err;
+ if (hub_port_status(status, USB_HUB_C_PORT_RESET))
+ break;
+ } while (--loop);
+ if (! loop)
+ goto err;
+
+ ret = dbgp_control_msg(ehci_debug, hub_addr,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER,
+ USB_REQ_CLEAR_FEATURE, USB_HUB_C_PORT_RESET, port, NULL, 0);
+ if (ret < 0)
+ goto err;
+
+ if (hub_port_status(status, USB_HUB_PORT_ENABLED))
+ return 0;
+err:
+ return -1;
+}
+#endif /* CONFIG_USBDEBUG_OPTIONAL_HUB_PORT */
+
+static void enable_usbdebug(void)
+{
+#if defined(__PRE_RAM__) || !CONFIG_USBDEBUG_IN_ROMSTAGE
+ pci_devfn_t dbg_dev = pci_ehci_dbg_dev(CONFIG_USBDEBUG_HCD_INDEX);
+ pci_ehci_dbg_enable(dbg_dev, CONFIG_EHCI_BAR);
+#endif
+}
+
+static void set_debug_port(unsigned int port)
+{
+ pci_devfn_t dbg_dev = pci_ehci_dbg_dev(CONFIG_USBDEBUG_HCD_INDEX);
+ pci_ehci_dbg_set_port(dbg_dev, port);
+}
+
+static int usbdebug_init_(unsigned ehci_bar, unsigned offset, struct ehci_debug_info *info)
+{
+ struct ehci_caps *ehci_caps;
+ struct ehci_regs *ehci_regs;
+ struct ehci_dbg_port *ehci_debug;
+
+ struct usb_debug_descriptor dbgp_desc;
+ u32 cmd, ctrl, status, portsc, hcs_params;
+ u32 debug_port, new_debug_port = 0, n_ports;
+ u32 devnum;
+ int ret, i, configured;
+ int loop;
+ int port_map_tried;
+ int playtimes = 3;
+
+ ehci_caps = (struct ehci_caps *)ehci_bar;
+ ehci_regs = (struct ehci_regs *)(ehci_bar +
+ HC_LENGTH(read32((unsigned long)&ehci_caps->hc_capbase)));
+ ehci_debug = (struct ehci_dbg_port *)(ehci_bar + offset);
+ info->ehci_debug = (void *)0;
+ memset(&info->ep_pipe, 0, sizeof (info->ep_pipe));
+
+ if (CONFIG_USBDEBUG_DEFAULT_PORT > 0)
+ set_debug_port(CONFIG_USBDEBUG_DEFAULT_PORT);
+ else
+ set_debug_port(1);
+
+try_next_time:
+ port_map_tried = 0;
+
+try_next_port:
+ hcs_params = read32((unsigned long)&ehci_caps->hcs_params);
+ debug_port = HCS_DEBUG_PORT(hcs_params);
+ n_ports = HCS_N_PORTS(hcs_params);
+
+ dprintk(BIOS_INFO, "ehci_bar: 0x%x\n", ehci_bar);
+ dprintk(BIOS_INFO, "debug_port: %d\n", debug_port);
+ dprintk(BIOS_INFO, "n_ports: %d\n", n_ports);
+
+ for (i = 1; i <= n_ports; i++) {
+ portsc = read32((unsigned long)&ehci_regs->port_status[i-1]);
+ dprintk(BIOS_INFO, "PORTSC #%d: %08x\n", i, portsc);
+ }
+
+ if(port_map_tried && (new_debug_port != debug_port)) {
+ if(--playtimes) {
+ set_debug_port(debug_port);
+ goto try_next_time;
+ }
+ return -1;
+ }
+
+ /* Wait until the controller is halted */
+ status = read32((unsigned long)&ehci_regs->status);
+ if (!(status & STS_HALT)) {
+ cmd = read32((unsigned long)&ehci_regs->command);
+ cmd &= ~CMD_RUN;
+ write32((unsigned long)&ehci_regs->command, cmd);
+ loop = 100;
+ do {
+ dbgp_mdelay(10);
+ status = read32((unsigned long)&ehci_regs->status);
+ } while (!(status & STS_HALT) && (--loop > 0));
+ if (status & STS_HALT)
+ dprintk(BIOS_INFO, "EHCI controller halted successfully.\n");
+ else
+ dprintk(BIOS_INFO, "EHCI controller is not halted. Reset may fail.\n");
+ }
+
+ loop = 100;
+ /* Reset the EHCI controller */
+ cmd = read32((unsigned long)&ehci_regs->command);
+ cmd |= CMD_RESET;
+ write32((unsigned long)&ehci_regs->command, cmd);
+ do {
+ dbgp_mdelay(10);
+ cmd = read32((unsigned long)&ehci_regs->command);
+ } while ((cmd & CMD_RESET) && (--loop > 0));
+
+ if(!loop) {
+ dprintk(BIOS_INFO, "Could not reset EHCI controller.\n");
+ // on some systems it works without succeeding here.
+ // return -2;
+ } else {
+ dprintk(BIOS_INFO, "EHCI controller reset successfully.\n");
+ }
+
+ /* Claim ownership, but do not enable yet */
+ ctrl = read32((unsigned long)&ehci_debug->control);
+ ctrl |= DBGP_OWNER;
+ ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
+ write32((unsigned long)&ehci_debug->control, ctrl);
+
+ /* Start EHCI controller */
+ cmd = read32((unsigned long)&ehci_regs->command);
+ cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
+ cmd |= CMD_RUN;
+ write32((unsigned long)&ehci_regs->command, cmd);
+
+ /* Ensure everything is routed to the EHCI */
+ write32((unsigned long)&ehci_regs->configured_flag, FLAG_CF);
+
+ /* Wait until the controller is no longer halted */
+ loop = 10;
+ do {
+ dbgp_mdelay(10);
+ status = read32((unsigned long)&ehci_regs->status);
+ } while ((status & STS_HALT) && (--loop > 0));
+
+ if(!loop) {
+ dprintk(BIOS_INFO, "EHCI could not be started.\n");
+ return -3;
+ }
+ dprintk(BIOS_INFO, "EHCI started.\n");
+
+ /* Wait for a device to show up in the debug port */
+ ret = ehci_wait_for_port(ehci_regs, debug_port);
+ if (ret < 0) {
+ dprintk(BIOS_INFO, "No device found in debug port %d\n", debug_port);
+ goto next_debug_port;
+ }
+ dprintk(BIOS_INFO, "EHCI done waiting for port.\n");
+
+ /* Enable the debug port */
+ ctrl = read32((unsigned long)&ehci_debug->control);
+ ctrl |= DBGP_CLAIM;
+ write32((unsigned long)&ehci_debug->control, ctrl);
+ ctrl = read32((unsigned long)&ehci_debug->control);
+ if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
+ dprintk(BIOS_INFO, "No device in EHCI debug port.\n");
+ write32((unsigned long)&ehci_debug->control, ctrl & ~DBGP_CLAIM);
+ ret = -4;
+ goto err;
+ }
+ dprintk(BIOS_INFO, "EHCI debug port enabled.\n");
+
+ /* Completely transfer the debug device to the debug controller */
+ portsc = read32((unsigned long)&ehci_regs->port_status[debug_port - 1]);
+ portsc &= ~PORT_PE;
+ write32((unsigned long)&ehci_regs->port_status[debug_port - 1], portsc);
+
+ dbgp_mdelay(100);
+
+#if CONFIG_USBDEBUG_OPTIONAL_HUB_PORT
+ ret = dbgp_hub_enable(ehci_debug, CONFIG_USBDEBUG_OPTIONAL_HUB_PORT);
+ if (ret < 0) {
+ dprintk(BIOS_INFO, "Could not enable USB hub on debug port.\n");
+ ret = -6;
+ goto err;
+ }
+#endif
+
+ /* Find the debug device and make it device number 127 */
+ devnum = 0;
+debug_dev_retry:
+ memset(&dbgp_desc, 0, sizeof(dbgp_desc));
+ ret = dbgp_control_msg(ehci_debug, devnum,
+ USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0,
+ &dbgp_desc, sizeof(dbgp_desc));
+ if (ret == sizeof(dbgp_desc)) {
+ if (dbgp_desc.bLength == sizeof(dbgp_desc) && dbgp_desc.bDescriptorType==USB_DT_DEBUG)
+ goto debug_dev_found;
+ else
+ dprintk(BIOS_INFO, "Invalid debug device descriptor.\n");
+ }
+ if (devnum == 0) {
+ devnum = USB_DEBUG_DEVNUM;
+ goto debug_dev_retry;
+ } else {
+ dprintk(BIOS_INFO, "Could not find attached debug device.\n");
+ ret = -5;
+ goto err;
+ }
+debug_dev_found:
+
+ /* Move the device to 127 if it isn't already there */
+ if (devnum != USB_DEBUG_DEVNUM) {
+ ret = dbgp_control_msg(ehci_debug, devnum,
+ USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
+ if (ret < 0) {
+ dprintk(BIOS_INFO, "Could not move attached device to %d.\n",
+ USB_DEBUG_DEVNUM);
+ ret = -7;
+ goto err;
+ }
+ devnum = USB_DEBUG_DEVNUM;
+ dprintk(BIOS_INFO, "EHCI debug device renamed to 127.\n");
+ }
+
+ /* Enable the debug interface */
+ ret = dbgp_control_msg(ehci_debug, USB_DEBUG_DEVNUM,
+ USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
+ if (ret < 0) {
+ dprintk(BIOS_INFO, "Could not enable EHCI debug device.\n");
+ ret = -8;
+ goto err;
+ }
+ dprintk(BIOS_INFO, "EHCI debug interface enabled.\n");
+
+ /* Prepare endpoint pipes. */
+ for (i=1; i<DBGP_MAX_ENDPOINTS; i++) {
+ info->ep_pipe[i].devnum = USB_DEBUG_DEVNUM;
+ info->ep_pipe[i].pid = USB_PID_DATA0;
+ info->ep_pipe[i].timeout = 1000;
+ }
+ info->ep_pipe[DBGP_CONSOLE_EPOUT].endpoint = dbgp_desc.bDebugOutEndpoint;
+ info->ep_pipe[DBGP_CONSOLE_EPIN].endpoint = dbgp_desc.bDebugInEndpoint;
+
+ /* Perform a small write. */
+ configured = 0;
+small_write:
+ ret = dbgp_bulk_write(ehci_debug, &info->ep_pipe[DBGP_CONSOLE_EPOUT], "USB\r\n",5);
+ if (ret < 0) {
+ dprintk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret);
+ if (!configured) {
+ /* Send Set Configure request to device. This is required for FX2
+ (CY7C68013) to transfer from USB state Addressed to Configured,
+ only then endpoints other than 0 are enabled. */
+ if (dbgp_control_msg(ehci_debug, USB_DEBUG_DEVNUM,
+ USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_SET_CONFIGURATION, 1, 0, NULL, 0) >= 0) {
+ configured = 1;
+ goto small_write;
+ }
+ }
+ ret = -9;
+ goto err;
+ }
+ dprintk(BIOS_INFO, "Test write done\n");
+
+ info->ehci_caps = ehci_caps;
+ info->ehci_regs = ehci_regs;
+ info->ehci_debug = ehci_debug;
+
+ info->ep_pipe[DBGP_SETUP_EP0].status |= DBGP_EP_ENABLED | DBGP_EP_VALID;
+ info->ep_pipe[DBGP_CONSOLE_EPOUT].status |= DBGP_EP_ENABLED | DBGP_EP_VALID;
+ info->ep_pipe[DBGP_CONSOLE_EPIN].status |= DBGP_EP_ENABLED | DBGP_EP_VALID;
+ return 0;
+err:
+ /* Things didn't work so remove my claim */
+ ctrl = read32((unsigned long)&ehci_debug->control);
+ ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
+ write32((unsigned long)(unsigned long)&ehci_debug->control, ctrl);
+ //return ret;
+
+next_debug_port:
+#if CONFIG_USBDEBUG_DEFAULT_PORT==0
+ port_map_tried |= (1 << (debug_port - 1));
+ new_debug_port = ((debug_port-1 + 1) % n_ports) + 1;
+ if (port_map_tried != ((1 << n_ports) - 1)) {
+ set_debug_port(new_debug_port);
+ goto try_next_port;
+ }
+ if (--playtimes) {
+ set_debug_port(new_debug_port);
+ goto try_next_time;
+ }
+#else
+ if (0)
+ goto try_next_port;
+ if (--playtimes)
+ goto try_next_time;
+#endif
+
+ return -10;
+}
+
+#if CONFIG_DEBUG_USBDEBUG
+static int dbgp_enabled(void)
+{
+ struct dbgp_pipe *globals = &dbgp_ehci_info()->ep_pipe[DBGP_SETUP_EP0];
+ return (globals->status & DBGP_EP_ENABLED);
+}
+#endif
+
+static int dbgp_try_get(struct dbgp_pipe *pipe)
+{
+ struct dbgp_pipe *globals = &dbgp_ehci_info()->ep_pipe[DBGP_SETUP_EP0];
+ if (!dbgp_ep_is_active(pipe) || (globals->status & DBGP_EP_BUSY))
+ return 0;
+ globals->status |= DBGP_EP_BUSY;
+ pipe->status |= DBGP_EP_BUSY;
+ return 1;
+}
+
+static void dbgp_put(struct dbgp_pipe *pipe)
+{
+ struct dbgp_pipe *globals = &dbgp_ehci_info()->ep_pipe[DBGP_SETUP_EP0];
+ globals->status &= ~DBGP_EP_BUSY;
+ pipe->status &= ~DBGP_EP_BUSY;
+}
+
+void usbdebug_tx_byte(struct dbgp_pipe *pipe, unsigned char data)
+{
+ if (!dbgp_try_get(pipe))
+ return;
+ pipe->buf[pipe->bufidx++] = data;
+ if (pipe->bufidx >= 8) {
+ dbgp_bulk_write_x(pipe, pipe->buf, pipe->bufidx);
+ pipe->bufidx = 0;
+ }
+ dbgp_put(pipe);
+}
+
+void usbdebug_tx_flush(struct dbgp_pipe *pipe)
+{
+ if (!dbgp_try_get(pipe))
+ return;
+ if (pipe->bufidx > 0) {
+ dbgp_bulk_write_x(pipe, pipe->buf, pipe->bufidx);
+ pipe->bufidx = 0;
+ }
+ dbgp_put(pipe);
+}
+
+#if !defined(__PRE_RAM__) && !defined(__SMM__)
+static void usbdebug_re_enable(unsigned ehci_base)
+{
+ struct ehci_debug_info *dbg_info = dbgp_ehci_info();
+ unsigned diff;
+ int i;
+
+ if (!dbg_info->ehci_debug)
+ return;
+
+ diff = (unsigned)dbg_info->ehci_caps - ehci_base;
+ dbg_info->ehci_regs -= diff;
+ dbg_info->ehci_debug -= diff;
+ dbg_info->ehci_caps = (void*)ehci_base;
+
+ for (i=0; i<DBGP_MAX_ENDPOINTS; i++)
+ dbg_info->ep_pipe[i].status |= DBGP_EP_ENABLED;
+}
+
+static void usbdebug_disable(void)
+{
+ struct ehci_debug_info *dbg_info = dbgp_ehci_info();
+ int i;
+ for (i=0; i<DBGP_MAX_ENDPOINTS; i++)
+ dbg_info->ep_pipe[i].status &= ~DBGP_EP_ENABLED;
+}
+
+static void pci_ehci_set_resources(struct device *dev)
+{
+ struct resource *res;
+
+ printk(BIOS_DEBUG, "%s EHCI Debug Port hook triggered\n", dev_path(dev));
+ usbdebug_disable();
+
+ if (ehci_drv_ops->set_resources)
+ ehci_drv_ops->set_resources(dev);
+ res = find_resource(dev, EHCI_BAR_INDEX);
+ if (!res)
+ return;
+
+ usbdebug_re_enable((u32)res->base);
+ report_resource_stored(dev, res, "");
+ printk(BIOS_DEBUG, "%s EHCI Debug Port relocated\n", dev_path(dev));
+}
+
+void pci_ehci_read_resources(struct device *dev)
+{
+ pci_devfn_t dbg_dev = pci_ehci_dbg_dev(CONFIG_USBDEBUG_HCD_INDEX);
+
+ if (!ehci_drv_ops && pci_match_simple_dev(dev, dbg_dev)) {
+ memcpy(&ehci_dbg_ops, dev->ops, sizeof(ehci_dbg_ops));
+ ehci_drv_ops = dev->ops;
+ ehci_dbg_ops.set_resources = pci_ehci_set_resources;
+ dev->ops = &ehci_dbg_ops;
+ printk(BIOS_DEBUG, "%s EHCI BAR hook registered\n", dev_path(dev));
+ } else {
+ printk(BIOS_DEBUG, "More than one caller of %s from %s\n", __func__, dev_path(dev));
+ }
+
+ pci_dev_read_resources(dev);
+}
+#endif
+
+#if !defined(__PRE_RAM__) && !defined(__SMM__)
+static int get_usbdebug_from_cbmem(struct ehci_debug_info *info)
+{
+ struct ehci_debug_info *dbg_info_cbmem;
+
+ dbg_info_cbmem = cbmem_find(CBMEM_ID_EHCI_DEBUG);
+ if (dbg_info_cbmem == NULL)
+ return -1;
+
+ memcpy(info, dbg_info_cbmem, sizeof (*info));
+ printk(BIOS_DEBUG, "EHCI debug port found in CBMEM.\n");
+
+ return 0;
+}
+
+#elif defined(__PRE_RAM__)
+static void migrate_ehci_debug(void)
+{
+ struct ehci_debug_info *dbg_info = dbgp_ehci_info();
+ struct ehci_debug_info *dbg_info_cbmem;
+
+ dbg_info_cbmem = cbmem_add(CBMEM_ID_EHCI_DEBUG, sizeof(*dbg_info));
+ if (dbg_info_cbmem == NULL)
+ return;
+
+ memcpy(dbg_info_cbmem, dbg_info, sizeof(*dbg_info));
+}
+CAR_MIGRATE(migrate_ehci_debug);
+#endif
+
+unsigned long pci_ehci_base_regs(pci_devfn_t sdev)
+{
+#ifdef __SIMPLE_DEVICE__
+ unsigned long base = pci_read_config32(sdev, EHCI_BAR_INDEX) & ~0x0f;
+#else
+ device_t dev = dev_find_slot(PCI_DEV2SEGBUS(sdev), PCI_DEV2DEVFN(sdev));
+ unsigned long base = pci_read_config32(dev, EHCI_BAR_INDEX) & ~0x0f;
+#endif
+ return base + HC_LENGTH(read32(base));
+}
+
+int dbgp_ep_is_active(struct dbgp_pipe *pipe)
+{
+ return (pipe->status & DBGP_EP_STATMASK) == (DBGP_EP_VALID | DBGP_EP_ENABLED);
+}
+
+struct dbgp_pipe *dbgp_console_output(void)
+{
+ return &dbgp_ehci_info()->ep_pipe[DBGP_CONSOLE_EPOUT];
+}
+
+struct dbgp_pipe *dbgp_console_input(void)
+{
+ return &dbgp_ehci_info()->ep_pipe[DBGP_CONSOLE_EPIN];
+}
+
+int usbdebug_init(void)
+{
+ struct ehci_debug_info *dbg_info = dbgp_ehci_info();
+
+#if !defined(__PRE_RAM__) && !defined(__SMM__)
+ if (!get_usbdebug_from_cbmem(dbg_info))
+ return 0;
+#endif
+ enable_usbdebug();
+ return usbdebug_init_(CONFIG_EHCI_BAR, CONFIG_EHCI_DEBUG_OFFSET, dbg_info);
+}
diff --git a/src/drivers/usb/usb_ch9.h b/src/drivers/usb/usb_ch9.h
new file mode 100644
index 0000000000..b0aa7730f7
--- /dev/null
+++ b/src/drivers/usb/usb_ch9.h
@@ -0,0 +1,102 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
+#ifndef USB_CH9_H
+#define USB_CH9_H
+
+#define USB_DIR_OUT 0 /* to device */
+#define USB_DIR_IN 0x80 /* to host */
+
+/*
+ * USB types, the second of three bRequestType fields
+ */
+#define USB_TYPE_MASK (0x03 << 5)
+#define USB_TYPE_STANDARD (0x00 << 5)
+#define USB_TYPE_CLASS (0x01 << 5)
+#define USB_TYPE_VENDOR (0x02 << 5)
+#define USB_TYPE_RESERVED (0x03 << 5)
+/*
+ * USB recipients, the third of three bRequestType fields
+ */
+#define USB_RECIP_MASK 0x1f
+#define USB_RECIP_DEVICE 0x00
+#define USB_RECIP_INTERFACE 0x01
+#define USB_RECIP_ENDPOINT 0x02
+#define USB_RECIP_OTHER 0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT 0x04
+#define USB_RECIP_RPIPE 0x05
+
+/*
+ * Standard requests, for the bRequest field of a SETUP packet.
+ *
+ * These are qualified by the bRequestType field, so that for example
+ * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
+ * by a GET_STATUS request.
+ */
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+
+#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
+#define USB_REQ_GET_ENCRYPTION 0x0E
+#define USB_REQ_RPIPE_ABORT 0x0E
+#define USB_REQ_SET_HANDSHAKE 0x0F
+#define USB_REQ_RPIPE_RESET 0x0F
+#define USB_REQ_GET_HANDSHAKE 0x10
+#define USB_REQ_SET_CONNECTION 0x11
+#define USB_REQ_SET_SECURITY_DATA 0x12
+#define USB_REQ_GET_SECURITY_DATA 0x13
+#define USB_REQ_SET_WUSB_DATA 0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
+#define USB_REQ_LOOPBACK_DATA_READ 0x16
+#define USB_REQ_SET_INTERFACE_DS 0x17
+
+#define USB_DT_DEBUG 0x0a
+
+#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
+
+struct usb_ctrlrequest {
+ u8 bRequestType;
+ u8 bRequest;
+ u16 wValue;
+ u16 wIndex;
+ u16 wLength;
+} __attribute__ ((packed));
+
+struct usb_debug_descriptor {
+ u8 bLength;
+ u8 bDescriptorType;
+
+ /* bulk endpoints with 8 byte maxpacket */
+ u8 bDebugInEndpoint;
+ u8 bDebugOutEndpoint;
+};
+
+#endif
+