diff options
Diffstat (limited to 'src/drivers/xgi/common/initdef.h')
-rw-r--r-- | src/drivers/xgi/common/initdef.h | 708 |
1 files changed, 708 insertions, 0 deletions
diff --git a/src/drivers/xgi/common/initdef.h b/src/drivers/xgi/common/initdef.h new file mode 100644 index 0000000000..264b55a594 --- /dev/null +++ b/src/drivers/xgi/common/initdef.h @@ -0,0 +1,708 @@ +/* $XFree86$ */ +/* $XdotOrg$ */ +/* + * Global definitions for init.c and init301.c + * + * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria + * + * If distributed as part of the Linux kernel, the following license terms + * apply: + * + * * This program is free software; you can redistribute it and/or modify + * * it under the terms of the GNU General Public License as published by + * * the Free Software Foundation; either version 2 of the named License, + * * or any later version. + * * + * * This program is distributed in the hope that it will be useful, + * * but WITHOUT ANY WARRANTY; without even the implied warranty of + * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * * GNU General Public License for more details. + * * + * * You should have received a copy of the GNU General Public License + * * along with this program; if not, write to the Free Software + * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA + * + * Otherwise, the following license terms apply: + * + * * Redistribution and use in source and binary forms, with or without + * * modification, are permitted provided that the following conditions + * * are met: + * * 1) Redistributions of source code must retain the above copyright + * * notice, this list of conditions and the following disclaimer. + * * 2) Redistributions in binary form must reproduce the above copyright + * * notice, this list of conditions and the following disclaimer in the + * * documentation and/or other materials provided with the distribution. + * * 3) The name of the author may not be used to endorse or promote products + * * derived from this software without specific prior written permission. + * * + * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Author: Thomas Winischhofer <thomas@winischhofer.net> + * + */ + +#ifndef _INITDEF_ +#define _INITDEF_ + +#define IS_SIS330 (SiS_Pr->ChipType == SIS_330) +#define IS_SIS550 (SiS_Pr->ChipType == SIS_550) +#define IS_SIS650 (SiS_Pr->ChipType == SIS_650) /* All versions, incl 651, M65x */ +#define IS_SIS740 (SiS_Pr->ChipType == SIS_740) +#define IS_SIS651 (SiS_Pr->SiS_SysFlags & (SF_Is651 | SF_Is652)) +#define IS_SISM650 (SiS_Pr->SiS_SysFlags & (SF_IsM650 | SF_IsM652 | SF_IsM653)) +#define IS_SIS65x (IS_SIS651 || IS_SISM650) /* Only special versions of 65x */ +#define IS_SIS661 (SiS_Pr->ChipType == SIS_661) +#define IS_SIS741 (SiS_Pr->ChipType == SIS_741) +#define IS_SIS660 (SiS_Pr->ChipType == SIS_660) +#define IS_SIS760 (SiS_Pr->ChipType == SIS_760) +#define IS_SIS761 (SiS_Pr->ChipType == SIS_761) +#define IS_SIS661741660760 (IS_SIS661 || IS_SIS741 || IS_SIS660 || IS_SIS760 || IS_SIS761) +#define IS_SIS650740 ((SiS_Pr->ChipType >= SIS_650) && (SiS_Pr->ChipType < SIS_330)) +#define IS_SIS550650740 (IS_SIS550 || IS_SIS650740) +#define IS_SIS650740660 (IS_SIS650 || IS_SIS740 || IS_SIS661741660760) +#define IS_SIS550650740660 (IS_SIS550 || IS_SIS650740660) + +#define SISGETROMW(x) (ROMAddr[(x)] | (ROMAddr[(x)+1] << 8)) + +/* SiS_VBType */ +#define VB_SIS301 0x0001 +#define VB_SIS301B 0x0002 +#define VB_SIS302B 0x0004 +#define VB_SIS301LV 0x0008 +#define VB_SIS302LV 0x0010 +#define VB_SIS302ELV 0x0020 +#define VB_SIS301C 0x0040 +#define VB_SIS307T 0x0080 +#define VB_SIS307LV 0x0100 +#define VB_UMC 0x4000 +#define VB_NoLCD 0x8000 +#define VB_SIS30xB (VB_SIS301B | VB_SIS301C | VB_SIS302B | VB_SIS307T) +#define VB_SIS30xC (VB_SIS301C | VB_SIS307T) +#define VB_SISTMDS (VB_SIS301 | VB_SIS301B | VB_SIS301C | VB_SIS302B | VB_SIS307T) +#define VB_SISLVDS (VB_SIS301LV | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV) +#define VB_SIS30xBLV (VB_SIS30xB | VB_SISLVDS) +#define VB_SIS30xCLV (VB_SIS30xC | VB_SIS302ELV | VB_SIS307LV) +#define VB_SISVB (VB_SIS301 | VB_SIS30xBLV) +#define VB_SISLCDA (VB_SIS302B | VB_SIS301C | VB_SIS307T | VB_SISLVDS) +#define VB_SISTMDSLCDA (VB_SIS301C | VB_SIS307T) +#define VB_SISPART4SCALER (VB_SIS301C | VB_SIS307T | VB_SIS302ELV | VB_SIS307LV) +#define VB_SISHIVISION (VB_SIS301 | VB_SIS301B | VB_SIS302B) +#define VB_SISYPBPR (VB_SIS301C | VB_SIS307T | VB_SIS301LV | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV) +#define VB_SISTAP4SCALER (VB_SIS301C | VB_SIS307T | VB_SIS302ELV | VB_SIS307LV) +#define VB_SISPART4OVERFLOW (VB_SIS301C | VB_SIS307T | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV) +#define VB_SISPWD (VB_SIS301C | VB_SIS307T | VB_SISLVDS) +#define VB_SISEMI (VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV) +#define VB_SISPOWER (VB_SIS301C | VB_SIS307T | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV) +#define VB_SISDUALLINK (VB_SIS302LV | VB_SIS302ELV | VB_SIS307T | VB_SIS307LV) +#define VB_SISVGA2 VB_SISTMDS +#define VB_SISRAMDAC202 (VB_SIS301C | VB_SIS307T) + +/* VBInfo */ +#define SetSimuScanMode 0x0001 /* CR 30 */ +#define SwitchCRT2 0x0002 +#define SetCRT2ToAVIDEO 0x0004 +#define SetCRT2ToSVIDEO 0x0008 +#define SetCRT2ToSCART 0x0010 +#define SetCRT2ToLCD 0x0020 +#define SetCRT2ToRAMDAC 0x0040 +#define SetCRT2ToHiVision 0x0080 /* for SiS bridge */ +#define SetCRT2ToCHYPbPr SetCRT2ToHiVision /* for Chrontel */ +#define SetNTSCTV 0x0000 /* CR 31 */ +#define SetPALTV 0x0100 /* Deprecated here, now in TVMode */ +#define SetInSlaveMode 0x0200 +#define SetNotSimuMode 0x0400 +#define SetNotSimuTVMode SetNotSimuMode +#define SetDispDevSwitch 0x0800 +#define SetCRT2ToYPbPr525750 0x0800 +#define LoadDACFlag 0x1000 +#define DisableCRT2Display 0x2000 +#define DriverMode 0x4000 +#define HotKeySwitch 0x8000 +#define SetCRT2ToLCDA 0x8000 + +/* v-- Needs change in sis_vga.c if changed (GPIO) --v */ +#define SetCRT2ToTV (SetCRT2ToYPbPr525750|SetCRT2ToHiVision|SetCRT2ToSCART|SetCRT2ToSVIDEO|SetCRT2ToAVIDEO) +#define SetCRT2ToTVNoYPbPrHiVision (SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO) +#define SetCRT2ToTVNoHiVision (SetCRT2ToYPbPr525750 | SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO) + +/* SiS_ModeType */ +#define ModeText 0x00 +#define ModeCGA 0x01 +#define ModeEGA 0x02 +#define ModeVGA 0x03 +#define Mode15Bpp 0x04 +#define Mode16Bpp 0x05 +#define Mode24Bpp 0x06 +#define Mode32Bpp 0x07 + +#define ModeTypeMask 0x07 +#define IsTextMode 0x07 + +#define DACInfoFlag 0x0018 +#define MemoryInfoFlag 0x01E0 +#define MemorySizeShift 5 + +/* modeflag */ +#define Charx8Dot 0x0200 +#define LineCompareOff 0x0400 +#define CRT2Mode 0x0800 +#define HalfDCLK 0x1000 +#define NoSupportSimuTV 0x2000 +#define NoSupportLCDScale 0x4000 /* SiS bridge: No scaling possible (no matter what panel) */ +#define DoubleScanMode 0x8000 + +/* Infoflag */ +#define SupportTV 0x0008 +#define SupportTV1024 0x0800 +#define SupportCHTV 0x0800 +#define Support64048060Hz 0x0800 /* Special for 640x480 LCD */ +#define SupportHiVision 0x0010 +#define SupportYPbPr750p 0x1000 +#define SupportLCD 0x0020 +#define SupportRAMDAC2 0x0040 /* All (<= 100Mhz) */ +#define SupportRAMDAC2_135 0x0100 /* All except DH (<= 135Mhz) */ +#define SupportRAMDAC2_162 0x0200 /* B, C (<= 162Mhz) */ +#define SupportRAMDAC2_202 0x0400 /* C (<= 202Mhz) */ +#define InterlaceMode 0x0080 +#define SyncPP 0x0000 +#define HaveWideTiming 0x2000 /* Have specific wide- and non-wide timing */ +#define SyncPN 0x4000 +#define SyncNP 0x8000 +#define SyncNN 0xc000 + +/* SetFlag */ +#define ProgrammingCRT2 0x0001 +#define LowModeTests 0x0002 +/* #define TVSimuMode 0x0002 - deprecated */ +/* #define RPLLDIV2XO 0x0004 - deprecated */ +#define LCDVESATiming 0x0008 +#define EnableLVDSDDA 0x0010 +#define SetDispDevSwitchFlag 0x0020 +#define CheckWinDos 0x0040 +#define SetDOSMode 0x0080 + +/* TVMode flag */ +#define TVSetPAL 0x0001 +#define TVSetNTSCJ 0x0002 +#define TVSetPALM 0x0004 +#define TVSetPALN 0x0008 +#define TVSetCHOverScan 0x0010 +#define TVSetYPbPr525i 0x0020 /* new 0x10 */ +#define TVSetYPbPr525p 0x0040 /* new 0x20 */ +#define TVSetYPbPr750p 0x0080 /* new 0x40 */ +#define TVSetHiVision 0x0100 /* new 0x80; = 1080i, software-wise identical */ +#define TVSetTVSimuMode 0x0200 /* new 0x200, prev. 0x800 */ +#define TVRPLLDIV2XO 0x0400 /* prev 0x1000 */ +#define TVSetNTSC1024 0x0800 /* new 0x100, prev. 0x2000 */ +#define TVSet525p1024 0x1000 /* TW */ +#define TVAspect43 0x2000 +#define TVAspect169 0x4000 +#define TVAspect43LB 0x8000 + +/* YPbPr flag (>=315, <661; converted to TVMode) */ +#define YPbPr525p 0x0001 +#define YPbPr750p 0x0002 +#define YPbPr525i 0x0004 +#define YPbPrHiVision 0x0008 +#define YPbPrModeMask (YPbPr750p | YPbPr525p | YPbPr525i | YPbPrHiVision) + +/* SysFlags (to identify special versions) */ +#define SF_Is651 0x0001 +#define SF_IsM650 0x0002 +#define SF_Is652 0x0004 +#define SF_IsM652 0x0008 +#define SF_IsM653 0x0010 +#define SF_IsM661 0x0020 +#define SF_IsM741 0x0040 +#define SF_IsM760 0x0080 +#define SF_760UMA 0x4000 /* 76x: We have UMA */ +#define SF_760LFB 0x8000 /* 76x: We have LFB */ + +/* CR32 (Newer 630, and 315 series) + + [0] VB connected with CVBS + [1] VB connected with SVHS + [2] VB connected with SCART + [3] VB connected with LCD + [4] VB connected with CRT2 (secondary VGA) + [5] CRT1 monitor is connected + [6] VB connected with Hi-Vision TV + [7] <= 330: VB connected with DVI combo connector + >= 661: VB connected to YPbPr +*/ + +/* CR35 (300 series only) */ +#define TVOverScan 0x10 +#define TVOverScanShift 4 + +/* CR35 (661 series only) + [0] 1 = PAL, 0 = NTSC + [1] 1 = NTSC-J (if D0 = 0) + [2] 1 = PALM (if D0 = 1) + [3] 1 = PALN (if D0 = 1) + [4] 1 = Overscan (Chrontel only) + [7:5] (only if D2 in CR38 is set) + 000 525i + 001 525p + 010 750p + 011 1080i (or HiVision on 301, 301B) +*/ + +/* CR37 + [0] Set 24/18 bit (0/1) RGB to LVDS/TMDS transmitter (set by BIOS) + [3:1] External chip + 300 series: + 001 SiS301 (never seen) + 010 LVDS + 011 LVDS + Tumpion Zurac + 100 LVDS + Chrontel 7005 + 110 Chrontel 7005 + 315/330 series + 001 SiS30x (never seen) + 010 LVDS + 011 LVDS + Chrontel 7019 + 660 series [2:1] only: + reserved (chip type now in CR38) + All other combinations reserved + [3] 661 only: Pass 1:1 data + [4] LVDS: 0: Panel Link expands / 1: Panel Link does not expand + 30x: 0: Bridge scales / 1: Bridge does not scale = Panel scales (if possible) + [5] LCD polarity select + 0: VESA DMT Standard + 1: EDID 2.x defined + [6] LCD horizontal polarity select + 0: High active + 1: Low active + [7] LCD vertical polarity select + 0: High active + 1: Low active +*/ + +/* CR37: LCDInfo */ +#define LCDRGB18Bit 0x0001 +#define LCDNonExpanding 0x0010 +#define LCDSync 0x0020 +#define LCDPass11 0x0100 /* 0: center screen, 1: Pass 1:1 data */ +#define LCDDualLink 0x0200 + +#define DontExpandLCD LCDNonExpanding +#define LCDNonExpandingShift 4 +#define DontExpandLCDShift LCDNonExpandingShift +#define LCDSyncBit 0x00e0 +#define LCDSyncShift 6 + +/* CR38 (315 series) */ +#define EnableDualEdge 0x01 +#define SetToLCDA 0x02 /* LCD channel A (301C/302B/30x(E)LV and 650+LVDS only) */ +#define EnableCHScart 0x04 /* Scart on Ch7019 (unofficial definition - TW) */ +#define EnableCHYPbPr 0x08 /* YPbPr on Ch7019 (480i HDTV); only on 650/Ch7019 systems */ +#define EnableSiSYPbPr 0x08 /* Enable YPbPr mode (30xLV/301C only) */ +#define EnableYPbPr525i 0x00 /* Enable 525i YPbPr mode (30xLV/301C only) (mask 0x30) */ +#define EnableYPbPr525p 0x10 /* Enable 525p YPbPr mode (30xLV/301C only) (mask 0x30) */ +#define EnableYPbPr750p 0x20 /* Enable 750p YPbPr mode (30xLV/301C only) (mask 0x30) */ +#define EnableYPbPr1080i 0x30 /* Enable 1080i YPbPr mode (30xLV/301C only) (mask 0x30) */ +#define EnablePALM 0x40 /* 1 = Set PALM */ +#define EnablePALN 0x80 /* 1 = Set PALN */ +#define EnableNTSCJ EnablePALM /* Not BIOS */ + +/* CR38 (661 and later) + D[7:5] 000 No VB + 001 301 series VB + 010 LVDS + 011 Chrontel 7019 + 100 Conexant + D2 Enable YPbPr output (see CR35) + D[1:0] LCDA (like before) +*/ + +#define EnablePALMN 0x40 /* Romflag: 1 = Allow PALM/PALN */ + +/* CR39 (650 only) */ +#define LCDPass1_1 0x01 /* 0: center screen, 1: pass 1:1 data output */ +#define Enable302LV_DualLink 0x04 /* 302LV only; enable dual link */ + +/* CR39 (661 and later) + D[7] LVDS (SiS or third party) + D[1:0] YPbPr Aspect Ratio + 00 4:3 letterbox + 01 4:3 + 10 16:9 + 11 4:3 +*/ + +/* CR3B (651+301C) + D[1:0] YPbPr Aspect Ratio + ? +*/ + +/* CR79 (315/330 series only; not 661 and later) + [3-0] Notify driver + 0001 Mode Switch event (set by BIOS) + 0010 Epansion On/Off event + 0011 TV UnderScan/OverScan event + 0100 Set Brightness event + 0101 Set Contrast event + 0110 Set Mute event + 0111 Set Volume Up/Down event + [4] Enable Backlight Control by BIOS/driver + (set by driver; set means that the BIOS should + not touch the backlight registers because eg. + the driver already switched off the backlight) + [5] PAL/NTSC (set by BIOS) + [6] Expansion On/Off (set by BIOS; copied to CR32[4]) + [7] TV UnderScan/OverScan (set by BIOS) +*/ + +/* CR7C - 661 and later + [7] DualEdge enabled (or: to be enabled) + [6] CRT2 = TV/LCD/VGA enabled (or: to be enabled) + [5] Init done (set at end of SiS_Init) + {4] LVDS LCD capabilities + [3] LVDS LCD capabilities + [2] LVDS LCD capabilities (PWD) + [1] LVDS LCD capabilities (PWD) + [0] LVDS=1, TMDS=0 (SiS or third party) +*/ + +/* CR7E - 661 and later + VBType: + [7] LVDS (third party) + [3] 301C + [2] 302LV + [1] 301LV + [0] 301B +*/ + +/* LCDResInfo */ +#define Panel300_800x600 0x01 /* CR36 */ +#define Panel300_1024x768 0x02 +#define Panel300_1280x1024 0x03 +#define Panel300_1280x960 0x04 +#define Panel300_640x480 0x05 +#define Panel300_1024x600 0x06 +#define Panel300_1152x768 0x07 +#define Panel300_1280x768 0x0a +#define Panel300_Custom 0x0f +#define Panel300_Barco1366 0x10 + +#define Panel310_800x600 0x01 +#define Panel310_1024x768 0x02 +#define Panel310_1280x1024 0x03 +#define Panel310_640x480 0x04 +#define Panel310_1024x600 0x05 +#define Panel310_1152x864 0x06 +#define Panel310_1280x960 0x07 +#define Panel310_1152x768 0x08 /* LVDS only */ +#define Panel310_1400x1050 0x09 +#define Panel310_1280x768 0x0a +#define Panel310_1600x1200 0x0b +#define Panel310_320x240_2 0x0c /* xSTN */ +#define Panel310_320x240_3 0x0d /* xSTN */ +#define Panel310_320x240_1 0x0e /* xSTN - This is fake, can be any */ +#define Panel310_Custom 0x0f + +#define Panel661_800x600 0x01 +#define Panel661_1024x768 0x02 +#define Panel661_1280x1024 0x03 +#define Panel661_640x480 0x04 +#define Panel661_1024x600 0x05 +#define Panel661_1152x864 0x06 +#define Panel661_1280x960 0x07 +#define Panel661_1280x854 0x08 +#define Panel661_1400x1050 0x09 +#define Panel661_1280x768 0x0a +#define Panel661_1600x1200 0x0b +#define Panel661_1280x800 0x0c +#define Panel661_1680x1050 0x0d +#define Panel661_1280x720 0x0e +#define Panel661_Custom 0x0f + +#define Panel_800x600 0x01 /* Unified values */ +#define Panel_1024x768 0x02 /* MUST match BIOS values from 0-e */ +#define Panel_1280x1024 0x03 +#define Panel_640x480 0x04 +#define Panel_1024x600 0x05 +#define Panel_1152x864 0x06 +#define Panel_1280x960 0x07 +#define Panel_1152x768 0x08 /* LVDS only */ +#define Panel_1400x1050 0x09 +#define Panel_1280x768 0x0a /* 30xB/C and LVDS only (BIOS: all) */ +#define Panel_1600x1200 0x0b +#define Panel_1280x800 0x0c /* 661etc (TMDS) */ +#define Panel_1680x1050 0x0d /* 661etc */ +#define Panel_1280x720 0x0e /* 661etc */ +#define Panel_Custom 0x0f /* MUST BE 0x0f (for DVI DDC detection) */ +#define Panel_320x240_1 0x10 /* SiS 550 xSTN */ +#define Panel_Barco1366 0x11 +#define Panel_848x480 0x12 +#define Panel_320x240_2 0x13 /* SiS 550 xSTN */ +#define Panel_320x240_3 0x14 /* SiS 550 xSTN */ +#define Panel_1280x768_2 0x15 /* 30xLV */ +#define Panel_1280x768_3 0x16 /* (unused) */ +#define Panel_1280x800_2 0x17 /* 30xLV */ +#define Panel_856x480 0x18 +#define Panel_1280x854 0x19 /* 661etc */ + +/* Index in ModeResInfo table */ +#define SIS_RI_320x200 0 +#define SIS_RI_320x240 1 +#define SIS_RI_320x400 2 +#define SIS_RI_400x300 3 +#define SIS_RI_512x384 4 +#define SIS_RI_640x400 5 +#define SIS_RI_640x480 6 +#define SIS_RI_800x600 7 +#define SIS_RI_1024x768 8 +#define SIS_RI_1280x1024 9 +#define SIS_RI_1600x1200 10 +#define SIS_RI_1920x1440 11 +#define SIS_RI_2048x1536 12 +#define SIS_RI_720x480 13 +#define SIS_RI_720x576 14 +#define SIS_RI_1280x960 15 +#define SIS_RI_800x480 16 +#define SIS_RI_1024x576 17 +#define SIS_RI_1280x720 18 +#define SIS_RI_856x480 19 +#define SIS_RI_1280x768 20 +#define SIS_RI_1400x1050 21 +#define SIS_RI_1152x864 22 /* Up to here SiS conforming */ +#define SIS_RI_848x480 23 +#define SIS_RI_1360x768 24 +#define SIS_RI_1024x600 25 +#define SIS_RI_1152x768 26 +#define SIS_RI_768x576 27 +#define SIS_RI_1360x1024 28 +#define SIS_RI_1680x1050 29 +#define SIS_RI_1280x800 30 +#define SIS_RI_1920x1080 31 +#define SIS_RI_960x540 32 +#define SIS_RI_960x600 33 +#define SIS_RI_1280x854 34 + +/* CR5F */ +#define IsM650 0x80 + +/* Timing data */ +#define NTSCHT 1716 +#define NTSC2HT 1920 +#define NTSCVT 525 +#define PALHT 1728 +#define PALVT 625 +#define StHiTVHT 892 +#define StHiTVVT 1126 +#define StHiTextTVHT 1000 +#define StHiTextTVVT 1126 +#define ExtHiTVHT 2100 +#define ExtHiTVVT 1125 + +/* Indices in (VB)VCLKData tables */ + +#define VCLK28 0x00 /* Index in VCLKData table (300 and 315) */ +#define VCLK40 0x04 /* Index in VCLKData table (300 and 315) */ +#define VCLK65_300 0x09 /* Index in VCLKData table (300) */ +#define VCLK108_2_300 0x14 /* Index in VCLKData table (300) */ +#define VCLK81_300 0x3f /* Index in VCLKData table (300) */ +#define VCLK108_3_300 0x42 /* Index in VCLKData table (300) */ +#define VCLK100_300 0x43 /* Index in VCLKData table (300) */ +#define VCLK34_300 0x3d /* Index in VCLKData table (300) */ +#define VCLK_CUSTOM_300 0x47 + +#define VCLK65_315 0x0b /* Indices in (VB)VCLKData table (315) */ +#define VCLK108_2_315 0x19 +#define VCLK81_315 0x5b +#define VCLK162_315 0x5e +#define VCLK108_3_315 0x45 +#define VCLK100_315 0x46 +#define VCLK34_315 0x55 +#define VCLK68_315 0x0d +#define VCLK_1280x800_315_2 0x5c +#define VCLK121_315 0x5d +#define VCLK130_315 0x72 +#define VCLK_1280x720 0x5f +#define VCLK_1280x768_2 0x60 +#define VCLK_1280x768_3 0x61 /* (unused?) */ +#define VCLK_CUSTOM_315 0x62 +#define VCLK_1280x720_2 0x63 +#define VCLK_720x480 0x67 +#define VCLK_720x576 0x68 +#define VCLK_768x576 0x68 +#define VCLK_848x480 0x65 +#define VCLK_856x480 0x66 +#define VCLK_800x480 0x65 +#define VCLK_1024x576 0x51 +#define VCLK_1152x864 0x64 +#define VCLK_1360x768 0x58 +#define VCLK_1280x800_315 0x6c +#define VCLK_1280x854 0x76 + +#define TVCLKBASE_300 0x21 /* Indices on TV clocks in VCLKData table (300) */ +#define TVCLKBASE_315 0x3a /* Indices on TV clocks in (VB)VCLKData table (315) */ +#define TVVCLKDIV2 0x00 /* Index relative to TVCLKBASE */ +#define TVVCLK 0x01 /* Index relative to TVCLKBASE */ +#define HiTVVCLKDIV2 0x02 /* Index relative to TVCLKBASE */ +#define HiTVVCLK 0x03 /* Index relative to TVCLKBASE */ +#define HiTVSimuVCLK 0x04 /* Index relative to TVCLKBASE */ +#define HiTVTextVCLK 0x05 /* Index relative to TVCLKBASE */ +#define YPbPr750pVCLK 0x25 /* Index relative to TVCLKBASE; was 0x0f NOT relative */ + +/* ------------------------------ */ + +#define SetSCARTOutput 0x01 + +#define HotPlugFunction 0x08 + +#define StStructSize 0x06 + +#define SIS_VIDEO_CAPTURE 0x00 - 0x30 +#define SIS_VIDEO_PLAYBACK 0x02 - 0x30 +#define SIS_CRT2_PORT_04 0x04 - 0x30 +#define SIS_CRT2_PORT_10 0x10 - 0x30 +#define SIS_CRT2_PORT_12 0x12 - 0x30 +#define SIS_CRT2_PORT_14 0x14 - 0x30 + +#define ADR_CRT2PtrData 0x20E +#define offset_Zurac 0x210 /* TW: Trumpion Zurac data pointer */ +#define ADR_LVDSDesPtrData 0x212 +#define ADR_LVDSCRT1DataPtr 0x214 +#define ADR_CHTVVCLKPtr 0x216 +#define ADR_CHTVRegDataPtr 0x218 + +#define LCDDataLen 8 +#define HiTVDataLen 12 +#define TVDataLen 16 + +#define LVDSDataLen 6 +#define LVDSDesDataLen 3 +#define ActiveNonExpanding 0x40 +#define ActiveNonExpandingShift 6 +#define ActivePAL 0x20 +#define ActivePALShift 5 +#define ModeSwitchStatus 0x0F +#define SoftTVType 0x40 +#define SoftSettingAddr 0x52 +#define ModeSettingAddr 0x53 + +#define _PanelType00 0x00 +#define _PanelType01 0x08 +#define _PanelType02 0x10 +#define _PanelType03 0x18 +#define _PanelType04 0x20 +#define _PanelType05 0x28 +#define _PanelType06 0x30 +#define _PanelType07 0x38 +#define _PanelType08 0x40 +#define _PanelType09 0x48 +#define _PanelType0A 0x50 +#define _PanelType0B 0x58 +#define _PanelType0C 0x60 +#define _PanelType0D 0x68 +#define _PanelType0E 0x70 +#define _PanelType0F 0x78 + +#define PRIMARY_VGA 0 /* 1: SiS is primary vga 0:SiS is secondary vga */ + +#define BIOSIDCodeAddr 0x235 /* Offsets to ptrs in BIOS image */ +#define OEMUtilIDCodeAddr 0x237 +#define VBModeIDTableAddr 0x239 +#define OEMTVPtrAddr 0x241 +#define PhaseTableAddr 0x243 +#define NTSCFilterTableAddr 0x245 +#define PALFilterTableAddr 0x247 +#define OEMLCDPtr_1Addr 0x249 +#define OEMLCDPtr_2Addr 0x24B +#define LCDHPosTable_1Addr 0x24D +#define LCDHPosTable_2Addr 0x24F +#define LCDVPosTable_1Addr 0x251 +#define LCDVPosTable_2Addr 0x253 +#define OEMLCDPIDTableAddr 0x255 + +#define VBModeStructSize 5 +#define PhaseTableSize 4 +#define FilterTableSize 4 +#define LCDHPosTableSize 7 +#define LCDVPosTableSize 5 +#define OEMLVDSPIDTableSize 4 +#define LVDSHPosTableSize 4 +#define LVDSVPosTableSize 6 + +#define VB_ModeID 0 +#define VB_TVTableIndex 1 +#define VB_LCDTableIndex 2 +#define VB_LCDHIndex 3 +#define VB_LCDVIndex 4 + +#define OEMLCDEnable 0x0001 +#define OEMLCDDelayEnable 0x0002 +#define OEMLCDPOSEnable 0x0004 +#define OEMTVEnable 0x0100 +#define OEMTVDelayEnable 0x0200 +#define OEMTVFlickerEnable 0x0400 +#define OEMTVPhaseEnable 0x0800 +#define OEMTVFilterEnable 0x1000 + +#define OEMLCDPanelIDSupport 0x0080 + +/* + ============================================================= + for 315 series (old data layout) + ============================================================= +*/ +#define SoftDRAMType 0x80 +#define SoftSetting_OFFSET 0x52 +#define SR07_OFFSET 0x7C +#define SR15_OFFSET 0x7D +#define SR16_OFFSET 0x81 +#define SR17_OFFSET 0x85 +#define SR19_OFFSET 0x8D +#define SR1F_OFFSET 0x99 +#define SR21_OFFSET 0x9A +#define SR22_OFFSET 0x9B +#define SR23_OFFSET 0x9C +#define SR24_OFFSET 0x9D +#define SR25_OFFSET 0x9E +#define SR31_OFFSET 0x9F +#define SR32_OFFSET 0xA0 +#define SR33_OFFSET 0xA1 + +#define CR40_OFFSET 0xA2 +#define SR25_1_OFFSET 0xF6 +#define CR49_OFFSET 0xF7 + +#define VB310Data_1_2_Offset 0xB6 +#define VB310Data_4_D_Offset 0xB7 +#define VB310Data_4_E_Offset 0xB8 +#define VB310Data_4_10_Offset 0xBB + +#define RGBSenseDataOffset 0xBD +#define YCSenseDataOffset 0xBF +#define VideoSenseDataOffset 0xC1 +#define OutputSelectOffset 0xF3 + +#define ECLK_MCLK_DISTANCE 0x14 +#define VBIOSTablePointerStart 0x100 +#define StandTablePtrOffset VBIOSTablePointerStart+0x02 +#define EModeIDTablePtrOffset VBIOSTablePointerStart+0x04 +#define CRT1TablePtrOffset VBIOSTablePointerStart+0x06 +#define ScreenOffsetPtrOffset VBIOSTablePointerStart+0x08 +#define VCLKDataPtrOffset VBIOSTablePointerStart+0x0A +#define MCLKDataPtrOffset VBIOSTablePointerStart+0x0E +#define CRT2PtrDataPtrOffset VBIOSTablePointerStart+0x10 +#define TVAntiFlickPtrOffset VBIOSTablePointerStart+0x12 +#define TVDelayPtr1Offset VBIOSTablePointerStart+0x14 +#define TVPhaseIncrPtr1Offset VBIOSTablePointerStart+0x16 +#define TVYFilterPtr1Offset VBIOSTablePointerStart+0x18 +#define LCDDelayPtr1Offset VBIOSTablePointerStart+0x20 +#define TVEdgePtr1Offset VBIOSTablePointerStart+0x24 +#define CRT2Delay1Offset VBIOSTablePointerStart+0x28 + +#endif |