summaryrefslogtreecommitdiff
path: root/src/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'src/drivers')
-rw-r--r--src/drivers/i2c/tpm/Kconfig18
-rw-r--r--src/drivers/i2c/tpm/Makefile.inc19
-rw-r--r--src/drivers/i2c/tpm/cr50.c466
-rw-r--r--src/drivers/i2c/tpm/tpm.c242
4 files changed, 508 insertions, 237 deletions
diff --git a/src/drivers/i2c/tpm/Kconfig b/src/drivers/i2c/tpm/Kconfig
index 903fc3bbe5..1725eaf0ff 100644
--- a/src/drivers/i2c/tpm/Kconfig
+++ b/src/drivers/i2c/tpm/Kconfig
@@ -2,6 +2,24 @@ config I2C_TPM
bool "I2C TPM"
depends on TPM || TPM2
+config MAINBOARD_HAS_I2C_TPM_CR50
+ bool
+ default n
+
+choice
+ prompt "I2C TPM Driver"
+ default I2C_TPM_CR50 if MAINBOARD_HAS_I2C_TPM_CR50
+ default I2C_TPM_GENERIC if !MAINBOARD_HAS_I2C_TPM_CR50
+ depends on I2C_TPM
+
+config I2C_TPM_GENERIC
+ bool "Generic I2C TPM Driver"
+
+config I2C_TPM_CR50
+ bool "CR50 I2C TPM Driver"
+
+endchoice
+
config DRIVER_TPM_I2C_BUS
hex "I2C TPM chip bus"
default 9 # FIXME, workaround for Kconfig BS
diff --git a/src/drivers/i2c/tpm/Makefile.inc b/src/drivers/i2c/tpm/Makefile.inc
index 3eb5de0518..7fcfc78d56 100644
--- a/src/drivers/i2c/tpm/Makefile.inc
+++ b/src/drivers/i2c/tpm/Makefile.inc
@@ -1,6 +1,17 @@
-ramstage-$(CONFIG_I2C_TPM) += tis.c tpm.c
-romstage-$(CONFIG_I2C_TPM) += tis.c tpm.c
-verstage-$(CONFIG_I2C_TPM) += tis.c tpm.c
-bootblock-$(CONFIG_I2C_TPM) += tis.c tpm.c
+
+ramstage-$(CONFIG_I2C_TPM) += tis.c
+romstage-$(CONFIG_I2C_TPM) += tis.c
+verstage-$(CONFIG_I2C_TPM) += tis.c
+bootblock-$(CONFIG_I2C_TPM) += tis.c
+
+ramstage-$(CONFIG_I2C_TPM_GENERIC) += tpm.c
+romstage-$(CONFIG_I2C_TPM_GENERIC) += tpm.c
+verstage-$(CONFIG_I2C_TPM_GENERIC) += tpm.c
+bootblock-$(CONFIG_I2C_TPM_GENERIC) += tpm.c
+
+ramstage-$(CONFIG_I2C_TPM_CR50) += cr50.c
+romstage-$(CONFIG_I2C_TPM_CR50) += cr50.c
+verstage-$(CONFIG_I2C_TPM_CR50) += cr50.c
+bootblock-$(CONFIG_I2C_TPM_CR50) += cr50.c
ramstage-$(CONFIG_DRIVER_I2C_TPM_ACPI) += chip.c
diff --git a/src/drivers/i2c/tpm/cr50.c b/src/drivers/i2c/tpm/cr50.c
new file mode 100644
index 0000000000..419ac1e68f
--- /dev/null
+++ b/src/drivers/i2c/tpm/cr50.c
@@ -0,0 +1,466 @@
+/*
+ * Copyright 2016 Google Inc.
+ *
+ * Based on Linux Kernel TPM driver by
+ * Peter Huewe <peter.huewe@infineon.com>
+ * Copyright (C) 2011 Infineon Technologies
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * cr50 is a TPM 2.0 capable device that requries special
+ * handling for the I2C interface.
+ *
+ * - Use an interrupt for transaction status instead of hardcoded delays
+ * - Must use write+wait+read read protocol
+ * - All 4 bytes of status register must be read/written at once
+ * - Burst count max is 63 bytes, and burst count behaves
+ * slightly differently than other I2C TPMs
+ * - When reading from FIFO the full burstcnt must be read
+ * instead of just reading header and determining the remainder
+ */
+
+#include <arch/early_variables.h>
+#include <commonlib/endian.h>
+#include <stdint.h>
+#include <string.h>
+#include <types.h>
+#include <delay.h>
+#include <console/console.h>
+#include <device/i2c.h>
+#include <endian.h>
+#include <timer.h>
+#include "tpm.h"
+
+#define CR50_MAX_BURSTCOUNT 63
+
+#define SLEEP_DURATION 60 /* in usec */
+#define SLEEP_DURATION_LONG 210 /* in usec */
+#define SLEEP_DURATION_SAFE 750 /* in usec */
+#define SLEEP_DURATION_PROBE_MS 1000 /* in msec */
+
+#define CR50_DID_VID 0x00281ae0L
+
+struct tpm_inf_dev {
+ int bus;
+ unsigned int addr;
+ uint8_t buf[TPM_BUFSIZE + sizeof(uint8_t)];
+};
+
+static struct tpm_inf_dev g_tpm_dev CAR_GLOBAL;
+
+/*
+ * iic_tpm_read() - read from TPM register
+ *
+ * @addr: register address to read from
+ * @buffer: provided by caller
+ * @len: number of bytes to read
+ *
+ * 1) send register address byte 'addr' to the TPM
+ * 2) wait for TPM to indicate it is ready
+ * 3) read 'len' bytes of TPM response into the provided 'buffer'
+ *
+ * Return -1 on error, 0 on success.
+ */
+static int iic_tpm_read(uint8_t addr, uint8_t *buffer, size_t len)
+{
+ struct tpm_inf_dev *tpm_dev = car_get_var_ptr(&g_tpm_dev);
+
+ if (tpm_dev->addr == 0)
+ return -1;
+
+ /* Send the register address byte to the TPM */
+ if (i2c_write_raw(tpm_dev->bus, tpm_dev->addr, &addr, 1)) {
+ printk(BIOS_ERR, "%s: Address write failed\n", __func__);
+ return -1;
+ }
+
+ /* Wait for TPM to be ready with response data */
+ udelay(SLEEP_DURATION_SAFE);
+
+ /* Read response data from the TPM */
+ if (i2c_read_raw(tpm_dev->bus, tpm_dev->addr, buffer, len)) {
+ printk(BIOS_ERR, "%s: Read response failed\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * iic_tpm_write() - write to TPM register
+ *
+ * @addr: register address to write to
+ * @buffer: data to write
+ * @len: number of bytes to write
+ *
+ * 1) prepend the provided address to the provided data
+ * 2) send the address+data to the TPM
+ * 3) wait for TPM to indicate it is done writing
+ *
+ * Returns -1 on error, 0 on success.
+ */
+static int iic_tpm_write(uint8_t addr, uint8_t *buffer, size_t len)
+{
+ struct tpm_inf_dev *tpm_dev = car_get_var_ptr(&g_tpm_dev);
+
+ if (tpm_dev->addr == 0)
+ return -1;
+ if (len > TPM_BUFSIZE)
+ return -1;
+
+ /* Prepend the 'register address' to the buffer */
+ tpm_dev->buf[0] = addr;
+ memcpy(tpm_dev->buf + 1, buffer, len);
+
+ /* Send write request buffer with address */
+ if (i2c_write_raw(tpm_dev->bus, tpm_dev->addr, tpm_dev->buf, len + 1)) {
+ printk(BIOS_ERR, "%s: Error writing to TPM\n", __func__);
+ return -1;
+ }
+
+ /* Wait for TPM to be ready */
+ udelay(SLEEP_DURATION_SAFE);
+
+ return 0;
+}
+
+static int check_locality(struct tpm_chip *chip, int loc)
+{
+ uint8_t buf;
+
+ if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0)
+ return -1;
+
+ if ((buf & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
+ (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) {
+ chip->vendor.locality = loc;
+ return loc;
+ }
+
+ return -1;
+}
+
+static void release_locality(struct tpm_chip *chip, int loc, int force)
+{
+ uint8_t buf;
+ if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0)
+ return;
+
+ if (force || (buf & (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
+ (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) {
+ buf = TPM_ACCESS_ACTIVE_LOCALITY;
+ iic_tpm_write(TPM_ACCESS(loc), &buf, 1);
+ }
+}
+
+static int request_locality(struct tpm_chip *chip, int loc)
+{
+ uint8_t buf = TPM_ACCESS_REQUEST_USE;
+
+ if (check_locality(chip, loc) >= 0)
+ return loc; /* we already have the locality */
+
+ iic_tpm_write(TPM_ACCESS(loc), &buf, 1);
+
+ /* wait for burstcount */
+ int timeout = 2 * 1000; /* 2s timeout */
+ while (timeout) {
+ if (check_locality(chip, loc) >= 0)
+ return loc;
+ mdelay(TPM_TIMEOUT);
+ timeout--;
+ }
+
+ return -1;
+}
+
+/* cr50 requires all 4 bytes of status register to be read */
+static uint8_t cr50_tis_i2c_status(struct tpm_chip *chip)
+{
+ uint8_t buf[4];
+ if (iic_tpm_read(TPM_STS(chip->vendor.locality),
+ buf, sizeof(buf)) < 0) {
+ printk(BIOS_ERR, "%s: Failed to read status\n", __func__);
+ return 0;
+ }
+ return buf[0];
+}
+
+/* cr50 requires all 4 bytes of status register to be written */
+static void cr50_tis_i2c_ready(struct tpm_chip *chip)
+{
+ uint8_t buf[4] = { TPM_STS_COMMAND_READY };
+ iic_tpm_write(TPM_STS(chip->vendor.locality), buf, sizeof(buf));
+}
+
+/* cr50 uses bytes 3:2 of status register for burst count and
+ * all 4 bytes must be read */
+static int cr50_wait_burst_status(struct tpm_chip *chip, uint8_t mask,
+ size_t *burst, int *status)
+{
+ uint8_t buf[4];
+ struct stopwatch sw;
+
+ stopwatch_init_msecs_expire(&sw, 2000);
+
+ while (!stopwatch_expired(&sw)) {
+ if (iic_tpm_read(TPM_STS(chip->vendor.locality),
+ buf, sizeof(buf)) != 0) {
+ printk(BIOS_WARNING, "%s: Read failed\n", __func__);
+ udelay(SLEEP_DURATION_SAFE);
+ continue;
+ }
+
+ *status = buf[0];
+ *burst = read_le16(&buf[1]);
+
+ /* Check if mask matches and burst is valid */
+ if ((*status & mask) == mask &&
+ *burst > 0 && *burst <= CR50_MAX_BURSTCOUNT)
+ return 0;
+
+ udelay(SLEEP_DURATION_SAFE);
+ }
+
+ printk(BIOS_ERR, "%s: Timeout reading burst and status\n", __func__);
+ return -1;
+}
+
+static int cr50_tis_i2c_recv(struct tpm_chip *chip, uint8_t *buf,
+ size_t buf_len)
+{
+ size_t burstcnt, current, len, expected;
+ uint8_t addr = TPM_DATA_FIFO(chip->vendor.locality);
+ int status;
+ int ret = -1;
+
+ if (buf_len < TPM_HEADER_SIZE)
+ goto out;
+
+ if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0)
+ goto out;
+ if (!(status & TPM_STS_DATA_AVAIL)) {
+ printk(BIOS_ERR, "%s: First chunk not available\n", __func__);
+ goto out;
+ }
+
+ /* Read first chunk of burstcnt bytes */
+ if (iic_tpm_read(addr, buf, burstcnt) != 0) {
+ printk(BIOS_ERR, "%s: Read failed\n", __func__);
+ goto out;
+ }
+
+ /* Determine expected data in the return buffer */
+ expected = read_be32(buf + TPM_RSP_SIZE_BYTE);
+ if (expected > buf_len) {
+ printk(BIOS_ERR, "%s: Too much data: %zu > %zu\n",
+ __func__, expected, buf_len);
+ goto out;
+ }
+
+ /* Now read the rest of the data */
+ current = burstcnt;
+ while (current < expected) {
+ /* Read updated burst count and check status */
+ if (cr50_wait_burst_status(chip, TPM_STS_VALID,
+ &burstcnt, &status) < 0)
+ goto out;
+ if (!(status & TPM_STS_DATA_AVAIL)) {
+ printk(BIOS_ERR, "%s: Data not available\n", __func__);
+ goto out;
+ }
+
+ len = min(burstcnt, expected - current);
+ if (iic_tpm_read(addr, buf + current, len) != 0) {
+ printk(BIOS_ERR, "%s: Read failed\n", __func__);
+ goto out;
+ }
+
+ current += len;
+ }
+
+ /* Ensure TPM is done reading data */
+ if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0)
+ goto out;
+ if (status & TPM_STS_DATA_AVAIL) {
+ printk(BIOS_ERR, "%s: Data still available\n", __func__);
+ goto out;
+ }
+
+ ret = current;
+
+out:
+ return ret;
+}
+
+static int cr50_tis_i2c_send(struct tpm_chip *chip, uint8_t *buf, size_t len)
+{
+ int status;
+ size_t burstcnt, limit, sent = 0;
+ uint8_t tpm_go[4] = { TPM_STS_GO };
+ struct stopwatch sw;
+
+ if (len > TPM_BUFSIZE)
+ return -1;
+
+ stopwatch_init_msecs_expire(&sw, 2000);
+
+ /* Wait until TPM is ready for a command */
+ while (!(cr50_tis_i2c_status(chip) & TPM_STS_COMMAND_READY)) {
+ if (stopwatch_expired(&sw)) {
+ printk(BIOS_ERR, "%s: Command ready timeout\n",
+ __func__);
+ return -1;
+ }
+
+ cr50_tis_i2c_ready(chip);
+ udelay(SLEEP_DURATION_SAFE);
+ }
+
+ while (len > 0) {
+ /* Read burst count and check status */
+ if (cr50_wait_burst_status(chip, TPM_STS_VALID,
+ &burstcnt, &status) < 0)
+ goto out;
+ if (sent > 0 && !(status & TPM_STS_DATA_EXPECT)) {
+ printk(BIOS_ERR, "%s: Data not expected\n", __func__);
+ goto out;
+ }
+
+ /* Use burstcnt - 1 to account for the address byte
+ * that is inserted by iic_tpm_write() */
+ limit = min(burstcnt - 1, len);
+ if (iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality),
+ &buf[sent], limit) != 0) {
+ printk(BIOS_ERR, "%s: Write failed\n", __func__);
+ goto out;
+ }
+
+ sent += limit;
+ len -= limit;
+ }
+
+ /* Ensure TPM is not expecting more data */
+ if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0)
+ goto out;
+ if (status & TPM_STS_DATA_EXPECT) {
+ printk(BIOS_ERR, "%s: Data still expected\n", __func__);
+ goto out;
+ }
+
+ /* Start the TPM command */
+ if (iic_tpm_write(TPM_STS(chip->vendor.locality), tpm_go,
+ sizeof(tpm_go)) < 0) {
+ printk(BIOS_ERR, "%s: Start command failed\n", __func__);
+ goto out;
+ }
+ return sent;
+
+out:
+ /* Abort current transaction if still pending */
+ if (cr50_tis_i2c_status(chip) & TPM_STS_COMMAND_READY)
+ cr50_tis_i2c_ready(chip);
+ return -1;
+}
+
+static void cr50_vendor_init(struct tpm_chip *chip)
+{
+ memset(&chip->vendor, 0, sizeof(struct tpm_vendor_specific));
+ chip->vendor.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID;
+ chip->vendor.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID;
+ chip->vendor.req_canceled = TPM_STS_COMMAND_READY;
+ chip->vendor.status = &cr50_tis_i2c_status;
+ chip->vendor.recv = &cr50_tis_i2c_recv;
+ chip->vendor.send = &cr50_tis_i2c_send;
+ chip->vendor.cancel = &cr50_tis_i2c_ready;
+}
+
+int tpm_vendor_probe(unsigned bus, uint32_t addr)
+{
+ struct tpm_inf_dev *tpm_dev = car_get_var_ptr(&g_tpm_dev);
+ struct stopwatch sw;
+ uint8_t buf = 0;
+ int ret;
+ long sw_run_duration = SLEEP_DURATION_PROBE_MS;
+
+ tpm_dev->bus = bus;
+ tpm_dev->addr = addr;
+
+ /* Wait for TPM_ACCESS register ValidSts bit to be set */
+ stopwatch_init_msecs_expire(&sw, sw_run_duration);
+ do {
+ ret = iic_tpm_read(TPM_ACCESS(0), &buf, 1);
+ if (!ret && (buf & TPM_STS_VALID)) {
+ sw_run_duration = stopwatch_duration_msecs(&sw);
+ break;
+ }
+ udelay(SLEEP_DURATION_SAFE);
+ } while (!stopwatch_expired(&sw));
+
+ printk(BIOS_INFO,
+ "%s: ValidSts bit %s(%d) in TPM_ACCESS register after %ld ms\n",
+ __func__, (buf & TPM_STS_VALID) ? "set" : "clear",
+ (buf & TPM_STS_VALID) >> 7, sw_run_duration);
+
+ /* Claim failure if the ValidSts (bit 7) is clear */
+ if (!(buf & TPM_STS_VALID))
+ return -1;
+
+ return 0;
+}
+
+int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
+{
+ struct tpm_inf_dev *tpm_dev = car_get_var_ptr(&g_tpm_dev);
+ uint32_t vendor;
+
+ if (dev_addr == 0) {
+ printk(BIOS_ERR, "%s: missing device address\n", __func__);
+ return -1;
+ }
+
+ tpm_dev->bus = bus;
+ tpm_dev->addr = dev_addr;
+
+ cr50_vendor_init(chip);
+
+ /* Disable interrupts (not supported) */
+ chip->vendor.irq = 0;
+
+ if (request_locality(chip, 0) != 0)
+ return -1;
+
+ /* Read four bytes from DID_VID register */
+ if (iic_tpm_read(TPM_DID_VID(0), (uint8_t *)&vendor, 4) < 0)
+ goto out_err;
+
+ if (vendor != CR50_DID_VID) {
+ printk(BIOS_DEBUG, "Vendor ID 0x%08x not recognized\n", vendor);
+ goto out_err;
+ }
+
+ printk(BIOS_DEBUG, "cr50 TPM %u:%02x (device-id 0x%X)\n",
+ tpm_dev->bus, tpm_dev->addr, vendor >> 16);
+
+ chip->is_open = 1;
+ return 0;
+
+out_err:
+ release_locality(chip, 0, 1);
+ return -1;
+}
+
+void tpm_vendor_cleanup(struct tpm_chip *chip)
+{
+ release_locality(chip, chip->vendor.locality, 1);
+}
diff --git a/src/drivers/i2c/tpm/tpm.c b/src/drivers/i2c/tpm/tpm.c
index 6b96774f60..55c25fefa4 100644
--- a/src/drivers/i2c/tpm/tpm.c
+++ b/src/drivers/i2c/tpm/tpm.c
@@ -45,7 +45,6 @@
#define SLEEP_DURATION 60 /* in usec */
#define SLEEP_DURATION_LONG 210 /* in usec */
-#define SLEEP_DURATION_SAFE 750 /* in usec */
#define SLEEP_DURATION_PROBE_MS 1000 /* in msec */
/* max. number of iterations after I2C NAK for 'long' commands
@@ -58,19 +57,16 @@
/* expected value for DIDVID register */
#define TPM_TIS_I2C_DID_VID_9635 0x000b15d1L
#define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L
-#define TPM_TIS_I2C_DID_VID_CR50 0x00281ae0L
enum i2c_chip_type {
SLB9635,
SLB9645,
- CR50,
UNKNOWN,
};
static const char * const chip_name[] = {
[SLB9635] = "slb9635tt",
[SLB9645] = "slb9645tt",
- [CR50] = "cr50",
[UNKNOWN] = "unknown/fallback to slb9635",
};
@@ -111,7 +107,6 @@ static int iic_tpm_read(uint8_t addr, uint8_t *buffer, size_t len)
switch (tpm_dev->chip_type) {
case SLB9635:
- case CR50:
case UNKNOWN:
/* slb9635 protocol should work in both cases */
for (count = 0; count < MAX_COUNT; count++) {
@@ -474,211 +469,6 @@ out_err:
return -1;
}
-/*
- * cr50 is a TPM 2.0 capable device that requries special
- * handling for the I2C interface.
- *
- * - Timeouts need to be longer
- * - Must use the older SLB9635 style write+wait+read read protocol
- * - All 4 bytes of status register must be read at once
- * - Burst count max is 63 bytes, and burst count behaves
- * slightly differently than other I2C TPMs
- * - When reading from FIFO the full burstcnt must be read
- * instead of just reading header and determining the remainder
- */
-
-/* cr50 max burst count */
-#define CR50_MAX_BURSTCOUNT 63
-
-/* cr50 requires all 4 bytes of status register to be read */
-static uint8_t cr50_tis_i2c_status(struct tpm_chip *chip)
-{
- uint8_t buf[4];
- if (iic_tpm_read(TPM_STS(chip->vendor.locality),
- buf, sizeof(buf)) < 0) {
- printk(BIOS_ERR, "%s: Failed to read status\n", __func__);
- return 0;
- }
- return buf[0];
-}
-
-/* cr50 requires all 4 bytes of status register to be written */
-static void cr50_tis_i2c_ready(struct tpm_chip *chip)
-{
- uint8_t buf[4] = { TPM_STS_COMMAND_READY };
- iic_tpm_write_long(TPM_STS(chip->vendor.locality), buf, sizeof(buf));
-}
-
-/* cr50 uses bytes 3:2 of status register for burst count and
- * all 4 bytes must be read */
-static int cr50_wait_burst_status(struct tpm_chip *chip, uint8_t mask,
- size_t *burst, int *status)
-{
- uint8_t buf[4];
- struct stopwatch sw;
-
- stopwatch_init_msecs_expire(&sw, 2000);
-
- while (!stopwatch_expired(&sw)) {
- if (iic_tpm_read(TPM_STS(chip->vendor.locality),
- buf, sizeof(buf)) != 0) {
- printk(BIOS_WARNING, "%s: Read failed\n", __func__);
- udelay(SLEEP_DURATION_SAFE);
- continue;
- }
-
- *status = buf[0];
- *burst = read_le16(&buf[1]);
-
- /* Check if mask matches and burst is valid */
- if ((*status & mask) == mask &&
- *burst > 0 && *burst <= CR50_MAX_BURSTCOUNT)
- return 0;
-
- udelay(SLEEP_DURATION_SAFE);
- }
-
- printk(BIOS_ERR, "%s: Timeout reading burst and status\n", __func__);
- return -1;
-}
-
-static int cr50_tis_i2c_recv(struct tpm_chip *chip, uint8_t *buf,
- size_t buf_len)
-{
- size_t burstcnt, current, len, expected;
- uint8_t addr = TPM_DATA_FIFO(chip->vendor.locality);
- int status;
- int ret = -1;
-
- if (buf_len < TPM_HEADER_SIZE)
- goto out;
-
- if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0)
- goto out;
- if (!(status & TPM_STS_DATA_AVAIL)) {
- printk(BIOS_ERR, "%s: First chunk not available\n", __func__);
- goto out;
- }
-
- /* Read first chunk of burstcnt bytes */
- if (iic_tpm_read(addr, buf, burstcnt) != 0) {
- printk(BIOS_ERR, "%s: Read failed\n", __func__);
- goto out;
- }
-
- /* Determine expected data in the return buffer */
- expected = read_be32(buf + TPM_RSP_SIZE_BYTE);
- if (expected > buf_len) {
- printk(BIOS_ERR, "%s: Too much data: %zu > %zu\n",
- __func__, expected, buf_len);
- goto out;
- }
-
- /* Now read the rest of the data */
- current = burstcnt;
- while (current < expected) {
- /* Read updated burst count and check status */
- if (cr50_wait_burst_status(chip, TPM_STS_VALID,
- &burstcnt, &status) < 0)
- goto out;
- if (!(status & TPM_STS_DATA_AVAIL)) {
- printk(BIOS_ERR, "%s: Data not available\n", __func__);
- goto out;
- }
-
- len = min(burstcnt, expected - current);
- if (iic_tpm_read(addr, buf + current, len) != 0) {
- printk(BIOS_ERR, "%s: Read failed\n", __func__);
- goto out;
- }
-
- current += len;
- }
-
- /* Ensure TPM is done reading data */
- if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0)
- goto out;
- if (status & TPM_STS_DATA_AVAIL) {
- printk(BIOS_ERR, "%s: Data still available\n", __func__);
- goto out;
- }
-
- ret = current;
-
-out:
- return ret;
-}
-
-static int cr50_tis_i2c_send(struct tpm_chip *chip, uint8_t *buf, size_t len)
-{
- int status;
- size_t burstcnt, limit, sent = 0;
- uint8_t tpm_go[4] = { TPM_STS_GO };
- struct stopwatch sw;
-
- if (len > TPM_BUFSIZE)
- return -1;
-
- stopwatch_init_msecs_expire(&sw, 2000);
-
- /* Wait until TPM is ready for a command */
- while (!(cr50_tis_i2c_status(chip) & TPM_STS_COMMAND_READY)) {
- if (stopwatch_expired(&sw)) {
- printk(BIOS_ERR, "%s: Command ready timeout\n",
- __func__);
- return -1;
- }
-
- cr50_tis_i2c_ready(chip);
- udelay(SLEEP_DURATION_SAFE);
- }
-
- while (len > 0) {
- /* Read burst count and check status */
- if (cr50_wait_burst_status(chip, TPM_STS_VALID,
- &burstcnt, &status) < 0)
- goto out;
- if (sent > 0 && !(status & TPM_STS_DATA_EXPECT)) {
- printk(BIOS_ERR, "%s: Data not expected\n", __func__);
- goto out;
- }
-
- /* Use burstcnt - 1 to account for the address byte
- * that is inserted by iic_tpm_write() */
- limit = min(burstcnt - 1, len);
- if (iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality),
- &buf[sent], limit) != 0) {
- printk(BIOS_ERR, "%s: Write failed\n", __func__);
- goto out;
- }
-
- sent += limit;
- len -= limit;
- }
-
- /* Ensure TPM is not expecting more data */
- if (cr50_wait_burst_status(chip, TPM_STS_VALID, &burstcnt, &status) < 0)
- goto out;
- if (status & TPM_STS_DATA_EXPECT) {
- printk(BIOS_ERR, "%s: Data still expected\n", __func__);
- goto out;
- }
-
- /* Start the TPM command */
- if (iic_tpm_write(TPM_STS(chip->vendor.locality), tpm_go,
- sizeof(tpm_go)) < 0) {
- printk(BIOS_ERR, "%s: Start command failed\n", __func__);
- goto out;
- }
- return sent;
-
-out:
- /* Abort current transaction if still pending */
- if (cr50_tis_i2c_status(chip) & TPM_STS_COMMAND_READY)
- cr50_tis_i2c_ready(chip);
- return -1;
-}
-
/* Initialization of I2C TPM */
int tpm_vendor_probe(unsigned bus, uint32_t addr)
@@ -692,8 +482,8 @@ int tpm_vendor_probe(unsigned bus, uint32_t addr)
tpm_dev->chip_type = UNKNOWN;
tpm_dev->bus = bus;
tpm_dev->addr = addr;
- tpm_dev->sleep_short = SLEEP_DURATION_SAFE;
- tpm_dev->sleep_long = SLEEP_DURATION_SAFE * 2;
+ tpm_dev->sleep_short = SLEEP_DURATION;
+ tpm_dev->sleep_long = SLEEP_DURATION_LONG;
/*
* Probe TPM. Check if the TPM_ACCESS register's ValidSts bit is set(1)
@@ -706,7 +496,7 @@ int tpm_vendor_probe(unsigned bus, uint32_t addr)
sw_run_duration = stopwatch_duration_msecs(&sw);
break;
}
- udelay(SLEEP_DURATION_SAFE);
+ udelay(SLEEP_DURATION);
} while (!stopwatch_expired(&sw));
printk(BIOS_INFO,
@@ -736,10 +526,8 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
tpm_dev->chip_type = UNKNOWN;
tpm_dev->bus = bus;
tpm_dev->addr = dev_addr;
-
- /* Use conservative values to read chip id */
- tpm_dev->sleep_short = SLEEP_DURATION_SAFE;
- tpm_dev->sleep_long = SLEEP_DURATION_SAFE * 2;
+ tpm_dev->sleep_short = SLEEP_DURATION;
+ tpm_dev->sleep_long = SLEEP_DURATION_LONG;
memset(&chip->vendor, 0, sizeof(struct tpm_vendor_specific));
chip->is_open = 1;
@@ -747,6 +535,10 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
chip->vendor.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID;
chip->vendor.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID;
chip->vendor.req_canceled = TPM_STS_COMMAND_READY;
+ chip->vendor.status = &tpm_tis_i2c_status;
+ chip->vendor.recv = &tpm_tis_i2c_recv;
+ chip->vendor.send = &tpm_tis_i2c_send;
+ chip->vendor.cancel = &tpm_tis_i2c_ready;
/* Disable interrupts (not supported) */
chip->vendor.irq = 0;
@@ -762,27 +554,11 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
tpm_dev->chip_type = SLB9645;
} else if (be32_to_cpu(vendor) == TPM_TIS_I2C_DID_VID_9635) {
tpm_dev->chip_type = SLB9635;
- } else if (vendor == TPM_TIS_I2C_DID_VID_CR50) {
- tpm_dev->chip_type = CR50;
} else {
printk(BIOS_DEBUG, "Vendor ID 0x%08x not recognized.\n", vendor);
goto out_err;
}
- if (tpm_dev->chip_type == CR50) {
- chip->vendor.status = &cr50_tis_i2c_status;
- chip->vendor.recv = &cr50_tis_i2c_recv;
- chip->vendor.send = &cr50_tis_i2c_send;
- chip->vendor.cancel = &cr50_tis_i2c_ready;
- } else {
- tpm_dev->sleep_short = SLEEP_DURATION;
- tpm_dev->sleep_long = SLEEP_DURATION_LONG;
- chip->vendor.status = &tpm_tis_i2c_status;
- chip->vendor.recv = &tpm_tis_i2c_recv;
- chip->vendor.send = &tpm_tis_i2c_send;
- chip->vendor.cancel = &tpm_tis_i2c_ready;
- }
-
printk(BIOS_DEBUG, "I2C TPM %u:%02x (chip type %s device-id 0x%X)\n",
tpm_dev->bus, tpm_dev->addr,
chip_name[tpm_dev->chip_type], vendor >> 16);