summaryrefslogtreecommitdiff
path: root/src/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'src/drivers')
-rw-r--r--src/drivers/i2c/tpm/Kconfig12
-rw-r--r--src/drivers/i2c/tpm/cr50.c57
-rw-r--r--src/drivers/i2c/tpm/tpm.h1
3 files changed, 9 insertions, 61 deletions
diff --git a/src/drivers/i2c/tpm/Kconfig b/src/drivers/i2c/tpm/Kconfig
index a5ab0771c4..db77b956b9 100644
--- a/src/drivers/i2c/tpm/Kconfig
+++ b/src/drivers/i2c/tpm/Kconfig
@@ -2,14 +2,9 @@ config I2C_TPM
bool "I2C TPM"
depends on TPM || TPM2
-config MAINBOARD_HAS_I2C_TPM_CR50
- bool
- default n
-
choice
prompt "I2C TPM Driver"
- default I2C_TPM_CR50 if MAINBOARD_HAS_I2C_TPM_CR50
- default I2C_TPM_GENERIC if !MAINBOARD_HAS_I2C_TPM_CR50
+ default I2C_TPM_GENERIC
depends on I2C_TPM
config I2C_TPM_GENERIC
@@ -30,11 +25,6 @@ config DRIVER_TPM_I2C_ADDR
default 2 # FIXME, workaround for Kconfig BS
depends on I2C_TPM
-config DRIVER_TPM_I2C_IRQ
- int "IRQ or GPE to use for TPM interrupt"
- default -1
- depends on I2C_TPM
-
config DRIVER_I2C_TPM_ACPI
bool "Generate I2C TPM ACPI device"
default y if ARCH_X86 && I2C_TPM
diff --git a/src/drivers/i2c/tpm/cr50.c b/src/drivers/i2c/tpm/cr50.c
index d3c0efa2ac..37f0881980 100644
--- a/src/drivers/i2c/tpm/cr50.c
+++ b/src/drivers/i2c/tpm/cr50.c
@@ -41,9 +41,6 @@
#include <timer.h>
#include "tpm.h"
-#if IS_ENABLED(CONFIG_ARCH_X86)
-#include <arch/acpi.h>
-#endif
#define CR50_MAX_BUFSIZE 63
#define CR50_TIMEOUT_LONG_MS 2000 /* Long timeout while waiting for TPM */
@@ -58,26 +55,6 @@ struct tpm_inf_dev {
static struct tpm_inf_dev g_tpm_dev CAR_GLOBAL;
-/* Wait for interrupt to indicate the TPM is ready */
-static int cr50_i2c_wait_tpm_ready(struct tpm_chip *chip)
-{
- struct stopwatch sw;
-
- if (!chip->vendor.irq_status) {
- /* Fixed delay if interrupt not supported */
- mdelay(CR50_TIMEOUT_SHORT_MS);
- return 0;
- }
-
- stopwatch_init_msecs_expire(&sw, 10 * CR50_TIMEOUT_SHORT_MS);
-
- while (!chip->vendor.irq_status(chip->vendor.irq))
- if (stopwatch_expired(&sw))
- return -1;
-
- return 0;
-}
-
/*
* cr50_i2c_read() - read from TPM register
*
@@ -100,10 +77,6 @@ static int cr50_i2c_read(struct tpm_chip *chip, uint8_t addr,
if (tpm_dev->addr == 0)
return -1;
- /* Clear interrupt before starting transaction */
- if (chip->vendor.irq_status)
- chip->vendor.irq_status(chip->vendor.irq);
-
/* Send the register address byte to the TPM */
if (i2c_write_raw(tpm_dev->bus, tpm_dev->addr, &addr, 1)) {
printk(BIOS_ERR, "%s: Address write failed\n", __func__);
@@ -111,8 +84,7 @@ static int cr50_i2c_read(struct tpm_chip *chip, uint8_t addr,
}
/* Wait for TPM to be ready with response data */
- if (cr50_i2c_wait_tpm_ready(chip) < 0)
- return -1;
+ mdelay(CR50_TIMEOUT_SHORT_MS);
/* Read response data from the TPM */
if (i2c_read_raw(tpm_dev->bus, tpm_dev->addr, buffer, len)) {
@@ -151,10 +123,6 @@ static int cr50_i2c_write(struct tpm_chip *chip,
tpm_dev->buf[0] = addr;
memcpy(tpm_dev->buf + 1, buffer, len);
- /* Clear interrupt before starting transaction */
- if (chip->vendor.irq_status)
- chip->vendor.irq_status(chip->vendor.irq);
-
/* Send write request buffer with address */
if (i2c_write_raw(tpm_dev->bus, tpm_dev->addr, tpm_dev->buf, len + 1)) {
printk(BIOS_ERR, "%s: Error writing to TPM\n", __func__);
@@ -162,7 +130,9 @@ static int cr50_i2c_write(struct tpm_chip *chip,
}
/* Wait for TPM to be ready */
- return cr50_i2c_wait_tpm_ready(chip);
+ mdelay(CR50_TIMEOUT_SHORT_MS);
+
+ return 0;
}
static int check_locality(struct tpm_chip *chip, int loc)
@@ -410,7 +380,6 @@ static void cr50_vendor_init(struct tpm_chip *chip)
chip->vendor.recv = &cr50_i2c_tis_recv;
chip->vendor.send = &cr50_i2c_tis_send;
chip->vendor.cancel = &cr50_i2c_tis_ready;
- chip->vendor.irq = CONFIG_DRIVER_TPM_I2C_IRQ;
}
int tpm_vendor_probe(unsigned bus, uint32_t addr)
@@ -465,18 +434,8 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
cr50_vendor_init(chip);
- /*
- * Interrupts are not supported this early in firmware,
- * use use an arch-specific method to query for interrupt status.
- */
- if (chip->vendor.irq > 0) {
- if (IS_ENABLED(CONFIG_ARCH_X86)) {
- /* Query GPE status for interrupt */
- chip->vendor.irq_status = &acpi_get_gpe;
- } else {
- chip->vendor.irq = -1;
- }
- }
+ /* Disable interrupts (not supported) */
+ chip->vendor.irq = 0;
if (request_locality(chip, 0) != 0)
return -1;
@@ -490,8 +449,8 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr)
goto out_err;
}
- printk(BIOS_DEBUG, "cr50 TPM 2.0 (i2c %u:0x%02x irq %d id 0x%x)\n",
- bus, dev_addr, chip->vendor.irq, vendor >> 16);
+ printk(BIOS_DEBUG, "cr50 TPM %u:%02x (device-id 0x%X)\n",
+ tpm_dev->bus, tpm_dev->addr, vendor >> 16);
chip->is_open = 1;
return 0;
diff --git a/src/drivers/i2c/tpm/tpm.h b/src/drivers/i2c/tpm/tpm.h
index b6dda1af47..048c848de2 100644
--- a/src/drivers/i2c/tpm/tpm.h
+++ b/src/drivers/i2c/tpm/tpm.h
@@ -74,7 +74,6 @@ struct tpm_vendor_specific {
uint8_t req_complete_val;
uint8_t req_canceled;
int irq;
- int (*irq_status)(int irq);
int (*recv)(struct tpm_chip *, uint8_t *, size_t);
int (*send)(struct tpm_chip *, uint8_t *, size_t);
void (*cancel)(struct tpm_chip *);