summaryrefslogtreecommitdiff
path: root/src/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'src/drivers')
-rw-r--r--src/drivers/spi/tpm/tpm.c162
-rw-r--r--src/drivers/spi/tpm/tpm.h3
2 files changed, 140 insertions, 25 deletions
diff --git a/src/drivers/spi/tpm/tpm.c b/src/drivers/spi/tpm/tpm.c
index 4263dce523..bc40e852a2 100644
--- a/src/drivers/spi/tpm/tpm.c
+++ b/src/drivers/spi/tpm/tpm.c
@@ -31,6 +31,15 @@
#define TPM_DID_VID_REG (TPM_LOCALITY_0_SPI_BASE + 0xf00)
#define TPM_RID_REG (TPM_LOCALITY_0_SPI_BASE + 0xf04)
#define TPM_FW_VER (TPM_LOCALITY_0_SPI_BASE + 0xf90)
+#define CR50_BOARD_CFG (TPM_LOCALITY_0_SPI_BASE + 0xfe0)
+
+#define CR50_BOARD_CFG_LOCKBIT_MASK 0x80000000U
+#define CR50_BOARD_CFG_FEATUREBITS_MASK 0x3FFFFFFFU
+
+#define CR50_BOARD_CFG_100US_READY_PULSE 0x00000001U
+#define CR50_BOARD_CFG_VALUE \
+ (CONFIG(CR50_USE_LONG_INTERRUPT_PULSES) \
+ ? CR50_BOARD_CFG_100US_READY_PULSE : 0)
#define CR50_TIMEOUT_INIT_MS 30000 /* Very long timeout for TPM init */
@@ -39,6 +48,12 @@ static struct spi_slave spi_slave;
/* Cached TPM device identification. */
static struct tpm2_info tpm_info;
+struct cr50_firmware_version {
+ int epoch;
+ int major;
+ int minor;
+};
+static struct cr50_firmware_version cr50_firmware_version;
/*
* TODO(vbendeb): make CONFIG(DEBUG_TPM) an int to allow different level of
@@ -421,12 +436,109 @@ static int tpm2_claim_locality(void)
return 0;
}
+static int cr50_parse_fw_version(const char *version_str, struct cr50_firmware_version *ver)
+{
+ int epoch, major, minor;
+
+ char *number = strstr(version_str, " RW_A:");
+ if (!number)
+ number = strstr(version_str, " RW_B:");
+ if (!number)
+ return -1;
+ number += 6; /* Skip past the colon. */
+
+ epoch = skip_atoi(&number);
+ if (*number++ != '.')
+ return -2;
+ major = skip_atoi(&number);
+ if (*number++ != '.')
+ return -2;
+ minor = skip_atoi(&number);
+
+ ver->epoch = epoch;
+ ver->major = major;
+ ver->minor = minor;
+ return 0;
+}
+
+static int cr50_fw_supports_board_cfg(struct cr50_firmware_version *version)
+{
+ /* Cr50 supports the CR50_BOARD_CFG register from version 0.5.5 / 0.6.5
+ * and onwards. */
+ if (version->epoch > 0 || version->major >= 7
+ || (version->major >= 5 && version->minor >= 5))
+ return 1;
+ printk(BIOS_INFO, "Cr50 firmware does not support CR50_BOARD_CFG, version: %d.%d.%d\n",
+ version->epoch, version->major, version->minor);
+ return 0;
+}
+
+/**
+ * Set the BOARD_CFG register on the TPM chip to a particular compile-time constant value.
+ */
+static void cr50_set_board_cfg(void)
+{
+ uint32_t board_cfg_value;
+ if (!cr50_fw_supports_board_cfg(&cr50_firmware_version))
+ return;
+ /* Set the CR50_BOARD_CFG register, for e.g. asking cr50 to use longer ready pulses. */
+ if (!tpm2_read_reg(CR50_BOARD_CFG, &board_cfg_value, sizeof(board_cfg_value))) {
+ printk(BIOS_INFO, "Error reading from cr50\n");
+ return;
+ }
+ if ((board_cfg_value & CR50_BOARD_CFG_FEATUREBITS_MASK) == CR50_BOARD_CFG_VALUE) {
+ printk(BIOS_INFO,
+ "Current CR50_BOARD_CFG = 0x%08x, matches desired = 0x%08x\n",
+ board_cfg_value, CR50_BOARD_CFG_VALUE);
+ return;
+ }
+ if (board_cfg_value & CR50_BOARD_CFG_LOCKBIT_MASK) {
+ /* The high bit is set, meaning that the Cr50 is already locked on a particular
+ * value for the register, but not the one we wanted. */
+ printk(BIOS_ERR,
+ "ERROR: Current CR50_BOARD_CFG = 0x%08x, does not match desired = 0x%08x\n",
+ board_cfg_value, CR50_BOARD_CFG_VALUE);
+ return;
+ }
+ printk(BIOS_INFO, "Current CR50_BOARD_CFG = 0x%08x, setting to 0x%08x\n",
+ board_cfg_value, CR50_BOARD_CFG_VALUE);
+ board_cfg_value = CR50_BOARD_CFG_VALUE;
+ if (!tpm2_write_reg(CR50_BOARD_CFG, &board_cfg_value, sizeof(board_cfg_value)))
+ printk(BIOS_INFO, "Error writing to cr50\n");
+}
+
+/*
+ * Expose method to read the CR50_BOARD_CFG register, will return zero if
+ * register not supported by Cr50 firmware.
+ */
+static uint32_t cr50_get_board_cfg(void)
+{
+ uint32_t board_cfg_value;
+ if (!cr50_fw_supports_board_cfg(&cr50_firmware_version))
+ return 0;
+ if (!tpm2_read_reg(CR50_BOARD_CFG, &board_cfg_value, sizeof(board_cfg_value))) {
+ printk(BIOS_INFO, "Error reading from cr50\n");
+ return 0;
+ }
+ return board_cfg_value & CR50_BOARD_CFG_FEATUREBITS_MASK;
+}
+
+bool cr50_is_long_interrupt_pulse_enabled(void)
+{
+ return cr50_get_board_cfg() & CR50_BOARD_CFG_100US_READY_PULSE;
+}
+
/* Device/vendor ID values of the TPM devices this driver supports. */
static const uint32_t supported_did_vids[] = {
0x00281ae0, /* H1 based Cr50 security chip. */
0x0000104a /* ST33HTPH2E32 */
};
+static int first_access_this_boot(void)
+{
+ return ENV_SEPARATE_VERSTAGE || ENV_BOOTBLOCK || !CONFIG(VBOOT);
+}
+
int tpm2_init(struct spi_slave *spi_if)
{
uint32_t did_vid, status;
@@ -471,7 +583,7 @@ int tpm2_init(struct spi_slave *spi_if)
printk(BIOS_INFO, " done!\n");
// FIXME: Move this to tpm_setup()
- if (ENV_SEPARATE_VERSTAGE || ENV_BOOTBLOCK || !CONFIG(VBOOT))
+ if (first_access_this_boot())
/*
* Claim locality 0, do it only during the first
* initialization after reset.
@@ -502,18 +614,10 @@ int tpm2_init(struct spi_slave *spi_if)
tpm_info.vendor_id, tpm_info.device_id, tpm_info.revision);
/* Let's report device FW version if available. */
- if (tpm_info.vendor_id == 0x1ae0) {
+ if (CONFIG(TPM_CR50) && tpm_info.vendor_id == 0x1ae0) {
int chunk_count = 0;
- size_t chunk_size;
- /*
- * let's read 50 bytes at a time; leave room for the trailing
- * zero.
- */
- char vstr[51];
-
- chunk_size = sizeof(vstr) - 1;
-
- printk(BIOS_INFO, "Firmware version: ");
+ size_t chunk_size = 50;
+ char version_str[301];
/*
* Does not really matter what's written, this just makes sure
@@ -521,20 +625,28 @@ int tpm2_init(struct spi_slave *spi_if)
*/
tpm2_write_reg(TPM_FW_VER, &chunk_size, 1);
- /* Print it out in sizeof(vstr) - 1 byte chunks. */
- vstr[chunk_size] = 0;
+ /*
+ * Read chunk_size bytes at a time, last chunk will be zero padded.
+ */
do {
- tpm2_read_reg(TPM_FW_VER, vstr, chunk_size);
- printk(BIOS_INFO, "%s", vstr);
-
- /*
- * While string is not over, and is no longer than 300
- * characters.
- */
- } while (vstr[chunk_size - 1] &&
- (chunk_count++ < (300 / chunk_size)));
-
- printk(BIOS_INFO, "\n");
+ tpm2_read_reg(TPM_FW_VER,
+ version_str + chunk_count * chunk_size,
+ chunk_size);
+ if (!version_str[++chunk_count * chunk_size - 1])
+ /* Zero padding detected: end of string. */
+ break;
+ /* Check if there is enough room for reading one more chunk. */
+ } while (chunk_count * chunk_size < sizeof(version_str) - chunk_size);
+ version_str[chunk_count * chunk_size] = '\0';
+ printk(BIOS_INFO, "Firmware version: %s\n", version_str);
+ if (cr50_parse_fw_version(version_str, &cr50_firmware_version)) {
+ printk(BIOS_ERR, "Did not recognize Cr50 version format\n");
+ return -1;
+ }
+ if (CR50_BOARD_CFG_VALUE) {
+ if (first_access_this_boot())
+ cr50_set_board_cfg();
+ }
}
return 0;
}
diff --git a/src/drivers/spi/tpm/tpm.h b/src/drivers/spi/tpm/tpm.h
index be98ed05df..b3e3f45ee9 100644
--- a/src/drivers/spi/tpm/tpm.h
+++ b/src/drivers/spi/tpm/tpm.h
@@ -41,4 +41,7 @@ size_t tpm2_process_command(const void *tpm2_command, size_t command_size,
/* Get information about previously initialized TPM device. */
void tpm2_get_info(struct tpm2_info *info);
+/* Indicates whether Cr50 ready pulses are guaranteed to be at least 100us. */
+bool cr50_is_long_interrupt_pulse_enabled(void);
+
#endif /* ! __COREBOOT_SRC_DRIVERS_SPI_TPM_TPM_H */