summaryrefslogtreecommitdiff
path: root/src/ec
diff options
context:
space:
mode:
Diffstat (limited to 'src/ec')
-rw-r--r--src/ec/google/chromeec/ec_commands.h500
1 files changed, 404 insertions, 96 deletions
diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h
index acee2f58e6..86bd4f69ad 100644
--- a/src/ec/google/chromeec/ec_commands.h
+++ b/src/ec/google/chromeec/ec_commands.h
@@ -559,8 +559,7 @@ extern "C" {
(EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING)
/*
- * Host command response codes (16-bit). Note that response codes should be
- * stored in a uint16_t rather than directly in a value of this type.
+ * Host command response codes (16-bit).
*/
enum ec_status {
EC_RES_SUCCESS = 0,
@@ -584,7 +583,10 @@ enum ec_status {
EC_RES_INVALID_HEADER_CRC = 18, /* Header CRC invalid */
EC_RES_INVALID_DATA_CRC = 19, /* Data CRC invalid */
EC_RES_DUP_UNAVAILABLE = 20, /* Can't resend response */
-};
+
+ EC_RES_MAX = UINT16_MAX /**< Force enum to be 16 bits */
+} __packed;
+BUILD_ASSERT(sizeof(enum ec_status) == sizeof(uint16_t));
/*
* Host event codes. Note these are 1-based, not 0-based, because ACPI query
@@ -664,6 +666,9 @@ enum host_event_code {
/* Keyboard recovery combo with hardware reinitialization */
EC_HOST_EVENT_KEYBOARD_RECOVERY_HW_REINIT = 30,
+ /* WoV */
+ EC_HOST_EVENT_WOV = 31,
+
/*
* The high bit of the event mask is not used as a host event code. If
* it reads back as set, then the entire event mask should be
@@ -1385,8 +1390,6 @@ enum ec_feature_code {
* MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE.
*/
EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS = 37,
- /* EC supports audio codec. */
- EC_FEATURE_AUDIO_CODEC = 38,
/* The MCU is a System Companion Processor (SCP). */
EC_FEATURE_SCP = 39,
/* The MCU is an Integrated Sensor Hub */
@@ -2795,6 +2798,11 @@ struct ec_params_motion_sense {
};
} __ec_todo_packed;
+enum motion_sense_cmd_info_flags {
+ /* The sensor supports online calibration */
+ MOTION_SENSE_CMD_INFO_FLAG_ONLINE_CALIB = BIT(0),
+};
+
struct ec_response_motion_sense {
union {
/* Used for MOTIONSENSE_CMD_DUMP */
@@ -2845,6 +2853,33 @@ struct ec_response_motion_sense {
uint32_t fifo_max_event_count;
} info_3;
+ /* Used for MOTIONSENSE_CMD_INFO version 4 */
+ struct __ec_align4 {
+ /* Should be element of enum motionsensor_type. */
+ uint8_t type;
+
+ /* Should be element of enum motionsensor_location. */
+ uint8_t location;
+
+ /* Should be element of enum motionsensor_chip. */
+ uint8_t chip;
+
+ /* Minimum sensor sampling frequency */
+ uint32_t min_frequency;
+
+ /* Maximum sensor sampling frequency */
+ uint32_t max_frequency;
+
+ /* Max number of sensor events that could be in fifo */
+ uint32_t fifo_max_event_count;
+
+ /*
+ * Should be elements of
+ * enum motion_sense_cmd_info_flags
+ */
+ uint32_t flags;
+ } info_4;
+
/* Used for MOTIONSENSE_CMD_DATA */
struct ec_response_motion_sensor_data data;
@@ -4093,16 +4128,69 @@ struct ec_response_ldo_get {
/*
* Get power info.
+ *
+ * Note: v0 of this command is deprecated
*/
#define EC_CMD_POWER_INFO 0x009D
-struct ec_response_power_info {
- uint32_t usb_dev_type;
- uint16_t voltage_ac;
- uint16_t voltage_system;
- uint16_t current_system;
- uint16_t usb_current_limit;
-} __ec_align4;
+/*
+ * v1 of EC_CMD_POWER_INFO
+ */
+enum system_power_source {
+ /*
+ * Haven't established which power source is used yet,
+ * or no presence signals are available
+ */
+ POWER_SOURCE_UNKNOWN = 0,
+ /* System is running on battery alone */
+ POWER_SOURCE_BATTERY = 1,
+ /* System is running on A/C alone */
+ POWER_SOURCE_AC = 2,
+ /* System is running on A/C and battery */
+ POWER_SOURCE_AC_BATTERY = 3,
+};
+
+struct ec_response_power_info_v1 {
+ /* enum system_power_source */
+ uint8_t system_power_source;
+ /* Battery state-of-charge, 0-100, 0 if not present */
+ uint8_t battery_soc;
+ /* AC Adapter 100% rating, Watts */
+ uint8_t ac_adapter_100pct;
+ /* AC Adapter 10ms rating, Watts */
+ uint8_t ac_adapter_10ms;
+ /* Battery 1C rating, derated */
+ uint8_t battery_1cd;
+ /* Rest of Platform average, Watts */
+ uint8_t rop_avg;
+ /* Rest of Platform peak, Watts */
+ uint8_t rop_peak;
+ /* Nominal charger efficiency, % */
+ uint8_t nominal_charger_eff;
+ /* Rest of Platform VR Average Efficiency, % */
+ uint8_t rop_avg_eff;
+ /* Rest of Platform VR Peak Efficiency, % */
+ uint8_t rop_peak_eff;
+ /* SoC VR Efficiency at Average level, % */
+ uint8_t soc_avg_eff;
+ /* SoC VR Efficiency at Peak level, % */
+ uint8_t soc_peak_eff;
+ /* Intel-specific items */
+ struct {
+ /* Battery's level of DBPT support: 0, 2 */
+ uint8_t batt_dbpt_support_level;
+ /*
+ * Maximum peak power from battery (10ms), Watts
+ * If DBPT is not supported, this is 0
+ */
+ uint8_t batt_dbpt_max_peak_power;
+ /*
+ * Sustained peak power from battery, Watts
+ * If DBPT is not supported, this is 0
+ */
+ uint8_t batt_dbpt_sus_peak_power;
+ } intel;
+} __ec_align1;
/*****************************************************************************/
/* I2C passthru command */
@@ -4574,6 +4662,9 @@ struct ec_response_sb_fw_update {
* Entering Verified Boot Mode Command
* Default mode is VBOOT_MODE_NORMAL if EC did not receive this command.
* Valid Modes are: normal, developer, and recovery.
+ *
+ * EC no longer needs to know what mode vboot has entered,
+ * so this command is deprecated. (See chromium:1014379.)
*/
#define EC_CMD_ENTERING_MODE 0x00B6
@@ -4684,92 +4775,246 @@ enum mkbp_cec_event {
/*****************************************************************************/
-/* Commands for I2S recording on audio codec. */
+/* Commands for audio codec. */
+#define EC_CMD_EC_CODEC 0x00BC
-#define EC_CMD_CODEC_I2S 0x00BC
-#define EC_WOV_I2S_SAMPLE_RATE 48000
+enum ec_codec_subcmd {
+ EC_CODEC_GET_CAPABILITIES = 0x0,
+ EC_CODEC_GET_SHM_ADDR = 0x1,
+ EC_CODEC_SET_SHM_ADDR = 0x2,
+ EC_CODEC_SUBCMD_COUNT,
+};
-enum ec_codec_i2s_subcmd {
- EC_CODEC_SET_SAMPLE_DEPTH = 0x0,
- EC_CODEC_SET_GAIN = 0x1,
- EC_CODEC_GET_GAIN = 0x2,
- EC_CODEC_I2S_ENABLE = 0x3,
- EC_CODEC_I2S_SET_CONFIG = 0x4,
- EC_CODEC_I2S_SET_TDM_CONFIG = 0x5,
- EC_CODEC_I2S_SET_BCLK = 0x6,
- EC_CODEC_I2S_SUBCMD_COUNT = 0x7,
+enum ec_codec_cap {
+ EC_CODEC_CAP_WOV_AUDIO_SHM = 0,
+ EC_CODEC_CAP_WOV_LANG_SHM = 1,
+ EC_CODEC_CAP_LAST = 32,
};
-enum ec_sample_depth_value {
- EC_CODEC_SAMPLE_DEPTH_16 = 0,
- EC_CODEC_SAMPLE_DEPTH_24 = 1,
+enum ec_codec_shm_id {
+ EC_CODEC_SHM_ID_WOV_AUDIO = 0x0,
+ EC_CODEC_SHM_ID_WOV_LANG = 0x1,
+ EC_CODEC_SHM_ID_LAST,
};
-enum ec_i2s_config {
- EC_DAI_FMT_I2S = 0,
- EC_DAI_FMT_RIGHT_J = 1,
- EC_DAI_FMT_LEFT_J = 2,
- EC_DAI_FMT_PCM_A = 3,
- EC_DAI_FMT_PCM_B = 4,
- EC_DAI_FMT_PCM_TDM = 5,
+enum ec_codec_shm_type {
+ EC_CODEC_SHM_TYPE_EC_RAM = 0x0,
+ EC_CODEC_SHM_TYPE_SYSTEM_RAM = 0x1,
};
-/*
- * For subcommand EC_CODEC_GET_GAIN.
- */
-struct __ec_align1 ec_codec_i2s_gain {
+struct __ec_align1 ec_param_ec_codec_get_shm_addr {
+ uint8_t shm_id;
+ uint8_t reserved[3];
+};
+
+struct __ec_align4 ec_param_ec_codec_set_shm_addr {
+ uint64_t phys_addr;
+ uint32_t len;
+ uint8_t shm_id;
+ uint8_t reserved[3];
+};
+
+struct __ec_align4 ec_param_ec_codec {
+ uint8_t cmd; /* enum ec_codec_subcmd */
+ uint8_t reserved[3];
+
+ union {
+ struct ec_param_ec_codec_get_shm_addr
+ get_shm_addr_param;
+ struct ec_param_ec_codec_set_shm_addr
+ set_shm_addr_param;
+ };
+};
+
+struct __ec_align4 ec_response_ec_codec_get_capabilities {
+ uint32_t capabilities;
+};
+
+struct __ec_align4 ec_response_ec_codec_get_shm_addr {
+ uint64_t phys_addr;
+ uint32_t len;
+ uint8_t type;
+ uint8_t reserved[3];
+};
+
+/*****************************************************************************/
+
+/* Commands for DMIC on audio codec. */
+#define EC_CMD_EC_CODEC_DMIC 0x00BD
+
+enum ec_codec_dmic_subcmd {
+ EC_CODEC_DMIC_GET_MAX_GAIN = 0x0,
+ EC_CODEC_DMIC_SET_GAIN_IDX = 0x1,
+ EC_CODEC_DMIC_GET_GAIN_IDX = 0x2,
+ EC_CODEC_DMIC_SUBCMD_COUNT,
+};
+
+enum ec_codec_dmic_channel {
+ EC_CODEC_DMIC_CHANNEL_0 = 0x0,
+ EC_CODEC_DMIC_CHANNEL_1 = 0x1,
+ EC_CODEC_DMIC_CHANNEL_2 = 0x2,
+ EC_CODEC_DMIC_CHANNEL_3 = 0x3,
+ EC_CODEC_DMIC_CHANNEL_4 = 0x4,
+ EC_CODEC_DMIC_CHANNEL_5 = 0x5,
+ EC_CODEC_DMIC_CHANNEL_6 = 0x6,
+ EC_CODEC_DMIC_CHANNEL_7 = 0x7,
+ EC_CODEC_DMIC_CHANNEL_COUNT,
+};
+
+struct __ec_align1 ec_param_ec_codec_dmic_set_gain_idx {
+ uint8_t channel; /* enum ec_codec_dmic_channel */
+ uint8_t gain;
+ uint8_t reserved[2];
+};
+
+struct __ec_align1 ec_param_ec_codec_dmic_get_gain_idx {
+ uint8_t channel; /* enum ec_codec_dmic_channel */
+ uint8_t reserved[3];
+};
+
+struct __ec_align4 ec_param_ec_codec_dmic {
+ uint8_t cmd; /* enum ec_codec_dmic_subcmd */
+ uint8_t reserved[3];
+
+ union {
+ struct ec_param_ec_codec_dmic_set_gain_idx
+ set_gain_idx_param;
+ struct ec_param_ec_codec_dmic_get_gain_idx
+ get_gain_idx_param;
+ };
+};
+
+struct __ec_align1 ec_response_ec_codec_dmic_get_max_gain {
+ uint8_t max_gain;
+};
+
+struct __ec_align1 ec_response_ec_codec_dmic_get_gain_idx {
+ uint8_t gain;
+};
+
+/*****************************************************************************/
+
+/* Commands for I2S RX on audio codec. */
+
+#define EC_CMD_EC_CODEC_I2S_RX 0x00BE
+
+enum ec_codec_i2s_rx_subcmd {
+ EC_CODEC_I2S_RX_ENABLE = 0x0,
+ EC_CODEC_I2S_RX_DISABLE = 0x1,
+ EC_CODEC_I2S_RX_SET_SAMPLE_DEPTH = 0x2,
+ EC_CODEC_I2S_RX_SET_DAIFMT = 0x3,
+ EC_CODEC_I2S_RX_SET_BCLK = 0x4,
+ EC_CODEC_I2S_RX_SUBCMD_COUNT,
+};
+
+enum ec_codec_i2s_rx_sample_depth {
+ EC_CODEC_I2S_RX_SAMPLE_DEPTH_16 = 0x0,
+ EC_CODEC_I2S_RX_SAMPLE_DEPTH_24 = 0x1,
+ EC_CODEC_I2S_RX_SAMPLE_DEPTH_COUNT,
+};
+
+enum ec_codec_i2s_rx_daifmt {
+ EC_CODEC_I2S_RX_DAIFMT_I2S = 0x0,
+ EC_CODEC_I2S_RX_DAIFMT_RIGHT_J = 0x1,
+ EC_CODEC_I2S_RX_DAIFMT_LEFT_J = 0x2,
+ EC_CODEC_I2S_RX_DAIFMT_COUNT,
+};
+
+struct __ec_align1 ec_param_ec_codec_i2s_rx_set_sample_depth {
+ uint8_t depth;
+ uint8_t reserved[3];
+};
+
+struct __ec_align1 ec_param_ec_codec_i2s_rx_set_gain {
uint8_t left;
uint8_t right;
+ uint8_t reserved[2];
};
-struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
- int16_t ch0_delay; /* 0 to 496 */
- int16_t ch1_delay; /* -1 to 496 */
- uint8_t adjacent_to_ch0;
- uint8_t adjacent_to_ch1;
+struct __ec_align1 ec_param_ec_codec_i2s_rx_set_daifmt {
+ uint8_t daifmt;
+ uint8_t reserved[3];
};
-struct __ec_todo_packed ec_param_codec_i2s {
- /* enum ec_codec_i2s_subcmd */
- uint8_t cmd;
+struct __ec_align4 ec_param_ec_codec_i2s_rx_set_bclk {
+ uint32_t bclk;
+};
+
+struct __ec_align4 ec_param_ec_codec_i2s_rx {
+ uint8_t cmd; /* enum ec_codec_i2s_rx_subcmd */
+ uint8_t reserved[3];
+
union {
- /*
- * EC_CODEC_SET_SAMPLE_DEPTH
- * Value should be one of ec_sample_depth_value.
- */
- uint8_t depth;
+ struct ec_param_ec_codec_i2s_rx_set_sample_depth
+ set_sample_depth_param;
+ struct ec_param_ec_codec_i2s_rx_set_daifmt
+ set_daifmt_param;
+ struct ec_param_ec_codec_i2s_rx_set_bclk
+ set_bclk_param;
+ };
+};
- /*
- * EC_CODEC_SET_GAIN
- * Value should be 0~43 for both channels.
- */
- struct ec_codec_i2s_gain gain;
+/*****************************************************************************/
+/* Commands for WoV on audio codec. */
+
+#define EC_CMD_EC_CODEC_WOV 0x00BF
+
+enum ec_codec_wov_subcmd {
+ EC_CODEC_WOV_SET_LANG = 0x0,
+ EC_CODEC_WOV_SET_LANG_SHM = 0x1,
+ EC_CODEC_WOV_GET_LANG = 0x2,
+ EC_CODEC_WOV_ENABLE = 0x3,
+ EC_CODEC_WOV_DISABLE = 0x4,
+ EC_CODEC_WOV_READ_AUDIO = 0x5,
+ EC_CODEC_WOV_READ_AUDIO_SHM = 0x6,
+ EC_CODEC_WOV_SUBCMD_COUNT,
+};
- /*
- * EC_CODEC_I2S_ENABLE
- * 1 to enable, 0 to disable.
- */
- uint8_t i2s_enable;
+/*
+ * @hash is SHA256 of the whole language model.
+ * @total_len indicates the length of whole language model.
+ * @offset is the cursor from the beginning of the model.
+ * @buf is the packet buffer.
+ * @len denotes how many bytes in the buf.
+ */
+struct __ec_align4 ec_param_ec_codec_wov_set_lang {
+ uint8_t hash[32];
+ uint32_t total_len;
+ uint32_t offset;
+ uint8_t buf[128];
+ uint32_t len;
+};
- /*
- * EC_CODEC_I2S_SET_CONFIG
- * Value should be one of ec_i2s_config.
- */
- uint8_t i2s_config;
+struct __ec_align4 ec_param_ec_codec_wov_set_lang_shm {
+ uint8_t hash[32];
+ uint32_t total_len;
+};
- /*
- * EC_CODEC_I2S_SET_TDM_CONFIG
- * Value should be one of ec_i2s_config.
- */
- struct ec_param_codec_i2s_tdm tdm_param;
+struct __ec_align4 ec_param_ec_codec_wov {
+ uint8_t cmd; /* enum ec_codec_wov_subcmd */
+ uint8_t reserved[3];
- /*
- * EC_CODEC_I2S_SET_BCLK
- */
- uint32_t bclk;
+ union {
+ struct ec_param_ec_codec_wov_set_lang
+ set_lang_param;
+ struct ec_param_ec_codec_wov_set_lang_shm
+ set_lang_shm_param;
};
};
+struct __ec_align4 ec_response_ec_codec_wov_get_lang {
+ uint8_t hash[32];
+};
+
+struct __ec_align4 ec_response_ec_codec_wov_read_audio {
+ uint8_t buf[128];
+ uint32_t len;
+};
+
+struct __ec_align4 ec_response_ec_codec_wov_read_audio_shm {
+ uint32_t offset;
+ uint32_t len;
+};
/*****************************************************************************/
/* System commands */
@@ -4954,7 +5199,7 @@ struct ec_params_usb_pd_control {
#define PD_CTRL_RESP_ROLE_DR_POWER BIT(3) /* Partner is dualrole power */
#define PD_CTRL_RESP_ROLE_DR_DATA BIT(4) /* Partner is dualrole data */
#define PD_CTRL_RESP_ROLE_USB_COMM BIT(5) /* Partner USB comm capable */
-#define PD_CTRL_RESP_ROLE_EXT_POWERED BIT(6) /* Partner externally powerd */
+#define PD_CTRL_RESP_ROLE_UNCONSTRAINED BIT(6) /* Partner unconstrained power */
struct ec_response_usb_pd_control {
uint8_t enabled;
@@ -4970,26 +5215,48 @@ struct ec_response_usb_pd_control_v1 {
char state[32];
} __ec_align1;
-/* Values representing usbc PD CC state */
-#define USBC_PD_CC_NONE 0 /* No accessory connected */
-#define USBC_PD_CC_NO_UFP 1 /* No UFP accessory connected */
-#define USBC_PD_CC_AUDIO_ACC 2 /* Audio accessory connected */
-#define USBC_PD_CC_DEBUG_ACC 3 /* Debug accessory connected */
-#define USBC_PD_CC_UFP_ATTACHED 4 /* UFP attached to usbc */
-#define USBC_PD_CC_DFP_ATTACHED 5 /* DPF attached to usbc */
+/* Possible port partner connections based on CC line states */
+enum pd_cc_states {
+ PD_CC_NONE = 0, /* No port partner attached */
+
+ /* From DFP perspective */
+ PD_CC_UFP_AUDIO_ACC = 2, /* UFP Audio accessory connected */
+ PD_CC_UFP_DEBUG_ACC = 3, /* UFP Debug accessory connected */
+ PD_CC_UFP_ATTACHED = 4, /* Plain UFP attached */
+
+ /* From UFP perspective */
+ PD_CC_DFP_DEBUG_ACC = 6, /* DFP debug accessory connected */
+ PD_CC_DFP_ATTACHED = 5, /* Plain DFP attached */
+};
#define USBC_CABLE_TYPE_UNDEF 0 /* Undefined */
#define USBC_CABLE_TYPE_PASSIVE 3 /* Passive cable attached */
#define USBC_CABLE_TYPE_ACTIVE 4 /* Active cable attached */
+/* Active/Passive Cable */
+#define USB_PD_MUX_TBT_ACTIVE_CABLE BIT(0)
+/* Optical/Non-optical cable */
+#define USB_PD_MUX_TBT_CABLE_TYPE BIT(1)
+/* 3rd Gen TBT device (or AMA)/2nd gen tbt Adapter */
+#define USB_PD_MUX_TBT_ADAPTER BIT(2)
+/* Active Link enabled/disabled */
+#define USB_PD_MUX_TBT_LINK BIT(3)
+
+/*
+ * Underdevelopement :
+ * Please remove this tag if using _v2 outside platform/ec
+ */
struct ec_response_usb_pd_control_v2 {
uint8_t enabled;
uint8_t role;
uint8_t polarity;
char state[32];
- uint8_t cc_state; /* USBC_PD_CC_*Encoded cc state */
- uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */
- uint8_t cable_type; /* USBC_CABLE_TYPE_*cable_type */
+ uint8_t cc_state; /* enum pd_cc_states representing cc state */
+ uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */
+ uint8_t cable_type; /* USBC_CABLE_TYPE_*cable_type */
+ uint8_t control_flags; /* USB_PD_MUX_*flags */
+ uint8_t cable_speed;
+ uint8_t cable_gen; /* rounded_support */
} __ec_align1;
#define EC_CMD_USB_PD_PORTS 0x0102
@@ -5110,7 +5377,7 @@ struct ec_params_usb_pd_discovery_entry {
enum usb_pd_override_ports {
OVERRIDE_DONT_CHARGE = -2,
OVERRIDE_OFF = -1,
- /* [0, CONFIG_USB_PD_PORT_COUNT): Port# */
+ /* [0, CONFIG_USB_PD_PORT_MAX_COUNT): Port# */
};
struct ec_params_charge_port_override {
@@ -5271,12 +5538,14 @@ struct ec_params_usb_pd_mux_info {
} __ec_align1;
/* Flags representing mux state */
-#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */
-#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */
-#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */
-#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */
-#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */
-#define USB_PD_MUX_SAFE_MODE BIT(5) /* DP is in safe mode */
+#define USB_PD_MUX_NONE 0 /* Open switch */
+#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */
+#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */
+#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */
+#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */
+#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */
+#define USB_PD_MUX_SAFE_MODE BIT(5) /* DP is in safe mode */
+#define USB_PD_MUX_TBT_COMPAT_ENABLED BIT(6) /* TBT compat enabled */
struct ec_response_usb_pd_mux_info {
uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
@@ -5363,6 +5632,7 @@ enum cbi_data_tag {
CBI_TAG_DRAM_PART_NUM = 3, /* variable length ascii, nul terminated. */
CBI_TAG_OEM_NAME = 4, /* variable length ascii, nul terminated. */
CBI_TAG_MODEL_ID = 5, /* uint32_t or smaller */
+ CBI_TAG_FW_CONFIG = 6, /* uint32_t bit field */
CBI_TAG_COUNT,
};
@@ -5570,6 +5840,18 @@ struct ec_response_locate_chip {
};
} __ec_align2;
+/*
+ * Reboot AP on G3
+ *
+ * This command is used for validation purpose, where the AP needs to be
+ * returned back to S0 state from G3 state without using the servo to trigger
+ * wake events.For this,there is no request or response struct.
+ *
+ * Order of command usage:
+ * ectool reboot_ap_on_g3 && shutdown -h now
+ */
+#define EC_CMD_REBOOT_AP_ON_G3 0x0127
+
/*****************************************************************************/
/* The command range 0x200-0x2FF is reserved for Rotor. */
@@ -5725,15 +6007,18 @@ struct ec_response_fp_info {
#define FP_FRAME_OFFSET_MASK 0x0FFFFFFF
/* Version of the format of the encrypted templates. */
-#define FP_TEMPLATE_FORMAT_VERSION 3
+#define FP_TEMPLATE_FORMAT_VERSION 4
/* Constants for encryption parameters */
#define FP_CONTEXT_NONCE_BYTES 12
#define FP_CONTEXT_USERID_WORDS (32 / sizeof(uint32_t))
#define FP_CONTEXT_TAG_BYTES 16
-#define FP_CONTEXT_SALT_BYTES 16
+#define FP_CONTEXT_ENCRYPTION_SALT_BYTES 16
#define FP_CONTEXT_TPM_BYTES 32
+/* Constants for positive match parameters. */
+#define FP_POSITIVE_MATCH_SALT_BYTES 16
+
struct ec_fp_template_encryption_metadata {
/*
* Version of the structure format (N=3).
@@ -5746,7 +6031,7 @@ struct ec_fp_template_encryption_metadata {
* a different one is used for every message.
*/
uint8_t nonce[FP_CONTEXT_NONCE_BYTES];
- uint8_t salt[FP_CONTEXT_SALT_BYTES];
+ uint8_t encryption_salt[FP_CONTEXT_ENCRYPTION_SALT_BYTES];
uint8_t tag[FP_CONTEXT_TAG_BYTES];
};
@@ -5779,6 +6064,18 @@ struct ec_params_fp_context {
uint32_t userid[FP_CONTEXT_USERID_WORDS];
} __ec_align4;
+enum fp_context_action {
+ FP_CONTEXT_ASYNC = 0,
+ FP_CONTEXT_GET_RESULT = 1,
+};
+
+/* Version 1 of the command is "asynchronous". */
+struct ec_params_fp_context_v1 {
+ uint8_t action; /**< enum fp_context_action */
+ uint8_t reserved[3]; /**< padding for alignment */
+ uint32_t userid[FP_CONTEXT_USERID_WORDS];
+} __ec_align4;
+
#define EC_CMD_FP_STATS 0x0407
#define FPSTATS_CAPTURE_INV BIT(0)
@@ -5820,6 +6117,17 @@ struct ec_response_fp_encryption_status {
uint32_t status;
} __ec_align4;
+#define EC_CMD_FP_READ_MATCH_SECRET 0x040A
+struct ec_params_fp_read_match_secret {
+ uint16_t fgr;
+} __ec_align4;
+
+/* The positive match secret has the length of the SHA256 digest. */
+#define FP_POSITIVE_MATCH_SECRET_BYTES 32
+struct ec_response_fp_read_match_secret {
+ uint8_t positive_match_secret[FP_POSITIVE_MATCH_SECRET_BYTES];
+} __ec_align4;
+
/*****************************************************************************/
/* Touchpad MCU commands: range 0x0500-0x05FF */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 04:16:10 +0000