diff options
Diffstat (limited to 'src/include/cpu/amd')
| -rw-r--r-- | src/include/cpu/amd/gx2def.h | 258 |
1 files changed, 256 insertions, 2 deletions
diff --git a/src/include/cpu/amd/gx2def.h b/src/include/cpu/amd/gx2def.h index cda78d4a04..dc4559ee60 100644 --- a/src/include/cpu/amd/gx2def.h +++ b/src/include/cpu/amd/gx2def.h @@ -72,7 +72,8 @@ #define GL1_GLCP 3 #define GL1_PCI 4 #define GL1_FG 5 - +#define GL1_VIP 5 +#define GL1_AES 6 #define MSR_GLIU0 (GL0_GLIU0 << 29) + (1 << 28) /* To get on GeodeLink one bit has to be set */ #define MSR_MC (GL0_MC << 29) @@ -85,7 +86,8 @@ #define MSR_GLCP (GL1_GLCP << 26) + MSR_GLIU1 #define MSR_PCI (GL1_PCI << 26) + MSR_GLIU1 #define MSR_FG (GL1_FG << 26) + MSR_GLIU1 - +#define MSR_VIP ((GL1_VIP << 26) + MSR_GLIU1) +#define MSR_AES ((GL1_AES << 26) + MSR_GLIU1) /* South Bridge*/ #define MSR_SB (SB_PORT << 23) + MSR_PCI /* address to the SouthBridge*/ #define SB_SHIFT 20 /* 29 -> 26 -> 23 -> 20...... When making a SB address uses this shift.*/ @@ -429,4 +431,256 @@ #define FG_GLD_MSR_CAP MSR_FG + 0x2000 #define FG_GLD_MSR_PM MSR_FG + 0x2004 +/* VIP GLIU1 port 5*/ +/* */ +#define VIP_GLD_MSR_CAP (MSR_VIP + 0x2000) +#define VIP_GLD_MSR_CONFIG (MSR_VIP + 0x2001) +#define VIP_GLD_MSR_PM (MSR_VIP + 0x2004) +#define VIP_BIST (MSR_VIP + 0x2005) +/* */ +/* AES GLIU1 port 6*/ +/* */ +#define AES_GLD_MSR_CAP (MSR_AES + 0x2000) +#define AES_GLD_MSR_CONFIG (MSR_AES + 0x2001) +#define AES_GLD_MSR_PM (MSR_AES + 0x2004) +#define AES_CONTROL (MSR_AES + 0x2006) +/* more fun stuff */ +#define BM 1 /* Base Mask - map power of 2 size aligned region*/ +#define BMO 2 /* BM with an offset*/ +#define R 3 /* Range - 4k range minimum*/ +#define RO 4 /* R with offset*/ +#define SC 5 /* Swiss 0xCeese - maps a 256K region in to 16K 0xcunks. Set W/R*/ +#define BMIO 6 /* Base Mask IO*/ +#define SCIO 7 /* Swiss 0xCeese IO*/ +#define SC_SHADOW 8 /* Special marker for Shadow SC descriptors so setShadow proc is independant of CPU*/ +#define R_SYSMEM 9 /* Special marker for SYSMEM R descriptors so GLIUInit proc is independant of CPU*/ +#define BMO_SMM 10 /* Specail marker for SMM*/ +#define BM_SMM 11 /* Specail marker for SMM*/ +#define BMO_DMM 12 /* Specail marker for DMM*/ +#define BM_DMM 13 /* Specail marker for DMM*/ +#define RO_FB 14 /* special for Frame buffer.*/ +#define R_FB 15 /* special for FB.*/ +#define OTHER 0x0FE /* Special marker for other*/ +#define GL_END 0x0FF /* end*/ + +#define MSR_GL0 (GL1_GLIU0 << 29) + +/* Set up desc addresses from 20 - 3f*/ +/* This is chip specific!*/ +#define MSR_GLIU0_BASE1 (MSR_GLIU0 + 0x20) /* BM*/ +#define MSR_GLIU0_BASE2 (MSR_GLIU0 + 0x21) /* BM*/ +#define MSR_GLIU0_SHADOW (MSR_GLIU0 + 0x2C) /* SCO should only be SC*/ +#define MSR_GLIU0_SYSMEM (MSR_GLIU0 + 0x28) /* RO should only be R*/ +#define MSR_GLIU0_SMM (MSR_GLIU0 + 0x26) /* BMO*/ +#define MSR_GLIU0_DMM (MSR_GLIU0 + 0x27) /* BMO*/ + +#define MSR_GLIU1_BASE1 (MSR_GLIU1 + 0x20) /* BM*/ +#define MSR_GLIU1_BASE2 (MSR_GLIU1 + 0x21) /* BM*/ +#define MSR_GLIU1_SHADOW (MSR_GLIU1 + 0x2D) /* SCO should only be SC*/ +#define MSR_GLIU1_SYSMEM (MSR_GLIU1 + 0x29) /* RO should only be R*/ +#define MSR_GLIU1_SMM (MSR_GLIU1 + 0x23) /* BM*/ +#define MSR_GLIU1_DMM (MSR_GLIU1 + 0x24) /* BM*/ +#define MSR_GLIU1_FPU_TRAP (MSR_GLIU1 + 0x0E3) /* FooGlue F0 for FPU*/ + +/* definitions that are "once you are mostly up, start VSA" type things */ +#define SMM_OFFSET 0x40400000 +#define SMM_SIZE 256 +#define DMM_OFFSET 0x0C0000000 +#define DMM_SIZE 128 +#define FB_OFFSET 0x41000000 +#define PCI_MEM_TOP 0x0EFFFFFFF // Top of PCI mem allocation region +#define PCI_IO_TOP 0x0EFFF // Top of PCI I/O allocation region +#define END_OPTIONROM_SPACE 0x0DFFF // E0000 is reserved for SystemROMs. + +#define MDD_SMBUS 0x06000 // SMBUS IO location +#define MDD_GPIO 0x06100 // GPIO & ICF IO location +#define MDD_MFGPT 0x06200 // General Purpose Timers IO location +#define MDD_IRQ_MAPPER 0x06300 // IRQ Mapper +#define ACPI_BASE 0x09C00 // ACPI Base +#define MDD_PM 0x09D00 // Power Management Logic - placed at the end of ACPI + +#define CS5535_IDSEL 0x02000000 // IDSEL = AD25, device #15 +#define CHIPSET_DEV_NUM 15 +#define IDSEL_BASE 11 // bit 11 = device 1 +#define SB_PORT 2 // port of the SouthBridge + +/* standard AMD post definitions -- might as well use them. */ +#define POST_Output_Port (0x080) /* port to write post codes to*/ + +#define POST_preSioInit (0x000) /* geode.asm*/ +#define POST_clockInit (0x001) /* geode.asm*/ +#define POST_CPURegInit (0x002) /* geode.asm*/ +#define POST_UNREAL (0x003) /* geode.asm*/ +#define POST_CPUMemRegInit (0x004) /* geode.asm*/ +#define POST_CPUTest (0x005) /* geode.asm*/ +#define POST_memSetup (0x006) /* geode.asm*/ +#define POST_memSetUpStack (0x007) /* geode.asm*/ +#define POST_memTest (0x008) /* geode.asm*/ +#define POST_shadowRom (0x009) /* geode.asm*/ +#define POST_memRAMoptimize (0x00A) /* geode.asm*/ +#define POST_cacheInit (0x00B) /* geode.asm*/ +#define POST_northBridgeInit (0x00C) /* geode.asm*/ +#define POST_chipsetInit (0x00D) /* geode.asm*/ +#define POST_sioTest (0x00E) /* geode.asm*/ +#define POST_pcATjunk (0x00F) /* geode.asm*/ + + +#define POST_intTable (0x010) /* geode.asm*/ +#define POST_memInfo (0x011) /* geode.asm*/ +#define POST_romCopy (0x012) /* geode.asm*/ +#define POST_PLLCheck (0x013) /* geode.asm*/ +#define POST_keyboardInit (0x014) /* geode.asm*/ +#define POST_cpuCacheOff (0x015) /* geode.asm*/ +#define POST_BDAInit (0x016) /* geode.asm*/ +#define POST_pciScan (0x017) /* geode.asm*/ +#define POST_optionRomInit (0x018) /* geode.asm*/ +#define POST_ResetLimits (0x019) /* geode.asm*/ +#define POST_summary_screen (0x01A) /* geode.asm*/ +#define POST_Boot (0x01B) /* geode.asm*/ +#define POST_SystemPreInit (0x01C) /* geode.asm*/ +#define POST_ClearRebootFlag (0x01D) /* geode.asm*/ +#define POST_GLIUInit (0x01E) /* geode.asm*/ +#define POST_BootFailed (0x01F) /* geode.asm*/ + + +#define POST_CPU_ID (0x020) /* cpucpuid.asm*/ +#define POST_COUNTERBROKEN (0x021) /* pllinit.asm*/ +#define POST_DIFF_DIMMS (0x022) /* pllinit.asm*/ +#define POST_WIGGLE_MEM_LINES (0x023) /* pllinit.asm*/ +#define POST_NO_GLIU_DESC (0x024) /* pllinit.asm*/ +#define POST_CPU_LCD_CHECK (0x025) /* pllinit.asm*/ +#define POST_CPU_LCD_PASS (0x026) /* pllinit.asm*/ +#define POST_CPU_LCD_FAIL (0x027) /* pllinit.asm*/ +#define POST_CPU_STEPPING (0x028) /* cpucpuid.asm*/ +#define POST_CPU_DM_BIST_FAILURE (0x029) /* gx2reg.asm*/ +#define POST_CPU_FLAGS (0x02A) /* cpucpuid.asm*/ +#define POST_CHIPSET_ID (0x02b) /* chipset.asm*/ +#define POST_CHIPSET_ID_PASS (0x02c) /* chipset.asm*/ +#define POST_CHIPSET_ID_FAIL (0x02d) /* chipset.asm*/ +#define POST_CPU_ID_GOOD (0x02E) /* cpucpuid.asm*/ +#define POST_CPU_ID_FAIL (0x02F) /* cpucpuid.asm*/ + + + +/* PCI config*/ +#define P80_PCICFG (0x030) /* pcispace.asm*/ + + +/* PCI io*/ +#define P80_PCIIO (0x040) /* pcispace.asm*/ + + +/* PCI memory*/ +#define P80_PCIMEM (0x050) /* pcispace.asm*/ + + +/* SIO*/ +#define P80_SIO (0x060) /* *sio.asm*/ + +/* Memory Setp*/ +#define P80_MEM_SETUP (0x070) /* docboot meminit*/ +#define POST_MEM_SETUP (0x070) /* memsize.asm*/ +#define ERROR_32BIT_DIMMS (0x071) /* memsize.asm*/ +#define POST_MEM_SETUP2 (0x072) /* memsize.asm*/ +#define POST_MEM_SETUP3 (0x073) /* memsize.asm*/ +#define POST_MEM_SETUP4 (0x074) /* memsize.asm*/ +#define POST_MEM_SETUP5 (0x075) /* memsize.asm*/ +#define POST_MEM_ENABLE (0x076) /* memsize.asm*/ +#define ERROR_NO_DIMMS (0x077) /* memsize.asm*/ +#define ERROR_DIFF_DIMMS (0x078) /* memsize.asm*/ +#define ERROR_BAD_LATENCY (0x079) /* memsize.asm*/ +#define ERROR_SET_PAGE (0x07a) /* memsize.asm*/ +#define ERROR_DENSITY_DIMM (0x07b) /* memsize.asm*/ +#define ERROR_UNSUPPORTED_DIMM (0x07c) /* memsize.asm*/ +#define ERROR_BANK_SET (0x07d) /* memsize.asm*/ +#define POST_MEM_SETUP_GOOD (0x07E) /* memsize.asm*/ +#define POST_MEM_SETUP_FAIL (0x07F) /* memsize.asm*/ + + +#define POST_UserPreInit (0x080) /* geode.asm*/ +#define POST_UserPostInit (0x081) /* geode.asm*/ +#define POST_Equipment_check (0x082) /* geode.asm*/ +#define POST_InitNVRAMBX (0x083) /* geode.asm*/ +#define POST_NoPIRTable (0x084) /* pci.asm*/ +#define POST_ChipsetFingerPrintPass (0x085) /* prechipsetinit*/ +#define POST_ChipsetFingerPrintFail (0x086) /* prechipsetinit*/ +#define POST_CPU_IM_TAG_BIST_FAILURE (0x087) /* gx2reg.asm*/ +#define POST_CPU_IM_DATA_BIST_FAILURE (0x088) /* gx2reg.asm*/ +#define POST_CPU_FPU_BIST_FAILURE (0x089) /* gx2reg.asm*/ +#define POST_CPU_BTB_BIST_FAILURE (0x08a) /* gx2reg.asm*/ +#define POST_CPU_EX_BIST_FAILURE (0x08b) /* gx2reg.asm*/ +#define POST_Chipset_PI_Test_Fail (0x08c) /* prechipsetinit*/ +#define POST_Chipset_SMBus_SDA_Test_Fail (0x08d) /* prechipsetinit*/ +#define POST_BIT_CLK_Fail (0x08e) /* Hawk geode.asm override*/ + + +#define POST_STACK_SETUP (0x090) /* memstack.asm*/ +#define POST_CPU_PF_BIST_FAILURE (0x091) /* gx2reg.asm*/ +#define POST_CPU_L2_BIST_FAILURE (0x092) /* gx2reg.asm*/ +#define POST_CPU_GLCP_BIST_FAILURE (0x093) /* gx2reg.asm*/ +#define POST_CPU_DF_BIST_FAILURE (0x094) /* gx2reg.asm*/ +#define POST_CPU_VG_BIST_FAILURE (0x095) /* gx2reg.asm*/ +#define POST_CPU_VIP_BIST_FAILURE (0x096) /* gx2reg.asm*/ +#define POST_STACK_SETUP_PASS (0x09E) /* memstack.asm*/ +#define POST_STACK_SETUP_FAIL (0x09F) /* memstack.asm*/ + + +#define POST_PLL_INIT (0x0A0) /* pllinit.asm*/ +#define POST_PLL_MANUAL (0x0A1) /* pllinit.asm*/ +#define POST_PLL_STRAP (0x0A2) /* pllinit.asm*/ +#define POST_PLL_RESET_FAIL (0x0A3) /* pllinit.asm*/ +#define POST_PLL_PCI_FAIL (0x0A4) /* pllinit.asm*/ +#define POST_PLL_MEM_FAIL (0x0A5) /* pllinit.asm*/ +#define POST_PLL_CPU_VER_FAIL (0x0A6) /* pllinit.asm*/ + + +#define POST_MEM_TESTMEM (0x0B0) /* memtest.asm*/ +#define POST_MEM_TESTMEM1 (0x0B1) /* memtest.asm*/ +#define POST_MEM_TESTMEM2 (0x0B2) /* memtest.asm*/ +#define POST_MEM_TESTMEM3 (0x0B3) /* memtest.asm*/ +#define POST_MEM_TESTMEM4 (0x0B4) /* memtest.asm*/ +#define POST_MEM_TESTMEM_PASS (0x0BE) /* memtest.asm*/ +#define POST_MEM_TESTMEM_FAIL (0x0BF) /* memtest.asm*/ + + +#define POST_SECUROM_SECBOOT_START (0x0C0) /* secstart.asm*/ +#define POST_SECUROM_BOOTSRCSETUP (0x0C1) /* secstart.asm*/ +#define POST_SECUROM_REMAP_FAIL (0x0C2) /* secstart.asm*/ +#define POST_SECUROM_BOOTSRCSETUP_FAIL (0x0C3) /* secstart.asm*/ +#define POST_SECUROM_DCACHESETUP (0x0C4) /* secstart.asm*/ +#define POST_SECUROM_DCACHESETUP_FAIL (0x0C5) /* secstart.asm*/ +#define POST_SECUROM_ICACHESETUP (0x0C6) /* secstart.asm*/ +#define POST_SECUROM_DESCRIPTORSETUP (0x0C7) /* secstart.asm*/ +#define POST_SECUROM_DCACHESETUPBIOS (0x0C8) /* secstart.asm*/ +#define POST_SECUROM_PLATFORMSETUP (0x0C9) /* secstart.asm*/ +#define POST_SECUROM_SIGCHECKBIOS (0x0CA) /* secstart.asm*/ +#define POST_SECUROM_ICACHESETUPBIOS (0x0CB) /* secstart.asm*/ +#define POST_SECUROM_PASS (0x0CC) /* secstart.asm*/ +#define POST_SECUROM_FAIL (0x0CD) /* secstart.asm*/ + +#define POST_RCONFInitError (0x0CE) /* cache.asm*/ +#define POST_CacheInitError (0x0CF) /* cache.asm*/ + + +#define POST_ROM_PREUNCOMPRESS (0x0D0) /* rominit.asm*/ +#define POST_ROM_UNCOMPRESS (0x0D1) /* rominit.asm*/ +#define POST_ROM_SMM_INIT (0x0D2) /* rominit.asm*/ +#define POST_ROM_VID_BIOS (0x0D3) /* rominit.asm*/ +#define POST_ROM_LCDINIT (0x0D4) /* rominit.asm*/ +#define POST_ROM_SPLASH (0x0D5) /* rominit.asm*/ +#define POST_ROM_HDDINIT (0x0D6) /* rominit.asm*/ +#define POST_ROM_SYS_INIT (0x0D7) /* rominit.asm*/ +#define POST_ROM_DMM_INIT (0x0D8) /* rominit.asm*/ +#define POST_ROM_TVINIT (0x0D9) /* rominit.asm*/ +#define POST_ROM_POSTUNCOMPRESS (0x0DE) + + +#define P80_CHIPSET_INIT (0x0E0) /* chipset.asm*/ +#define POST_PreChipsetInit (0x0E1) /* geode.asm*/ +#define POST_LateChipsetInit (0x0E2) /* geode.asm*/ +#define POST_NORTHB_INIT (0x0E8) /* northb.asm*/ + + +#define POST_INTR_SEG_JUMP (0x0F0) /* vector.asm*/ + #endif /* CPU_AMD_GX2DEF_H */ |