diff options
Diffstat (limited to 'src/include/device/dram')
| -rw-r--r-- | src/include/device/dram/common.h | 70 | ||||
| -rw-r--r-- | src/include/device/dram/ddr2.h | 77 | ||||
| -rw-r--r-- | src/include/device/dram/ddr3.h | 36 |
3 files changed, 91 insertions, 92 deletions
diff --git a/src/include/device/dram/common.h b/src/include/device/dram/common.h new file mode 100644 index 0000000000..47023704fe --- /dev/null +++ b/src/include/device/dram/common.h @@ -0,0 +1,70 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com> + * Copyright (C) 2017 Patrick Rudolph <siro@das-labor.org> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef DEVICE_DRAM_COMMON_H +#define DEVICE_DRAM_COMMON_H + +/** + * \brief Convenience definitions for TCK values + * + * Different values for tCK, representing standard DDR3 frequencies. + * These values are in 1/256 ns units. + * @{ + */ +#define NS2MHZ_DIV256 (1000 << 8) + +#define TCK_1333MHZ 192 +#define TCK_1200MHZ 212 +#define TCK_1100MHZ 232 +#define TCK_1066MHZ 240 +#define TCK_1000MHZ 256 +#define TCK_933MHZ 274 +#define TCK_900MHZ 284 +#define TCK_800MHZ 320 +#define TCK_700MHZ 365 +#define TCK_666MHZ 384 +#define TCK_533MHZ 480 +#define TCK_400MHZ 640 +#define TCK_333MHZ 768 +#define TCK_266MHZ 960 +#define TCK_200MHZ 1280 +/** @} */ + +/** + * \brief Convenience macro for enabling printk with CONFIG_DEBUG_RAM_SETUP + * + * Use this macro instead of printk(); for verbose RAM initialization messages. + * When CONFIG_DEBUG_RAM_SETUP is not selected, these messages are automatically + * disabled. + * @{ + */ +#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) +#define printram(x, ...) printk(BIOS_DEBUG, x, ##__VA_ARGS__) +#else +#define printram(x, ...) +#endif +/** @} */ + +/** Result of the SPD decoding process */ +enum spd_status { + SPD_STATUS_OK = 0, + SPD_STATUS_INVALID, + SPD_STATUS_CRC_ERROR, + SPD_STATUS_INVALID_FIELD, +}; + +#endif /* DEVICE_DRAM_COMMON_H */ diff --git a/src/include/device/dram/ddr2.h b/src/include/device/dram/ddr2.h index 7322b122a7..4aad1bcd8f 100644 --- a/src/include/device/dram/ddr2.h +++ b/src/include/device/dram/ddr2.h @@ -30,55 +30,24 @@ #include <stdint.h> #include <spd.h> - -/** - * \brief Convenience definitions for TCK values - * - * Different values for tCK, representing standard DDR2 frequencies. - * These values are in 1/256 ns units. - * @{ - */ -#define TCK_800MHZ 320 -#define TCK_700MHZ 365 -#define TCK_666MHZ 384 -#define TCK_533MHZ 480 -#define TCK_400MHZ 640 -#define TCK_333MHZ 768 -#define TCK_266MHZ 960 -#define TCK_200MHZ 1280 -/** @} */ - -/** - * \brief Convenience macro for enabling printk with CONFIG_DEBUG_RAM_SETUP - * - * Use this macro instead of printk(); for verbose RAM initialization messages. - * When CONFIG_DEBUG_RAM_SETUP is not selected, these messages are automatically - * disabled. - * @{ - */ -#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) -#define printram(x, ...) printk(BIOS_DEBUG, x, ##__VA_ARGS__) -#else -#define printram(x, ...) -#endif -/** @} */ +#include <device/dram/common.h> /* * Module type (byte 20, bits 5:0) of SPD * This definition is specific to DDR2. DDR3 SPDs have a different structure. */ -enum spd_dimm_type { - SPD_DIMM_TYPE_UNDEFINED = 0x00, - SPD_DIMM_TYPE_RDIMM = 0x01, - SPD_DIMM_TYPE_UDIMM = 0x02, - SPD_DIMM_TYPE_SO_DIMM = 0x04, - SPD_DIMM_TYPE_72B_SO_CDIMM = 0x06, - SPD_DIMM_TYPE_72B_SO_RDIMM = 0x07, - SPD_DIMM_TYPE_MICRO_DIMM = 0x08, - SPD_DIMM_TYPE_MINI_RDIMM = 0x10, - SPD_DIMM_TYPE_MINI_UDIMM = 0x20, +enum spd_dimm_type_ddr2 { + SPD_DDR2_DIMM_TYPE_UNDEFINED = 0x00, + SPD_DDR2_DIMM_TYPE_RDIMM = 0x01, + SPD_DDR2_DIMM_TYPE_UDIMM = 0x02, + SPD_DDR2_DIMM_TYPE_SO_DIMM = 0x04, + SPD_DDR2_DIMM_TYPE_72B_SO_CDIMM = 0x06, + SPD_DDR2_DIMM_TYPE_72B_SO_RDIMM = 0x07, + SPD_DDR2_DIMM_TYPE_MICRO_DIMM = 0x08, + SPD_DDR2_DIMM_TYPE_MINI_RDIMM = 0x10, + SPD_DDR2_DIMM_TYPE_MINI_UDIMM = 0x20, /* Masks to bits 5:0 to give the dimm type */ - SPD_DIMM_TYPE_MASK = 0x3f, + SPD_DDR2_DIMM_TYPE_MASK = 0x3f, }; /** @@ -86,7 +55,7 @@ enum spd_dimm_type { * * Characteristic flags for the DIMM, as presented by the SPD */ -union dimm_flags_st { +union dimm_flags_ddr2_st { /* The whole point of the union/struct construct is to allow us to clear * all the bits with one line: flags.raw = 0. * We do not care how these bits are ordered */ @@ -130,9 +99,9 @@ union dimm_flags_st { * * The characteristics of each DIMM, as presented by the SPD */ -struct dimm_attr_st { +struct dimm_attr_ddr2_st { enum spd_memory_type dram_type; - enum spd_dimm_type dimm_type; + enum spd_dimm_type_ddr2 dimm_type; /* BCD SPD revision */ u8 rev; /* Supported CAS mask, bit 0 == CL0 .. bit7 == CL7 */ @@ -144,7 +113,7 @@ struct dimm_attr_st { * Fields 0 and 1 are unused. */ u32 access_time[8]; /* Flags extracted from SPD */ - union dimm_flags_st flags; + union dimm_flags_ddr2_st flags; /* Number of banks */ u8 banks; /* SDRAM width */ @@ -199,23 +168,15 @@ struct dimm_attr_st { u32 serial; }; -/** Result of the SPD decoding process */ -enum spd_status { - SPD_STATUS_OK = 0, - SPD_STATUS_INVALID, - SPD_STATUS_CRC_ERROR, - SPD_STATUS_INVALID_FIELD, -}; - /** Maximum SPD size supported */ #define SPD_SIZE_MAX_DDR2 128 -int spd_dimm_is_registered_ddr2(enum spd_dimm_type type); +int spd_dimm_is_registered_ddr2(enum spd_dimm_type_ddr2 type); u8 spd_ddr2_calc_checksum(u8 *spd, int len); u32 spd_decode_spd_size_ddr2(u8 byte0); u32 spd_decode_eeprom_size_ddr2(u8 byte1); -int spd_decode_ddr2(struct dimm_attr_st *dimm, u8 spd[SPD_SIZE_MAX_DDR2]); -void dram_print_spd_ddr2(const struct dimm_attr_st *dimm); +int spd_decode_ddr2(struct dimm_attr_ddr2_st *dimm, u8 spd[SPD_SIZE_MAX_DDR2]); +void dram_print_spd_ddr2(const struct dimm_attr_ddr2_st *dimm); void normalize_tck(u32 *tclk); u8 spd_get_msbs(u8 c); diff --git a/src/include/device/dram/ddr3.h b/src/include/device/dram/ddr3.h index 2cfd6acbff..0756095588 100644 --- a/src/include/device/dram/ddr3.h +++ b/src/include/device/dram/ddr3.h @@ -31,6 +31,8 @@ #include <stdint.h> #include <spd.h> +#include <device/dram/common.h> + /** * Convenience definitions for SPD offsets @@ -46,32 +48,6 @@ /** @} */ /** - * \brief Convenience definitions for TCK values - * - * Different values for tCK, representing standard DDR3 frequencies. - * These values are in 1/256 ns units. - * @{ - */ -#define NS2MHZ_DIV256 (1000 << 8) - -#define TCK_1333MHZ 192 -#define TCK_1200MHZ 212 -#define TCK_1100MHZ 232 -#define TCK_1066MHZ 240 -#define TCK_1000MHZ 256 -#define TCK_933MHZ 274 -#define TCK_900MHZ 284 -#define TCK_800MHZ 320 -#define TCK_700MHZ 365 -#define TCK_666MHZ 384 -#define TCK_533MHZ 480 -#define TCK_400MHZ 640 -#define TCK_333MHZ 768 -#define TCK_266MHZ 960 -#define TCK_200MHZ 1280 -/** @} */ - -/** * \brief Convenience macro for enabling printk with CONFIG_DEBUG_RAM_SETUP * * Use this macro instead of printk(); for verbose RAM initialization messages. @@ -198,14 +174,6 @@ typedef struct dimm_attr_st { u8 part_number[17]; } dimm_attr; -/** Result of the SPD decoding process */ -enum spd_status { - SPD_STATUS_OK = 0, - SPD_STATUS_INVALID, - SPD_STATUS_CRC_ERROR, - SPD_STATUS_INVALID_FIELD, -}; - enum ddr3_xmp_profile { DDR3_XMP_PROFILE_1 = 0, DDR3_XMP_PROFILE_2 = 1, |