summaryrefslogtreecommitdiff
path: root/src/include
diff options
context:
space:
mode:
Diffstat (limited to 'src/include')
-rw-r--r--src/include/uart8250.h108
1 files changed, 0 insertions, 108 deletions
diff --git a/src/include/uart8250.h b/src/include/uart8250.h
deleted file mode 100644
index c63153c632..0000000000
--- a/src/include/uart8250.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2003 Eric Biederman
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef UART8250_H
-#define UART8250_H
-
-/* Data */
-#define UART_RBR 0x00
-#define UART_TBR 0x00
-
-/* Control */
-#define UART_IER 0x01
-#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
-#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
-#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
-#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
-
-#define UART_IIR 0x02
-#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
-#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
-
-#define UART_IIR_MSI 0x00 /* Modem status interrupt */
-#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
-#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
-#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
-
-#define UART_FCR 0x02
-#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */
-#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
-#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
-#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
-#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
-#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
-#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
-#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
-#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
-
-#define UART_FCR_RXSR 0x02 /* Receiver soft reset */
-#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */
-
-#define UART_LCR 0x03
-#define UART_LCR_WLS_MSK 0x03 /* character length select mask */
-#define UART_LCR_WLS_5 0x00 /* 5 bit character length */
-#define UART_LCR_WLS_6 0x01 /* 6 bit character length */
-#define UART_LCR_WLS_7 0x02 /* 7 bit character length */
-#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
-#define UART_LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define UART_LCR_PEN 0x08 /* Parity enable */
-#define UART_LCR_EPS 0x10 /* Even Parity Select */
-#define UART_LCR_STKP 0x20 /* Stick Parity */
-#define UART_LCR_SBRK 0x40 /* Set Break */
-#define UART_LCR_BKSE 0x80 /* Bank select enable */
-#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-
-#define UART_MCR 0x04
-#define UART_MCR_DTR 0x01 /* DTR */
-#define UART_MCR_RTS 0x02 /* RTS */
-#define UART_MCR_OUT1 0x04 /* Out 1 */
-#define UART_MCR_OUT2 0x08 /* Out 2 */
-#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-
-#define UART_MCR_DMA_EN 0x04
-#define UART_MCR_TX_DFR 0x08
-
-#define UART_DLL 0x00
-#define UART_DLM 0x01
-
-/* Status */
-#define UART_LSR 0x05
-#define UART_LSR_DR 0x01 /* Data ready */
-#define UART_LSR_OE 0x02 /* Overrun */
-#define UART_LSR_PE 0x04 /* Parity error */
-#define UART_LSR_FE 0x08 /* Framing error */
-#define UART_LSR_BI 0x10 /* Break */
-#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
-#define UART_LSR_TEMT 0x40 /* Xmitter empty */
-#define UART_LSR_ERR 0x80 /* Error */
-
-#define UART_MSR 0x06
-#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
-#define UART_MSR_RI 0x40 /* Ring Indicator */
-#define UART_MSR_DSR 0x20 /* Data Set Ready */
-#define UART_MSR_CTS 0x10 /* Clear to Send */
-#define UART_MSR_DDCD 0x08 /* Delta DCD */
-#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
-#define UART_MSR_DDSR 0x02 /* Delta DSR */
-#define UART_MSR_DCTS 0x01 /* Delta CTS */
-
-#define UART_SCR 0x07
-#define UART_SPR 0x07
-
-#endif /* UART8250_H */