diff options
Diffstat (limited to 'src/mainboard/amd/inagua/broadcom.c')
| -rw-r--r-- | src/mainboard/amd/inagua/broadcom.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/src/mainboard/amd/inagua/broadcom.c b/src/mainboard/amd/inagua/broadcom.c index 9f140a2ce1..f1c49d204f 100644 --- a/src/mainboard/amd/inagua/broadcom.c +++ b/src/mainboard/amd/inagua/broadcom.c @@ -37,7 +37,7 @@ void broadcom_init(void); #define be(x) cpu_to_be32(x) //this is used a lot! /* C forces us to specify these before defining struct selfboot_patch :-( */ -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) #define INIT1_LENGTH 9 #define INIT2_LENGTH 10 #define INIT3_LENGTH 3 @@ -179,7 +179,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! .powerdown.padding = be16(0x0000), /* Only the lines below may be adapted to your needs ... */ -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) .header.mac_addr = { 0x00, 0x10, 0x18, 0x00, 0x00, 0x00 }, //Broadcom .header.subsys_device = be16(0x1699), //same as pci_device .header.subsys_vendor = be16(0x14E4), //Broadcom @@ -189,7 +189,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! .header.subsys_vendor = be16(0x121D), //LiPPERT #endif .header.pci_device = be16(0x1699), //Broadcom 5785 with GbE PHY -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) .header.patch_version = be16(0x010B), //1.11 (Broadcom's sb5785m1.11) #else .header.patch_version = be16(0x110B), //1.11b, i.e. hacked :-) @@ -208,7 +208,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! * 1 X 0 | 0x330C5180 - - - * 1 X 1 | 0x391C6140 - - - */ -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) .header.basic_config = be16(0x0404), //original for B50610 #else .header.basic_config = be16(0x0604), //bit 9 set so not to mess up PHY regs, kept other bits unchanged @@ -244,7 +244,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! * was added, for reference see Broadcom's changelog. */ .init.hunk1_code = { -#if CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) be(0x082B8104), //CFR-AF: PHY0B: KSZ9021 select PHY104 be(0x082CF0F0), //CFR-AF: PHY0C: KSZ9021 clk/ctl skew (advised by Micrel) be(0x082B8105), //CFR-AF: PHY0B: KSZ9021 select PHY105 @@ -258,7 +258,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! .init.hunk2_when = 0x30, //after global reset, PHY reset .init.hunk2_code = { -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) be(0x08370F08), //v1.06 : PHY17: B50610 select reg. 08 be(0x08350001), //v1.06 : PHY15: B50610 slow link fix be(0x08370F00), //v1.06 : PHY17: B50610 disable reg. 08 @@ -275,20 +275,20 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! be(0xC1F03604), be(0xFFE0FFFF), be(0x00110000), //v1.08 : 3604.20-16: 10Mb clock = 12.5MHz }, //-->INIT3_LENGTH! -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) .init.hunk4_when = 0xD8, //original for B50610 #else .init.hunk4_when = 0x80, //run last, after Linux' "ifconfig up" #endif .init.hunk4_code = { -#if CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) be(0x083F4300), //CFR-AF: PHY1F: IRQ active high be(0x083C0000), //CFR-AF: PHY1C: revert driver writes be(0x08380000), //CFR-AF: PHY18| be(0x083C0000), //CFR-AF: PHY1C| #endif be(0xCB0005A4), be(0xF7F0000C), //v1.01 : if 5A4.0 == 1 -->skip next 12 bytes -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) be(0xC61005A4), be(0x3210C500), //v1.01 : 5A4: PHY LED mode #else be(0xC61005A4), be(0x331C71CE), //CFR-AF: 5A4: fake LED mode @@ -300,7 +300,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! .powerdown.hunk1_when = 0x50, //prior to IDDQ MAC .powerdown.hunk1_code = { -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) be(0x083CB001), //v1.10 : PHY1C: IDDQ B50610 PHY #endif be(0xF7F30116), // IDDQ PHY |