4 files changed, 7 insertions, 7 deletions
diff --git a/src/mainboard/amd/rumba/devicetree.cb b/src/mainboard/amd/rumba/devicetree.cb
index 0c0c8f0c31..bc84dc0373 100644
--- a/src/mainboard/amd/rumba/devicetree.cb
+++ b/src/mainboard/amd/rumba/devicetree.cb
@@ -6,7 +6,7 @@ chip northbridge/amd/gx2
 			device apic 0 on end
 		end
 	end
-  	device pci_domain 0 on 
+  	device pci_domain 0 on
     		device pci 1.0 on end
 		device pci 1.1 on end
       		chip southbridge/amd/cs5536
diff --git a/src/mainboard/amd/rumba/irq_tables.c b/src/mainboard/amd/rumba/irq_tables.c
index 598350b4b8..f751b481ca 100644
--- a/src/mainboard/amd/rumba/irq_tables.c
+++ b/src/mainboard/amd/rumba/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify! 
+/* This file was generated by getpir.c, do not modify!
    (but if you do, please run checkpir on it to verify)
  * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
  *
diff --git a/src/mainboard/amd/rumba/mainboard.c b/src/mainboard/amd/rumba/mainboard.c
index adb1786678..0e7bbb66e7 100644
--- a/src/mainboard/amd/rumba/mainboard.c
+++ b/src/mainboard/amd/rumba/mainboard.c
@@ -19,7 +19,7 @@ static void init(struct device *dev) {
 	printk(BIOS_DEBUG, "AMD RUMBA ENTER %s\n", __func__);
 
 	if (nicirq) {
-		printk(BIOS_DEBUG, "%s (%x,%x)SET PCI interrupt line to %d\n", 
+		printk(BIOS_DEBUG, "%s (%x,%x)SET PCI interrupt line to %d\n",
 			__func__, bus, devfn, nicirq);
 		nic = dev_find_slot(bus, devfn);
 		if (! nic){
diff --git a/src/mainboard/amd/rumba/romstage.c b/src/mainboard/amd/rumba/romstage.c
index 813b009471..958cf3196c 100644
--- a/src/mainboard/amd/rumba/romstage.c
+++ b/src/mainboard/amd/rumba/romstage.c
@@ -35,7 +35,7 @@ static inline unsigned int fls(unsigned int x)
         return r;
 }
 
-static void sdram_set_spd_registers(const struct mem_controller *ctrl) 
+static void sdram_set_spd_registers(const struct mem_controller *ctrl)
 {
 	/* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) *
 	 *                      component Banks (byte 17) * module banks, side (byte 5) *
@@ -86,7 +86,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
 	msr = rdmsr(0x20000019);
 	msr.hi = 0x18000108;
 	msr.lo = 0x696332a3;
-	wrmsr(0x20000019, msr);		
+	wrmsr(0x20000019, msr);
 
 }
 
@@ -122,7 +122,7 @@ static void main(unsigned long bist)
 	};
 
 	SystemPreInit();
-	
+
 
 	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
@@ -134,7 +134,7 @@ static void main(unsigned long bist)
 
 	cpuRegInit();
 	print_err("done cpuRegInit\n");
-	
+
 	sdram_initialize(1, memctrl);
 
 	msr_init();