summaryrefslogtreecommitdiff
path: root/src/mainboard/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/amd')
-rw-r--r--src/mainboard/amd/tilapia_fam10/mainboard.c43
-rw-r--r--src/mainboard/amd/tilapia_fam10/resourcemap.c12
-rw-r--r--src/mainboard/amd/tilapia_fam10/romstage.c27
3 files changed, 10 insertions, 72 deletions
diff --git a/src/mainboard/amd/tilapia_fam10/mainboard.c b/src/mainboard/amd/tilapia_fam10/mainboard.c
index 6652723a46..f3d67e4498 100644
--- a/src/mainboard/amd/tilapia_fam10/mainboard.c
+++ b/src/mainboard/amd/tilapia_fam10/mainboard.c
@@ -88,35 +88,6 @@ void set_pcie_reset()
pci_write_config16(sm_dev, 0x7e, word);
}
-#if 0 /* TODO: */
-/********************************************************
-* tilapia uses SB700 GPIO8 to detect IDE_DMA66.
-* IDE_DMA66 is routed to GPIO 8. So we read Gpio 8 to
-* get the cable type, 40 pin or 80 pin?
-********************************************************/
-static void get_ide_dma66(void)
-{
- u8 byte;
- /*u32 sm_dev, ide_dev; */
- device_t sm_dev, ide_dev;
-
- sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
-
- byte = pci_read_config8(sm_dev, 0xA9);
- byte |= (1 << 4); /* Set Gpio8 as input */
- pci_write_config8(sm_dev, 0xA9, byte);
-
- ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
- byte = pci_read_config8(ide_dev, 0x56);
- byte &= ~(7 << 0);
- if ((1 << 4) & pci_read_config8(sm_dev, 0xAA))
- byte |= 2 << 0; /* mode 2 */
- else
- byte |= 5 << 0; /* mode 5 */
- pci_write_config8(ide_dev, 0x56, byte);
-}
-#endif
-
/*
* justify the dev3 is exist or not
*/
@@ -251,18 +222,7 @@ static void set_thermal_config(void)
pm_iowrite(0x3c, byte);
/* THERMTRIP pin */
- /* byte = pm_ioread(0x68);
- * byte |= 1 << 3;
- * pm_iowrite(0x68, byte);
- *
- * byte = pm_ioread(0x55);
- * byte |= 1 << 0;
- * pm_iowrite(0x55, byte);
- *
- * byte = pm_ioread(0x67);
- * byte &= ~( 1 << 6);
- * pm_iowrite(0x67, byte);
- */
+
}
/*************************************************
@@ -274,7 +234,6 @@ static void mainboard_enable(device_t dev)
printk(BIOS_INFO, "Mainboard TILAPIA Enable. dev=0x%p\n", dev);
set_pcie_dereset();
- /* get_ide_dma66(); */
set_thermal_config();
set_gpio40_gfx();
}
diff --git a/src/mainboard/amd/tilapia_fam10/resourcemap.c b/src/mainboard/amd/tilapia_fam10/resourcemap.c
index 95d009ac1e..d696c4dfb3 100644
--- a/src/mainboard/amd/tilapia_fam10/resourcemap.c
+++ b/src/mainboard/amd/tilapia_fam10/resourcemap.c
@@ -13,8 +13,6 @@
* GNU General Public License for more details.
*/
-
-
static void setup_mb_resource_map(void)
{
static const unsigned int register_values[] = {
@@ -45,7 +43,7 @@ static void setup_mb_resource_map(void)
* This field defines the upper address bits of a 40 bit address
* that define the end of the DRAM region.
*/
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10
+ /* Don't touch it, we need it for CONFIG_CAR_FAM10 */
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
@@ -83,7 +81,7 @@ static void setup_mb_resource_map(void)
* This field defines the upper address bits of a 40-bit address
* that define the start of the DRAM region.
*/
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10
+ /* don't touch it, we need it for CONFIG_CAR_FAM10 */
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
@@ -131,7 +129,6 @@ static void setup_mb_resource_map(void)
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000,
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00,
/* Memory-Mapped I/O Base i Registers
* F1:0x80 i = 0
@@ -166,7 +163,6 @@ static void setup_mb_resource_map(void)
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000,
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,
/* PCI I/O Limit i Registers
* F1:0xC4 i = 0
@@ -193,7 +189,6 @@ static void setup_mb_resource_map(void)
* This field defines the end of PCI I/O region n
* [31:25] Reserved
*/
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
@@ -223,7 +218,6 @@ static void setup_mb_resource_map(void)
* This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
@@ -264,7 +258,7 @@ static void setup_mb_resource_map(void)
* [31:24] Bus Number Limit i
* This field defines the highest bus number in configuration regin i
*/
-// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0
+ /* AMD 8111 on link0 of CPU 0 */
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
diff --git a/src/mainboard/amd/tilapia_fam10/romstage.c b/src/mainboard/amd/tilapia_fam10/romstage.c
index 1faac4d73f..c68fcccced 100644
--- a/src/mainboard/amd/tilapia_fam10/romstage.c
+++ b/src/mainboard/amd/tilapia_fam10/romstage.c
@@ -13,11 +13,9 @@
* GNU General Public License for more details.
*/
-//#define SYSTEM_TYPE 0 /* SERVER */
#define SYSTEM_TYPE 1 /* DESKTOP */
-//#define SYSTEM_TYPE 2 /* MOBILE */
-//used by incoherent_ht
+/* used by incoherent_ht */
#define FAM10_SCAN_PCI_BUS 0
#define FAM10_ALLOCATE_IO_RANGE 0
@@ -102,12 +100,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
console_init();
-// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
-
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- // Load MPB
+ /* Load MPB */
val = cpuid_eax(1);
printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
@@ -166,10 +162,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_code(0x39);
- if (!warm_reset_detect(0)) { // BSP is node 0
+ if (!warm_reset_detect(0)) { /* BSP is node 0 */
init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
} else {
- init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
+ init_fidvid_stage2(bsp_apicid, 0); /* BSP is node 0 */
}
post_code(0x3A);
@@ -196,8 +192,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_code(0x40);
-// die("Die Before MCT init.");
-
timestamp_add_now(TS_BEFORE_INITRAM);
printk(BIOS_DEBUG, "raminit_amdmct()\n");
raminit_amdmct(sysinfo);
@@ -208,21 +202,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
amdmct_cbmem_store_info(sysinfo);
-/*
- dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200);
- dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200);
- dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200);
- dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200);
-*/
-
-// die("After MCT init before CAR disabled.");
-
rs780_before_pci_init();
sb7xx_51xx_before_pci_init();
post_code(0x42);
- post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
- post_code(0x43); // Should never see this post code.
+ post_cache_as_ram(); /* BSP switch stack to ram, copy then execute LB. */
+ post_code(0x43); /* Should never see this post code. */
}
/**