summaryrefslogtreecommitdiff
path: root/src/mainboard/apple/macbook21
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/apple/macbook21')
-rw-r--r--src/mainboard/apple/macbook21/romstage.c69
1 files changed, 4 insertions, 65 deletions
diff --git a/src/mainboard/apple/macbook21/romstage.c b/src/mainboard/apple/macbook21/romstage.c
index e7ff902a2d..7bec26bd1c 100644
--- a/src/mainboard/apple/macbook21/romstage.c
+++ b/src/mainboard/apple/macbook21/romstage.c
@@ -286,12 +286,9 @@ static void early_ich7_init(void)
void main(unsigned long bist)
{
- u32 reg32;
- int boot_mode = 0;
- int cbmem_was_initted;
+ int s3resume = 0;
const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x51, 0x52, 0x53 };
-
timestamp_init(get_initial_timestamp());
timestamp_add_now(TS_START_ROMSTAGE);
@@ -324,22 +321,7 @@ void main(unsigned long bist)
*/
i945_early_initialization();
- /* Read PM1_CNT */
- reg32 = inl(DEFAULT_PMBASE + 0x04);
- printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32);
- if (((reg32 >> 10) & 7) == 5) {
-#if CONFIG_HAVE_ACPI_RESUME
- printk(BIOS_DEBUG, "Resume from S3 detected.\n");
- boot_mode = 2;
- /* Clear SLP_TYPE. This will break stage2 but
- * we care for that when we get there.
- */
- outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04);
-
-#else
- printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
-#endif
- }
+ s3resume = southbridge_detect_s3_resume();
/* Enable SPD ROMs and DDR-II DRAM */
enable_smbus();
@@ -349,7 +331,7 @@ void main(unsigned long bist)
#endif
timestamp_add_now(TS_BEFORE_INITRAM);
- sdram_initialize(boot_mode, spd_addrmap);
+ sdram_initialize(s3resume ? 2 : 0, spd_addrmap);
timestamp_add_now(TS_AFTER_INITRAM);
/* Perform some initialization that must run before stage2 */
@@ -364,50 +346,7 @@ void main(unsigned long bist)
fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */
- i945_late_initialization();
-
-#if !CONFIG_HAVE_ACPI_RESUME
-#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
-#if CONFIG_DEBUG_RAM_SETUP
- sdram_dump_mchbar_registers();
-
- {
- /* This will not work if TSEG is in place! */
- u32 tom = pci_read_config32(PCI_DEV(0, 2, 0), 0x5c);
-
- printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom);
- ram_check(0x00000000, 0x000a0000);
- ram_check(0x00100000, tom);
- }
-#endif
-#endif
-#endif
-
- MCHBAR16(SSKPD) = 0xCAFE;
-
- cbmem_was_initted = !cbmem_recovery(boot_mode==2);
-
-#if CONFIG_HAVE_ACPI_RESUME
- /* If there is no high memory area, we didn't boot before, so
- * this is not a resume. In that case we just create the cbmem toc.
- */
- if ((boot_mode == 2) && cbmem_was_initted) {
- void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME);
-
- /* copy 1MB - 64K to high tables ram_base to prevent memory corruption
- * through stage 2. We could keep stuff like stack and heap in high tables
- * memory completely, but that's a wonderful clean up task for another
- * day.
- */
- if (resume_backup_memory)
- memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE,
- HIGH_MEMORY_SAVE);
-
- /* Magic for S3 resume */
- pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD,
- SKPAD_ACPI_S3_MAGIC);
- }
-#endif
+ i945_late_initialization(s3resume);
timestamp_add_now(TS_END_ROMSTAGE);