summaryrefslogtreecommitdiff
path: root/src/mainboard/arima/hdama/mainboard.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/arima/hdama/mainboard.c')
-rw-r--r--src/mainboard/arima/hdama/mainboard.c247
1 files changed, 246 insertions, 1 deletions
diff --git a/src/mainboard/arima/hdama/mainboard.c b/src/mainboard/arima/hdama/mainboard.c
index 82041282f6..bbc6f53716 100644
--- a/src/mainboard/arima/hdama/mainboard.c
+++ b/src/mainboard/arima/hdama/mainboard.c
@@ -3,23 +3,268 @@
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
+#include <cpu/p6/msr.h>
#include <arch/io.h>
#include <device/chip.h>
#include "../../../northbridge/amd/amdk8/northbridge.h"
#include "chip.h"
+#include "pc80/mc146818rtc.h"
+
+
unsigned long initial_apicid[CONFIG_MAX_CPUS] =
{
0, 1,
};
+#define SMBGSTATUS 0xe0
+#define SMBGCTL 0xe2
+#define SMBHSTADDR 0xe4
+#define SMBHSTDAT 0xe6
+#define SMBHSTCMD 0xe8
+#define SMBHSTFIFO 0xe9
+
+#define SMBUS_TIMEOUT (100*1000*10)
+
+static inline void smbus_delay(void)
+{
+ outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(unsigned smbus_io_base)
+{
+ unsigned long loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned short val;
+ smbus_delay();
+ val = inw(smbus_io_base + SMBGSTATUS);
+ if ((val & 0x800) == 0) {
+ break;
+ }
+ if(loops == (SMBUS_TIMEOUT / 2)) {
+ outw(inw(smbus_io_base + SMBGSTATUS),
+ smbus_io_base + SMBGSTATUS);
+ }
+ } while(--loops);
+ return loops?0:-2;
+}
+
+static int smbus_wait_until_done(unsigned smbus_io_base)
+{
+ unsigned long loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned short val;
+ smbus_delay();
+
+ val = inw(smbus_io_base + SMBGSTATUS);
+ if (((val & 0x8) == 0) | ((val & 0x437) != 0)) {
+ break;
+ }
+ } while(--loops);
+ return loops?0:-3;
+}
+
+static int smbus_send_byte(unsigned smbus_io_base, unsigned device, unsigned value)
+{
+ unsigned char global_status_register;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2;
+ }
+
+ /* setup transaction */
+ /* disable interrupts */
+ outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+ /* set the device I'm talking too */
+ outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+ /* set the command/address... */
+ outb(0, smbus_io_base + SMBHSTCMD);
+ /* set up for a send byte */
+ outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ /* Do I need to write the bits to a 1 to clear an error? */
+ outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+ /* set the data word...*/
+ outw(value, smbus_io_base + SMBHSTDAT);
+
+ /* start the command */
+ outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3;
+ }
+ global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+ if (global_status_register != (1 << 4)) {
+ return -1;
+ }
+ return 0;
+}
+
+static int smbus_recv_byte(unsigned smbus_io_base, unsigned device)
+{
+ unsigned char global_status_register;
+ unsigned char byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2;
+ }
+
+ /* setup transaction */
+ /* disable interrupts */
+ outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+ /* set the device I'm talking too */
+ outw(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+ /* set the command/address... */
+ outb(0, smbus_io_base + SMBHSTCMD);
+ /* set up for a send byte */
+ outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ /* Do I need to write the bits to a 1 to clear an error? */
+ outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+ /* set the data word...*/
+ outw(0, smbus_io_base + SMBHSTDAT);
+
+ /* start the command */
+ outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3;
+ }
+
+ global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+ /* read results of transaction */
+ byte = inw(smbus_io_base + SMBHSTDAT) & 0xff;
+
+ if (global_status_register != (1 << 4)) {
+ return -1;
+ }
+ return byte;
+}
+
+#if 0
+static int smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
+{
+ unsigned char global_status_register;
+ unsigned char byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2;
+ }
+
+ /* setup transaction */
+ /* disable interrupts */
+ outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+ /* set the device I'm talking too */
+ outw(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+ /* set the command/address... */
+ outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+ /* set up for a byte data read */
+ outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x2), smbus_io_base + SMBGCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ /* Do I need to write the bits to a 1 to clear an error? */
+ outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+ /* clear the data word...*/
+ outw(0, smbus_io_base + SMBHSTDAT);
+
+ /* start the command */
+ outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3;
+ }
+
+ global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+ /* read results of transaction */
+ byte = inw(smbus_io_base + SMBHSTDAT) & 0xff;
+
+ if (global_status_register != (1 << 4)) {
+ return -1;
+ }
+ return byte;
+}
+
+static int smbus_write_byte(unsigned smbus_io_base, unsigned device, unsigned address, unsigned char val)
+{
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return -2;
+ }
+
+ /* setup transaction */
+ /* disable interrupts */
+ outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)),
+ smbus_io_base + SMBGCTL);
+ /* set the device I'm talking too */
+ outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+ outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+ /* set up for a byte data write */ /* FIXME */
+ outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+ /* clear any lingering errors, so the transaction will run */
+ /* Do I need to write the bits to a 1 to clear an error? */
+ outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+ /* clear the data word...*/
+ outw(val, smbus_io_base + SMBHSTDAT);
+
+ /* start the command */
+ outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return -3;
+ }
+ return 0;
+}
+#endif
+
+#define SMBUS_MUX 0x70
+static void mainboard_init(device_t dev)
+{
+ /* Set the mux to see the temperature sensors */
+ dev = dev_find_device(0x1022, 0x746b, 0);
+ if (dev) {
+ unsigned smbus_io_base;
+ unsigned device;
+ int result;
+ int mux_setting;
+ device = SMBUS_MUX;
+ mux_setting = 1;
+ smbus_io_base = pci_read_config32(dev, 0x58) & ~1;;
+ result = smbus_send_byte(smbus_io_base, device, mux_setting);
+ if ((result < 0) ||
+ (smbus_recv_byte(smbus_io_base, device) != mux_setting)) {
+ printk_err("SMBUS mux would not set to %d\n", mux_setting);
+ }
+
+ }
+ else {
+ printk_err("SMBUS_controller not found\n");
+ }
+}
+
static struct device_operations mainboard_operations = {
.read_resources = root_dev_read_resources,
.set_resources = root_dev_set_resources,
.enable_resources = enable_childrens_resources,
- .init = 0,
+ .init = mainboard_init,
.scan_bus = amdk8_scan_root_bus,
.enable = 0,
};
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-30 03:50:56 +0000